BONETTI

BONETTI CMI GATE VALVES

API 6A-0657
API 6D-0404
BONETTI CMI series High Pressure Valves
The Company CMI Pasquini S.p.A. originate in 1921 with the We can say without hesitation that CMI Pasquini in those years
establishment of the firm "Cocard Italiana di Ing. Pasquini & C.". have been the only Italian producer in a position to ensure such
This company markets in the early years the valves manufactu- products and their continuous development in accordance with
red by the French company, then starts a manufacturing activity the requirements of the users, which are not only Italian but also
under licence and year after year a considerable rise in local pro- located in foreign countries due to direct and indirect supplies.
duction is recorded in comparison with the sales of the foreign
products. In consideration of product importance, very close contacts and
collaboration with customers have always been fundamental to
The Second World War has a remarkable influence in this direc- verify from the beginning any possibility in the operating condi-
tion; the previous experience is used in order to develop their tions of the plants. That has been and is the constant policy of
own know-how and that permits the production of valves desi- CMI Pasquini.
gned and manufactured completely in Italy with no more collabo-
ration with the French company. End 1984 - thanks to the partnership of Cesare Bonetti S.p.A.,
leader in Italy and abroad in the field of high quality industrial val-
In 1950 the company name is "Costruzioni Meccaniche ves - a new substantial boost is given to modernization of mana-
Industriali già Ing. Gino Pasquini S.p.A." and this trade name has ging, planning and manufacturing facilities and methods.
been maintained also after 1957, that is after the death of the
company founder. In the sixties - the period of the large industrial In 1992 the Company was merged to Cesare Bonetti S.p.A. as
expansion in Italy - CMI Pasquini S.p.A. are becoming very CMI Division and now the trademark CMI identify such series
important in the field of valves for heavy duty on the new ther- of BONETTI High Pressure valves.
moelectric, chemical and petrochemical plants.

INDEX
Page Page
Construction details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5-6
Gate Valves, parallel slide bolted bonnet
Gate valves, split wedge, bolted bonnet - ASME Class 600 - size 1.1/2" to 4" (DN 40 to 100) . . . . . . . . 17
- ASME Class 600
Size 1.½” to 4” (DN 40 to 199) . . . . . . . . . . . . . . . . . . . . . . . . . .7 Gate Valves, parallel slide pressure seal bonnet
- ASME Class 600 - size 4" to 24" (DN 100 to 600) . . . . . 18-19
Gate valves, split wedge, pressure seal bonnet - ASME Class 900 - size 2" to 24" (DN 50 to 600) . . . . . . 20-21
- ASME Class 600 - size 4” to 24” (DN 100 to 600) . . . . . . . . .8-9 - ASME Class 1500 - size 2" to 24" (DN 50 to 600) . . . . . 22-23
- ASME Class 900 - size 2” to 24” (DN 50 to 600) . . . . . . . .10-11 - ASME Class 2500 - size 2" to 24" (DN 50 to 600) . . . . . 24-25
- ASME Class 1500 - size 2” to 24” (DN 50 to 600) . . . . . . .12-13
- ASME Class 2500 - size 2” to 24” (DN 50 to 600) . . . . . . .14-15 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Gate valves, split wedge, seal welded bonnet Buttwelding Ends ASME B16.25-1979 . . . . . . . . . . . . . . . .28-29
- ASME Class 1500, 2500, 3000 Special Class
size 2.½” (DN 65) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Figure Number Index

Fig. No. Page Fig. No. Page Fig. No. Page Fig. No. Page Fig. No. Page Fig. No. Page

101 4 107 28 122.1 8 128 14 132.1 18 137 23

102 5 108 28 123 9 129 15 133 19 138 24
103 5 109 28 123.1 9 130 16 133.1 19 139 25
104 5 110 28 125 11 131 17 134 20
105 6 121 7 126 12 131.1 17 135 21
106 6 122 8 127 13 132 18 136 22

Foreword Bonetti/CMI are always assisting their customers, both enginee-

ring/manufacturing companies and end users, by integrating their
Bonetti’s “CMI” production range consists of 3 sections: own know-how with that of the customers.
Section 1 - Gate Valves Consequently CMI production line is uptodated and meets the
Section 2 - Globe, Check, Stop-Check Valves highest engineering and quality levels. The pressure and temperatu-
Section 3 - Valves for Chemical Applications. re values as well the sizes listed in this bulletin shall be not
All above listed valves are suitable for high pressures and tempera- considered as a boundary of CMI's production range. As always
tures (valves under Section 3 are also for application at ambient done, Bonetti can produce CMI special valves to meet customer's
and/or very low temperature conditions). requirements.

Main technical features of these valves have been verified and opti- Bonetti have already supplied successfully CMI valves having rating
mized during 50 years directly by Bonetti/CMI on electric power higher than Class 2500 Ib, for instance:
plants, in particular with applications on vessel feedwater, steam - Gate Valves 20" for main shutoff of boilers, manufactured accor-
shutoff, against backflow as well on chemical and petrochemical ding to interpolated rating 2860 Ib Special Class,
plants. - Gate Valves 2.1/2" for shutoff of boiler safety valve, manufactured
according to rating 4500 Ib Class.
Details on long Bonetti/CMI experience can be found in "Users List"
with indication of valves fitted on thermoelectric power plants and Even the materials listed in this bulletin for bodies, bonnets and trims
other installations, where high reliability under severe operating con- shall be not considered as a limit. Bonetti often manufacture CMI val-
ditions is a constant request. ves in special materials, in accordance with special design require-
ments and customer's requests.

2 BONETTI
Section 1
CMI Gate Valves
This catalogue describes our gate valves only. The other Exceptionally and compatibly with our moulds and die equip-
Sections of Cesare Bonetti’s CMI valves production are ment, some components usually of cast steel can be made
described in other catalogues. of the corresponding forged steel.

DESIGN The Material Codes having their tag followed by a —Z are

Special constructions, slightly different from the standard
Like all gate valves, CMI gate valves are straight through
one.
two-directions flow valves, unless equalizer pipe is installed.

OPERATIONS STANDARDS
Bonetti’s CMI gate valves have been designed, rated, manu-
Like all gate valves, CMI gate valves have to be utilized all-
factured and inspected, where applicable, in accordance with
open or all-closed.
the most used international Standards, namely:
- ASME B16.34 -
CONNECTIONS Steel valves, Flanged and Butt-welding Ends
CMI Gate valves illustrated in this catalogue have the follo- - ASME B16.10 -
wing pipe connections: Face-to-Face and End-to-End Dimensions
- Applicable Sections of ASME Boiler and Pressure Vessel
- Flanged Ends according to ASME B16.5 (usually for Class Code, including Nuclear Section III.
600 Ib only, not for higher pressure Classes) or to different - MSS SP 44 Steel pipe line flanges
Standard, - MSS SP 61 Hydrostatic testing of steel valves
- Buttwelding Ends according to ASME B16.25 (see pages - API Standard 598 - Valve inspection and test
30 and 31) or to different Standard. - ASME B16.25 - Buttwelding Ends
- TRD 110 (on request).
We can supply gate valves with connections different from
the above, e.g.: Socket welding Ends to ASME B16.11, or dif- SHIPPING PREPARATION
ferent.
CMI valves are supplied only after undergoing the prescribed
dimensional and operating inspections.
SIZES For storage and shipment valves are adequately protected.
Bonetti’s CMI gate valves are currently manufactured in the
sizes from 1.1/2" (DN 40) up to 24" (DN 600). REQUESTS AND ORDERS
To guarantee perfect valve operation please state:
RATINGS - Size of the valve (DN)
Bonetti’s CMI gate valves currently manufactured as stan- - Fluid
dard are suitable for the following Ratings: - Design conditions (pressure and temperature) or Rating
ASME Class 600 - 900 - 1500 - 2500 - Operating conditions (pressure and temperature)
- Operating Δp
As said in the foreword, Bonetti’s experience in CMI valves is - Connections type
not limited within above limits, and we can supply valves up - Operating type (by handwheel, actuator, etc.)
to ASME Class 4500 or Special Classes. - Installation type, that is the orientation of the valve within
the space
Tables showing max operating conditions (pressure and tem- - Wanted materials
perature) for Rating and Material Code are on page 30. - Optionals
- Possible environmental and operating peculiarities.
We want to point out that Cesare Bonetti’s CMI valves are
overdimensioned with respect to international Standards.
Actual max operating conditions can be given on request.

MATERIAL CODE
CMI Gate valves are manufactured in different Material
Codes. For "Material Code" we mean the material quality of
the valve components.

In the descriptive pages relevant to each valve (page 7 up to

25) are clearly indicated the materials used for the more
important components and Material Code.

