AC and DC

Gearmotors
Any product is only as good as its individual components.
Starting with careful attention to detail in the engineering stage
Other Gear Solutions
and continuing through the selection from Baldor
of materials and manufacturing
processes, each component is Worm Gear Reducers
designed to stand up in rugged
industrial applications.

Die cast housings are produced

in our own facility. Machined on

precision CNC machining centers

and checked on state-of -the- Stainless Steel
art measuring equipment, these Worm Gear
housing provide rigid support and Reducers
accurate alignment of the gears.

All motors are ball bearing

type, rated for industrial Helical Worm
duty. These motors, both
AC and DC, are constructed
from precision machined
components and are
In-Line Helical
dynamically balanced for Gear Units
smooth quiet operation.

Outside surfaces are

protected by a durable heat Ratio
cured dry powder coating Multipliers
which is FDA approved for
food processing applications.

Continuing education and Gearmotors

training helps our people
maintain the highest standards
of quality. From initial design
through final test, our employees
are dedicated to building the
best product possible.

Over 300 stock ratings are

available from Baldor district Inverter Duty
offices and distributors across Gearmotors
the country. Thousands of
custom combinations can be
assembled from a wide range
of standard ratios, motors,
and mountings. Baldor sales
and engineering personnel are
available to help solve your
application problems.
www.baldor.com
 RIGHT ANGLE GEARMOTORS FEATURES AND BENEFITS
Ball bearings for greater load
Dynamically balanced
Custom designed seals capacity (J and K Styles)
armature/rotor for vibration
with a bi-directional helix
free smooth operation
for positive oil retention
Induction hardened and ground
and long life
worm significantly increases both
Heavy duty industrial the operating life and load capacity
ball bearings are
employed on all
Baldor gearmotors Internal expansion bladder
eliminates the need for a
breather while allowing the
gearmotor to be mounted in
any position.* This feature is
exclusive to Baldor.

Model JK
UL recognized insulation
shown
system 200˚ ISR copper
magnetic wire

Synthetic oil provides improved efficiencies,

New castings are designed
long life and cooler operation. Permanently
to eliminate any possibility of
lubricated for long mainetnance-free operation.
porosity leaks, reduce weight and
increase strength and reliability
* Vertical motor below gearhead not recommended.

www.baldor.com 1
 SINGLE REDUCTION WORM GEARMOTORS
• Hardened and ground steel worm provides quiet operation and long life
• Factory lubricated for life, no routine maintenance is required
• Double 5/16” output shafts provides mounting flexibility
• AC & DC ratings up to 1/20 hp
• Torque ratings to 15 in-lbs
Style FTA • Available in 90 volts DC & 115 volts AC

• Hardened and ground steel worm provides quiet operation and long life
• Factory lubricated for life with Mobil SHC 634 synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Double 1/2” output shafts provides mounting flexibility
• AC & DC ratings up to 1/6 hp
• Torque ratings to 45 in-lbs
Style B
• Available in DC voltages 90 or 180 and AC voltages 115 or 230/460

• Hardened and ground steel worm provides quiet operation and long life
• Factory lubricated for life with Mobil SHC 634 synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Double 1/2” output shafts provides mounting flexibility
• AC & DC ratings up to 1/4 hp
• Torque ratings to 75 in-lbs
• Available in DC voltages 90 or 180 and AC voltages 115 or 230/460
Style C

• Hardened and ground steel worm provides quiet operation and long life
• Factory lubricated for life with Mobil SHC 634 synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Single 5/8” output shaft has both keyway and flat
• AC & DC ratings up to 1/2 hp
• Torque ratings to 320 in-lbs
• Available in DC voltages 90 or 180 and AC voltages 115 or 230/460

