OptiX RTN 905 s Radio Transport System

V100R020C10

Product Description

Issue 02
Date 2021-03-30

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2022. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website: https://www.huawei.com
Email: [email protected]

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. i

OptiX RTN 905 s Radio Transport System
Product Description About This Document

About This Document

This document describes the functions, features, structure, and technical

specifications of the OptiX RTN 905 s.

NOTICE

The specifications that are not mentioned in this document or described as

unsupported may be configurable. The product supports only the specifications
that are mentioned in this document and meet specific constraints. If the
specifications that are not mentioned in this document or described as
unsupported are configured, services may be affected or the network may be out
of service.

Product Versions
The following table lists the product versions related to this document.

Product Name Product Version

OptiX RTN 905 s V100R020C10

iMaster NCE V100R020C10

Intended Audience
This document is intended for network planning engineers.

Familiarity with the basic knowledge related to digital microwave communication

technology will help you apply the information in this document.

Symbol Conventions
The symbols that may be found in this document are defined as follows.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. ii

OptiX RTN 905 s Radio Transport System
Product Description About This Document

Symbol Description

Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not

avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not

avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.

General Conventions
The general conventions that may be found in this document are defined as
follows.

Convention Description

Times New Roman Normal paragraphs are in Times New Roman.

Boldface Names of files, directories, folders, and users are in

boldface. For example, log in as user root.

Italic Book titles are in italics.

Courier New Examples of information displayed on the screen are in

Courier New.

Change History
Changes between document issues are cumulative. The latest document issue
contains all the changes made in earlier issues.

Product Version V100R020C10 - Issue 02 (2021-03-30)

This is the second release for V100R020C10. Compared with Issue 01, this issue
includes the following changes.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. iii

OptiX RTN 905 s Radio Transport System
Product Description About This Document

Topic Description

- Fixed the known bugs.

Product Version V100R020C10 - Issue 01 (2020-12-30)

This is the first release for V100R020C10.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. iv

OptiX RTN 905 s Radio Transport System
Product Description Contents

Contents

About This Document................................................................................................................ ii

1 Introduction.............................................................................................................................. 1
1.1 Components.............................................................................................................................................................................. 1
1.2 Typical Application Scenarios.............................................................................................................................................. 4

2 Functions and Features.......................................................................................................... 5

2.1 Basic Functions and Features.............................................................................................................................................. 5
2.2 Ethernet Service Functions................................................................................................................................................... 8

3 Product Structure.................................................................................................................. 11
3.1 IDU 905 s................................................................................................................................................................................. 11
3.1.1 Functional Units and Logical Boards.......................................................................................................................... 11
3.1.2 Service Single Processing Flow..................................................................................................................................... 12
3.1.3 Front Panel.......................................................................................................................................................................... 14
3.1.4 Air Duct................................................................................................................................................................................. 20
3.1.5 Ethernet Optical/Electrical Module Types.................................................................................................................20
3.2 ODU........................................................................................................................................................................................... 22

4 Network Management System.......................................................................................... 24

4.1 Network Management Solution...................................................................................................................................... 24
4.2 Web LCT................................................................................................................................................................................... 25
4.3 iMaster NCE............................................................................................................................................................................ 26

5 Technical Specifications....................................................................................................... 30
5.1 RF Specifications................................................................................................................................................................... 30
5.1.1 Microwave Working Modes and Air Interface Capacity.......................................................................................30
5.1.2 Receiver Sensitivity............................................................................................................................................................34
5.1.3 Frequency Band..................................................................................................................................................................44
5.1.4 Transceiver Performance................................................................................................................................................. 45
5.2 Predicted Equipment Reliability....................................................................................................................................... 50
5.2.1 Predicted Component Reliability.................................................................................................................................. 51
5.2.2 Predicted Link Reliability................................................................................................................................................. 51
5.3 Ethernet Interface Specifications..................................................................................................................................... 52
5.4 Equipment Performance..................................................................................................................................................... 56

6 Accessories.............................................................................................................................. 60

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. v

OptiX RTN 905 s Radio Transport System
Product Description Contents

6.1 Power Adapter....................................................................................................................................................................... 60

6.2 SSC6PDU.................................................................................................................................................................................. 65
6.2.1 Front Panel.......................................................................................................................................................................... 65
6.2.2 Functions and Working Principles............................................................................................................................... 67
6.2.3 Power Distribution Mode................................................................................................................................................68
6.3 DPD80-2-8 PDU.....................................................................................................................................................................70
6.3.1 Front Panel and Internal Structure..............................................................................................................................70
6.3.2 Functions and Working Principles............................................................................................................................... 71
6.3.3 Power Distribution Mode................................................................................................................................................72

7 Cables....................................................................................................................................... 73
7.1 Power Cable............................................................................................................................................................................ 73
7.2 IDU PGND Cable................................................................................................................................................................... 74
7.3 IF Cable..................................................................................................................................................................................... 75
7.4 IF Jumper................................................................................................................................................................................. 77
7.5 Fiber Jumper........................................................................................................................................................................... 78
7.6 Network Cable....................................................................................................................................................................... 80

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. vi

OptiX RTN 905 s Radio Transport System
Product Description 1 Introduction

1 Introduction

The OptiX RTN 905 s is a split microwave device developed by Huawei. It is mainly
used for enterprise private lines.

1.1 Components
The OptiX RTN 905 s adopts a split structure, consisting of the IDU 905 s, ODU,
and antenna. An ODU is connected to the IDU 905 s through an IF cable.
1.2 Typical Application Scenarios

1.1 Components
The OptiX RTN 905 s adopts a split structure, consisting of the IDU 905 s, ODU,
and antenna. An ODU is connected to the IDU 905 s through an IF cable.

Figure 1-1 shows the components of the OptiX RTN 905 s.

Figure 1-1 Components of the OptiX RTN 905 s

IDU 905 s
The IDU 905 s is the indoor unit of the OptiX RTN 905 s. It provides functions
including service access, multiplexing, IF processing, and system communication
and control.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 1

OptiX RTN 905 s Radio Transport System
Product Description 1 Introduction

Table 1-1 describes the specifications of the IDU 905 s.

Table 1-1 Main specifications of the IDU 905 s

Item Specifications

Chassis height 1U

Maximum number of 1
microwave directions

Microwave type IP microwave over Native Ethernet

Frequency band 7–38 GHz

Channel spacing 7/14/28/40/56 MHz

RF configuration mode 1+0

Highest modulation 2048QAM

scheme

Service port type ● FE optical/electrical port

● GE optical/electrical port
● 2.5GE optical port

Figure 1-2 IDU 905 s

ODU
The ODU is the outdoor unit of the OptiX RTN 905 s. It provides functions
including frequency conversion and power amplification of signals.

The OptiX RTN 905 s can use the XMC-3 ODU/XMC-3W ODU to cover all
frequency bands from 7 GHz to 38 GHz.

Table 1-2 ODUs supported by the OptiX RTN 905 s

ODU Type Description

Frequency Band Highest Modulation Channel Spacing

Scheme

XMC-3 7/8/11/13/15/18/23/26 2048QAM 7/14/28/40/56 MHz

/28/32/38 GHz

XMC-3W 7/8/13/18/15/23 GHz 2048QAM 7/14/28/40/56 MHz

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 2

OptiX RTN 905 s Radio Transport System
Product Description 1 Introduction

There are two methods for mounting the ODU and the antenna: direct mounting
and separate mounting.

● Direct mounting is generally adopted when a small- or medium-diameter

single-polarized antenna is used. In this case, one ODU is used with one
antenna, and the ODU is directly mounted at the rear of the antenna. Figure
1-3 shows direct mounting.

Figure 1-3 Direct mounting

● Separate mounting is generally adopted when a large- or medium-diameter

single-polarized antenna is used. Figure 1-4 shows separate mounting.

Figure 1-4 Separate mounting

NOTE

The OptiX RTN 905 s provides a full-band antenna solution that offers antennas with a
diameter of 0.3 m to 3.7 m and the corresponding antenna accessories.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 3

OptiX RTN 905 s Radio Transport System
Product Description 1 Introduction

1.2 Typical Application Scenarios

The OptiX RTN 905 s provides one RF port and multiple Ethernet ports, which are
mainly used for point-to-point Ethernet service transmission on enterprise private
lines.

Figure 1-5 Point-to-point standalone networking

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 4

OptiX RTN 905 s Radio Transport System
Product Description 2 Functions and Features

2 Functions and Features

The OptiX RTN 905 s provides a wide assortment of functions and features to
ensure the quality and efficiency of service transmission.

Table 2-1 Key features supported by the OptiX RTN 905 s

Feature Name Section

AM 2.1 Basic Functions and Features

ATPC

QoS 2.2 Ethernet Service Functions

HQoS

Physical Layer Clock 2.1 Basic Functions and Features

Synchronization

2.1 Basic Functions and Features

The IDU 905 s has the capabilities of packet switching, system control and
communication, as well as clock processing. It also provides GE service ports and
network management ports.
2.2 Ethernet Service Functions
The IDU 905 s receives, transmits, and processes six channels of FE/GE signals.

2.1 Basic Functions and Features

The IDU 905 s has the capabilities of packet switching, system control and
communication, as well as clock processing. It also provides GE service ports and
network management ports.
Table 2-2 lists the basic functions and features of the IDU 905 s.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 5

OptiX RTN 905 s Radio Transport System
Product Description 2 Functions and Features

Table 2-2 Basic functions and features of the IDU 905 s

Function and Feature Description

Basic Switching capacity Supports 8 Gbit/s packet switching.

functio
ns Microwave service Provides one Integrated IP microwave
capability channel.

System control and ● Manages the IDU and ODU.

communication ● Collects information about performance
events and alarms.
● Communicates with the network
management system (NMS) to enable
NE control and management on the
NMS.

Clock Clock source Traces the clock source and provides each
unit with the system clock and frame
headers for service signals and overhead
signals.
The clock sources that can be traced
include:
● Microwave link clock
● Synchronous Ethernet clock, which is not
supported by small form-factor
pluggable (SFP) electrical modules

Clock protection ● Protection based on the clock source

priority.
● Protection based on the Synchronization
Status Message (SSM) protocol
● Protection based on the extended SSM
protocol
NOTE
Only microwave ports and Ethernet service ports
support clock protection based on the standard
SSM protocol and the extended SSM protocol.

Netwo Data Outband Supports up to one data communications

rk communic DCN channel (DCC) (one IF port).
manag ation
ement network Inband Supported, with DCN bandwidths
(DCN) DCN configurable
channel

DCN management ● Huawei Embedded Control Channel

protocol (HWECC) protocol
● IP protocol
● L2 DCN

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 6

OptiX RTN 905 s Radio Transport System
Product Description 2 Functions and Features

Function and Feature Description

Simple Network Provides SNMP Get and Set functions for

Management Protocol managing devices.
(SNMP)

IF Basic functions ● Receives and transmits IF signals.

process ● Provides management channels to the
ing ODU.
● Supplies –48 V power to the ODU.

Number of IF ports 1

Microwave type Integrated IP microwave

Integrated IP microwave Native E1+Ethernet

service type NOTE
The number of E1s is always zero.

Automatic transmit Supported

power control (ATPC)

Adaptive modulation Supported

(AM)

Ethernet frame header Supported

compression

Microwave capacity and See 5.1.1 Microwave Working Modes and

microwave working Air Interface Capacity.
mode

Ethernet service functions See 2.2 Ethernet Service Functions.

Auxilia Ethernet NMS port One 10/100BASE-T(X) port

ry
ports
and
manag
ement
ports

Operat Loopback ● Supports IF inloops, IF outloops,

ion multiplexer-unit inloops, and
and multiplexer-unit outloops at IF ports.
mainte ● Supports PHY-layer inloops at Ethernet
nance ports.
(O&M)
● Supports MAC-layer inloops at Ethernet
ports.

In-service field Supported

programmable gate
array (FPGA) loading

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 7

OptiX RTN 905 s Radio Transport System
Product Description 2 Functions and Features

Function and Feature Description

Pseudo random binary Supports PRBS bit error rate (BER) tests at
sequence (PRBS) test IF ports.

SFP module information Supported

query

Manufacturer Supported
information query

Power consumption Supported

query

Temperature monitoring Supported

Voltage monitoring Supported

Indicator monitoring Supported

2.2 Ethernet Service Functions

The IDU 905 s receives, transmits, and processes six channels of FE/GE signals.
Table 2-3 lists the Ethernet service functions of the IDU 905 s.

Table 2-3 Ethernet service functions

Function and Feature Description

Basic functions Receives, transmits, and processes Ethernet

service signals.

Port Unpluggable GE Four 10/100/1000BASE-T(X) ports

specifications electrical port

2.5GE/GE/FE Two ports that support the following

port SFP/SFP+ modules:
● Dual-fiber bidirectional 2.5GE optical
module
● Dual-fiber bidirectional FE/GE optical
module
● Single-fiber bidirectional FE/GE optical
module
● 10/100/1000BASE-T(X) GE electrical
module

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 8

OptiX RTN 905 s Radio Transport System
Product Description 2 Functions and Features

Function and Feature Description

Port Working mode ● 2.5GE optical port: supports the 2500M

attributes full-duplex mode.
● GE electrical port: supports the 10M/
100M/1000M full-duplex and auto-
negotiation modes.
● GE optical port: supports the 1000M full-
duplex and auto-negotiation modes.
● FE optical port: supports the 100M full-
duplex mode.

