JW5250S

1A, 6V，
，1.5MHz, 50uA IQ
Synchronous Step-Down Converter
Parameters Subject to Change Without Notice

DESCRIPTION FEATURES
The JW ®5250S is a current mode monolithic buck
2.5V to 6.0V operating input range
switching regulator. Operating with an input range
Up to 1A output current
of 2.5V-6.0V, the JW5250S delivers 1A of
Up to 94% peak efficiency
continuous output current with integrated
Internal Soft-Start
P-Channel and N-Channel MOSFETs. The
1.5MHz switching frequency
internal synchronous power switches provide high
Input under voltage lockout
efficiency. At light loads, the regulator operate in
Hot-plug in protection
low frequency to maintain high efficiency and low
Short circuit protection
output ripples.
Thermal protection
The JW5250S guarantees robustness with hiccup
Available in SOT23-5/SOT563 package
output short-circuit protection, FB short-circuit
protection, start-up current run-away protection, APPLICATIONS
input under voltage lockout and hot-plug in, and
5V or 3.3V Point of Load Conversion
thermal protection.
Set Top Boxes
The JW5250S is available in 5-pin SOT23-5 and
Telecom/Networking Systems
SOT563 package, which provides a compact

Storage Equipment
solution with minimal external components.

GPU/DDR Power Supply
Company’s Logo is Protected, “JW” and “JOULWATT” are Registered
Trademarks of JoulWatt technology Inc.

TYPICAL APPLICATION

JW5250S Rev.0.1 JoulWatt® Proprietary Information. Patent Protected.

1
Unauthorized Photocopy and Duplication Prohibited.
JW5250S JoulWatt

ORDER INFORMATION

1) 2)
DEVICE PACKAGE TOP MARKING

JWDX
JW5250SSOTI#TRPBF SOT563
YWLL
JWK8X
JW5250SSOTA#TRPBF SOT23-5
YWLLL

Note ：

PIN CONFIGURATION

TOP VIEW

EN 1 5 FB

GND 2

SW 3 4 VIN

SOT23-5

ABSOLUTE MAXIMUM RATING1）

EN, FB Pins ...................................................................................................................-0.3V to 7.0 V
Vin, SW Pins .....................................................................-0.3V(-1.7V for 20ns) to 7.0V(7.1V for 70ns)
Junction Temperature. 2) 3) ................................................................................................................150ºC
Lead Temperature ......................................................................................................................260ºC
Storage Temperature .................................................................................................. -65ºC to +150ºC
ESD Susceptibility (Human Body Model) ......................................................................................... 3.5kV

RECOMMENDED OPERATING CONDITIONS

Input Voltage VIN ...............................................................................................................2.5V to 6.0V
Output Voltage Vout..................................................................................................................0.6V to VIN
Operating Junction TemperatureC.....................................................................................-40ºC to 125ºC

JW5250S Rev.0.1 JoulWatt® Proprietary Information. Patent Protected.

2
Unauthorized Photocopy and Duplication Prohibited.
JW5250S JoulWatt

THERMAL PERFORMANCE4） θJA θJc

SOT23-5 .............................................................................................................................220....130ºC/W
SOT563................................................................................................................................130.....60ºC/W

Note ：
1) Exceeding these ratings may damage the device.
2) The JW5250S guarantees robust performance from -40°C to 150°C junction temperature. The junction temperature
range specification is assured by design, characterization and correlation with statistical process controls.
3) The JW5250S includes thermal protection that is intended to protect the device in overload conditions. Thermal
protection is active when junction temperature exceeds the maximum operating junction temperature. Continuous
operation over the specified absolute maximum operating junction temperature may damage the device.
4) Measured on JESD51-7, 4-layer PCB.

JW5250S Rev.0.1 JoulWatt® Proprietary Information. Patent Protected.

3
Unauthorized Photocopy and Duplication Prohibited.
JW5250S JoulWatt

ELECTRICAL CHARACTERISTICS

VIN=5V, TA=25 ℃, unless otherwise stated.

Item Symbol Condition Min. Typ. Max. Units
VIN Under Voltage Lockout Threshold VIN_UVLO VIN rising 2.3 2.4 2.5 V
VIN Under Voltage Lockout Hysteresis VIN_UVLO_HYST VIN falling 200 mV
VIN Hot-plug in Protection Threshold VIN_OVP VIN rising 6.6 6.8 7.0 V
VIN Hot-plug in Protection Hysteresis VIN_OVP_HYST VIN falling 400 mV
Shutdown Current ISHDN VIN=6.0V, VEN=0V 0.1 1 µA
VEN=5V, IOUT=0A,
Quiescent Current IQ 50 µA
VFB=VREF*105%
Regulated Feedback Voltage VFB 2.5V<VIN<6.0V 0.591 0.6 0.609 V
5)
PFET On Resistance RDSON_P VIN=3.6V, ISW=200mA 250 mΩ
5)
NFET On Resistance RDSON_N VIN=3.6V, ISW=-200mA 160 mΩ
VIN=6.0V, VEN=0V,
PFET Leakage Current ILEAK_P 1 uA
VSW=0V
VIN=6.0V, VEN=0V,
NFET Leakage Current ILEAK_N 1 uA
VSW=6.0V
5)
PFET Current Limit ILIM_TOP 2.0 A
5)
NFET Current Limit ILIM_BOT 1.5 A
Switch Frequency FSW IOUT=1A 1,5 MHz
5)
Minimum On Time TON_MIN 100 ns
5)
Maximum Duty Cycle DMAX 100 %
EN Rising Threshold VEN_TH VEN rising, FB=0.3V 1.5 V
EN Falling Threshold VEN_HYST VEN falling, FB=0.3V 0.4 V
Thermal Shutdown Threshold
5)
TSHDN 150 ℃
Thermal Shutdown Hysteresis THYST 20 ℃
Note:
5) Guaranteed by design

JW5250S Rev.0.1 JoulWatt® Proprietary Information. Patent Protected.

