EAV64332 V3.

6 ATV600 - Communication Pa
/!\ WARNING
UNEXPECTED MOVEMENT

Drive systems may perform unexpected movements because of incorrect wiring, incorrect settings, incorrect data or other errors.
• Only appropriately trained persons who are familiar with and understand the contents of all pertinent product documentation and who ha
recognize and avoid hazards involved are authorized to work on and with this drive system. Installation, adjustment, repair and maintenan
personnel.
• Carefully install the wiring in accordance with the EMC requirements.
• Do not operate the product with unknown or unsuitable settings or data.
• Perform a comprehensive commissioning test.

Failure to follow these instructions can result in death, serious injury, or equipment damage.

/!\ WARNING
LOSS OF CONTROL

• The designer of any control scheme must consider the potential failure modes of control paths and, for critical control functions, provide
during and after a path failure. Examples of critical control functions are emergency stop, overtravel stop, power outage and restart.
• Separate or redundant control paths must be provided for critical control functions.
• System control paths may include communication links. Consideration must be given to the implications of unanticipated transmission d
• Observe all accident prevention regulations and local safety guidelines (1).
• Each implementation of the product must be individually and thoroughly tested for proper operation before being placed into service.

Failure to follow these instructions can result in death, serious injury, or equipment damage.
Note a.: For additional information, refer to NEMA ICS 1.1 (latest edition), “Safety Guidelines for the Application, Installation, and Maintenance of Solid State
edition), “Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable-Speed Drive Systems.”

Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by
consequences arising out of the use of this material.
EXPLANATORY NOTE
This Excel file is for reference only. Refer to programming manual and communication protocols manuals for full information.
This Excel file can be used to carry out searches (example: parameter address and format) and sort operations.

The columns include the following criteria:

Code:
Language-independent, this allows a rapid search in the programming manual, which includes an index of parameter codes.
Additional information can be found in the Communication Manuals (Modbus, CANopen....etc.....)

Name:
Parameter designation

Logic address:
Addresses for Modbus, Profibus, Profinet and Ethernet TCP
Address for the messaging are in decimal and hexadecimal (preceded by 16#) format.
To optimize messaging performance, two addresses are given for the control word (CMD) and the status word (ETA).
The addresses annotated "speed" are for use in rpm; the addresses annotated "frequency" are for use in Hz.

CANopen index:
Addresses for CANopen, PowerLink and EtherCAT.
CANopen index/subindex in hexadecimal format, to be used for variable assignment of PDOs and SDO messaging.

DeviceNet path:
Address for DeviceNet and Ethernet IP.

# Internal
Class/instance/attribute in decimal and hexadecimal (preceded by 16#) format.
When two paths are given, for example:
- 16#29/01/0D = 41/1/13 (messaging): ODVA standard path. It can be used for explicit messaging. Do not use it for configuring an assem
- 16#8C/01/07 = 140/1/7 (assembly): Altivar-specific path. This is the path that must be used for configuring an assembly. Avoid using it fo
interchangeability.

Link:
- For WORD (listing), a dynamic link opens its description. Listings are common to several parameters; only one part is valid for a given p
manual to determine the valid values. If an invalid value is written to a configuration parameter, the drive will indicate a fault [Invalid config
- For WORD (bit register), in the Type column, a dynamic link opens its description.

Category:
Defines the role of the parameter, for example: Command parameter, Status parameter, etc.

Access:
Read and write options:
R: Read only
R/W: Read and write
R/WS: Read and write (write only possible when the drive is not in RUN mode).
It is not possible to write these parameters in "5-Operation enabled" or "6-Quick stop active" states.
If the parameter is written in the "4-Switched on" state, transition 10 to "2-Switch on disabled" is activated.

Type:
WORD (bit register): Word where each bit represents a command or a state
WORD (listing): Word where each value represents a possible choice for a configuration or state
INT: Signed integer
UINT: Unsigned integer
DINT: Signed double integer
UDINT: Unsigned double integer

Units:
Physical unit and multiplier.

Factory setting:
Value of the parameter set at the factory.

Menu:
Indicates the menus or menus where the parameter is located. Menu name displayed on the graphic display terminal, in square brackets
7-segment digits on the integrated display terminal, in round brackets (---).

Range:
Possible values.

Display:
Parameter name displayed on the graphic display terminal, in square brackets [---], and parameter code displayed by the 7-segment digit
round brackets (---).

Menu:
Indicates the menus or menus where the parameter is located. Menu name displayed on the graphic display terminal, in square brackets
7-segment digits on the integrated display terminal, in round brackets (---).

# Internal
Order:
Gives the initial storage order of the parameter in the file, from 1 to n. This makes it possible, after sorting operations, to put this file back
in ascending order.

# Internal
mmunication Parameters
G

incorrect data or other errors.

ent product documentation and who have received safety training to
tion, adjustment, repair and maintenance must be performed by qualified

d, for critical control functions, provide a means to achieve a safe state

l stop, power outage and restart.

ations of unanticipated transmission delays or failures of the link.

on before being placed into service.

.
Installation, and Maintenance of Solid State Control” and to NEMA ICS 7.1 (latest
eed Drive Systems.”

onnel. No responsibility is assumed by Schneider Electric for any

anuals for full information.

rt operations.

ndex of parameter codes.

status word (ETA).

use in Hz.

SDO messaging.

# Internal
Do not use it for configuring an assembly.
nfiguring an assembly. Avoid using it for explicit messaging, to ensure better

ters; only one part is valid for a given parameter. Refer to programming
drive will indicate a fault [Invalid config.] (CFI).

" is activated.

ic display terminal, in square brackets [---], and menu code displayed by the

code displayed by the 7-segment digits on the integrated display terminal, in

ic display terminal, in square brackets [---], and menu code displayed by the

# Internal
sorting operations, to put this file back in its initial order by sorting the column

# Internal
Code Name Logic address CANopen index
CMI Extended control word 16#2138 = 8504 16#2037/5
CMD Command register 16#2135 = 8501 16#2037/2
RPR Counter reset 16#0C30 = 3120 16#2001/15

LFRD Speed setpoint 16#219A = 8602 16#2038/3

LFR Reference frequency 16#2136 = 8502 16#2037/3
PISP PIDSet point 16#2137 = 8503 16#2037/4
AIV1 AIV1 Image input 16#14A1 = 5281 16#2016/52
MFR Multiplying coefficient 16#2E37 = 11831 16#2058/20

ETA Status Register 16#0C81 = 3201 16#2002/2

HMIS Device state 16#0CA8 = 3240 16#2002/29

ETI Internal State register 16#0C86 = 3206 16#2002/7

CRC Channel for reference frequency 16#20F9 = 8441 16#2036/2A
CCC Active command channel 16#20FA = 8442 16#2036/2B
CNFS Active configuration 16#1F54 = 8020 16#2032/15
STUN Tune selection 16#2591 = 9617 16#2042/12

SMOT Status of motor tune in term of saliency 16#25AD = 9645 16#2042/2E

RFRD Output velocity 16#219C = 8604 16#2038/5
RFR Motor frequency 16#0C82 = 3202 16#2002/3
OTR Motor torque 16#0C85 = 3205 16#2002/6
LCR Motor current 16#0C84 = 3204 16#2002/5

UOP Motor voltage 16#0C88 = 3208 16#2002/9

OPR Motor power 16#0C8B = 3211 16#2002/C
FRHD Speed reference before ramp 16#219D = 8605 16#2038/6
FROD Speed reference after ramp 16#21C1 = 8641 16#2038/2A
FRH Reference frequency before ramp 16#0C83 = 3203 16#2002/4

FRO Frequency reference after ramp 16#233D = 9021 16#203C/16

RPC PID reference 16#2ECE = 11982 16#2059/53

RPF PID feedback 16#2ECD = 11981 16#2059/52

RPE PID error 16#2ECC = 11980 16#2059/51

RPO PID output 16#2ECF = 11983 16#2059/54
ULN Mains voltage 16#0C87 = 3207 16#2002/8
THD Drive thermal state 16#0C89 = 3209 16#2002/A
THR Motor thermal state 16#259E = 9630 16#2042/1F

RTH Motor run time 16#0CAC = 3244 16#2002/2D

PTH Power-on time 16#0CAE = 3246 16#2002/2F
IL1R Logic inputs states 16#1452 = 5202 16#2016/3
OL1R Logic outputs states 16#145C = 5212 16#2016/D
AI1C Physical value AI1 16#147A = 5242 16#2016/2B
AI1R Analog input 1 standardized value 16#1470 = 5232 16#2016/21
AI2C Physical value AI2 16#147B = 5243 16#2016/2C
AI2R Analog input 2 standardized value 16#1471 = 5233 16#2016/22

# Internal
AI3C Physical value AI3 16#147C = 5244 16#2016/2D
AI3R Analog input 3 standardized value 16#1472 = 5234 16#2016/23
AO1C AQ1 physical value 16#1497 = 5271 16#2016/48
AO1R Analog output 1 standardized value 16#148D = 5261 16#2016/3E
ERRD CiA402 fault code 16#219E = 8606 16#2038/7
LFT Last error occurred 16#1BD1 = 7121 16#2029/16
CIC Incorrect configuration 16#1BDA = 7130 16#2029/1F
CNF Fieldbus module Communication interruption 16#1BDC = 7132 16#2029/21

ILF1 Internal communication interruption 1 16#1BDE = 7134 16#2029/23

FNB Fault counter 16#1CE1 = 7393 16#202B/5E

DP0 Fault code on last fault 16#1C20 = 7200 16#202A/1
ULP0 DC bus voltage 16#1C66 = 7270 16#202A/47
LCP0 Motor current 16#1C48 = 7240 16#202A/29
RFP0 Output frequency 16#1C52 = 7250 16#202A/33
THP0 Motor thermal state 16#1C70 = 7280 16#202A/51
EP0 State word 16#1C2A = 7210 16#202A/B
IP0 ETI state word 16#1C34 = 7220 16#202A/15
CMP0 Cmd word 16#1C3E = 7230 16#202A/1F
DCC0 Command channel 16#FB2C = 64300
DRC0 Channel for reference frequency 16#FB36 = 64310
CRP0 Channels active on last fault 16#1C7A = 7290 16#202A/5B
RTP0 Run Elapsed time 16#1C5C = 7260 16#202A/3D
OTP0 Motor torque 16#1CA2 = 7330 16#202B/1F
TDP0 Drive thermal state 16#1CAC = 7340 16#202B/29
TJP0 IGBT junction temp 16#1CB6 = 7350 16#202B/33
SFP0 Switching frequency 16#1CC0 = 7360 16#202B/3D
DP1 Fault code on fault n-1 16#1C21 = 7201 16#202A/2
ULP1 DC bus voltage 16#1C67 = 7271 16#202A/48
LCP1 Motor current 16#1C49 = 7241 16#202A/2A
RFP1 Output frequency 16#1C53 = 7251 16#202A/34
THP1 Motor thermal state 16#1C71 = 7281 16#202A/52
EP1 Status of last error 1 16#1C2B = 7211 16#202A/C
IP1 ETI state word 16#1C35 = 7221 16#202A/16
CMP1 Cmd word 16#1C3F = 7231 16#202A/20
DCC1 Command channel 16#FB2D = 64301
DRC1 Channel for reference frequency 16#FB37 = 64311
CRP1 Active channels on fault n-1 16#1C7B = 7291 16#202A/5C
RTP1 Run Elapsed time 16#1C5D = 7261 16#202A/3E
OTP1 Motor torque 16#1CA3 = 7331 16#202B/20
TDP1 Drive thermal state 16#1CAD = 7341 16#202B/2A
TJP1 IGBT junction temp 16#1CB7 = 7351 16#202B/34
SFP1 Switching frequency 16#1CC1 = 7361 16#202B/3E
DP2 Fault code on fault n-2 16#1C22 = 7202 16#202A/3
ULP2 DC bus voltage 16#1C68 = 7272 16#202A/49
LCP2 Motor current 16#1C4A = 7242 16#202A/2B
RFP2 Output frequency 16#1C54 = 7252 16#202A/35
THP2 Motor thermal state 16#1C72 = 7282 16#202A/53
EP2 Status of last error 2 16#1C2C = 7212 16#202A/D
IP2 ETI state word 16#1C36 = 7222 16#202A/17
CMP2 Cmd word 16#1C40 = 7232 16#202A/21
DCC2 Command channel 16#FB2E = 64302
DRC2 Channel for reference frequency 16#FB38 = 64312
CRP2 Active channels on fault n-2 16#1C7C = 7292 16#202A/5D
RTP2 Run Elapsed time 16#1C5E = 7262 16#202A/3F
OTP2 Motor torque 16#1CA4 = 7332 16#202B/21
TDP2 Drive thermal state 16#1CAE = 7342 16#202B/2B

# Internal
TJP2 IGBT junction temp 16#1CB8 = 7352 16#202B/35
SFP2 Switching frequency 16#1CC2 = 7362 16#202B/3F
DP3 Fault code on fault n-3 16#1C23 = 7203 16#202A/4
ULP3 DC bus voltage 16#1C69 = 7273 16#202A/4A
LCP3 Motor current 16#1C4B = 7243 16#202A/2C
RFP3 Output frequency 16#1C55 = 7253 16#202A/36
THP3 Motor thermal state 16#1C73 = 7283 16#202A/54
EP3 Status of last error 3 16#1C2D = 7213 16#202A/E
IP3 ETI state word 16#1C37 = 7223 16#202A/18
CMP3 Cmd word 16#1C41 = 7233 16#202A/22
DCC3 Command channel 16#FB2F = 64303
DRC3 Channel for reference frequency 16#FB39 = 64313
CRP3 Active channels on fault n-3 16#1C7D = 7293 16#202A/5E
RTP3 Run Elapsed time 16#1C5F = 7263 16#202A/40
OTP3 Motor torque 16#1CA5 = 7333 16#202B/22
TDP3 Drive thermal state 16#1CAF = 7343 16#202B/2C
TJP3 IGBT junction temp 16#1CB9 = 7353 16#202B/36
SFP3 Switching frequency 16#1CC3 = 7363 16#202B/40
DP4 Fault code on fault n-4 16#1C24 = 7204 16#202A/5
ULP4 DC bus voltage 16#1C6A = 7274 16#202A/4B
LCP4 Motor current 16#1C4C = 7244 16#202A/2D
RFP4 Output frequency 16#1C56 = 7254 16#202A/37
THP4 Motor thermal state 16#1C74 = 7284 16#202A/55
EP4 Status of last error 4 16#1C2E = 7214 16#202A/F
IP4 ETI state word 16#1C38 = 7224 16#202A/19
CMP4 Cmd word 16#1C42 = 7234 16#202A/23
DCC4 Command channel 16#FB30 = 64304
DRC4 Channel for reference frequency 16#FB3A = 64314
CRP4 Active channels on fault n-4 16#1C7E = 7294 16#202A/5F
RTP4 Run Elapsed time 16#1C60 = 7264 16#202A/41
OTP4 Motor torque 16#1CA6 = 7334 16#202B/23
TDP4 Drive thermal state 16#1CB0 = 7344 16#202B/2D
TJP4 IGBT junction temp 16#1CBA = 7354 16#202B/37
SFP4 Switching frequency 16#1CC4 = 7364 16#202B/41
DP5 Fault code on fault n-5 16#1C25 = 7205 16#202A/6
ULP5 DC bus voltage 16#1C6B = 7275 16#202A/4C
LCP5 Motor current 16#1C4D = 7245 16#202A/2E
RFP5 Output frequency 16#1C57 = 7255 16#202A/38
THP5 Motor thermal state 16#1C75 = 7285 16#202A/56
EP5 State word 16#1C2F = 7215 16#202A/10
IP5 ETI state word 16#1C39 = 7225 16#202A/1A
CMP5 Cmd word 16#1C43 = 7235 16#202A/24
DCC5 Command channel 16#FB31 = 64305
DRC5 Channel for reference frequency 16#FB3B = 64315
CRP5 Active channels on fault n-5 16#1C7F = 7295 16#202A/60
RTP5 Run Elapsed time 16#1C61 = 7265 16#202A/42
OTP5 Motor torque 16#1CA7 = 7335 16#202B/24
TDP5 Drive thermal state 16#1CB1 = 7345 16#202B/2E
TJP5 IGBT junction temp 16#1CBB = 7355 16#202B/38
SFP5 Switching frequency 16#1CC5 = 7365 16#202B/42
DP6 Fault code on fault n-6 16#1C26 = 7206 16#202A/7
ULP6 DC bus voltage 16#1C6C = 7276 16#202A/4D
LCP6 Motor current 16#1C4E = 7246 16#202A/2F
RFP6 Output frequency 16#1C58 = 7256 16#202A/39
THP6 Motor thermal state 16#1C76 = 7286 16#202A/57
EP6 State word 16#1C30 = 7216 16#202A/11
IP6 ETI state word 16#1C3A = 7226 16#202A/1B
CMP6 Cmd word 16#1C44 = 7236 16#202A/25
DCC6 Command channel 16#FB32 = 64306
DRC6 Channel for reference frequency 16#FB3C = 64316
CRP6 Active channels on fault n-6 16#1C80 = 7296 16#202A/61

# Internal
RTP6 Run Elapsed time 16#1C62 = 7266 16#202A/43
OTP6 Motor torque 16#1CA8 = 7336 16#202B/25
TDP6 Drive thermal state 16#1CB2 = 7346 16#202B/2F
TJP6 IGBT junction temp 16#1CBC = 7356 16#202B/39
SFP6 Switching frequency 16#1CC6 = 7366 16#202B/43
DP7 Fault code on fault n-7 16#1C27 = 7207 16#202A/8
ULP7 DC bus voltage 16#1C6D = 7277 16#202A/4E
LCP7 Motor current 16#1C4F = 7247 16#202A/30
RFP7 Output frequency 16#1C59 = 7257 16#202A/3A
THP7 Motor thermal state 16#1C77 = 7287 16#202A/58
EP7 State word 16#1C31 = 7217 16#202A/12
IP7 ETI state word 16#1C3B = 7227 16#202A/1C
CMP7 Cmd word 16#1C45 = 7237 16#202A/26
DCC7 Command channel 16#FB33 = 64307
DRC7 Channel for reference frequency 16#FB3D = 64317
CRP7 Active channels on fault n-7 16#1C81 = 7297 16#202A/62
RTP7 Run Elapsed time 16#1C63 = 7267 16#202A/44
OTP7 Motor torque 16#1CA9 = 7337 16#202B/26
TDP7 Drive thermal state 16#1CB3 = 7347 16#202B/30
TJP7 IGBT junction temp 16#1CBD = 7357 16#202B/3A
SFP7 Switching frequency 16#1CC7 = 7367 16#202B/44
DP8 Fault code on fault n-8 16#1C28 = 7208 16#202A/9
ULP8 DC bus voltage 16#1C6E = 7278 16#202A/4F
LCP8 Motor current 16#1C50 = 7248 16#202A/31
RFP8 Output frequency 16#1C5A = 7258 16#202A/3B
THP8 Motor thermal state 16#1C78 = 7288 16#202A/59
EP8 State word 16#1C32 = 7218 16#202A/13
IP8 ETI state word 16#1C3C = 7228 16#202A/1D
CMP8 Cmd word 16#1C46 = 7238 16#202A/27
DCC8 Command channel 16#FB34 = 64308
DRC8 Channel for reference frequency 16#FB3E = 64318
CRP8 Active channels on fault n-8 16#1C82 = 7298 16#202A/63
RTP8 Run Elapsed time 16#1C64 = 7268 16#202A/45
OTP8 Motor torque 16#1CAA = 7338 16#202B/27
TDP8 Drive thermal state 16#1CB4 = 7348 16#202B/31
TJP8 IGBT junction temp 16#1CBE = 7358 16#202B/3B
SFP8 Switching frequency 16#1CC8 = 7368 16#202B/45
NCV Drive nominal rating 16#0BC3 = 3011 16#2000/C
VCAL Drive mains voltage 16#0BC4 = 3012 16#2000/D
INV Nominal Drive current 16#0BC9 = 3017 16#2000/12
VDP Device software version 16#0CE6 = 3302 16#2003/3
PAN0 Device name (char 1 and 2) 16#0D0C = 3340 16#2003/29
PAN1 Device name (char 3 and 4) 16#0D0D = 3341 16#2003/2A
PAN2 Device name (char 5 and 6) 16#0D0E = 3342 16#2003/2B
PAN3 Device name (char 7 and 8) 16#0D0F = 3343 16#2003/2C
PAN4 Device name (char 9 and 10) 16#0D10 = 3344 16#2003/2D
PAN5 Device name (char 11 and 12) 16#0D11 = 3345 16#2003/2E
PAN6 Device name (char 13 and 14) 16#0D12 = 3346 16#2003/2F
PAN7 Device name (char 15 and 16) 16#0D13 = 3347 16#2003/30
NC1 Com scan output 1 value 16#31D9 = 12761 16#2061/3E
NC2 Com scan output 2 value 16#31DA = 12762 16#2061/3F
NC3 Com scan output 3 value 16#31DB = 12763 16#2061/40
NC4 Com scan output 4 value 16#31DC = 12764 16#2061/41
NC5 Com scan output 5 value 16#31DD = 12765 16#2061/42
NC6 Com scan output 6 value 16#31DE = 12766 16#2061/43
NC7 Com scan output 7 value 16#31DF = 12767 16#2061/44
NC8 Com scan output 8 value 16#31E0 = 12768 16#2061/45
NM1 Com scan input 1 value 16#31C5 = 12741 16#2061/2A
NM2 Com scan input 2 value 16#31C6 = 12742 16#2061/2B
NM3 Com scan input 3 value 16#31C7 = 12743 16#2061/2C
NM4 Com scan input 4 value 16#31C8 = 12744 16#2061/2D

# Internal
 NM5 Com scan input 5 value 16#31C9 = 12745 16#2061/2E
NM6 Com scan input 6 value 16#31CA = 12746 16#2061/2F
NM7 Com scan input 7 value 16#31CB = 12747 16#2061/30
NM8 Com scan input 8 value 16#31CC = 12748 16#2061/31
SMAL Velocity min amount 16#21A1 = 8609 16#2038/A
SMIL Velocity max amount 16#219F = 8607 16#2038/8
SPAL Acceleration delta speed 16#21A3 = 8611 16#2038/C
SPAT Acceleration delta time 16#21A5 = 8613 16#2038/E
SPDL Deceleration delta speed 16#21A6 = 8614 16#2038/F
SPFN Setpoint factor numerator 16#21C2 = 8642 16#2038/2B
SPFD Setpoint factor denominator 16#21C3 = 8643 16#2038/2C
DOTD Type of switchOn Disable Stop 16#21CC = 8652 16#2038/35
QSTD Quick stop option code 16#21CB = 8651 16#2038/34
SCS Save configuration 16#1F41 = 8001 16#2032/2
FCS Restore configuration 16#1F42 = 8002 16#2032/3
FRY Factory setting group 16#0BCE = 3022 16#2000/17
CHA1 Parameter set sel 1 16#3266 = 12902 16#2063/3
CHA2 Parameter set sel 2 16#3267 = 12903 16#2063/4
CFPS Used parameter set 16#3264 = 12900 16#2063/1
VAL Load parameter set command 16#3265 = 12901 16#2063/2
AD01 Parameter set address 1 16#326F = 12911 16#2063/C
AD02 Parameter set address 2 16#3270 = 12912 16#2063/D
AD03 Parameter set address 3 16#3271 = 12913 16#2063/E
AD04 Parameter set address 4 16#3272 = 12914 16#2063/F
AD05 Parameter set address 5 16#3273 = 12915 16#2063/10
AD06 Parameter set address 6 16#3274 = 12916 16#2063/11
AD07 Parameter set address 7 16#3275 = 12917 16#2063/12
AD08 Parameter set address 8 16#3276 = 12918 16#2063/13
AD09 Parameter set address 9 16#3277 = 12919 16#2063/14
AD10 Parameter set address 10 16#3278 = 12920 16#2063/15
AD11 Parameter set address 11 16#3279 = 12921 16#2063/16
AD12 Parameter set address 12 16#327A = 12922 16#2063/17
AD13 Parameter set address 13 16#327B = 12923 16#2063/18
AD14 Parameter set address 14 16#327C = 12924 16#2063/19
AD15 Parameter set address 15 16#327D = 12925 16#2063/1A
S101 Parameter set 1 value 1 16#3283 = 12931 16#2063/20
S102 Parameter set 1 value 2 16#3284 = 12932 16#2063/21
S103 Parameter set 1 value 3 16#3285 = 12933 16#2063/22
S104 Parameter set 1 value 4 16#3286 = 12934 16#2063/23
S105 Parameter set 1 value 5 16#3287 = 12935 16#2063/24
S106 Parameter set 1 value 6 16#3288 = 12936 16#2063/25
S107 Parameter set 1 value 7 16#3289 = 12937 16#2063/26
S108 Parameter set 1 value 8 16#328A = 12938 16#2063/27
S109 Parameter set 1 value 9 16#328B = 12939 16#2063/28
S110 Parameter set 1 value 10 16#328C = 12940 16#2063/29
S111 Parameter set 1 value 11 16#328D = 12941 16#2063/2A
S112 Parameter set 1 value 12 16#328E = 12942 16#2063/2B
S113 Parameter set 1 value 13 16#328F = 12943 16#2063/2C
S114 Parameter set 1 value 14 16#3290 = 12944 16#2063/2D
S115 Parameter set 1 value 15 16#3291 = 12945 16#2063/2E
S201 Parameter set 2 value 1 16#3297 = 12951 16#2063/34
S202 Parameter set 2 value 2 16#3298 = 12952 16#2063/35
S203 Parameter set 2 value 3 16#3299 = 12953 16#2063/36
S204 Parameter set 2 value 4 16#329A = 12954 16#2063/37
S205 Parameter set 2 value 5 16#329B = 12955 16#2063/38
S206 Parameter set 2 value 6 16#329C = 12956 16#2063/39
S207 Parameter set 2 value 7 16#329D = 12957 16#2063/3A
S208 Parameter set 2 value 8 16#329E = 12958 16#2063/3B
S209 Parameter set 2 value 9 16#329F = 12959 16#2063/3C
S210 Parameter set 2 value 10 16#32A0 = 12960 16#2063/3D
S211 Parameter set 2 value 11 16#32A1 = 12961 16#2063/3E

# Internal
S212 Parameter set 2 value 12 16#32A2 = 12962 16#2063/3F
S213 Parameter set 2 value 13 16#32A3 = 12963 16#2063/40
S214 Parameter set 2 value 14 16#32A4 = 12964 16#2063/41
S215 Parameter set 2 value 15 16#32A5 = 12965 16#2063/42
S301 Parameter set 3 value 1 16#32AB = 12971 16#2063/48
S302 Parameter set 3 value 2 16#32AC = 12972 16#2063/49
S303 Parameter set 3 value 3 16#32AD = 12973 16#2063/4A
S304 Parameter set 3 value 4 16#32AE = 12974 16#2063/4B
S305 Parameter set 3 value 5 16#32AF = 12975 16#2063/4C
S306 Parameter set 3 value 6 16#32B0 = 12976 16#2063/4D
S307 Parameter set 3 value 7 16#32B1 = 12977 16#2063/4E
S308 Parameter set 3 value 8 16#32B2 = 12978 16#2063/4F
S309 Parameter set 3 value 9 16#32B3 = 12979 16#2063/50
S310 Parameter set 3 value 10 16#32B4 = 12980 16#2063/51
S311 Parameter set 3 value 11 16#32B5 = 12981 16#2063/52
S312 Parameter set 3 value 12 16#32B6 = 12982 16#2063/53
S313 Parameter set 3 value 13 16#32B7 = 12983 16#2063/54
S314 Parameter set 3 value 14 16#32B8 = 12984 16#2063/55
S315 Parameter set 3 value 15 16#32B9 = 12985 16#2063/56
LSP Low speed 16#0C21 = 3105 16#2001/6

HSP High speed 16#0C20 = 3104 16#2001/5

ITH Motor Thermal current 16#2596 = 9622 16#2042/17

SPGU Inertia factor 16#259D = 9629 16#2042/1E

SPG Speed proportional gain 16#238F = 9103 16#203D/4

SIT Speed time integral 16#2390 = 9104 16#203D/5

SFC K speed loop filter 16#2391 = 9105 16#203D/6

JACO Inertia Coefficient of the application 16#2398 = 9112 16#203D/D

SSL Speed loop type 16#2392 = 9106 16#203D/7
JEST Estimated application inertia 16#2393 = 9107 16#203D/8
JAPL Application Inertia 16#2394 = 9108 16#203D/9
JMUL Inertia Multiplying Coefficient 16#2395 = 9109 16#203D/A
FFP Feed forward value 16#2396 = 9110 16#203D/B
FFV Feed forward bandwidth 16#2397 = 9111 16#203D/C
FFH Filter time of the estimated speed 16#239B = 9115 16#203D/10
CRTF Filter time of the current 16#239C = 9116 16#203D/11
CTD High current threshold 16#2AF9 = 11001 16#2050/2

TTH High torque threshold 16#2B08 = 11016 16#2050/11

TTL Low torque threshold 16#2B07 = 11015 16#2050/10

FTD Motor frequency threshold 16#2AFB = 11003 16#2050/4

F2D Frequency threshold 2 16#2AFC = 11004 16#2050/5

JF2 Skip frequency 2 16#2C26 = 11302 16#2053/3

# Internal
JPF Skip frequency 16#2C25 = 11301 16#2053/2

JFH Skip Freq. hysteresis 16#2C2F = 11311 16#2053/C

JF3 3rd Skip frequency 16#2C27 = 11303 16#2053/4

BFR Motor Standard 16#0BC7 = 3015 16#2000/10

NPR Nominal motor power 16#258D = 9613 16#2042/E

COS Motor 1 Cosinus Phi 16#2586 = 9606 16#2042/7

UNS Nominal motor voltage 16#2581 = 9601 16#2042/2

NCR Nominal motor current 16#2583 = 9603 16#2042/4

FRS Nominal motor frequency 16#2582 = 9602 16#2042/3

NSP Nominal motor speed 16#2584 = 9604 16#2042/5

TFR Max frequency 16#0C1F = 3103 16#2001/4

TUN Autotuning 16#2588 = 9608 16#2042/9

AUT Automatic autotune 16#258F = 9615 16#2042/10

TUS Autotuning status 16#2589 = 9609 16#2042/A

CTT Motor control type 16#2587 = 9607 16#2042/8

U1 Volt point 1 on 5pt V/F 16#3073 = 12403 16#205E/4
F1 Freq point 1on 5pt V/F 16#3074 = 12404 16#205E/5
U2 Volt point 2 on 5pt V/F 16#3075 = 12405 16#205E/6
F2 Freq point 2 on 5pt V/F 16#3076 = 12406 16#205E/7
U3 Volt point 3 on 5pt V/F 16#3077 = 12407 16#205E/8
F3 Freq point 3 on 5pt V/F 16#3078 = 12408 16#205E/9
U4 Volt point 4 on 5pt V/F 16#3079 = 12409 16#205E/A
F4 Freq point 4 on 5pt V/F 16#307A = 12410 16#205E/B
U5 Volt point 5 on 5pt V/F 16#307B = 12411 16#205E/C
F5 Freq point 5 on 5pt V/F 16#307C = 12412 16#205E/D
NCRS Sync motor nominal current 16#25C6 = 9670 16#2042/47
NSPS Nominal synchronous motor speed 16#25C7 = 9671 16#2042/48
PPNS Pole pairs number (sync) 16#25C8 = 9672 16#2042/49
TQS Nominal motor torque 16#25D4 = 9684 16#2042/55
PHS Sync. EMF constant 16#25C9 = 9673 16#2042/4A
LDS Sync motor d inductance 16#25CA = 9674 16#2042/4B
LQS Sync motor q inductance 16#25CB = 9675 16#2042/4C
RSAS Calculated SyncMotor Stator R 16#25D2 = 9682 16#2042/53
UFR IR compensation 16#2597 = 9623 16#2042/18

SLP Slip Compensation 16#2599 = 9625 16#2042/1A

PPN Number of pairs of poles calculated 16#2592 = 9618 16#2042/13

FLG Frequency loop gain 16#2594 = 9620 16#2042/15
STA Frequency loop stability 16#2595 = 9621 16#2042/16
RSA AsyncMotor Stator resistance 16#25AA = 9642 16#2042/2B
IDA Magnetizing current 16#25B4 = 9652 16#2042/35
LFA AsyncMotor Leakage inductance 16#25BE = 9662 16#2042/3F
TRA Rotor time constant 16#25C3 = 9667 16#2042/44
FRSS Synchronous motor nominal freq 16#25CF = 9679 16#2042/50

# Internal
SFR Switching frequency 16#0C1E = 3102 16#2001/3

CLI Current limitation 16#23F1 = 9201 16#203E/2

SFT Switching frequency type 16#0C1D = 3101 16#2001/2

NRD Motor Noise Reduction 16#0C23 = 3107 16#2001/8
BOA Boost activation 16#3656 = 13910 16#206D/B
SVL Motor surge limitation 16#3139 = 12601 16#2060/2
SOP Attenuation time 16#313A = 12602 16#2060/3

FFM Fan mode 16#0C3A = 3130 16#2001/1F

TCC 2/3-wire control 16#2B5D = 11101 16#2051/2

TCT Type of 2-wire control 16#2B5E = 11102 16#2051/3

RRS Reverse assignment 16#2B61 = 11105 16#2051/6
BSP Reference frequency template selection 16#0C22 = 3106 16#2001/7

AI1T Configuration of AI1 16#1132 = 4402 16#200E/3

# Internal
UIL1 AI1 voltage scaling parameter of 0% 16#113C = 4412 16#200E/D

UIH1 AI1 voltage scaling parameter of 100% 16#1146 = 4422 16#200E/17

AI1F AI1 filter 16#1164 = 4452 16#200E/35

AI1E AI1 intermediate point X 16#116E = 4462 16#200E/3F

AI1S AI1 intermediate point Y 16#1178 = 4472 16#200E/49

# Internal
AI2T Configuration of AI2 16#1133 = 4403 16#200E/4

UIL2 AI2 voltage scaling parameter of 0% 16#113D = 4413 16#200E/E

# Internal
UIH2 AI2 voltage scaling parameter of 100% 16#1147 = 4423 16#200E/18

AI2F AI2 filter 16#1165 = 4453 16#200E/36

AI2E AI2 intermediate point X 16#116F = 4463 16#200E/40

AI2S AI2 intermediate point Y 16#1179 = 4473 16#200E/4A
AI3T Configuration of AI3 16#1134 = 4404 16#200E/5

# Internal
CRL3 AI3 current scaling parameter of 0% 16#1152 = 4434 16#200E/23

CRH3 AI3 current scaling parameter of 100% 16#115C = 4444 16#200E/2D

AI3F AI3 filter 16#1166 = 4454 16#200E/37

AI3E AI3 intermediate point X 16#1170 = 4464 16#200E/41

AI3S AI3 intermediate point Y 16#117A = 4474 16#200E/4B
AO1 AQ1 assignment 16#139D = 5021 16#2014/16

AO1T AQ1 Type 16#11F9 = 4601 16#2010/2

AOL1 AQ1 min output value 16#1221 = 4641 16#2010/2A

AOH1 AQ1 max output value 16#122B = 4651 16#2010/34

UOL1 AQ1 minimum output 16#120D = 4621 16#2010/16

UOH1 AQ1 maximum output 16#1217 = 4631 16#2010/20

# Internal
ASL1 Scaling AQ1 min 16#1235 = 4661 16#2010/3E

ASH1 Scaling AQ1 max 16#123F = 4671 16#2010/48

AO1F AQ1 filter 16#1203 = 4611 16#2010/C

FR1 Configuration reference frequency 1 16#20DD = 8413 16#2036/E

RIN Reverse direction disable 16#0C24 = 3108 16#2001/9

PST Stop key enable 16#FA02 = 64002

CHCF Control mode configuration 16#20D1 = 8401 16#2036/2
CCS Command switching 16#20E5 = 8421 16#2036/16
CD1 Command channel 1 assign 16#20E7 = 8423 16#2036/18
CD2 Command channel 2 assign 16#20E8 = 8424 16#2036/19
RFC Freq switching assignment 16#20DB = 8411 16#2036/C
FR2 Configuration reference frequency 2 16#20DE = 8414 16#2036/F
COP Copy Ch.1-Ch.2 16#20D2 = 8402 16#2036/3
FN1 F1 key assignment 16#34BD = 13501 16#2069/2
FN2 F2 key assignment 16#34BE = 13502 16#2069/3
FN3 F3 key assignment 16#34BF = 13503 16#2069/4
FN4 F4 key assignment 16#34C0 = 13504 16#2069/5
BMP HMI local/remote command 16#34D9 = 13529 16#2069/1E
RCB Select switching (1 to 1B) 16#20DC = 8412 16#2036/D
FR1B Configuration ref. 1B 16#20DF = 8415 16#2036/10
SA2 Summing input 2 16#2E19 = 11801 16#2058/2
SA3 Summing input 3 16#2E1A = 11802 16#2058/3
DA2 Subtract reference frequency 2 16#2E23 = 11811 16#2058/C
DA3 Subtract reference frequency 3 16#2E24 = 11812 16#2058/D
MA2 Reference frequency 2 multiply 16#2E2D = 11821 16#2058/16
MA3 Reference frequency 3 multiply 16#2E2E = 11822 16#2058/17
RPT Type of ramp 16#232C = 9004 16#203C/5
INR Ramp increment 16#233C = 9020 16#203C/15

ACC Acceleration ramp time 16#2329 = 9001 16#203C/2

DEC Deceleration ramp time 16#232A = 9002 16#203C/3

TA1 Start ACC ramp rounding 16#232D = 9005 16#203C/6

TA2 End ACC ramp rounding 16#232E = 9006 16#203C/7

TA3 Start DEC ramp rounding 16#232F = 9007 16#203C/8

TA4 End DEC ramp rounding 16#2330 = 9008 16#203C/9

FRT Ramp 2 frequency threshold 16#2333 = 9011 16#203C/C

RPS Ramp switching assignment 16#2332 = 9010 16#203C/B
AC2 Acceleration 2 ramp time 16#2334 = 9012 16#203C/D

DE2 Deceleration 2 16#2335 = 9013 16#203C/E

BRA Decel ramp adaptation 16#232B = 9003 16#203C/4

STT Type of stop 16#2BC1 = 11201 16#2052/2
FFT Freewheel stop threshold 16#2BD4 = 11220 16#2052/15