Here below we list the main characteristic elements of the dif-

ferent Material Codes:

Material Material for Trim and

Code Body and Bonnet Hardfaced Surfaces

CB ASTM A216 WCB Stellite Gr. 6

C6 ASTM A217 WC6 Stellite Gr. 6
C9 ASTM A217 WC9 Stellite Gr. 6
C12A ASTM A217 C12A Stellite Gr. 6

BONETTI 3
CMI Gate valves
ASME Class 600 - 900 - 1500 - 2500
Construction Details

23

7 9

21
2

1
4
3

Fig. 101

4 BONETTI
1 BODY Fig. 102
Available of Carbon steel and various alloy steels, is usually
of cast material. For some sizes and classes can be of forged
material.
Machining is properly performed, for perfect aligment of all
elements. In its inner two fine machined grooves guide the
relevant tongues of the wedge or disk.
The seat rings are welded-in after complete finish. When the
bonnet is pressure seal (Fig. 102), a stainless steel inlay (26)
on the body-gasket sealing area guarantees effective and
1 Body
long-life bonnet closure.
2 Pressure seal
bonnet
10 Pressure seal
3 SEAT RINGS gasket
Both seat rings are stellite hardfaced, completely machined 12 Segmental ring
and then welded into the body. Their shape does not allow 25 Spacer ring
distorsions of sealing surfaces by pressure and temperature 26 Stainless steel
changes. inlay
Bore dimension of the seat rings is according to ANSI B16.34
- 1981 Table G-A1 and tolerances given on Paragraph 6.1.2.

2 BONNET
Usually of the same material as body. It can be: Fig. 103
- bolted to the body, or
- pressure seal, or
- seal welded to the body.

Pressure sea! bonnet is pushed from inner pressure

against pressure seal gasket (10) which is kept in place by
the spacer ring (25) and the segmental ring (12), see Fig.
102, or directly by the yoke. Specially accurate are: 1 Body
- easy beginning of pressure seal 4 Split wedge
- easy disassembling and reassembling. 5 Spacer
Stem backseat area is hardfaced, usually Stellited. 27 Hardfaced
tongues
4 WEDGE
Usually two-pieces split wedge, for perfect sealability to the
seat rings. The wedge tongues are trapped and fully guided
by the body grooves which are long enough for the whole
stroke. The wedge is directly moved by the stem head
trapped between wedge halves.

This way: the stem is non-revolving; the point at which the

force acts is as down as possible; the height and the weight
of the valve are minimized.
Fig. 104
Wedge seats are stellite hardfaced. Wedge tongues are
hardfaced, usually stellited (27).

In the gate wedges, the spacer (5) trasmits the closing force 4 Split wedge
through the wedge halves against the seat rings. To facilitate 5 Spacer
field repairability, the spacer can be replaced with a thicker 6 Stem
one, without replacing the whole wedge. In the parallel slide
valves, the disk spring (5.1) keeps both disk halves against
the seat rings, to begin closure seal.

6 STEM
Of 13% Chrome stainless steel, heat treated against corro-
sion and for the best mechanical features. Above the head
trapped between the two wedge halves (Fig. 104) the stem
has a conical shoulder which - when the valve is fully open -
is pulled against bonnet for effective backseating with axial
(not rotating) movement.

In the parallel slide valves, the stem can not rotate because
of indexing stop (21) which acts two more functions: the pos-
itive end of the stroke; the index of actual disk position.

BONETTI 5
18 YOKE
Fig. 105
Usually of Carbon steel, is very rugged and withstands the
Equalizer pipe
thrusts of eventual actuator. Large windows allow easy acces
and ventilation of packing area. In the major sizes, the yoke
is locked to the body by a two pieces clamp (19) and two
clamp bolts (20). This connection is very stiff and allows easy
field maintenance. In the minor sizes, the yoke is screwed
and fixed to the body and permits same advantages.

7 YOKE NUT
Usually of special bronze, but on request of Ni Resist
A439 D2. Widely sized, is very fine machined, to minimize
friction with stem. Every seizing possibility is excluded. Nut is FLOW
rotated by the handwheel through a key or by the actuator
through relevant adapter. Rotation of yoke nut is guaranted
by two roller bearings, when necessary by two tapered ones.

9 PACKING
Is made of an adequate number of preformed rings of an
approved high pressure - temperature quality. Special quali-
ties available on request.
The whole system Packing - Packing Chamber - Gland Stud Fig. 106
and Flange (15 and 15.1) - Gland Studs (16) is very careful- Equalizer pipe and
ly designed and realized. It is as far as possible from fluid By-pass
flow, for longer packing life.

23 HANDWHEEL
Spoke handwheel is currently supplied. Other kind of control
is available and in some case is indispensable for good oper- FLOW
ation, for instance:
- chain wheel
- gear operator, eventually with universal joint and floor stand
- impactor handwheel
- electro-hydraulic actuator
- pneumatic actuator.
Actuator is usually supplied already mounted on the applica-
ble valve, for greater guarantee of the customer. In this field
customer's requirements are very different; therefore this cat-
alogue describes our valves without actuator even though it
is indispensable for operating. Our Technical Service usually
provides all data for exact fixing of supply.

OPTIONALS
In some operating conditions some optionals are advisable
and sometimes indispensable for good operation of the
valve, for instance:
- By-pass. Is a pipe outside the valve, connects the upstream
and the downstream of the valve and can be opened or
closed by the small by-pass valve to facilitate the operation
of the main valve.
- Equalizer pipe. Fig. 105. Is a pipe outside the valve and
connects the upstream and the central part of the valve
body. The equalizer pipe avoids dangerous overpressure in
the valve body when the valve is closed and the piping sys-
tem is reheated.
- Equalizer pipe and By-pass. Fig. 106. Is the installation on
the same valve of both aforesaid devices.

As for the pieces named in this pages but not itemized in Fig.
101, see the details at the foot of every single descriptive
page.

6 BONETTI
BONETTI CMI Gate Valves - split wedge - bolted bonnet
ASME Class 600
Sizes 1.1/2" to 4" (DN 40 to 100)
Buttwelding or Flanged Ends
Material Codes currently manufactured are: CB, C6.
Fig. 121.1
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 121)
- Flanged Ends RF ASME B16.5 (Fig. 121.1).

The relevant Ratings for each Material Code are shown on

7 page 30, for ASME Class 600.
22 23
Notes:
24 1 These valves have split wedge and intermediate spacer.
6
16 3 Dimensions expressed in millimeters, but converted from ori-
15.1 ginal Standard in inches, are rounded.
9 4 Exceptionally and compatibly with our moulds and die equip-
15
8 ment, some components usually of cast steel can be made
of corresponding forged steel.
2
5 Body-Bonnet sealability can be obtained by means of the
10.2 10.1 Gasket (10.1) or the Ring Joint (10.2).
24 7 Body Lenght L1 is according to ASME B16.10-Regular
Pattern.
11 4 8 On request flanges finishing can be other than RF. 12 The
5 Weight listed in the table is not binding.
3
1 Fig.121 Fig.121.1

SIZE DIMENSIONS BW ENDS RF FLANGED ENDS

B C V L1 Weight D E F Holes ∅ Circle L1 Weight
mm inches mm mm mm mm kg mm mm mm No mm mm mm kg
40 1.1/2" 410 465 250 241,5 23 156 22,5 73 4 22 114 241,5 30
50 2" 450 510 250 292 28 165 25,5 92 8 19 127 292 48
65 2.1/2" 520 600 250 330 47 191 29,5 105 8 22 149 330 60
80 3" 610 705 300 355,5 58 210 32 127 8 22 168 355,5 76
100 4" 665 780 350 432 85 273 38 157 8 25 216 432 121

Item Component Material for Material Code

No Component CB C6
1 Body A216 WCB A217 WC6
2 Bonnet A216 WCB A217 WC6
3 Seat rings A105 + Stellite A182 F11 -I- Stellite
4 Wedae A216 WCB + Stellite A217 WC6 + Stellite
5 Spacer A182 F6 A182 F6
6 Stem A182 F6 A182 F6
7 Yoke nut B 148-952 B1 48-952
8 Backseat facing Stellite Stellite
9 Packing Graphite Graphite
10.1 Body^Bonnet gasket AISI 304 AISI 304
10.2 Body-Bonnet ring joint AISI 316 AISI 316
11 Body-Bonnet bolt A193 B7 A193 B7
15 Gland A182 F304 A 182 F304
15.1 Gland flange A105 A105
16 Gland stud A193 B7 A193 B7
22 Roller bearing Standard Standard
23 Handwheel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H

BONETTI 7
BONETTI CMI Gate Valves - split wedge - pressure seal bonnet
ASME Class 600
Sizes 4" to 5" (DN 100 to 125)
Buttwelding or Flanged Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 122
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 122)
- Flanged Ends RF ASME B16.5 (Fig. 122.1).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 600.
7 23
Notes:
22 24 1 These valves have split wedge and intermediate spacer.
15.1 3 Dimensions expressed in millimeters, but converted from
6
original Standard in inches, are rounded.
15 4 Exceptionally, and compatibly with our moulds and die
18
16 equipment, some components usually of cast steel can be
14 made of corresponding forged steel.
9
6 Body Lenght L is according to ASME B 16.10-Short Pattern.
8 7 Body Lenght L1 is according to ASME B16.10-Regular
10 Pattern.
2
8 On request flanges finishing can be other than RF.
3 4 12 The Weight listed in the table is not binding.
1 5

Fig.122 Fig.122.1

SIZE DIMENSIONS BW ENDS RF FLANGED ENDS

B C V L1 Weight D E F Holes ∅ Circle L1 Weight
mm inches mm mm mm mm kg mm mm mm No mm mm mm kg
100 4" 555 660 350 305 72 273 38 157 8 25 216 432 108
125 5" 630 750 400 381 105 330 45 186 8 29 266 508 165

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Wedge A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5 Spacer A182 F6 A182 F6 A182 F6 A182 F6
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B 148-952 B 148-952 B 148-952 B 148-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A182 F304 A182 F304 A182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
18 Yoke A216 WCB A216 WCB A216 WCB A216 WCB
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