Style K

• Hardened and ground steel worm provides quiet operation and long life
• Factory lubricated for life with Mobil SHC 634 synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Double 3/4” output shafts provides mounting flexibility
• AC & DC ratings up to 1/2 hp
• Torque ratings to 550 in-lbs
• Available in DC voltages 90 or 180 and AC voltages 115 or 230/460
Style J
NOTE: Vertical motor below gearhead not recommended. Avoiding those positions where the high speed oil seal is immersed in oil, will provide greater security against
high speed input seal wear.
2 www.baldor.com
 • Hardened and ground steel worm provides quiet operation and long life
• Ratios sfrom 5:1 to 60:1
• Factory lubricated for life with Klubersynth UH1-6-460 USDA food
grade oil
• Baldor’s exclusive internal oil expansion bladder, keeps oil in and
contamination out
• Symmetrical, 1.00" hollow through-bore design
• AC & DC ratings up to 1 hp
• Torque ratings to 550 in-lbs
Style H

DOUBLE REDUCTION WORM GEARMOTORS

• Hardened and ground steel worms provides quiet operation and long life
• Ratios from 88:1 to 1600:1
• Double 5/16” output shafts provides mounting flexibility
• AC & DC ratings up to 1/50 hp
• Torque ratings to 15 in-lbs
• Available in DC voltages 90 or 180 and AC voltages 115 or 230/460
Style GNA

• Hardened and ground steel worms provides quiet operation and long life
• Ratios from 27.4:1 to 2500:1
• Factory lubricated for life with Mobil SHC 634 synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Double 1/2” output shafts provides mounting flexibility
• AC & DC ratings up to 1/20 hp
• Torque ratings to 75 in-lbs
• Available in DC voltages 90 or 180 and AC voltages 115 or 230/460
Style D

• Hardened and ground steel worms provides quiet operation and long life
• Ratios from 50:1 to 2000:1
• Factory lubricated for life with Mobil SHC 634 synthetic oil
• Baldor’s exclusive internal oil expansion bladder. Keeps lubrication in and
contamination out
• Double 5/8” output shafts provides mounting flexibility
• AC & DC ratings up to 1/4 hp
• Torque ratings to 175 in-lbs
• Available in DC voltages 90 or 180 and AC voltages 115 or 230/460

Style E

NOTE: Vertical motor below gearhead not recommended. Avoiding those positions where the high speed oil seal is immersed in oil, will provide greater security against high
speed input seal wear.

www.baldor.com 3
 PARALLEL SHAFT GEARMOTORS
Dynamically balanced
Heavy duty industrial armature/rotor for vibration Custom designed seals
ball bearings are free smooth operation with a bi-directional helix
employed on all for positive oil retention
Baldor gearmotors and long life

UL recognized insulation Model PSL

shown Extra wide
system 200˚ ISR copper Helical* gearing
magnetic wire (PSL and PSLH)
greatly improves
load capacity and
quiet operation
Heavy duty industrial ball
bearing on interim stages on
all parallel gearmotors All parallel shaft gearmotors
New castings are designed to
are permanently lubricated
eliminate any possibility of porosity
for life with synthetic
leaks, reduce weight and increase
lubrication for long
strength and reliability
maintenance-free operation.

4 www.baldor.com
 PARALLEL SHAFT GEARMOTORS
• Induction hardened helical and spur gears for extra strength
• Ball and needle bearing construction for improved torque capacity
• Factory lubricated for life with Mobil SHC 634 synthetic oil
• Output shaft is 1/2” diameter
• Industry standard mounting dimensions
• AC & DC ratings up to 1/4 hp
• Ratios from 5:1 to 3125:1
• Torque ratings to 144 in-lbs
• Available in DC voltages 90 or 180 and AC voltages 115 or 230/460
Style PSSH • Additional bases for greater mounting flexibility available

• Induction hardened helical and spur gears for extra strength

• Ball and needle bearing construction for improved torque capacity
• Factory lubricated for life with synthetic Mobilith SHC 007
• Output shaft is 5/8” diameter
• Industry standard mounting dimensions
• AC & DC ratings up to 1/8 hp
• Ratios from 5:1 to 625:1
• Torque ratings to 235 in-lbs
• Available in DC voltages 90 or 180 and AC voltages 115 or 230/460
• Additional bases for greater mounting flexibility available
Style PSM