# Internal
NST Freewheel stop 16#2BC2 = 11202 16#2052/3
FST Fast stop assignment 16#2BC4 = 11204 16#2052/5
DCF Fast Stop ramp Divider 16#2BDE = 11230 16#2052/1F

DCI DC injection assignment 16#2BC3 = 11203 16#2052/4

IDC DC injection level 1 16#2BCA = 11210 16#2052/B

TDI DC injection time 1 16#2BCD = 11213 16#2052/E

IDC2 DC injection level 2 16#2BCC = 11212 16#2052/D

TDC DC injection time 2 16#2BCB = 11211 16#2052/C

ADC Automatic DC injection 16#28A1 = 10401 16#204A/2

SDC1 Auto DC injection level 1 16#28A3 = 10403 16#204A/4

TDC1 Auto DC injection time 1 16#28A2 = 10402 16#204A/3

SDC2 Auto DC injection level 2 16#28A5 = 10405 16#204A/6

TDC2 Auto DC injection time 2 16#28A4 = 10404 16#204A/5

PS2 2 Preset Freq assignment 16#2C89 = 11401 16#2054/2

PS4 4 Preset Freq assignment 16#2C8A = 11402 16#2054/3
PS8 8 Preset Freq assignment 16#2C8B = 11403 16#2054/4
PS16 16 Preset Freq assignment 16#2C8C = 11404 16#2054/5
SP2 Preset speed 2 16#2C92 = 11410 16#2054/B

SP3 Preset speed 3 16#2C93 = 11411 16#2054/C

SP4 Preset speed 4 16#2C94 = 11412 16#2054/D

SP5 Preset speed 5 16#2C95 = 11413 16#2054/E

SP6 Preset speed 6 16#2C96 = 11414 16#2054/F

SP7 Preset speed 7 16#2C97 = 11415 16#2054/10

SP8 Preset speed 8 16#2C98 = 11416 16#2054/11

SP9 Preset speed 9 16#2C99 = 11417 16#2054/12

SP10 Preset speed 10 16#2C9A = 11418 16#2054/13

SP11 Preset speed 11 16#2C9B = 11419 16#2054/14

SP12 Preset speed 12 16#2C9C = 11420 16#2054/15

SP13 Preset speed 13 16#2C9D = 11421 16#2054/16

SP14 Preset speed 14 16#2C9E = 11422 16#2054/17

SP15 Preset speed 15 16#2C9F = 11423 16#2054/18

SP16 Preset speed 16 16#2CA0 = 11424 16#2054/19

USP + speed assignment 16#2CED = 11501 16#2055/2

DSP - speed assignment 16#2CEE = 11502 16#2055/3
STR Reference frequency save 16#2CEF = 11503 16#2055/4
AST Auto angle setting type 16#3665 = 13925 16#206D/1A

MCR Maximum current of PSI alignment 16#3CF7 = 15607 16#207E/8

# Internal
PIF PID controller feedback 16#2E7D = 11901 16#2059/2

PIF1 Minimum PID feedback 16#2E80 = 11904 16#2059/5

PIF2 Maximum PID feedback 16#2E81 = 11905 16#2059/6

PIP1 Minimum PID process 16#2E82 = 11906 16#2059/7

PIP2 Maximum PID process 16#2E83 = 11907 16#2059/8

PII Internal PID reference 16#2E84 = 11908 16#2059/9

RPI Internal PID reference 16#2E90 = 11920 16#2059/15

RPG PID Proportional gain 16#2EA5 = 11941 16#2059/2A

RIG PID controller integral gain 16#2EA6 = 11942 16#2059/2B

RDG PID derivative gain 16#2EA7 = 11943 16#2059/2C

PRP PID ramp 16#2ED0 = 11984 16#2059/55

PIC PID inversion 16#2EA4 = 11940 16#2059/29

POL PID controller min. output 16#2EB0 = 11952 16#2059/35

POH PID controller max. output 16#2EB1 = 11953 16#2059/36

PAL Minimum feedback level warning 16#2EB9 = 11961 16#2059/3E

PAH Maximum feedback level warning 16#2EBA = 11962 16#2059/3F

PER PID error warning 16#2EBB = 11963 16#2059/40

PIS PID integral disabled 16#2EA8 = 11944 16#2059/2D

# Internal
FPI Predictive speed reference 16#2EAE = 11950 16#2059/33

PSR PID speed input % ref 16#2EAF = 11951 16#2059/34

PAU Auto/Manual select input 16#2EC2 = 11970 16#2059/47

PIM Manual PID reference 16#2EB2 = 11954 16#2059/37

TLS Low speed timeout 16#2DB5 = 11701 16#2057/2

PR2 2 PID Preset assignment 16#2E85 = 11909 16#2059/A

PR4 4 PID Preset assignment 16#2E86 = 11910 16#2059/B

RP2 2nd PID preset reference 16#2E91 = 11921 16#2059/16

RP3 3rd PID preset reference 16#2E92 = 11922 16#2059/17

RP4 4th PID preset reference 16#2E93 = 11923 16#2059/18

TLA Torque limit. activation 16#23FA = 9210 16#203E/B

LLC Mains contactor control 16#3522 = 13602 16#206A/3
LES Device lock assignment 16#3521 = 13601 16#206A/2

LCT Time-out after cont. activ. 16#3523 = 13603 16#206A/4

TUL Autotuning input assignment 16#258A = 9610 16#2042/B

RSF Fault reset input assignment 16#1BD4 = 7124 16#2029/19
RP Product restart 16#1BD8 = 7128 16#2029/1D
RPA Product restart assignment 16#1BD9 = 7129 16#2029/1E
ATR Automatic fault reset 16#1BD2 = 7122 16#2029/17

TAR Fault Reset time 16#1BD3 = 7123 16#2029/18

FLR Catch on fly 16#0C26 = 3110 16#2001/B

THT Motor thermal monitoring mode 16#258C = 9612 16#2042/D

TTD Motor thermal threshold 16#2AFA = 11002 16#2050/3

OLL Motor overtemp error response 16#1B61 = 7009 16#2028/A

OPL Output Phase Loss assignment 16#258B = 9611 16#2042/C
ODT Output Phase Loss delay 16#1BA9 = 7081 16#2028/52
IPL Input Phase Loss assignment 16#1B5A = 7002 16#2028/3
OHL Drive overtemp error response 16#1B60 = 7008 16#2028/9
THA Device thermal state warning 16#2B01 = 11009 16#2050/A
ETF External error assignment 16#1BDB = 7131 16#2029/20
EPL Device response to external error 16#1B5E = 7006 16#2028/7
USB Response to undervoltage 16#35EB = 13803 16#206C/4
URES Evacuation mains voltage 16#35E9 = 13801 16#206C/2

# Internal
 USL Undervoltage level 16#35EA = 13802 16#206C/3
UST Undervoltage timeout 16#35EC = 13804 16#206C/5
STP Stop type on power loss 16#1B5C = 7004 16#2028/5
TSM Undervolt. restart time 16#35F5 = 13813 16#206C/E
UPL Under V prevention level 16#35F3 = 13811 16#206C/C
STM Maximum stop time 16#35F6 = 13814 16#206C/F
TBS DC bus maintain time 16#35F4 = 13812 16#206C/D
STRT Output short circuit test 16#0C28 = 3112 16#2001/D
COFM Catch on fly mode 16#0C29 = 3113 16#2001/E
LFL3 Response to 4-20mA loss on AI3 16#1B65 = 7013 16#2028/E
INH Disable error detection 16#1BD5 = 7125 16#2029/1A

INHS Forced Run 16#1BD6 = 7126 16#2029/1B

INHR Forced Run reference frequency 16#1BD7 = 7127 16#2029/1C
CLL Response to Fieldbus module communication interruption 16#1B67 = 7015 16#2028/10
COL Response to CANopen error 16#1B63 = 7011 16#2028/C
SLL Response to Modbus interruption 16#1B62 = 7010 16#2028/B
TNL Response to Autotuning error 16#1B64 = 7012 16#2028/D
PPI Pairing password 16#36B1 = 14001 16#206E/2
LFF Fall back speed 16#1BA8 = 7080 16#2028/51

NCA1 Scan output 1 address 16#31B1 = 12721 16#2061/16

NCA2 Scan output 2 address 16#31B2 = 12722 16#2061/17
NCA3 Scan output 3 address 16#31B3 = 12723 16#2061/18
NCA4 Scan output 4 address 16#31B4 = 12724 16#2061/19
NCA5 Scan output 5 address 16#31B5 = 12725 16#2061/1A
NCA6 Scan output 6 address 16#31B6 = 12726 16#2061/1B
NCA7 Scan output 7 address 16#31B7 = 12727 16#2061/1C
NCA8 Scan output 8 address 16#31B8 = 12728 16#2061/1D
NMA1 Scan input 1 address 16#319D = 12701 16#2061/2
NMA2 Scan input 2 address 16#319E = 12702 16#2061/3
NMA3 Scan input 3 address 16#319F = 12703 16#2061/4
NMA4 Scan input 4 address 16#31A0 = 12704 16#2061/5
NMA5 Scan input 5 address 16#31A1 = 12705 16#2061/6
NMA6 Scan input 6 address 16#31A2 = 12706 16#2061/7
NMA7 Scan input 7 address 16#31A3 = 12707 16#2061/8
NMA8 Scan input 8 address 16#31A4 = 12708 16#2061/9
OMA1 Scan input 1 address 16#3C29 = 15401 16#207C/2
OMA2 Scan input 2 address 16#3C2A = 15402 16#207C/3
OMA3 Scan input 3 address 16#3C2B = 15403 16#207C/4
OMA4 Scan input 4 address 16#3C2C = 15404 16#207C/5
OMA5 Scan input 5 address 16#3C2D = 15405 16#207C/6
OMA6 Scan input 6 address 16#3C2E = 15406 16#207C/7
OCA1 Scan output 1 address 16#3C3D = 15421 16#207C/16
OCA2 Scan output 2 address 16#3C3E = 15422 16#207C/17
OCA3 Scan output 3 address 16#3C3F = 15423 16#207C/18
OCA4 Scan output 4 address 16#3C40 = 15424 16#207C/19
OCA5 Scan output 5 address 16#3C41 = 15425 16#207C/1A
OCA6 Scan output 6 address 16#3C42 = 15426 16#207C/1B

# Internal
 ADD Device modbus address 16#1771 = 6001 16#201E/2
AMOC Mdb add comm. module 16#19FB = 6651 16#2024/34
TBR Modbus baud rate 16#1773 = 6003 16#201E/4
TFO Modbus format 16#1774 = 6004 16#201E/5
TTO Modbus timeout 16#1775 = 6005 16#201E/6
ADCO Device CANopen address 16#17A3 = 6051 16#201E/34
BDCO CANopen baudrate 16#17A5 = 6053 16#201E/36
ERCO CANopen error 16#17A8 = 6056 16#201E/39

FLO Forced local assignment 16#20EF = 8431 16#2036/20

FLOC Forced Local channel assignment 16#20F0 = 8432 16#2036/21
FLOT Time-out forc. local 16#20F1 = 8433 16#2036/22
ADRC Device address 16#19C9 = 6601 16#2024/2

PRFL PPO profile used 16#1A09 = 6665 16#2024/42

DPMA DP Master active 16#1A0A = 6666 16#2024/43

CIOA Configured assembly 16#1A0B = 6667 16#2024/44

BDR Comm. option baudrate 16#19CB = 6603 16#2024/4

BDRU Data rate used 16#1A04 = 6660 16#2024/3D

RDS Rate and duplex setting 16#FAFB = 64251

EWE Enable web and/or email 16#FB08 = 64264
ARD Actual rate and duplex 16#FB0A = 64266
L1D DI1 delay 16#0FA1 = 4001 16#200A/2
R1 R1 assignment 16#1389 = 5001 16#2014/2
R2 R2 assignment 16#138A = 5002 16#2014/3
L2D DI2 delay 16#0FA2 = 4002 16#200A/3
R1D R1 delay time 16#1091 = 4241 16#200C/2A
R2D R2 delay time 16#1092 = 4242 16#200C/2B
L3D DI3 delay 16#0FA3 = 4003 16#200A/4
R1S R1 active level 16#1069 = 4201 16#200C/2
R2S R2 active level 16#106A = 4202 16#200C/3
L4D DI4 delay 16#0FA4 = 4004 16#200A/5
R1H R1 holding time 16#107D = 4221 16#200C/16
R2H R2 holding time 16#107E = 4222 16#200C/17
L5D DI5 delay 16#0FA5 = 4005 16#200A/6
L6D DI6 delay 16#0FA6 = 4006 16#200A/7
FRHT FRH high resolution 16#0C96 = 3222 16#2002/17
SLCR LCR without filter 16#0C98 = 3224 16#2002/19
SRFR RFR without filter 16#0C99 = 3225 16#2002/1A
SOTR Motor torque (% of Cn motor in Q12) without filter 16#0C9A = 3226 16#2002/1B
SULN ULN without filter 16#0C9D = 3229 16#2002/1E
SOPR OPR without filter 16#0CDA = 3290 16#2002/5B
SAI1 AI1 physical value without filter 16#14AB = 5291 16#2016/5C
SAI2 AI2 physical value without filter 16#14AC = 5292 16#2016/5D
SAI3 AI3 physical value without filter 16#14AD = 5293 16#2016/5E
SAO1 AO1 physical value without filter 16#14AF = 5295 16#2016/60
ULT Underload detection delay 16#384B = 14411 16#2072/C
SRB Hysteresis frequency 16#3841 = 14401 16#2072/2

UDL Response to underload error 16#384C = 14412 16#2072/D

RMUD Unld. Freq.Thr. Detection 16#384E = 14414 16#2072/F

LUL Unld.Thr. at O speed 16#384F = 14415 16#2072/10

# Internal
LUN Unld.Thr. at Nom. speed 16#3850 = 14416 16#2072/11

TOL Overload detection delay 16#3855 = 14421 16#2072/16

ODL Response to overload error 16#3856 = 14422 16#2072/17
STOS Safe torque Off function Status 16#3BDA = 15322 16#207B/17
ACCP PID acceleration time 16#2ED1 = 11985 16#2059/56

ACCS Acceleration on Start 16#2350 = 9040 16#203C/29

AI1I AI1 input physical image (MAX = 8192) 16#1466 = 5222 16#2016/17
AI1J AI1 lowest process 16#1196 = 4502 16#200F/3

AI1K AI1 highest process 16#11A0 = 4512 16#200F/D

AI2I AI2 input physical image (MAX = 8192) 16#1467 = 5223 16#2016/18

# Internal
AI2J AI2 lowest process 16#1197 = 4503 16#200F/4

AI2K AI2 highest process 16#11A1 = 4513 16#200F/E

AI3I AI3 input physical image (MAX = 8192) 16#1468 = 5224 16#2016/19
AI3J AI3 lowest process 16#1198 = 4504 16#200F/5

# Internal
AI3K AI3 highest process 16#11A2 = 4514 16#200F/F

AI4C Physical value AI4 16#147D = 5245 16#2016/2E

AI4E AI4 intermediate point X 16#1171 = 4465 16#200E/42
AI4F AI4 filter 16#1167 = 4455 16#200E/38

AI4I AI4 input physical image (MAX = 8192) 16#1469 = 5225 16#2016/1A
AI4J AI4 lowest process 16#1199 = 4505 16#200F/6

AI4K AI4 highest process 16#11A3 = 4515 16#200F/10

AI4R Analog input 4 standardized value 16#1473 = 5235 16#2016/24

AI4S AI4 intermediate point Y 16#117B = 4475 16#200E/4C

# Internal
AI4T Configuration of AI4 16#1135 = 4405 16#200E/6

AI5C AI5 customer image (1mV, 0.001mA) 16#147E = 5246 16#2016/2F

AI5E AI5 intermediate point X 16#1172 = 4466 16#200E/43
AI5F AI5 filter 16#1168 = 4456 16#200E/39

AI5I AI5 input physical image (MAX = 8192) 16#146A = 5226 16#2016/1B
AI5J AI5 lowest process 16#119A = 4506 16#200F/7

# Internal
AI5K AI5 highest process 16#11A4 = 4516 16#200F/11

AI5R Analog input 5 standardized value 16#1474 = 5236 16#2016/25

AI5S AI5 delinearization output level 16#117C = 4476 16#200E/4D
AI5T Configuration of AI5 16#1136 = 4406 16#200E/7

# Internal
AIC1 Channel assignment for virtual Analog input AIV1 16#14A2 = 5282 16#2016/53

AO1I AO1 output physical image (MAX = 8192) 16#1483 = 5251 16#2016/34
AO2 AQ2 assignment 16#139E = 5022 16#2014/17

AO2C AQ2 physical value 16#1498 = 5272 16#2016/49

AO2F AQ2 filter 16#1204 = 4612 16#2010/D

AO2I AO2 output physical image (MAX = 8192) 16#1484 = 5252 16#2016/35
AO2R Analog output 2 standardized value 16#148E = 5262 16#2016/3F
AO2T Configuration of AQ2 16#11FA = 4602 16#2010/3
AOH2 AQ2 max output value 16#122C = 4652 16#2010/35

AOL2 AQ2 min output value 16#1222 = 4642 16#2010/2B

APPS Application state 16#3E6C = 15980 16#2081/51

ASH2 Scaling AQ2 max 16#1240 = 4672 16#2010/49

ASL2 Scaling AQ2 min 16#1236 = 4662 16#2010/3F

ASLC Advanced sleep check speed condition 16#2E05 = 11781 16#2057/52

ASLD Advanced sleep check delay 16#2E06 = 11782 16#2057/53

ASLM Advanced sleep mode 16#2E04 = 11780 16#2057/51

ASLR Advanced sleep check reference speed 16#2E07 = 11783 16#2057/54

CAR Customer warning clearing 16#3F98 = 16280 16#2084/51

CASH Money saved 16#2A36 = 10806 16#204E/7
CC1 Time counter 1 16#3F84 = 16260 16#2084/3D
CC2 Time counter 2 16#3F86 = 16262 16#2084/3F
CC3 Time counter 3 16#3F88 = 16264 16#2084/41
CC4 Time counter 4 16#3F8A = 16266 16#2084/43
CC5 Time counter 5 16#3F8C = 16268 16#2084/45
CCA1 Configuration of customer warning 1 16#3F48 = 16200 16#2084/1
CCA2 Configuration of customer warning 2 16#3F49 = 16201 16#2084/2
CCA3 Configuration of customer warning 3 16#3F4A = 16202 16#2084/3
CCA4 Configuration of customer warning 4 16#3F4B = 16203 16#2084/4
CCA5 Configuration of customer warning 5 16#3F4C = 16204 16#2084/5
CCL1 Configuration counter limit 1 16#3F70 = 16240 16#2084/29
CCL2 Configuration counter limit 2 16#3F72 = 16242 16#2084/2B
CCL3 Configuration counter limit 3 16#3F74 = 16244 16#2084/2D
CCL4 Configuration counter limit 4 16#3F76 = 16246 16#2084/2F
CCL5 Configuration counter limit 5 16#3F78 = 16248 16#2084/31

# Internal
CCS1 Configuration counter Source 1 16#3F52 = 16210 16#2084/B
CCS2 Configuration counter Source 2 16#3F53 = 16211 16#2084/C
CCS3 Configuration counter Source 3 16#3F54 = 16212 16#2084/D
CCS4 Configuration counter Source 4 16#3F55 = 16213 16#2084/E
CCS5 Configuration counter Source 5 16#3F56 = 16214 16#2084/F
CDT1 Date time warning 1 16#3F5C = 16220 16#2084/15
CDT2 Date time warning 2 16#3F5E = 16222 16#2084/17
CDT3 Date time warning 3 16#3F60 = 16224 16#2084/19
CDT4 Date time warning 4 16#3F62 = 16226 16#2084/1B
CDT5 Date time warning 5 16#3F64 = 16228 16#2084/1D
CHT Flow limit threshold active 16#38B0 = 14512 16#2073/D

CMP9 Cmd word 16#1C47 = 7239 16#202A/28

CMPA Cmd word 16#1DCE = 7630 16#202E/1F
CMPB Cmd word 16#1DCF = 7631 16#202E/20
CMPC CMD command word 16#1DD0 = 7632 16#202E/21
CMPD CMD command word 16#1DD1 = 7633 16#202E/22
CMPE CMD command word 16#1DD2 = 7634 16#202E/23
CMPF CMD command word 16#1DD3 = 7635 16#202E/24
CO2S Co2 Saved 16#2A38 = 10808 16#204E/9
CRH1 AI1 current scaling parameter of 100% 16#115A = 4442 16#200E/2B

# Internal
CRH2 AI2 current scaling parameter of 100% 16#115B = 4443 16#200E/2C

CRH4 AI4 current scaling parameter of 100% 16#115D = 4445 16#200E/2E

# Internal
CRH5 AI5 current scaling parameter of 100% 16#115E = 4446 16#200E/2F

CRL1 AI1 current scaling parameter of 0% 16#1150 = 4432 16#200E/21

# Internal
CRL2 AI2 current scaling parameter of 0% 16#1151 = 4433 16#200E/22

CRL4 AI4 current scaling parameter of 0% 16#1153 = 4435 16#200E/24

# Internal
CRL5 AI5 current scaling parameter of 0% 16#1154 = 4436 16#200E/25

CRP9 Active channels on error n-9 16#1C83 = 7299 16#202A/64

CRPA Active channels on error n-10 16#1E0A = 7690 16#202E/5B
CRPB Active channels on error n-11 16#1E0B = 7691 16#202E/5C
CRPC Active channels on error n-12 16#1E0C = 7692 16#202E/5D
CRPD Active channels on error n-13 16#1E0D = 7693 16#202E/5E
CRPE Active channels on error n-14 16#1E0E = 7694 16#202E/5F
CRPF Active channels on error n-15 16#1E0F = 7695 16#202E/60
CTDL Low current threshold 16#2B02 = 11010 16#2050/B

CVHS Speed level from which check-valve ramp is used 16#2352 = 9042 16#203C/2B

CVLS Speed level up to which check-valve ramp is used 16#2353 = 9043 16#203C/2C

D11D DQ11 activation delay 16#10BB = 4283 16#200C/54

D11H DQ11 holding delay 16#10B1 = 4273 16#200C/4A
D11S DQ11 status (output active level) 16#10A7 = 4263 16#200C/40
D12D DQ12 activation delay 16#10BC = 4284 16#200C/55
D12H DQ12 holding delay 16#10B2 = 4274 16#200C/4B
D12S DQ12 status (output active level) 16#10A8 = 4264 16#200C/41
DECS Deceleration on Stop 16#2354 = 9044 16#203C/2D

DECV Deceleration while check valve is closing (Smooth) 16#2351 = 9041 16#203C/2A

DFL Flow limit deceleration 16#38B2 = 14514 16#2073/F

DM0 Hour and minute of actual fault 16#1C8E = 7310 16#202B/B

DM1 Hour and minute of fault record x (1 is last) 16#1C8F = 7311 16#202B/C
DM2 Hour and minute of fault record x (1 is last) 16#1C90 = 7312 16#202B/D
DM3 Hour and minute of fault record x (1 is last) 16#1C91 = 7313 16#202B/E
DM4 Hour and minute of fault record x (1 is last) 16#1C92 = 7314 16#202B/F
DM5 Hour and minute of fault record x (1 is last) 16#1C93 = 7315 16#202B/10
DM6 Hour and minute of fault record x (1 is last) 16#1C94 = 7316 16#202B/11
DM7 Hour and minute of fault record x (1 is last) 16#1C95 = 7317 16#202B/12
DM8 Hour and minute of fault record x (1 is last) 16#1C96 = 7318 16#202B/13
DM9 Hour and minute of fault record x (1 is last) 16#1C97 = 7319 16#202B/14
DMA Hour and minute of fault record x (1 is last) 16#1E1E = 7710 16#202F/B
DMB Hour and minute of fault record x (1 is last) 16#1E1F = 7711 16#202F/C
DMC Hour and minute of fault record x (1 is last) 16#1E20 = 7712 16#202F/D

# Internal
DMD Hour and minute of fault record x (1 is last) 16#1E21 = 7713 16#202F/E
DME Hour and minute of fault record x (1 is last) 16#1E22 = 7714 16#202F/F
DMF Hour and minute of fault record x (1 is last) 16#1E23 = 7715 16#202F/10
DO11 DO11 assignment 16#13A9 = 5033 16#2014/22
DO12 DO12 assignment 16#13AA = 5034 16#2014/23
DP9 Error code on error n-9 16#1C29 = 7209 16#202A/A
DPA Error code on error n-10 16#1DB0 = 7600 16#202E/1
DPB Error code on error n-11 16#1DB1 = 7601 16#202E/2
DPC Error code on error n-12 16#1DB2 = 7602 16#202E/3
DPD Error code on error n-13 16#1DB3 = 7603 16#202E/4
DPE Error code on error n-14 16#1DB4 = 7604 16#202E/5
DPF Error code on error n-15 16#1DB5 = 7605 16#202E/6
DRT Dual rating state 16#0BC2 = 3010 16#2000/B
DRYD Dry Run error time delay 16#3E50 = 15952 16#2081/35

DRYM Dry Run mode 16#3E4E = 15950 16#2081/33

DRYR Dry Run restart time delay 16#3E51 = 15953 16#2081/36

DRYW Dry Run switch select 16#3E4F = 15951 16#2081/34

DRYX Dry Run Factor 16#3E52 = 15954 16#2081/37

ECI Energy Consumption Indicator 16#3EB5 = 16053 16#2082/36

ECO2 CO2 ratio 16#2A32 = 10802 16#204E/3
ECST kWh Cost 16#2A31 = 10801 16#204E/2
EFY Efficiency 16#3EB2 = 16050 16#2082/33
EFYJ Lowest Efficiency 16#3EB4 = 16052 16#2082/35
EFYK Highest Efficiency 16#3EB3 = 16051 16#2082/34
EP9 State word 16#1C33 = 7219 16#202A/14
EPA State word 16#1DBA = 7610 16#202E/B
EPB State word 16#1DBB = 7611 16#202E/C
EPC State word 16#1DBC = 7612 16#202E/D
EPD State word 16#1DBD = 7613 16#202E/E
EPE State word 16#1DBE = 7614 16#202E/F
EPF State word 16#1DBF = 7615 16#202E/10
EPI Energy Performance Indicator 16#3EB6 = 16054 16#2082/37
EPRW Active Electrical output power estimation 16#0CDD = 3293 16#2002/5E

ERR Ethernet error Code 16#FB0E = 64270

ESAV Energy Saved 16#2A34 = 10804 16#204E/5
ETAD DRIVECOM : Status word 16#219B = 8603 16#2038/4
ETHF Ethernet embedded fault (ETHF) 16#1BE0 = 7136 16#2029/25
ETHL Ethernet error response 16#1B6D = 7021 16#2028/16

F2DL 2 frequency threshold 16#2B04 = 11012 16#2050/D

FPBT Fan operation time 16#0CC0 = 3264 16#2002/41

FEM Flow Estimation mode 16#3E80 = 16000 16#2082/1
FLCM Mode selection 16#3DE0 = 15840 16#2080/29
FLDA Alpha 16#3DE1 = 15841 16#2080/2A

FLH0 Static compensation 16#3DE4 = 15844 16#2080/2D

FLH1 Compensation at point 1 16#3DE2 = 15842 16#2080/2B

FLM Flow limitation mode 16#38B3 = 14515 16#2073/10

FLPD Friction Loss Delta pressure 16#3DE5 = 15845 16#2080/2E
FLQ1 Flow rate Working point 16#3DE3 = 15843 16#2080/2C

# Internal
FS1A Installation flow sensor assignment 16#3D57 = 15703 16#207F/4

FS1C Total Quantity 16#3D65 = 15717 16#207F/12

FS1J LowestFlow 16#3EB8 = 16056 16#2082/39
FS1K Highest flow 16#3EB7 = 16055 16#2082/38
FS1V Installation flow value 16#3D63 = 15715 16#207F/10

FSPD Fan speed 16#0CBF = 3263 16#2002/40

FTDL Low Freq. threshold 16#2B03 = 11011 16#2050/C

FTO Ovld time Before Restart 16#3857 = 14423 16#2072/18

FTU Unld time Before Restart 16#384D = 14413 16#2072/E

GRFL Ground fault activation 16#1B76 = 7030 16#2028/1F

HEG Head Dynamic Gain 16#3E83 = 16003 16#2082/4

HEO Head Static offset 16#3E84 = 16004 16#2082/5

HFPB Response to high flow error 16#3DF7 = 15863 16#2080/40

HFPD High flow delay 16#3DF6 = 15862 16#2080/3F

HFPL High flow Max level 16#3DF5 = 15861 16#2080/3E

HFPM High flow detection activation 16#3DF4 = 15860 16#2080/3D

HS9 Device state 16#1CA1 = 7329 16#202B/1E
HSA Device state 16#1E28 = 7720 16#202F/15
HSB Device state 16#1E29 = 7721 16#202F/16
HSC Device state 16#1E2A = 7722 16#202F/17
HSD Device state 16#1E2B = 7723 16#202F/18
HSE Device state 16#1E2C = 7724 16#202F/19
HSF Device state 16#1E2D = 7725 16#202F/1A
IC0 Input Energy (Wh) 16#2982 = 10626 16#204C/1B
IC1 Input Energy (kWh) 16#2983 = 10627 16#204C/1C
IC2 Input Energy (MWh) 16#2984 = 10628 16#204C/1D
IC3 Input Energy (GWh) 16#2985 = 10629 16#204C/1E
IC4 Input Energy (TWh) 16#2986 = 10630 16#204C/1F
IDLS Energy Saving input assignment 16#3624 = 13860 16#206C/3D
IE0 Real input Energy (Wh) 16#298C = 10636 16#204C/25
IE1 Real input Energy (kWh) 16#298D = 10637 16#204C/26
IE2 Real input Energy (MWh) 16#298E = 10638 16#204C/27
IE3 Real input Energy (GWh) 16#298F = 10639 16#204C/28
IE4 Real input Energy (TWh) 16#2990 = 10640 16#204C/29
IL1I Logic inputs physical image 16#1451 = 5201 16#2016/2

# Internal
INRC NCR current scaling 16#2649 = 9801 16#2044/2
INRL LFA inductance scaling 16#264C = 9804 16#2044/5
INRP NPR power scaling 16#264A = 9802 16#2044/3
INRR RSA resistance scaling 16#264B = 9803 16#2044/4
INRT Torque scaling 16#264D = 9805 16#2044/6
INTI TRA time scaling 16#264E = 9806 16#2044/7
IP9 ETI state word 16#1C3D = 7229 16#202A/1E
IPA ETI state word 16#1DC4 = 7620 16#202E/15
IPAD iPar detected error code 16#FB18 = 64280
IPB ETI state word 16#1DC5 = 7621 16#202E/16
IPC ETI state word 16#1DC6 = 7622 16#202E/17
IPD ETI state word 16#1DC7 = 7623 16#202E/18
IPE ETI state word 16#1DC8 = 7624 16#202E/19
IPF ETI state word 16#1DC9 = 7625 16#202E/1A
IPPB Response to Inlet pressure error 16#3E2A = 15914 16#2081/F
IPPC Inlet pressure maximum compensated pressure 16#3E29 = 15913 16#2081/E

IPPH Inlet pressure high threshold 16#3E27 = 15911 16#2081/C

IPPL Inlet pressure low threshold 16#3E28 = 15912 16#2081/D

IPPM Inlet pressure monitoring mode 16#3E26 = 15910 16#2081/B

IPR Active Electrical input power estimation (100% = drive power) 16#0C92 = 3218 16#2002/13
IPRW Instantaneous active input power 16#0CDE = 3294 16#2002/5F
JACC Anti-Jam forward acceleration 16#3E37 = 15927 16#2081/1C

JACR Anti-Jam reverse acceleration 16#3E38 = 15928 16#2081/1D

JAMB Response to Anti-Jam error 16#3E42 = 15938 16#2081/27

JAMN Maximum allowed consecutive Anti-Jam sequences 16#3E40 = 15936 16#2081/25

JAMT Time interval to define two Anti-Jam sequences as consecutive 16#3E41 = 15937 16#2081/26

JATC Automatic Anti-Jam trigger 16#3E31 = 15921 16#2081/16

JDEC Anti-Jam forward deceleration 16#3E35 = 15925 16#2081/1A

JDER Anti-Jam reverse deceleration 16#3E36 = 15926 16#2081/1B

JETC External Anti-Jam trigger 16#3E30 = 15920 16#2081/15

JFDS Anti-Jam forward speed 16#3E3B = 15931 16#2081/20

JFDT Anti-Jam forward time 16#3E39 = 15929 16#2081/1E

JNBC Anti-Jam cycle number 16#3E3E = 15934 16#2081/23

JP Select the jockey pump 16#3DD6 = 15830 16#2080/1F

JPRD Delay to start the jockey pump 16#3DD8 = 15832 16#2080/21

JPRP Pressure threshold to start the jockey pump 16#3DD7 = 15831 16#2080/20

JPRS Pump reference speed when VSP is selected as jockey pump 16#3DDA = 15834 16#2080/23

JPSP Pressure threshold to stop the jockey pump 16#3DD9 = 15833 16#2080/22

JPWD Delay to wake up the system when pressure feedback stays low 16#3DDB = 15835 16#2080/24

JRVS Anti-Jam reverse speed 16#3E3C = 15932 16#2081/21

JRVT Anti-Jam reverse time 16#3E3A = 15930 16#2081/1F

JTCD Delay before triggering Anti-Jam in torque mode 16#3E34 = 15924 16#2081/19

# Internal
JTCL Anti-Jam torque level 16#3E33 = 15923 16#2081/18

JTCT Inactive time before triggering Anti-Jam 16#3E32 = 15922 16#2081/17

JZST Anti-Jam stop time between forward and reverse 16#3E3D = 15933 16#2081/22

L11D DI11 delay 16#0FAB = 4011 16#200A/C

L12D DI12 delay 16#0FAC = 4012 16#200A/D
L13D DI13 delay 16#0FAD = 4013 16#200A/E
L14D DI14 delay 16#0FAE = 4014 16#200A/F
L15D DI15 delay 16#0FAF = 4015 16#200A/10
L16D DI16 delay 16#0FB0 = 4016 16#200A/11
LALR Last warning 16#325A = 12890 16#2062/5B
LCAC Lifecycle warning configuration 16#3598 = 13720 16#206B/15
LCAD Life cycle Date 16#3599 = 13721 16#206B/16
LCP9 Motor current 16#1C51 = 7249 16#202A/32
LCPA Motor current 16#1DD8 = 7640 16#202E/29
LCPB Motor current 16#1DD9 = 7641 16#202E/2A
LCPC Motor current 16#1DDA = 7642 16#202E/2B
LCPD Motor current 16#1DDB = 7643 16#202E/2C
LCPE Motor current 16#1DDC = 7644 16#202E/2D
LCPF Motor current 16#1DDD = 7645 16#202E/2E
LDD1 Log Distribution Data 1 16#4010 = 16400 16#2086/1
LDD2 Log Distribution Data 2 16#4012 = 16402 16#2086/3
LDD3 Log Distribution Data 3 16#4014 = 16404 16#2086/5
LDD4 Log Distribution Data 4 16#4016 = 16406 16#2086/7
LDEN Logging Distribution State 16#4019 = 16409 16#2086/A
LDM1 Distribution data max value 1 16#4011 = 16401 16#2086/2
LDM2 Distribution data max value 2 16#4013 = 16403 16#2086/4
LDM3 Distribution data max value 3 16#4015 = 16405 16#2086/6
LDM4 Distribution data max value 4 16#4017 = 16407 16#2086/8
LDST Logging Distribution Sample time 16#4018 = 16408 16#2086/9
LFL1 Response to 4-20mA loss on AI1 16#1B69 = 7017 16#2028/12
LFL2 Response to 4-20mA loss on AI2 16#1B5B = 7003 16#2028/4
LFL4 Response to 4-20mA loss on AI4 16#1B66 = 7014 16#2028/F
LFL5 Response to 4-20mA loss on AI5 16#1B6B = 7019 16#2028/14
LOC Current overload threshold 16#3859 = 14425 16#2072/1A

MD0 Year, month and day of actual fault 16#1C84 = 7300 16#202B/1
MD1 Year, month and day of fault record x (1 is last) 16#1C85 = 7301 16#202B/2
MD2 Year, month and day of fault record x (1 is last) 16#1C86 = 7302 16#202B/3
MD3 Year, month and day of fault record x (1 is last) 16#1C87 = 7303 16#202B/4
MD4 Year, month and day of fault record x (1 is last) 16#1C88 = 7304 16#202B/5
MD5 Year, month and day of fault record x (1 is last) 16#1C89 = 7305 16#202B/6
MD6 Year, month and day of fault record x (1 is last) 16#1C8A = 7306 16#202B/7
MD7 Year, month and day of fault record x (1 is last) 16#1C8B = 7307 16#202B/8
MD8 Year, month and day of fault record x (1 is last) 16#1C8C = 7308 16#202B/9
MD9 Year, month and day of fault record x (1 is last) 16#1C8D = 7309 16#202B/A
MDA Year, month and day of fault record x (1 is last) 16#1E14 = 7700 16#202F/1
MDB Year, month and day of fault record x (1 is last) 16#1E15 = 7701 16#202F/2
MDC Year, month and day of fault record x (1 is last) 16#1E16 = 7702 16#202F/3
MDD Year, month and day of fault record x (1 is last) 16#1E17 = 7703 16#202F/4
MDE Year, month and day of fault record x (1 is last) 16#1E18 = 7704 16#202F/5
MDF Year, month and day of fault record x (1 is last) 16#1E19 = 7705 16#202F/6
ME0 Motor energy consumption (Wh) 16#2969 = 10601 16#204C/2
ME1 Motor energy consumption (kWh) 16#296A = 10602 16#204C/3
ME2 Motor energy consumption (MWh) 16#296B = 10603 16#204C/4
ME3 Motor energy consumption (GWh) 16#296C = 10604 16#204C/5
ME4 Motor energy consumption (TWh) 16#296D = 10605 16#204C/6
MOEP Peak output power 16#2991 = 10641 16#204C/2A