8 BONETTI
BONETTI CMI Gate Valves - split wedge - pressure seal bonnet
ASME Class 600
Sizes 6" to 24" (DN 150 to 600)
Buttwelding or Flanged Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 123
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 123)
- Flanged Ends RF ASME B16.5 (Fig. 123.1).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 600.
23 7
6 22 Notes:
1 These valves have split wedge and intermediate spacer.
15.1 24 3 Dimensions expressed in millimeters, but converted from
15 16 original Standard in inches, are rounded.
4 Exceptionally and compatibly with our moulds and die equip-
9 18 ment, some components usually of cast steel can be made
19 of corresponding forged steel.
24
6 Body Lenght L is according to ASME B16.10-Short Pattern.
20 7 Body Lenght L1 is according to ASME B16.10-Regular
13
12 Pattern.
14 8 On request flanges finishing can be other than RF.
10
2 12 The Weight listed in the table is not binding.
4
8
5
3 Fig.123 Fig.123.1
1

SIZE DIMENSIONS BW ENDS RF FLANGED ENDS

B C V L1 Weight D E F Holes ∅ Circle L1 Weight
mm inches mm mm mm mm kg mm mm mm No mm mm mm kg
150 6" 680 830 450 457 165 356 48 216 12 29 292 559 237
200 8" 880 1080 500 584 290 419 56 270 12 32 349 660 402
250 10" 1060 1305 600 711 505 508 64 324 16 35 432 787 685
300 12" 1165 1470 700 813 720 559 67 381 20 35 489 838 930
350 14" 1225 1560 800 889 1040 603 70 413 20 39 527 889 1290
400 16" 1405 1795 800 991 1305 686 76 470 20 42 603 991 1660
450 18" 1695 2130 1000 1092 1620 743 83 533 20 45 654 1092 2050
500 20" 1820 2295 1000 1194 2240 813 89 584 24 45 724 1194 2775
600 24" 2050 2620 1000 1397 2940 940 105 692 24 51 838 1397 3690

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Wedge A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5 Spacer A182 F6 A182 F6 A182 F6 A182 F6
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B1 48-952 B 148-95 2 B 148-952 B 148-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
12 Segmental ring AISI 420 AISI 420 AISI 420 AISI 420
13 Bonnet flange A105 A105 A105 A105
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A182 F304 A 182 F304 A 182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
18 Yoke A216 WCB A216 WCB A216 WCB A216 WCB
19 Clamp A216 WCB A216 WCB A216 WCB A216 WCB
20 Clamp bolt A193 B7 A193 B7 A193 B7 A193 B7
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

BONETTI 9
BONETTI CMI Gate Valves - split wedge - pressure seal bonnet
ASME Class 900
Sizes 2" to 5" (DN 50 to 125)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 124
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 124).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 900.

7 23 Notes:
1 These valves have split wedge and intermediate spacer.
22 24 3 Dimensions expressed in millimeters, but converted from
15.1 original Standard in inches, are rounded.
6
4 Exceptionally and compatibly with our moulds and die equip-
15 ment, some components usually of cast steel can be made
18
16 of corresponding forged steel.
14 6 Body Lenght L is according to ASME B16.10-Short Pattern.
9
12 The Weight listed in the table is not binding.
8
10 2
3 4
1 5

Fig.124

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
50 2" 480 535 300 216 30
65 2.1/2" 490 550 350 254 47
80 3" 500 560 400 305 50
100 4" 555 660 450 356 80
125 5" 650 770 500 432 130

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Wedge A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5 Spacer A182 F6 A182 F6 A182 F6 A182 F6
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B 148-952 B 148-952 B 148-952 B 148-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A182 F304 A182 F304 A182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
18 Yoke A216 WCB A216 WCB A216 WCB A216 WCB
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

10 BONETTI
BONETTI CMI Gate Valves - split wedge - pressure seal bonnet
ASME Class 900
Sizes 6" to 24" (DN 150 to 600)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 125
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 125). *
The relevant Ratings for each Material Code are shown on
page 30, for ASME Class 900.

Notes:
23 7 1 These valves have split wedge and intermediate spacer.
6 22 3 Dimensions expressed in millimeters, but converted from
original Standard in inches, are rounded.
15.1 24 4 Exceptionally and compatibly with our moulds and die equip-
15 16 ment, some components usually of cast steel can be made
of corresponding forged steel.
9 18 9 Body Lenght L is according to ASME B16.10-Short Pattern
19 up to 16" (DN 400); for larger sizes, CMI standard.
24
12 The Weight listed in the table is not binding.
20
13
12
14
10
2
4
8
5
3 Fig.125
1

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
150 6" 725 880 500 508 205
200 8" 905 1100 600 660 360
250 10" 1015 1265 700 787 660
300 12" 1170 1470 800 914 920
350 14" 1260 1590 800 991 1225
400 16" 1470 1840 1000 1092 1415
450 18" 1550 1965 1000 1219 1890
500 20" 1810 2250 1000 1321 2785
600 24" 1935 2490 1000 1549 4275

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Wedge A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5 Spacer A182 F6 A182 F6 A182 F6 A182 F6
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B1 48-952 B 148-95 2 B 148-952 B 148-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
12 Segmental ring AISI 420 AISI 420 AISI 420 AISI 420
13 Bonnet flange A105 A105 A105 A105
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A182 F304 A 182 F304 A 182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
18 Yoke A216 WCB A216 WCB A216 WCB A216 WCB
19 Clamp A216 WCB A216 WCB A216 WCB A216 WCB
20 Clamp bolt A193 B7 A193 B7 A193 B7 A193 B7
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

BONETTI 11
BONETTI CMI Gate Valves - split wedge - pressure seal bonnet
ASME Class 1500
Sizes 2" to 5" (DN 50 to 125)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 126
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 126).
The relevant Ratings for each Material Code are shown on
page 30, for ASME Class 1500.

Notes:
7 23 1 These valves have split wedge and intermediate spacer.
3 Dimensions expressed in millimeters, but converted from
22 24 original Standard in inches, are rounded.
15.1 4 Exceptionally and compatibly with our moulds and die equip-
6
ment, some components usually of cast steel can be made
15 of corresponding forged steel.
18
16 6 Body Lenght L is according to ASME B16.10 - Short Pattern.
14 12 The Weight listed in the table is not binding.
9
8
10 2
3 4
1 5

Fig.126

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
50 2" 415 475 250 216 33
65 2.1/2" 505 580 300 254 55
80 3" 505 580 350 305 60
100 4" 550 655 450 406 95
125 5" 610 730 500 483 160

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Wedge A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5 Spacer A182 F6 A182 F6 A182 F6 A182 F6
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B 148-952 B 148-952 B 148-952 B 148-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A182 F304 A182 F304 A182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
18 Yoke A216 WCB A216 WCB A216 WCB A216 WCB
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

12 BONETTI
BONETTI CMI Gate Valves - split wedge - pressure seal bonnet
ASME Class 1500
Sizes 6" to 24" (DN 150 to 600)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A
Fig. 127
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 127).

The relevant Ratings for each Material Code are showr on

page 30, for ASME Class 1500 Ib.

23 7 Notes:
6 22 1 These valves have split wedge and intermediate spacer.
3 Dimensions expressed in millimeters, but converted from
15.1 24 original Standard in inches, are rounded.
15 16 4 Exceptionally and compatibly with our moulds and die equip-
ment, some components usually of cas steel can be made
9 18 of corresponding forged steel.
19 11 Body Lenght L is according to ASME B16.10-Short Pattern
24
up to 20" (DN 500); for larger sizes CMI standard.
20 12 The Weight listed in the table is not binding.
13
12
14
10
2
4
8
5
3 Fig.127
1

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
150 6" 690 840 600 559 245
200 8" 880 1065 700 711 430
250 10" 1030 1260 800 864 720
300 12" 1240 1515 800 991 1100
350 14" 1350 1650 800 1067 1580
400 16" 1520 1860 1000 1194 1980
450 18" 1610 1995 1000 1346 2650
500 20" 1700 2130 1000 1473 3580
600 24" 2005 2530 1000 1943 5840

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Wedge A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5 Spacer A182 F6 A182 F6 A182 F6 A182 F6
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B1 48-952 B 148-95 2 B 148-952 B 148-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
12 Segmental ring AISI 420 AISI 420 AISI 420 AISI 420
13 Bonnet flange A105 A105 A105 A105
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A182 F304 A 182 F304 A 182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
18 Yoke A216 WCB A216 WCB A216 WCB A216 WCB
19 Clamp A216 WCB A216 WCB A216 WCB A216 WCB
20 Clamp bolt A193 B7 A193 B7 A193 B7 A193 B7
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

BONETTI 13
BONETTI CMI Gate Valves - split wedge - pressure seal bonnet
ASME Class 2500
Sizes 2" to 5" (DN 50 to 125)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 128
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 128).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 2500.