• Induction hardened helical gears for extra strength

• Ball and needle bearing construction for improved torque capacity
• Factory lubricated for life with synthetic Mobilith SHC 007
• Output shaft is 3/4” diameter
• Industry standard mounting dimensions
• AC & DC ratings up to 1/2 hp
• Ratios from 5:1 to 625:1
• Torque ratings to 637 in-lbs
• Available in DC voltages 90 or 180 and AC voltages 115 or 230/460
• Additional bases for greater mounting flexibility available

Style PSL

Style PSLH

NOTE: Vertical motor below gearhead not recommended. Avoiding those positions where the high speed oil seal is immersed in oil, will provide greater security against high
speed input seal wear.

www.baldor.com 5
 GEARMOTOR ACCESSORIES

BKP2400 Conduit Box

BKP2400 is an optional combination conduit/capacitor mounting kit. This box may
be use with stock 24 frame AC motors and Gearmotors.

2.950
2.930 .385
1.505 .365

1.000 8 x .281 HOLES, THRU

TYP
1.448
2.010 REF
1.990 4.775
3.98 4.745
1.448
2.000 REF
1.980
TYP

4 x .281
B92 Base 1.50 .473
1.50

B92 is a formed steel-mounting base that bolts to the bottom of the PSM gearbox
casting. Provides secure foot mounting and drop-in interchangeability with other
manufacturers.

4.104
3.375
3.000 .500
1.500
TYP. .672

1.218 .500 TYP.

3.375
4.465 3.000
3.250

1.688 .380
TYP.
3 x 1/4 - 20 THRU 4 x .281 THRU

B93 Adapter B93 is a three point face mounting adapter. Provides Interchangeability with other
manufactures. Baldor also can provide a PSM with the three point mount integral to
the gearhead casting. Contact your local Baldor sales office for additional information.

6 www.baldor.com
 GEARMOTOR ACCESSORIES

LB73
LB73GR
LB74

LB75

LB73 & LB73GR are “L” type mounting brackets used with the PSSH gearmotor. Securely mounts to gear face in a 90
degree locations for floor, wall or ceiling mount. LB73 is painted black to match stock DC motor while LB74GR is painted
gray to match our AC line.

LB74 “L” type mounting brackets used with the PSL and PSLH gearmotor. Securely mounts to gear face in a 90 degree
locations for floor, wall or ceiling mount. LB74 is not recommended for units weighing over 20 lbs.

LB75 “L” type mounting brackets used with the PSL and PSLH gearmotor. Securely mounts to gear face in a 90 degree
locations for floor, wall or ceiling mount. LB75 is recommended for units weighing over 20 lbs.

A B C D E F H BA W X Y
LB73 3.75 4.50 3.94 3.03 3.75 1.88 2.25 1.50 3.40 2.65 0.93
LB74 4.50 6.00 5.45 4.00 5.00 2.50 3.10 1.50 4.63 3.62 1.28
LB75 6.00 6.00 6.00 4.00 5.00 2.50 3.10 1.50 6.00 3.62 1.28

www.baldor.com 7
 NEMA Enclosed DC Controls
FOR PERMANENT MAGNET OR SHUNT WOUND MOTORS

Features common to enclosed and chassis mount controls:

• Full wave SCR control with free wheeling diode (NEMA type K) except regen controls.
• Field power supply allows use with shunt wound DC motors as well as permanent magnet motors.
• Adjustable accel, decel, current limit, IR comp, min. and max. speed. Current limit indicating LED.
• 5K speed pot for speed control (remote on chassis mount).
• Kit available for forward/brake/reverse switching (BC140, BC154, BC254 only).
• Horsepower resistor and armature fuse selectable to match control and motor for each application.
(Included in price of control).
• Customer selectable armature or tach feedback (except BC138, BC139, BC140, BC140-FBR).
• Anti-demag circuit protects PM motors and helps protect the SCR power bridge against direct shorts.
BC140 Enclosed • Noise rejection circuit eliminates false starts and blown SCR’s.
(NEMA 1)
• US and Canadian UL component recognition.