# Internal
NFHP No flow high power 16#3E5B = 15963 16#2081/40

NFHS No flow high speed 16#3E5A = 15962 16#2081/3F

NFLP No flow low power 16#3E59 = 15961 16#2081/3E

NFLS No flow low speed 16#3E58 = 15960 16#2081/3D

NSM Number of motor starts 16#0CBC = 3260 16#2002/3D

OC0 Electrical energy consumed by the motor (Wh) 16#296E = 10606 16#204C/7
OC1 Electrical energy consumed by the motor (KWh) 16#296F = 10607 16#204C/8
OC2 Electrical energy consumed by the motor (MWh) 16#2970 = 10608 16#204C/9
OC3 Electrical energy consumed by the motor (GWh) 16#2971 = 10609 16#204C/A
OC4 Electrical energy consumed by the motor (TWh) 16#2972 = 10610 16#204C/B
OCA7 Scan output 7 address 16#3C43 = 15427 16#207C/1C
OCA8 Scan output 8 address 16#3C44 = 15428 16#207C/1D
OCA9 Scan output 9 address 16#3C45 = 15429 16#207C/1E
OCAA Scan output 10 address 16#3C46 = 15430 16#207C/1F
OCAB Scan output 11 address 16#3C47 = 15431 16#207C/20
OCAC Scan output 12 address 16#3C48 = 15432 16#207C/21
OCAD Scan output 13 address 16#3C49 = 15433 16#207C/22
OCAE Scan output 14 address 16#3C4A = 15434 16#207C/23
OCAF Scan output 15 address 16#3C4B = 15435 16#207C/24
OCAG Scan output 16 address 16#3C4C = 15436 16#207C/25
OCT Electrical energy consumed TODAY by the motor (KWh) 16#297E = 10622 16#204C/17

OCY Electrical energy consumed YESTERDAY by the motor (KWh) 16#2980 = 10624 16#204C/19

OE0 Real energy consumption (Wh) 16#2978 = 10616 16#204C/11

OE1 Real energy consumption (kWh) 16#2979 = 10617 16#204C/12
OE2 Real energy consumption (MWh) 16#297A = 10618 16#204C/13
OE3 Real energy consumption (GWh) 16#297B = 10619 16#204C/14
OE4 Real energy consumption (TWh) 16#297C = 10620 16#204C/15
OFI Sinus filter activation 16#0C25 = 3109 16#2001/A
OMA7 Scan input 7 address 16#3C2F = 15407 16#207C/8
OMA8 Scan input 8 address 16#3C30 = 15408 16#207C/9
OMA9 Scan input 9 address 16#3C31 = 15409 16#207C/A
OMAA Scan input 10 address 16#3C32 = 15410 16#207C/B
OMAB Scan input 11 address 16#3C33 = 15411 16#207C/C
OMAC Scan input 12 address 16#3C34 = 15412 16#207C/D
OMAD Scan input 13 address 16#3C35 = 15413 16#207C/E
OMAE Scan input 14 address 16#3C36 = 15414 16#207C/F
OMAF Scan input 15 address 16#3C37 = 15415 16#207C/10
OMAG Scan input 16 address 16#3C38 = 15416 16#207C/11
OP0 Electrical energy produced by the motor (Wh) 16#2973 = 10611 16#204C/C
OP1 Electrical energy produced by the motor (KWh) 16#2974 = 10612 16#204C/D
OP2 Electrical energy produced by the motor (MWh) 16#2975 = 10613 16#204C/E
OP3 Electrical energy produced by the motor (GWh) 16#2976 = 10614 16#204C/F
OP4 Electrical energy produced by the motor (TWh) 16#2977 = 10615 16#204C/10
OPPB Response to Outlet pressure error 16#3DEF = 15855 16#2080/38
OPPD Outlet pressure error delay 16#3DEE = 15854 16#2080/37

OPPH Outlet pressure maximum level 16#3DED = 15853 16#2080/36

OPPL Outlet pressure minimum level 16#3DEC = 15852 16#2080/35

OPPM Outlet pressure monitoring mode 16#3DEA = 15850 16#2080/33

OPPW Outlet pressure digital input assignment 16#3DEB = 15851 16#2080/34

# Internal
OPRW Motor mechanical power estimation 16#0CDC = 3292 16#2002/5D

OTP9 Motor torque 16#1CAB = 7339 16#202B/28

OTPA Motor torque 16#1E32 = 7730 16#202F/1F
OTPB Motor torque 16#1E33 = 7731 16#202F/20
OTPC Motor torque 16#1E34 = 7732 16#202F/21
OTPD Motor torque 16#1E35 = 7733 16#202F/22
OTPE Motor torque 16#1E36 = 7734 16#202F/23
OTPF Motor torque 16#1E37 = 7735 16#202F/24
PCA Pump Curve Activation 16#3D9B = 15771 16#207F/48
PCAH Over-consumption threshold 16#2A62 = 10850 16#204E/33
PCAL Under-consumption threshold 16#2A63 = 10851 16#204E/34
PCAT Over/Under-consumption time delay 16#2A64 = 10852 16#204E/35
PCBH BEP Head 16#3D97 = 15767 16#207F/44
PCBP BEP power 16#3D99 = 15769 16#207F/46
PCBQ Flow at BEP 16#3D98 = 15768 16#207F/45
PCH1 Head entered at y (for HQ curve) 16#3D8D = 15757 16#207F/3A
PCH2 Head entered at y (for HQ curve) 16#3D8E = 15758 16#207F/3B
PCH3 Head entered at y (for HQ curve) 16#3D8F = 15759 16#207F/3C
PCH4 Head entered at y (for HQ curve) 16#3D90 = 15760 16#207F/3D
PCH5 Head entered at y (for HQ curve) 16#3D91 = 15761 16#207F/3E
PCM Select which curve data are managed and will be entered on 16#3D9A = 15770 16#207F/47
PCP1 Mechanical power entered at point y 16#3D92 = 15762 16#207F/3F
PCP2 Mechanical power entered at point y 16#3D93 = 15763 16#207F/40
PCP3 Mechanical power entered at point y 16#3D94 = 15764 16#207F/41
PCP4 Mechanical power entered at point y 16#3D95 = 15765 16#207F/42
PCP5 Mechanical power entered at point y 16#3D96 = 15766 16#207F/43
PCPB Response to pump cycle error 16#3E1F = 15903 16#2081/4
PCPM Pump cycle monitoring mode 16#3E1C = 15900 16#2081/1
PCPN Pump cycle maximum allowed starts 16#3E1D = 15901 16#2081/2

PCPT Pump cycle timeframe 16#3E1E = 15902 16#2081/3

PCQ1 Flow rate entered at point x (for HQ and PQ curves) 16#3D88 = 15752 16#207F/35
PCQ2 Flow rate entered at point x (for HQ and PQ curves) 16#3D89 = 15753 16#207F/36
PCQ3 Flow rate entered at point x (for HQ and PQ curves) 16#3D8A = 15754 16#207F/37
PCQ4 Flow rate entered at point x (for HQ and PQ curves) 16#3D8B = 15755 16#207F/38
PCQ5 Flow rate entered at point x (for HQ and PQ curves) 16#3D8C = 15756 16#207F/39
PCS Pump Characteristics Status 16#3D86 = 15750 16#207F/33
PCSP Pump speed for which curves are entered 16#3D87 = 15751 16#207F/34
PEG Power Dynamic Gain 16#3E85 = 16005 16#2082/6

PEO Power Static offset 16#3E86 = 16006 16#2082/7

PEV1 TPDO1 Event mask 16#17B6 = 6070 16#201E/47

PEV2 TPDO2 Event mask 16#17B7 = 6071 16#201E/48
PEV3 TPDO3 Event mask 16#17B8 = 6072 16#201E/49
PEV4 TPDO4 Event mask 16#17B9 = 6073 16#201E/4A
PFC5 DI5 frequency measured 16#3412 = 13330 16#2067/1F
PFC6 DI6 frequency measured 16#3426 = 13350 16#2067/33
PFEC Pipe Fill Activation Source 16#3DB9 = 15801 16#2080/2
PFHP Pipe Fill pressure level 16#3DBC = 15804 16#2080/5

PFHS Pipe Fill SPeed 16#3DBB = 15803 16#2080/4

PFHT Pipe Fill TiMe 16#3DBA = 15802 16#2080/3

# Internal
PFI5 DI5 frequency filter 16#340C = 13324 16#2067/19

PFI6 DI6 frequency filter 16#3420 = 13344 16#2067/2D

PFL U/F Profile 16#2598 = 9624 16#2042/19

PFM Pipe Fill Activation mode 16#3DB8 = 15800 16#2080/1
PFMB PID feedback error response 16#2E9D = 11933 16#2059/22

PFMD PID feedback error delay 16#2E9C = 11932 16#2059/21

PFMM PID feedback monitoring activation 16#2E9A = 11930 16#2059/1F

PFMR PID feedback range 16#2E9B = 11931 16#2059/20

PHR Output phase rotation 16#3459 = 13401 16#2068/2

PI5J DI5 Min process 16#3414 = 13332 16#2067/21

PI5K DI5 Max process 16#3416 = 13334 16#2067/23

PI6J DI6 Min process 16#3428 = 13352 16#2067/35

PI6K DI6 Max process 16#342A = 13354 16#2067/37

# Internal
PIH5 PulseInput DI5 high frequency 16#340A = 13322 16#2067/17

PIH6 DI6 pulseInput high frequency 16#341E = 13342 16#2067/2B

PIL5 DI5 pulseInput low frequency 16#3408 = 13320 16#2067/15

PIL6 DI6 pulseInput low frequency 16#341C = 13340 16#2067/29

PLFA Pump low flow activation delay 16#3E66 = 15974 16#2081/4B

PLFB Response to pump low flow error 16#3E68 = 15976 16#2081/4D

PLFD Pump low flow error delay 16#3E67 = 15975 16#2081/4C

PLFL Pump low flow minimum level 16#3E64 = 15972 16#2081/49

PLFM Pump low flow monitoring mode 16#3E62 = 15970 16#2081/47

PLFR Pump low flow restart delay 16#3E69 = 15977 16#2081/4E

PLFW Pump low flow digital input assignment 16#3E63 = 15971 16#2081/48
PLFX Pump low flow power factor 16#3E65 = 15973 16#2081/4A

PPOA Priming pump assignment 16#3DCC = 15820 16#2080/15

PPSD Delay before starting the lead pump 16#3DCD = 15821 16#2080/16

PS1A Inlet pressure sensor assignment 16#3D55 = 15701 16#207F/2

# Internal
PS1V Inlet pressure value 16#3D61 = 15713 16#207F/E

PS2A Outlet pressure sensor assignment 16#3D56 = 15702 16#207F/3

PS2V Outlet pressure 16#3D62 = 15714 16#207F/F

R3 R3 assignment 16#138B = 5003 16#2014/4

R3D R3 delay time 16#1093 = 4243 16#200C/2C
R3H R3 holding time 16#107F = 4223 16#200C/18
R3S R3 active level 16#106B = 4203 16#200C/4
R4 R4 assignment 16#138C = 5004 16#2014/5
R4D R4 delay time 16#1094 = 4244 16#200C/2D
R4H R4 holding time 16#1080 = 4224 16#200C/19
R4S R4 active level 16#106C = 4204 16#200C/5
R5 R5 assignment 16#138D = 5005 16#2014/6
R5D R5 delay time 16#1095 = 4245 16#200C/2E
R5H R5 holding time 16#1081 = 4225 16#200C/1A
R5S R5 active level 16#106D = 4205 16#200C/6
R6 R6 assignment 16#138E = 5006 16#2014/7
R6D R6 activation delay time 16#1096 = 4246 16#200C/2F
R6H R6 holding delay time 16#1082 = 4226 16#200C/1B
R6S R6 active level 16#106E = 4206 16#200C/7
RCHT Flow limit Thd disable 16#38B1 = 14513 16#2073/E

RFP9 Motor frequency 16#1C5B = 7259 16#202A/3C

RFPA Motor frequency 16#1DE2 = 7650 16#202E/33
RFPB Motor frequency 16#1DE3 = 7651 16#202E/34
RFPC Motor frequency 16#1DE4 = 7652 16#202E/35
RFPD Motor frequency 16#1DE5 = 7653 16#202E/36
RFPE Motor frequency 16#1DE6 = 7654 16#202E/37
RFPF Motor frequency 16#1DE7 = 7655 16#202E/38
RHO Density 16#3E82 = 16002 16#2082/3
RTD Reference high threshold 16#2B05 = 11013 16#2050/E

RTDL Reference low threshold 16#2B06 = 11014 16#2050/F

RTP9 Run Elapsed time 16#1C65 = 7269 16#202A/46

RTPA Run Elapsed time 16#1DEC = 7660 16#202E/3D
RTPB Run Elapsed time 16#1DED = 7661 16#202E/3E
RTPC Run Elapsed time 16#1DEE = 7662 16#202E/3F
RTPD Run Elapsed time 16#1DEF = 7663 16#202E/40
RTPE Run Elapsed time 16#1DF0 = 7664 16#202E/41
RTPF Run Elapsed time 16#1DF1 = 7665 16#202E/42
SAI4 AI4 physical value without filter 16#14AE = 5294 16#2016/5F
SAI5 AI5 physical value without filter 16#14B2 = 5298 16#2016/63
SAO2 AO2 physical value without filter 16#14B0 = 5296 16#2016/61
SFP9 Switching frequency 16#1CC9 = 7369 16#202B/46
SFPA Switching frequency 16#1E50 = 7760 16#202F/3D
SFPB Switching frequency 16#1E51 = 7761 16#202F/3E
SFPC Switching frequency 16#1E52 = 7762 16#202F/3F
SFPD Switching frequency 16#1E53 = 7763 16#202F/40
SFPE Switching frequency 16#1E54 = 7764 16#202F/41
SFPF Switching frequency 16#1E55 = 7765 16#202F/42
SFS PID start ref frequency 16#2EB3 = 11955 16#2059/38

# Internal
SLBS Sleep boost speed 16#2DEC = 11756 16#2057/39

SLBT Sleep boost time 16#2DED = 11757 16#2057/3A

SLE Sleep offset threshold 16#2DB6 = 11702 16#2057/3

SLFV Estimated pump flow value 16#3E87 = 16007 16#2082/8

SLHV Estimated pump head value 16#3E8C = 16012 16#2082/D

SLNL Sleep flow level 16#2DE8 = 11752 16#2057/35

SLPD Sleep delay 16#2DEB = 11755 16#2057/38

SLPM Sleep Detection mode 16#2DE6 = 11750 16#2057/33

SLPR Sleep power level 16#2DEA = 11754 16#2057/37

SLPW Sleep switch assignment 16#2DE7 = 11751 16#2057/34

SLSL Sleep minimum speed level 16#2DE9 = 11753 16#2057/36

SPD Motor speed 16#2EE4 = 12004 16#205A/5

ST00 Status registers 0 16#3EE4 = 16100 16#2083/1

ST01 Status registers 1 16#3EE5 = 16101 16#2083/2
ST02 Status registers 2 16#3EE6 = 16102 16#2083/3
ST03 Status registers 3 16#3EE7 = 16103 16#2083/4
ST04 Status registers 4 16#3EE8 = 16104 16#2083/5
ST05 Status registers 5 16#3EE9 = 16105 16#2083/6
ST06 Status registers 6 16#3EEA = 16106 16#2083/7
ST07 Status registers 7 16#3EEB = 16107 16#2083/8
ST08 Status registers 8 16#3EEC = 16108 16#2083/9
ST09 Status registers 9 16#3EED = 16109 16#2083/A
ST11 Status registers 11 16#3EEF = 16111 16#2083/C
ST12 Status registers 12 16#3EF0 = 16112 16#2083/D
ST13 Status registers 13 16#3EF1 = 16113 16#2083/E
ST14 Status registers 14 16#3EF2 = 16114 16#2083/F
ST15 Status registers 15 16#3EF3 = 16115 16#2083/10
ST16 Status registers 16 16#3EF4 = 16116 16#2083/11
ST17 Status registers 17 16#3EF5 = 16117 16#2083/12
ST18 Status registers 18 16#3EF6 = 16118 16#2083/13
ST19 Status registers 19 16#3EF7 = 16119 16#2083/14
STOF STOx digital input State 16#3BDB = 15323 16#207B/18
STP1 Motor stall max time 16#2437 = 9271 16#203E/48

STP2 Stall monitoring current level 16#2438 = 9272 16#203E/49

STP3 Stall monitoring frequency level 16#2439 = 9273 16#203E/4A

STPC Stall monitoring activation 16#2436 = 9270 16#203E/47

SUCU Application Currency Unit 16#2EF9 = 12025 16#205A/1A
SUFR Application flow rate Unit (used as default) 16#2EF6 = 12022 16#205A/17
SUPR Application pressure Unit (used as default) 16#2EF5 = 12021 16#205A/16
SUTP Application Temperature Unit (used as default) 16#2EF8 = 12024 16#205A/19
TBR2 Modbus 2 baud rate 16#1787 = 6023 16#201E/18
TDP9 Drive thermal state 16#1CB5 = 7349 16#202B/32
TDPA Drive thermal state 16#1E3C = 7740 16#202F/29
TDPB Drive thermal state 16#1E3D = 7741 16#202F/2A

# Internal
TDPC Drive thermal state 16#1E3E = 7742 16#202F/2B
TDPD Drive thermal state 16#1E3F = 7743 16#202F/2C
TDPE Drive thermal state 16#1E40 = 7744 16#202F/2D
TDPF Drive thermal state 16#1E41 = 7745 16#202F/2E
TFO2 Modbus 2 format 16#1788 = 6024 16#201E/19
TH2A Thermal warning level for AI2 16#33A4 = 13220 16#2066/15

TH2B Response to thermal error for AI2 16#33B8 = 13240 16#2066/29

TH2F Thermal error level for AI2 16#33AE = 13230 16#2066/1F

TH2S Activation of the thermal monitoring on AI2 16#339A = 13210 16#2066/B

TH2V AI2 thermal value 16#33C2 = 13250 16#2066/33

TH3A Thermal warning level for AI3 16#33A5 = 13221 16#2066/16

TH3B Response to thermal error for AI3 16#33B9 = 13241 16#2066/2A

TH3F Thermal error level for AI3 16#33AF = 13231 16#2066/20

TH3S Activation of the thermal monitoring on AI3 16#339B = 13211 16#2066/C

TH3V AI3 thermal value 16#33C3 = 13251 16#2066/34

TH4A Thermal warning level for AI4 16#33A6 = 13222 16#2066/17

TH4B Response to thermal error for AI4 16#33BA = 13242 16#2066/2B

TH4F Thermal error level for AI4 16#33B0 = 13232 16#2066/21

TH4S Activation of the thermal monitoring on AI4 16#339C = 13212 16#2066/D

TH4V AI4 thermal value 16#33C4 = 13252 16#2066/35

TH5A Thermal warning level for AI5 16#33A7 = 13223 16#2066/18

# Internal
TH5B Response to thermal error for AI5 16#33BB = 13243 16#2066/2C

TH5F Thermal error level for AI5 16#33B1 = 13233 16#2066/22

TH5S Activation of the thermal monitoring on AI5 16#339D = 13213 16#2066/E

TH5V AI5 thermal value 16#33C5 = 13253 16#2066/36

THP9 Motor thermal state 16#1C79 = 7289 16#202A/5A

THPA Motor thermal state 16#1E00 = 7680 16#202E/51
THPB Motor thermal state 16#1E01 = 7681 16#202E/52
THPC Motor thermal state 16#1E02 = 7682 16#202E/53
THPD Motor thermal state 16#1E03 = 7683 16#202E/54
THPE Motor thermal state 16#1E04 = 7684 16#202E/55
THPF Motor thermal state 16#1E05 = 7685 16#202E/56
TJP9 IGBT junction temp 16#1CBF = 7359 16#202B/3C
TJPA IGBT junction temp 16#1E46 = 7750 16#202F/33
TJPB IGBT junction temp 16#1E47 = 7751 16#202F/34
TJPC IGBT junction temp 16#1E48 = 7752 16#202F/35
TJPD IGBT junction temp 16#1E49 = 7753 16#202F/36
TJPE IGBT junction temp 16#1E4A = 7754 16#202F/37
TJPF IGBT junction temp 16#1E4B = 7755 16#202F/38
TOCT Type of control 16#2E8F = 11919 16#2059/14

TTOB Ethernet embedded : time-out 16#FB9F = 64415

UIH3 AI3 voltage scaling parameter of 100% 16#1148 = 4424 16#200E/19

# Internal
UIH4 AI4 voltage scaling parameter of 100% 16#1149 = 4425 16#200E/1A

UIH5 AI5 voltage scaling parameter of 100% 16#114A = 4426 16#200E/1B

# Internal
UIL3 AI3 voltage scaling parameter of 0% 16#113E = 4414 16#200E/F

UIL4 AI4 voltage scaling parameter of 0% 16#113F = 4415 16#200E/10

# Internal
UIL5 AI5 voltage scaling parameter of 0% 16#1140 = 4416 16#200E/11

ULP9 DC bus voltage 16#1C6F = 7279 16#202A/50

ULPA DC bus voltage 16#1DF6 = 7670 16#202E/47
ULPB DC bus voltage 16#1DF7 = 7671 16#202E/48
ULPC DC bus voltage 16#1DF8 = 7672 16#202E/49
ULPD DC bus voltage 16#1DF9 = 7673 16#202E/4A
ULPE DC bus voltage 16#1DFA = 7674 16#202E/4B
ULPF DC bus voltage 16#1DFB = 7675 16#202E/4C
UOH2 AQ2 maximum output 16#1218 = 4632 16#2010/21

UOL2 AQ2 minimum output 16#120E = 4622 16#2010/17

VBUS DC bus voltage 16#0CAB = 3243 16#2002/2C

VCB Catch on fly sensitivity 16#0C27 = 3111 16#2001/C
WUPE Wake UP process error level 16#2DF0 = 11760 16#2057/3D

WUPF Wake Up process level 16#2DEF = 11759 16#2057/3C

WUPM Wake Up mode 16#2DEE = 11758 16#2057/3B

PREF Reference power without drive 16#2A30 = 10800 16#204E/1
EPR Active electrical output power 16#0CE1 = 3297 16#2002/62
AV1J AIV1 lowest process 16#11AA = 4522 16#200F/17

# Internal
AV1K AIV1 highest process 16#11B4 = 4532 16#200F/21

SPDM Motor Mechanical speed 16#2EEB = 12011 16#205A/C

DRC9 Channel for reference frequency 16#FB3F = 64319
DRCA Channel for reference frequency 16#FB40 = 64320
DRCB Channel for reference frequency 16#FB41 = 64321
DRCC Channel for reference frequency 16#FB42 = 64322
DRCD Channel for reference frequency 16#FB43 = 64323
DRCE Channel for reference frequency 16#FB44 = 64324
DRCF Channel for reference frequency 16#FB45 = 64325
DCC9 Command channel 16#FB4A = 64330
DCCA Command channel 16#FB4B = 64331
DCCB Command channel 16#FB4C = 64332
DCCZ Command channel 16#FB4D = 64333
DCCD Command channel 16#FB4E = 64334
DCCE Command channel 16#FB4F = 64335
DCCF Command channel 16#FB50 = 64336
PFWU Pipe Fill on wake up 16#3DBE = 15806 16#2080/7
SLPL Sleep pressure level 16#2DF2 = 11762 16#2057/3F

WUPL Wake Up pressure level 16#2DF3 = 11763 16#2057/40

ILCI Cabinet input physical state 16#1453 = 5203 16#2016/4

ILCR Cabinet IO : Logic inputs real image (bit0 = DI50 ...) 16#1454 = 5204 16#2016/5
OLCI Cabinet Ouput physical state 16#145D = 5213 16#2016/E
OLCR Cabinet IO : Logic outputs real image (bit0 = R60 ...) 16#145E = 5214 16#2016/F
PSS Drive Systems pre-settings status 16#1F7C = 8060 16#2032/3D
CBS Circuit breaker status 16#352B = 13611 16#206A/C
BPI0 Power Brick error ID 16#1E78 = 7800 16#2030/1
BPI1 Power Brick error ID 16#1E79 = 7801 16#2030/2
BPI2 Power Brick error ID 16#1E7A = 7802 16#2030/3
BPI3 Power Brick error ID 16#1E7B = 7803 16#2030/4
BPI4 Power Brick error ID 16#1E7C = 7804 16#2030/5
BPI5 Power Brick error ID 16#1E7D = 7805 16#2030/6
BPI6 Power Brick error ID 16#1E7E = 7806 16#2030/7
BPI7 Power Brick error ID 16#1E7F = 7807 16#2030/8
BPI8 Power Brick error ID 16#1E80 = 7808 16#2030/9
BPI9 Power Brick error ID 16#1E81 = 7809 16#2030/A
BPIA Power Brick error ID 16#1E82 = 7810 16#2030/B
BPIB Power Brick error ID 16#1E83 = 7811 16#2030/C
BPIC Power Brick error ID 16#1E84 = 7812 16#2030/D
BPID Power Brick error ID 16#1E85 = 7813 16#2030/E
BPIE Power Brick error ID 16#1E86 = 7814 16#2030/F
BPIF Power Brick error ID 16#1E87 = 7815 16#2030/10
BFI0 AFE power brick error ID 16#1E8C = 7820 16#2030/15

# Internal
 BFI1 AFE power brick error ID 16#1E8D = 7821 16#2030/16
BFI2 AFE power brick error ID 16#1E8E = 7822 16#2030/17
BFI3 AFE power brick error ID 16#1E8F = 7823 16#2030/18
BFI4 AFE power brick error ID 16#1E90 = 7824 16#2030/19
BFI5 AFE power brick error ID 16#1E91 = 7825 16#2030/1A
BFI6 AFE power brick error ID 16#1E92 = 7826 16#2030/1B
BFI7 AFE power brick error ID 16#1E93 = 7827 16#2030/1C
BFI8 AFE power brick error ID 16#1E94 = 7828 16#2030/1D
BFI9 AFE power brick error ID 16#1E95 = 7829 16#2030/1E
BFIA AFE power brick error ID 16#1E96 = 7830 16#2030/1F
BFIB AFE power brick error ID 16#1E97 = 7831 16#2030/20
BFIC AFE power brick error ID 16#1E98 = 7832 16#2030/21
BFID AFE power brick error ID 16#1E99 = 7833 16#2030/22
BFIE AFE power brick error ID 16#1E9A = 7834 16#2030/23
BFIF AFE power brick error ID 16#1E9B = 7835 16#2030/24
ILN Mains current 16#35D7 = 13783 16#206B/54
IQRW Input reactive power 16#0CE2 = 3298 16#2002/63
PWF Input power factor 16#35DA = 13786 16#206B/57
FAC Mains frequency 16#35B6 = 13750 16#206B/33
FSBA AFE : Fan speed 16#35CA = 13770 16#206B/47
FBAT AFE fan operation time 16#35CB = 13771 16#206B/48
FCT Cabinet Fan operation time 16#35CD = 13773 16#206B/4A
THDA AFE : Thermal state 16#9B22 = 39714
BRTH AFE Run time 16#35CF = 13775 16#206B/4C
BPTH AFE power-on time 16#35D1 = 13777 16#206B/4E
BNSA AFE Number of starts 16#35D3 = 13779 16#206B/50
CLIG AFE generator mode 16#35D9 = 13785 16#206B/56

TUNT Autotuning type 16#259A = 9626 16#2042/1B

SPD1 Signed mechanical speed 16#2EEC = 12012 16#205A/D
FDR0 FDR error status 16#FBB0 = 64432
FDS0 FDR operating state 16#FBB1 = 64433
FDA0 FDR action 16#FBB2 = 64434
FDV0 Enable FDR function 16#FBB3 = 64435
INF6 Internal error 6 (Module identification error) information 16#1BE1 = 7137 16#2029/26
HS1 HMI status 16#1C99 = 7321 16#202B/16
HS2 HMI status 16#1C9A = 7322 16#202B/17
HS3 HMI status 16#1C9B = 7323 16#202B/18
HS4 HMI status 16#1C9C = 7324 16#202B/19
HS5 HMI status 16#1C9D = 7325 16#202B/1A
HS6 HMI status 16#1C9E = 7326 16#202B/1B
HS7 HMI status 16#1C9F = 7327 16#202B/1C
HS8 HMI status 16#1CA0 = 7328 16#202B/1D
OTQN Motor torque in Nm 16#0CC4 = 3268 16#2002/45
TQN Computed nominal motor torque 16#25C5 = 9669 16#2042/46

UL1 Mains voltage phase 1-2 16#35B3 = 13747 16#206B/30

UL2 Mains voltage phase 2-3 16#35B4 = 13748 16#206B/31
UL3 Mains voltage phase 3-1 16#35B5 = 13749 16#206B/32
APPT Application selection 16#3D53 = 15699 16#207E/64
MPC Motor parameter choice 16#258E = 9614 16#2042/F
CRFA Internal currents filter time 16#239E = 9118 16#203D/13
RDAE Relative d-axis error in % 16#25CC = 9676 16#2042/4D
TUNU Autotuning usage 16#2593 = 9619 16#2042/14
TCR Level of current for autotuning 16#259B = 9627 16#2042/1C
RCL Alignment rotational current level 16#3668 = 13928 16#206D/1D
RCIR RCI alignment with transformer 16#366A = 13930 16#206D/1F
RCSP RCI maximum output frequency 16#366B = 13931 16#206D/20
BOO Boost 16#3658 = 13912 16#206D/D
FAB Frequency boost 16#3657 = 13911 16#206D/C
TEFF External feed forward assignment 16#23AA = 9130 16#203D/1F

# Internal
MLTO MultiDrive Link communication timeout 16#17C5 = 6085 16#201E/56

TPMM Maximum power in motor mode 16#2400 = 9216 16#203E/11

TPMG Maximum power in generator mode 16#2401 = 9217 16#203E/12

TWO Terminal Modbus: Word order 16#1776 = 6006 16#201E/7

TWO2 Terminal Modbus 2: Word order 16#178A = 6026 16#201E/1B
AV2J AIV2 lowest process 16#11AB = 4523 16#200F/18

AV2K AIV2 highest process 16#11B5 = 4533 16#200F/22

AIV2 AIV2 Image input 16#14A3 = 5283 16#2016/54

# Internal
AIC2 Channel assignment for virtual Analog input AIV2 16#14A4 = 5284 16#2016/55

AV3J AIV3 lowest process 16#11AC = 4524 16#200F/19

AV3K AIV3 highest process 16#11B6 = 4534 16#200F/23

AIV3 AIV3 Image input 16#14A5 = 5285 16#2016/56

# Internal
AIC3 Channel assignment for virtual Analog input AIV3 16#14A6 = 5286 16#2016/57

SLFS Pump system flow 16#3E95 = 16021 16#2082/16

EPRS Pump system electrical power 16#3E97 = 16023 16#2082/18

EFYS Pump system efficiency indicator 16#3E98 = 16024 16#2082/19
ECIS Pump system energy consumption indicator 16#3E99 = 16025 16#2082/1A
EPIS Pump system performance indicator 16#3E9A = 16026 16#2082/1B
MPGN Number of Multipump devices 16#4075 = 16501 16#2087/2

MGID Multipump device ID selection 16#4076 = 16502 16#2087/3

MPST Multipump speed mode selection 16#4078 = 16504 16#2087/5

MDLB Response to Multi-Drive Link communication error 16#40CC = 16588 16#2087/59

MPDB Response to multipump device error 16#40CD = 16589 16#2087/5A

MPDT Multipump master or slave selection 16#40D5 = 16597 16#2087/62

MPFS Pump fixed frequency in distributed mode 16#40D6 = 16598 16#2087/63

BSDH Booster stage/destage flow hysteresis 16#40F5 = 16629 16#2088/1E

LCPN Number of pumps used in level control 16#410A = 16650 16#2088/33

LCDK Maximum delivery height 16#4130 = 16688 16#2088/59

LCDJ Minimum delivery height 16#412F = 16687 16#2088/58

LCQG Disturbance flow compensation 16#4133 = 16691 16#2088/5C

LCDT Level Control stage/destage interval 16#4138 = 16696 16#2088/61

FDR1 FDR error status 16#FBBA = 64442

FDS1 FDR operating state 16#FBBB = 64443
FDA1 FDR action 16#FBBC = 64444
FDV1 Enable FDR function 16#FBBD = 64445
CIC2 Incorrect configuration 2 16#1C16 = 7190 16#2029/5B
ST20 Status registers 20 16#3EF8 = 16120 16#2083/15
SLDP Estimated pump delta pressure value 16#3E8F = 16015 16#2082/10

# Internal
SLDS Pump system delta pressure 16#3E9B = 16027 16#2082/1C

SLDK Estimated pump delta pressure max 16#3E91 = 16017 16#2082/12

SLDJ Estimated pump delta pressure min 16#3E90 = 16016 16#2082/11

BSDT Booster stage/destage time interval 16#40D9 = 16601 16#2088/2

OVMA Overmodulation activation 16#3634 = 13876 16#206C/4D

LPL3 Level to stop third pump 16#4121 = 16673 16#2088/4A

BSDM Booster stage/destage control 16#40EC = 16620 16#2088/15

BSRD Booster stage ramp delay 16#40EF = 16623 16#2088/18

MPLA Lead pump alternation 16#407A = 16506 16#2087/7

IFAB Monitoring circuit B assignment 16#413D = 16701 16#2089/2

IFAC Monitoring circuit C assignment 16#413E = 16702 16#2089/3

IFAA Monitoring circuit A assignment 16#413C = 16700 16#2089/1

P24D Cabinet I/O 24V missing error timeout 16#414A = 16714 16#2089/F

PSST Password status 16#1F72 = 8050 16#2032/33

BSDC Booster stage/destage condition 16#40E2 = 16610 16#2088/B
P1T Pump 1 Type 16#409D = 16541 16#2087/2A
M2CT Mdb NET frames 16#178F = 6031 16#201E/20
CRBA Current loop default gain 16#363E = 13886 16#206C/57
CFRC Response to cabinet circuit C error 16#417E = 16766 16#2089/43
RLS Speed maintain's behavior 16#1B73 = 7027 16#2028/1C
LKOD ON lock time delay 16#9A2F = 39471
FWAP Update firmware 16#FFD7 = 65495
CBSR Response to circuit breaker error 16#352A = 13610 16#206A/B
INXP BACnet instance number 16#19EA = 6634 16#2024/23
CHR Cabinet overheat response 16#35DE = 13790 16#206B/5B

D54D DI54 delay 16#0FCC = 4044 16#200A/2D

DBS Delay to close o/p cont. 16#332D = 13101 16#2065/2
VCDA Vortex control disable DI assignment 16#43B2 = 17330 16#208F/1F
LPL4 Level to stop fourth pump 16#4122 = 16674 16#2088/4B

SSDJ Pump System delta pressure min 16#3EA0 = 16032 16#2082/21

LPL1 Level to stop first pump 16#411F = 16671 16#2088/48

LPL2 Level to stop second pump 16#4120 = 16672 16#2088/49

SSDK Pump System delta pressure max 16#3EA1 = 16033 16#2082/22

R5F Enable relay 5 fallback 16#44C2 = 17602 16#2092/3

AOF2 Enable AQ2 fallback 16#1253 = 4691 16#2010/5C
DLR Download rights 16#1F6A = 8042 16#2032/2B
AOF1 Enable AQ1 fallback 16#10C5 = 4293 16#200C/5E
MPO2 Command assignment for pump 2 16#408A = 16522 16#2087/17

# Internal
MPO3 Command assignment for pump 3 16#408B = 16523 16#2087/18

MPO1 Command assignment for pump 1 16#4089 = 16521 16#2087/16

MPO6 Command assignment for pump 6 16#408E = 16526 16#2087/1B

MPO4 Command assignment for pump 4 16#408C = 16524 16#2087/19

MPO5 Command assignment for pump 5 16#408D = 16525 16#2087/1A

M1CT Mdb frame number 16#177B = 6011 16#201E/C

ETXE Ethernet embedded Tx frames 16#FBA2 = 64418
IDLT Idle mode timeout 16#3626 = 13862 16#206C/3F
IDLM Delay before Energy Saving 16#3625 = 13861 16#206C/3E
FFSD Feed forward stage delay 16#40F3 = 16627 16#2088/1C

APSS System application state 16#3E6D = 15981 16#2081/52

PKTP Package type 16#FFD4 = 65492

AI1L Analog input 1 range 16#1182 = 4482 16#200E/53

LCW1 Level switch 1 assignment 16#410B = 16651 16#2088/34

PSRT Drive Systems pre-settings unlock 16#1F7E = 8062 16#2032/3F
CFRA Response to cabinet circuit A error 16#417C = 16764 16#2089/41
CFRB Response to cabinet circuit B error 16#417D = 16765 16#2089/42
LCTL Tank level 16#4103 = 16643 16#2088/2C

VCP2 Learnt power #2 16#43A9 = 17321 16#208F/16

CRDR Current loop damping coefficient 16#363F = 13887 16#206C/58
D11F Enable DQ11 fallback 16#44C5 = 17605 16#2092/6
PVIS Parameters 16#FA23 = 64035
BCWA Booster working range 16#40E7 = 16615 16#2088/10

P5OT Pump 5 running time 16#40C4 = 16580 16#2087/51

BCS Booster Status 16#40DA = 16602 16#2088/3

IFMA Monitoring circuit A error monitoring type 16#4150 = 16720 16#2089/15

P1OT Pump 1 running time 16#40BC = 16572 16#2087/49

HRFC Extended fault reset activation 16#1BEE = 7150 16#2029/33
ARDE Ethernet rate data 16#FB9D = 64413
VCP5 Learnt power #5 16#43AC = 17324 16#208F/19

# Internal
VCP4 Learnt power #4 16#43AB = 17323 16#208F/18
VCP1 Learnt power #1 16#43A8 = 17320 16#208F/15
VCP3 Learnt power #3 16#43AA = 17322 16#208F/17
FWST Firmware Update Status 16#FFDB = 65499
VCS2 Learnt speed #2 16#439F = 17311 16#208F/C
D58D DI58 delay 16#0FD0 = 4048 16#200A/31
FS2V Pump flow value 16#3D64 = 15716 16#207F/11