7 23 Notes:
1 These valves have split wedge and intermediate spacer.
22 24 3 Dimensions expressed in millimeters, but converted from
15.1 original Standard in inches, are rounded.
6
4 Exceptionally and compatibly with our moulds and die equip-
15 ment, some components usually of cast steel can be made
18
16 of corresponding forged steel.
14 6 Body Lenght L is according to ASME B16.10 - Short Pattern.
9
12 The Weight listed in the table is not binding.
8
10 2
3 4
1 5

Fig.128

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
50 2" 435 495 400 279 45
65 2.1/2" 515 580 450 330 71
80 3" 515 585 500 368 78
100 4" 640 735 600 457 135
125 5" 715 830 600 533 220

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Wedge A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5 Spacer A182 F6 A182 F6 A182 F6 A182 F6
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B 148-952 B 148-952 B 148-952 B 148-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A182 F304 A182 F304 A182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
18 Yoke A216 WCB A216 WCB A216 WCB A216 WCB
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

14 BONETTI
BONETTI CMI Gate Valves - split wedge - pressure seal bonnet
ASME Class 2500
Sizes 6" to 24" (DN 150 to 600)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 129
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 129).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 2500.

23 7 Notes:
6 22 1 These valves have split wedge and intermediate spacer.
3 Dimensions expressed in millimeters, but converted from
15.1 24 original Standard in inches, are rounded.
15 16 4 Exceptionally and compatibly with our moulds and die equip-
ment, some components usually of cast steel can be made
9 18 of corresponding forged steel.
19 10 Body Lenght L is according to ASME B16.10-Short Pattern
24
up to 18" (DN 450); for larger sizes, CMI standard.
20 12 The Weight listed in the table is not binding.
13
12
14
10
2
4
8
5
3 Fig.129
1

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
150 6" 765 890 700 610 365
200 8" 910 1075 700 762 635
250 10" 1090 1395 800 914 1090
300 12" 1240 1475 1000 1041 1610
350 14" 1265 1515 1000 1118 2060
400 16" 1480 1780 1000 1245 2965
450 18" 1610 1940 1000 1397 3800
500 20" 1705 2070 1000 1575 5120
600 24" 1850 2280 1000 1676 6300

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Wedge A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5 Spacer A182 F6 A182 F6 A182 F6 A182 F6
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B1 48-952 B 148-95 2 B 148-952 B 148-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
12 Segmental ring AISI 420 AISI 420 AISI 420 AISI 420
13 Bonnet flange A105 A105 A105 A105
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A182 F304 A 182 F304 A 182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
18 Yoke A216 WCB A216 WCB A216 WCB A216 WCB
19 Clamp A216 WCB A216 WCB A216 WCB A216 WCB
20 Clamp bolt A193 B7 A193 B7 A193 B7 A193 B7
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

BONETTI 15
BONETTI CMI Gate Valves - split wedge - seal welded bonnet
ASME Class 1500, 2500, 3000 Special Class
Size 2.1/2" (DN 65)
Buttwelding Ends
Material Codes currently manufactured are: C9-Z.
Fig. 130
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25.

Max operating conditions are:

3000 psi at 1020 °F (207 bar at 550 °C).
23
24 7 Notes:
- This valve has been expressly designed and realized as iso-
15.1 22 lating stop valve between pressure source and Vent valve
6 and can be closed only to allow servicing Vent valve without
16 shutting down the boiler.
9 - This valve is always supplied complete with a 9/16" by-pass
2 valve.
- Buttwelding Ends can be supplied semifinished.
8

28 4
1 5

Fig.130

Item Component Material for Material Code Dimensions

No Component C9-Z Inches millimeters

1 Body A217 WC9 Size 2.1/2" 65
2 Bonnet A217 WC9 Bore at seat rings 2.1/2" 65
3 Seat rings A182 F304 + Stellite B 20" 508
4 Wedqe A217 WC9 + Stellite C 23.3/16" 589
5 Spacer A182 F6 V 20" 508
6 Stem A182 F6 L finished 14.1/2" 368
7 Yoke nut B 148-952 L semifinished 14.3/4" 375
8 Backseat facing Stellite R 9.5/16" 236
9 Packing Graphite S 8.11/16" 221
15.1 Gland flange A217 WC9 T open 19.3/16" 487
16 Gland stud A193 B7 T closed 18.5/8" 473
22 Roller bearing Standard Weight lb 265 kg 120
23 Handwheel Carbon Steel
24 Nut A194 2H
28 Hardfaced backseat Stellite

16 BONETTI
BONETTI CMI Gate Valves - parallel slide - bolted bonnet
ASME Class 600
Sizes 1.1/2" to 4" (DN 40 to 100)
Buttwelding or Flanged Ends
Material Codes currently manufactured are: CB, C6.
Fig. 131.1
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 131)
- Flanged Ends RF ASME B16.5 (Fig. 131.1).
23
7 The relevant Ratings for each Material Code are shown on
21 page 30, for ASME Class 600.
22
17 Notes:
6
15.1 2 These valves have split parallel disk and intermediate disk spring.
24 3 Dimensions expressed in millimeters, but converted from
15 original Standard in inches, are rounded.
16
9 4 Exceptionally and compatibly with our moulds and die equip-
8 ment, some components usually of cast steel can be made
24 10.1 of corresponding forged steel.
5 Body-Bonnet sealability can be obtained by means of the
2 Gasket (10.1) or the Ring Joint (10.2).
4 7 Body Lenght L1 is according to ASME B16.10 - Regular
Pattern.
10.2 5.1 8 On request flanges finishing can be other than RF.
11 3 12 The Weight listed in the table is not binding.
1
Fig.131 Fig.131.1

SIZE DIMENSIONS BW ENDS RF FLANGED ENDS

B C V L1 Weight D E F Holes ∅ Circle L1 Weight
mm inches mm mm mm mm kg mm mm mm No mm mm mm kg
40 1.1/2" 460 515 250 241,5 25 156 22,5 73 4 22 114 241,5 32
50 2" 505 565 250 292 41 165 25,5 92 8 19 127 292 51
65 2.1/2" 580 660 250 330 50 191 28,5 105 8 22 149 330 63
80 3" 680 770 300 355,5 62 210 32 127 8 22 168 355,5 80
100 4" 740 855 350 432 92 273 38 157 8 25 216 432 128

Item Component Material for Material Code

No Component CB C6
1 Body A216 WCB A217 WC6
2 Bonnet A216 WCB A217 WC6
3 Seat rings A 105 + Stellite A182 F11 + Stellite
4 Disk A216 WCB + Stellite A217 WC6 + Stellite
5.01 Disk Spring Alloy steel Inconel
6 Stem A182 F6 A182 F6
7 Yoke nut B1 48-952 B 148-952
8 Backseat facing Stellite Stellite
9 Packinq Graohite Graphite
10.1 Body-Bonnet gasket AISI 304 AISI 304
10.2 Body-Bonnet ring joint AISI 316 AISI 316
11 Body-Bonnet bolt A193 B7 A193 B7
15 Gland A 182 F304 A 182 F304
15.1 Gland flange A105 A105
16 Gland stud A193 B7 A193 B7
17 Column A105 A105
21 Stem stop A105 A105
22 Roller bearing Standard Standard
23 Handwheel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H

BONETTI 17
BONETTI CMI Gate Valves - parallel slide - pressure seal bonnet
ASME Class 600
Sizes 4" to 5" (DN 100 to 125)
Buttwelding or Flanged Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 132
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 132)
- Flanged Ends RF ASME B16.5 (Fig. 132.1).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 600.
23
Notes:
7 2 These valves have split parallel disk and intermediate disk
22 spring.
14 3 Dimensions expressed in millimeters, but converted from
6 original Standard in inches, are rounded.
2 4 Exceptionally and compatibly with our moulds and die equip-
21
8 ment, some components usually of cast steel can be made
17
of corresponding forged steel.
10 24 6 Body Lenght L is according to ASME B16.10 - Short Pattern.
7 Body Lenght L1 is according to ASME B16.10 - Regular
1 15.1
Pattern.
5.1 16 8 On request flanges finishing can be other than RF.
15 12 The Weight listed in the table is not binding.

9
3 Fig.132 Fig.132.1
4

SIZE DIMENSIONS BW ENDS RF FLANGED ENDS

B C V L1 Weight D E F Holes ∅ Circle L1 Weight
mm inches mm mm mm mm kg mm mm mm No mm mm mm kg
100 4" 620 725 350 305 77 273 38 157 8 25 216 432 113
125 5" 705 825 400 381 112 330 45 186 8 29 266 508 172

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A 105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91+ Stellite
4 Disk A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5.1 Disk Spring Alloy steel Inconel Inconel Inconel
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B 148-952 B1 48-952 B1 48-952 B1 48-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A182 F304 A182 F304 A182 F304 A182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
17 Column A105 A105 A105 A105
21 Stem stop A105 A105 A105 A105
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

18 BONETTI
BONETTI CMI Gate Valves - parallel slide - pressure seal bonnet
ASME Class 600
Sizes 6" to 24" (DN 150 to 600)
Buttwelding or Flanged Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 133
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 133)
- Flanged Ends RF ASME B16.5 (Fig. 133.1).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 600.
23 7
6 22 Notes:
2 These valves have split parallel disk and intermediate disk
21 24 spring.
15.1 16 3 Dimensions expressed in millimeters, but converted from
original Standard in inches, are rounded. .J
15 17 4 Exceptionally and compatibly with our moulds and die equip-
ment, some components usually of cast steel can be
9
made of corresponding forged steel.
19 6 Body Lenght L is according to ASME B16.10-Short Pattern.
24
20 7 Body Lenght L1 is according to ASME B16.10-Regular
13 Pattern.
12
14 8 On request flanges finishing can be other than RF.
10 12 The Weight listed in the table is not binding.
2
4
8 Fig.133 Fig.133.1
3
5.1
1