TAG attribute Supports the following Ethernet port TAG

attributes: Tag Aware, Access, and Hybrid.

Jumbo frame Supports jumbo frames with a maximum

length of 9600 bytes.

Traffic control Supports port-based traffic control in

compliance with IEEE 802.3x.

Services Ethernet line (E- ● E-Line services based on ports

Line) service ● E-Line services based on port+VLAN
● E-Line services carried by 802.1Q in
802.1Q (QinQ) links

Ethernet local ● E-LAN services based on IEEE 802.1d

area network (E- bridges
LAN) service ● E-LAN services based on IEEE 802.1q
bridges
● E-LAN services based on IEEE 802.1ad
bridges

Link aggregation group (LAG) Supported

Spanning Tree Protocol (STP)/ Supports Multiple Spanning Tree Protocol

Rapid Spanning Tree Protocol (MSTP) that runs only Common and Internal
(RSTP) Spanning Tree (CIST), providing the same
functions as RSTP.

Internet Group Management Supported

Protocol (IGMP) snooping

Link-state pass through (LPT) Supported

Port mirroring Supported

Link Layer Discovery Protocol Supported

(LLDP)

Quality of Differentiated Supports mapping Ethernet services to PHBs

service (QoS) services by C-VLAN priority, S-VLAN priority, or DSCP
(DiffServ) value of IP packets (including IPv4 and IPv6
packets).

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 9

OptiX RTN 905 s Radio Transport System
Product Description 2 Functions and Features

Function and Feature Description

Complex traffic Supports traffic classification at ports by

classification SMAC address, DMAC address, VLAN ID,
VLAN priority, IP address, DSCP, protocol
type, port number, or ICMP type.

Traffic policing Supports flow-based traffic policing and

allows the peak information rate (PIR) and
committed information rate (CIR) to be
specified in steps of 64 kbit/s.

Queue ● Supports eight-tiered priority queue

scheduling scheduling on each Ethernet port or
Integrated IP microwave port.
● Allows the queue scheduling scheme
(strict priority [SP], weighted round robin
[WRR], or SP+WRR) to be specified for
each Ethernet port or Integrated IP
microwave port.

Congestion Drops packets in tail drop mode or weighted

avoidance random early detection (WRED) mode.

Traffic shaping Supports shaping for a specific port, priority

queue, or service flow, and allows the PIR
and CIR to be specified in steps of 64 kbit/s.

Hierarchical QoS Supports HQoS scheduling by port, virtual

(HQoS) user-network interface (V-UNI), V-UNI
group, and QinQ link.

ETH OAM Ethernet service ● Supports ETH OAM functions that comply
OAM with IEEE 802.1ag.
● Supports packet loss, delay, and delay
variation detection that comply with ITU-
T Y.1731.

Ethernet port Supports ETH OAM functions that comply

OAM with IEEE 802.3ah.

Remote network monitoring Supported

(RMON)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 10

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

3 Product Structure

This chapter describes the system architecture, hardware architecture, and

software architecture of the product, in addition to how the system processes
service signals.

3.1 IDU 905 s

The IDU 905 s is the indoor unit of the RTN 905 s.
3.2 ODU
The ODU is an integrated device that is available in several models. Different
models of ODUs have basically the same structure and working principle.

3.1 IDU 905 s

The IDU 905 s is the indoor unit of the RTN 905 s.

3.1.1 Functional Units and Logical Boards

The IDU 905 s is a compact case-shaped device, and it physically comprises an
integrated system board.

On the NMS, each functional unit on the system board of the IDU 905 s is
mapped to a logical board and is allocated a logical slot, thereby allowing object-
specific network management.

NOTE

The system board of the IDU 905 s is SLD3IRU1A01.

Figure 3-1 Logical board configuration of the IDU 905 s

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 11

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

The logical slot for the ODU is 23 on the NMS.

Table 3-1 Logical boards of the IDU 905 s

Board
Acronym Board Name Logical Slot Description

CSPS Hybrid system Slot 1 ● Supports 8 Gbit/s packet switching.

control, ● Performs system communication and
switching, and control.
timing board
● Processes clock and time signals.
● Provides one Ethernet NMS port.

ISV3 Versatile IF Slot 3 ● Provides one IF port.

board ● When interconnecting with the OptiX RTN
905 s or the ISV3 board of the RTN 910/RTN
910A/RTN 950/RTN 950A/RTN 980: supports
QPSK to 2048QAM (2048QAM is supported
only when AM is enabled), QPSK/16QAM
Strong FEC, and 512QAM/1024QAM Light
FEC.
● Supports Integrated IP microwave and the
Native E1+Ethernet service mode, with the
number of E1s fixed at 0.
● Supports the AM function.
● Supports Ethernet frame header
compression.

EG6 4-port RJ45+2- Slot 7 Provides six GE ports, among which four are
port SFP RJ45 GE electrical ports and the other two use
Gigabit SFP modules to work as 2.5GE/GE/FE optical
Ethernet (GE) ports or GE electrical ports. The GE electrical
interface ports are compatible with FE electrical ports.
board

PIU Power board Slot 5 Provides one –48 V DC power input.

FAN Fan board Slot 6 Air-cools the IDU.

3.1.2 Service Single Processing Flow

This section describes how the OptiX RTN 905 s processes Ethernet service signals
carried by Integrated IP microwave.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 12

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

Figure 3-2 Service signal processing flow

Table 3-2 Service signal processing flow in the transmit direction

SN Component Signal Processing Description

1 EG6 ● Receives FE/GE signals.

● Performs decoding.
● Performs frame delimitation, preamble removal,
and CRC code processing.
● Forwards Ethernet frames to the packet switching
unit of the CSPS.

2 CSPS Packet switching unit: processes Ethernet frames

based on configurations and Layer 2 protocols and
forwards the Ethernet frames to the ISV3.

3 ISV3 ● Selects a modulation scheme based on the

current channel quality.
● Maps the Ethernet frames into the microwave
frame payload area and adds microwave frame
overheads to form complete microwave frames.
● Performs FEC coding.
● Performs digital modulation.
● Performs D/A conversion.
● Performs analog modulation.
● Combines the analog IF signals and the ODU
O&M signals.
● Transmits the combined signals and supplies –48
V power to the ODU through the IF cable.

4 ODU ● Splits the combined signals into analog IF signals,

ODU O&M signals, and –48 V power signals.
● Up-converts and amplifies the analog IF signals
into RF signals on the transmit frequency.
● Transmits the RF signals to the antenna through
the waveguide.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 13

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

Table 3-3 Service signal processing flow in the receive direction

SN Component Signal Processing Description

1 ODU ● Isolates and filters RF signals.

● Down-converts and amplifies the RF signals into
analog IF signals.
● Combines the analog IF signals and the ODU
O&M signals.
● Transmits the combined signals to the IF board
through the IF cable.

2 ISV3 ● Splits the received signals into analog IF signals

and ODU O&M signals.
● Performs A/D conversion.
● Performs digital demodulation.
● Performs time domain adaptive equalization.
● Performs FEC decoding.
● Synchronizes and descrambles the frames.
● Extracts overheads from the microwave frames.
● Extracts Ethernet signals from the microwave
frames and transmits the signals to the packet
switching unit of the CSPS.

3 CSPS Packet switching unit: processes Ethernet frames

based on configurations and Layer 2 protocols and
forwards the Ethernet frames to the EG6.

4 EG6 ● Performs frame delimitation, preamble addition,

and CRC code processing.
● Performs coding.
● Outputs FE/GE signals.

3.1.3 Front Panel

The IDU 905 s has indicators, service ports, IF ports, and network management
ports on its front panel.

Figure 3-3 Front panel of the IDU 905 s

1. Ground terminal 2. Power port 3. Indicators

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 14

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

4. ODU (IF) port 5. Network management 6. Unpluggable GE

port electrical service ports

7. Ethernet service SFP 8. ESD jack 9. Reserved management

ports ports

Indicators
Indicators visually communicate the operating status of the equipment.

Table 3-4 Description of indicators on the IDU 905 s

Indicator Status Description

STAT Blinking (red) at 100 The BOOTROM self-check fails during the
ms intervals power-on or reset process.

Blinking (green) at Data is being written into the flash

100 ms intervals memory, or software is being loaded
during the power-on or reset process.

Blinking (green) at Software is in the BIOS boot state during

300 ms intervals the power-on or reset process.

On (green) ● The upper layer software is being

initialized during the power-on or reset
process.
● The IDU is working properly.

On (red) ● The memory self-check or upper layer

software loading fails during the
power-on or reset process.
● The logic file or upper layer software is
lost during the running process.
● The IDU or ODU has a hardware fault.

Off The IDU is not working, not created, or not

supplied with power.

SRV On (green) The system is working properly.

On (red) A critical or major alarm occurs in the

system.

On (yellow) A minor or remote alarm occurs in the

system.

PWR On (green) There is –48 V power input.

Off There is no –48 V power input.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 15

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

Indicator Status Description

L/A5 On (green) The connection to the GE5 port is normal

but the GE5 port is not receiving or
transmitting data.

Blinking (yellow) The GE5 port is receiving or transmitting

data.

Off The GE5 port is not connected or the

connection to the GE5 port is abnormal.

L/A6 On (green) The connection to the GE6 port is normal

but the GE6 port is not receiving or
transmitting data.

Blinking (yellow) The GE6 port is receiving or transmitting

data.

Off The GE6 port is not connected or the

connection to the GE6 port is abnormal.

LINK On (green) The microwave link is normal.

On (red) The microwave link is faulty.

Blinking (yellow) at The antennas are not aligned.

300 ms intervals

Off ● The ODU is offline.

● No logical board is configured for the
ODU connected to the IF port.

ACT On (green) The microwave link has been activated.

Off No logical board is added for the ODU

connected to the IF port.

Power Port
The IDU 905 s supports one –48 V power input. Figure 3-4 shows the appearance
of the power port.

Figure 3-4 Appearance of the power port

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 16

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

Table 3-5 Port description

Port Description Connector Type Corresponding

Cable

NEG (-) –48 V power 2 mm HM power 7.1 Power Cable

input connector (2x2 pins)

RTN (+) BGND power

input

Network Management Port

Table 3-6 Network management port

Port Description Connector Type Corresponding

Cable

NMS NMS port RJ45 port 7.6 Network Cable

NOTE

Only the NMS port is available. The N/A ports are reserved network management ports and
are unavailable.

The NMS port uses an RJ45 connector. Figure 3-5 shows the front view of an RJ45
connector.

Figure 3-5 Front view of an RJ45 connector

Table 3-7 Pin assignments for the NMS port

Port Pin Signal

1 Transmitting data (+)

2 Transmitting data (-)

NMS
3 Receiving data (+)

4 Not defined

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 17

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

Port Pin Signal

5 Not defined

6 Receiving data (-)

7 Not defined

8 Not defined

Service Ports

Table 3-8 Service ports

Port Description Connector Type Corresponding Cable

GE1 GE service port RJ45 port 7.6 Network Cable

(unpluggable electrical
GE2 port)
GE3

GE4

GE5 FE/GE/2.5GE service port RJ45 SFP electrical 7.6 Network Cable/7.5 Fiber
(SFP module) module/LC SFP Jumper
GE6 optical
NOTE
When either the GE5 or module/SFP+
GE6 port requires a 2.5GE optical module
optical module, both ports
must be equipped with a
2.5GE optical module.

GE electrical ports support the MDI, MDI-X, and auto-MDI/MDI-X modes. Table
3-9 and Table 3-10 provide the pin assignments.

Table 3-9 Pin assignments for the RJ45 connector in MDI mode
Pin 10/100BASE-T(X) 1000BASE-T

Signal Function Signal Function

1 TX+ Transmitting data (+) BIDA+ Bidirectional data

wire A (+)

2 TX- Transmitting data (-) BIDA- Bidirectional data

wire A (-)

3 RX+ Receiving data (+) BIDB+ Bidirectional data

wire B (+)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 18

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

Pin 10/100BASE-T(X) 1000BASE-T

Signal Function Signal Function

4 Not - BIDC+ Bidirectional data

defined wire C (+)

5 Not - BIDC- Bidirectional data

defined wire C (-)

6 RX- Receiving data (-) BIDB- Bidirectional data

wire B (-)

7 Not - BIDD+ Bidirectional data

defined wire D (+)

8 Not - BIDD- Bidirectional data

defined wire D (-)

Table 3-10 Pin assignments for the RJ45 connector in MDI-X mode

Pin 10/100BASE-T(X) 1000BASE-T

Signal Function Signal Function

1 RX+ Receiving data (+) BIDB+ Bidirectional data

wire B (+)

2 RX- Receiving data (-) BIDB- Bidirectional data

wire B (-)

3 TX+ Transmitting data (+) BIDA+ Bidirectional data

wire A (+)

4 Not - BIDD+ Bidirectional data

defined wire D (+)

5 Not - BIDD- Bidirectional data

defined wire D (-)

6 TX- Transmitting data (-) BIDA- Bidirectional data

wire A (-)

7 Not - BIDC+ Bidirectional data

defined wire C (+)

8 Not - BIDC- Bidirectional data

defined wire C (-)

When the SFP ports on the IDU 905 s function as optical ports, optical modules
are required.
● When dual-fiber bidirectional SFP optical modules are used, one optical
module provides one TX port on the left to transmit signals and one RX port

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 19

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

on the right to receive signals, as shown in Figure 3-6. Each port needs to be
connected to an optical fiber for receiving or transmitting service signals.
● When single-fiber bidirectional optical modules are used, one optical module
provides only the port on the left. This port is an optical port that can receive
and transmit service signals. This port needs to be connected to an optical
fiber for transmitting and receiving service signals.