4
Unauthorized Photocopy and Duplication Prohibited.
JW5250S JoulWatt

PIN DESCRIPTION
Pin Name Description
1 EN Drive EN pin high to turn on the regulator and low to turn off the regulator.
2 GND Ground pin.
SW is the switching node that supplies power to the output. Connect the output LC filter from
3 SW
SW to the output load.
Input voltage pin. VIN supplies power to the IC. Connect a 2.5V to 6.0V supply to VIN and
4 VIN
bypass VIN to GND with a suitably large capacitor to eliminate noise on the input to the IC.
Output feedback pin. FB senses the output voltage and is regulated by the control loop to
5 FB
0.6V. Connect a resistive divider at FB.

BLOCK DIAGRAM

JW5250S Rev.0.1 JoulWatt® Proprietary Information. Patent Protected.

5
Unauthorized Photocopy and Duplication Prohibited.
JW5250S JoulWatt

FUNCTIONAL DESCRIPTION

The JW5250S is a constant on-time control, Power Switches

synchronous, step-down regulator. It regulates
P-channel and N-channel MOSFET switches
input voltages from 2.5V~6.0V down to an
are integrated on the JW5250S to down convert
output voltage as low as 0.6V, and is capable of
the input voltage to the regulated output voltage.
supplying up to 1A of load current.
Short Circuit Protection
When output is shorted to ground, the switching
Constant On-time Control
frequency is reduced to prevent the inductor
The JW5250S utilizes constant on-time control current from increasing beyond PFET current
to regulate the output voltage. The output limit. If short circuit condition holds for more than
voltage is measured at the FB pin through a 1024 cycles, both PFET and NFET are forced
resistive voltage divider and the error is off and can be enabled again after 8ms. This
amplified by the internal transconductance error procedure is repeated as long as short circuit
amplifier. condition is not removed.
Output of the internal error amplifier is
compared with the switch current measured
internally to control the output current limit. FB Short Circuit Protection
When FB is shorted to ground and holds for
more 16 cycles, NFET will be turned off after
PFM Mode
inductor current drops to zero, and then both
The JW5250S operates in PFM mode at light PFET and NFET are latched off. When short
load. In PFM mode, switch frequency is circuit condition is removed, it can be recovery.
continuously controlled in proportion to the load
current, i.e. switch frequency decreases when
load current drops to boost power efficiency at Hot Plug-in Protection
light load by reducing switch-loss, while switch
frequency increases when load current rises, When input voltage is greater than hot plug-in
minimizing output voltage ripples. protection threshold, typical 6.8V, it will disable
JW5250S. When input voltage decrease below
6.4V, it will be enabled again.

Shut-Down Mode
The JW5250S operates in shut-down mode
Thermal Protection
when voltage at EN pin is driven below 0.4V. In
shut-down mode, the entire regulator is off and When the temperature of the JW5250S rises
the supply current consumed by the JW5250S above 150°C, it is forced into thermal shut-down.
drops below 1uA. Only when core temperature drops below 130°C
can the regulator becomes active again.

JW5250S Rev.0.1 JoulWatt® Proprietary Information. Patent Protected.

6
Unauthorized Photocopy and Duplication Prohibited.
JW5250S JoulWatt

REFERENCE DESIGN

Reference 1：
：
VIN : 2.5V ~ 6.0 V
VOUT: 3.3V
IOUT : 0~1A

Reference 2：
：
VIN : 2.5V ~ 6.0 V
VOUT: 1.8V
IOUT : 0~1A

JW5250S Rev.0.1 JoulWatt® Proprietary Information. Patent Protected.

7
Unauthorized Photocopy and Duplication Prohibited.
JW5250S JoulWatt

PACKAGE OUTLINE

SOT23-5 UNIT: mm

JW5250S Rev.0.1 JoulWatt® Proprietary Information. Patent Protected.

8
Unauthorized Photocopy and Duplication Prohibited.
JW5250S JoulWatt

SOT563 UNIT: mm

JW5250S Rev.0.1 JoulWatt® Proprietary Information. Patent Protected.

9
Unauthorized Photocopy and Duplication Prohibited.
JW5250S JoulWatt

IMPORTANT NOTICE

Joulwatt Technology Inc. reserves the right to make modifications, enhancements, improvements,

corrections or other changes without further notice to this document and any product described herein.

Any unauthorized redistribution or copy of this document for any purpose is strictly forbidden.

Joulwatt Technology Inc. does not warrant or accept any liability whatsoever in respect of any products

purchased through unauthorized sales channel.

Copyright © 2018 JW5250S Incorporated.

All rights are reserved by Joulwatt Technology Inc.

JW5250S Rev.0.1 JoulWatt® Proprietary Information. Patent Protected.

10
Unauthorized Photocopy and Duplication Prohibited.