Additional features are standard only on enclosed control:

• On-off switch • 115/230 voltage selection switch or jumper
• Pilot light (BC140, BC140-FBR, BC200, BC201, BC202, BC203, BC204, BC254 and BC354 only)
• Terminal strip connections • Built in armature and line fusing
• BC140-FBR includes Forward-Brake-Reverse switch

A Plug-in Horsepower Resistor® and armature fuse must be ordered and installed in BC138, BC139, BC140, BC140-FBR, BC141 and
BC142. Spare resistor kits are also available. Resistor should be selected based on the motor’s rated current.

Approximate
Hp Catalog Shipping Weight Input
Range Number (Lbs) Voltage
1/100-1/3 BC138 1 115 VAC
1/50-3/4 BC139 1 230 VAC
1/100-2* BC140 3 115/230 VAC
1/100-2* BC140-FBR 3 115/230 VAC
NOTE: *1 Hp at 115V and 2 Hp at 230V requires BC143 heatsink kit.
FBR = Forward/Brake/Reverse.

DC Control Accessories
Approximate
Catalog Shipping Weight
Number Description (Lbs)
BC24-LF Ac Line Filter for use with CE Applications 0.5
BC143 External Heatsink Kit (BC140, BC140-FBR, BC141, BC142) 2.0
BC144 Forward-Brake-Reverse Switch Kit for BC140 0.4
BC145 Signal Isolator Board 0.5
BC146 Current Sensing Relay/Overload Protector 0.4
BC147 Barrier Terminal Board (BC141 & BC142) 0.3
BC148 Replacement Potentiometer Kit (5K ohm) 0.1
BC149 Knob and Dial Kit 0.1
BC151 Electronic Speed Potentiometer 0.5
BC152 Barrier Terminal Board With Signal Isolator (BC141 AND BC142) 1.0
BC218 DIN-rail mounting kit for BC141, BC142 or BC204 0.5
NOTE: BC24-LF is an AC line filter required for applications where CE is required if the control is not filtered elsewhere in the application.
This filter is used on most 115 or 230 VAC, single phase applications where CE is required.

8 www.baldor.com
 Chassis Mount DC Controls

BC141 / BC142 BC155

Approximate Input
Hp Catalog Shipping Weight Voltage
Range Number (Lbs) (1Ph,50/60 Hz)
1/100-1.5** BC141 1 115 VAC
1/50-3** BC142 2 230 VAC
5 BC155 5 230 VAC
NOTE: Above controls include 5k speed potentiometer.
**1-1.5 Hp at 115 Volts and 2-3 Hp at 230 Volts, requires BC143 Heatsink kit. BC155 Includes integral heatsink.

Plug-In Horsepower Resistor & Fuse Kit

A Plug-in Horsepower Resistor® and armature fuse must be ordered and installed in BC138, BC139, BC140, BC140-FBR, BC141 and
BC142. These should be selected based on the motor’s rated current.

Motor Hp Plug-In Hp
Armature Resistor Baldor Approximate DC Fuse
Voltage Resistance Catalog Motor Current Rating
90-130 VDC 180 VDC Value (Ohms) Number (DC Amps) (AC Amps)
1/100 1/50 1.00 BR1000 0.20 0.50
1/50 1/25 0.51 BR0510 0.30 0.50
1/30 1/15 0.35 BR0350 0.33 0.50
1/20 1/10 0.25 BR0250 0.50 0.75
1/15 1/8 0.25 BR0251 0.80 1.00
1/12 1/6 0.18 BR0180 0.85 1.25
1/8 1/4 0.10 BR0100 1.30 2.00
1/6 1/3 0.10 BR0101 2.00 2.50
1/4 1/2 0.05 BR0050 2.50 4.00
1/3 3/4 0.035 BR0035 3.30 5.00
1/2 1 0.025 BR0025 5.00 8.00
3/4 1 1/2 0.015 BR0015 7.50 12.00
1* 2* 0.01 BR0010 10.00 15.00
1 1/2* 3* 0.006 BR0006 15.00 25.00**
NOTE: * External Heatsink required. ** Also used with AC Line Fuse. For AC line fuse rating see manual.