Figure 3-6 Ports of an SFP optical module

3.1.4 Air Duct

The IDU 905 s is air-cooled with air drawn in from the left side and expelled out
from the right side.

Figure 3-7 shows the air duct in an IDU 905 s.

Figure 3-7 Air duct in an IDU 905 s

3.1.5 Ethernet Optical/Electrical Module Types

The GE SFP ports on the IDU 905 s support multiple types of SFP modules.

Table 3-11 Types of SFP modules that GE/FE ports support

Module BOM Code Module Type Wavelength and

Category Transmission
Distance

Dual-fiber 34060286 1000Base-SX 850 nm, 0.5 km

bidirectional
GE 34060473 1000Base-LX 1310 nm, 10 km

34060298 1000BASE-VX 1310 nm, 40 km

34060513 1550 nm, 40 km

34060360 1000BASE-ZX 1550 nm, 80 km

Single-fiber 34060475 1000BASE-BX-D Transmit: 1490 nm;

bidirectional receive: 1310 nm
GE 10 km

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 20

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

Module BOM Code Module Type Wavelength and

Category Transmission
Distance

34060470 1000BASE-BX-U Transmit: 1310 nm;

receive: 1490 nm
10 km

34060540 1000BASE-BX-D Transmit: 1490 nm;

receive: 1310 nm
40 km

34060539 1000BASE-BX-U Transmit: 1310 nm;

receive: 1490 nm
40 km

Dual-fiber 34060287 100BASE-FX 1310 nm, 2 km

bidirectional
FE 34060276 100BASE-LX 1310 nm, 15 km

34060281 100BASE-VX 1310 nm, 40 km

34060282 100BASE-ZX 1550 nm, 80 km

Single-fiber 34060364 100BASE-BX-D Transmit: 1550 nm;

bidirectional receive: 1310 nm
FE 15 km

34060363 100BASE-BX-U Transmit: 1310 nm;

receive: 1550 nm
15 km

34060329 100BASE-BX-D Transmit: 1550 nm;

receive: 1310 nm
40 km

34060328 100BASE-BX-U Transmit: 1310 nm;

receive: 1550 nm
40 km

Electrical 34100052 10/100/1000BASE- 100 m

T(X)

Table 3-12 Types of SFP+/SFP modules that 2.5GE ports support

Module BOM Code Wavelength and

Category Transmission Distance

Dual-fiber 34060365 850 nm, 0.3 km

bidirectional
34060517 1310 nm, 2 km

34060528 1310 nm, 10 km

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 21

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

3.2 ODU
The ODU is an integrated device that is available in several models. Different
models of ODUs have basically the same structure and working principle.

Block Diagram

Figure 3-8 Block diagram of the ODU

Signal Processing in the Transmit Direction

The multiplexer splits the signal coming from the IF cable into a 350 MHz IF
signal, a 5.5 MHz O&M uplink signal, and a –48 V DC power signal.
In the transmit direction, the IF signal is processed as follows:
1. The IF signal is converted into an RF signal by means of frequency up-
conversion, filtering and amplification, and then is sent to the amplifier unit
(AMP).
2. The AMP amplifies the RF signal (the output power of the signal can be
regulated by IDU software).
3. The amplified RF signal is sent to the antenna through the duplexer.
The O&M uplink signal is a 5.5 MHz ASK-modulated signal and is demodulated in
the control unit (CTRL).
The –48 V DC power signal is sent to the power unit (PWR) where the secondary
power supplies are generated and provided to the modules of the ODU.

Signal Processing in the Receive Direction

The duplexer separates the RF signal from the antenna signal. The low noise
amplifier (LNA) amplifies the RF signal. The amplified RF signal is converted into a
140 MHz IF signal by means of frequency down-conversion, filtering and
amplification, and then is sent to the multiplexer.
The CTRL unit performs ASK modulation on the O&M downlink signal, and sends
the generated 10 MHz modulation signal to the multiplexer. The CTRL unit also

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 22

OptiX RTN 905 s Radio Transport System
Product Description 3 Product Structure

detects the receive signal power through the RSSI detection circuit and provides
the RSSI interface.
The multiplexer combines the received IF signal and O&M downlink signal, and
sends the combined signal to the IDU through the IF cable.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 23

OptiX RTN 905 s Radio Transport System
Product Description 4 Network Management System

4 Network Management System

This chapter describes the network management solution and NMS software that
constitutes this solution.

4.1 Network Management Solution

Huawei offers a complete transmission network management (NM) solution
compliant with TMN for different function domains and customer groups on
telecommunication networks.
4.2 Web LCT
The Web LCT is a local maintenance terminal. The Web LCT provides the following
management functions at the NE layer: NE management, alarm management,
performance management, configuration management, communication
management, security management, and HOP management.
4.3 iMaster NCE
The iMaster Network Cloud Engine (NCE) is a network management system of
Huawei. The NCE integrates the functions of the network management system,
software-defined networking (SDN) controller, and network analysis system. It
provides not only FCAPS functions (fault, configuration, accounting, performance,
and security), but also advanced functions such as network visualization, service
automation, and intelligent O&M.

4.1 Network Management Solution

Huawei offers a complete transmission network management (NM) solution
compliant with TMN for different function domains and customer groups on
telecommunication networks.

The NM solutions consist of the following:

● Web LCT local maintenance terminal

The Web LCT, a Web-based local maintenance terminal, is used to manage
local and remote NEs on a per-NE or hop basis.
● iMaster NCE network management system
The iMaster NCE integrates the functions of the network management
system, SDN controller, and network analysis system. It provides advanced

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 24

OptiX RTN 905 s Radio Transport System
Product Description 4 Network Management System

functions such as network visualization, service automation, and intelligent

O&M.

Figure 4-1 Network management solution for transmission networks

4.2 Web LCT

The Web LCT is a local maintenance terminal. The Web LCT provides the following
management functions at the NE layer: NE management, alarm management,
performance management, configuration management, communication
management, security management, and HOP management.

Function Overview

Table 4-1 Management functions of Web LCT

Function Description

NE Management ● Search of NEs

● Addition or deletion of NEs
● Login or logout of NEs
● Startup of NE Explorer

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 25

OptiX RTN 905 s Radio Transport System
Product Description 4 Network Management System

Function Description

Alarm Management ● Settings of the alarm monitoring strategy

● Viewing of alarms
● Deletion of alarms

Performance ● Settings of the performance monitoring strategy

Management ● Viewing of performance events
● Resetting of performance registers

Configuration ● Basic NE information configuration

Management ● Microwave link configuration
● Protection configuration
● Interface configuration
● Service configuration
● Clock configuration

Communication ● Communication parameter management

Management ● DCC management
● Inband DCN management
● L2DCN management
● HWECC protocol management
● IP protocol management

Security Management ● NE user management

● NE user group management
● LCT access control
● Online user management
● NE security parameters
● NE security log
● NMS user management
● NMS log management
● File transfer protocol management (FTP or SFTP)

HOP Management ● Parameters on both ends of a hop can be set on

the same interface.
● After the parameters on one end of a hop are set,
the parameters on the other end are assigned
values accordingly.

4.3 iMaster NCE

The iMaster Network Cloud Engine (NCE) is a network management system of
Huawei. The NCE integrates the functions of the network management system,
software-defined networking (SDN) controller, and network analysis system. It

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 26

OptiX RTN 905 s Radio Transport System
Product Description 4 Network Management System

provides not only FCAPS functions (fault, configuration, accounting, performance,

and security), but also advanced functions such as network visualization, service
automation, and intelligent O&M.
The NCE delivers these functions by means of applications. The major functions
designed for the RTN network are listed in Table 4-2 and Table 4-3.

Function Overview

Table 4-2 Management functions of the NCE

Function Description

NE-level management ● NE panel browsing

● Built-in NE Explorer implementing all-
around NE-level management

Network- Topology ● Physical topology view

level management ● End-to-end service topology management
manageme
nt ● Clock view
● Automatic topology discovery
● Customized view
● Backup gateway configuration

Network-level ● Network-wide alarm monitoring, statistics,

alarm and management
management ● Customized alarm query template
● Alarm correlation analysis
● Alarm time localization
● Alarm notification
● Alarm dump

Network-level ● Creation of performance monitoring

performance templates
management ● Scheduled monitoring and real-time
monitoring
● Browsing of historical performance data
● Graphic display of performance data
● Comparison of performance data in
different periods or based on different
resources
● Historical performance data dump

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 27

OptiX RTN 905 s Radio Transport System
Product Description 4 Network Management System

Function Description

Network-level ● End-to-end configuration of TDM services

configuration ● End-to-end configuration of MPLS tunnels
management and PWE3 services
● End-to-end configuration of Native E-
Line/E-LAN services
● End-to-end configuration of L3VPN
services

Network-level ● One-click connectivity test of packet

diagnosis and test services
● One-click performance test of packet
services
● One-click intelligent diagnosis of packet
service faults

Network-level ● DCC view management

communication ● Inter-NE Ping and Traceroute tests
management

Network-level ● Account policy management

security ● User group management
management
● Permission management
● RADIUS authentication and authorization
● SSLv3 encrypted communication between
NCE server and NCE client
● SSLv3 encrypted communication between
NCE server and gateway NE
● ACL management of the NCE server
● ACL management of the gateway NE

Inventory management ● Inventory management of equipment such

as NEs, boards, and ports
● Inventory management of fibers/cables
and links

Log management ● Management of NCE operation logs,

system logs, and security logs
● NE security log management
● NE Syslog management

Database management ● NCE database backup and restoration

● NE database backup and restoration
● Synchronization between NE data and
NCE data

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 28

OptiX RTN 905 s Radio Transport System
Product Description 4 Network Management System

Function Description

NE software management ● NE software loading and upgrading

● NE software database management
● NE database saving, backup, and
restoration

Report management ● Management of alarm reports, log reports,

and resource reports
● Display of reports by means of Internet
Explorer
● Output of reports

Northbound interface ● SNMP, CORBA, and XML northbound

interfaces
● Performance text interfaces

Table 4-3 Control functions of the NCE

Function Description

Network Resource Graphic display of resource utilization on the

visualizatio visualization SDN network (including frequency bands and
n channel bandwidths), indicating the status of
network resources in real time

Service Agile service Quick provisioning of QinQ- and VLAN-based

automatio provisioning E-Line services by using templates
n
Bandwidth on Real-time service bandwidth adjustment
demand (BoD)

Monitoring Alarm monitoring Central monitoring of alarms for NEs, system

and services and third-party systems, facilitating
assurance quick troubleshooting and ensuring normal
service operation

Performance Performance monitoring of ports, links, and

monitoring services through the Product Management
System (PMS)

Network Automatic device Comprehensive pre-upgrade check

upgrade software upgrade During the upgrade, upgrade tasks are
combined and software patches are
automatically activated.
After the upgrade, the system automatically
checks for service interruptions.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 29

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

5 Technical Specifications

This chapter describes the technical specifications of the OptiX RTN 905 s.

5.1 RF Specifications
This section describes RF specifications and technical specifications related to
microwave.
5.2 Predicted Equipment Reliability
Equipment reliability consists of component reliability and link reliability.
5.3 Ethernet Interface Specifications
Ethernet interface specifications comply with IEEE 802.3.
5.4 Equipment Performance
This section describes equipment performance in terms of dimensions, weight,
power consumption, power supply, EMC, surge protection, safety, and
environment.

5.1 RF Specifications
This section describes RF specifications and technical specifications related to
microwave.

5.1.1 Microwave Working Modes and Air Interface Capacity

This section lists the microwave working modes and air interface capacities that
the OptiX RTN 905 s supports.

IF Running Modes and Microwave Working Modes

The IF board of the OptiX RTN 905 s supports the IS3 IF running mode.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 30

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Table 5-1 IF running modes

IF Running Mode Application Scenario

IS3 The IS3 mode is the only IF running mode supported by the RTN 905 s.
This mode enables air-interface interconnection between the OptiX RTN
905 s and the OptiX RTN 905 s or between the OptiX RTN 905 s and the
ISV3 board.
There are 13 modulation schemes available in IS3 mode: QPSK Strong,
QPSK, 16QAM Strong, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM,
512QAM, 512QAM Light, 1024QAM, 1024QAM Light, and 2048QAM.
Among them, 2048QAM can be used only when AM is enabled.
The IS3 mode can be used when the XMC-3W ODU or XMC-3 ODU is
used.