SIZE DIMENSIONS BW ENDS RF FLANGED ENDS

B C V L1 Weight D E F Holes ∅ Circle L1 Weight
mm inches mm mm mm mm kg mm mm mm No mm mm mm kg
150 6" 760 910 450 457 178 356 48 216 12 29 292 559 250
200 8" 995 1185 500 584 310 419 56 270 12 32 349 660 420
250 10" 1185 1430 600 711 535 508 64 324 16 35 432 787 715
300 12" 1305 1610 700 813 760 559 67 381 20 35 489 838 970
350 14" 1435 1710 800 889 1090 603 70 413 20 39 527 889 1340
400 16" 1570 1960 800 991 1370 686 76 470 20 42 603 991 1725
450 18" 1895 2310 1000 1092 1705 743 83 534 20 45 654 1092 2135
500 20" 2035 2510 1000 1194 2350 813 89 584 24 45 724 1194 2885
600 24" 2295 2965 1000 1397 3085 940 105 692 24 51 838 1397 3835

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Disk A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5.1 Disk Spring Alloy steel Inconel Inconel Inconel
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B1 48-952 B1 48-952 B1 48-952 B1 48-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packinq Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
12 Segmental ring AISI 420 AISI 420 AISI 420 AISI 420
13 Bonnet flange A105 A105 A105 A105
14 Bonnet stud Alloy Steel Alloy Steel Allov Steel Allov Steel
15 Gland A182 F304 A182 F304 A 182 F304 A 182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
17 Column A105 A105 A105 A105
19 Clamp A216 WCB A216 WCB A216 WCB A216 WCB
20 Clamp bolt A193 B7 A193 B7 A193 B7 A193 B7
21 Stem stop A105 A105 A105 A105
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

BONETTI 19
BONETTI CMI Gate Valves - parallel slide - pressure seal bonnet
ASME Class 900
Sizes 2" to 5" (DN 50 to 125)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 134
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 134).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 900.

23 Notes:
2 These valves have split parallel disk and intermediate disk
7 spring.
22 3 Dimensions expressed in millimeters, but converted from
14 original Standard in inches, are rounded.
6 4 Exceptionally and compatibly with our moulds and die equip-
2 ment, some components usually of cast steel can be made
21
8 of corresponding forged steel.
17
6 Body Lenght L is according to ASME B16.10-Short Pattern.
10 24 12 The Weight listed in the table is not binding.
1 15.1

5.1 16
15
9
3 Fig.134
4

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
50 2" 535 590 300 216 32
65 2.1/2" 550 610 350 254 51
80 3" 560 620 400 305 54
100 4" 620 725 450 356 86
125 5" 725 -845 500 432 140

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A1 82 F22 + Stellite A182 F91+ Stellite
4 Disk A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5.1 Disk Spring Alloy steel Inconel Inconel Inconel
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B 148-952 B1 48-952 B1 48-952 B1 48-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A182 F304 A182 F304 A182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
17 Column A105 A105 A105 A105
21 Stem stop A105 A105 A105 A105
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

20 BONETTI
BONETTI CMI Gate Valves - parallel slide - pressure seal bonnet
ASME Class 900
Sizes 6" to 24" (DN 150 to 600)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 135
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 135).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 900.

23 7 Notes:
6 22 2 These valves have split parallel disk and intermediate disk
spring.
21 24 3 Dimensions expressed in millimeters, but converted from
15.1 16 original Standard in inches, are rounded.
4 Exceptionally and compatibly with our moulds and die equip-
15 17 ment, some components usually of cast steel can be made
of corresponding forged steel.
9
9 Body Lenght L is according to ASME B16.10-Short Pattern
19 up to 16" (DN 400); for larger sizes, CMI standard.
24
20 12 The Weight listed in the table is not binding.
13
12
14
10
2
4
8 Fig.135
3
5.1
1

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
150 6" 810 965 500 508 220
200 8" 1010 1205 600 660 385
250 10" 1135 1395 700 787 705
300 12" 1305 1605 800 914 975
350 14" 1410 1740 800 991 1290
400 16" 1640 2010 1000 1092 1495
450 18" 1730 2145 1000 1194 1965
500 20" 1990 2430 1000 1219 2885
600 24" 2170 2725 1000 1549 4450

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Disk A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5.1 Disk Spring Alloy steel Inconel Inconel Inconel
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B 148-952 B1 48-952 B 148-952 B1 48-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
12 Segmental ring AISI 420 AISI 420 AISI 420 AISI 420
13 Bonnet flange A105 A105 A105 A105
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Allov Steel
15 Gland A182 F304 A182 F304 A 182 F304 A 182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
17 Column A105 A105 A105 A105
19 Clamp A216 WCB A216 WCB A216 WCB A216 WCB
20 Clamp bolt A193 B7 A193 B7 A193 B7 A193 B7
21 Stem stop A105 A105 A105 A105
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

BONETTI 21
BONETTI CMI Gate Valves - parallel slide - pressure seal bonnet
ASME Class 1500
Sizes 2" to 5" (DN 50 to 125)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 136
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 136).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 1500.

23 Notes:
2 These valves have split parallel disk and intermediate disk
7 spring.
22 3 Dimensions expressed in millimeters, but converted from
14 original Standard in inches, are rounded.
6 4 Exceptionally and compatibly with our moulds and die equip-
2 ment, some components usually of cast steel can be made
21
8 of corresponding forged steel.
17
6 Body Lenght L is according to ASME B16.10-Short Pattern.
10 24 12 The Weight listed in the table is not binding.
1 15.1

5.1 16
15
9
3 Fig.136
4

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
50 2" 465 525 250 216 36
65 2.1/2" 565 640 300 254 59
80 3" 565 640 350 305 64
100 4" 615 720 400 406 102
125 5" 680 800 500 483 170

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A 105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91+ Stellite
4 Disk A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5.1 Disk Spring Alloy steel Inconel Inconel Inconel
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B1 48-952 B1 48-952 B1 48-952 B1 48-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A182 F304 A182 F304 A182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
17 Column A105 A105 A105 A105
21 Stem stop A105 A105 A105 A105
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

22 BONETTI
BONETTI CMI Gate Valves - parallel slide - pressure seal bonnet
ASME Class 1500
Sizes 6" to 24" (DN 150 to 600)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 137
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 137).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 1500.

23 7 Notes:
6 22 2 These valves have split parallel disk and intermediate disk
spring.
21 24 3 Dimensions expressed in millimeters, but converted from
15.1 16 original Standard in inches, are rounded.
4 Exceptionally and compatibly with our moulds and die equip-
15 17 ment, some components usually of cast steel can be made
of corresponding forged steel.
9
11 Body Lenght L is according to ASME B16.10-Short Pattern
19 up to 20" (DN 500); for larger sizes, CMI standard.
24
20 12 The Weight listed in the table is not binding.
13
12
14
10
2
4
8 Fig.137
3
5.1
1

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
150 6" 770 920 600 559 260
200 8" 980 1165 700 711 455
250 10" 1150 1380 800 864 760
300 12" 1380 1655 800 991 1250
350 14" 1495 1795 800 1067 1660
400 16" 1690 2030 1000 1194 2080
450 18" 1795 2180 1000 1346 2780
500 20" 1890 2320 1000 1473 3755
600 24" 2785 3310 1000 1943 5980

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Disk A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5.1 Disk Spring Alloy steel Inconel Inconel Inconel
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B1 48-952 B1 48-952 B1 48-952 B1 48-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packina Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
12 Segmental ring AISI 420 AISI 420 AISI 420 AISI 420
13 Bonnet flange A105 A105 A105 A105
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Allov Steel
15 Gland A182 F304 A182 F304 A182 F304 A 182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
17 Column A105 A105 A105 A105
19 Clamp A216 WCB A216 WCB A216 WCB A216 WCB
20 Clamp bolt A193 B7 A193 B7 A193 B7 A193 B7
21 Stem stop A105 A105 A105 A105
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

BONETTI 23
BONETTI CMI Gate Valves - parallel slide - pressure seal bonnet
ASME Class 2500
Sizes 2" to 5" (DN 50 to 125)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 138
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 138).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 2500.

23 Notes:
2 These valves have split parallel disk and intermediate disk
7 spring.
22 3 Dimensions expressed in millimeters, but converted from
14 original Standard in inches, are rounded.
6 4 Exceptionally and compatibly with our moulds and die equip-
2 ment, some components usually of cast steel can be made
21
8 of corresponding forged steel.
17
6 Body Lenght L is according to ASME B16.10-Short Pattern.
10 24 12 The Weight listed in the table is not binding.
1 15.1

5.1 16
15
9
3 Fig.138
4

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
50 2" 485 545 400 279 48
65 2.1/2" 575 640 450 330 75
80 3" 575 645 500 368 83
100 4" 715 810 600 457 133
125 5" 800 915 600 533 230

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91+ Stellite
4 Disk A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5.1 Disk Spring Alloy Steel Inconel Inconel Inconel
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B 148-952 B1 48-952 B 148-952 B1 48-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Alloy Steel
15 Gland A 182 F304 A 182 F304 A182 F304 A182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
17 Column ' A105 A105 A105 A105
21 Stem stop A105 A105 A105 A105
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

24 BONETTI
BONETTI CMI Gate Valves - parallel slide - pressure seal bonnet
ASME Class 2500
Sizes 6" to 24" (DN 150 to 600)
Buttwelding Ends
Material Codes currently manufactured are: CB, C6, C9, C12A.
Fig. 139
Connections usually manufactured are:
- Buttwelding Ends BW ASME B16.25 (Fig. 139).