VCFD Vortex control error delay 16#43B8 = 17336 16#208F/25

FS2A Pump flow sensor assignment 16#3D58 = 15704 16#207F/5

RHOC Liquid density used to characterize pump 16#3D9C = 15772 16#207F/49

MPS MultiPump function state 16#407D = 16509 16#2087/A

LCLS Level control low speed 16#40FB = 16635 16#2088/24

MPID Pump ready delay 16#407B = 16507 16#2087/8

P3NS Pump 3 number of starts 16#40B4 = 16564 16#2087/41

RTHH Motor run time 16#0CCA = 3274 16#2002/4B

LCNB Level control disturbed level sample size 16#411B = 16667 16#2088/44
P5NS Pump 5 number of starts 16#40B8 = 16568 16#2087/45
PKVS Package version 16#FFD3 = 65491
P1NS Pump 1 number of starts 16#40B0 = 16560 16#2087/3D
MPI3 Pump 3 ready to operate assignment 16#4081 = 16513 16#2087/E

MPI4 Pump 4 ready to operate assignment 16#4082 = 16514 16#2087/F

MPI5 Pump 5 ready to operate assignment 16#4083 = 16515 16#2087/10

MPI6 Pump 6 ready to operate assignment 16#4084 = 16516 16#2087/11

ETXO Ethernet option Tx frames 16#FBD4 = 64468

R60S R60 active at 16#10CC = 4300 16#200D/1
R60D R60 delay time 16#10CD = 4301 16#200D/2
LFR1 Modbus reference frequency 16#2149 = 8521 16#2037/16
LFR2 CANopen reference frequency 16#214A = 8522 16#2037/17
LFR3 Communication module reference frequency 16#214B = 8523 16#2037/18
LFR5 Embedded ethernet reference frequency 16#214D = 8525 16#2037/1A
VCFB Vortex control error behavior 16#43B7 = 17335 16#208F/24
P2NS Pump 2 number of starts 16#40B2 = 16562 16#2087/3F
BSS Booster stage speed 16#40E3 = 16611 16#2088/C

BSD Booster stage delay 16#40E5 = 16613 16#2088/E

DCRF DC bus ripple estimated frequency 16#363A = 13882 16#206C/53

EERE Ethernet embedded error frames 16#FBA4 = 64420
MMN BACnet max master module address 16#19E8 = 6632 16#2024/21
R64D R64 delay time 16#10D9 = 4313 16#200D/E
P6OT Pump 6 running time 16#40C6 = 16582 16#2087/53
MPPC Pump cycling mode 16#4079 = 16505 16#2087/6

NMTS Canopen NMT state 16#17A9 = 6057 16#201E/3A

EMDT Energy Dashboard 16#FA31 = 64049
P2S Pump 2 State 16#40A8 = 16552 16#2087/35
TFDA Motor winding A delay after Run 16#416B = 16747 16#2089/30
R61S R61 active at 16#10CF = 4303 16#200D/4
R61D R61 delay time 16#10D0 = 4304 16#200D/5
R61H R61 holding time 16#10D1 = 4305 16#200D/6
RP24 Receive PDO2-4 16#32E0 = 13024 16#2064/19

# Internal
RP21 Receive PDO2-1 16#32DD = 13021 16#2064/16
RP22 Receive PDO2-2 16#32DE = 13022 16#2064/17
RP23 Receive PDO2-3 16#32DF = 13023 16#2064/18
MDPC MultiDrive Link pairing code 16#40A5 = 16549 16#2087/32

CMDT Control Screen selection 16#FA58 = 64088

CMDC Command channel 16#FA28 = 64040
CBEP Circuit breaker start pulse activated 16#352C = 13612 16#206A/D
D12F Enable DQ12 fallback 16#44C6 = 17606 16#2092/7
LCLF Level control system friction loss rate 16#411C = 16668 16#2088/45
TFDB Motor winding B delay after Run 16#416C = 16748 16#2089/31
TFDC Motor bearing A delay after Run 16#416D = 16749 16#2089/32
TFDD Motor bearing B delay after Run 16#416E = 16750 16#2089/33
RP32 Receive PDO3-2 16#32CA = 13002 16#2064/3
FOR Frame format 16#19CC = 6604 16#2024/5
LAC Access level 16#0BBE = 3006 16#2000/7
AFFL Fieldbus communication loss fallback channel 16#1B70 = 7024 16#2028/19

CBT3 Circuit breaker switch-on delay 16#3530 = 13616 16#206A/11

CBT2 Circuit breaker stop pulse time 16#352F = 13615 16#206A/10
VCKP Vortex control proportional gain 16#43B5 = 17333 16#208F/22
LCKP Level control PI proportional gain 16#413A = 16698 16#2088/63
R62D R62 delay time 16#10D3 = 4307 16#200D/8
R62H R62 holding time 16#10D4 = 4308 16#200D/9
COM1 Modbus com. status 16#FA2F = 64047
COM2 Mdb com stat 16#FA30 = 64048
P3S Pump 3 State 16#40A9 = 16553 16#2087/36
P3T Pump 3 Type 16#409F = 16543 16#2087/2C
RP34 Receive PDO3-4 16#32CC = 13004 16#2064/5
RP33 Receive PDO3-3 16#32CB = 13003 16#2064/4
RP31 Receive PDO3-1 16#32C9 = 13001 16#2064/2
CBDP Circuit breaker stop pulse activated 16#352D = 13613 16#206A/E
REC1 RX error counter 16#17AB = 6059 16#201E/3C
R62S R62 active at 16#10D2 = 4306 16#200D/7
PPFD Primed condition delay 16#3DD1 = 15825 16#2080/1A

R6F Enable relay 6 fallback 16#44C3 = 17603 16#2092/4

AV3A AIV3 assignment 16#12FF = 4863 16#2012/40

R63 R63 assignment 16#13B3 = 5043 16#2014/2C

R62 R62 assignment 16#13B2 = 5042 16#2014/2B
R61 R61 assignment 16#13B1 = 5041 16#2014/2A
R60 R60 assignment 16#13B0 = 5040 16#2014/29
AV3T Configuration of virtual analog input AIV3 16#14AA = 5290 16#2016/5B
R66 R66 assignment 16#13B6 = 5046 16#2014/2F
R65 R65 assignment 16#13B5 = 5045 16#2014/2E
R64 R64 assignment 16#13B4 = 5044 16#2014/2D
VCTI Vortex control integral constant time 16#43B6 = 17334 16#208F/23
P4T Pump 4 Type 16#40A0 = 16544 16#2087/2D
P4S Pump 4 State 16#40AA = 16554 16#2087/37
BCOA Booster override range 16#40E8 = 16616 16#2088/11

TEC1 TX error counter 16#17AA = 6058 16#201E/3B

IPAT iPar autosave timer 16#FB16 = 64278
IPAV iPar service activation 16#FB12 = 64274
IPAS iPar autosave activation 16#FB13 = 64275
MPI1 Pump 1 ready to operate assignment 16#407F = 16511 16#2087/C

MPI2 Pump 2 ready to operate assignment 16#4080 = 16512 16#2087/D

# Internal
R63S R63 active at 16#10D5 = 4309 16#200D/A
R63H R63 holding time 16#10D7 = 4311 16#200D/C
R63D R63 delay time 16#10D6 = 4310 16#200D/B
KLCK Display terminal locked 16#FA12 = 64018
PMDT Pump Screen 16#FA57 = 64087
LKOR ON lock response 16#9A2E = 39470
TP21 Transmit PDO2-1 16#32E7 = 13031 16#2064/20
M1EC Mdb NET CRC errors 16#177A = 6010 16#201E/B
AV2A AIV2 assignment 16#12FE = 4862 16#2012/3F

LCTK Full Tank level sensor value 16#4102 = 16642 16#2088/2B

LCTJ Empty Tank level sensor value 16#4101 = 16641 16#2088/2A
LCTI Level control PI integral time 16#4139 = 16697 16#2088/62
LCTV Tank volume to be filled or emptied 16#40FA = 16634 16#2088/23
AV2T Configuration of virtual analog input AIV2 16#14A8 = 5288 16#2016/59
LPL5 Level to stop fifth pump 16#4123 = 16675 16#2088/4C

LPL6 Level to stop sixth pump 16#4124 = 16676 16#2088/4D

VLIM Output voltage limitation 16#3637 = 13879 16#206C/50

LCW2 Level switch 2 assignment 16#410C = 16652 16#2088/35
WUPD Wake Up delay 16#2DF4 = 11764 16#2057/41
WPXF Pump operating point filter 16#3EBC = 16060 16#2082/3D

R64S R64 active at 16#10D8 = 4312 16#200D/D

R64H R64 holding time 16#10DA = 4314 16#200D/F
CFDC Cabinet circuit C delay after Run 16#416A = 16746 16#2089/2F
CFDB Cabinet circuit B delay after Run 16#4169 = 16745 16#2089/2E
CFDA Cabinet circuit A delay after Run 16#4168 = 16744 16#2089/2D
P4NS Pump 4 number of starts 16#40B6 = 16566 16#2087/43
P5T Pump 5 Type 16#40A1 = 16545 16#2087/2E
PLID Lead pump 16#40D4 = 16596 16#2087/61
D53D DI53 delay 16#0FCB = 4043 16#200A/2C
MIF BACnet maximum information frames 16#19E9 = 6633 16#2024/22
IM00 IP mode Ethernet Embd 16#FB90 = 64400
CBT1 Circuit breaker start pulse time 16#352E = 13614 16#206A/F
CBT5 Circuit breaker Disable stop delay 16#3532 = 13618 16#206A/13
CBT4 Circuit breaker switch-off delay 16#3531 = 13617 16#206A/12
RP14 Receive PDO1-4 16#32F4 = 13044 16#2064/2D
RP11 Receive PDO1-1 16#32F1 = 13041 16#2064/2A
RP13 Receive PDO1-3 16#32F3 = 13043 16#2064/2C
RP12 Receive PDO1-2 16#32F2 = 13042 16#2064/2B
SCD2 Dual command channel 2 activation 16#20EA = 8426 16#2036/1B
SCD1 Dual command channel 1 activation 16#20E9 = 8425 16#2036/1A
MMID Active master ID 16#40AF = 16559 16#2087/3C
IPM IP mode 16#FAFA = 64250
LCW4 Level switch 4 assignment 16#410E = 16654 16#2088/37
P5S Pump 5 State 16#40AB = 16555 16#2087/38
LCRX Level control random factor 16#40F9 = 16633 16#2088/22

LKOS ON lock assignment 16#9A30 = 39472

R4F Enable relay 4 fallback 16#44C1 = 17601 16#2092/2
D56D DI56 delay 16#0FCE = 4046 16#200A/2F

# Internal
LCW3 Level switch 3 assignment 16#410D = 16653 16#2088/36
CFAC Cabinet circuit C assignment 16#4142 = 16706 16#2089/7
LCW6 Level switch 6 assignment 16#4110 = 16656 16#2088/39
LCW5 Level switch 5 assignment 16#410F = 16655 16#2088/38
MPFB Response to Multipump error 16#407C = 16508 16#2087/9

INLF AI loss inhibition 16#1B72 = 7026 16#2028/1B

TLP Fieldbus timeout 16#19CD = 6605 16#2024/6
TFCR BACnet received frame counter 16#1A05 = 6661 16#2024/3E
TFCT BACnet transmitted frame counter 16#1A08 = 6664 16#2024/41
LCWH Maximum level switch assignment 16#40FF = 16639 16#2088/28
LCWL Minimum level switch assignment 16#40FE = 16638 16#2088/27
AV1A AIV1 assignment 16#12FD = 4861 16#2012/3E

AV1T Configuration of virtual analog input AIV1 16#14A7 = 5287 16#2016/58

FFTG Feed forward disturbance time 16#2ED3 = 11987 16#2059/58

P6S Pump 6 State 16#40AC = 16556 16#2087/39

P4OT Pump 4 running time 16#40C2 = 16578 16#2087/4F
R60H R60 holding time 16#10CE = 4302 16#200D/3
NBRP Number of RX PDO 16#330F = 13071 16#2064/48
R65S R65 active at 16#10DB = 4315 16#200D/10
R65H R65 holding time 16#10DD = 4317 16#200D/12
R65D R65 delay time 16#10DC = 4316 16#200D/11
IM10 Ethernet option IP mode 16#FBC2 = 64450
LRL4 Level to start fourth pump 16#4118 = 16664 16#2088/41

LRL5 Level to start fifth pump 16#4119 = 16665 16#2088/42

LRL2 Level to start second pump 16#4116 = 16662 16#2088/3F

LRL1 Level to start first pump 16#4115 = 16661 16#2088/3E

PPWA Primed switch assignment 16#3DCF = 15823 16#2080/18

TFRC Response to motor bearing A error 16#4181 = 16769 16#2089/46
TFRD Response to motor bearing B error 16#4182 = 16770 16#2089/47
D52D DI52 delay 16#0FCA = 4042 16#200A/2B
NBTP Number of TX PDO 16#330E = 13070 16#2064/47
ERXO Ethernet option Rx frames 16#FBD2 = 64466
MPSN Number of staged pumps 16#40CF = 16591 16#2087/5C

P1S Pump 1 State 16#40A7 = 16551 16#2087/34

ERXE Ethernet embedded Rx frames 16#FBA0 = 64416
BDBS Booster destage bypass speed 16#40F0 = 16624 16#2088/19

BDBT Booster destage bypass time 16#40F1 = 16625 16#2088/1A

P6T Pump 6 Type 16#40A2 = 16546 16#2087/2F

LCDF Level control flow stabilization threshold 16#4125 = 16677 16#2088/4E
BCPN Booster number of pumps 16#40DB = 16603 16#2088/4
PPIL Primed Inlet pressure level 16#3DD0 = 15824 16#2080/19

MPPN Number of pumps 16#4077 = 16503 16#2087/4

RCA Output contactor fdbk 16#332F = 13103 16#2065/4

IPPW Inlet pressure digital input assignment 16#3E2C = 15916 16#2081/11
IPPD Inlet pressure error delay 16#3E2D = 15917 16#2081/12
MPAN Number of available pumps 16#40CE = 16590 16#2087/5B

TP13 Transmit PDO1-3 16#32FD = 13053 16#2064/36

TP12 Transmit PDO1-2 16#32FC = 13052 16#2064/35
TP11 Transmit PDO1-1 16#32FB = 13051 16#2064/34

# Internal
TP14 Transmit PDO1-4 16#32FE = 13054 16#2064/37
R66D R66 delay time 16#10DF = 4319 16#200D/14
R66H R66 holding time 16#10E0 = 4320 16#200D/15
R66S R66 active at 16#10DE = 4318 16#200D/13
IFAD Monitoring circuit D assignment 16#413F = 16703 16#2089/4

D51D DI51 delay 16#0FC9 = 4041 16#200A/2A

SSFJ Pump System flow min 16#3E9E = 16030 16#2082/1F

SSFK Pump System flow max 16#3E9F = 16031 16#2082/20

VCM Vortex control activation 16#4394 = 17300 16#208F/1

ST1C RSTP option module configuration 16#45F2 = 17906 16#2095/7
ST1A RSTP option module actual configuration 16#45F1 = 17905 16#2095/6
P2OT Pump 2 running time 16#40BE = 16574 16#2087/4B
EERO Ethernet option error frames 16#FBD6 = 64470
ST1V RSTP option module modification status 16#45F4 = 17908 16#2095/9
ST1S RSTP option module service status 16#45F3 = 17907 16#2095/8
FFDD Feed forward destage delay 16#40F4 = 16628 16#2088/1D

R2F Enable relay 2 fallback 16#10C3 = 4291 16#200C/5C

LCNT Level control sensor type 16#40F7 = 16631 16#2088/20
BDCL Maximum braking current level 16#3746 = 14150 16#206F/33
TFAA Motor winding A assignment 16#4143 = 16707 16#2089/8
TFAC Motor bearing A assignment 16#4145 = 16709 16#2089/A
TFAB Motor winding B assignment 16#4144 = 16708 16#2089/9
TFAD Motor bearing B assignment 16#4146 = 16710 16#2089/B
BPHH AFE power-On time 16#35BE = 13758 16#206B/3B
LCQF Level control disturbed flow filter time 16#411E = 16670 16#2088/47
LCQT Disturbance flow response time 16#4134 = 16692 16#2088/5D

TQNP Nameplate nominal motor torque 16#25D9 = 9689 16#2042/5A

TQNO Expert nominal motor torque 16#25D8 = 9688 16#2042/59
TP24 Transmit PDO2-4 16#32EA = 13034 16#2064/23
TP22 Transmit PDO2-2 16#32E8 = 13032 16#2064/21
TP23 Transmit PDO2-3 16#32E9 = 13033 16#2064/22
TQNC Nominal motor torque scaling 16#25D7 = 9687 16#2042/58
BCKL Red Backlight 16#FA13 = 64019

# Internal
AI4L Analog input 4 range 16#1185 = 4485 16#200E/56

FFG Feed forward disturbance gain 16#2ED2 = 11986 16#2059/57

CFAA Cabinet circuit A assignment 16#4140 = 16704 16#2089/5

CFAB Cabinet circuit B assignment 16#4141 = 16705 16#2089/6
FWER Firmware Update error code 16#FFD6 = 65494
BDS Booster destage speed 16#40E4 = 16612 16#2088/D

IFRA Response to monitoring circuit A error 16#4178 = 16760 16#2089/3D

P6NS Pump 6 number of starts 16#40BA = 16570 16#2087/47

BDRD Booster destage ramp delay 16#40F2 = 16626 16#2088/1B

MDT HMI displayed value type 16#FA20 = 64032

D50D DI50 delay 16#0FC8 = 4040 16#200A/29
LCPM Level control stop mode 16#40FC = 16636 16#2088/25
LCFV Level control real tank level 16#411D = 16669 16#2088/46
MPME Multi-pump master enable assignment 16#4088 = 16520 16#2087/15

DCRA DC bus ripple amplitude 16#3639 = 13881 16#206C/52

IFDD Monitoring circuit D delay after Run 16#4167 = 16743 16#2089/2C

IFDA Monitoring circuit A delay after Run 16#4164 = 16740 16#2089/29

IFDC Monitoring circuit C delay after Run 16#4166 = 16742 16#2089/2B

IFDB Monitoring circuit B delay after Run 16#4165 = 16741 16#2089/2A

R3F Enable relay 3 fallback 16#44C0 = 17600 16#2092/1

TP31 Transmit PDO3-1 16#32D3 = 13011 16#2064/C
TP33 Transmit PDO3-3 16#32D5 = 13013 16#2064/E
TP32 Transmit PDO3-2 16#32D4 = 13012 16#2064/D
TP34 Transmit PDO3-4 16#32D6 = 13014 16#2064/F
IFRD Response to monitoring circuit D error 16#417B = 16763 16#2089/40

IFI Use of an input filer 16#3640 = 13888 16#206C/59

# Internal
AI5L Analog input 5 range 16#1186 = 4486 16#200E/57

LHL4 Level to reach fourth pump high speed 16#412C = 16684 16#2088/55

LHL5 Level to reach fifth pump high speed 16#412D = 16685 16#2088/56

LHL6 Level to reach sixth pump high speed 16#412E = 16686 16#2088/57

LHL1 Level to reach first pump high speed 16#4129 = 16681 16#2088/52

LHL2 Level to reach second pump high speed 16#412A = 16682 16#2088/53

LRL3 Level to start third pump 16#4117 = 16663 16#2088/40

BRHH AFE Run time 16#35BC = 13756 16#206B/39

D57D DI57 delay 16#0FCF = 4047 16#200A/30
VCCS Vortex control status 16#4395 = 17301 16#208F/2
FCSI Source configuration 16#FA51 = 64081
LCFB Level control error response 16#40FD = 16637 16#2088/26
RFCC Channel for reference frequency 16#FA29 = 64041
VCS4 Learnt speed #4 16#43A1 = 17313 16#208F/E
SLFK Estimated pump flow max 16#3E89 = 16009 16#2082/A

SLFJ Estimated pump flow min 16#3E88 = 16008 16#2082/9

VCS1 Learnt speed #1 16#439E = 17310 16#208F/B

PTHH Power-on time 16#0CCC = 3276 16#2002/4D
BSBT Booster stage bypass time 16#40EE = 16622 16#2088/17

TFRA Response to motor winding A error 16#417F = 16767 16#2089/44

TFMD Motor bearing B monitoring 16#415A = 16730 16#2089/1F
TFMA Motor winding A monitoring 16#4157 = 16727 16#2089/1C
TFRB Response to motor winding B error 16#4180 = 16768 16#2089/45
TFMC Motor bearing A monitoring 16#4159 = 16729 16#2089/1E
TFMB Motor winding B monitoring 16#4158 = 16728 16#2089/1D
IFMB Monitoring circuit B error monitoring type 16#4151 = 16721 16#2089/16

IFMC Monitoring circuit C error monitoring type 16#4152 = 16722 16#2089/17

IPAE iPar service status 16#FB17 = 64279

# Internal
IPAF iPar response to detected error 16#FB15 = 64277
IFMD Monitoring circuit D error monitoring type 16#4153 = 16723 16#2089/18

MPPD Multi-pump power-on master delay 16#40A6 = 16550 16#2087/33

LCSV Level sensor value 16#3D69 = 15721 16#207F/16

LCST Level control strategy 16#40F8 = 16632 16#2088/21
LCSA Level sensor assignment 16#3D68 = 15720 16#207F/15

AI2L Analog input 2 range 16#1183 = 4483 16#200E/54

CRB Current loop configured gain 16#363D = 13885 16#206C/56

EFC BACnet incorrect frame counter 16#1A06 = 6662 16#2024/3F
LCS Level Control Status 16#4100 = 16640 16#2088/29

M2EC Mdb NET CRC errors 16#178E = 6030 16#201E/1F

LCM Level control mode 16#40F6 = 16630 16#2088/1F
PNTD Next Destaged pump 16#40D3 = 16595 16#2087/60
PNTS Next Staged pump 16#40D2 = 16594 16#2087/5F
SCSI Save configuration 16#FA50 = 64080
DCRC DC bus ripple configuration 16#363C = 13884 16#206C/55
VCLM Curve learning mode 16#4396 = 17302 16#208F/3
VCLA Learning activation assignment 16#4398 = 17304 16#208F/5
FWCL Abort firmware update 16#FFD5 = 65493
DCRD DC bus ripple time counter 16#363B = 13883 16#206C/54
VCLS Curve learning status 16#4397 = 17303 16#208F/4
VCAX Power vs Speed curve sensitivity gain 16#43B3 = 17331 16#208F/20
RCRP RCI round number 16#366C = 13932 16#206D/21
D59D DI59 delay 16#0FD1 = 4049 16#200A/32
RWPO Reset ethernet option password 16#FBD9 = 64473

RWPE Reset ethernet embedded password 16#FBA7 = 64423

CFMA Cabinet circuit A monitoring type 16#4154 = 16724 16#2089/19

CFMB Cabinet circuit B monitoring type 16#4155 = 16725 16#2089/1A
CFMC Cabinet circuit C monitoring type 16#4156 = 16726 16#2089/1B
P3OT Pump 3 running time 16#40C0 = 16576 16#2087/4D
MPSA Pump System architecture selection 16#4074 = 16500 16#2087/1

BCM Booster Control 16#40D8 = 16600 16#2088/1

MPCP Pump auto cycling 16#40D7 = 16599 16#2087/64

# Internal
TAFI DC injection angle 16#2903 = 10499 16#204A/64
ICFG iPAR local configuration 16#FB14 = 64276
BDD Booster destage delay 16#40E6 = 16614 16#2088/F

BDF Booster destage flow 16#40E9 = 16617 16#2088/12

BSBS Booster stage bypass speed 16#40ED = 16621 16#2088/16

MPMD Multi-pump master activation delay 16#409C = 16540 16#2087/29

MPMA Multi-pump master activated assignment 16#4092 = 16530 16#2087/1F

LCVF Level control level filter time 16#4135 = 16693 16#2088/5E

VCST Learning stabilization time 16#439B = 17307 16#208F/8
IFRC Response to monitoring circuit C error 16#417A = 16762 16#2089/3F

IFRB Response to monitoring circuit B error 16#4179 = 16761 16#2089/3E

OCC Output contactor control assignment 16#3330 = 13104 16#2065/5

VCSJ Low learning speed 16#4399 = 17305 16#208F/6
VCSK High learning speed 16#439A = 17306 16#208F/7
VCS5 Learnt speed #5 16#43A2 = 17314 16#208F/F
VCS3 Learnt speed #3 16#43A0 = 17312 16#208F/D
AI3L Analog input 3 range 16#1184 = 4484 16#200E/55

R1F Enable relay 1 fallback 16#10C2 = 4290 16#200C/5B

P2T Pump 2 Type 16#409E = 16542 16#2087/2B
D55D DI55 delay 16#0FCD = 4045 16#200A/2E
VCAY Power vs Speed curve sensitivity offset 16#43B4 = 17332 16#208F/21
DAS Delay to open contactor 16#332E = 13102 16#2065/3
LRL6 Level to start sixth pump 16#411A = 16666 16#2088/43

ULR Upload rights 16#1F69 = 8041 16#2032/2A

LHL3 Level to reach third pump high speed 16#412B = 16683 16#2088/54

RTC Alignment rotational torque current 16#3669 = 13929 16#206D/1E

# Internal
 CIP path Link Category Access Type
16#8B/01/69 = 139/01/105 Control parameters R/W WORD (BitString16)
16#8B/01/66 = 139/01/102 Control parameters R/W WORD (BitString16)
16#70/01/79 = 112/01/121 RPR Control parameters R/W WORD (Enumeration)

16#8C/01/03 = 140/01/03 Setpoint parameters R/W INT (Signed16)

16#8B/01/67 = 139/01/103 Setpoint parameters R/W INT (Signed16)
16#8B/01/68 = 139/01/104 Setpoint parameters R/W UINT (Unsigned16)
16#7B/01/52 = 123/01/82 Setpoint parameters R/W INT (Signed16)
16#9C/01/20 = 156/01/32 Setpoint parameters R/W UINT (Unsigned16)

16#71/01/02 = 113/01/02 Status parameters R WORD (BitString16)

16#71/01/29 = 113/01/41 HMIS Status parameters R WORD (Enumeration)

16#71/01/07 = 113/01/07 Status parameters R WORD (BitString16)

16#8B/01/2A = 139/01/42 Status parameters R WORD (BitString16)
16#8B/01/2B = 139/01/43 Status parameters R WORD (BitString16)
16#89/01/15 = 137/01/21 CNFS Status parameters R WORD (Enumeration)
16#91/01/12 = 145/01/18 STUN Status parameters R WORD (Enumeration)

16#91/01/2E = 145/01/46 SMOT Status parameters R WORD (Enumeration)

16#8C/01/05 = 140/01/05 Actual values parameters R INT (Signed16)
16#71/01/03 = 113/01/03 Actual values parameters R INT (Signed16)
16#71/01/06 = 113/01/06 Actual values parameters R INT (Signed16)
16#71/01/05 = 113/01/05 Actual values parameters R UINT (Unsigned16)

16#71/01/09 = 113/01/09 Actual values parameters R UINT (Unsigned16)

16#71/01/0C = 113/01/12 Actual values parameters R INT (Signed16)
16#8C/01/06 = 140/01/06 Reference parameters R INT (Signed16)
16#8C/01/2A = 140/01/42 Reference parameters R INT (Signed16)
16#71/01/04 = 113/01/04 Reference parameters R INT (Signed16)

16#8E/01/16 = 142/01/22 Reference parameters R INT (Signed16)

16#9C/01/B7 = 156/01/183 Reference parameters R UINT (Unsigned16)

16#9C/01/B6 = 156/01/182 Reference parameters R UINT (Unsigned16)

16#9C/01/B5 = 156/01/181 Reference parameters R INT (Signed16)

16#9C/01/B8 = 156/01/184 Reference parameters R INT (Signed16)
16#71/01/08 = 113/01/08 Measurement parameters R UINT (Unsigned16)
16#71/01/0A = 113/01/10 Measurement parameters R UINT (Unsigned16)
16#91/01/1F = 145/01/31 Measurement parameters R UINT (Unsigned16)

16#71/01/2D = 113/01/45 Measurement parameters R/WS UINT (Unsigned32)

16#71/01/2F = 113/01/47 Measurement parameters R/WS UINT (Unsigned32)
16#7B/01/03 = 123/01/03 I/O parameters R WORD (BitString16)
16#7B/01/0D = 123/01/13 I/O parameters R/W WORD (BitString16)
16#7B/01/2B = 123/01/43 I/O parameters R INT (Signed16)
16#7B/01/21 = 123/01/33 I/O parameters R INT (Signed16)
16#7B/01/2C = 123/01/44 I/O parameters R INT (Signed16)
16#7B/01/22 = 123/01/34 I/O parameters R INT (Signed16)

# Internal
16#7B/01/2D = 123/01/45 I/O parameters R INT (Signed16)
16#7B/01/23 = 123/01/35 I/O parameters R INT (Signed16)
16#7B/01/48 = 123/01/72 I/O parameters R/W INT (Signed16)
16#7B/01/3E = 123/01/62 I/O parameters R/W INT (Signed16)
16#8C/01/07 = 140/01/07 ERRD Fault parameters R WORD (BitString16)
16#84/01/7A = 132/01/122 LFT Fault parameters R WORD (Enumeration)
16#84/01/83 = 132/01/131 Fault parameters R/WS WORD (BitString16)
16#84/01/85 = 132/01/133 Fault parameters R/W UINT (Unsigned16)

16#84/01/87 = 132/01/135 Fault parameters R/W UINT (Unsigned16)

16#85/01/C2 = 133/01/194 Fault parameters R UINT (Unsigned16)

16#85/01/01 = 133/01/01 LFT History parameters R WORD (Enumeration)
16#85/01/47 = 133/01/71 History parameters R UINT (Unsigned16)
16#85/01/29 = 133/01/41 History parameters R INT (Signed16)
16#85/01/33 = 133/01/51 History parameters R INT (Signed16)
16#85/01/51 = 133/01/81 History parameters R UINT (Unsigned16)
16#85/01/0B = 133/01/11 History parameters R WORD (BitString16)
16#85/01/15 = 133/01/21 History parameters R WORD (BitString16)
16#85/01/1F = 133/01/31 History parameters R WORD (BitString16)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
16#85/01/5B = 133/01/91 History parameters R WORD (BitString16)
16#85/01/3D = 133/01/61 History parameters R UINT (Unsigned16)
16#85/01/83 = 133/01/131 History parameters R INT (Signed16)
16#85/01/8D = 133/01/141 History parameters R UINT (Unsigned16)
16#85/01/97 = 133/01/151 History parameters R UINT (Unsigned16)
16#85/01/A1 = 133/01/161 History parameters R UINT (Unsigned16)
16#85/01/02 = 133/01/02 LFT History parameters R WORD (Enumeration)
16#85/01/48 = 133/01/72 History parameters R UINT (Unsigned16)
16#85/01/2A = 133/01/42 History parameters R INT (Signed16)
16#85/01/34 = 133/01/52 History parameters R INT (Signed16)
16#85/01/52 = 133/01/82 History parameters R UINT (Unsigned16)
16#85/01/0C = 133/01/12 History parameters R WORD (BitString16)
16#85/01/16 = 133/01/22 History parameters R WORD (BitString16)
16#85/01/20 = 133/01/32 History parameters R WORD (BitString16)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
16#85/01/5C = 133/01/92 History parameters R WORD (BitString16)
16#85/01/3E = 133/01/62 History parameters R UINT (Unsigned16)
16#85/01/84 = 133/01/132 History parameters R INT (Signed16)
16#85/01/8E = 133/01/142 History parameters R UINT (Unsigned16)
16#85/01/98 = 133/01/152 History parameters R UINT (Unsigned16)
16#85/01/A2 = 133/01/162 History parameters R UINT (Unsigned16)
16#85/01/03 = 133/01/03 LFT History parameters R WORD (Enumeration)
16#85/01/49 = 133/01/73 History parameters R UINT (Unsigned16)
16#85/01/2B = 133/01/43 History parameters R INT (Signed16)
16#85/01/35 = 133/01/53 History parameters R INT (Signed16)
16#85/01/53 = 133/01/83 History parameters R UINT (Unsigned16)
16#85/01/0D = 133/01/13 History parameters R WORD (BitString16)
16#85/01/17 = 133/01/23 History parameters R WORD (BitString16)
16#85/01/21 = 133/01/33 History parameters R WORD (BitString16)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
16#85/01/5D = 133/01/93 History parameters R WORD (BitString16)
16#85/01/3F = 133/01/63 History parameters R UINT (Unsigned16)
16#85/01/85 = 133/01/133 History parameters R INT (Signed16)
16#85/01/8F = 133/01/143 History parameters R UINT (Unsigned16)

# Internal
16#85/01/99 = 133/01/153 History parameters R UINT (Unsigned16)
16#85/01/A3 = 133/01/163 History parameters R UINT (Unsigned16)
16#85/01/04 = 133/01/04 LFT History parameters R WORD (Enumeration)
16#85/01/4A = 133/01/74 History parameters R UINT (Unsigned16)
16#85/01/2C = 133/01/44 History parameters R INT (Signed16)
16#85/01/36 = 133/01/54 History parameters R INT (Signed16)
16#85/01/54 = 133/01/84 History parameters R UINT (Unsigned16)
16#85/01/0E = 133/01/14 History parameters R WORD (BitString16)
16#85/01/18 = 133/01/24 History parameters R WORD (BitString16)
16#85/01/22 = 133/01/34 History parameters R WORD (BitString16)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
16#85/01/5E = 133/01/94 History parameters R WORD (BitString16)
16#85/01/40 = 133/01/64 History parameters R UINT (Unsigned16)
16#85/01/86 = 133/01/134 History parameters R INT (Signed16)
16#85/01/90 = 133/01/144 History parameters R UINT (Unsigned16)
16#85/01/9A = 133/01/154 History parameters R UINT (Unsigned16)
16#85/01/A4 = 133/01/164 History parameters R UINT (Unsigned16)
16#85/01/05 = 133/01/05 LFT History parameters R WORD (Enumeration)
16#85/01/4B = 133/01/75 History parameters R UINT (Unsigned16)
16#85/01/2D = 133/01/45 History parameters R INT (Signed16)
16#85/01/37 = 133/01/55 History parameters R INT (Signed16)
16#85/01/55 = 133/01/85 History parameters R UINT (Unsigned16)
16#85/01/0F = 133/01/15 History parameters R WORD (BitString16)
16#85/01/19 = 133/01/25 History parameters R WORD (BitString16)
16#85/01/23 = 133/01/35 History parameters R WORD (BitString16)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
16#85/01/5F = 133/01/95 History parameters R WORD (BitString16)
16#85/01/41 = 133/01/65 History parameters R UINT (Unsigned16)
16#85/01/87 = 133/01/135 History parameters R INT (Signed16)
16#85/01/91 = 133/01/145 History parameters R UINT (Unsigned16)
16#85/01/9B = 133/01/155 History parameters R UINT (Unsigned16)
16#85/01/A5 = 133/01/165 History parameters R UINT (Unsigned16)
16#85/01/06 = 133/01/06 LFT History parameters R WORD (Enumeration)
16#85/01/4C = 133/01/76 History parameters R UINT (Unsigned16)
16#85/01/2E = 133/01/46 History parameters R INT (Signed16)
16#85/01/38 = 133/01/56 History parameters R INT (Signed16)
16#85/01/56 = 133/01/86 History parameters R UINT (Unsigned16)
16#85/01/10 = 133/01/16 History parameters R WORD (BitString16)
16#85/01/1A = 133/01/26 History parameters R WORD (BitString16)
16#85/01/24 = 133/01/36 History parameters R WORD (BitString16)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
16#85/01/60 = 133/01/96 History parameters R WORD (BitString16)
16#85/01/42 = 133/01/66 History parameters R UINT (Unsigned16)
16#85/01/88 = 133/01/136 History parameters R INT (Signed16)
16#85/01/92 = 133/01/146 History parameters R UINT (Unsigned16)
16#85/01/9C = 133/01/156 History parameters R UINT (Unsigned16)
16#85/01/A6 = 133/01/166 History parameters R UINT (Unsigned16)
16#85/01/07 = 133/01/07 LFT History parameters R WORD (Enumeration)
16#85/01/4D = 133/01/77 History parameters R UINT (Unsigned16)
16#85/01/2F = 133/01/47 History parameters R INT (Signed16)
16#85/01/39 = 133/01/57 History parameters R INT (Signed16)
16#85/01/57 = 133/01/87 History parameters R UINT (Unsigned16)
16#85/01/11 = 133/01/17 History parameters R WORD (BitString16)
16#85/01/1B = 133/01/27 History parameters R WORD (BitString16)
16#85/01/25 = 133/01/37 History parameters R WORD (BitString16)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
16#85/01/61 = 133/01/97 History parameters R WORD (BitString16)