Table 5-2 Highest modulation schemes in IS3 mode

Type Frequency Band Highest Modulation Scheme@Channel Spacing

7 MHz 14 MHz 28 MHz 40 MHz 56 MHz

XMC-3 7/8/11/13 GHz 1024QAM 1024QAM 2048QAM 2048QAM 2048QAM

Light

15/18/23/26 GHz 1024QAM 1024QAM 2048QAM 2048QAM 2048QAM

Light

28 GHz 512QAM 1024QAM 2048QAM 2048QAM 2048QAM

38 GHz 512QAM 1024QAM 2048QAM 2048QAM 2048QAM

Light

32 GHz 512QAM 1024QAM 2048QAM 2048QAM 2048QAM

Light

XMC-3W 7/8/13/18/15/23 1024QAM 1024QAM 2048QAM 2048QAM 2048QAM

GHz Light

Air Interface Capacity

Table 5-3 Integrated IP microwave working modes

Channel Modulation Native Ethernet Throughput (Mbit/s)

Spacing Scheme
(MHz) Without With L2 With L2+L3 With L2+L3
Frame Frame Frame Frame
Header Header Header Header
Compression Compression Compression Compression
(IPv4) (IPv6)

7 QPSK Strong 8 to 10 8 to 14 8 to 18 8 to 24

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 31

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Channel Modulation Native Ethernet Throughput (Mbit/s)

Spacing Scheme
(MHz) Without With L2 With L2+L3 With L2+L3
Frame Frame Frame Frame
Header Header Header Header
Compression Compression Compression Compression
(IPv4) (IPv6)

7 QPSK 10 to 13 10 to 17 10 to 22 10 to 31

7 16QAM 17 to 22 17 to 29 17 to 37 18 to 51
Strong

7 16QAM 20 to 26 21 to 34 21 to 45 21 to 61

7 32QAM 25 to 32 25 to 42 26 to 55 26 to 75

7 64QAM 32 to 40 32 to 54 33 to 70 33 to 95

7 128QAM 37 to 48 38 to 63 38 to 82 39 to 112

7 256QAM 42 to 53 43 to 71 43 to 92 44 to 125

7 512QAM 45 to 57 45 to 75 46 to 98 46 to 133

7 512QAM 48 to 61 48 to 80 49 to 105 50 to 142

Light

7 1024QAM 51 to 65 52 to 86 52 to 112 53 to 152

14 (13.75) QPSK Strong 17 to 22 17 to 29 17 to 38 18 to 51

14 (13.75) QPSK 21 to 26 21 to 35 21 to 45 21 to 62

14 (13.75) 16QAM 35 to 45 35 to 59 36 to 77 36 to 105

Strong

14 (13.75) 16QAM 41 to 53 42 to 69 42 to 91 43 to 123

14 (13.75) 32QAM 52 to 66 52 to 87 53 to 114 54 to 154

14 (13.75) 64QAM 65 to 83 66 to 109 67 to 143 68 to 194

14 (13.75) 128QAM 77 to 98 78 to 129 79 to 169 80 to 229

14 (13.75) 256QAM 88 to 112 89 to 148 90 to 193 92 to 262

14 (13.75) 512QAM 94 to 119 95 to 157 96 to 205 97 to 278

14 (13.75) 512QAM 100 to 127 101 to 168 102 to 219 104 to 297
Light

14 (13.75) 1024QAM 104 to 131 105 to 174 106 to 227 107 to 307

14 (13.75) 1024QAM 109 to 138 110 to 182 111 to 238 113 to 323
Light

28 (27.5) QPSK Strong 36 to 46 36 to 61 37 to 79 37 to 107

28 (27.5) QPSK 42 to 54 43 to 71 43 to 93 44 to 126

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 32

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Channel Modulation Native Ethernet Throughput (Mbit/s)

Spacing Scheme
(MHz) Without With L2 With L2+L3 With L2+L3
Frame Frame Frame Frame
Header Header Header Header
Compression Compression Compression Compression
(IPv4) (IPv6)

28 (27.5) 16QAM 73 to 93 74 to 123 75 to 161 76 to 218

Strong

28 (27.5) 16QAM 86 to 109 87 to 144 88 to 188 89 to 255

28 (27.5) 32QAM 110 to 139 111 to 184 112 to 240 114 to 325

28 (27.5) 64QAM 135 to 172 137 to 227 138 to 296 140 to 402

28 (27.5) 128QAM 160 to 203 162 to 268 164 to 351 166 to 475

28 (27.5) 256QAM 183 to 232 185 to 306 187 to 400 190 to 542

28 (27.5) 512QAM 196 to 249 198 to 328 200 to 429 203 to 581

28 (27.5) 512QAM 210 to 266 212 to 351 214 to 459 218 to 622
Light

28 (27.5) 1024QAM 217 to 275 220 to 364 222 to 475 225 to 644

28 (27.5) 1024QAM 228 to 289 230 to 382 233 to 499 237 to 676
Light

28 (27.5) 2048QAM 242 to 306 244 to 405 247 to 529 251 to 716

56 (55) QPSK Strong 73 to 93 74 to 123 75 to 161 76 to 218

56 (55) QPSK 86 to 109 87 to 144 88 to 188 89 to 255

56 (55) 16QAM 148 to 188 150 to 248 151 to 325 154 to 440
Strong

56 (55) 16QAM 173 to 220 175 to 290 177 to 379 180 to 514

56 (55) 32QAM 217 to 275 219 to 363 222 to 475 225 to 643

56 (55) 64QAM 273 to 346 276 to 457 279 to 597 283 to 809

56 (55) 128QAM 323 to 409 327 to 541 330 to 706 335 to 957

56 (55) 256QAM 369 to 467 373 to 617 376 to 806 383 to 999

56 (55) 512QAM 395 to 501 400 to 661 404 to 864 410 to 1000

56 (55) 512QAM 423 to 536 427 to 708 432 to 925 439 to 1000
Light

56 (55) 1024QAM 447 to 567 452 to 748 456 to 978 464 to 1000

56 (55) 1024QAM 481 to 609 486 to 805 491 to 999 499 to 1000
Light

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 33

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Channel Modulation Native Ethernet Throughput (Mbit/s)

Spacing Scheme
(MHz) Without With L2 With L2+L3 With L2+L3
Frame Frame Frame Frame
Header Header Header Header
Compression Compression Compression Compression
(IPv4) (IPv6)

56 (55) 2048QAM 502 to 636 507 to 839 512 to 999 520 to 1000

40 QPSK Strong 50 to 63 50 to 83 51 to 109 51 to 147

40 QPSK 58 to 74 59 to 97 59 to 127 60 to 173

40 16QAM 100 to 127 101 to 168 102 to 220 104 to 298

Strong

40 16QAM 117 to 149 119 to 197 120 to 257 122 to 348

40 32QAM 150 to 190 152 to 251 153 to 328 156 to 444

40 64QAM 185 to 235 187 to 310 189 to 405 192 to 549

40 128QAM 219 to 278 221 to 367 224 to 479 227 to 649

40 256QAM 253 to 321 256 to 423 258 to 553 262 to 749

40 512QAM 268 to 340 271 to 449 274 to 586 278 to 794

40 512QAM 287 to 363 290 to 480 293 to 627 298 to 850

Light

40 1024QAM 302 to 383 305 to 506 309 to 661 314 to 895

40 1024QAM 317 to 402 321 to 531 324 to 694 329 to 940

Light

40 2048QAM 330 to 418 333 to 552 337 to 721 342 to 977

5.1.2 Receiver Sensitivity

The RTN 905 s supports Integrated IP microwave.
The IF board of the OptiX RTN 905 s supports the IS3 IF running mode.

NOTE

The guaranteed receiver sensitivity requires a 3 dB backoff from the typical value.
Unless otherwise specified (for example, XMC-3W ODU), the receiver sensitivity
specifications in the following tables do not vary with ODU types. However, the supported
frequency bands and modulation schemes vary with ODU types.
N/A means that microwave working mode is not supported.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 34

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Table 5-4 Typical receiver sensitivity of the Integrated IP microwave (I)

Item Specifications (Channel Spacing: 7 MHz)

QPSK QPSK 16QAM 16QAM 32QAM 64QAM

Strong Strong

RSL@BER = 10-6 (dBm)

@7 GHz -96 -94 -89.5 -87.5 -84.5 -81.5

@8 GHz -96 -94 -89.5 -87.5 -84.5 -81.5

@7 & 8 -95 -93 -88.5 -86.5 -83.5 -80.5

GHz
(XMC-3W)

@11 GHz -95.5 -93.5 -89 -87 -84 -81

@13 GHz -94.5 -92.5 -88 -86 -83 -80

(XMC-3W)

@13 GHz -95.5 -93.5 -89 -87 -84 -81

@15 GHz -94.5 -92.5 -88 -86 -83 -80

(XMC-3W)

@15 GHz -95.5 -93.5 -89 -87 -84 -81

@18 GHz -94 -92 -87.5 -85.5 -82.5 -79.5

(XMC-3W)

@18 GHz -95 -93 -88.5 -86.5 -83.5 -80.5

@23 GHz -94 -92 -87.5 -85.5 -82.5 -79.5

(XMC-3W)

@23 GHz -95 -93 -88.5 -86.5 -83.5 -80.5

@26 GHz -94.5 -92.5 -88 -86 -83 -80

@28 GHz -94 -92 -87.5 -85.5 -82.5 -79.5

@32 GHz -93.5 -91.5 -87 -85 -82 -79

@38 GHz -93 -91 -86.5 -84.5 -81.5 -78.5

Table 5-5 Typical receiver sensitivity of the Integrated IP microwave (II)

Item Specifications (Channel Spacing: 7 MHz)

128QAM 256QAM 512QAM 512QAM 1024QAM

Light

RSL@BER = 10-6 (dBm)

@7 GHz -78.5 -75.5 -73.5 -72 -70

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 35

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications (Channel Spacing: 7 MHz)

128QAM 256QAM 512QAM 512QAM 1024QAM

Light

@8 GHz -78.5 -75.5 -73.5 -72 -70

@7 & 8 GHz -77.5 -74.5 -72.5 -71 -69

(XMC-3W)

@11 GHz -78 -75 -73 -71.5 -69.5

@13 GHz -77 -74 -72 -70.5 -68.5

(XMC-3W)

@13 GHz -78 -75 -73 -71.5 -69.5

@15 GHz -77 -74 -72 -70.5 -68.5

(XMC-3W)

@15 GHz -78 -75 -73 -71.5 -69.5

@18 GHz -76.5 -73.5 -71.5 -70 -68

(XMC-3W)

@18 GHz -77.5 -74.5 -72.5 -71 -69

@23 GHz -76.5 -73.5 -71.5 -70 -68

(XMC-3W)

@23 GHz -77.5 -74.5 -72.5 -71 -69

@26 GHz -77 -74 -72 -70.5 -68.5

@28 GHz -76.5 -73.5 -71.5 N/A N/A

@32 GHz -76 -73 -71 -69.5 N/A

@38 GHz -75.5 -72.5 -70.5 -69 N/A

Table 5-6 Typical receiver sensitivity of the Integrated IP microwave (III)

Item Specifications (Channel Spacing: 14 MHz)

QPSK QPSK 16QAM 16QAM 32QAM 64QAM

Strong Strong

RSL@BER = 10-6 (dBm)

@7 GHz -94 -92 -86.5 -84.5 -81.5 -78.5

@8 GHz -94 -92 -86.5 -84.5 -81.5 -78.5

@7 & 8 -93 -91 -85.5 -83.5 -80.5 -77.5

GHz
(XMC-3W)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 36

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications (Channel Spacing: 14 MHz)

QPSK QPSK 16QAM 16QAM 32QAM 64QAM

Strong Strong

@11 GHz -93.5 -91.5 -86 -84 -81 -78

@13 GHz -92.5 -90.5 -85 -83 -80 -77

(XMC-3W)

@13 GHz -93.5 -91.5 -86 -84 -81 -78

@15 GHz -92.5 -90.5 -85 -83 -80 -77

(XMC-3W)

@15 GHz -93.5 -91.5 -86 -84 -81 -78

@18 GHz -92 -90 -84.5 -82.5 -79.5 -76.5

(XMC-3W)

@18 GHz -93 -91 -85.5 -83.5 -80.5 -77.5

@23 GHz -92 -90 -84.5 -82.5 -79.5 -76.5

(XMC-3W)

@23 GHz -93 -91 -85.5 -83.5 -80.5 -77.5

@26 GHz -92.5 -90.5 -85 -83 -80 -77

@28 GHz -92 -90 -84.5 -82.5 -79.5 -76.5

@32 GHz -91.5 -89.5 -84 -82 -79 -76

@38 GHz -91 -89 -83.5 -81.5 -78.5 -75.5

Table 5-7 Typical receiver sensitivity of the Integrated IP microwave (IV)

Item Specifications (Channel Spacing: 14 MHz)

128QAM 256QAM 512QAM 512QAM 1024QAM 1024QAM

Light Light

RSL@BER = 10-6 (dBm)

@7 GHz -75.5 -72.5 -70.5 -69 -67 -65.5

@8 GHz -75.5 -72.5 -70.5 -69 -67 -65.5

@7 & 8 -74.5 -71.5 -69.5 -68 -66 -64.5

GHz
(XMC-3W)