Fractional Horsepower DC Speed Controls

FOR PERMANENT MAGNET MOTORS

• Variable Transformer for Manual Speed Adjustment • On/Off Switch

• Heavy Duty Silicon Full Wave Rectifier • Totally-Enclosed Cabinet (NEMA 1)
• Built-In Circuit Breaker • Supplied w/Type SJO Oil Resistant Cord, 7 Feet Long
• Center Lock Reversing Switch (Center Off) • Input Voltage 115VAC 1φ; Output Voltage 0-90 VDC
• Pilot Light • CSA Listed File # LR54532

Maximum Catalog Approximate Amp Input

Hp Number Shipping Weight (Lbs) Capacity Voltage
1/15 BC110 5 1.0 115 VAC
1/8 BC115 6 1.5 115 VAC
1/4 BC130 10 3.0 115 VAC

www.baldor.com 9
 Contact your nearest Baldor District Office at these
World Wide locations, or visit www.baldor.com
UNITED STATES IOWA NORTH CAROLINA DALLAS AUSTRALIA JAPAN
DES MOINES GREENSBORO 3040 QUEBEC UNIT 3, 6 STANTON ROAD DIA BLDG 802,
ARIZONA 1800 DIXON STREET, SUITE C 1220 ROTHERWOOD ROAD DALLAS, TX 75247 SEVEN HILLS, NSW 2147, 2-21-1 TSURUYA-CHO,
PHOENIX DES MOINES, IA 50316 GREENSBORO, NC 27406 PHONE: 214-634-7271 AUSTRALIA KANAGAWA-KU
4211 S 43RD PLACE PHONE: 515-263-6929 P O BOX 16500 FAX: 214-634-8874 PHONE: (61) (2) 9674 5455 YOKOHAMA, 221-0835,
PHOENIX, AZ 85040 FAX: 515-263-6515 GREENSBORO, NC 27416 FAX: (61) (2) 9674 2495 JAPAN
PHONE: 602-470-0407 PHONE: 336-272-6104 UTAH PHONE: 81-45-412-4506
FAX: 602-470-0464 MARYLAND FAX: 336-273-6628 SALT LAKE CITY UNIT 8, 5 KELLETTS ROAD FAX: 81-45-412-4507
BALTIMORE 2230 SOUTH MAIN STREET ROWVILLE, VICTORIA, 3178
CALIFORNIA 6660 SANTA BARBARA RD. OHIO SALT LAKE CITY, UT 84115 AUSTRALIA KOREA
LOS ANGELES SUITE 22-24 CINCINNATI PHONE: 801-832-0127 PHONE: (61) (3) 9753 4355 ROOM 210
6480 FLOTILLA ELKRIDGE, MD 21075 2929 CRESCENTVILLE ROAD FAX: 801-832-8911 FAX: (61) (3) 9753 4366 BUPYEONG INDUSTRIAL
COMMERCE, CA 90040 PHONE: 410-579-2135 WEST CHESTER, OH 45069 COMMERCIAL COOPERATIVE
PHONE: 323-724-6771 FAX: 410-579-2677 PHONE: 513-771-2600 WISCONSIN BALDOR CENTROAMERICA 396-16 CHEONGCHEON
FAX: 323-721-5859 FAX: 513-772-2219 MILWAUKEE RESIDENCIAL PINARES 2-DONG,
MASSACHUSETTS 2725 SOUTH 163RD STREET DE SUIZA BUPYEONG-GU
HAYWARD BOSTON CLEVELAND NEW BERLIN, WI 53151 POL. 15 #44, NVA. INCHEON, KOREA, 403-858