# Internal
 16#85/01/43 = 133/01/67 History parameters R UINT (Unsigned16)
16#85/01/89 = 133/01/137 History parameters R INT (Signed16)
16#85/01/93 = 133/01/147 History parameters R UINT (Unsigned16)
16#85/01/9D = 133/01/157 History parameters R UINT (Unsigned16)
16#85/01/A7 = 133/01/167 History parameters R UINT (Unsigned16)
16#85/01/08 = 133/01/08 LFT History parameters R WORD (Enumeration)
16#85/01/4E = 133/01/78 History parameters R UINT (Unsigned16)
16#85/01/30 = 133/01/48 History parameters R INT (Signed16)
16#85/01/3A = 133/01/58 History parameters R INT (Signed16)
16#85/01/58 = 133/01/88 History parameters R UINT (Unsigned16)
16#85/01/12 = 133/01/18 History parameters R WORD (BitString16)
16#85/01/1C = 133/01/28 History parameters R WORD (BitString16)
16#85/01/26 = 133/01/38 History parameters R WORD (BitString16)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
16#85/01/62 = 133/01/98 History parameters R WORD (BitString16)
16#85/01/44 = 133/01/68 History parameters R UINT (Unsigned16)
16#85/01/8A = 133/01/138 History parameters R INT (Signed16)
16#85/01/94 = 133/01/148 History parameters R UINT (Unsigned16)
16#85/01/9E = 133/01/158 History parameters R UINT (Unsigned16)
16#85/01/A8 = 133/01/168 History parameters R UINT (Unsigned16)
16#85/01/09 = 133/01/09 LFT History parameters R WORD (Enumeration)
16#85/01/4F = 133/01/79 History parameters R UINT (Unsigned16)
16#85/01/31 = 133/01/49 History parameters R INT (Signed16)
16#85/01/3B = 133/01/59 History parameters R INT (Signed16)
16#85/01/59 = 133/01/89 History parameters R UINT (Unsigned16)
16#85/01/13 = 133/01/19 History parameters R WORD (BitString16)
16#85/01/1D = 133/01/29 History parameters R WORD (BitString16)
16#85/01/27 = 133/01/39 History parameters R WORD (BitString16)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
16#85/01/63 = 133/01/99 History parameters R WORD (BitString16)
16#85/01/45 = 133/01/69 History parameters R UINT (Unsigned16)
16#85/01/8B = 133/01/139 History parameters R INT (Signed16)
16#85/01/95 = 133/01/149 History parameters R UINT (Unsigned16)
16#85/01/9F = 133/01/159 History parameters R UINT (Unsigned16)
16#85/01/A9 = 133/01/169 History parameters R UINT (Unsigned16)
16#70/01/0C = 112/01/12 NCV Identification parameters R WORD (Enumeration)
16#70/01/0D = 112/01/13 VCAL Identification parameters R WORD (Enumeration)
16#70/01/12 = 112/01/18 Identification parameters R UINT (Unsigned16)
16#71/01/67 = 113/01/103 Identification parameters R UINT (Unsigned16)
16#71/01/8D = 113/01/141 Identification parameters R/W UINT (Unsigned16)
16#71/01/8E = 113/01/142 Identification parameters R/W UINT (Unsigned16)
16#71/01/8F = 113/01/143 Identification parameters R/W UINT (Unsigned16)
16#71/01/90 = 113/01/144 Identification parameters R/W UINT (Unsigned16)
16#71/01/91 = 113/01/145 Identification parameters R/W UINT (Unsigned16)
16#71/01/92 = 113/01/146 Identification parameters R/W UINT (Unsigned16)
16#71/01/93 = 113/01/147 Identification parameters R/W UINT (Unsigned16)
16#71/01/94 = 113/01/148 Identification parameters R/W UINT (Unsigned16)
16#A0/01/A2 = 160/01/162 Communication parameters R UINT (Unsigned16)
16#A0/01/A3 = 160/01/163 Communication parameters R UINT (Unsigned16)
16#A0/01/A4 = 160/01/164 Communication parameters R UINT (Unsigned16)
16#A0/01/A5 = 160/01/165 Communication parameters R UINT (Unsigned16)
16#A0/01/A6 = 160/01/166 Communication parameters R UINT (Unsigned16)
16#A0/01/A7 = 160/01/167 Communication parameters R UINT (Unsigned16)
16#A0/01/A8 = 160/01/168 Communication parameters R UINT (Unsigned16)
16#A0/01/A9 = 160/01/169 Communication parameters R UINT (Unsigned16)
16#A0/01/8E = 160/01/142 Communication parameters R UINT (Unsigned16)
16#A0/01/8F = 160/01/143 Communication parameters R UINT (Unsigned16)
16#A0/01/90 = 160/01/144 Communication parameters R UINT (Unsigned16)
16#A0/01/91 = 160/01/145 Communication parameters R UINT (Unsigned16)

# Internal
16#A0/01/92 = 160/01/146 Communication parameters R UINT (Unsigned16)
16#A0/01/93 = 160/01/147 Communication parameters R UINT (Unsigned16)
16#A0/01/94 = 160/01/148 Communication parameters R UINT (Unsigned16)
16#A0/01/95 = 160/01/149 Communication parameters R UINT (Unsigned16)
16#8C/01/0A = 140/01/10 CiA 402 settings R/W UINT (Unsigned32)
16#8C/01/08 = 140/01/08 CiA 402 settings R/W UINT (Unsigned32)
16#8C/01/0C = 140/01/12 CiA 402 settings R/W UINT (Unsigned32)
16#8C/01/0E = 140/01/14 CiA 402 settings R/W UINT (Unsigned16)
16#8C/01/0F = 140/01/15 CiA 402 settings R/W UINT (Unsigned32)
16#8C/01/2B = 140/01/43 CiA 402 settings R/WS INT (Signed16)
16#8C/01/2C = 140/01/44 CiA 402 settings R/WS INT (Signed16)
16#8C/01/35 = 140/01/53 DOTD CiA 402 settings R/WS WORD (Enumeration)
16#8C/01/34 = 140/01/52 QSTD CiA 402 settings R/WS WORD (Enumeration)
16#89/01/02 = 137/01/02 SCS Configuration management R/WS WORD (Enumeration)
16#89/01/03 = 137/01/03 FCS Configuration management R/WS WORD (Enumeration)
16#70/01/17 = 112/01/23 Configuration management R/WS WORD (BitString16)
16#A1/01/67 = 161/01/103 PSLIN Parameter set switching R/WS WORD (Enumeration)
16#A1/01/68 = 161/01/104 PSLIN Parameter set switching R/WS WORD (Enumeration)
16#A1/01/65 = 161/01/101 CFPS Parameter set switching R WORD (Enumeration)
16#A1/01/66 = 161/01/102 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/70 = 161/01/112 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/71 = 161/01/113 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/72 = 161/01/114 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/73 = 161/01/115 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/74 = 161/01/116 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/75 = 161/01/117 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/76 = 161/01/118 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/77 = 161/01/119 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/78 = 161/01/120 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/79 = 161/01/121 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/7A = 161/01/122 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/7B = 161/01/123 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/7C = 161/01/124 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/7D = 161/01/125 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/7E = 161/01/126 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/84 = 161/01/132 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/85 = 161/01/133 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/86 = 161/01/134 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/87 = 161/01/135 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/88 = 161/01/136 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/89 = 161/01/137 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/8A = 161/01/138 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/8B = 161/01/139 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/8C = 161/01/140 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/8D = 161/01/141 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/8E = 161/01/142 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/8F = 161/01/143 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/90 = 161/01/144 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/91 = 161/01/145 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/92 = 161/01/146 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/98 = 161/01/152 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/99 = 161/01/153 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/9A = 161/01/154 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/9B = 161/01/155 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/9C = 161/01/156 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/9D = 161/01/157 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/9E = 161/01/158 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/9F = 161/01/159 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/A0 = 161/01/160 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/A1 = 161/01/161 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/A2 = 161/01/162 Parameter set switching R/W UINT (Unsigned16)

# Internal
16#A1/01/A3 = 161/01/163 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/A4 = 161/01/164 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/A5 = 161/01/165 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/A6 = 161/01/166 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/AC = 161/01/172 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/AD = 161/01/173 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/AE = 161/01/174 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/AF = 161/01/175 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/B0 = 161/01/176 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/B1 = 161/01/177 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/B2 = 161/01/178 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/B3 = 161/01/179 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/B4 = 161/01/180 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/B5 = 161/01/181 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/B6 = 161/01/182 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/B7 = 161/01/183 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/B8 = 161/01/184 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/B9 = 161/01/185 Parameter set switching R/W UINT (Unsigned16)
16#A1/01/BA = 161/01/186 Parameter set switching R/W UINT (Unsigned16)
16#70/01/6A = 112/01/106 Configuration and settings R/W UINT (Unsigned16)

16#70/01/69 = 112/01/105 Configuration and settings R/W UINT (Unsigned16)

16#91/01/17 = 145/01/23 Configuration and settings R/W UINT (Unsigned16)

16#91/01/1E = 145/01/30 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/68 = 142/01/104 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/69 = 142/01/105 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/6A = 142/01/106 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/71 = 142/01/113 Configuration and settings R/WS UINT (Unsigned16)

16#8E/01/6B = 142/01/107 SSL Configuration and settings R/WS WORD (Enumeration)
16#8E/01/6C = 142/01/108 Configuration and settings R UINT (Unsigned16)
16#8E/01/6D = 142/01/109 Configuration and settings R/WS UINT (Unsigned16)
16#8E/01/6E = 142/01/110 Configuration and settings R UINT (Unsigned16)
16#8E/01/6F = 142/01/111 Configuration and settings R/W UINT (Unsigned16)
16#8E/01/70 = 142/01/112 Configuration and settings R/W UINT (Unsigned16)
16#8E/01/74 = 142/01/116 Configuration and settings R/WS UINT (Unsigned16)
16#8E/01/75 = 142/01/117 Configuration and settings R/WS UINT (Unsigned16)
16#98/01/02 = 152/01/02 Configuration and settings R/W UINT (Unsigned16)

16#98/01/11 = 152/01/17 Configuration and settings R/W INT (Signed16)

16#98/01/10 = 152/01/16 Configuration and settings R/W INT (Signed16)

16#98/01/04 = 152/01/04 Configuration and settings R/W UINT (Unsigned16)

16#98/01/05 = 152/01/05 Configuration and settings R/W UINT (Unsigned16)

16#99/01/67 = 153/01/103 Configuration and settings R/W UINT (Unsigned16)

# Internal
16#99/01/66 = 153/01/102 Configuration and settings R/W UINT (Unsigned16)

16#99/01/70 = 153/01/112 Configuration and settings R/W UINT (Unsigned16)

16#99/01/68 = 153/01/104 Configuration and settings R/W UINT (Unsigned16)

16#70/01/10 = 112/01/16 BFR Configuration and settings R/WS WORD (Enumeration)

16#91/01/0E = 145/01/14 Configuration and settings R/WS UINT (Unsigned16)

16#91/01/07 = 145/01/07 Configuration and settings R/WS UINT (Unsigned16)

16#91/01/02 = 145/01/02 Configuration and settings R/WS UINT (Unsigned16)

16#91/01/04 = 145/01/04 Configuration and settings R/WS UINT (Unsigned16)

16#91/01/03 = 145/01/03 Configuration and settings R/WS UINT (Unsigned16)

16#91/01/05 = 145/01/05 Configuration and settings R/WS UINT (Unsigned16)

16#70/01/68 = 112/01/104 Configuration and settings R/WS UINT (Unsigned16)

16#91/01/09 = 145/01/09 ACTION Configuration and settings R/W WORD (Enumeration)

16#91/01/10 = 145/01/16 AUT Configuration and settings R/W WORD (Enumeration)

16#91/01/0A = 145/01/10 ACT Configuration and settings R WORD (Enumeration)

16#91/01/08 = 145/01/08 CTT Configuration and settings R/WS WORD (Enumeration)

16#9F/01/04 = 159/01/04 Configuration and settings R/WS UINT (Unsigned16)
16#9F/01/05 = 159/01/05 Configuration and settings R/WS UINT (Unsigned16)
16#9F/01/06 = 159/01/06 Configuration and settings R/WS UINT (Unsigned16)
16#9F/01/07 = 159/01/07 Configuration and settings R/WS UINT (Unsigned16)
16#9F/01/08 = 159/01/08 Configuration and settings R/WS UINT (Unsigned16)
16#9F/01/09 = 159/01/09 Configuration and settings R/WS UINT (Unsigned16)
16#9F/01/0A = 159/01/10 Configuration and settings R/WS UINT (Unsigned16)
16#9F/01/0B = 159/01/11 Configuration and settings R/WS UINT (Unsigned16)
16#9F/01/0C = 159/01/12 Configuration and settings R/WS UINT (Unsigned16)
16#9F/01/0D = 159/01/13 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/47 = 145/01/71 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/48 = 145/01/72 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/49 = 145/01/73 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/55 = 145/01/85 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/4A = 145/01/74 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/4B = 145/01/75 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/4C = 145/01/76 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/53 = 145/01/83 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/18 = 145/01/24 Configuration and settings R/W UINT (Unsigned16)

16#91/01/1A = 145/01/26 Configuration and settings R/W UINT (Unsigned16)

16#91/01/13 = 145/01/19 Configuration and settings R UINT (Unsigned16)

16#91/01/15 = 145/01/21 Configuration and settings R/W UINT (Unsigned16)
16#91/01/16 = 145/01/22 Configuration and settings R/W UINT (Unsigned16)
16#91/01/2B = 145/01/43 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/35 = 145/01/53 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/3F = 145/01/63 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/44 = 145/01/68 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/50 = 145/01/80 Configuration and settings R UINT (Unsigned16)

# Internal
16#70/01/67 = 112/01/103 Configuration and settings R/W UINT (Unsigned16)

16#8F/01/02 = 143/01/02 Configuration and settings R/W UINT (Unsigned16)

16#70/01/66 = 112/01/102 SFT Configuration and settings R/WS WORD (Enumeration)

16#70/01/6C = 112/01/108 N_Y Configuration and settings R/WS WORD (Enumeration)
16#A6/01/6F = 166/01/111 BOA Configuration and settings R/WS WORD (Enumeration)
16#A0/01/02 = 160/01/02 N_Y Configuration and settings R/WS WORD (Enumeration)
16#A0/01/03 = 160/01/03 SOP Configuration and settings R/WS WORD (Enumeration)

16#70/01/83 = 112/01/131 FFM Configuration and settings R/W WORD (Enumeration)

16#98/01/66 = 152/01/102 TCC Configuration and settings R/WS WORD (Enumeration)

16#98/01/67 = 152/01/103 TCT Configuration and settings R/WS WORD (Enumeration)

16#98/01/6A = 152/01/106 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#70/01/6B = 112/01/107 BSP Configuration and settings R/W WORD (Enumeration)

16#77/01/03 = 119/01/03 AIOT Configuration and settings R/WS WORD (Enumeration)

# Internal
16#77/01/0D = 119/01/13 Configuration and settings R/WS UINT (Unsigned16)

16#77/01/17 = 119/01/23 Configuration and settings R/WS UINT (Unsigned16)

16#77/01/35 = 119/01/53 Configuration and settings R/W UINT (Unsigned16)

16#77/01/3F = 119/01/63 Configuration and settings R/W UINT (Unsigned16)

16#77/01/49 = 119/01/73 Configuration and settings R/W UINT (Unsigned16)

# Internal
16#77/01/04 = 119/01/04 AIOT Configuration and settings R/WS WORD (Enumeration)

16#77/01/0E = 119/01/14 Configuration and settings R/WS UINT (Unsigned16)

# Internal
16#77/01/18 = 119/01/24 Configuration and settings R/WS UINT (Unsigned16)

16#77/01/36 = 119/01/54 Configuration and settings R/W UINT (Unsigned16)

16#77/01/40 = 119/01/64 Configuration and settings R/W UINT (Unsigned16)

16#77/01/4A = 119/01/74 Configuration and settings R/W UINT (Unsigned16)
16#77/01/05 = 119/01/05 AIOT Configuration and settings R/WS WORD (Enumeration)

# Internal
16#77/01/23 = 119/01/35 Configuration and settings R/WS UINT (Unsigned16)

16#77/01/2D = 119/01/45 Configuration and settings R/WS UINT (Unsigned16)

16#77/01/37 = 119/01/55 Configuration and settings R/W UINT (Unsigned16)

16#77/01/41 = 119/01/65 Configuration and settings R/W UINT (Unsigned16)

16#77/01/4B = 119/01/75 Configuration and settings R/W UINT (Unsigned16)
16#7A/01/16 = 122/01/22 PSA Configuration and settings R/WS WORD (Enumeration)

16#78/01/02 = 120/01/02 AIOT Configuration and settings R/WS WORD (Enumeration)

16#78/01/2A = 120/01/42 Configuration and settings R/WS UINT (Unsigned16)

16#78/01/34 = 120/01/52 Configuration and settings R/WS UINT (Unsigned16)

16#78/01/16 = 120/01/22 Configuration and settings R/WS UINT (Unsigned16)

16#78/01/20 = 120/01/32 Configuration and settings R/WS UINT (Unsigned16)

# Internal
16#78/01/3E = 120/01/62 Configuration and settings R/WS UINT (Unsigned16)

16#78/01/48 = 120/01/72 Configuration and settings R/WS UINT (Unsigned16)

16#78/01/0C = 120/01/12 Configuration and settings R/WS UINT (Unsigned16)

16#8B/01/0E = 139/01/14 PSA Configuration and settings R/WS WORD (Enumeration)

16#70/01/6D = 112/01/109 RIN Configuration and settings R/WS WORD (Enumeration)

PST Configuration and settings R/WS WORD (Enumeration)

16#8B/01/02 = 139/01/02 CHCF Configuration and settings R/WS WORD (Enumeration)
16#8B/01/16 = 139/01/22 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#8B/01/18 = 139/01/24 CDX Configuration and settings R/WS WORD (Enumeration)
16#8B/01/19 = 139/01/25 CDX Configuration and settings R/WS WORD (Enumeration)
16#8B/01/0C = 139/01/12 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#8B/01/0F = 139/01/15 PSA Configuration and settings R/WS WORD (Enumeration)
16#8B/01/03 = 139/01/03 COP Configuration and settings R/WS WORD (Enumeration)
16#A4/01/66 = 164/01/102 CSLFN Configuration and settings R/WS WORD (Enumeration)
16#A4/01/67 = 164/01/103 CSLFN Configuration and settings R/WS WORD (Enumeration)
16#A4/01/68 = 164/01/104 CSLFN Configuration and settings R/WS WORD (Enumeration)
16#A4/01/69 = 164/01/105 CSLFN Configuration and settings R/WS WORD (Enumeration)
16#A4/01/82 = 164/01/130 BMP Configuration and settings R/WS WORD (Enumeration)
16#8B/01/0D = 139/01/13 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#8B/01/10 = 139/01/16 PSA Configuration and settings R/WS WORD (Enumeration)
16#9C/01/02 = 156/01/02 PSA Configuration and settings R/WS WORD (Enumeration)
16#9C/01/03 = 156/01/03 PSA Configuration and settings R/WS WORD (Enumeration)
16#9C/01/0C = 156/01/12 PSA Configuration and settings R/WS WORD (Enumeration)
16#9C/01/0D = 156/01/13 PSA Configuration and settings R/WS WORD (Enumeration)
16#9C/01/16 = 156/01/22 PSA Configuration and settings R/WS WORD (Enumeration)
16#9C/01/17 = 156/01/23 PSA Configuration and settings R/WS WORD (Enumeration)
16#8E/01/05 = 142/01/05 RPT Configuration and settings R/W WORD (Enumeration)
16#8E/01/15 = 142/01/21 INR Configuration and settings R/W WORD (Enumeration)

16#8E/01/02 = 142/01/02 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/03 = 142/01/03 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/06 = 142/01/06 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/07 = 142/01/07 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/08 = 142/01/08 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/09 = 142/01/09 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/0C = 142/01/12 Configuration and settings R/WS UINT (Unsigned16)

16#8E/01/0B = 142/01/11 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#8E/01/0D = 142/01/13 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/0E = 142/01/14 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/04 = 142/01/04 BRA Configuration and settings R/WS WORD (Enumeration)

16#99/01/02 = 153/01/02 STT Configuration and settings R/WS WORD (Enumeration)
16#99/01/15 = 153/01/21 Configuration and settings R/W UINT (Unsigned16)

# Internal
16#99/01/03 = 153/01/03 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#99/01/05 = 153/01/05 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#99/01/1F = 153/01/31 Configuration and settings R/W UINT (Unsigned16)

16#99/01/04 = 153/01/04 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#99/01/0B = 153/01/11 Configuration and settings R/W UINT (Unsigned16)

16#99/01/0E = 153/01/14 Configuration and settings R/W UINT (Unsigned16)

16#99/01/0D = 153/01/13 Configuration and settings R/W UINT (Unsigned16)

16#99/01/0C = 153/01/12 Configuration and settings R/W UINT (Unsigned16)

16#95/01/02 = 149/01/02 ADC Configuration and settings R/W WORD (Enumeration)

16#95/01/04 = 149/01/04 Configuration and settings R/W UINT (Unsigned16)

16#95/01/03 = 149/01/03 Configuration and settings R/W UINT (Unsigned16)

16#95/01/06 = 149/01/06 Configuration and settings R/W UINT (Unsigned16)

16#95/01/05 = 149/01/05 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/02 = 154/01/02 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#9A/01/03 = 154/01/03 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#9A/01/04 = 154/01/04 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#9A/01/05 = 154/01/05 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#9A/01/0B = 154/01/11 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/0C = 154/01/12 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/0D = 154/01/13 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/0E = 154/01/14 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/0F = 154/01/15 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/10 = 154/01/16 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/11 = 154/01/17 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/12 = 154/01/18 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/13 = 154/01/19 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/14 = 154/01/20 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/15 = 154/01/21 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/16 = 154/01/22 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/17 = 154/01/23 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/18 = 154/01/24 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/19 = 154/01/25 Configuration and settings R/W UINT (Unsigned16)

16#9A/01/66 = 154/01/102 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#9A/01/67 = 154/01/103 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#9A/01/68 = 154/01/104 STR Configuration and settings R/WS WORD (Enumeration)
16#A6/01/7E = 166/01/126 AST Configuration and settings R/WS WORD (Enumeration)

16#AF/01/08 = 175/01/08 Configuration and settings R/WS UINT (Unsigned16)

# Internal
16#9C/01/66 = 156/01/102 PSA Configuration and settings R/WS WORD (Enumeration)

16#9C/01/69 = 156/01/105 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/6A = 156/01/106 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/6B = 156/01/107 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/6C = 156/01/108 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/6D = 156/01/109 N_Y Configuration and settings R/WS WORD (Enumeration)

16#9C/01/79 = 156/01/121 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/8E = 156/01/142 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/8F = 156/01/143 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/90 = 156/01/144 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/B9 = 156/01/185 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/8D = 156/01/141 N_Y Configuration and settings R/WS WORD (Enumeration)

16#9C/01/99 = 156/01/153 Configuration and settings R/W INT (Signed16)

16#9C/01/9A = 156/01/154 Configuration and settings R/W INT (Signed16)

16#9C/01/A2 = 156/01/162 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/A3 = 156/01/163 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/A4 = 156/01/164 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/91 = 156/01/145 PSLIN Configuration and settings R/WS WORD (Enumeration)

# Internal
16#9C/01/97 = 156/01/151 PSA Configuration and settings R/WS WORD (Enumeration)

16#9C/01/98 = 156/01/152 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/AB = 156/01/171 PSL Configuration and settings R/WS WORD (Enumeration)

16#9C/01/9B = 156/01/155 PSA Configuration and settings R/WS WORD (Enumeration)

16#9B/01/66 = 155/01/102 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/6E = 156/01/110 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#9C/01/6F = 156/01/111 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#9C/01/7A = 156/01/122 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/7B = 156/01/123 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/7C = 156/01/124 Configuration and settings R/W UINT (Unsigned16)

16#8F/01/0B = 143/01/11 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#A5/01/03 = 165/01/03 CSLOUT Configuration and settings R/WS WORD (Enumeration)
16#A5/01/02 = 165/01/02 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#A5/01/04 = 165/01/04 Configuration and settings R/WS UINT (Unsigned16)

16#91/01/0B = 145/01/11 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#84/01/7D = 132/01/125 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#84/01/81 = 132/01/129 N_Y Configuration and settings R/WS WORD (Enumeration)
16#84/01/82 = 132/01/130 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#84/01/7B = 132/01/123 N_Y Configuration and settings R/WS WORD (Enumeration)

16#84/01/7C = 132/01/124 DUR Configuration and settings R/WS WORD (Enumeration)

16#70/01/6F = 112/01/111 FLR Configuration and settings R/WS WORD (Enumeration)

16#91/01/0D = 145/01/13 THT Configuration and settings R/WS WORD (Enumeration)

16#98/01/03 = 152/01/03 Configuration and settings R/W UINT (Unsigned16)

16#84/01/0A = 132/01/10 ECFG Configuration and settings R/WS WORD (Enumeration)

16#91/01/0C = 145/01/12 OPL Configuration and settings R/WS WORD (Enumeration)
16#84/01/52 = 132/01/82 Configuration and settings R/W UINT (Unsigned16)
16#84/01/03 = 132/01/03 ECFG Configuration and settings R/WS WORD (Enumeration)
16#84/01/09 = 132/01/09 ECFG Configuration and settings R/WS WORD (Enumeration)
16#98/01/0A = 152/01/10 Configuration and settings R/W UINT (Unsigned16)
16#84/01/84 = 132/01/132 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#84/01/07 = 132/01/07 ECFG Configuration and settings R/WS WORD (Enumeration)
16#A6/01/04 = 166/01/04 USB Configuration and settings R/WS WORD (Enumeration)
16#A6/01/02 = 166/01/02 URES Configuration and settings R/WS WORD (Enumeration)

# Internal
 16#A6/01/03 = 166/01/03 Configuration and settings R/WS UINT (Unsigned16)
16#A6/01/05 = 166/01/05 Configuration and settings R/WS UINT (Unsigned16)
16#84/01/05 = 132/01/05 STP Configuration and settings R/WS WORD (Enumeration)
16#A6/01/0E = 166/01/14 Configuration and settings R/W UINT (Unsigned16)
16#A6/01/0C = 166/01/12 Configuration and settings R/WS UINT (Unsigned16)
16#A6/01/0F = 166/01/15 Configuration and settings R/W UINT (Unsigned16)
16#A6/01/0D = 166/01/13 Configuration and settings R/W UINT (Unsigned16)
16#70/01/71 = 112/01/113 N_Y Configuration and settings R/WS WORD (Enumeration)
16#70/01/72 = 112/01/114 COFM Configuration and settings R/WS WORD (Enumeration)
16#84/01/0E = 132/01/14 ECFG Configuration and settings R/WS WORD (Enumeration)
16#84/01/7E = 132/01/126 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#84/01/7F = 132/01/127 INHS Configuration and settings R/WS WORD (Enumeration)

16#84/01/80 = 132/01/128 Configuration and settings R/WS UINT (Unsigned16)
16#84/01/10 = 132/01/16 ECFG Configuration and settings R/WS WORD (Enumeration)
16#84/01/0C = 132/01/12 ECFG Configuration and settings R/WS WORD (Enumeration)
16#84/01/0B = 132/01/11 ECFG Configuration and settings R/WS WORD (Enumeration)
16#84/01/0D = 132/01/13 ECFG Configuration and settings R/WS WORD (Enumeration)
16#A7/01/02 = 167/01/02 Configuration and settings R/WS UINT (Unsigned16)
16#84/01/51 = 132/01/81 Configuration and settings R/WS UINT (Unsigned16)

16#A0/01/7A = 160/01/122 Configuration and settings R/WS UINT (Unsigned16)

16#A0/01/7B = 160/01/123 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/7C = 160/01/124 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/7D = 160/01/125 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/7E = 160/01/126 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/7F = 160/01/127 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/80 = 160/01/128 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/81 = 160/01/129 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/66 = 160/01/102 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/67 = 160/01/103 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/68 = 160/01/104 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/69 = 160/01/105 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/6A = 160/01/106 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/6B = 160/01/107 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/6C = 160/01/108 Configuration and settings R/WS UINT (Unsigned16)
16#A0/01/6D = 160/01/109 Configuration and settings R/WS UINT (Unsigned16)
16#AE/01/02 = 174/01/02 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/03 = 174/01/03 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/04 = 174/01/04 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/05 = 174/01/05 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/06 = 174/01/06 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/07 = 174/01/07 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/16 = 174/01/22 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/17 = 174/01/23 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/18 = 174/01/24 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/19 = 174/01/25 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/1A = 174/01/26 Configuration and settings R/W UINT (Unsigned16)
16#AE/01/1B = 174/01/27 Configuration and settings R/W UINT (Unsigned16)

# Internal
16#7F/01/02 = 127/01/02 Configuration and settings R/WS UINT (Unsigned16)
16#82/01/34 = 130/01/52 Configuration and settings R/WS UINT (Unsigned16)
16#7F/01/04 = 127/01/04 TBR Configuration and settings R/WS WORD (Enumeration)
16#7F/01/05 = 127/01/05 FOR Configuration and settings R/WS WORD (Enumeration)
16#7F/01/06 = 127/01/06 Configuration and settings R/WS UINT (Unsigned16)
16#7F/01/34 = 127/01/52 Configuration and settings R/WS UINT (Unsigned16)
16#7F/01/36 = 127/01/54 BDCO Configuration and settings R/WS WORD (Enumeration)
16#7F/01/39 = 127/01/57 Configuration and settings R UINT (Unsigned16)

16#8B/01/20 = 139/01/32 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#8B/01/21 = 139/01/33 PSA Configuration and settings R/WS WORD (Enumeration)
16#8B/01/22 = 139/01/34 Configuration and settings R/WS UINT (Unsigned16)
16#82/01/02 = 130/01/02 Configuration and settings R/WS UINT (Unsigned16)

16#82/01/42 = 130/01/66 PRFL Configuration and settings R/W WORD (Enumeration)

16#82/01/43 = 130/01/67 DPMA Communication parameters R/W WORD (Enumeration)

16#82/01/44 = 130/01/68 CIOA Configuration and settings R/W WORD (Enumeration)

16#82/01/04 = 130/01/04 TBR Configuration and settings R/WS WORD (Enumeration)

16#82/01/3D = 130/01/61 TBR Configuration and settings R/W WORD (Enumeration)

RDS Configuration and settings R/W WORD (Enumeration)

Configuration and settings R/W WORD (BitString16)
RDS Configuration and settings R WORD (Enumeration)
16#75/01/02 = 117/01/02 Configuration and settings R/WS UINT (Unsigned16)
16#7A/01/02 = 122/01/02 PSL Configuration and settings R/WS WORD (Enumeration)
16#7A/01/03 = 122/01/03 PSL Configuration and settings R/WS WORD (Enumeration)
16#75/01/03 = 117/01/03 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/2A = 118/01/42 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/2B = 118/01/43 Configuration and settings R/WS UINT (Unsigned16)
16#75/01/04 = 117/01/04 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/02 = 118/01/02 NPL Configuration and settings R/WS WORD (Enumeration)
16#76/01/03 = 118/01/03 NPL Configuration and settings R/WS WORD (Enumeration)
16#75/01/05 = 117/01/05 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/16 = 118/01/22 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/17 = 118/01/23 Configuration and settings R/WS UINT (Unsigned16)
16#75/01/06 = 117/01/06 Configuration and settings R/WS UINT (Unsigned16)
16#75/01/07 = 117/01/07 Configuration and settings R/WS UINT (Unsigned16)
16#71/01/17 = 113/01/23 Configuration and settings R INT (Signed16)
16#71/01/19 = 113/01/25 Configuration and settings R UINT (Unsigned16)
16#71/01/1A = 113/01/26 Configuration and settings R INT (Signed16)
16#71/01/1B = 113/01/27 Configuration and settings R INT (Signed16)
16#71/01/1E = 113/01/30 Configuration and settings R UINT (Unsigned16)
16#71/01/5B = 113/01/91 Configuration and settings R INT (Signed16)
16#7B/01/5C = 123/01/92 Measurement parameters R INT (Signed16)
16#7B/01/5D = 123/01/93 Measurement parameters R INT (Signed16)
16#7B/01/5E = 123/01/94 Measurement parameters R INT (Signed16)
16#7B/01/60 = 123/01/96 Actual values parameters R INT (Signed16)
16#A9/01/0C = 169/01/12 Configuration and settings R/WS UINT (Unsigned16)
16#A9/01/02 = 169/01/02 Configuration and settings R/W UINT (Unsigned16)

16#A9/01/0D = 169/01/13 ECFG Configuration and settings R/WS WORD (Enumeration)

16#A9/01/0F = 169/01/15 Configuration and settings R/W UINT (Unsigned16)

16#A9/01/10 = 169/01/16 Configuration and settings R/W UINT (Unsigned16)

# Internal
16#A9/01/11 = 169/01/17 Configuration and settings R/W UINT (Unsigned16)

16#A9/01/16 = 169/01/22 Configuration and settings R/WS UINT (Unsigned16)

16#A9/01/17 = 169/01/23 ECFG Configuration and settings R/WS WORD (Enumeration)
16#AD/01/7B = 173/01/123 STOS Safety function R WORD (Enumeration)
16#9C/01/BA = 156/01/186 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/29 = 142/01/41 Configuration and settings R/W UINT (Unsigned16)

16#7B/01/17 = 123/01/23 Measurement parameters R INT (Signed16)

16#77/01/67 = 119/01/103 Configuration and settings R/WS INT (Signed16)

16#77/01/71 = 119/01/113 Configuration and settings R/WS INT (Signed16)

16#7B/01/18 = 123/01/24 Measurement parameters R INT (Signed16)

# Internal
16#77/01/68 = 119/01/104 Configuration and settings R/WS INT (Signed16)

16#77/01/72 = 119/01/114 Configuration and settings R/WS INT (Signed16)

16#7B/01/19 = 123/01/25 Measurement parameters R INT (Signed16)

16#77/01/69 = 119/01/105 Configuration and settings R/WS INT (Signed16)

# Internal
16#77/01/73 = 119/01/115 Configuration and settings R/WS INT (Signed16)

16#7B/01/2E = 123/01/46 I/O parameters R INT (Signed16)

16#77/01/42 = 119/01/66 Configuration and settings R/W UINT (Unsigned16)
16#77/01/38 = 119/01/56 Configuration and settings R/W UINT (Unsigned16)

16#7B/01/1A = 123/01/26 Measurement parameters R INT (Signed16)

16#77/01/6A = 119/01/106 Configuration and settings R/WS INT (Signed16)

16#77/01/74 = 119/01/116 Configuration and settings R/WS INT (Signed16)

16#7B/01/24 = 123/01/36 I/O parameters R INT (Signed16)

16#77/01/4C = 119/01/76 Configuration and settings R/W UINT (Unsigned16)

# Internal
16#77/01/06 = 119/01/06 AIOT Configuration and settings R/WS WORD (Enumeration)

16#7B/01/2F = 123/01/47 I/O parameters R INT (Signed16)

16#77/01/43 = 119/01/67 Configuration and settings R/W UINT (Unsigned16)
16#77/01/39 = 119/01/57 Configuration and settings R/W UINT (Unsigned16)

16#7B/01/1B = 123/01/27 Measurement parameters R INT (Signed16)

16#77/01/6B = 119/01/107 Configuration and settings R/WS INT (Signed16)

# Internal
16#77/01/75 = 119/01/117 Configuration and settings R/WS INT (Signed16)

16#7B/01/25 = 123/01/37 I/O parameters R INT (Signed16)

16#77/01/4D = 119/01/77 Configuration and settings R/W UINT (Unsigned16)
16#77/01/07 = 119/01/07 AIOT Configuration and settings R/WS WORD (Enumeration)

# Internal
16#7B/01/53 = 123/01/83 PSA Configuration and settings R/WS WORD (Enumeration)

16#7B/01/34 = 123/01/52 I/O parameters R INT (Signed16)

16#7A/01/17 = 122/01/23 PSA Configuration and settings R/WS WORD (Enumeration)

16#7B/01/49 = 123/01/73 I/O parameters R/W INT (Signed16)

16#78/01/0D = 120/01/13 Configuration and settings R/WS UINT (Unsigned16)

16#7B/01/35 = 123/01/53 I/O parameters R INT (Signed16)

16#7B/01/3F = 123/01/63 I/O parameters R/W INT (Signed16)
16#78/01/03 = 120/01/03 AIOT Configuration and settings R/WS WORD (Enumeration)
16#78/01/35 = 120/01/53 Configuration and settings R/WS UINT (Unsigned16)

16#78/01/2B = 120/01/43 Configuration and settings R/WS UINT (Unsigned16)

16#B0/01/B5 = 176/01/181 APPS Status parameters R WORD (Enumeration)

16#78/01/49 = 120/01/73 Configuration and settings R/WS UINT (Unsigned16)

16#78/01/3F = 120/01/63 Configuration and settings R/WS UINT (Unsigned16)

16#9B/01/B6 = 155/01/182 Configuration and settings R/W INT (Signed16)

16#9B/01/B7 = 155/01/183 Configuration and settings R/W UINT (Unsigned16)

16#9B/01/B5 = 155/01/181 N_Y Configuration and settings R/WS WORD (Enumeration)

16#9B/01/B8 = 155/01/184 Configuration and settings R/W INT (Signed16)

16#B2/01/51 = 178/01/81 CAR Configuration and settings R/W WORD (Enumeration)

16#97/01/07 = 151/01/07 Actual values parameters R UINT (Unsigned32)
16#B2/01/3D = 178/01/61 Actual values parameters R UINT (Unsigned32)
16#B2/01/3F = 178/01/63 Actual values parameters R UINT (Unsigned32)
16#B2/01/41 = 178/01/65 Actual values parameters R UINT (Unsigned32)
16#B2/01/43 = 178/01/67 Actual values parameters R UINT (Unsigned32)
16#B2/01/45 = 178/01/69 Actual values parameters R UINT (Unsigned32)
16#B2/01/01 = 178/01/01 CCA Configuration and settings R/WS WORD (Enumeration)
16#B2/01/02 = 178/01/02 CCA Configuration and settings R/WS WORD (Enumeration)
16#B2/01/03 = 178/01/03 CCA Configuration and settings R/WS WORD (Enumeration)
16#B2/01/04 = 178/01/04 CCA Configuration and settings R/WS WORD (Enumeration)
16#B2/01/05 = 178/01/05 CCA Configuration and settings R/WS WORD (Enumeration)
16#B2/01/29 = 178/01/41 Configuration and settings R/WS UINT (Unsigned32)
16#B2/01/2B = 178/01/43 Configuration and settings R/WS UINT (Unsigned32)
16#B2/01/2D = 178/01/45 Configuration and settings R/WS UINT (Unsigned32)
16#B2/01/2F = 178/01/47 Configuration and settings R/WS UINT (Unsigned32)
16#B2/01/31 = 178/01/49 Configuration and settings R/WS UINT (Unsigned32)

# Internal
16#B2/01/0B = 178/01/11 CCS Configuration and settings R/WS WORD (Enumeration)
16#B2/01/0C = 178/01/12 CCS Configuration and settings R/WS WORD (Enumeration)
16#B2/01/0D = 178/01/13 CCS Configuration and settings R/WS WORD (Enumeration)
16#B2/01/0E = 178/01/14 CCS Configuration and settings R/WS WORD (Enumeration)
16#B2/01/0F = 178/01/15 CCS Configuration and settings R/WS WORD (Enumeration)
16#B2/01/15 = 178/01/21 Configuration and settings R/W UINT (Unsigned32)
16#B2/01/17 = 178/01/23 Configuration and settings R/W UINT (Unsigned32)
16#B2/01/19 = 178/01/25 Configuration and settings R/W UINT (Unsigned32)
16#B2/01/1B = 178/01/27 Configuration and settings R/W UINT (Unsigned32)
16#B2/01/1D = 178/01/29 Configuration and settings R/W UINT (Unsigned32)
16#A9/01/71 = 169/01/113 Configuration and settings R/W INT (Signed16)

16#85/01/28 = 133/01/40 History parameters R WORD (BitString16)