@11 GHz -75 -72 -70 -68.5 -66.5 -65

@13 GHz -74 -71 -69 -67.5 -65.5 -64

(XMC-3W)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 37

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications (Channel Spacing: 14 MHz)

128QAM 256QAM 512QAM 512QAM 1024QAM 1024QAM

Light Light

@13 GHz -75 -72 -70 -68.5 -66.5 -65

@15 GHz -74 -71 -69 -67.5 -65.5 -64

(XMC-3W)

@15 GHz -75 -72 -70 -68.5 -66.5 -65

@18 GHz -73.5 -70.5 -68.5 -67 -65 -63.5

(XMC-3W)

@18 GHz -74.5 -71.5 -69.5 -68 -66 -64.5

@23 GHz -73.5 -70.5 -68.5 -67 -65 -63.5

(XMC-3W)

@23 GHz -74.5 -71.5 -69.5 -68 -66 -64.5

@26 GHz -74 -71 -69 -67.5 -65.5 -64

@28 GHz -73.5 -70.5 -68.5 -67 -65 N/A

@32 GHz -73 -70 -68 -66.5 -64.5 N/A

@38 GHz -72.5 -69.5 -67.5 -66 -64 N/A

Table 5-8 Typical receiver sensitivity of the Integrated IP microwave (V)

Item Specifications (Channel Spacing: 28 MHz)

QPSK QPSK 16QAM 16QAM 32QAM 64QAM

Strong Strong

RSL@BER = 10-6 (dBm)

@7 GHz -90.5 -89 -83.5 -82 -79 -75.5

@8 GHz -90.5 -89 -83.5 -82 -79 -75.5

@7 & 8 -89.5 -88 -82.5 -81 -78 -74.5

GHz
(XMC-3W)

@11 GHz -90 -88.5 -83 -81.5 -78.5 -75

@13 GHz -89 -87.5 -82 -80.5 -77.5 -74

(XMC-3W)

@13 GHz -90 -88.5 -83 -81.5 -78.5 -75

@15 GHz -89 -87.5 -82 -80.5 -77.5 -74

(XMC-3W)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 38

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications (Channel Spacing: 28 MHz)

QPSK QPSK 16QAM 16QAM 32QAM 64QAM

Strong Strong

@15 GHz -90 -88.5 -83 -81.5 -78.5 -75

@18 GHz -88.5 -87 -81.5 -80 -77 -73.5

(XMC-3W)

@18 GHz -89.5 -88 -82.5 -81 -78 -74.5

@23 GHz -88.5 -87 -81.5 -80 -77 -73.5

(XMC-3W)

@23 GHz -89.5 -88 -82.5 -81 -78 -74.5

@26 GHz -89 -87.5 -82 -80.5 -77.5 -74

@28 GHz -88.5 -87 -81.5 -80 -77 -73.5

@32 GHz -88 -86.5 -81 -79.5 -76.5 -73

@38 GHz -87.5 -86 -80.5 -79 -76 -72.5

Table 5-9 Typical receiver sensitivity of the Integrated IP microwave (VI)

Item Specifications (Channel Spacing: 28 MHz)

128QAM 256QAM 512QAM 512QAM 1024QA 1024QA 2048QA

Light M M Light M

RSL@BER = 10-6 (dBm)

@7 GHz -72.5 -69.5 -67.5 -66 -64 -62.5 -61

@8 GHz -72.5 -69.5 -67.5 -66 -64 -62.5 -61

@7 & 8 -71.5 -68.5 -66.5 -65 -63 -61.5 -60

GHz
(XMC-3W
)

@11 GHz -72 -69 -67 -65.5 -63.5 -62 -60.5

@13 GHz -71 -68 -66 -64.5 -62.5 -61 -59.5

(XMC-3W
)

@13 GHz -72 -69 -67 -65.5 -63.5 -62 -60.5

@15 GHz -71 -68 -66 -64.5 -62.5 -61 -59.5

(XMC-3W
)

@15 GHz -72 -69 -67 -65.5 -63.5 -62 -60.5

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 39

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications (Channel Spacing: 28 MHz)

128QAM 256QAM 512QAM 512QAM 1024QA 1024QA 2048QA

Light M M Light M

@18 GHz -70.5 -67.5 -65.5 -64 -62 -60.5 -59

(XMC-3W
)

@18 GHz -71.5 -68.5 -66.5 -65 -63 -61.5 -60

@23 GHz -70.5 -67.5 -65.5 -64 -62 -60.5 -59

(XMC-3W
)

@23 GHz -71.5 -68.5 -66.5 -65 -63 -61.5 -60

@26 GHz -71 -68 -66 -64.5 -62.5 -61 -59.5

@28 GHz -70.5 -67.5 -65.5 -64 -62 -60.5 -59

@32 GHz -70 -67 -65 -63.5 -61.5 -60 -58.5

@38 GHz -69.5 -66.5 -64.5 -63 -61 -59.5 -58

Table 5-10 Typical receiver sensitivity of the Integrated IP microwave (VII)

Item Specifications (Channel Spacing: 56 MHz)

QPSK QPSK 16QAM 16QAM 32QAM 64QAM

Strong Strong

RSL@BER = 10-6 (dBm)

@7 GHz -87.5 -86 -80.5 -79 -76 -72.5

@8 GHz -87.5 -86 -80.5 -79 -76 -72.5

@7 & 8 -86.5 -85 -79.5 -78 -75 -71.5

GHz
(XMC-3W)

@11 GHz -87 -85.5 -80 -78.5 -75.5 -72

@13 GHz -86 -84.5 -79 -77.5 -74.5 -71

(XMC-3W)

@13 GHz -87 -85.5 -80 -78.5 -75.5 -72

@15 GHz -86 -84.5 -79 -77.5 -74.5 -71

(XMC-3W)

@15 GHz -87 -85.5 -80 -78.5 -75.5 -72

@18 GHz -85.5 -84 -78.5 -77 -74 -70.5

(XMC-3W)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 40

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications (Channel Spacing: 56 MHz)

QPSK QPSK 16QAM 16QAM 32QAM 64QAM

Strong Strong

@18 GHz -86.5 -85 -79.5 -78 -75 -71.5

@23 GHz -85.5 -84 -78.5 -77 -74 -70.5

(XMC-3W)

@23 GHz -86.5 -85 -79.5 -78 -75 -71.5

@26 GHz -86 -84.5 -79 -77.5 -74.5 -71

@28 GHz -85.5 -84 -78.5 -77 -74 -70.5

@32 GHz -85 -83.5 -78 -76.5 -73.5 -70

@38 GHz -84.5 -83 -77.5 -76 -73 -69.5

Table 5-11 Typical receiver sensitivity of the Integrated IP microwave (VIII)

Item Specifications (Channel Spacing: 56 MHz)

128QAM 256QAM 512QAM 512QAM 1024QA 1024QA 2048QA

Light M M Light M

RSL@BER = 10-6 (dBm)

@7 GHz -69.5 -66.5 -64.5 -63 -61 -59.5 -58

@8 GHz -69.5 -66.5 -64.5 -63 -61 -59.5 -58

@7 & 8 -68.5 -65.5 -63.5 -62 -60 -58.5 -57

GHz
(XMC-3W
)

@11 GHz -69 -66 -64 -62.5 -60.5 -59 -57.5

@13 GHz -68 -65 -63 -61.5 -59.5 -58 -56.5

(XMC-3W
)

@13 GHz -69 -66 -64 -62.5 -60.5 -59 -57.5

@15 GHz -68 -65 -63 -61.5 -59.5 -58 -56.5

(XMC-3W
)

@15 GHz -69 -66 -64 -62.5 -60.5 -59 -57.5

@18 GHz -67.5 -64.5 -62.5 -61 -59 -57.5 -56

(XMC-3W
)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 41

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications (Channel Spacing: 56 MHz)

128QAM 256QAM 512QAM 512QAM 1024QA 1024QA 2048QA

Light M M Light M

@18 GHz -68.5 -65.5 -63.5 -62 -60 -58.5 -57

@23 GHz -67.5 -64.5 -62.5 -61 -59 -57.5 -56

(XMC-3W
)

@23 GHz -68.5 -65.5 -63.5 -62 -60 -58.5 -57

@26 GHz -68 -65 -63 -61.5 -59.5 -58 -56.5

@28 GHz -67.5 -64.5 -62.5 -61 -59 -57.5 -56

@32 GHz -67 -64 -62 -60.5 -58.5 -57 -55.5

@38 GHz -66.5 -63.5 -61.5 -60 -58 -56.5 -55

Table 5-12 Typical receiver sensitivity of the Integrated IP microwave (IX)

Item Specifications (Channel Spacing: 40 MHz)

QPSK QPSK 16QAM 16QAM 32QAM 64QAM

Strong Strong

RSL@BER = 10-6 (dBm)

@7 GHz -89 -87.5 -82 -80.5 -77.5 -74

@8 GHz -89 -87.5 -82 -80.5 -77.5 -74

@7 & 8 -88 -86.5 -81 -79.5 -76.5 -73

GHz
(XMC-3W)

@11 GHz -88.5 -87 -81.5 -80 -77 -73.5

@13 GHz -87.5 -86 -80.5 -79 -76 -72.5

(XMC-3W)

@13 GHz -88.5 -87 -81.5 -80 -77 -73.5

@15 GHz -87.5 -86 -80.5 -79 -76 -72.5

(XMC-3W)

@15 GHz -88.5 -87 -81.5 -80 -77 -73.5

@18 GHz -87 -85.5 -80 -78.5 -75.5 -72

(XMC-3W)

@18 GHz -88 -86.5 -81 -79.5 -76.5 -73

@23 GHz -87 -85.5 -80 -78.5 -75.5 -72

(XMC-3W)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 42

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications (Channel Spacing: 40 MHz)

QPSK QPSK 16QAM 16QAM 32QAM 64QAM

Strong Strong

@23 GHz -88 -86.5 -81 -79.5 -76.5 -73

@26 GHz -87.5 -86 -80.5 -79 -76 -72.5

@28 GHz -87 -85.5 -80 -78.5 -75.5 -72

@32 GHz -86.5 -85 -79.5 -78 -75 -71.5

@38 GHz -86 -84.5 -79 -77.5 -74.5 -71

Table 5-13 Typical receiver sensitivity of the Integrated IP microwave (X)

Item Specifications (Channel Spacing: 40 MHz)

128QAM 256QAM 512QAM 512QAM 1024QA 1024QA 2048QA

Light M M Light M

RSL@BER = 10-6 (dBm)

@7 GHz -71 -68 -66 -64.5 -62.5 -61 -59.5

@8 GHz -71 -68 -66 -64.5 -62.5 -61 -59.5

@7 & 8 -70 -67 -65 -63.5 -61.5 -60 -58.5

GHz
(XMC-3W
)

@11 GHz -70.5 -67.5 -65.5 -64 -62 -60.5 -59

@13 GHz -69.5 -66.5 -64.5 -63 -61 -59.5 -58

(XMC-3W
)

@13 GHz -70.5 -67.5 -65.5 -64 -62 -60.5 -59

@15 GHz -69.5 -66.5 -64.5 -63 -61 -59.5 -58

(XMC-3W
)

@15 GHz -70.5 -67.5 -65.5 -64 -62 -60.5 -59

@18 GHz -69 -66 -64 -62.5 -60.5 -59 -57.5

(XMC-3W
)

@18 GHz -70 -67 -65 -63.5 -61.5 -60 -58.5

@23 GHz -69 -66 -64 -62.5 -60.5 -59 -57.5

(XMC-3W
)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 43

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications (Channel Spacing: 40 MHz)

128QAM 256QAM 512QAM 512QAM 1024QA 1024QA 2048QA

Light M M Light M

@23 GHz -70 -67 -65 -63.5 -61.5 -60 -58.5

@26 GHz -69.5 -66.5 -64.5 -63 -61 -59.5 -58

@28 GHz -69 -66 -64 -62.5 -60.5 -59 -57.5

@32 GHz -68.5 -65.5 -63.5 -62 -60 -58.5 -57

@38 GHz -68 -65 -63 -61.5 -59.5 -58 -56.5

5.1.3 Frequency Band

The ODUs of different series and different types support a variety of operating
frequency bands.

NOTE

Frequency Range (GHz) in the following tables refers to the range of a frequency band.
For the operating frequency range that each T/R spacing supports, see RTN
ODU&Antenna&Accessory Hardware Description.