21056 FORBES STREET 6 PULLMAN STREET 8929 FREEWAY DRIVE PHONE: 262-784-5940 SAN SALVADOR PHONE: 82 32 508 3252
HAYWARD, CA 94545 WORCESTER, MA 01606 MACEDONIA, OH 44056 FAX: 262-784-1215 EL SALVADOR, FAX: 82 32 508 3253
PHONE: 510-785-9900 PHONE: 508-854-0708 PHONE: 330-468-4777 CENTRO AMERICA
FAX: 510-785-9910 FAX: 508-854-0291 FAX: 330-468-4778 INTERNATIONAL SALES PHONE: (503) 288-1519 MÉXICO
FORT SMITH, AR FAX: (503) 288-1518 KM. 2.0 BLVD. AL
COLORADO MICHIGAN OKLAHOMA P.O. BOX 2400 AEROPUERTO
DENVER DETROIT TULSA FORT SMITH, AR 72902 BALDOR SUDAMERICA LEÓN 37545, GUANAJUATO,
2520 W BARBERRY PLACE 33782 STERLING PONDS 2 EAST DAWES PHONE: 479-646-4711 CALLE F, EL CANGREJO MÉXICO
DENVER, CO 80204 BLVD. BIXBY, OK 74008 FAX: 479-648-5895 CONDOMINIO P.H. CONDADO PHONE: 52 477 761 2030
PHONE: 303-623-0127 STERLING HEIGHTS, PHONE: 918-366-9320 PLAZA FAX: 52 477 761 2010
FAX: 303-595-3772 MI 48312 FAX: 918-366-9338 CANADA APT. 11D, BELLA VISTA
PHONE: 586-978-9800 EDMONTON, ALBERTA PANAMÁ CITY, REP. MIDDLE EAST & NORTH
CONNECTICUT FAX: 586-978-9969 OREGON 4053-92 STREET DE PANAMÁ AFRICA
WALLINGFORD PORTLAND EDMONTON, ALBERTA PHONE: (507) 265-6041 VSE INTERNATIONAL CORP.
65 SOUTH TURNPIKE ROAD GRAND RAPIDS 20393 SW AVERY COURT T6E 6R8 3233 NORTH ARLINGTON
WALLINGFORD, CT 06492 668 3 MILE ROAD NW TUALATIN, OR 97062 PHONE: 780-434-4900 CHINA HEIGHTS
PHONE: 203-269-1354 GRAND RAPIDS, MI 49504 PHONE: 503-691-9010 FAX: 780-438-2600 SHANGHAI JIAHUA SUITE 100W
FAX: 203-269-5485 PHONE: 616-785-1784 FAX: 503-691-9012 BUSINESS CENTER ARLINGTON HEIGHTS,
FAX: 616-785-1788 OAKVILLE, ONTARIO ROOM NO. A-8421 IL 60004
FLORIDA PENNSYLVANIA 2750 COVENTRY ROAD 808 HONG QIAO ROAD PHONE: 847 590 5547
TAMPA/PUERTO RICO/ MINNESOTA PHILADELPHIA OAKVILLE, ONTARIO L6H 6R1 SHANGHAI 200030
VIRGIN ISLANDS MINNEAPOLIS 1035 THOMAS BUSCH PHONE: 905-829-3301 PHONE: 86-21-64473060 SINGAPORE
3906 EAST 11TH AVENUE 21080 134TH AVE. NORTH MEMORIAL HIGHWAY FAX: 905-829-3302 FAX: 86-21-64078620 51 KAKI BUKIT ROAD 2
TAMPA, FL 33605 ROGERS, MN 55374 PENNSAUKEN, NJ 08110 K B WAREHOUSE COMPLEX
PHONE: 813-248-5078 PHONE: 763-428-3633 PHONE: 856-661-1442 MONTREAL, QUEBEC GERMANY SINGAPORE 417863