16#87/01/1F = 135/01/31 History parameters R WORD (BitString16)
16#87/01/20 = 135/01/32 History parameters R WORD (BitString16)
16#87/01/21 = 135/01/33 History parameters R WORD (BitString16)
16#87/01/22 = 135/01/34 History parameters R WORD (BitString16)
16#87/01/23 = 135/01/35 History parameters R WORD (BitString16)
16#87/01/24 = 135/01/36 History parameters R WORD (BitString16)
16#97/01/09 = 151/01/09 Actual values parameters R UINT (Unsigned32)
16#77/01/2B = 119/01/43 Configuration and settings R/WS UINT (Unsigned16)

# Internal
16#77/01/2C = 119/01/44 Configuration and settings R/WS UINT (Unsigned16)

16#77/01/2E = 119/01/46 Configuration and settings R/WS UINT (Unsigned16)

# Internal
16#77/01/2F = 119/01/47 Configuration and settings R/WS UINT (Unsigned16)

16#77/01/21 = 119/01/33 Configuration and settings R/WS UINT (Unsigned16)

# Internal
16#77/01/22 = 119/01/34 Configuration and settings R/WS UINT (Unsigned16)

16#77/01/24 = 119/01/36 Configuration and settings R/WS UINT (Unsigned16)

# Internal
16#77/01/25 = 119/01/37 Configuration and settings R/WS UINT (Unsigned16)

16#85/01/64 = 133/01/100 History parameters R WORD (BitString16)

16#87/01/5B = 135/01/91 History parameters R WORD (BitString16)
16#87/01/5C = 135/01/92 History parameters R WORD (BitString16)
16#87/01/5D = 135/01/93 History parameters R WORD (BitString16)
16#87/01/5E = 135/01/94 History parameters R WORD (BitString16)
16#87/01/5F = 135/01/95 History parameters R WORD (BitString16)
16#87/01/60 = 135/01/96 History parameters R WORD (BitString16)
16#98/01/0B = 152/01/11 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/2B = 142/01/43 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/2C = 142/01/44 Configuration and settings R/W UINT (Unsigned16)

16#76/01/54 = 118/01/84 Configuration and settings R/WS UINT (Unsigned16)

16#76/01/4A = 118/01/74 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/40 = 118/01/64 NPL Configuration and settings R/WS WORD (Enumeration)
16#76/01/55 = 118/01/85 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/4B = 118/01/75 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/41 = 118/01/65 NPL Configuration and settings R/WS WORD (Enumeration)
16#8E/01/2D = 142/01/45 Configuration and settings R/W UINT (Unsigned16)

16#8E/01/2A = 142/01/42 Configuration and settings R/W UINT (Unsigned16)

16#A9/01/73 = 169/01/115 Configuration and settings R/W UINT (Unsigned16)

16#85/01/6F = 133/01/111 History parameters R UINT (Unsigned16)

16#85/01/70 = 133/01/112 History parameters R UINT (Unsigned16)
16#85/01/71 = 133/01/113 History parameters R UINT (Unsigned16)
16#85/01/72 = 133/01/114 History parameters R UINT (Unsigned16)
16#85/01/73 = 133/01/115 History parameters R UINT (Unsigned16)
16#85/01/74 = 133/01/116 History parameters R UINT (Unsigned16)
16#85/01/75 = 133/01/117 History parameters R UINT (Unsigned16)
16#85/01/76 = 133/01/118 History parameters R UINT (Unsigned16)
16#85/01/77 = 133/01/119 History parameters R UINT (Unsigned16)
16#85/01/78 = 133/01/120 History parameters R UINT (Unsigned16)
16#87/01/6F = 135/01/111 History parameters R UINT (Unsigned16)
16#87/01/70 = 135/01/112 History parameters R UINT (Unsigned16)
16#87/01/71 = 135/01/113 History parameters R UINT (Unsigned16)

# Internal
16#87/01/72 = 135/01/114 History parameters R UINT (Unsigned16)
16#87/01/73 = 135/01/115 History parameters R UINT (Unsigned16)
16#87/01/74 = 135/01/116 History parameters R UINT (Unsigned16)
16#7A/01/22 = 122/01/34 PSL Configuration and settings R/WS WORD (Enumeration)
16#7A/01/23 = 122/01/35 PSL Configuration and settings R/WS WORD (Enumeration)
16#85/01/0A = 133/01/10 LFT History parameters R WORD (Enumeration)
16#87/01/01 = 135/01/01 LFT History parameters R WORD (Enumeration)
16#87/01/02 = 135/01/02 LFT History parameters R WORD (Enumeration)
16#87/01/03 = 135/01/03 LFT History parameters R WORD (Enumeration)
16#87/01/04 = 135/01/04 LFT History parameters R WORD (Enumeration)
16#87/01/05 = 135/01/05 LFT History parameters R WORD (Enumeration)
16#87/01/06 = 135/01/06 LFT History parameters R WORD (Enumeration)
16#70/01/0B = 112/01/11 DRT Configuration and settings R/WS WORD (Enumeration)
16#B0/01/99 = 176/01/153 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/97 = 176/01/151 DRYM Configuration and settings R/WS WORD (Enumeration)

16#B0/01/9A = 176/01/154 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/98 = 176/01/152 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B0/01/9B = 176/01/155 Configuration and settings R/W UINT (Unsigned16)

16#B1/01/36 = 177/01/54 Actual values parameters R INT (Signed16)

16#97/01/03 = 151/01/03 Configuration and settings R/WS UINT (Unsigned16)
16#97/01/02 = 151/01/02 Configuration and settings R/WS UINT (Unsigned16)
16#B1/01/33 = 177/01/51 Actual values parameters R UINT (Unsigned16)
16#B1/01/35 = 177/01/53 Actual values parameters R UINT (Unsigned16)
16#B1/01/34 = 177/01/52 Actual values parameters R UINT (Unsigned16)
16#85/01/14 = 133/01/20 History parameters R WORD (BitString16)
16#87/01/0B = 135/01/11 History parameters R WORD (BitString16)
16#87/01/0C = 135/01/12 History parameters R WORD (BitString16)
16#87/01/0D = 135/01/13 History parameters R WORD (BitString16)
16#87/01/0E = 135/01/14 History parameters R WORD (BitString16)
16#87/01/0F = 135/01/15 History parameters R WORD (BitString16)
16#87/01/10 = 135/01/16 History parameters R WORD (BitString16)
16#B1/01/37 = 177/01/55 Actual values parameters R INT (Signed16)
16#71/01/5E = 113/01/94 Actual values parameters R INT (Signed16)

Fault parameters R/W UINT (Unsigned16)

16#97/01/05 = 151/01/05 Actual values parameters R/WS UINT (Unsigned32)
16#8C/01/04 = 140/01/04 Status parameters R WORD (BitString16)
16#84/01/89 = 132/01/137 Fault parameters R/W UINT (Unsigned16)
16#84/01/16 = 132/01/22 ECFG Configuration and settings R/WS WORD (Enumeration)

16#98/01/0D = 152/01/13 Configuration and settings R/W UINT (Unsigned16)

16#71/01/41 = 113/01/65 Actual values parameters R/WS UINT (Unsigned32)

16#B1/01/01 = 177/01/01 FEM Configuration and settings R/WS WORD (Enumeration)
16#B0/01/29 = 176/01/41 FLCM Configuration and settings R/WS WORD (Enumeration)
16#B0/01/2A = 176/01/42 Configuration and settings R/W INT (Signed16)

16#B0/01/2D = 176/01/45 Configuration and settings R/W INT (Signed16)

16#B0/01/2B = 176/01/43 Configuration and settings R/W INT (Signed16)

16#A9/01/74 = 169/01/116 N_Y Configuration and settings R/WS WORD (Enumeration)

16#B0/01/2E = 176/01/46 Configuration and settings R INT (Signed16)
16#B0/01/2C = 176/01/44 Configuration and settings R/W INT (Signed16)

# Internal
16#AF/01/68 = 175/01/104 PSA Configuration and settings R/WS WORD (Enumeration)

16#AF/01/76 = 175/01/118 Actual values parameters R/WS INT (Signed32)

16#B1/01/39 = 177/01/57 Configuration and settings R INT (Signed16)
16#B1/01/38 = 177/01/56 Configuration and settings R INT (Signed16)
16#AF/01/74 = 175/01/116 Actual values parameters R INT (Signed16)

16#71/01/40 = 113/01/64 Measurement parameters R UINT (Unsigned16)

16#98/01/0C = 152/01/12 Configuration and settings R/W UINT (Unsigned16)

16#A9/01/18 = 169/01/24 Configuration and settings R/W UINT (Unsigned16)

16#A9/01/0E = 169/01/14 Configuration and settings R/W UINT (Unsigned16)

16#84/01/1F = 132/01/31 Configuration and settings R/WS INT (Signed16)

16#B1/01/04 = 177/01/04 Configuration and settings R/W INT (Signed16)

16#B1/01/05 = 177/01/05 Configuration and settings R/W INT (Signed16)

16#B0/01/40 = 176/01/64 ECFG Configuration and settings R/WS WORD (Enumeration)

16#B0/01/3F = 176/01/63 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/3E = 176/01/62 Configuration and settings R/W INT (Signed16)

16#B0/01/3D = 176/01/61 N_Y Configuration and settings R/WS WORD (Enumeration)

16#85/01/82 = 133/01/130 HMIS History parameters R WORD (Enumeration)
16#87/01/79 = 135/01/121 HMIS History parameters R WORD (Enumeration)
16#87/01/7A = 135/01/122 HMIS History parameters R WORD (Enumeration)
16#87/01/7B = 135/01/123 HMIS History parameters R WORD (Enumeration)
16#87/01/7C = 135/01/124 HMIS History parameters R WORD (Enumeration)
16#87/01/7D = 135/01/125 HMIS History parameters R WORD (Enumeration)
16#87/01/7E = 135/01/126 HMIS History parameters R WORD (Enumeration)
16#96/01/1B = 150/01/27 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/1C = 150/01/28 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/1D = 150/01/29 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/1E = 150/01/30 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/1F = 150/01/31 Actual values parameters R/WS UINT (Unsigned16)
16#A6/01/3D = 166/01/61 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#96/01/25 = 150/01/37 Actual values parameters R/WS INT (Signed16)
16#96/01/26 = 150/01/38 Actual values parameters R/WS INT (Signed16)
16#96/01/27 = 150/01/39 Actual values parameters R/WS INT (Signed16)
16#96/01/28 = 150/01/40 Actual values parameters R/WS INT (Signed16)
16#96/01/29 = 150/01/41 Actual values parameters R/WS INT (Signed16)
16#7B/01/02 = 123/01/02 I/O parameters R WORD (BitString16)

# Internal
16#92/01/02 = 146/01/02 CINR Configuration and settings R WORD (Enumeration)
16#92/01/05 = 146/01/05 CINR Configuration and settings R WORD (Enumeration)
16#92/01/03 = 146/01/03 CINR Configuration and settings R WORD (Enumeration)
16#92/01/04 = 146/01/04 CINR Configuration and settings R WORD (Enumeration)
16#92/01/06 = 146/01/06 CINR Configuration and settings R/WS WORD (Enumeration)
16#92/01/07 = 146/01/07 CINR Configuration and settings R WORD (Enumeration)
16#85/01/1E = 133/01/30 History parameters R WORD (BitString16)
16#87/01/15 = 135/01/21 History parameters R WORD (BitString16)
Communication parameters R UINT (Unsigned16)
16#87/01/16 = 135/01/22 History parameters R WORD (BitString16)
16#87/01/17 = 135/01/23 History parameters R WORD (BitString16)
16#87/01/18 = 135/01/24 History parameters R WORD (BitString16)
16#87/01/19 = 135/01/25 History parameters R WORD (BitString16)
16#87/01/1A = 135/01/26 History parameters R WORD (BitString16)
16#B0/01/73 = 176/01/115 ECFG Configuration and settings R/WS WORD (Enumeration)
16#B0/01/72 = 176/01/114 Configuration and settings R/W INT (Signed16)

16#B0/01/70 = 176/01/112 Configuration and settings R/W INT (Signed16)

16#B0/01/71 = 176/01/113 Configuration and settings R/W INT (Signed16)

16#B0/01/6F = 176/01/111 IPPM Configuration and settings R/WS WORD (Enumeration)

16#71/01/13 = 113/01/19 Actual values parameters R INT (Signed16)
16#71/01/5F = 113/01/95 Actual values parameters R INT (Signed16)
16#B0/01/80 = 176/01/128 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/81 = 176/01/129 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/8B = 176/01/139 ECFG Configuration and settings R/WS WORD (Enumeration)

16#B0/01/89 = 176/01/137 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/8A = 176/01/138 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/7A = 176/01/122 JATC Configuration and settings R/WS WORD (Enumeration)

16#B0/01/7E = 176/01/126 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/7F = 176/01/127 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/79 = 176/01/121 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B0/01/84 = 176/01/132 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/82 = 176/01/130 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/87 = 176/01/135 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/1F = 176/01/31 CSLOUT Configuration and settings R/WS WORD (Enumeration)

16#B0/01/21 = 176/01/33 Configuration and settings R/W INT (Signed16)

16#B0/01/20 = 176/01/32 Configuration and settings R/W INT (Signed16)

16#B0/01/23 = 176/01/35 Configuration and settings R/W INT (Signed16)

16#B0/01/22 = 176/01/34 Configuration and settings R/W INT (Signed16)

16#B0/01/24 = 176/01/36 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/85 = 176/01/133 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/83 = 176/01/131 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/7D = 176/01/125 Configuration and settings R/W UINT (Unsigned16)

# Internal
16#B0/01/7C = 176/01/124 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/7B = 176/01/123 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/86 = 176/01/134 Configuration and settings R/W UINT (Unsigned16)

16#75/01/0C = 117/01/12 Configuration and settings R/WS UINT (Unsigned16)

16#75/01/0D = 117/01/13 Configuration and settings R/WS UINT (Unsigned16)
16#75/01/0E = 117/01/14 Configuration and settings R/WS UINT (Unsigned16)
16#75/01/0F = 117/01/15 Configuration and settings R/WS UINT (Unsigned16)
16#75/01/10 = 117/01/16 Configuration and settings R/WS UINT (Unsigned16)
16#75/01/11 = 117/01/17 Configuration and settings R/WS UINT (Unsigned16)
16#A1/01/5B = 161/01/91 ALR Actual values parameters R WORD (Enumeration)
16#A5/01/79 = 165/01/121 N_Y Configuration and settings R/W WORD (Enumeration)
16#A5/01/7A = 165/01/122 Actual values parameters R UINT (Unsigned16)
16#85/01/32 = 133/01/50 History parameters R INT (Signed16)
16#87/01/29 = 135/01/41 History parameters R INT (Signed16)
16#87/01/2A = 135/01/42 History parameters R INT (Signed16)
16#87/01/2B = 135/01/43 History parameters R INT (Signed16)
16#87/01/2C = 135/01/44 History parameters R INT (Signed16)
16#87/01/2D = 135/01/45 History parameters R INT (Signed16)
16#87/01/2E = 135/01/46 History parameters R INT (Signed16)
16#B3/01/01 = 179/01/01 LDD Configuration and settings R/W WORD (Enumeration)
16#B3/01/03 = 179/01/03 LDD Configuration and settings R/W WORD (Enumeration)
16#B3/01/05 = 179/01/05 LDD Configuration and settings R/W WORD (Enumeration)
16#B3/01/07 = 179/01/07 LDD Configuration and settings R/W WORD (Enumeration)
16#B3/01/0A = 179/01/10 LDEN Configuration and settings R/W WORD (Enumeration)
16#B3/01/02 = 179/01/02 Configuration and settings R/W UINT (Unsigned16)
16#B3/01/04 = 179/01/04 Configuration and settings R/W UINT (Unsigned16)
16#B3/01/06 = 179/01/06 Configuration and settings R/W UINT (Unsigned16)
16#B3/01/08 = 179/01/08 Configuration and settings R/W UINT (Unsigned16)
16#B3/01/09 = 179/01/09 LDST Configuration and settings R/W WORD (Enumeration)
16#84/01/12 = 132/01/18 ECFG Configuration and settings R/WS WORD (Enumeration)
16#84/01/04 = 132/01/04 ECFG Configuration and settings R/WS WORD (Enumeration)
16#84/01/0F = 132/01/15 ECFG Configuration and settings R/WS WORD (Enumeration)
16#84/01/14 = 132/01/20 ECFG Configuration and settings R/WS WORD (Enumeration)
16#A9/01/1A = 169/01/26 Configuration and settings R/W UINT (Unsigned16)

16#85/01/65 = 133/01/101 History parameters R UINT (Unsigned16)

16#85/01/66 = 133/01/102 History parameters R UINT (Unsigned16)
16#85/01/67 = 133/01/103 History parameters R UINT (Unsigned16)
16#85/01/68 = 133/01/104 History parameters R UINT (Unsigned16)
16#85/01/69 = 133/01/105 History parameters R UINT (Unsigned16)
16#85/01/6A = 133/01/106 History parameters R UINT (Unsigned16)
16#85/01/6B = 133/01/107 History parameters R UINT (Unsigned16)
16#85/01/6C = 133/01/108 History parameters R UINT (Unsigned16)
16#85/01/6D = 133/01/109 History parameters R UINT (Unsigned16)
16#85/01/6E = 133/01/110 History parameters R UINT (Unsigned16)
16#87/01/65 = 135/01/101 History parameters R UINT (Unsigned16)
16#87/01/66 = 135/01/102 History parameters R UINT (Unsigned16)
16#87/01/67 = 135/01/103 History parameters R UINT (Unsigned16)
16#87/01/68 = 135/01/104 History parameters R UINT (Unsigned16)
16#87/01/69 = 135/01/105 History parameters R UINT (Unsigned16)
16#87/01/6A = 135/01/106 History parameters R UINT (Unsigned16)
16#96/01/02 = 150/01/02 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/03 = 150/01/03 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/04 = 150/01/04 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/05 = 150/01/05 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/06 = 150/01/06 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/2A = 150/01/42 Status parameters R UINT (Unsigned16)

# Internal
16#B0/01/A4 = 176/01/164 Configuration and settings R/W INT (Signed16)

16#B0/01/A3 = 176/01/163 Configuration and settings R/W INT (Signed16)

16#B0/01/A2 = 176/01/162 Configuration and settings R/W INT (Signed16)

16#B0/01/A1 = 176/01/161 Configuration and settings R/W INT (Signed16)

16#71/01/3D = 113/01/61 Configuration and settings R/WS UINT (Unsigned32)

16#96/01/07 = 150/01/07 Actual values parameters R/WS UINT (Unsigned16)

16#96/01/08 = 150/01/08 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/09 = 150/01/09 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/0A = 150/01/10 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/0B = 150/01/11 Actual values parameters R/WS UINT (Unsigned16)
16#AE/01/1C = 174/01/28 Communication parameters R/W UINT (Unsigned16)
16#AE/01/1D = 174/01/29 Communication parameters R/W UINT (Unsigned16)
16#AE/01/1E = 174/01/30 Communication parameters R/W UINT (Unsigned16)
16#AE/01/1F = 174/01/31 Communication parameters R/W UINT (Unsigned16)
16#AE/01/20 = 174/01/32 Communication parameters R/W UINT (Unsigned16)
16#AE/01/21 = 174/01/33 Communication parameters R/W UINT (Unsigned16)
16#AE/01/22 = 174/01/34 Communication parameters R/W UINT (Unsigned16)
16#AE/01/23 = 174/01/35 Communication parameters R/W UINT (Unsigned16)
16#AE/01/24 = 174/01/36 Communication parameters R/W UINT (Unsigned16)
16#AE/01/25 = 174/01/37 Communication parameters R/W UINT (Unsigned16)
16#96/01/17 = 150/01/23 Actual values parameters R UINT (Unsigned32)

16#96/01/19 = 150/01/25 Actual values parameters R UINT (Unsigned32)

16#96/01/11 = 150/01/17 Actual values parameters R/WS INT (Signed16)

16#96/01/12 = 150/01/18 Actual values parameters R/WS INT (Signed16)
16#96/01/13 = 150/01/19 Actual values parameters R/WS INT (Signed16)
16#96/01/14 = 150/01/20 Actual values parameters R/WS INT (Signed16)
16#96/01/15 = 150/01/21 Actual values parameters R/WS INT (Signed16)
16#70/01/6E = 112/01/110 OFI Configuration and settings R/WS WORD (Enumeration)
16#AE/01/08 = 174/01/08 Communication parameters R/W UINT (Unsigned16)
16#AE/01/09 = 174/01/09 Communication parameters R/W UINT (Unsigned16)
16#AE/01/0A = 174/01/10 Communication parameters R/W UINT (Unsigned16)
16#AE/01/0B = 174/01/11 Communication parameters R/W UINT (Unsigned16)
16#AE/01/0C = 174/01/12 Communication parameters R/W UINT (Unsigned16)
16#AE/01/0D = 174/01/13 Communication parameters R/W UINT (Unsigned16)
16#AE/01/0E = 174/01/14 Communication parameters R/W UINT (Unsigned16)
16#AE/01/0F = 174/01/15 Communication parameters R/W UINT (Unsigned16)
16#AE/01/10 = 174/01/16 Communication parameters R/W UINT (Unsigned16)
16#AE/01/11 = 174/01/17 Communication parameters R/W UINT (Unsigned16)
16#96/01/0C = 150/01/12 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/0D = 150/01/13 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/0E = 150/01/14 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/0F = 150/01/15 Actual values parameters R/WS UINT (Unsigned16)
16#96/01/10 = 150/01/16 Actual values parameters R/WS UINT (Unsigned16)
16#B0/01/38 = 176/01/56 ECFG Configuration and settings R/WS WORD (Enumeration)
16#B0/01/37 = 176/01/55 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/36 = 176/01/54 Configuration and settings R/W INT (Signed16)

16#B0/01/35 = 176/01/53 Configuration and settings R/W INT (Signed16)

16#B0/01/33 = 176/01/51 OPPM Configuration and settings R/WS WORD (Enumeration)

16#B0/01/34 = 176/01/52 PSLIN Configuration and settings R/WS WORD (Enumeration)

# Internal
16#71/01/5D = 113/01/93 Actual values parameters R INT (Signed16)

16#85/01/8C = 133/01/140 History parameters R INT (Signed16)

16#87/01/83 = 135/01/131 History parameters R INT (Signed16)
16#87/01/84 = 135/01/132 History parameters R INT (Signed16)
16#87/01/85 = 135/01/133 History parameters R INT (Signed16)
16#87/01/86 = 135/01/134 History parameters R INT (Signed16)
16#87/01/87 = 135/01/135 History parameters R INT (Signed16)
16#87/01/88 = 135/01/136 History parameters R INT (Signed16)
16#AF/01/AC = 175/01/172 N_Y Configuration and settings R/WS WORD (Enumeration)
16#97/01/33 = 151/01/51 Configuration and settings R/WS UINT (Unsigned16)
16#97/01/34 = 151/01/52 Configuration and settings R/WS UINT (Unsigned16)
16#97/01/35 = 151/01/53 Configuration and settings R/WS UINT (Unsigned16)
16#AF/01/A8 = 175/01/168 Configuration and settings R/WS INT (Signed16)
16#AF/01/AA = 175/01/170 Configuration and settings R/WS INT (Signed16)
16#AF/01/A9 = 175/01/169 Configuration and settings R/WS INT (Signed16)
16#AF/01/9E = 175/01/158 Configuration and settings R/WS INT (Signed16)
16#AF/01/9F = 175/01/159 Configuration and settings R/WS INT (Signed16)
16#AF/01/A0 = 175/01/160 Configuration and settings R/WS INT (Signed16)
16#AF/01/A1 = 175/01/161 Configuration and settings R/WS INT (Signed16)
16#AF/01/A2 = 175/01/162 Configuration and settings R/WS INT (Signed16)
16#AF/01/AB = 175/01/171 PCM Configuration and settings R/WS WORD (Enumeration)
16#AF/01/A3 = 175/01/163 Configuration and settings R/WS INT (Signed16)
16#AF/01/A4 = 175/01/164 Configuration and settings R/WS INT (Signed16)
16#AF/01/A5 = 175/01/165 Configuration and settings R/WS INT (Signed16)
16#AF/01/A6 = 175/01/166 Configuration and settings R/WS INT (Signed16)
16#AF/01/A7 = 175/01/167 Configuration and settings R/WS INT (Signed16)
16#B0/01/68 = 176/01/104 ECFG Configuration and settings R/WS WORD (Enumeration)
16#B0/01/65 = 176/01/101 PCPM Configuration and settings R/WS WORD (Enumeration)
16#B0/01/66 = 176/01/102 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/67 = 176/01/103 Configuration and settings R/W UINT (Unsigned16)

16#AF/01/99 = 175/01/153 Configuration and settings R/WS INT (Signed16)

16#AF/01/9A = 175/01/154 Configuration and settings R/WS INT (Signed16)
16#AF/01/9B = 175/01/155 Configuration and settings R/WS INT (Signed16)
16#AF/01/9C = 175/01/156 Configuration and settings R/WS INT (Signed16)
16#AF/01/9D = 175/01/157 Configuration and settings R/WS INT (Signed16)
16#AF/01/97 = 175/01/151 PCS Status parameters R WORD (Enumeration)
16#AF/01/98 = 175/01/152 Configuration and settings R/WS INT (Signed16)
16#B1/01/06 = 177/01/06 Configuration and settings R/W INT (Signed16)

16#B1/01/07 = 177/01/07 Configuration and settings R/W INT (Signed16)

16#7F/01/47 = 127/01/71 Communication parameters R/WS WORD (BitString16)

16#7F/01/48 = 127/01/72 Communication parameters R/WS WORD (BitString16)
16#7F/01/49 = 127/01/73 Communication parameters R/WS WORD (BitString16)
16#7F/01/4A = 127/01/74 Communication parameters R/WS WORD (BitString16)
16#A3/01/83 = 163/01/131 Actual values parameters R UINT (Unsigned32)
16#A3/01/97 = 163/01/151 Actual values parameters R UINT (Unsigned32)
16#B0/01/02 = 176/01/02 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B0/01/05 = 176/01/05 Configuration and settings R/W INT (Signed16)

16#B0/01/04 = 176/01/04 Configuration and settings R/W INT (Signed16)

16#B0/01/03 = 176/01/03 Configuration and settings R/W INT (Signed16)

# Internal
16#A3/01/7D = 163/01/125 Configuration and settings R/WS UINT (Unsigned16)

16#A3/01/91 = 163/01/145 Configuration and settings R/WS UINT (Unsigned16)

16#91/01/19 = 145/01/25 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/01 = 176/01/01 PFM Configuration and settings R/WS WORD (Enumeration)
16#9C/01/86 = 156/01/134 ECFG Configuration and settings R/WS WORD (Enumeration)

16#9C/01/85 = 156/01/133 Configuration and settings R/W UINT (Unsigned16)

16#9C/01/83 = 156/01/131 N_Y Configuration and settings R/WS WORD (Enumeration)

16#9C/01/84 = 156/01/132 Configuration and settings R/W UINT (Unsigned16)

16#A4/01/02 = 164/01/02 PHR Configuration and settings R/WS WORD (Enumeration)

16#A3/01/85 = 163/01/133 Configuration and settings R/WS INT (Signed16)

16#A3/01/87 = 163/01/135 Configuration and settings R/WS INT (Signed16)

16#A3/01/99 = 163/01/153 Configuration and settings R/WS INT (Signed16)

16#A3/01/9B = 163/01/155 Configuration and settings R/WS INT (Signed16)

# Internal
16#A3/01/7B = 163/01/123 Configuration and settings R/WS UINT (Unsigned16)

16#A3/01/8F = 163/01/143 Configuration and settings R/WS UINT (Unsigned16)

16#A3/01/79 = 163/01/121 Configuration and settings R/WS UINT (Unsigned32)

16#A3/01/8D = 163/01/141 Configuration and settings R/WS UINT (Unsigned32)

16#B0/01/AF = 176/01/175 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/B1 = 176/01/177 ECFG Configuration and settings R/WS WORD (Enumeration)

16#B0/01/B0 = 176/01/176 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/AD = 176/01/173 Configuration and settings R/W INT (Signed16)

16#B0/01/AB = 176/01/171 PLFM Configuration and settings R/WS WORD (Enumeration)

16#B0/01/B2 = 176/01/178 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/AC = 176/01/172 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B0/01/AE = 176/01/174 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/15 = 176/01/21 CSLOUT Configuration and settings R/WS WORD (Enumeration)

16#B0/01/16 = 176/01/22 Configuration and settings R/W UINT (Unsigned16)

16#AF/01/66 = 175/01/102 PSA Configuration and settings R/WS WORD (Enumeration)

# Internal
16#AF/01/72 = 175/01/114 Measurement parameters R INT (Signed16)

16#AF/01/67 = 175/01/103 PSA Configuration and settings R/WS WORD (Enumeration)

16#AF/01/73 = 175/01/115 Measurement parameters R INT (Signed16)

16#7A/01/04 = 122/01/04 PSL Configuration and settings R/WS WORD (Enumeration)

16#76/01/2C = 118/01/44 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/18 = 118/01/24 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/04 = 118/01/04 NPL Configuration and settings R/WS WORD (Enumeration)
16#7A/01/05 = 122/01/05 PSL Configuration and settings R/WS WORD (Enumeration)
16#76/01/2D = 118/01/45 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/19 = 118/01/25 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/05 = 118/01/05 NPL Configuration and settings R/WS WORD (Enumeration)
16#7A/01/06 = 122/01/06 PSL Configuration and settings R/WS WORD (Enumeration)
16#76/01/2E = 118/01/46 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/1A = 118/01/26 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/06 = 118/01/06 NPL Configuration and settings R/WS WORD (Enumeration)
16#7A/01/07 = 122/01/07 PSL Configuration and settings R/WS WORD (Enumeration)
16#76/01/2F = 118/01/47 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/1B = 118/01/27 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/07 = 118/01/07 NPL Configuration and settings R/WS WORD (Enumeration)
16#A9/01/72 = 169/01/114 Configuration and settings R/W INT (Signed16)

16#85/01/3C = 133/01/60 History parameters R INT (Signed16)

16#87/01/33 = 135/01/51 History parameters R INT (Signed16)
16#87/01/34 = 135/01/52 History parameters R INT (Signed16)
16#87/01/35 = 135/01/53 History parameters R INT (Signed16)
16#87/01/36 = 135/01/54 History parameters R INT (Signed16)
16#87/01/37 = 135/01/55 History parameters R INT (Signed16)
16#87/01/38 = 135/01/56 History parameters R INT (Signed16)
16#B1/01/03 = 177/01/03 Configuration and settings R/W UINT (Unsigned16)
16#98/01/0E = 152/01/14 Configuration and settings R/W UINT (Unsigned16)

16#98/01/0F = 152/01/15 Configuration and settings R/W UINT (Unsigned16)

16#85/01/46 = 133/01/70 History parameters R UINT (Unsigned16)

16#87/01/3D = 135/01/61 History parameters R UINT (Unsigned16)
16#87/01/3E = 135/01/62 History parameters R UINT (Unsigned16)
16#87/01/3F = 135/01/63 History parameters R UINT (Unsigned16)
16#87/01/40 = 135/01/64 History parameters R UINT (Unsigned16)
16#87/01/41 = 135/01/65 History parameters R UINT (Unsigned16)
16#87/01/42 = 135/01/66 History parameters R UINT (Unsigned16)
16#7B/01/5F = 123/01/95 Measurement parameters R INT (Signed16)
16#7B/01/63 = 123/01/99 Measurement parameters R INT (Signed16)
16#7B/01/61 = 123/01/97 Actual values parameters R INT (Signed16)
16#85/01/AA = 133/01/170 History parameters R UINT (Unsigned16)
16#87/01/A1 = 135/01/161 History parameters R UINT (Unsigned16)
16#87/01/A2 = 135/01/162 History parameters R UINT (Unsigned16)
16#87/01/A3 = 135/01/163 History parameters R UINT (Unsigned16)
16#87/01/A4 = 135/01/164 History parameters R UINT (Unsigned16)
16#87/01/A5 = 135/01/165 History parameters R UINT (Unsigned16)
16#87/01/A6 = 135/01/166 History parameters R UINT (Unsigned16)
16#9C/01/9C = 156/01/156 Configuration and settings R/W UINT (Unsigned16)

# Internal
16#9B/01/9D = 155/01/157 Configuration and settings R/W INT (Signed16)

16#9B/01/9E = 155/01/158 Configuration and settings R/W INT (Signed16)

16#9B/01/67 = 155/01/103 Configuration and settings R/W UINT (Unsigned16)

16#B1/01/08 = 177/01/08 Actual values parameters R INT (Signed16)

16#B1/01/0D = 177/01/13 Actual values parameters R INT (Signed16)

16#9B/01/99 = 155/01/153 Actual values parameters R/W INT (Signed16)

16#9B/01/9C = 155/01/156 Actual values parameters R/W INT (Signed16)

16#9B/01/97 = 155/01/151 SLPM Actual values parameters R/WS WORD (Enumeration)

16#9B/01/9B = 155/01/155 Actual values parameters R/W INT (Signed16)

16#9B/01/98 = 155/01/152 PSLIN Actual values parameters R/WS WORD (Enumeration)

16#9B/01/9A = 155/01/154 Actual values parameters R/W INT (Signed16)

16#9D/01/05 = 157/01/05 Actual values parameters R UINT (Unsigned16)

16#B1/01/65 = 177/01/101 Status parameters R WORD (BitString16)

16#B1/01/66 = 177/01/102 Status parameters R WORD (BitString16)
16#B1/01/67 = 177/01/103 Status parameters R WORD (BitString16)
16#B1/01/68 = 177/01/104 Status parameters R WORD (BitString16)
16#B1/01/69 = 177/01/105 Status parameters R WORD (BitString16)
16#B1/01/6A = 177/01/106 Status parameters R WORD (BitString16)
16#B1/01/6B = 177/01/107 Status parameters R WORD (BitString16)
16#B1/01/6C = 177/01/108 Status parameters R WORD (BitString16)
16#B1/01/6D = 177/01/109 Status parameters R WORD (BitString16)
16#B1/01/6E = 177/01/110 Status parameters R WORD (BitString16)
16#B1/01/70 = 177/01/112 Status parameters R WORD (BitString16)
16#B1/01/71 = 177/01/113 Status parameters R WORD (BitString16)
16#B1/01/72 = 177/01/114 Status parameters R WORD (BitString16)
16#B1/01/73 = 177/01/115 Status parameters R WORD (BitString16)
16#B1/01/74 = 177/01/116 Status parameters R WORD (BitString16)
16#B1/01/75 = 177/01/117 Status parameters R WORD (BitString16)
16#B1/01/76 = 177/01/118 Status parameters R WORD (BitString16)
16#B1/01/77 = 177/01/119 Status parameters R WORD (BitString16)
16#B1/01/78 = 177/01/120 Status parameters R WORD (BitString16)
16#AD/01/7C = 173/01/124 Status parameters R UINT (Unsigned16)
16#8F/01/48 = 143/01/72 Configuration and settings R/W UINT (Unsigned16)

16#8F/01/49 = 143/01/73 Configuration and settings R/W INT (Signed16)

16#8F/01/4A = 143/01/74 Configuration and settings R/W INT (Signed16)

16#8F/01/47 = 143/01/71 N_Y Configuration and settings R/WS WORD (Enumeration)

16#9D/01/1A = 157/01/26 SUCU Status parameters R/WS WORD (Enumeration)
16#9D/01/17 = 157/01/23 SUFR Status parameters R/WS WORD (Enumeration)
16#9D/01/16 = 157/01/22 SUPR Status parameters R/WS WORD (Enumeration)
16#9D/01/19 = 157/01/25 SUTP Status parameters R/WS WORD (Enumeration)
16#7F/01/18 = 127/01/24 TBR Configuration and settings R/WS WORD (Enumeration)
16#85/01/96 = 133/01/150 History parameters R UINT (Unsigned16)
16#87/01/8D = 135/01/141 History parameters R UINT (Unsigned16)
16#87/01/8E = 135/01/142 History parameters R UINT (Unsigned16)

# Internal
16#87/01/8F = 135/01/143 History parameters R UINT (Unsigned16)
16#87/01/90 = 135/01/144 History parameters R UINT (Unsigned16)
16#87/01/91 = 135/01/145 History parameters R UINT (Unsigned16)
16#87/01/92 = 135/01/146 History parameters R UINT (Unsigned16)
16#7F/01/19 = 127/01/25 FOR Configuration and settings R/WS WORD (Enumeration)
16#A3/01/15 = 163/01/21 Configuration and settings R/W INT (Signed16)

16#A3/01/29 = 163/01/41 ECFG Configuration and settings R/WS WORD (Enumeration)

16#A3/01/1F = 163/01/31 Configuration and settings R/W INT (Signed16)

16#A3/01/0B = 163/01/11 N_Y Configuration and settings R/WS WORD (Enumeration)

16#A3/01/33 = 163/01/51 Measurement parameters R INT (Signed16)

16#A3/01/16 = 163/01/22 Configuration and settings R/W INT (Signed16)

16#A3/01/2A = 163/01/42 ECFG Configuration and settings R/WS WORD (Enumeration)

16#A3/01/20 = 163/01/32 Configuration and settings R/W INT (Signed16)

16#A3/01/0C = 163/01/12 N_Y Configuration and settings R/WS WORD (Enumeration)

16#A3/01/34 = 163/01/52 Measurement parameters R INT (Signed16)

16#A3/01/17 = 163/01/23 Configuration and settings R/W INT (Signed16)

16#A3/01/2B = 163/01/43 ECFG Configuration and settings R/WS WORD (Enumeration)

16#A3/01/21 = 163/01/33 Configuration and settings R/W INT (Signed16)

16#A3/01/0D = 163/01/13 N_Y Configuration and settings R/WS WORD (Enumeration)

16#A3/01/35 = 163/01/53 Measurement parameters R INT (Signed16)

16#A3/01/18 = 163/01/24 Configuration and settings R/W INT (Signed16)

# Internal
16#A3/01/2C = 163/01/44 ECFG Configuration and settings R/WS WORD (Enumeration)

16#A3/01/22 = 163/01/34 Configuration and settings R/W INT (Signed16)

16#A3/01/0E = 163/01/14 N_Y Configuration and settings R/WS WORD (Enumeration)

16#A3/01/36 = 163/01/54 Measurement parameters R INT (Signed16)

16#85/01/5A = 133/01/90 History parameters R UINT (Unsigned16)