Table 5-14 Frequency band (XMC-3W ODU)

Frequency Frequency Range T/R Spacing (MHz)

Band (GHz)

7 GHz 7.093 to 7.897 154, 160, 161, 168, 196, 245

8 GHz 7.731 to 8.497 119/126, 151.614, 208, 266, 310,

311.32

13GHz 12.751 to 13.248 266

15 GHz 14.400 to 15.358 315/322, 420, 490, 644, 728

18GHz 17.685 to 19.710 1010/1008, 1092.5, 1560

23 GHz 21.200 to 23.618 1008, 1050, 1200, 1232

Table 5-15 Frequency band (XMC-3 ODU)

Frequency Frequency Range T/R Spacing (MHz)

Band (GHz)

7 GHz 7.093 to 7.897 154, 160, 161, 168, 196, 245

8 GHz 7.731 to 8.497 119/126, 151.614, 208, 266, 310,

311.32

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 44

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Frequency Frequency Range T/R Spacing (MHz)

Band (GHz)

11 GHz 10.675 to 11.745 490, 500, 520, 530

13 GHz 12.751 to 13.248 266

15 GHz 14.400 to 15.358 315/322, 420, 490, 644, 728

18 GHz 17.685 to 19.710 1010/1008, 1092.5, 1560

23 GHz 21.200 to 23.618 1008, 1050, 1200, 1232

26 GHz 24.250 to 26.453 1008

28 GHz 27.520 to 29.481 1008

32 GHz 31.815 to 33.383 812

38 GHz 37.044 to 40.105 1260

5.1.4 Transceiver Performance

Transceiver performance involves the maximum/minimum rated transmit power,
maximum rated receive power, and frequency stability.

Transceiver Specifications of the XMC-3 ODU (IS3 Mode)

Table 5-16 Rated maximum transmit power of the XMC-3 ODU

Specifications (dBm)

QPS 16Q 512

102
K/ AM/ QAM
Item 128 4Q
QPS 16Q 32Q 64Q 256 / 1024 2048
QA AM
K AM AM AM QAM 512 QAM QAM
M Lig
Stro Stro QAM
ht
ng ng Light

7 23
30 28 28 26 26 24 24 23 21
GHz

8 23
30 28 28 26 26 24 24 23 21
GHz

11 20
27 25 25 25 25 23 23 20 20
GHz

13 19
26 24 24 23 23 21 21 20 19
GHz

15 21 19
26 24 24 23 23 22 20 19
GHz

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 45

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Specifications (dBm)

QPS 16Q 512

102
K/ AM/ QAM
Item 128 4Q
QPS 16Q 32Q 64Q 256 / 1024 2048
QA AM
K AM AM AM QAM 512 QAM QAM
M Lig
Stro Stro QAM
ht
ng ng Light

18 19
25 23 23 22 22 21 21 20 19
GHz

23 20.5 18
25 23 23 22 22 20.5 19 18
GHz

26
22 21 21 19 19 17 17 15 15 15
GHz

28
23 20 20 19 19 19 19 18 17 17
GHz

32
23 20 20 19 19 19 18 17 16 16
GHz

38 13
20 18 18 17 17 16 16 14 13
GHz

Table 5-17 Rated minimum transmit power of the XMC-3 ODU

Specifications (dBm)

16QA 1024
QPSK 512Q
M/ QAM
Item / AM/
16QA 32QA 64QA 128Q 256Q / 2048
QPSK 512Q
M M M AM AM 1024 QAM
Stron AM
Stron QAM
g Light
g Light

7 GHz 5 5 5 5 5 5 5 5 5

8 GHz 5 5 5 5 5 5 5 5 5

11 –4 –4 –4 –4 –4 –4 –4 –4 –4
GHz

13 –5 –5 –5 –5 –5 –5 –5 –5 –5
GHz

15 –5 –5 –5 –5 –5 –5 –5 –5 –5
GHz

18 –7 –7 –7 –7 –7 –7 –7 –7 –7
GHz

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 46

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Specifications (dBm)

16QA 1024
QPSK 512Q
M/ QAM
Item / AM/
16QA 32QA 64QA 128Q 256Q / 2048
QPSK 512Q
M M M AM AM 1024 QAM
Stron AM
Stron QAM
g Light
g Light

23 –7 –7 –7 –7 –7 –7 –7 –7 –7
GHz

26 –10 –10 –10 –10 –10 –10 –10 –10 –10

GHz

28 –6 –6 –6 –6 –6 –6 –6 –6 –6
GHz

32 –10 –10 –10 –10 –10 –10 –10 –10 3

GHz

38 –6 –6 –6 –6 –6 –6 –6 –6 0
GHz

Table 5-18 Rated maximum receive power of the XMC-3 ODU

Specifications (dBm)

16QA 1024
QPSK 512Q
M/ QAM
Item / AM/
16QA 32QA 64QA 128Q 256Q / 2048
QPSK 512Q
M M M AM AM 1024 QAM
Stron AM
Stron QAM
g Light
g Light

7 GHz –20 –20 –20 –20 –20 –20 –25 –25 –30

8 GHz –20 –20 –20 –20 –20 –20 –25 –25 –30

11 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

13 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

15 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

18 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

23 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 47

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Specifications (dBm)

16QA 1024
QPSK 512Q
M/ QAM
Item / AM/
16QA 32QA 64QA 128Q 256Q / 2048
QPSK 512Q
M M M AM AM 1024 QAM
Stron AM
Stron QAM
g Light
g Light

26 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

28 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

32 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

38 –25 –25 –25 –25 –25 –25 –30 –30 –35

GHz

Table 5-19 Maximum ATPC range and frequency accuracy of the XMC-3 ODU
Specifications
Item Frequency Accuracy (–33°C to
Maximum ATPC Range (dB)
+55°C)

7 GHz 30 ≤ ±5 ppm
NOTE
8 GHz 30 When the T/R spacing is 311.32
MHz/151.614 MHz, the frequency
11 GHz 32 accuracy meets the ETSI
requirement.
13 GHz 34

15 GHz 34

18 GHz 35

23 GHz 35

26 GHz 32

28 GHz 33

32 GHz 33

38 GHz 30

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 48

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Transceiver Specifications of the XMC-3W ODU (IS3 Mode)

Table 5-20 Rated maximum transmit power of the XMC-3W ODU

Specifications (dBm)

16QA 1024
QPSK 512Q
M/ QAM
Item / AM/
16QA 32QA 64QA 128Q 256Q / 2048
QPSK 512Q
M M M AM AM 1024 QAM
Stron AM
Stron QAM
g Light
g Light

7 GHz 29 27 27 25 25 23 23 22 20

8 GHz 29 27 27 25 25 23 23 22 20

13
25 23 23 22 22 21 20 19 18
GHz

15
25 23 23 22 22 21 21 19 19
GHz

18
24 22 22 21 21 20 20 18 17
GHz

23
24 22 22 21 21 19.5 19.5 18 18
GHz

Table 5-21 Rated minimum transmit power of the XMC-3W ODU

Specifications (dBm)

16QA 1024
QPSK 512Q
M/ QAM
Item / AM/
16QA 32QA 64QA 128Q 256Q / 2048
QPSK 512Q
M M M AM AM 1024 QAM
Stron AM
Stron QAM
g Light
g Light

7 GHz 5 5 5 5 5 5 5 5 5

8 GHz 5 5 5 5 5 5 5 5 5

13 –5 –5 –5 –5 –5 –5 –5 –5 –5
GHz

15 –5 –5 –5 –5 –5 –5 –5 –5 –5
GHz

18 –7 –7 –7 –7 –7 –7 –7 –7 –7
GHz

23 –7 –7 –7 –7 –7 –7 –7 –7 –7
GHz

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 49

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Table 5-22 Rated maximum receive power of the XMC-3W ODU

Specifications (dBm)

16QA 1024
QPSK 512Q
M/ QAM
Item / AM/
16QA 32QA 64QA 128Q 256Q / 2048
QPSK 512Q
M M M AM AM 1024 QAM
Stron AM
Stron QAM
g Light
g Light

7 GHz –20 –20 –20 –20 –20 –20 –25 –25 –30

8 GHz –20 –20 –20 –20 –20 –20 –25 –25 –30

13 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

15 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

18 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

23 –20 –20 –20 –20 –20 –20 –25 –25 –30

GHz

Table 5-23 Maximum ATPC range and frequency accuracy of the XMC-3W ODU
Specifications
Item Frequency Accuracy (–33°C to
Maximum ATPC Range (dB)
+55°C)

7 GHz 29 ≤ ±5 ppm
NOTE
8 GHz When the T/R spacing is 311.32
MHz/151.614 MHz, the frequency
13 GHz 33 accuracy meets the ETSI
requirement.
15 GHz

18 GHz 34

23 GHz

5.2 Predicted Equipment Reliability

Equipment reliability consists of component reliability and link reliability.
Equipment reliability is measured by mean time between failures (MTBF), and
predicated equipment reliability complies with the Telcordia SR-332 standard.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 50

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

NOTE

Failures in time (FITs) are an indicator of equipment reliability in the Telcordia SR-332 standard.
Both FITs and MTBF are affected by the quality level factor, electrical stress factor, and
temperature stress factor of the component.
The calculation formula between FITs and MTBF is as follows:
● FITs = 109/MTBF (hour)
● Annual failure rate (%) = [1/MTBF (year)] x 100%

5.2.1 Predicted Component Reliability

Component reliability refers to the reliability of a single component.

Table 5-24 lists the component reliability of Integrated IP microwave with typical
configuration.

Table 5-24 Predicted component reliability

Item Specifications

IDU ODU

MTBF (hour) 51.85x104 ≥ 48.18x104

MTBF (year) 59.19 ≥ 55

MTTR (hour) 1 1

Availability 99.99981% ≥ 99.99979%

5.2.2 Predicted Link Reliability

Link reliability refers to the equipment reliability of a microwave hop, indicating
the overall reliability of components involved.

Table 5-25 lists the equipment reliability of a single Integrated IP microwave hop
with 1+0 configuration.

Table 5-25 Predicted equipment reliability of a single hop with 1+0 configuration

Item Specifications

MTBF (hour) 16.28x104

MTBF (year) 18.59

MTTR (hour) 1

Availability 99.99939%

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 51

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

5.3 Ethernet Interface Specifications

Ethernet interface specifications comply with IEEE 802.3.

GE Optical Interface Specifications

The GE optical interfaces' specifications comply with IEEE 802.3.

Table 5-26 GE optical port specifications (two-fiber bidirectional, short-distance

transmission)

Item Specifications

Classification code 1000BASE-SX (0.5 km) 1000BASE-LX (10 km)

Nominal wavelength 850 1310

(nm)

Nominal bit rate 1000

(Mbit/s)

Fiber type Multi-mode Single-mode

Transmission distance 0.5 10

(km)

Operating wavelength 770 to 860 1270 to 1355

(nm)

Average optical output -9 to -3 -9 to -3

power (dBm)

Receiver sensitivity -17 -20

(dBm)

Overload (dBm) 0 -3

Extinction ratio (dB) 9.5 9.5

Table 5-27 GE optical port specifications (two-fiber bidirectional, long-haul transmission)

Item Specifications

Classification code 1000BASE-LX (40 1000BASE-VX (40 1000BASE-ZX (80

km) km) km)

Nominal wavelength (nm) 1310 1550 1550

Nominal bit rate (Mbit/s) 1000 1000 1000

Fiber type Single-mode Single-mode Single-mode

Transmission distance (km) 40 40 80

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 52

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications

Classification code 1000BASE-LX (40 1000BASE-VX (40 1000BASE-ZX (80

km) km) km)

Operating wavelength (nm) 1270 to 1350 1480 to 1580 1500 to 1580

Average optical output power -5 to 0 -5 to 0 -2 to +5

(dBm)

Receiver sensitivity (dBm) -23 -22 -22

Overload (dBm) -3 -3 -3

Extinction ratio (dB) 9 9 9

Table 5-28 GE optical port specifications (single-fiber bidirectional)

Item Specifications

Classification code 1000BASE- 1000BASE- 1000BASE- 1000BASE-

BX-D (10 km) BX-U (10 BX-D (40 km) BX-U (40 km)
km)

Nominal wavelength (nm) Tx: 1490 Tx: 1310 Tx: 1490 Tx: 1310
Rx: 1310 Rx: 1490 Rx: 1310 Rx: 1490

Nominal bit rate (Mbit/s) 1000 1000 1000 1000

Fiber type Single-mode Single-mode Single-mode Single-mode

Transmission distance (km) 10 10 40 40

Operating wavelength (nm) Tx: 1480 to Tx: 1260 to Tx: 1480 to Tx: 1260 to
1500 1360 1500 1360
Rx: 1260 to Rx: 1480 to Rx: 1260 to Rx: 1480 to
1360 1500 1360 1500

Average optical output power -9 to -3 -9 to -3 -3 to +3 -3 to +3

(dBm)

Receiver sensitivity (dBm) -19.5 -19.5 -23 -23

Overload (dBm) -3 -3 -3 -3

Extinction ratio (dB) 6 6 6 6

NOTE

The OptiX RTN 905 s uses SFP modules to provide GE optical interfaces. Users can use different
types of SFP modules to provide GE optical interfaces with different classification codes and
transmission distances.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 53

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

GE Electrical Interface Specifications

The characteristics of GE electrical interfaces comply with IEEE 802.3.