FAX: 813-247-2984 FAX: 763-428-4551 FAX: 856-663-6363 1844 WILLIAM STREET DIESELSTRASSE 22 PHONE: (65) 6 744 2572
MONTREAL, QUEBEC D-85551 KIRCHHEIM FAX: (65) 6 747 1708
GEORGIA MISSOURI PITTSBURGH H3J 1R5 MUNICH, GERMANY
ATLANTA ST LOUIS 616H BEATTY ROAD PHONE: 514-933-2711 PHONE: (49) (89) 90508 - 0 SWITZERLAND
62 TECHNOLOGY DR. 422 INDUSTRIAL DRIVE MONROEVILLE, PA 15146 FAX: 514-933-8639 FAX: (49) (89) 90508 - 492 POSTFACH 73
ALPHARETTA, GA 30005 MARYLAND HEIGHTS, PHONE: 412-380-7244 SCHUTZENSTRASSE 59
PHONE: 770-772-7000 MO 63043 FAX: 412-380-7250 VANCOUVER, INDIA CH-8245 FEUERTHALEN
FAX: 770-772-7200 PHONE: 314-298-1800 BRITISH COLUMBIA 14, COMMERCE AVENUE SWITZERLAND
FAX: 314-298-7660 TENNESSEE 1538 KEBET WAY MAHAGANESH COLONY PHONE: (41) (52) 6474700
ILLINOIS MEMPHIS PORT COQUITLAM, BC PAUD ROAD FAX: (41) (52) 6592394
CHICAGO KANSAS CITY 4000 WINCHESTER ROAD V3C 5M5 PUNE - 411 038
1601 FRONTENAC ROAD 915 N W PLATTE VALLEY DR MEMPHIS, TN 38118 PHONE 604-421-2822 MAHARASHTRA, INDIA TAIWAN
NAPERVILLE, IL 60563 RIVERSIDE, MO 64150 PHONE: 901-365-2020 FAX: 604-421-3113 PHONE: 91 20 25 45 95 31/32 4F, NO. 25, SEC. 1
PHONE: 630-848-5100 PHONE: 816-587-0272 FAX: 901-365-3914 FAX: 91 20 24 55 95 30 TUNHUA S ROAD
FAX: 630-848-5110 FAX: 816-587-3735 WINNIPEG, MANITOBA TAIPEI 10557, TAIWAN, R.O.C.
TEXAS 54 PRINCESS STREET ITALY PHONE: (886-2) 2577-4352
INDIANA NEW YORK HOUSTON WINNIPEG, MANITOBA BALDOR ASR AG FAX: (886-2) 2577-4157
INDIANAPOLIS AUBURN 4647 PINE TIMBERS R3B 1K2 SUCCURSALE DI MENDRISIO
5525 W. MINNESOTA STREET ONE ELLIS DRIVE SUITE # 135 PHONE: 204-942-5205 VIA BORROMINI, 20A UNITED KINGDOM
INDIANAPOLIS, IN 46241 AUBURN, NY 13021 HOUSTON, TX 77041 FAX: 204-956-4251 CH-6850 MENDRISIO 6 BRISTOL DISTRIBUTION
PHONE: 317-246-5100 PHONE: 315-255-3403 PHONE: 713-895-7062 SWITZERLAND PARK
FAX: 317-246-5110 FAX: 315-253-9923 FAX: 713-690-4540 PHONE: 41 91 640 9952 HAWKLEY DRIVE
800-428-4141 FAX: 41 91 630 2633 BRISTOL BS32 0BF U.K.
PHONE: 44 1454 850000
FAX: 44 1454 859001

Baldor Electric Company

P.O. Box 2400
Fort Smith, AR 72902-2400 U.S.A.
Ph (479) 646-4711 • Fax (479) 648-5792
© Baldor Electric Company International Fax (479) 648-5895 Printed in U.S.A.
BR1502 www.baldor.com 3/05 PROG 5000