16#87/01/51 = 135/01/81 History parameters R UINT (Unsigned16)
16#87/01/52 = 135/01/82 History parameters R UINT (Unsigned16)
16#87/01/53 = 135/01/83 History parameters R UINT (Unsigned16)
16#87/01/54 = 135/01/84 History parameters R UINT (Unsigned16)
16#87/01/55 = 135/01/85 History parameters R UINT (Unsigned16)
16#87/01/56 = 135/01/86 History parameters R UINT (Unsigned16)
16#85/01/A0 = 133/01/160 History parameters R UINT (Unsigned16)
16#87/01/97 = 135/01/151 History parameters R UINT (Unsigned16)
16#87/01/98 = 135/01/152 History parameters R UINT (Unsigned16)
16#87/01/99 = 135/01/153 History parameters R UINT (Unsigned16)
16#87/01/9A = 135/01/154 History parameters R UINT (Unsigned16)
16#87/01/9B = 135/01/155 History parameters R UINT (Unsigned16)
16#87/01/9C = 135/01/156 History parameters R UINT (Unsigned16)
16#9C/01/78 = 156/01/120 TOCT Configuration and settings R/WS WORD (Enumeration)

Configuration and settings R/WS UINT (Unsigned16)

16#77/01/19 = 119/01/25 Configuration and settings R/WS UINT (Unsigned16)

# Internal
16#77/01/1A = 119/01/26 Configuration and settings R/WS UINT (Unsigned16)

16#77/01/1B = 119/01/27 Configuration and settings R/WS UINT (Unsigned16)

# Internal
16#77/01/0F = 119/01/15 Configuration and settings R/WS UINT (Unsigned16)

16#77/01/10 = 119/01/16 Configuration and settings R/WS UINT (Unsigned16)

# Internal
16#77/01/11 = 119/01/17 Configuration and settings R/WS UINT (Unsigned16)

16#85/01/50 = 133/01/80 History parameters R UINT (Unsigned16)

16#87/01/47 = 135/01/71 History parameters R UINT (Unsigned16)
16#87/01/48 = 135/01/72 History parameters R UINT (Unsigned16)
16#87/01/49 = 135/01/73 History parameters R UINT (Unsigned16)
16#87/01/4A = 135/01/74 History parameters R UINT (Unsigned16)
16#87/01/4B = 135/01/75 History parameters R UINT (Unsigned16)
16#87/01/4C = 135/01/76 History parameters R UINT (Unsigned16)
16#78/01/21 = 120/01/33 Configuration and settings R/WS UINT (Unsigned16)

16#78/01/17 = 120/01/23 Configuration and settings R/WS UINT (Unsigned16)

16#71/01/2C = 113/01/44 Measurement parameters R UINT (Unsigned16)

16#70/01/70 = 112/01/112 Configuration and settings R/WS UINT (Unsigned16)
16#9B/01/A1 = 155/01/161 Configuration and settings R/W INT (Signed16)

16#9B/01/A0 = 155/01/160 Configuration and settings R/W INT (Signed16)

16#9B/01/9F = 155/01/159 WUPM Configuration and settings R/WS WORD (Enumeration)

16#97/01/01 = 151/01/01 Configuration and settings R/WS UINT (Unsigned16)
16#71/01/62 = 113/01/98 Actual values parameters R INT (Signed16)
16#77/01/7B = 119/01/123 Configuration and settings R/WS INT (Signed16)

# Internal
16#77/01/85 = 119/01/133 Configuration and settings R/WS INT (Signed16)

16#9D/01/0C = 157/01/12 Actual values parameters R UINT (Unsigned16)

CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
CNL History parameters R WORD (Enumeration)
16#B0/01/07 = 176/01/07 N_Y Configuration and settings R/WS WORD (Enumeration)
16#9B/01/A3 = 155/01/163 Configuration and settings R/W INT (Signed16)

16#9B/01/A4 = 155/01/164 Configuration and settings R/W INT (Signed16)

16#7B/01/04 = 123/01/04 I/O parameters R WORD (BitString16)

16#7B/01/05 = 123/01/05 I/O parameters R WORD (BitString16)
16#7B/01/0E = 123/01/14 I/O parameters R WORD (BitString16)
16#7B/01/0F = 123/01/15 I/O parameters R/W WORD (BitString16)
16#89/01/3D = 137/01/61 PSS Configuration management R WORD (Enumeration)
16#A5/01/0C = 165/01/12 CBS Status parameters R WORD (Enumeration)
16#88/01/01 = 136/01/01 History parameters R WORD (BitString16)
16#88/01/02 = 136/01/02 History parameters R WORD (BitString16)
16#88/01/03 = 136/01/03 History parameters R WORD (BitString16)
16#88/01/04 = 136/01/04 History parameters R WORD (BitString16)
16#88/01/05 = 136/01/05 History parameters R WORD (BitString16)
16#88/01/06 = 136/01/06 History parameters R WORD (BitString16)
16#88/01/07 = 136/01/07 History parameters R WORD (BitString16)
16#88/01/08 = 136/01/08 History parameters R WORD (BitString16)
16#88/01/09 = 136/01/09 History parameters R WORD (BitString16)
16#88/01/0A = 136/01/10 History parameters R WORD (BitString16)
16#88/01/0B = 136/01/11 History parameters R WORD (BitString16)
16#88/01/0C = 136/01/12 History parameters R WORD (BitString16)
16#88/01/0D = 136/01/13 History parameters R WORD (BitString16)
16#88/01/0E = 136/01/14 History parameters R WORD (BitString16)
16#88/01/0F = 136/01/15 History parameters R WORD (BitString16)
16#88/01/10 = 136/01/16 History parameters R WORD (BitString16)
16#88/01/15 = 136/01/21 History parameters R WORD (BitString16)

# Internal
 16#88/01/16 = 136/01/22 History parameters R WORD (BitString16)
16#88/01/17 = 136/01/23 History parameters R WORD (BitString16)
16#88/01/18 = 136/01/24 History parameters R WORD (BitString16)
16#88/01/19 = 136/01/25 History parameters R WORD (BitString16)
16#88/01/1A = 136/01/26 History parameters R WORD (BitString16)
16#88/01/1B = 136/01/27 History parameters R WORD (BitString16)
16#88/01/1C = 136/01/28 History parameters R WORD (BitString16)
16#88/01/1D = 136/01/29 History parameters R WORD (BitString16)
16#88/01/1E = 136/01/30 History parameters R WORD (BitString16)
16#88/01/1F = 136/01/31 History parameters R WORD (BitString16)
16#88/01/20 = 136/01/32 History parameters R WORD (BitString16)
16#88/01/21 = 136/01/33 History parameters R WORD (BitString16)
16#88/01/22 = 136/01/34 History parameters R WORD (BitString16)
16#88/01/23 = 136/01/35 History parameters R WORD (BitString16)
16#88/01/24 = 136/01/36 History parameters R WORD (BitString16)
16#A5/01/B8 = 165/01/184 Measurement parameters R UINT (Unsigned16)
16#71/01/63 = 113/01/99 Actual values parameters R INT (Signed16)
16#A5/01/BB = 165/01/187 Actual values parameters R INT (Signed16)
16#A5/01/97 = 165/01/151 Measurement parameters R INT (Signed16)
16#A5/01/AB = 165/01/171 Measurement parameters R UINT (Unsigned16)
16#A5/01/AC = 165/01/172 Actual values parameters R UINT (Unsigned32)
16#A5/01/AE = 165/01/174 Actual values parameters R/WS UINT (Unsigned32)
Measurement parameters R UINT (Unsigned16)
16#A5/01/B0 = 165/01/176 Actual values parameters R UINT (Unsigned32)
16#A5/01/B2 = 165/01/178 Actual values parameters R UINT (Unsigned32)
16#A5/01/B4 = 165/01/180 Actual values parameters R UINT (Unsigned32)
16#A5/01/BA = 165/01/186 Configuration and settings R/W INT (Signed16)

16#91/01/1B = 145/01/27 TUNT Configuration and settings R/WS WORD (Enumeration)

16#9D/01/0D = 157/01/13 Actual values parameters R INT (Signed32)
EFDR Configuration management R WORD (Enumeration)
SFDR Configuration management R WORD (Enumeration)
FDRA Configuration management R/W WORD (Enumeration)
N_Y Configuration management R/WS WORD (Enumeration)
16#84/01/8A = 132/01/138 History parameters R UINT (Unsigned16)
16#85/01/7A = 133/01/122 HMIS History parameters R WORD (Enumeration)
16#85/01/7B = 133/01/123 HMIS History parameters R WORD (Enumeration)
16#85/01/7C = 133/01/124 HMIS History parameters R WORD (Enumeration)
16#85/01/7D = 133/01/125 HMIS History parameters R WORD (Enumeration)
16#85/01/7E = 133/01/126 HMIS History parameters R WORD (Enumeration)
16#85/01/7F = 133/01/127 HMIS History parameters R WORD (Enumeration)
16#85/01/80 = 133/01/128 HMIS History parameters R WORD (Enumeration)
16#85/01/81 = 133/01/129 HMIS History parameters R WORD (Enumeration)
16#71/01/45 = 113/01/69 Actual values parameters R INT (Signed16)
16#91/01/46 = 145/01/70 Actual values parameters R UINT (Unsigned16)

16#A5/01/94 = 165/01/148 Measurement parameters R INT (Signed16)

16#A5/01/95 = 165/01/149 Measurement parameters R INT (Signed16)
16#A5/01/96 = 165/01/150 Measurement parameters R INT (Signed16)
16#AF/01/64 = 175/01/100 APPT Configuration and settings R/WS WORD (Enumeration)
16#91/01/0F = 145/01/15 MPC Configuration and settings R/WS WORD (Enumeration)
16#8E/01/77 = 142/01/119 Configuration and settings R/WS UINT (Unsigned16)
16#91/01/4D = 145/01/77 Actual values parameters R INT (Signed16)
16#91/01/14 = 145/01/20 TUNU Configuration and settings R/WS WORD (Enumeration)
16#91/01/1C = 145/01/28 Configuration and settings R/WS UINT (Unsigned16)
16#A6/01/81 = 166/01/129 Configuration and settings R/WS INT (Signed16)
16#A6/01/83 = 166/01/131 N_Y Configuration and settings R/WS WORD (Enumeration)
16#A6/01/84 = 166/01/132 Configuration and settings R/WS INT (Signed16)
16#A6/01/71 = 166/01/113 Configuration and settings R/WS INT (Signed16)
16#A6/01/70 = 166/01/112 Configuration and settings R/WS UINT (Unsigned16)
16#8E/01/83 = 142/01/131 PSA Configuration and settings R/WS WORD (Enumeration)

# Internal
16#7F/01/56 = 127/01/86 Configuration and settings R/WS UINT (Unsigned16)

16#8F/01/11 = 143/01/17 Configuration and settings R/W UINT (Unsigned16)

16#8F/01/12 = 143/01/18 Configuration and settings R/W UINT (Unsigned16)

16#7F/01/07 = 127/01/07 TWO Configuration and settings R/WS WORD (Enumeration)

16#7F/01/1B = 127/01/27 TWO Configuration and settings R/WS WORD (Enumeration)
16#77/01/7C = 119/01/124 Configuration and settings R/WS INT (Signed16)

16#77/01/86 = 119/01/134 Configuration and settings R/WS INT (Signed16)

16#7B/01/54 = 123/01/84 Setpoint parameters R/W INT (Signed16)

# Internal
16#7B/01/55 = 123/01/85 PSA Configuration and settings R/WS WORD (Enumeration)

16#77/01/7D = 119/01/125 Configuration and settings R/WS INT (Signed16)

16#77/01/87 = 119/01/135 Configuration and settings R/WS INT (Signed16)

16#7B/01/56 = 123/01/86 Setpoint parameters R/W INT (Signed16)

# Internal
16#7B/01/57 = 123/01/87 PSA Configuration and settings R/WS WORD (Enumeration)

16#B1/01/16 = 177/01/22 Actual values parameters R INT (Signed16)

16#B1/01/18 = 177/01/24 Actual values parameters R INT (Signed16)

16#B1/01/19 = 177/01/25 Actual values parameters R INT (Signed16)
16#B1/01/1A = 177/01/26 Actual values parameters R INT (Signed16)
16#B1/01/1B = 177/01/27 Actual values parameters R INT (Signed16)
16#B3/01/66 = 179/01/102 Configuration and settings R/WS UINT (Unsigned16)

16#B3/01/67 = 179/01/103 Configuration and settings R/WS UINT (Unsigned16)

16#B3/01/69 = 179/01/105 MPST Configuration and settings R/WS WORD (Enumeration)

16#B3/01/BD = 179/01/189 ECFG Configuration and settings R/WS WORD (Enumeration)

16#B3/01/BE = 179/01/190 ECFG Configuration and settings R/WS WORD (Enumeration)

16#B3/01/C6 = 179/01/198 MPDT Configuration and settings R/WS WORD (Enumeration)

16#B3/01/C7 = 179/01/199 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/1E = 180/01/30 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/33 = 180/01/51 Configuration and settings R/WS UINT (Unsigned16)

16#B4/01/59 = 180/01/89 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/58 = 180/01/88 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/5C = 180/01/92 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/61 = 180/01/97 Configuration and settings R/W UINT (Unsigned16)

EFDR Configuration and settings R WORD (Enumeration)

SFDR Configuration and settings R WORD (Enumeration)
FDRA Configuration and settings R/W WORD (Enumeration)
N_Y Configuration and settings R/WS WORD (Enumeration)
16#84/01/BF = 132/01/191 Fault parameters R/WS WORD (BitString16)
16#B1/01/79 = 177/01/121 Status parameters R WORD (BitString16)
16#B1/01/10 = 177/01/16 Status parameters R INT (Signed16)

# Internal
16#B1/01/1C = 177/01/28 Status parameters R INT (Signed16)

16#B1/01/12 = 177/01/18 Configuration and settings R INT (Signed16)

16#B1/01/11 = 177/01/17 Configuration and settings R INT (Signed16)

16#B4/01/02 = 180/01/02 Configuration and settings R/W UINT (Unsigned16)

16#A6/01/4D = 166/01/77 OVMA Configuration and settings R/WS WORD (Enumeration)

16#B4/01/4A = 180/01/74 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/15 = 180/01/21 BSDM Configuration and settings R/WS WORD (Enumeration)

16#B4/01/18 = 180/01/24 Configuration and settings R/W INT (Signed16)

16#B3/01/6B = 179/01/107 MPLA Configuration and settings R/WS WORD (Enumeration)

16#B4/01/66 = 180/01/102 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B4/01/67 = 180/01/103 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B4/01/65 = 180/01/101 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B4/01/73 = 180/01/115 Configuration and settings R/WS INT (Signed16)

16#89/01/33 = 137/01/51 PSST Status parameters R WORD (Enumeration)

16#B4/01/0B = 180/01/11 BSDC Configuration and settings R/WS WORD (Enumeration)
16#B3/01/8E = 179/01/142 PXCT Status parameters R WORD (Enumeration)
16#7F/01/20 = 127/01/32 Status parameters R UINT (Unsigned16)
16#A6/01/57 = 166/01/87 Status parameters R INT (Signed16)
16#B4/01/A7 = 180/01/167 ECFG Configuration and settings R/WS WORD (Enumeration)
16#84/01/1C = 132/01/28 Configuration and settings R/WS INT (Signed16)
Configuration and settings R/W UINT (Unsigned16)
N_Y Configuration and settings R WORD (Enumeration)
16#A5/01/0B = 165/01/11 CBSR Configuration and settings R/WS WORD (Enumeration)
16#82/01/23 = 130/01/35 Configuration and settings R/W UINT (Unsigned32)
16#A5/01/BF = 165/01/191 CHR Configuration and settings R/W WORD (Enumeration)

16#75/01/2D = 117/01/45 Configuration and settings R/WS UINT (Unsigned16)

16#A2/01/66 = 162/01/102 Configuration and settings R/W UINT (Unsigned16)
16#B7/01/83 = 183/01/131 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B4/01/4B = 180/01/75 Configuration and settings R/W UINT (Unsigned16)

16#B1/01/21 = 177/01/33 Configuration and settings R INT (Signed16)

16#B4/01/48 = 180/01/72 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/49 = 180/01/73 Configuration and settings R/W UINT (Unsigned16)

16#B1/01/22 = 177/01/34 Configuration and settings R INT (Signed16)

16#B9/01/03 = 185/01/03 N_Y Configuration and settings R/WS WORD (Enumeration)

16#78/01/5C = 120/01/92 N_Y Configuration and settings R/WS WORD (Enumeration)
16#89/01/2B = 137/01/43 DLR Configuration and settings R/W WORD (Enumeration)
16#76/01/5E = 118/01/94 N_Y Configuration and settings R/WS WORD (Enumeration)
16#B3/01/7B = 179/01/123 CSLOUT Configuration and settings R/WS WORD (Enumeration)

# Internal
16#B3/01/7C = 179/01/124 CSLOUT Configuration and settings R/WS WORD (Enumeration)

16#B3/01/7A = 179/01/122 CSLOUT Configuration and settings R/WS WORD (Enumeration)

16#B3/01/7F = 179/01/127 CSLOUT Configuration and settings R/WS WORD (Enumeration)

16#B3/01/7D = 179/01/125 CSLOUT Configuration and settings R/WS WORD (Enumeration)

16#B3/01/7E = 179/01/126 CSLOUT Configuration and settings R/WS WORD (Enumeration)

16#7F/01/0C = 127/01/12 Status parameters R UINT (Unsigned16)

Configuration and settings R/W UINT (Unsigned32)
16#A6/01/3F = 166/01/63 Configuration and settings R/WS UINT (Unsigned16)
16#A6/01/3E = 166/01/62 Configuration and settings R/WS INT (Signed16)
16#B4/01/1C = 180/01/28 Configuration and settings R/W INT (Signed16)

16#B0/01/B6 = 176/01/182 APPS Status parameters R WORD (Enumeration)

PKTP Status parameters R WORD (Enumeration)

16#77/01/53 = 119/01/83 AIOL Configuration and settings R/WS WORD (Enumeration)

16#B4/01/34 = 180/01/52 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#89/01/3F = 137/01/63 Configuration and settings R/WS UINT (Unsigned16)
16#B4/01/A5 = 180/01/165 ECFG Configuration and settings R/WS WORD (Enumeration)
16#B4/01/A6 = 180/01/166 ECFG Configuration and settings R/WS WORD (Enumeration)
16#B4/01/2C = 180/01/44 Status parameters R UINT (Unsigned16)

16#B7/01/7A = 183/01/122 Configuration and settings R/WS INT (Signed16)

16#A6/01/58 = 166/01/88 Configuration and settings R/WS INT (Signed16)
16#B9/01/06 = 185/01/06 N_Y Configuration and settings R/WS WORD (Enumeration)
PVIS Configuration and settings R/W WORD (Enumeration)
16#B4/01/10 = 180/01/16 Configuration and settings R/W UINT (Unsigned16)

16#B3/01/B5 = 179/01/181 Configuration and settings R/WS UINT (Unsigned32)

16#B4/01/03 = 180/01/03 BCS Status parameters R WORD (Enumeration)

16#B4/01/79 = 180/01/121 IFM Configuration and settings R/WS WORD (Enumeration)

16#B3/01/AD = 179/01/173 Configuration and settings R/WS UINT (Unsigned32)

16#84/01/97 = 132/01/151 N_Y Configuration and settings R/WS WORD (Enumeration)
RDS Configuration and settings R WORD (Enumeration)
16#B7/01/7D = 183/01/125 Configuration and settings R/WS INT (Signed16)

# Internal
16#B7/01/7C = 183/01/124 Configuration and settings R/WS INT (Signed16)
16#B7/01/79 = 183/01/121 Configuration and settings R/WS INT (Signed16)
16#B7/01/7B = 183/01/123 Configuration and settings R/WS INT (Signed16)
FWST Status parameters R WORD (Enumeration)
16#B7/01/70 = 183/01/112 Configuration and settings R/WS INT (Signed16)
16#75/01/31 = 117/01/49 Configuration and settings R/WS UINT (Unsigned16)
16#AF/01/75 = 175/01/117 Status parameters R INT (Signed16)

16#B7/01/89 = 183/01/137 Configuration and settings R/W UINT (Unsigned16)

16#AF/01/69 = 175/01/105 PSA Configuration and settings R/WS WORD (Enumeration)

16#AF/01/AD = 175/01/173 Configuration and settings R/WS UINT (Unsigned16)

16#B3/01/6E = 179/01/110 MPS Status parameters R WORD (Enumeration)

16#B4/01/24 = 180/01/36 Configuration and settings R/W UINT (Unsigned16)

16#B3/01/6C = 179/01/108 Configuration and settings R/WS UINT (Unsigned16)

16#B3/01/A5 = 179/01/165 Configuration and settings R/WS UINT (Unsigned32)

16#71/01/4B = 113/01/75 Configuration and settings R/WS UINT (Unsigned32)

16#B4/01/44 = 180/01/68 Configuration and settings R/W UINT (Unsigned16)

16#B3/01/A9 = 179/01/169 Configuration and settings R/WS UINT (Unsigned32)
Configuration and settings R/W UINT (Unsigned16)
16#B3/01/A1 = 179/01/161 Configuration and settings R/WS UINT (Unsigned32)
16#B3/01/72 = 179/01/114 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B3/01/73 = 179/01/115 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B3/01/74 = 179/01/116 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B3/01/75 = 179/01/117 PSLIN Configuration and settings R/WS WORD (Enumeration)

Configuration and settings R/W UINT (Unsigned32)

16#76/01/65 = 118/01/101 NPL Configuration and settings R/WS WORD (Enumeration)
16#76/01/66 = 118/01/102 Configuration and settings R/WS UINT (Unsigned16)
16#8B/01/7A = 139/01/122 Configuration and settings R/W INT (Signed16)
16#8B/01/7B = 139/01/123 Configuration and settings R/W INT (Signed16)
16#8B/01/7C = 139/01/124 Configuration and settings R/W INT (Signed16)
16#8B/01/7E = 139/01/126 Configuration and settings R/W INT (Signed16)
16#B7/01/88 = 183/01/136 ECFG Configuration and settings R/WS WORD (Enumeration)
16#B3/01/A3 = 179/01/163 Configuration and settings R/WS UINT (Unsigned32)
16#B4/01/0C = 180/01/12 Configuration and settings R/W INT (Signed16)

16#B4/01/0E = 180/01/14 Configuration and settings R/W UINT (Unsigned16)

16#A6/01/53 = 166/01/83 Status parameters R INT (Signed16)

Configuration and settings R/W UINT (Unsigned32)
16#82/01/21 = 130/01/33 Configuration and settings R/W UINT (Unsigned16)
16#76/01/72 = 118/01/114 Configuration and settings R/WS UINT (Unsigned16)
16#B3/01/B7 = 179/01/183 Configuration and settings R/WS UINT (Unsigned32)
16#B3/01/6A = 179/01/106 MPPC Configuration and settings R/WS WORD (Enumeration)

16#7F/01/3A = 127/01/58 NMTS Status parameters R WORD (Enumeration)

EMDT Configuration and settings R/W WORD (Enumeration)
16#B3/01/99 = 179/01/153 PXS Status parameters R WORD (Enumeration)
16#B4/01/94 = 180/01/148 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/68 = 118/01/104 NPL Configuration and settings R/WS WORD (Enumeration)
16#76/01/69 = 118/01/105 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/6A = 118/01/106 Configuration and settings R/WS UINT (Unsigned16)
16#A2/01/19 = 162/01/25 Status parameters R UINT (Unsigned16)

# Internal
 16#A2/01/16 = 162/01/22 Status parameters R UINT (Unsigned16)
16#A2/01/17 = 162/01/23 Status parameters R UINT (Unsigned16)
16#A2/01/18 = 162/01/24 Status parameters R UINT (Unsigned16)
16#B3/01/96 = 179/01/150 Configuration and settings R/WS UINT (Unsigned16)

CMDT Configuration and settings R/W WORD (Enumeration)

CNL Status parameters R WORD (Enumeration)
16#A5/01/0D = 165/01/13 CSLOUT Configuration and settings R/WS WORD (Enumeration)
16#B9/01/07 = 185/01/07 N_Y Configuration and settings R/WS WORD (Enumeration)
16#B4/01/45 = 180/01/69 Configuration and settings R/W UINT (Unsigned16)
16#B4/01/95 = 180/01/149 Configuration and settings R/WS UINT (Unsigned16)
16#B4/01/96 = 180/01/150 Configuration and settings R/WS UINT (Unsigned16)
16#B4/01/97 = 180/01/151 Configuration and settings R/WS UINT (Unsigned16)
16#A2/01/03 = 162/01/03 Configuration and settings R UINT (Unsigned16)
16#82/01/05 = 130/01/05 FOR Configuration and settings R/W WORD (Enumeration)
16#70/01/07 = 112/01/07 LAC Configuration and settings R/W WORD (Enumeration)
16#84/01/19 = 132/01/25 AFFL Configuration and settings R/W WORD (Enumeration)

16#A5/01/11 = 165/01/17 Configuration and settings R/WS UINT (Unsigned16)

16#A5/01/10 = 165/01/16 Configuration and settings R/WS UINT (Unsigned16)
16#B7/01/86 = 183/01/134 Configuration and settings R/W UINT (Unsigned16)
16#B4/01/63 = 180/01/99 Configuration and settings R/W UINT (Unsigned16)
16#76/01/6C = 118/01/108 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/6D = 118/01/109 Configuration and settings R/WS UINT (Unsigned16)
COM1 Status parameters R WORD (Enumeration)
COM1 Status parameters R WORD (Enumeration)
16#B3/01/9A = 179/01/154 PXS Status parameters R WORD (Enumeration)
16#B3/01/90 = 179/01/144 PXCT Status parameters R WORD (Enumeration)
16#A2/01/05 = 162/01/05 Configuration and settings R UINT (Unsigned16)
16#A2/01/04 = 162/01/04 Configuration and settings R UINT (Unsigned16)
16#A2/01/02 = 162/01/02 Configuration and settings R UINT (Unsigned16)
16#A5/01/0E = 165/01/14 CSLOUT Configuration and settings R/WS WORD (Enumeration)
16#7F/01/3C = 127/01/60 Status parameters R UINT (Unsigned16)
16#76/01/6B = 118/01/107 NPL Configuration and settings R/WS WORD (Enumeration)
16#B0/01/1A = 176/01/26 Configuration and settings R/W UINT (Unsigned16)

16#B9/01/04 = 185/01/04 N_Y Configuration and settings R/WS WORD (Enumeration)

16#79/01/40 = 121/01/64 CSA Configuration and settings R WORD (Enumeration)

16#7A/01/2C = 122/01/44 PSL Configuration and settings R/WS WORD (Enumeration)

16#7A/01/2B = 122/01/43 PSL Configuration and settings R/WS WORD (Enumeration)
16#7A/01/2A = 122/01/42 PSL Configuration and settings R/WS WORD (Enumeration)
16#7A/01/29 = 122/01/41 PSL Configuration and settings R WORD (Enumeration)
16#7B/01/5B = 123/01/91 AVOT Configuration and settings R/WS WORD (Enumeration)
16#7A/01/2F = 122/01/47 PSL Configuration and settings R/WS WORD (Enumeration)
16#7A/01/2E = 122/01/46 PSL Configuration and settings R/WS WORD (Enumeration)
16#7A/01/2D = 122/01/45 PSL Configuration and settings R/WS WORD (Enumeration)
16#B7/01/87 = 183/01/135 Configuration and settings R/W UINT (Unsigned16)
16#B3/01/91 = 179/01/145 PXCT Status parameters R WORD (Enumeration)
16#B3/01/9B = 179/01/155 PXS Status parameters R WORD (Enumeration)
16#B4/01/11 = 180/01/17 Configuration and settings R/W UINT (Unsigned16)

16#7F/01/3B = 127/01/59 Status parameters R UINT (Unsigned16)

Configuration and settings R/W UINT (Unsigned16)
N_Y Configuration and settings R/W WORD (Enumeration)
N_Y Configuration and settings R/W WORD (Enumeration)
16#B3/01/70 = 179/01/112 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B3/01/71 = 179/01/113 PSLIN Configuration and settings R/WS WORD (Enumeration)

# Internal
16#76/01/6E = 118/01/110 NPL Configuration and settings R/WS WORD (Enumeration)
16#76/01/70 = 118/01/112 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/6F = 118/01/111 Configuration and settings R/WS UINT (Unsigned16)
Configuration and settings R/W UINT (Unsigned16)
PMDT Configuration and settings R/W WORD (Enumeration)
LKON Configuration and settings R/W WORD (Enumeration)
16#A2/01/20 = 162/01/32 Status parameters R UINT (Unsigned16)
16#7F/01/0B = 127/01/11 Status parameters R UINT (Unsigned16)
16#79/01/3F = 121/01/63 CSA Configuration and settings R WORD (Enumeration)

16#B4/01/2B = 180/01/43 Configuration and settings R/WS INT (Signed16)

16#B4/01/2A = 180/01/42 Configuration and settings R/WS INT (Signed16)
16#B4/01/62 = 180/01/98 Configuration and settings R/W UINT (Unsigned16)
16#B4/01/23 = 180/01/35 Configuration and settings R/WS UINT (Unsigned16)
16#7B/01/59 = 123/01/89 AVOT Configuration and settings R/WS WORD (Enumeration)
16#B4/01/4C = 180/01/76 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/4D = 180/01/77 Configuration and settings R/W UINT (Unsigned16)

16#A6/01/50 = 166/01/80 Configuration and settings R/WS UINT (Unsigned16)

16#B4/01/35 = 180/01/53 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#9B/01/A5 = 155/01/165 Configuration and settings R/W INT (Signed16)
16#B1/01/3D = 177/01/61 Configuration and settings R/W UINT (Unsigned16)

16#76/01/71 = 118/01/113 NPL Configuration and settings R/WS WORD (Enumeration)

16#76/01/73 = 118/01/115 Configuration and settings R/WS UINT (Unsigned16)
16#B4/01/93 = 180/01/147 Configuration and settings R/WS UINT (Unsigned16)
16#B4/01/92 = 180/01/146 Configuration and settings R/WS UINT (Unsigned16)
16#B4/01/91 = 180/01/145 Configuration and settings R/WS UINT (Unsigned16)
16#B3/01/A7 = 179/01/167 Configuration and settings R/WS UINT (Unsigned32)
16#B3/01/92 = 179/01/146 PXCT Status parameters R WORD (Enumeration)
16#B3/01/C5 = 179/01/197 PNID Status parameters R WORD (Enumeration)
16#75/01/2C = 117/01/44 Configuration and settings R/WS UINT (Unsigned16)
16#82/01/22 = 130/01/34 Configuration and settings R/W UINT (Unsigned16)
IPM Configuration and settings R/W WORD (Enumeration)
16#A5/01/0F = 165/01/15 Configuration and settings R/WS UINT (Unsigned16)
16#A5/01/13 = 165/01/19 Configuration and settings R/WS UINT (Unsigned16)
16#A5/01/12 = 165/01/18 Configuration and settings R/WS UINT (Unsigned16)
16#A2/01/2D = 162/01/45 Status parameters R UINT (Unsigned16)
16#A2/01/2A = 162/01/42 Status parameters R UINT (Unsigned16)
16#A2/01/2C = 162/01/44 Status parameters R UINT (Unsigned16)
16#A2/01/2B = 162/01/43 Status parameters R UINT (Unsigned16)
16#8B/01/1B = 139/01/27 SCDX Configuration and settings R/WS WORD (Enumeration)
16#8B/01/1A = 139/01/26 SCDX Configuration and settings R/WS WORD (Enumeration)
16#B3/01/A0 = 179/01/160 PNID Status parameters R WORD (Enumeration)
IPM Configuration and settings R/W WORD (Enumeration)
16#B4/01/37 = 180/01/55 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B3/01/9C = 179/01/156 PXS Status parameters R WORD (Enumeration)
16#B4/01/22 = 180/01/34 Configuration and settings R/W UINT (Unsigned16)

PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B9/01/02 = 185/01/02 N_Y Configuration and settings R/WS WORD (Enumeration)
16#75/01/2F = 117/01/47 Configuration and settings R/WS UINT (Unsigned16)

# Internal
 16#B4/01/36 = 180/01/54 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B4/01/6B = 180/01/107 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B4/01/39 = 180/01/57 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B4/01/38 = 180/01/56 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B3/01/6D = 179/01/109 ECFG Configuration and settings R/WS WORD (Enumeration)

16#84/01/1B = 132/01/27 N_Y Configuration and settings R/WS WORD (Enumeration)

16#82/01/06 = 130/01/06 Configuration and settings R/W UINT (Unsigned16)
16#82/01/3E = 130/01/62 Configuration and settings R/W UINT (Unsigned16)
16#82/01/41 = 130/01/65 Configuration and settings R/W UINT (Unsigned16)
16#B4/01/28 = 180/01/40 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B4/01/27 = 180/01/39 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#79/01/3E = 121/01/62 CSA Configuration and settings R WORD (Enumeration)

16#7B/01/58 = 123/01/88 AVOT Configuration and settings R/WS WORD (Enumeration)

16#9C/01/BC = 156/01/188 Configuration and settings R/W UINT (Unsigned16)

16#B3/01/9D = 179/01/157 PXS Status parameters R WORD (Enumeration)

16#B3/01/B3 = 179/01/179 Configuration and settings R/WS UINT (Unsigned32)
16#76/01/67 = 118/01/103 Configuration and settings R/WS UINT (Unsigned16)
16#A2/01/48 = 162/01/72 Configuration and settings R UINT (Unsigned16)
16#76/01/74 = 118/01/116 NPL Configuration and settings R/WS WORD (Enumeration)
16#76/01/76 = 118/01/118 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/75 = 118/01/117 Configuration and settings R/WS UINT (Unsigned16)
IPM Configuration and settings R/W WORD (Enumeration)
16#B4/01/41 = 180/01/65 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/42 = 180/01/66 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/3F = 180/01/63 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/3E = 180/01/62 Configuration and settings R/W UINT (Unsigned16)

16#B0/01/18 = 176/01/24 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B4/01/AA = 180/01/170 ECFG Configuration and settings R/WS WORD (Enumeration)
16#B4/01/AB = 180/01/171 ECFG Configuration and settings R/WS WORD (Enumeration)
16#75/01/2B = 117/01/43 Configuration and settings R/WS UINT (Unsigned16)
16#A2/01/47 = 162/01/71 Configuration and settings R UINT (Unsigned16)
Configuration and settings R/W UINT (Unsigned32)
16#B3/01/C0 = 179/01/192 Status parameters R UINT (Unsigned16)

16#B3/01/98 = 179/01/152 PXS Status parameters R WORD (Enumeration)

Configuration and settings R/W UINT (Unsigned32)
16#B4/01/19 = 180/01/25 Configuration and settings R/W INT (Signed16)

16#B4/01/1A = 180/01/26 Configuration and settings R/W UINT (Unsigned16)

16#B3/01/93 = 179/01/147 PXCT Status parameters R WORD (Enumeration)

16#B4/01/4E = 180/01/78 Configuration and settings R/W INT (Signed16)
16#B4/01/04 = 180/01/04 Configuration and settings R/WS UINT (Unsigned16)
16#B0/01/19 = 176/01/25 Configuration and settings R/W INT (Signed16)

16#B3/01/68 = 179/01/104 Configuration and settings R/WS UINT (Unsigned16)

16#A2/01/68 = 162/01/104 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B0/01/75 = 176/01/117 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B0/01/76 = 176/01/118 Configuration and settings R/W INT (Signed16)
16#B3/01/BF = 179/01/191 Status parameters R UINT (Unsigned16)

16#A2/01/36 = 162/01/54 Status parameters R UINT (Unsigned16)

16#A2/01/35 = 162/01/53 Status parameters R UINT (Unsigned16)
16#A2/01/34 = 162/01/52 Status parameters R UINT (Unsigned16)

# Internal
 16#A2/01/37 = 162/01/55 Status parameters R UINT (Unsigned16)
16#76/01/78 = 118/01/120 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/79 = 118/01/121 Configuration and settings R/WS UINT (Unsigned16)
16#76/01/77 = 118/01/119 NPL Configuration and settings R/WS WORD (Enumeration)
16#B4/01/68 = 180/01/104 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#75/01/2A = 117/01/42 Configuration and settings R/WS UINT (Unsigned16)

16#B1/01/1F = 177/01/31 Configuration and settings R INT (Signed16)

16#B1/01/20 = 177/01/32 Configuration and settings R INT (Signed16)

16#B7/01/65 = 183/01/101 N_Y Configuration and settings R/WS WORD (Enumeration)

16#BA/01/6B = 186/01/107 STAC Configuration and settings R/W WORD (Enumeration)
16#BA/01/6A = 186/01/106 STAC Status parameters R WORD (Enumeration)
16#B3/01/AF = 179/01/175 Configuration and settings R/WS UINT (Unsigned32)
Configuration and settings R/W UINT (Unsigned32)
16#BA/01/6D = 186/01/109 STV Status parameters R WORD (Enumeration)
16#BA/01/6C = 186/01/108 STS Status parameters R WORD (Enumeration)
16#B4/01/1D = 180/01/29 Configuration and settings R/W INT (Signed16)

16#76/01/5C = 118/01/92 N_Y Configuration and settings R/WS WORD (Enumeration)

16#B4/01/20 = 180/01/32 LCNT Configuration and settings R/WS WORD (Enumeration)
16#A7/01/97 = 167/01/151 Configuration and settings R/WS UINT (Unsigned16)
16#B4/01/6C = 180/01/108 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B4/01/6E = 180/01/110 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B4/01/6D = 180/01/109 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#B4/01/6F = 180/01/111 PSLIN Configuration and settings R/WS WORD (Enumeration)
16#A5/01/9F = 165/01/159 Status parameters R UINT (Unsigned32)
16#B4/01/47 = 180/01/71 Configuration and settings R/W UINT (Unsigned16)
16#B4/01/5D = 180/01/93 Configuration and settings R/W UINT (Unsigned16)

16#91/01/5A = 145/01/90 Status parameters R UINT (Unsigned16)

16#91/01/59 = 145/01/89 Status parameters R UINT (Unsigned16)
16#A2/01/23 = 162/01/35 Status parameters R UINT (Unsigned16)
16#A2/01/21 = 162/01/33 Status parameters R UINT (Unsigned16)
16#A2/01/22 = 162/01/34 Status parameters R UINT (Unsigned16)
16#91/01/58 = 145/01/88 TQNC Configuration and settings R/WS WORD (Enumeration)
N_Y Configuration and settings R/W WORD (Enumeration)