Table 5-29 GE electrical interface specifications

Item Specifications

Nominal bit rate 10 (10BASE-T)

(Mbit/s) 100 (100BASE-TX)
1000 (1000BASE-T)

Code pattern Manchester encoding signal (10BASE-T)

MLT-3 encoding signal (100BASE-TX)
4D-PAM5 encoding signal (1000BASE-T)

Interface type RJ45

2.5GE Optical Interface Specifications

Table 5-30 2.5GE optical interface specifications (two-fiber bidirectional)

Item Specifications

BOM Code 34060365 34060517 34060528

Nominal 850 1310 1310

wavelength
(nm)

Optical fiber Multi-mode optical Single-mode optical Single-mode optical

type fiber fiber fiber

Transmission 0.3 2 10
distance
(km)

Operating 770 to 860 1261 to 1360 1261 to 1360

wavelength
(nm)

Mean –9 to –1.5 –8.4 to +0.5 –8.4 to +0.5

launched
power
(dBm)

Sensitivity –15 –13.8 –13.8

(dBm)

Overload 0 0.5 0.5

point (dBm)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 54

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications

BOM Code 34060365 34060517 34060528

Extinction 3 3.5 3.5

ratio (dB)

FE Optical Interface Specifications

The characteristics of FE optical interfaces comply with IEEE 802.3.

Table 5-31 FE optical port specifications (two-fiber bidirectional)

Item Specifications

Classification code 100BASE-FX 100BASE-LX 100BASE-VX 100BASE-ZX

(2 km) (15 km) (40 km) (80 km)

Nominal wavelength (nm) 1310 1310 1310 1550

Nominal bit rate (Mbit/s) 100 100 100 100

Fiber type Multi-mode Single-mode Single-mode Single-mode

Transmission distance (km) 2 15 40 80

Operating wavelength (nm) 1270 to 1380 1261 to 1360 1263 to 1360 1480 to 1580

Average optical output power -19 to -14 -15 to -8 -5 to 0 -5 to 0

(dBm)

Receiver sensitivity (dBm) -30 -28 -34 -34

Overload (dBm) -14 -8 -10 -10

Extinction ratio (dB) 10 8.2 10 10.5

Table 5-32 FE optical port specifications (single-fiber bidirectional)

Item Specifications

Classification code 100BASE-BX- 100BASE-BX- 100BASE-BX- 100BASE-BX-

D (15 km) U (15 km) D (40 km) U (40 km)

Nominal wavelength (nm) Tx: 1550 Tx: 1310 Tx: 1550 Tx: 1310
Rx: 1310 Rx: 1550 Rx: 1310 Rx: 1550

Nominal bit rate (Mbit/s) 100 100 100 100

Fiber type Single-mode Single-mode Single-mode Single-mode

Transmission distance (km) 15 15 40 40

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 55

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications

Classification code 100BASE-BX- 100BASE-BX- 100BASE-BX- 100BASE-BX-

D (15 km) U (15 km) D (40 km) U (40 km)

Operating wavelength (nm) Tx: 1480 to Tx: 1260 to Tx: 1480 to Tx: 1260 to
1580 1360 1580 1360
Rx: 1260 to Rx: 1480 to Rx: 1260 to Rx: 1480 to
1360 1580 1360 1580

Average optical output power -15 to -8 -15 to -8 -5 to 0 -5 to 0

(dBm)

Receiver sensitivity (dBm) -32 -32 -32 -32

Overload (dBm) -8 -8 -10 -10

Extinction ratio (dB) 8.5 8.5 10 10

NOTE

The OptiX RTN 905 s uses SFP modules to provide FE optical interfaces. Users can use different
types of SFP modules to provide FE optical interfaces with different classification codes and
transmission distances.

5.4 Equipment Performance

This section describes equipment performance in terms of dimensions, weight,
power consumption, power supply, EMC, surge protection, safety, and
environment.

Dimensions

Table 5-33 Dimensions

Component Dimensions (W x D x H)

IDU 442 mm x 220 mm x 44 mm

ODU XMC-3: ≤ 195 mm x 43.5 mm x 195 mm

XMC-3W: ≤ 195 mm x 70 mm x 195 mm

Weight

Table 5-34 Typical weight

Component Typical Weight

IDU 2.52 kg

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 56

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Component Typical Weight

ODU XMC-3: ≤ 2.8 kg

XMC-3W: ≤ 3.8 kg

Power Consumption

Table 5-35 Typical component power consumption

Service Port and RF Configuration Typical Power

Consumption

IDU 25.3 W

ODU ≤ 24.5 W

Table 5-36 Typical link power consumption

Link Type Service Port and RF Configuration Typical Power

Consumption
(IDU+ODU)

Integrated IP 6xGE, 1+0 configuration 48 W

microwave (1xIDU 905 s+1xXMC-3 ODU)

Power Supply

Table 5-37 Power supply

Component Specifications

IDU ● Compliant with ETSI EN300 132-2

● One –48 V (–38.4 V to –57.6 V) DC power input

ODU ● Compliant with ETSI EN300 132-2

● One –48 V DC power input from the IDU

Electromagnetic Compatibility
● CE certified
● Compliant with ETSI EN 301 489-1
● Compliant with ETSI EN 301 489-4
● Compliant with CISPR 32

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 57

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

● Compliant with EN 55032

● Compliant with EN 55024
● Compliant with CISPR 24
● Compliant with VCCI V-3
● Compliant with ICES-003 Issue 6
● Compliant with AS/NZS CISPR 32
● Compliant with IEC 61000-6-2/EN 61000-6-2
● Compliant with IEC 61000-6-4/EN 61000-6-4

Lightning Protection
● Compliant with IEC 61000-4-5
● Compliant with ITU-T K.20
● Compliant with ITU-T K.44

Safety
● CE certified
● Compliant with ETSI EN 60215
● Compliant with ETSI EN 60950
● Compliant with UL 60950
● Compliant with IEC 60825
● Compliant with GB 4943

Environment
The IDU operation requires controllable temperature and weather protection. The
ODU is used outdoors.

Table 5-38 Environment performance

Item Specifications

IDU ODU

Major Operation Compliant with ETSI EN Compliant with ETSI EN

reference 300 019-1-3 class 3.2 300 019-1-4 class 4.1
standards
Transportat Compliant with ETSI EN 300 019-1-2 class 2.3
ion

Storage Compliant with ETSI EN Compliant with ETSI EN

300 019-1-1 class 1.2 300 019-1-1 class 1.2
NOTE
The storage validity period
for the ODU is one year.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 58

OptiX RTN 905 s Radio Transport System
Product Description 5 Technical Specifications

Item Specifications

IDU ODU

Temperatur Operation Long-term: –5°C to –33°C to +55°C

e +60°C
Short-term: –20°C to
+65°C

Transportat –40°C to +70°C –40°C to +70°C

ion and
storage

Relative humidity 5% to 95% 5% to 100%

Noise < 7.2 bels, compliant -

with ETSI EN 300 753
class 3.2 attended

Earthquake Compliant with Bellcore GR-63-CORE ZONE 4

Mechanical stress Compliant with ETSI EN 300 019

Dustproof and IP20 IP65 (XMC-3W ODU)

waterproof IP66 (XMC-3 ODU)

Anti-explosive - Ex nA IIB T4 (XMC-3

ODU)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 59

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

6 Accessories

This chapter describes the accessories that are optionally used for the RTN 905 s,
including the E1 panel, USB flash drive, and power distribution unit (PDU).

6.1 Power Adapter

The power adapter converts AC power into DC power and supplies it to the RTN
905 s.
6.2 SSC6PDU
An SSC6PDU is installed on the top of a 19-inch cabinet to distribute the input
power supply to devices in the cabinet.
6.3 DPD80-2-8 PDU
The DPD80-2-8 PDU is a new type of PDU that can be installed on the top of a
19-inch cabinet or an ETSI cabinet and distributes power to devices in the cabinet.

6.1 Power Adapter

The power adapter converts AC power into DC power and supplies it to the RTN
905 s.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 60

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

Front Panel

Figure 6-1 Appearance of a power adapter

Functions and Features

Table 6-1 Functions and features

Function and Description
Feature

Basic function Converts the 220 V AC input power into stable –56 V DC
output power.

Placement mode Desktop

Power AC Wide input voltage range (90–290 V AC)

system power
configur
ation DC 54–57 V DC (default output: 56 V DC)
power

Protecti Input Supported

on undervo
ltage
protecti
on

Input Supported
overcurr
ent
protecti
on

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 61

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

Function and Description

Feature

Output Hiccup-mode protection

overvolt
age
protecti
on

Output Hiccup-mode protection, with protection threshold at

overcurr 120%–160%. Services can be automatically restored after
ent such a fault is rectified.
protecti
on

Output Hiccup-mode protection pursuant to IEC 62368 (ES1).

short- Services can be automatically restored after such a fault is
circuit rectified.
protecti
on

Overte Supported
mperatu
re
protecti
on

Power Cable
The AC input power cable is used by the AC power supply device to supply AC
power to the AC power adapter. The DC output power cable is used by the power
adapter to output DC power to the RTN 905 s.

Table 6-2 Power cable specifications

AC Input Power DC Output Power Terminal (on Terminal
Cable Cable the AC Power (on the RTN
Supply Device 905 s Side)
Side)

External Cable Suite, 18 AWG, UL2464 C8 AC socket DC semi-

Power Cords All Over cable + magnetic ring, insulated
The World, Class II 1.5 m long, PVC connector
Equipment with material, meeting the
Connector C7, HS VW-1 flame spread
rating

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 62

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

NOTE

The DC power cable terminal delivered with the power adapter cannot be directly used on
the RTN 905 s. The DC power cable terminal applicable to the RTN 905 s has the following
specifications: 4-pin and top screw/horizontal lead wire (as shown in Figure 6-2). Therefore,
the power cable must be re-assembled onsite. For details, see RTN 905 s IDU Quick
Installation Guide.

Figure 6-2 DC power cable terminal applicable to the RTN 905 s

Technical Specifications

Table 6-3 Technical specifications

Item Specifications

AC input Input voltage 90–290 V AC (typical voltage: 110/220 V AC)

Input frequency 47–63 Hz (typical frequency: 50/60 Hz)

Maximum input 2A
current

Power input Single-phase input

mode

No-load power ≤ 0.15 W

consumption

DC output Output voltage 54–57 V DC (typical voltage: 56 V DC)

Rated output 2.68 A

current

Output power 150 W

Output ≥ 89%
efficiency

Regulated ≤ ±2.7%
voltage precision

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 63

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

Item Specifications

Output ripple ● ≤ 500 mV (when the input voltage is 90–

and noise 264 V AC)
● ≤ 1000 mV (when the input voltage is
265–290 V AC)

Protection Input ≤ 85 V AC
undervoltage
protection
threshold

Input ≤ 90 V AC
undervoltage
recovery
threshold

Output ≤ 57.5–60 V DC
overvoltage
protection
threshold

Output ≤ 3.25–4.35 A
overcurrent
protection
threshold

Ambient Operating –5 to +45°C (typical temperature: 25°C)

temperature temperature

Storage –40 to 70°C (typical temperature: 25°C)

temperature

Relative humidity 5% to 95%

Altitude ≤ 5000
NOTE
● When the altitude is below 1800 m, the
ambient temperature does not change.
● When the altitude is above 1800 m, the
ambient temperature drops by 1°C for every
220 m increment in altitude.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 64

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

Item Specifications

Heat dissipation Natural heat dissipation

NOTE
● Rated area: With full-load rated input and
output, the temperature of the power adapter
shell must be less than 70°C at the normal
ambient temperature of 25°C.
● Area I: With full-load rated input and output,
the temperature of the power adapter shell
must be less than 90°C at a high ambient
temperature.
● Exceptions (area II conditions such as overload
and short circuit): The temperature of the
power adapter shell must be less than 95°C.

Environment protection Compliant with RoHS 2.0 EU 2015/863

Power adapter dimensions (H x 44 mm x 80 mm x 180 mm

W x D)

Power adapter weight 0.75 kg

6.2 SSC6PDU
An SSC6PDU is installed on the top of a 19-inch cabinet to distribute the input
power supply to devices in the cabinet.

6.2.1 Front Panel

There are power input terminals, PGND terminals, power distribution terminals,
and power distribution switches on the front panel of an SSC6PDU.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 65

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

Front Panel Diagram

Figure 6-3 Front panel of an SSC6PDU

1. Power wiring terminals (A) 2. PGND terminals

3. Power input terminals 4. Power wiring terminals (B)

5. Power switches (A) 6. Power switches (B)

Ports

Table 6-4 Ports on the SSC6PDU

Position Port Description

Power + Power output (+)

wiring
terminals - Power output (-)
(A)

PGND Wiring terminal for a two-hole OT terminal, for

terminals connecting PGND cables

Power input RTN1(+) First power input (+)

terminals
RTN2(+) Second power input (+)

NEG1(-) First power input (-)

NEG2(-) Second power input (-)

Power + Power output (+)

wiring
terminals - Power output (-)
(B)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 66

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

Position Port Description

Power 20A They are switches for the power outputs. The
switches (A) fuse capacity is 20 A. The switches from the left
to the right correspond to output power
terminals 1–4 on the A side.

Power 20A They are switches for the power outputs. The
switches (B) fuse capacity is 20 A. The switches from the left
to the right correspond to output power
terminals 1–4 on the B side.

6.2.2 Functions and Working Principles

An SCC6PDU provides simple power distribution, distributing power to devices in
the cabinet.