The relevant Ratings for each Material Code are shown on

page 30, for ASME Class 2500.

23 7 Notes:
6 22 2 These valves have split parallel disk and intermediate disk
spring.
21 24 3 Dimensions expressed in millimeters, but converted from
15.1 16 original Standard in inches, are rounded.
4 Exceptionally and compatibly with our moulds and die equip-
15 17 ment, some components usually of cast steel can be made
of corresponding forged steel.
9
11 Body Lenght L is according to ASME B16.10-Short Pattern
19 up to 18" (DN 450); for larger sizes, CMI standard.
24
20 12 The Weight listed in the table is not binding.
13
12
14
10
2
4
8 Fig.139
3
5.1
1

SIZE DIMENSIONS
B C V L Weight
mm inches mm mm mm mm kg
150 6" 855 980 700 610 390
200 8" 1015 1180 700 762 685
250 10" 1220 1425 800 914 1165
300 12" 1385 1620 1000 1041 1705
350 14" 1410 1660 1000 1118 2190
400 16" 1650 1950 1000 1245 3140
450 18" 1790 2120 1000 1397 3985
500 20" 1890 2255 1000 1575 5320
600 24" 2050 2420 1000 1676 6010

Item Component Material for Material Code

No Component CB C6 C9 C12A
1 Body A216 WCB A217 WC6 A217 WC9 A217 C12A
2 Bonnet A216 WCB A217 WC6 A217 WC9 A217 WC9
3 Seat rings A105 + Stellite A182 F11 + Stellite A182 F22 + Stellite A182 F91 + Stellite
4 Disk A216 WCB + Stellite A217 WC6 + Stellite A217 WC9 + Stellite A217 WC9 + Stellite
5.1 Disk Spring Alloy Steel Inconel Inconel Inconel
6 Stem A182 F6 A182 F6 A182 F6 Stainless Steel
7 Yoke nut B 148-952 B 148-952 B 148-952 B1 48-952
8 Backseat facing Stellite Stellite Stellite Stellite
9 Packing Graphite Graphite Graphite Graphite
10 Pressure seal gasket A182 F316 A182 F316 A182 F316 A182 F316
12 Segmental ring AISI 420 AISI 420 AISI 420 AISI 420
13 Bonnet flange A105 A105 A105 A105
14 Bonnet stud Alloy Steel Alloy Steel Alloy Steel Allov Steel
15 Gland A182 F304 A182 F304 A 182 F304 A 182 F304
15.1 Gland flange A105 A105 A105 A105
16 Gland stud A193 B7 A193 B7 A193 B7 A193 B7
17 Column A105 A105 A105 A105
19 Clamp A216 WCB A216 WCB A216 WCB A216 WCB
20 Clamp bolt A193 B7 A193 B7 A193 B7 A193 B7
21 Stem stop A105 A105 A105 A105
22 Roller bearing Standard Standard Standard Standard
23 Handwheel Carbon Steel Carbon Steel Carbon Steel Carbon Steel
24 Nut A194 2H A194 2H A194 2H A194 2H

BONETTI 25
MATERIALS

ASTM ASTM ASTM ASTM ASTM ASTM

ASTM ASTM ASTM ASTM ASTM Stellite ASTM ASTM ASTM
Material A479 A182 F B150 B166 A564T.630 A453
A216WCB A217WC6 A217WC) A351CF8M A217C12A Gr.6 A193B7 A1942H A182F6
T.410C.3 XM 19 C62300 N06600 Cond.H1075 Gr. 660

Chemical Analysis (Note 1)

Carbon % 0.35 max 0.10-0.20 0.15 max 0.08 max 0.08-0.12 1 0.13 max 0.38-0.48 0.06 max 0.40 max 0.15 max 0.15 max 0,07 0.08 max

Manganese % 0.60-105 0.30-0.80 0.30-0.60 2.00 max 0.30-0.60 1.00 max 0.75-1.00 4.0-6.0 0.5 max 1.0 max 1.00 max 1.0 max 2.00 max

Phosphorus % 0.04 max 0.04 max 0.04 max 0.04 max 0.02 max 0.04 max 0.04 max 0.04 max 0.04 max 0.04 max 0.04 max 0.040 max

Sulphur % 0.05 max 0.04 max 0.04 max 0.03 max 0.01 max 0.03 max 0.04 max 0.03 max 0.05 max 0.015 max 0.30 max 0.03 max 0.030 max

Silicon % 0.35 max 0.5-1.0 0.5 max 1.00 max 0.20-0.50 1.00 max 0.20-0.35 1.00 max 0.25 max 0.5 max 1.00 max 1.0 max 1.00 max

Chromium % 1.0-1.5 2.0-2.5 16.00-18.00 8.00-9.50 28 11.5-13.5 0.80-1.10 20.5-23.5 14.0-17.0 11.5-13.5 15.0-17.5 13.5-16.0

Nickel % 10.00-14.00 0.40 max 0.50 max 11.5-13.5 1.0 max 72 min+Co 0.50 max 3.0-5.0 24.0-27.0

Molybdenum % 0.44-0.65 0.87-1.13 2.00-3.00 0.85-1.05 0.15-0.25 1.5-3.0 1.2-2.0 1.0-1.5

Copper % 82.2 min 0.50 max 3.0-5.0

Aluminium % 8.5-10.0 0.35 max

Iron % 2.0-4.0 6.0-10.0

Cobalt % 66

Tungsten % 5

Titanium % 1.90-2.35

Columbium % 0.10-0.30

Mechanical features (Note 2) (Note 2) (Note 2)

psi 70000 70000 75000 75000 85000 130000 125000 100000 78000 155000 110000 145000 130000
Tensile Strength
MPa 485 485 515 515 585 900 860 690 542 1.069 760 1000 895

psi 36000 40000 45000 30000 60000 100000 105000 55000 32000 90000 85000 125000 85000
Yield Strength
MPa 250 275 310 205 415 690 720 380 221 620 585 862 585

Elongation on 2" %min 22 20 20 30 20 12 16 35 15 10 15 13 15

Notes for Materials Notes for Rating

(Those Notes apply also to Rating Tables on pag. 30) (Those Notes apply also to Rating Tables on pag. 30)

Chemical Analysis and Mechanical Features are given for 3 Ratings of Tables on page 30 are those indicated by ASME
Customer’s convenience only. Actual and binding values are the B 16.34 for Classes 600, 900, 1500, 2500, 4500 and extrapolated
ones prescribed by original Standard for Classes 1700 - 2700.

4 Due to a possible transformation of carbide into graphite, ASME

1 We utilise also steel with lower Carbon content (≤ 0,25%). B 16.34 does not recommend the use of Carbon steel valves
(CMI-BONETTI material Code “CB”) over 800 °F (425 °C) for
2 Mechanical features depend on heat treatment. extended periods.
Prescribed heat treatment permits us to obtain the most suitable
physical and chemical characteristics. 5 For A217 WC6 and A217 WC9 valves (CMI-BONETTI material
Code “C6” and “C9”), ASME B 16.34 recommends:
“Use normalised and tempered material only - Not to be used
over 1100 °F (595 °C)”.

6 At temperatures above 1000 °F (538 °C), material A351 CF8M

(CMI-BONETTI material Code CF8M), must be used only when
the Carbon content is 0.04% or higher.

7 As BONETTI CMI valves are oversized versus International

Standard prescription, including ASME B16.34, effective maxi-
mum operating condition can be communicated on request.

26 BONETTI
BONETTI 27
 Fig. 107 Welding end detail for joint without backing ring Fig. 108 Welding end detail for joint without backing ring
for use on 0.88 in. (22 mm) and thinner nominal for use on nominal wall thickness greater than
wall thickness. 0.88 in. (22 mm).

Fig. 109 Welding end detail for joint using continuous Fig. 110 Welding end detail for joint using continuous
rectangular backing ring. tapered backing ring.

Notes Legenda
1 Dotted lines denote maximum envelope for transition A = Nominal outside diameter of component at welding
from welding bevel and root face into body of compo- end, for cast steel valve.
nent. B = Inside diameter at welding end.
C = Inside diameter at welding end, using backing ring.
2 Contour within the envelope is manufacturer's option t = Nominal wall thickness of the pipe.
unless otherwise specifically ordered.

3 See ASME B16.25 Section 5 for tolerances other than

those given in these figures.

4 Intersections should be slightly rounded.

5 Linear dimensions are in inches with metric values

shown in millimeters in parenthesis.

6 All dimensions given in these two pages 28 and 29 are

for customer's convenience only. Actual and binding
values are the ones prescribed by original Standard.

