Scribd
Upload
93 views2 pages

BT Staircase

The document describes the common features and terminology used for staircases. It explains the basic parts of staircases including inner and outer strings, treads, risers, newel posts, and balusters. While the styles of newel posts and balusters have changed over time, the basic features have remained the same. Traditionally, staircases were assembled by hand on-site but now they are often mass produced for easier assembly. The traditional method of securing treads and risers was with wooden wedges, while modern staircases typically use glued blocks.

Uploaded by

Rianna Clarisse Uriarte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
93 views2 pages

BT Staircase

The document describes the common features and terminology used for staircases. It explains the basic parts of staircases including inner and outer strings, treads, risers, newel posts, and balusters. While the styles of newel posts and balusters have changed over time, the basic features have remained the same. Traditionally, staircases were assembled by hand on-site but now they are often mass produced for easier assembly. The traditional method of securing treads and risers was with wooden wedges, while modern staircases typically use glued blocks.

Uploaded by

Rianna Clarisse Uriarte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Staircases

Staircases come in all sorts of sizes and arrangements depending upon the property. The main common
features are illustrated below and the terminology is explained in the full glossary below that.

1. Inner (closed) string.


2. Outer (open) string. 7. Banister (handrail).
3. Tread. 8. Return nosing.
4. Riser. 9. Fascia.
5. Newel post. 10. Landing.
6. Balusters. 11. Curtail.

Over the years the basic features of staircases have not changed, however the style of the newel posts and
balusters have changed (on older staircases, the newel posts and balusters were often more ornate) and on
some staircases the balusters were replaced by a solid in-fill.

Traditionally, the various staircase parts were made in a workshop and the staircase was built on site.
Modern staircases are often mass produced so that the assembly on site is minimised.

The basic traditional method for securing the treads and risers to the
stringers was the use of wedges (as right) while the treads and risers
were secured to each other using glued blocks.

Modern, mass produced staircases tend to use glued blocks between


the treads/stringers and treads/risers.

Glossary of staircase terminology


Balusters - The vertical posts under a banister to the treads of the staircase or to the floor on a landing.

Banister - The handrails down the side of a stairway.

Curtail step - The bottom step of a staircase where it projects sideways and curves around like a 'cur's tail'.
Fascia - The vertical board under the edge of an exposed landing.

Finial - A turned or carved ornament usually in the shape of an urn, ball, bun, spike or figure, often used to
decorate the ends of staircase newel posts.

Half Landing - The flat area of flooring where a stairway makes a turn between floors.

Inner (closed) string - The side of a stairway locating the treads and risers which is set against a wall.

Landing - The flat area of flooring at the top and bottom of a stairway leading to rooms.

Newel post - The vertical post at the turn or end of a banister.

Outer (open) string - The side of a stairway locating the treads and risers which is open to view.

Return nosing - The moulding applied to the ends of the treads where there are exposed in a hallway.

Riser - The vertical part of a step.

Riser wedge - The, normally wooden, wedges used vertically underneath a staircase to secure the risers to
the stingers.

Tread - The horizontal part of a step.

Tread wedge - The, normally wooden, wedges used horizontal underneath a staircase to secure the treads to
the stingers.

Tread/riser blocks - The, normally wooden, blocks used to secure the top of the risers to the front of the
treads along the front edge of steps.

You might also like