Functions
● Supports two –48 V/–60 V DC power inputs.
● Allows each power input to provide four power outputs.
● Supports a 20 A fuse capacity for each power output switch.
● Supports DC-C or DC-I power distribution.

Working Principles
The SSC6PDU mainly consists of input terminals, output terminals, and air circuit
breakers. The PDU supports the simple power distribution function for the input
power.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 67

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

Figure 6-4 Functional block diagram of the SSC6PDU

6.2.3 Power Distribution Mode

An SSC6PDU supports DC-C and DC-I power distribution.
A short-circuit copper bar inside an SSC6PDU controls the power distribution
mode of the SSC6PDU.

DC-C Power Distribution Mode

To use DC-C power distribution, use the short-circuit copper bar to short-circuit
terminal RTN1(+), terminal RTN2(+), and PGND terminals.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 68

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

Figure 6-5 Interior of an SSC6PDU in DC-C mode

DC-I Power Distribution Mode

To use DC-I power distribution, remove the short-circuit copper bar.

Figure 6-6 Interior of an SSC6PDU in DC-I mode

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 69

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

6.3 DPD80-2-8 PDU

The DPD80-2-8 PDU is a new type of PDU that can be installed on the top of a
19-inch cabinet or an ETSI cabinet and distributes power to devices in the cabinet.

6.3.1 Front Panel and Internal Structure

The DPD80-2-8 PDU has two areas (area A and area B; each providing four power
switches) on its front panel and all cable ports inside it.

Front Panel
Figure 6-7 shows a universal PDU (DPD63-8-8 PDU). Different types of short-
circuit copper bars are used to match different types of power current supplied by
the power supply equipment in the equipment room. The DPD80-2-8 PDU is a 2-
input and 8-output PDU developed based on the DPD63-8-8 PDU.
On the front panel, area A and area B each receives one –48 V/–60 V power input
and provides four power outputs to subracks inside the cabinet.

Figure 6-7 Front panel of a DPD80-2-8 PDU

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 70

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

Internal Structure
The DPD80-2-8 PDU provides power input and output ports for connecting input
and output power cables. See Figure 6-8.

Figure 6-8 Internal structure of the DPD80-2-8 PDU

● Power output area: On either side of the DPD80-2-8 PDU, there are four
output terminal blocks that are used to connect the power cables of subracks.
● Power input area: INPUT A and INPUT B are each connected to one –48 V DC
power cable and one power ground cable, that is, two –48 V DC power cables
and two power PGND cables in total.
● Power switch area: On both sides of the DPD80-2-8 PDU, there are
respectively four power output switches controlling the corresponding power
output terminal blocks. The power output switches control power supply to
the corresponding subracks.

6.3.2 Functions and Working Principles

The DPD80-2-8 PDU realizes the simple power distribution function. The PDU
distributes the input power to the equipment in a cabinet.

Functions
● Supports two –48 V/–60 V DC power inputs.
● Allows each power input to provide four power outputs.
● Supports a 20 A fuse capacity for each power output switch.

Working Principles
The PDU mainly consists of input terminals, output terminals, and air circuit
breakers. The PDU supports the simple power distribution function for the input
power.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 71

OptiX RTN 905 s Radio Transport System
Product Description 6 Accessories

Figure 6-9 Functional block diagram of the DPD80-2-8 PDU

6.3.3 Power Distribution Mode

The DPD80-2-8 PDU supports the DC-I power distribution mode.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 72

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

7 Cables

This chapter describes the purpose, appearance, and pin assignments of various
cables used on the IDU 905 s.

7.1 Power Cable

A power cable connects the power supply port on the IDU to a power supply
device (for example, a PDU on top of the cabinet) for access of the –48 V power
to the IDU.
7.2 IDU PGND Cable
An IDU PGND cable connects the left ground point of the IDU to the ground point
of external equipment (for example, the ground support of a cabinet) so that the
IDU and external equipment share the same ground.
7.3 IF Cable
The IF cable connects the ODU and IDU. The IF cable is used to transport IF
signals, O&M signals, and –48 V power between the ODU and the IDU.
7.4 IF Jumper
An IF jumper connects the IDU to an IF cable. The IF jumper works with the IF
cable to transmit IF signals and O&M signals in addition to supplying –48 V power
between the ODU and the IDU.
7.5 Fiber Jumper
A fiber jumper transmits optical signals. One end of the fiber jumper has an LC/PC
connector that is connected to FE/GE optical port on the OptiX RTN 905 s. The
connector at the other end of the fiber jumper depends on the type of the optical
port on the equipment to be connected.
7.6 Network Cable
A network cable connects two pieces of Ethernet equipment. Both ends of the
network cable are terminated with an RJ45 connector.

7.1 Power Cable

A power cable connects the power supply port on the IDU to a power supply
device (for example, a PDU on top of the cabinet) for access of the –48 V power
to the IDU.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 73

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

NOTE

If an OptiX RTN 905 s uses an AC power box, the load power cable delivered with the AC
power box must be used. See 6.1 Power Adapter.

Cable Diagram

Figure 7-1 Power cable

Table 7-1 Power cable specifications

Model Cable Specifications Terminal Specifications

2.5 mm2 Power cable, 450 V/750 V, H07Z- Common terminal, single
power cable K-2.5 mm2, blue/black, low cord end terminal,
and terminal smoke zero halogen cable conductor cross section 2.5
mm2, 12.5 A, insertion
depth 8 mm

NOTE

For the OptiX RTN 905 s, power cables with a 2.5 mm2 cross-sectional area can extend for a
maximum distance of 50 m.

7.2 IDU PGND Cable

An IDU PGND cable connects the left ground point of the IDU to the ground point
of external equipment (for example, the ground support of a cabinet) so that the
IDU and external equipment share the same ground.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 74

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

Cable Diagram

Figure 7-2 IDU PGND cable

1. Bare crimping terminal, OT 2. Bare crimping terminal, OT

Pin Assignments
None

7.3 IF Cable
The IF cable connects the ODU and IDU. The IF cable is used to transport IF
signals, O&M signals, and –48 V power between the ODU and the IDU.

IF cables fall into 5D cable, RG-8U cable, and 1/2-inch cable.

Table 7-2 Types of IF cables

Type Applicable Connector IF Jumper

Distance Required
(Distance ODU Side IDU Side
Between an
IDU and an
ODU)

5D cable < 120 m Type N, male Type TNC, Not required

connector male
connector

RG-8U cable 120 m to 180 Type N, male Type N, male Required

m connector connector

1/2-inch cable 180 m to 300 Type N, male Type N, male Required

m connector connector

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 75

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

NOTE

A 5D cable connects the IF interface of an ODU to the IF interface of an IDU. An RG-8U cable or
1/2-inch cable connects the IF port of an ODU to the IF jumper of an IDU.

Cable Diagram

Figure 7-3 IF cable

1. RF coaxial cable connector, type-N, 2. RF Coaxial Connector, type TNC,

male male

Pin Assignment
None

Technical Specifications

Table 7-3 Technical specifications of the IF cable

Item Performance

5D Cable RG-8U Cable 1/2-Inch Cable

Characteristic 50 50 50
impedance (ohm)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 76

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

Item Performance

5D Cable RG-8U Cable 1/2-Inch Cable

Attenuation ≤ 10.0 (140 MHz) ≤ 6.0 (140 MHz) ≤ 5.0 (140 MHz)
(dB/100 m) ≤ 15.0 (350 MHz) ≤ 9.0 (350 MHz) ≤ 7.8 (350 MHz)

DC resistance ≤ 11.0 ≤ 4.9 ≤ 4.3

(ohm/km at 20°C)

Cable diameter 7.60 10.16 13.40

(mm)

7.4 IF Jumper
An IF jumper connects the IDU to an IF cable. The IF jumper works with the IF
cable to transmit IF signals and O&M signals in addition to supplying –48 V power
between the ODU and the IDU.

An IF jumper is a 2 m RG-223 cable. One end of an IF jumper is terminated with a

type-N connector and is connected to an IF cable. The other end of the IF jumper
is terminated with a TNC connector and is connected to an IF board.

NOTE

● If a 5D IF cable is used, you can connect the cable directly to an IF board instead of
using an IF jumper.
● If an RG-8U or 1/2-inch IF cable is used, an IF jumper is required to connect the RG-8U
or 1/2-inch IF cable to the IF board.

Cable Diagram

Figure 7-4 IF jumper

1. RF coaxial cable connector, TNC, male 2. RF coaxial cable connector, Type N, female

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 77

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

Pin Assignments
None

7.5 Fiber Jumper

A fiber jumper transmits optical signals. One end of the fiber jumper has an LC/PC
connector that is connected to FE/GE optical port on the OptiX RTN 905 s. The
connector at the other end of the fiber jumper depends on the type of the optical
port on the equipment to be connected.

Types of Fiber Jumpers

Table 7-4 Types of fiber jumpers

Connector 1 Connector 2 Cable

LC/PC FC/PC 2 mm single-mode fiber

2 mm multi-mode fiber

LC/PC SC/PC 2 mm single-mode fiber

2 mm multi-mode fiber

LC/PC LC/PC 2 mm single-mode fiber

2 mm multi-mode fiber

NOTE

For the OptiX RTN 905 s, multi-mode fibers are required to connect to the GE optical ports of
the 1000BASE-SX.

Fiber Connectors
The following figures show three common types of fiber connectors, namely,
LC/PC connector, SC/PC connector, and FC/PC connector.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 78

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

Figure 7-5 LC/PC connector

Figure 7-6 SC/PC connector

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 79

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

Figure 7-7 FC/PC connector

7.6 Network Cable

A network cable connects two pieces of Ethernet equipment. Both ends of the
network cable are terminated with an RJ45 connector.

Two types of interfaces use RJ45 connectors, which are medium dependent
interfaces (MDIs) and MDI-Xs. MDIs are used by terminal equipment, for example,
network card. The pin assignments for MDIs are provided in Table 7-5. MDI-Xs are
used by network equipment. The pin assignments for MDI-Xs are provided in
Table 7-6.

Table 7-5 Pin assignments for MDIs

Pin 10/100BASE-T(X) 1000BASE-T

Signal Function Signal Function

1 TX+ Transmitting data (+) BIDA+ Bidirectional data

wire A (+)

2 TX- Transmitting data (-) BIDA- Bidirectional data

wire A (-)

3 RX+ Receiving data (+) BIDB+ Bidirectional data

wire B (+)

4 Reserved - BIDC+ Bidirectional data

wire C (+)

5 Reserved - BIDC- Bidirectional data

wire C (-)

6 RX- Receiving data (-) BIDB- Bidirectional data

wire B (-)

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 80

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

Pin 10/100BASE-T(X) 1000BASE-T

Signal Function Signal Function

7 Reserved - BIDD+ Bidirectional data

wire D (+)

8 Reserved - BIDD- Bidirectional data

wire D (-)

Table 7-6 Pin assignments for MDI-Xs

Pin 10/100BASE-T(X) 1000BASE-T

Signal Function Signal Function

1 RX+ Receiving data (+) BIDB+ Bidirectional data

wire B (+)

2 RX- Receiving data (-) BIDB- Bidirectional data

wire B (-)

3 TX+ Transmitting data (+) BIDA+ Bidirectional data

wire A (+)

4 Reserved - BIDD+ Bidirectional data

wire D (+)

5 Reserved - BIDD- Bidirectional data

wire D (-)

6 TX- Transmitting data (-) BIDA- Bidirectional data

wire A (-)

7 Reserved - BIDC+ Bidirectional data

wire C (+)

8 Reserved - BIDC- Bidirectional data

wire C (-)

Straight-through cables are used between MDIs and MDI-Xs, and crossover cables
are used between MDIs or between MDI-Xs. The only difference between straight-
through cables and crossover cables is with regard to the pin assignment.
The NMS ports and Ethernet electrical service ports of the OptiX RTN 905 s
support the MDI and auto-MDI/MDI-X modes. Straight-through cables and
crossover cables can be used to connect these ports to MDIs or MDI-Xs.

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 81

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

Cable Diagram

Figure 7-8 Network cable

1. Network port connector, RJ45

Pin Assignments

Table 7-7 Pin assignments for the straight-through cable

Connector X1 Connector X2 Color Relationship

X1.1 X2.1 White/Orange Twisted pair

X1.2 X2.2 Orange

X1.3 X2.3 White/Green Twisted pair

X1.6 X2.6 Green

X1.4 X2.4 Blue Twisted pair

X1.5 X2.5 White/Blue

X1.7 X2.7 White/Brown Twisted pair

X1.8 X2.8 Brown

Table 7-8 Pin assignments for the crossover cable

Connector X1 Connector X2 Color Relationship

X1.1 X2.3 White/Green Twisted pair

X1.2 X2.6 Green

X1.3 X2.1 White/Orange Twisted pair

X1.6 X2.2 Orange

X1.4 X2.4 Blue Twisted pair

X1.5 X2.5 White/Blue

X1.7 X2.7 White/Brown Twisted pair

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 82

OptiX RTN 905 s Radio Transport System
Product Description 7 Cables

Connector X1 Connector X2 Color Relationship

X1.8 X2.8 Brown

Issue 02 (2021-03-30) Copyright © Huawei Technologies Co., Ltd. 83