28 BONETTI
Dimension of Welding ends
1 2 4 5 6 7 4 5 6 7
Nominal Pipe English Units Metrical Units
Pipe Size Schedule No. A B C t A B C t
40 2.469 2.479 0.203 63 62,95 5,15
80 2.323 2.351 0.276 59 59,70 7,00
2.1/2 2.96 75
160 2.125 2.178 0.375 54 55,30 9,55
XXS 1.771 1.868 0.552 45 47,45 14,00

40 3.068 3.081 0.216 78 78,25 5,50

80 2.900 2.934 0.300 74 74,50 7,60
3 3.59 91
160 2.624 2.692 0.438 67 68,40 11,15
XXS 2.300 2.409 0.600 58 61.20 15,.25

40 3.548 3.564 0.226 90 90,55 5,75

3.1/2 4.12 105
80 3.364 3.402 0.318 85 86,40 8,10

4.026 4.044 0.237 102 102,70 6,00

40 80
3.826 3.869 0.337 97 98,25 8,55
120
4 4.62 3.624 3.692 0.438 117 92 93,80 11,15
160
3.438 3.530 0.531 87 89,65 13,50
XXS
3.152 3.279 0.674 80 83,30 17,.10

40 5.047 5.070 0.258 128 128,80 6,55

80 4.813 4.866 0.375 122 123,60 9,55
5 120 5.69 4.563 4.647 0.500 144 116 118,05 12,70
160 4.313 4.428 0.625 110 112,45 15,90
XXS 4.063 4.209 0.750 103 106,90 19,.05

40 6.065 6.094 0.280 154 154,80 7,10

80 5.761 5.828 0.432 146 148,05 10,95
6 120 6.78 5.501 5.600 0.562 172 140 142,25 14,25
160 5.187 5.326 0.719 132 135,30 18,25
XXS 4.897 5072 0.864 124 128,85 21,.95

40 7.981 8.020 0.322 203 203,70 8,20

60 7.813 7.873 0.406 198 199,95 10,30
80 7.625 7.709 0.500 194 195,80 12,70
100 7.437 7.544 0.594 189 191,60 15,10
8 8.78 223
120 7.187 7.326 0.719 183 186,10 18,25
140 7.001 7.163 0.812 178 181,95 20,60
XXS 6.875 7.053 0.875 175 179,15 22,25
160 6.813 6.998 0.906 173 177,75 23,00

40 10.020 10.070 0.365 255 255,80 9,25

60 9.750 9.834 0.500 248 249,80 12,70
80 9.562 9.670 0.594 243 245,60 15,10
10 100 10.94 9.312 9.451 0.719 278 237 240,05 18,25
120 9.062 9.232 0.844 230 234,50 21,45
140 8.750 8.959 1.000 222 227,55 25,40
160 8.500 8740 1.125 216 222,00 28,60

STD 12.000 12.053 0.375 305 306,15 9,55

40 11.938 11.999 0.406 303 304,75 10,30
XS 11.750 11.834 0.500 298 300,60 12,70
60 11.626 11.725 0.562 295 297,80 14,25
12 80 0,567361 11.374 11.505 0.688 329 289 292,25 17,50
100 11.062 11.232 0.844 281 285,30 21,45
120 10.750 10.959 1.000 273 278,35 25,40
140 10.500 10.740 1.125 267 272,80 28,60
160 10.126 10.413 1.312 257 264,50 33,30
STD 12.250 13.303 0.375 337 337,90 9,55
40 13.124 13.192 0.438 333 335,10 11,15
XS 13.000 13.084 0.500 330 332,35 12,70
60 12.812 12.920 0.594 325 328,15 15,10
14 80 14.25 12.500 12.646 0.750 362 318 321,20 19,05
100 12.124 12.318 0.938 308 312,90 23,85
120 11.812 12.044 1.094 300 305,90 27,80
140 11.500 11.771 1.250 292 299,00 31,75
160 11.188 11.498 1.406 284 292,05 35,70
STD 15.250 15.303 0.375 387 388,70 9,55
40 15.000 15.084 0.500 381 383,15 12,70
60 14.688 14.811 0.656 373 376,20 16,65
80 14.312 14.482 0.844 364 367,85 21,45
16 16.25 413
100 13.938 14.155 1.031 354 359,55 26,20
120 13.562 13.826 1.219 344 351,20 30,95
140 13.124 13.442 1.438 333 341,45 36,55
160 12.812 13.170 1.594 325 334,50 40,50
STD 17.250 17.303 0.375 438 439,50 9,55
XS 17.000 17.084 0.500 432 433,95 12,70
40 16.876 16.975 0.562 429 431,15 14,25
60 16.500 16.646 0.750 419 422,80 19,05
18 80 18.28 16.124 16.318 0.938 464 410 414,50 23,85
100 15.688 15.936 1.156 398 404,75 29,35
120 15.250 15.553 1.375 387 395,05 34,95
140 14.876 15.225 1.562 378 386,70 39,65
160 14.438 14.842 1.781 367 377,00 45,25
STD 19.250 19.303 0.375 489 490,30 9,55
XS 19.000 19.084 0.500 483 484,75 12,70
40 18.812 18.920 0.594 478 480,55 15,10
60 18.376 18.538 0.812 467 470,85 20,60
20 80 20.31 17.938 18.155 1.031 516 456 461,15 26,20
100 17.438 17.717 1.281 443 450,00 32,55
120 17.000 17.334 1.500 432 440,30 38,10
140 16.500 16.896 1.750 419 429,15 44,45
160 16.062 16.513 1.969 408 419.45 50,00
STD 21.250 21.303 0.375 540 541,10 9,55
XS 21.000 21.084 0.500 533 535,55 12,70
60 20.250 20.428 0.875 514 518,85 22,25
80 19.750 19.990 1.125 502 507,75 28,60
22 22.34 567
100 19.250 19.553 1.375 489 496,65 34,95
120 18.750 19.115 1.625 476 485,50 41,30
140 18.250 18.678 1.875 464 474,40 47,65
160 17.750 18240 2.125 451 463,30 54,00

STD 23.250 23.303 0.375 591 591,90 9,55

XS 23.000 23.084 0.500 584 586,35 12,70
30 22.876 22.975 0.562 581 583,55 14,25
40 22.624 22.755 0.688 575 578,00 17,50
60 22.062 22.263 0.969 560 565,50 24,60
24 24.38 619
80 21.562 21.826 1.219 548 554,40 30,95
100 20.938 21.280 1.531 532 540,50 38,90
120 20.376 20.788 1.812 518 528,00 46,00
140 19.876 20.350 2.062 505 516,90 52,35
160 19.312 19.857 2.344 491 504,35 59,55

BONETTI 29
RATING (See Notes on page 26)
Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar) Max Operating Pressure (bar)
Operating ASME Class 600 ASME Class 900 ASME Class 1500 ASME Class 2500 ASME Class 4500
Temperature
°C Material Code Material Code Material Code Material Code Material Code
CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A
-29 +38 102,1 103,4 103,4 99,3 153,2 155,1 155,1 148,9 155,1 255,3 258,6 258,6 248,2 258,6 425,5 430,9 430,9 413,7 430,9 765,9 775,7 775,7 744,6 775,7
50 102,1 103,4 103,4 99,3 103,4 150,4 155,1 155,1 144,3 155,1 250,6 258,6 258,6 240,6 258,6 417,7 430,9 430,9 400,9 430,9 751,9 775,7 775,7 721,7 775,7
100 100,2 103,4 103,4 96,2 103,4 139,8 154,4 154,6 126,6 154,6 233,0 257,4 257,6 211,0 257,6 388,3 429,0 429,4 351,6 429,4 699,0 772,2 773,0 632,9 773,0
150 93,2 103,0 103,0 84,4 103,0 135,2 149,2 150,6 115,5 150,6 225,4 248,7 250,8 192,5 250,8 375,6 414,5 418,2 320,8 418,2 676,1 746,2 752,8 577,4 752,8
200 90,2 99,5 100,3 77,0 100,3 131,4 143,9 145,8 107,0 145,8 219,0 239,8 243,4 178,3 243,4 365,0 399,6 405,4 297,2 405,4 657,0 719,4 729,8 534,9 729,8
250 87,6 95,9 97,2 71,3 97,2 125,8 139,0 139,0 100,1 139,0 209,7 231,8 231,8 166,9 231,8 349,5 386,2 386,2 278,1 386,2 629,1 694,8 694,8 500,6 694,8
300 83,9 92,7 92,7 66,8 92,7 119,5 128,6 128,6 94,9 128,6 199,1 214,4 214,4 158,1 214,4 331,8 357,1 357,1 263,5 357,1 597,3 642,6 642,6 474,3 642,6
350 79,6 85,7 85,7 63,2 85,7 116,1 124,0 124,0 92,7 124,0 193,6 206,6 206,6 154,4 206,6 322,6 344,3 344,3 257,4 344,3 580,7 619,6 619,6 463,3 619,6
Metrical Units

375 77,4 82,6 82,6 61,8 82,6 112,7 120,7 120,7 91,0 120,7 187,8 201,1 201,1 151,6 201,1 313,0 335,3 335,3 252,7 335,3 563,5 603,3 603,3 454,9 603,3
400 75,1 80,4 80,4 60,7 80,4 109,1 116,5 116,5 89,6 116,5 181,8 194,1 194,1 149,4 194,1 303,1 323,2 323,2 249,0 323,2 545,5 581,8 581,8 448,2 581,8
425 72,7 77,6 77,6 59,8 77,6 104,2 109,8 109,8 88,3 109,8 173,6 183,1 183,1 147,2 183,1 289,3 304,9 304,9 245,3 304,9 520,8 548,5 548,5 441,6 548,5
450 69,4 73,3 73,3 58,9 73,3 86,3 105,1 105,1 87,4 105,1 143,8 175,1 175,1 145,7 175,1 239,7 291,6 291,6 242,9 291,6 431,5 524,7 524,7 437,1 524,7
475 57,5 70,0 70,0 58,3 70,0 69,0 101,4 101,4 86,5 101,4 115,0 169,0 169,0 144,2 169,0 191,7 281,8 281,8 240,4 281,8 345,1 507,0 507,0 432,7 507,0
500 46,0 67,7 67,7 57,7 67,7 52,3 95,1 95,1 86,0 95,1 87,2 158,2 158,2 143,4 158,2 145,3 263,9 263,9 238,9 263,9 261,5 474,8 474,8 430,1 474,8
525 34,9 63,4 63,4 57,3 63,4 35,3 77,2 84,7 84,7 84,7 58,8 128,6 140,9 140,9 140,9 97,9 214,4 235,0 235,0 235,0 176,3 385,9 423,0 423,0 423,0
538 23,5 51,5 56,5 56,5 56,5 17,7 44,7 55,3 75,2 75,2 29,5 74,5 92,2 125,5 125,5 49,2 124,1 153,7 208,9 208,9 88,6 223,4 276,6 375,8 375,8
550 11,8 29,8 36,9 50,0 50,0 38,1 46,9 74,8 74,8 63,5 78,2 124,9 124,9 105,9 130,3 208,0 208,0 190,6 234,5 374,2 374,2
575 25,4 31,3 49,8 49,8 26,4 31,6 71,8 71,8 44,0 52,6 119,7 119,7 73,4 87,7 199,5 199,5 132,0 157,9 359,1 359,1
600 17,6 21,1 47,9 47,9 18,3 20,7 59,7 58,5 30,5 34,4 99,5 97,5 50,9 57,4 165,9 162,5 91,6 103,3 298,6 292,5
625 12,2 13,8 39,8 39,0 12,8 13,4 47,4 43,8 21,3 22,3 79,1 73,0 35,5 37,2 131,8 121,6 63,9 66,9 237,2 219,1
650 8,5 8,9 31,6 29,2 8,5 8,5 38,0 29,8 14,2 14,2 63,3 49,6 23,6 23,6 105,5 82,7 42,6 42,6 189,9 148,9
675 5,7 5,7 25,3 19,9 31,0 51,6 86,0 154,8
700 20,6 25,1 41,9 69,8 125,7
725 16,8 21,0 34,9 58,2 104,8
750 14,0 17,6 29,3 48,9 87,9
775 11,7 13,7 22,8 38,0 68,4
800 9,0 10,5 17,4 29,2 52,6
816 7,0 8,6 14,1 23,8 42,7

Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6

Hydrostatic Testing Pressure (bar)

Shell 153,2 155,1 155,1 149,0 155,1 229,8 232,7 232,7 223,4 232,7 383,0 387,9 387,9 372,3 387,9 638,3 646,4 646,4 620,6 646,4 1148,9 1163,6 1163,6 1116,9 1163,6
Seat 112,3 113,7 113,7 109,2 113,7 168,5 170,6 170,6 163,8 170,6 280,8 284,5 284,5 273,0 284,5 468,1 474,0 474,0 455,1 474,0 842,5 853,3 853,3 819,1 853,3

RATING (See Notes on page 26)

Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi) Max Operating Pressure (psi)
Operating ASME Class 600 ASME Class 900 ASME Class 1500 ASME Class 2500 ASME Class 4500
Temperature
°F Material Code Material Code Material Code Material Code Material Code

CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A CB C6 C9 CF8M C12A

-20 +100 1480 1500 1500 1440 1500 2220 2250 2250 2160 2250 3705 3750 3750 3600 3750 6170 6250 6250 6000 6250 11110 11250 11250 10800 11250

200 1360 1500 1500 1240 1500 2035 2250 2250 1860 2250 3395 3750 3750 3095 3750 5655 6250 6250 5160 6250 10185 11250 11250 9290 11250

300 1310 1445 1455 1120 1455 1965 2165 2185 1680 2185 3270 3610 3640 2795 3640 5450 6015 6070 4660 6070 9815 10830 10925 8390 10925

400 1265 1385 1410 1025 1410 1900 2080 2115 1540 2115 3170 3465 3530 2570 3530 5280 5775 5880 4280 5880 9505 10400 10585 7705 10585

500 1205 1330 1330 955 1330 1810 1995 1995 1435 1995 3015 3325 3325 2390 3325 5025 5540 5540 3980 5540 9040 9965 9965 7165 9965

600 1135 1210 1210 900 1210 1705 1815 1815 1355 1815 2840 3025 3025 2255 3025 4730 5040 5040 3760 5040 8515 9070 9070 6770 9070

650 1100 1175 1175 890 1175 1650 1765 1765 1330 1765 2745 2940 2940 2220 2940 4575 4905 4905 3700 4905 8240 8825 8825 6660 8825
English Units

700 1060 1135 1135 870 1135 1590 1705 1705 1305 1705 2665 2840 2840 2170 2840 4425 4730 4730 3620 4730 7960 8515 8515 6515 8515

750 1015 1065 1065 855 1065 1520 1595 1595 1280 1595 2535 2660 2660 2135 2660 4230 4430 4430 3560 4430 7610 7970 7970 6410 7970

800 825 1015 1015 845 1015 1235 1525 1525 1265 1525 2055 2540 2540 2110 2540 3430 4230 4230 3520 4230 6170 7610 7610 6335 7610

850 640 975 975 835 975 955 1460 1460 1255 1460 1595 2435 2435 2090 2435 2655 4060 4060 3480 4060 4785 7305 7305 6265 7305

900 460 900 900 830 900 690 1350 1350 1245 1350 1150 2245 2245 2075 2245 1915 3745 3745 3460 3745 3455 6740 6740 6230 6740

950 275 640 755 775 775 410 955 1160 1160 1160 685 1595 1930 1930 1930 1145 2655 3220 3220 3220 2055 4785 5795 5795 5795

1000 170 430 535 700 725 255 650 800 1050 1090 430 1080 1335 1750 1820 715 1800 2230 2915 3030 1285 3240 4010 5245 5450

1050 290 350 685 720 430 525 1030 1080 720 875 1720 1800 1200 1455 2865 3000 2160 2625 5155 5400

1100 190 220 610 605 290 330 915 905 480 550 1525 1510 800 915 2545 2515 1440 1645 4575 4525

1150 130 135 475 445 195 205 710 670 325 345 1185 1115 545 570 1970 1855 975 1030 3550 3345

1200 80 80 370 290 125 125 555 430 205 205 925 720 345 345 1545 1200 615 615 2775 2160

1250 295 440 735 1230 2210

1300 235 350 585 970 1750

1350 190 290 480 800 1440

1400 150 225 380 630 1130

1450 115 175 290 485 875

1500 85 125 205 345 620

Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6 Note 4 Note 5 Note 5 Note 6

Hydrostatic Testing Pressure (psig)

Shell 2220 2250 2250 2160 2250 3330 3375 3375 3240 3375 5557,5 5625 5625 5400 5625 9255 9375 9375 9000 9375 16665 16875 16875 16200 16875

Seat 1628 1650 1650 1584 1650 2442 2475 2475 2376 2475 4075,5 4125 4125 3960 4125 6787 6875 6875 6600 6875 12221 12375 12375 11880 12375

30 BONETTI
CNC Machining Center for valves up to size 36” Gates 12” ASME Class 1500

CNC Machining Center for valves up to size 18” Gates 8” ASME Class 4500

Gate 14” ASME Class 1500

Gate 14” ASME Class 2500 in ASTM A217 C12A material

Gate 28” ASME Class 900

BONETTI CMI valves assembling department under Hydrostatic pressure test

BONETTI 31
 CESARE BONETTI S.p.A. Uff. vendite: Tel: +39 02 99072 333 Fax: +39 02 99072 300
20024 Garbagnate Milanese (Italy) E-mail: [email protected]
Via Cesare Bonetti 17 Export sales: Tel: +39 02 99072 444 Fax: +39 02 99 072 400
Internet web site: http://www.cesare-bonetti.it E-mail: [email protected]

BONETTI Armaturen GmbH & Co. KG Sales office: Tel: +49 06431 598310 Fax: +49 06431 598329
D-65549 Limburg an der Lahn (Germany) E-mail: [email protected]
In den Fritzenstücker, 4 Internet web site: http://www.bonetti.de

BONETTI (Suzhou) Level Gauges & Valves Co., Ltd. Sales office: Tel: +86-512-6281 6396 Fax: +86-512-6281 6393
No 8, Lane 1, Wupu Road, Shengpu District, E-mail: [email protected]
Suzhou Industrial Park, Jiangsu, China 215126 Internet web site: http://www.cesare-bonetti-cn

BONETTI WAAREE India Pvt., Ltd. Sales office: Tel: +86-512-6281 6396 Fax: +86-512-6281 6393
137, Damji Shamji Ind Complex,Off Mahakali Caves Rd, E-mail: [email protected]
Andheri (E), Mumbai 400 093 - India Internet web site: http://www.waaree.com

© This catalogue is exclusive property of Cesare Bonetti S.p.A. Any unauthorized reproduction, in total or in part, of this catalogue shall be prosecuted.
Products and data sheets on this catalogue reflect current standard production.
Cesare Bonetti S.p.A. reserves the right to carry out necessary amendments to products and materials.
Amendments or modifications to drawings and materials can be done also to comply with particular Customer's request or technical specifications.

Pubblicazione B06-19 - Eng