# Internal
16#77/01/56 = 119/01/86 AIOL Configuration and settings R/WS WORD (Enumeration)

16#9C/01/BB = 156/01/187 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/69 = 180/01/105 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#B4/01/6A = 180/01/106 PSLIN Configuration and settings R/WS WORD (Enumeration)
FWER Status parameters R WORD (Enumeration)
16#B4/01/0D = 180/01/13 Configuration and settings R/W INT (Signed16)

16#B4/01/A1 = 180/01/161 ECFG Configuration and settings R/WS WORD (Enumeration)

16#B3/01/AB = 179/01/171 Configuration and settings R/WS UINT (Unsigned32)

16#B4/01/1B = 180/01/27 Configuration and settings R/W INT (Signed16)

MDT Configuration and settings R/W WORD (Enumeration)

16#75/01/29 = 117/01/41 Configuration and settings R/WS UINT (Unsigned16)
16#B4/01/25 = 180/01/37 LCPM Configuration and settings R/WS WORD (Enumeration)
16#B4/01/46 = 180/01/70 Status parameters R INT (Signed16)
16#B3/01/79 = 179/01/121 PSLIN Configuration and settings R/WS WORD (Enumeration)

16#A6/01/52 = 166/01/82 Status parameters R INT (Signed16)

16#B4/01/90 = 180/01/144 Configuration and settings R/WS UINT (Unsigned16)

16#B4/01/8D = 180/01/141 Configuration and settings R/WS UINT (Unsigned16)

16#B4/01/8F = 180/01/143 Configuration and settings R/WS UINT (Unsigned16)

16#B4/01/8E = 180/01/142 Configuration and settings R/WS UINT (Unsigned16)

16#B9/01/01 = 185/01/01 N_Y Configuration and settings R/WS WORD (Enumeration)

16#A2/01/0C = 162/01/12 Configuration and settings R UINT (Unsigned16)
16#A2/01/0E = 162/01/14 Configuration and settings R UINT (Unsigned16)
16#A2/01/0D = 162/01/13 Configuration and settings R UINT (Unsigned16)
16#A2/01/0F = 162/01/15 Configuration and settings R UINT (Unsigned16)
16#B4/01/A4 = 180/01/164 ECFG Configuration and settings R/WS WORD (Enumeration)

16#A6/01/59 = 166/01/89 N_Y Configuration and settings R/WS WORD (Enumeration)

# Internal
16#77/01/57 = 119/01/87 AIOL Configuration and settings R/WS WORD (Enumeration)

16#B4/01/55 = 180/01/85 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/56 = 180/01/86 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/57 = 180/01/87 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/52 = 180/01/82 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/53 = 180/01/83 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/40 = 180/01/64 Configuration and settings R/W UINT (Unsigned16)

16#A5/01/9D = 165/01/157 Status parameters R UINT (Unsigned32)

16#75/01/30 = 117/01/48 Configuration and settings R/WS UINT (Unsigned16)
16#B7/01/66 = 183/01/102 VCCS Status parameters R WORD (Enumeration)
FCSI Configuration and settings R/WS WORD (Enumeration)
16#B4/01/26 = 180/01/38 ECFG Configuration and settings R/WS WORD (Enumeration)
CNL Status parameters R WORD (Enumeration)
16#B7/01/72 = 183/01/114 Configuration and settings R/WS INT (Signed16)
16#B1/01/0A = 177/01/10 Configuration and settings R INT (Signed16)

16#B1/01/09 = 177/01/09 Configuration and settings R INT (Signed16)

16#B7/01/6F = 183/01/111 Configuration and settings R/WS INT (Signed16)

16#71/01/4D = 113/01/77 Configuration and settings R/WS UINT (Unsigned32)
16#B4/01/17 = 180/01/23 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/A8 = 180/01/168 ECFG Configuration and settings R/WS WORD (Enumeration)

16#B4/01/83 = 180/01/131 IFM Configuration and settings R/WS WORD (Enumeration)
16#B4/01/80 = 180/01/128 IFM Configuration and settings R/WS WORD (Enumeration)
16#B4/01/A9 = 180/01/169 ECFG Configuration and settings R/WS WORD (Enumeration)
16#B4/01/82 = 180/01/130 IFM Configuration and settings R/WS WORD (Enumeration)
16#B4/01/81 = 180/01/129 IFM Configuration and settings R/WS WORD (Enumeration)
16#B4/01/7A = 180/01/122 IFM Configuration and settings R/WS WORD (Enumeration)

16#B4/01/7B = 180/01/123 IFM Configuration and settings R/WS WORD (Enumeration)

IPAE Configuration and settings R/W WORD (Enumeration)

# Internal
 N_Y Configuration and settings R/W WORD (Enumeration)
16#B4/01/7C = 180/01/124 IFM Configuration and settings R/WS WORD (Enumeration)

16#B3/01/97 = 179/01/151 Configuration and settings R/W UINT (Unsigned16)

16#AF/01/7A = 175/01/122 Status parameters R INT (Signed16)

16#B4/01/21 = 180/01/33 LCST Configuration and settings R/WS WORD (Enumeration)
16#AF/01/79 = 175/01/121 PSA Configuration and settings R/WS WORD (Enumeration)

16#77/01/54 = 119/01/84 AIOL Configuration and settings R/WS WORD (Enumeration)

16#A6/01/56 = 166/01/86 Configuration and settings R/WS INT (Signed16)

16#82/01/3F = 130/01/63 Configuration and settings R/W UINT (Unsigned16)
16#B4/01/29 = 180/01/41 LCS Status parameters R WORD (Enumeration)

16#7F/01/1F = 127/01/31 Status parameters R UINT (Unsigned16)

16#B4/01/1F = 180/01/31 LCM Configuration and settings R/WS WORD (Enumeration)
16#B3/01/C4 = 179/01/196 PNID Status parameters R WORD (Enumeration)
16#B3/01/C3 = 179/01/195 PNID Status parameters R WORD (Enumeration)
SCS Configuration and settings R/WS WORD (Enumeration)
16#A6/01/55 = 166/01/85 DCRC Configuration and settings R/WS WORD (Enumeration)
16#B7/01/67 = 183/01/103 VCLM Configuration and settings R/WS WORD (Enumeration)
16#B7/01/69 = 183/01/105 PSLIN Configuration and settings R/WS WORD (Enumeration)
N_Y Configuration and settings R/W WORD (Enumeration)
16#A6/01/54 = 166/01/84 Status parameters R UINT (Unsigned16)
16#B7/01/68 = 183/01/104 VCLS Status parameters R WORD (Enumeration)
16#B7/01/84 = 183/01/132 Configuration and settings R/W UINT (Unsigned16)
16#A6/01/85 = 166/01/133 Configuration and settings R/WS INT (Signed16)
16#75/01/32 = 117/01/50 Configuration and settings R/WS UINT (Unsigned16)
N_Y Configuration and settings R WORD (Enumeration)

N_Y Configuration and settings R WORD (Enumeration)

16#B4/01/7D = 180/01/125 IFM Configuration and settings R/WS WORD (Enumeration)

16#B4/01/7E = 180/01/126 IFM Configuration and settings R/WS WORD (Enumeration)
16#B4/01/7F = 180/01/127 IFM Configuration and settings R/WS WORD (Enumeration)
16#B3/01/B1 = 179/01/177 Configuration and settings R/WS UINT (Unsigned32)
16#B3/01/65 = 179/01/101 MPSA Configuration and settings R/WS WORD (Enumeration)

16#B4/01/01 = 180/01/01 N_Y Configuration and settings R/WS WORD (Enumeration)

16#B3/01/C8 = 179/01/200 Configuration and settings R/W UINT (Unsigned16)

# Internal
16#95/01/64 = 149/01/100 Configuration and settings R/WS UINT (Unsigned16)
N_Y Configuration and settings R/W WORD (Enumeration)
16#B4/01/0F = 180/01/15 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/12 = 180/01/18 Configuration and settings R/W UINT (Unsigned16)

16#B4/01/16 = 180/01/22 Configuration and settings R/W INT (Signed16)

16#B3/01/8D = 179/01/141 Configuration and settings R/W UINT (Unsigned16)

16#B3/01/83 = 179/01/131 CSLOUT Configuration and settings R/WS WORD (Enumeration)

16#B4/01/5E = 180/01/94 Configuration and settings R/W UINT (Unsigned16)

16#B7/01/6C = 183/01/108 Configuration and settings R/WS UINT (Unsigned16)
16#B4/01/A3 = 180/01/163 ECFG Configuration and settings R/WS WORD (Enumeration)

16#B4/01/A2 = 180/01/162 ECFG Configuration and settings R/WS WORD (Enumeration)

16#A2/01/69 = 162/01/105 CSLOUT Configuration and settings R/WS WORD (Enumeration)

16#B7/01/6A = 183/01/106 Configuration and settings R/WS UINT (Unsigned16)
16#B7/01/6B = 183/01/107 Configuration and settings R/WS UINT (Unsigned16)
16#B7/01/73 = 183/01/115 Configuration and settings R/WS INT (Signed16)
16#B7/01/71 = 183/01/113 Configuration and settings R/WS INT (Signed16)
16#77/01/55 = 119/01/85 AIOL Configuration and settings R/WS WORD (Enumeration)

16#76/01/5B = 118/01/91 N_Y Configuration and settings R/WS WORD (Enumeration)

16#B3/01/8F = 179/01/143 PXCT Status parameters R WORD (Enumeration)
16#75/01/2E = 117/01/46 Configuration and settings R/WS UINT (Unsigned16)
16#B7/01/85 = 183/01/133 Configuration and settings R/W UINT (Unsigned16)
16#A2/01/67 = 162/01/103 Configuration and settings R/W UINT (Unsigned16)
16#B4/01/43 = 180/01/67 Configuration and settings R/W UINT (Unsigned16)

16#89/01/2A = 137/01/42 ULR Configuration and settings R/W WORD (Enumeration)

16#B4/01/54 = 180/01/84 Configuration and settings R/W UINT (Unsigned16)

16#A6/01/82 = 166/01/130 Configuration and settings R/WS INT (Signed16)

# Internal
 Units Factory setting Range
-
-
- [No] NO

1 rpm 0 rpm -32767 rpm ... 32767 rpm

Refer to programming manual 0 -5000 ... 5000
1 0 ... 1000
1 0 -10000 ... 10000
1% 0 % ... 100 %

-
-

-
-
-
-
- [Default] TAB

-
1 rpm -32767 rpm ... 32767 rpm
0.1 Hz -3276.7 Hz ... 3276.7 Hz
0.1 % -3276.7 % ... 3276.7 %
Refer to programming manual 0 ... 65535

1V 0 V ... 65535 V
1% -32767 % ... 32767 %
1 rpm -32767 rpm ... 32767 rpm
1 rpm -32767 rpm ... 32767 rpm
0.1 Hz -500.0 Hz ... 500.0 Hz

0.1 Hz -3276.7 Hz ... 3276.7 Hz

Refer to programming manual 0 ... 65535

Refer to programming manual 0 ... 65535

Refer to programming manual -32767 ... 32767

0.1 Hz -3276.7 Hz ... 3276.7 Hz
0.1 V 0.0 V ... 6553.5 V
1% 0 % ... 200 %
1% 0 % ... 200 %

1s 0 s ... 4294967295 s
1s 0 s ... 4294967295 s
-
-
Refer to programming manual -32767 ... 32767
1 -32767 ... 32767
Refer to programming manual -32767 ... 32767
1 -32767 ... 32767

# Internal
Refer to programming manual -32767 ... 32767
1 -32767 ... 32767
Refer to programming manual -32767 ... 32767
1 -32767 ... 32767
-
-
-
1 0 ... 65535

1 0 ... 65535

1 0 ... 65535
-
0.1 V 0.0 V ... 6553.5 V
Refer to programming manual -32767 ... 32767
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1% 0 % ... 65535 %
-
-
-
-
-
-
1h 0 h ... 65535 h
0.1 % -3276.7 % ... 3276.7 %
1% 0 % ... 255 %
1 °C 0 °C ... 255 °C
1 Hz 0 Hz ... 65535 Hz
-
0.1 V 0.0 V ... 6553.5 V
Refer to programming manual -32767 ... 32767
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1% 0 % ... 65535 %
-
-
-
-
-
-
1h 0 h ... 65535 h
0.1 % -3276.7 % ... 3276.7 %
1% 0 % ... 255 %
1 °C 0 °C ... 255 °C
1 Hz 0 Hz ... 65535 Hz
-
0.1 V 0.0 V ... 6553.5 V
Refer to programming manual -32767 ... 32767
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1% 0 % ... 65535 %
-
-
-
-
-
-
1h 0 h ... 65535 h
0.1 % -3276.7 % ... 3276.7 %
1% 0 % ... 255 %

# Internal
 1 °C 0 °C ... 255 °C
1 Hz 0 Hz ... 65535 Hz
-
0.1 V 0.0 V ... 6553.5 V
Refer to programming manual -32767 ... 32767
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1% 0 % ... 65535 %
-
-
-
-
-
-
1h 0 h ... 65535 h
0.1 % -3276.7 % ... 3276.7 %
1% 0 % ... 255 %
1 °C 0 °C ... 255 °C
1 Hz 0 Hz ... 65535 Hz
-
0.1 V 0.0 V ... 6553.5 V
Refer to programming manual -32767 ... 32767
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1% 0 % ... 65535 %
-
-
-
-
-
-
1h 0 h ... 65535 h
0.1 % -3276.7 % ... 3276.7 %
1% 0 % ... 255 %
1 °C 0 °C ... 255 °C
1 Hz 0 Hz ... 65535 Hz
-
0.1 V 0.0 V ... 6553.5 V
Refer to programming manual -32767 ... 32767
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1% 0 % ... 65535 %
-
-
-
-
-
-
1h 0 h ... 65535 h
0.1 % -3276.7 % ... 3276.7 %
1% 0 % ... 255 %
1 °C 0 °C ... 255 °C
1 Hz 0 Hz ... 65535 Hz
-
0.1 V 0.0 V ... 6553.5 V
Refer to programming manual -32767 ... 32767
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1% 0 % ... 65535 %
-
-
-
-
-
-

# Internal
 1h 0 h ... 65535 h
0.1 % -3276.7 % ... 3276.7 %
1% 0 % ... 255 %
1 °C 0 °C ... 255 °C
1 Hz 0 Hz ... 65535 Hz
-
0.1 V 0.0 V ... 6553.5 V
Refer to programming manual -32767 ... 32767
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1% 0 % ... 65535 %
-
-
-
-
-
-
1h 0 h ... 65535 h
0.1 % -3276.7 % ... 3276.7 %
1% 0 % ... 255 %
1 °C 0 °C ... 255 °C
1 Hz 0 Hz ... 65535 Hz
-
0.1 V 0.0 V ... 6553.5 V
Refer to programming manual -32767 ... 32767
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1% 0 % ... 65535 %
-
-
-
-
-
-
1h 0 h ... 65535 h
0.1 % -3276.7 % ... 3276.7 %
1% 0 % ... 255 %
1 °C 0 °C ... 255 °C
1 Hz 0 Hz ... 65535 Hz
- [Unknown rating] NO
- [Unkown voltage] NO
Refer to programming manual Refer to programming manual 0 ... 65535
1 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535

# Internal
 1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 rpm 0 rpm ... 65535 rpm
1 rpm 0 rpm ... 65535 rpm
1 rpm 1 rpm ... 4294967295 rpm
1s 0 s ... 65535 s
1 rpm 1 rpm ... 4294967295 rpm
1 1 -32768 ... 32767
1 1 -32768 ... 32767
- [Ramp stop] RMP
- [Fast stop then disable voltage] FST2
- [No] NO
- [No] NO
- BIT1
- [Not assigned] NO
- [Not assigned] NO
-
1 0 0 ... 1
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535

# Internal
 1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz

0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz

Refer to programming manual Refer to programming manual 0 ... 65535

1% 40 % 0 % ... 1000 %

1% 40 % 0 % ... 1000 %

1 ms Refer to programming manual 1 ms ... 65535 ms

1 Refer to programming manual 0 ... 100

0.01 1.00 0.10 ... 100.00

- [Standard] STD
Refer to programming manual 0 ... 65535
Refer to programming manual 0 0 ... 65535
0.1 g.m² 0.0 g.m² ... 6553.5 g.m²
1% 0% 0 % ... 200 %
1% 100 % 20 % ... 500 %
0.1 ms Refer to programming manual 0.0 ms ... 100.0 ms
0.1 ms 0.0 ms 0.0 ms ... 100.0 ms
Refer to programming manual Refer to programming manual 0 ... 65535

1% 100 % -300 % ... 300 %

1% 50 % -300 % ... 300 %

0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz

0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz

0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

# Internal
 0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 1.0 Hz 0.1 Hz ... 10.0 Hz

0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

- Refer to programming manual

Refer to programming manual Refer to programming manual 0 ... 65535

0.01 Refer to programming manual 0.50 ... 1.00

1V Refer to programming manual 100 V ... 690 V

Refer to programming manual Refer to programming manual 0 ... 65535

0.1 Hz Refer to programming manual 40.0 Hz ... 500.0 Hz

1 rpm Refer to programming manual 0 rpm ... 65535 rpm

0.1 Hz Refer to programming manual 10.0 Hz ... 500.0 Hz

- [No action] NO

- [No] NO
- [Not done] TAB

- [U/F VC Quadratic] UFQ

1V 0V 0 V ... 800 V
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz
1V 0V 0 V ... 800 V
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz
1V 0V 0 V ... 800 V
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz
1V 0V 0 V ... 800 V
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz
1V 0V 0 V ... 800 V
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz
Refer to programming manual Refer to programming manual 0 ... 65535
1 rpm Refer to programming manual 0 rpm ... 65535 rpm
1 Refer to programming manual 1 ... 240
Refer to programming manual Refer to programming manual 1 ... 65535
0.1 mV/rpm 0.0 mV/rpm 0.0 mV/rpm ... 6553.5 mV/rpm
Refer to programming manual 0 0 ... 65535
Refer to programming manual 0 0 ... 65535
Refer to programming manual 0 0 ... 65535
1% 100 % 0 % ... 200 %

1% Refer to programming manual 0 % ... 300 %

1 Refer to programming manual 1 ... 100

1% 20 % 0 % ... 100 %
1% 20 % 0 % ... 100 %
Refer to programming manual 0 0 ... 65535
Refer to programming manual 0 0 ... 65535
Refer to programming manual 0 0 ... 65535
Refer to programming manual 0 0 ... 65535
0.1 Hz Refer to programming manual 10.0 Hz ... 500.0 Hz

# Internal
 0.1 kHz Refer to programming manual 1.0 kHz ... 16.0 kHz

Refer to programming manual Refer to programming manual 0 ... 65535

- [Switch.frequency type 1] HF1

- [No] NO
- Refer to programming manual
- [No] NO
- Refer to programming manual

- [Standard] STD

- [2-wire control] 2C

- [Transition] TRN
- Refer to programming manual
- [Standard ref template] BSD

- [Voltage] 10U

# Internal
0.1 V 0.0 V 0.0 V ... 10.0 V

0.1 V 10.0 V 0.0 V ... 10.0 V

0.01 s 0.00 s 0.00 s ... 10.00 s

1% 0% 0 % ... 100 %
1% 0% 0 % ... 100 %

# Internal
 - [Voltage] 10U

0.1 V 0.0 V 0.0 V ... 10.0 V

# Internal
0.1 V 10.0 V 0.0 V ... 10.0 V

0.01 s 0.00 s 0.00 s ... 10.00 s

1% 0% 0 % ... 100 %
1% 0% 0 % ... 100 %
- [Current] 0A

# Internal
0.1 mA 0.0 mA 0.0 mA ... 20.0 mA

0.1 mA 20.0 mA 0.0 mA ... 20.0 mA

0.01 s 0.00 s 0.00 s ... 10.00 s

1% 0% 0 % ... 100 %
1% 0% 0 % ... 100 %
- [Motor frequency] OFR

- [Current] 0A
0.1 mA 0.0 mA 0.0 mA ... 20.0 mA

0.1 mA 20.0 mA 0.0 mA ... 20.0 mA

0.1 V 0.0 V 0.0 V ... 10.0 V

0.1 V 10.0 V 0.0 V ... 10.0 V

# Internal
 0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 100.0 % 0.0 % ... 100.0 %

0.01 s 0.00 s 0.00 s ... 10.00 s

- Refer to programming manual

- [Yes] YES

- [Stop key priority] YES

- [Combined channel mode] SIM
- [Command channel 1] CD1
- [Terminal block] TER
- [Modbus communication] MDB
- Refer to programming manual
- Refer to programming manual
- [No copy] NO
-
-
-
-
- [Disabled] DIS
- [Reference frequency channel 1] FR1
- [Not configured] NO
- Refer to programming manual
- [Not configured] NO
- [Not configured] NO
- [Not configured] NO
- [Not configured] NO
- [Not configured] NO
- [Linear ramp] LIN
- [Tenths of seconds] 01

Refer to programming manual 100 0 ... 9999

Refer to programming manual 100 0 ... 9999

1% 10 % 0 % ... 100 %

1% 10 % 0 % ... 100 %

1% 10 % 0 % ... 100 %

1% 10 % 0 % ... 100 %

0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

- [Not assigned] NO
Refer to programming manual 50 1 ... 9999

Refer to programming manual 50 1 ... 9999

- Refer to programming manual

- [On ramp] RMP
0.1 Hz Refer to programming manual 0.2 Hz ... 500.0 Hz

# Internal
 - [Not assigned] NO
- [Not assigned] NO
1 4 0 ... 10

- [Not assigned] NO
Refer to programming manual Refer to programming manual 0 ... 65535

0.1 s 0.5 s 0.1 s ... 30.0 s

Refer to programming manual Refer to programming manual 0 ... 65535

0.1 s 0.5 s 0.1 s ... 30.0 s

- [No DC injection] NO
Refer to programming manual Refer to programming manual 0 ... 65535

0.1 s 0.5 s 0.1 s ... 30.0 s

Refer to programming manual Refer to programming manual 0 ... 65535

0.1 s 0.0 s 0.0 s ... 30.0 s

- Refer to programming manual

- Refer to programming manual
- Refer to programming manual
- [Not assigned] NO
0.1 Hz 10.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 15.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 20.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 25.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 30.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 35.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 40.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 45.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 50.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 55.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 60.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 70.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 80.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 90.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 100.0 Hz 0.0 Hz ... 500.0 Hz

- [Not assigned] NO
- [Not assigned] NO
- [No save] NO
- [Pulse Signal injection - Optimized] PSIO

1% 0% 0 % ... 300 %

# Internal
 - Refer to programming manual

Refer to programming manual 100 0 ... 32767

Refer to programming manual 1000 0 ... 32767

Refer to programming manual 150 0 ... 32767

Refer to programming manual 900 0 ... 32767

- [No] NO

Refer to programming manual 150 0 ... 32767

0.01 1.00 0.01 ... 100.00

0.01 1.00 0.01 ... 100.00

0.01 0.00 0.00 ... 100.00

0.1 s 0.0 s 0.0 s ... 99.9 s

- [No] NO

0.1 Hz 0.0 Hz -500.0 Hz ... 500.0 Hz

0.1 Hz 60.0 Hz 0.0 Hz ... 500.0 Hz

Refer to programming manual 100 0 ... 65535

Refer to programming manual 1000 0 ... 65535

Refer to programming manual 100 0 ... 65535

- Refer to programming manual

# Internal
 - [Not configured] NO

1% 100 % 1 % ... 100 %

- [Not assigned] NO

- [Not configured] NO

0.1 s 0.0 s 0.0 s ... 999.9 s

- Refer to programming manual

- Refer to programming manual

Refer to programming manual 300 0 ... 32767

Refer to programming manual 600 0 ... 32767

Refer to programming manual 900 0 ... 32767

- Refer to programming manual

-
- [Not assigned] NO

1s 5s 1 s ... 999 s

- [Not assigned] NO
- Refer to programming manual
- [No] NO
- [Not assigned] NO
- [No] NO

- [5 minutes] 5
- Refer to programming manual

- [Self cooled motor] ACL

1% 100 % 0 % ... 118 %

- [Freewheel stop] YES

- Refer to programming manual
0.1 s 0.5 s 0.5 s ... 10.0 s
- Refer to programming manual
- [Freewheel stop] YES
1% 100 % 0 % ... 118 %
- Refer to programming manual
- [Freewheel stop] YES
- [Error triggered] 0
- Refer to programming manual

# Internal
 1V Refer to programming manual 100 V ... 435 V
0.1 s 0.2 s 0.2 s ... 999.9 s
- [Inactive] NO
0.1 s 1.0 s 1.0 s ... 999.9 s
1V Refer to programming manual 141 V ... 495 V
0.01 s 1.00 s 0.01 s ... 60.00 s
1s 9999 s 1 s ... 9999 s
- Refer to programming manual
- [Measured] HWCOF
- [Ignore] NO
- [Not assigned] NO

- [Disabled] NO
0.1 Hz Refer to programming manual 0.0 Hz ... 6553.5 Hz
- [Freewheel stop] YES
- [Freewheel stop] YES
- [Freewheel stop] YES
- [Freewheel stop] YES
1 0 0 ... 9999
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

1 8501 0 ... 65535

1 8602 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 3201 0 ... 65535
1 8604 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 3201 0 ... 65535
1 8604 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 8501 0 ... 65535
1 8602 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535

# Internal
 1 0 0 ... 247
1 0 0 ... 247
- [19200 bps] 19200
- [8 bits even parity 1 stop bit] 8E1
0.1 s 10.0 s 0.1 s ... 30.0 s
1 0 0 ... 127
- [Baud rate 250kbps] 250K
1 0 ... 5

- [Not assigned] NO
- [Not configured] NO
0.1 s 10.0 s 0.1 s ... 30.0 s
1 Refer to programming manual 0 ... 65535

- Refer to programming manual

- [Master 1] 1

- [21/71] 21
- [Automatic] AUTO

- [Automatic] AUTO

- [Auto detected] AUTO

- 1
-
1 ms 5 ms 0 ms ... 200 ms
- [Device in operating state "Fault"] FLT
- Refer to programming manual
1 ms 5 ms 0 ms ... 200 ms
1 ms 0 ms 0 ms ... 60000 ms
1 ms 0 ms 0 ms ... 60000 ms
1 ms 5 ms 0 ms ... 200 ms
- [High level] POS
- [High level] POS
1 ms 5 ms 0 ms ... 200 ms
1 ms 0 ms 0 ms ... 9999 ms
1 ms 0 ms 0 ms ... 9999 ms
1 ms 5 ms 0 ms ... 200 ms
1 ms 5 ms 0 ms ... 200 ms
1 -32767 ... 32767
Refer to programming manual 0 ... 65535
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1 -32767 ... 32767
0.1 V 0.0 V ... 6553.5 V
1% -32767 % ... 32767 %
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
1s 0s 0 s ... 100 s
0.1 Hz 0.3 Hz 0.3 Hz ... 500.0 Hz

- [Freewheel stop] YES

0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

1% 0% 0 % ... 100 %

# Internal
 1% 60 % 20 % ... 100 %

1s 0s 0 s ... 100 s
- [Freewheel stop] YES
-
Refer to programming manual 50 1 ... 9999

Refer to programming manual 0 0 ... 9999

1 -32767 ... 32767

1 0 -32767 ... 32767

1 0 -32767 ... 32767

1 -32767 ... 32767

# Internal
1 0 -32767 ... 32767

1 0 -32767 ... 32767

1 -32767 ... 32767

1 0 -32767 ... 32767

# Internal
 1 0 -32767 ... 32767

Refer to programming manual -32767 ... 32767

1% 0% 0 % ... 100 %
0.01 s 0.00 s 0.00 s ... 10.00 s

1 -32767 ... 32767

1 0 -32767 ... 32767

1 0 -32767 ... 32767

1 -32767 ... 32767

1% 0% 0 % ... 100 %

# Internal
 - [Current] 0A

Refer to programming manual -32767 ... 32767

1% 0% 0 % ... 100 %
0.01 s 0.00 s 0.00 s ... 10.00 s

1 -32767 ... 32767

1 0 -32767 ... 32767

# Internal
1 0 -32767 ... 32767

1 -32767 ... 32767

1% 0% 0 % ... 100 %
- [Current] 0A

# Internal
 - [Not configured] NO

1 -32767 ... 32767

- [Motor current] OCR

Refer to programming manual -32767 ... 32767

0.01 s 0.00 s 0.00 s ... 10.00 s

1 -32767 ... 32767

1 -32767 ... 32767
- [Current] 0A
0.1 mA 20.0 mA 0.0 mA ... 20.0 mA

0.1 mA 0.0 mA 0.0 mA ... 20.0 mA

0.1 % 100.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 Hz 0.0 Hz 0.0 Hz ... 599.0 Hz

1s 20 s 0 s ... 9999 s

- [No] NO
0.1 Hz 0.0 Hz 0.0 Hz ... 599.0 Hz

- [No warning clearing] NO

Refer to programming manual 0 ... 4294967295
1s 0 s ... 4294967295 s
1s 0 s ... 4294967295 s
1s 0 s ... 4294967295 s
1s 0 s ... 4294967295 s
1s 0 s ... 4294967295 s
- [Not Configured] NO
- [Not Configured] NO
- [Not Configured] NO
- [Not Configured] NO
- [Not Configured] NO
1s 0s 0 s ... 4294967295 s
1s 0s 0 s ... 4294967295 s
1s 0s 0 s ... 4294967295 s
1s 0s 0 s ... 4294967295 s
1s 0s 0 s ... 4294967295 s

# Internal
 - [Drive in running State] 2
- [Drive in running State] 2
- [Drive in running State] 2
- [Drive in running State] 2
- [Drive in running State] 2
1 2162688 2162688 ... 4288616251
1 2162688 2162688 ... 4288616251
1 2162688 2162688 ... 4288616251
1 2162688 2162688 ... 4288616251
1 2162688 2162688 ... 4288616251
Refer to programming manual 0 0 ... 32767

-
-
-
-
-
-
-
0.1 t 0.0 t ... 429496729.5 t
0.1 mA 20.0 mA 0.0 mA ... 20.0 mA

# Internal
0.1 mA 20.0 mA 0.0 mA ... 20.0 mA

0.1 mA 20.0 mA 0.0 mA ... 20.0 mA

# Internal
0.1 mA 20.0 mA 0.0 mA ... 20.0 mA

0.1 mA 0.0 mA 0.0 mA ... 20.0 mA

# Internal
0.1 mA 0.0 mA 0.0 mA ... 20.0 mA

0.1 mA 0.0 mA 0.0 mA ... 20.0 mA

# Internal
 0.1 mA 0.0 mA 0.0 mA ... 20.0 mA

-
-
-
-
-
-
-
Refer to programming manual 0 0 ... 65535

0.1 Hz 0.0 Hz 0.0 Hz ... 599.0 Hz

0.1 Hz 0.0 Hz 0.0 Hz ... 599.0 Hz

1 ms 0 ms 0 ms ... 60000 ms
1 ms 0 ms 0 ms ... 9999 ms
- [High level] POS
1 ms 0 ms 0 ms ... 60000 ms
1 ms 0 ms 0 ms ... 9999 ms
- [High level] POS
Refer to programming manual 0 0 ... 9999

Refer to programming manual 0 0 ... 9999

Refer to programming manual 50 1 ... 9999

1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535

# Internal
 1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
- [Not assigned] NO
- [Not assigned] NO
-
-
-
-
-
-
-
- [Normal duty] NORMAL
1s 5s 0 s ... 3600 s

- [No] NO
1s 60 s 10 s ... 3600 s

- [Not assigned] NO
1% 90 % 0 % ... 100 %

Refer to programming manual 0 ... 32767

0.001 kg/kWh 0.000 kg/kWh 0.000 kg/kWh ... 65.535 kg/kWh
Refer to programming manual 0 0 ... 65535
0.1 % 0.0 % ... 100.0 %
0.1 % 0.0 % ... 100.0 %
0.1 % 0.0 % ... 100.0 %
-
-
-
-
-
-
-
Refer to programming manual 0 ... 32767
Refer to programming manual -32767 ... 32767

1 0 0 ... 65535
1 kWh 0 kWh ... 4294967295 kWh
-
1 0 ... 65535
- [Freewheel stop] YES

0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

1h 0 h ... 500000 h
- [Pump characteristics disabled] NO
- [Inactive] NO
0.1 2.0 0.0 ... 2.0

Refer to programming manual 0 -32767 ... 32767

Refer to programming manual 0 -32767 ... 32767

- [No] NO
Refer to programming manual -32767 ... 32767
Refer to programming manual 0 -32767 ... 32767

# Internal
 - [Not configured] NO

Refer to programming manual 0 ... 2147483647

Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767

1 rpm 0 rpm ... 65535 rpm

0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

1 min 0 min 0 min ... 6 min

1 min 0 min 0 min ... 6 min

0.1 % -0.1 % -0.2 % ... 100.0 %

0.1 % 0.0 % -100.0 % ... 100.0 %

0.1 % 0.0 % -100.0 % ... 100.0 %

- [Ramp stop] RMP

1s 10 s 0 s ... 3600 s

Refer to programming manual 0 0 ... 32767

- [No] NO
-
-
-
-
-
-
-
1 Wh 0 Wh ... 999 Wh
1 kWh 0 kWh ... 999 kWh
1 MWh 0 MWh ... 999 MWh
1 GWh 0 GWh ... 999 GWh
1 TWh 0 TWh ... 999 TWh
- [Not assigned] NO
1 Wh -999 Wh ... 999 Wh
1 kWh -999 kWh ... 999 kWh
1 MWh -999 MWh ... 999 MWh
1 GWh -999 GWh ... 999 GWh
1 TWh -999 TWh ... 999 TWh
-

# Internal
 -
-
-
-
- Refer to programming manual
-
-
-
1 0 ... 5
-
-
-
-
-
- [Ramp stop] RMP
Refer to programming manual 0 0 ... 32767

Refer to programming manual 0 -32767 ... 32767

Refer to programming manual 0 -32767 ... 32767

- [NO] NO
1% 0 % ... 65535 %
Refer to programming manual -32767 ... 32767
Refer to programming manual 30 0 ... 3000

Refer to programming manual 30 0 ... 3000

- [Freewheel stop] YES

1 2 1 ... 99

1s 60 s 0 s ... 3600 s

- [No] NO
Refer to programming manual 30 0 ... 3000

Refer to programming manual 30 0 ... 3000

- [Not assigned] NO
0.1 Hz 0.0 Hz 0.0 Hz ... 599.0 Hz

1s 1s 0 s ... 300 s

1 10 1 ... 100

-
1s 0s 0 s ... 3600 s

Refer to programming manual 0 0 ... 32767

0.1 Hz Refer to programming manual 0.0 Hz ... 599.0 Hz

Refer to programming manual 0 0 ... 32767

1s 0s 0 s ... 3600 s

0.1 Hz 0.0 Hz 0.0 Hz ... 599.0 Hz

1s 1s 0 s ... 300 s

1s 10 s 0 s ... 3600 s

# Internal
 0.1 % 110.0 % 10.0 % ... 150.0 %

1h 24 h 0 h ... 9999 h

1s 0s 0 s ... 300 s

1 ms 5 ms 0 ms ... 200 ms
1 ms 5 ms 0 ms ... 200 ms
1 ms 5 ms 0 ms ... 200 ms
1 ms 5 ms 0 ms ... 200 ms
1 ms 5 ms 0 ms ... 200 ms
1 ms 5 ms 0 ms ... 200 ms
-
- [Yes] YES
1 0 0 ... 65535
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
- [Distribution logging disable] NO
- [Distribution logging disable] NO
- [Distribution logging disable] NO
- [Distribution logging disable] NO
- [Stop] STOP
1 Refer to programming manual 10 ... 65535
1 Refer to programming manual 10 ... 65535
1 Refer to programming manual 10 ... 65535
1 Refer to programming manual 10 ... 65535
- [1 second] 1S
- [Ignore] NO
- [Ignore] NO
- [Ignore] NO
- [Ignore] NO
1% 110 % 70 % ... 150 %

1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 Wh 0 Wh ... 999 Wh
1 kWh 0 kWh ... 999 kWh
1 MWh 0 MWh ... 999 MWh
1 GWh 0 GWh ... 999 GWh
1 TWh 0 TWh ... 999 TWh
Refer to programming manual 0 ... 65535

# Internal
Refer to programming manual 0 0 ... 32767

0.1 Hz 0.0 Hz 0.0 Hz ... 599.0 Hz

Refer to programming manual 0 0 ... 32767

0.1 Hz 0.0 Hz 0.0 Hz ... 599.0 Hz

1 0 ... 4294967295

1 Wh 0 Wh ... 999 Wh
1 kWh 0 kWh ... 999 kWh
1 MWh 0 MWh ... 999 MWh
1 GWh 0 GWh ... 999 GWh
1 TWh 0 TWh ... 999 TWh
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 kWh 0 kWh ... 4294967295 kWh

1 kWh 0 kWh ... 4294967295 kWh

1 Wh -999 Wh ... 999 Wh

1 kWh -999 kWh ... 999 kWh
1 MWh -999 MWh ... 999 MWh
1 GWh -999 GWh ... 999 GWh
1 TWh -999 TWh ... 999 TWh
- [No] NO
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 0 0 ... 65535
1 Wh 0 Wh ... 999 Wh
1 kWh 0 kWh ... 999 kWh
1 MWh 0 MWh ... 999 MWh
1 GWh 0 GWh ... 999 GWh
1 TWh 0 TWh ... 999 TWh
- [Ramp stop] RMP
1s 0s 0 s ... 3600 s

Refer to programming manual 0 0 ... 32767

Refer to programming manual 0 0 ... 32767

- [No] NO
- [Not assigned] NO

# Internal
Refer to programming manual -32767 ... 32767

0.1 % -3276.7 % ... 3276.7 %

0.1 % -3276.7 % ... 3276.7 %
0.1 % -3276.7 % ... 3276.7 %
0.1 % -3276.7 % ... 3276.7 %
0.1 % -3276.7 % ... 3276.7 %
0.1 % -3276.7 % ... 3276.7 %
0.1 % -3276.7 % ... 3276.7 %
- [No] NO
0.1 % 0.0 % 0.0 % ... 200.0 %
0.1 % 0.0 % 0.0 % ... 100.0 %
1 min 1 min 0 min ... 60 min
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
- [Pump characteristics disabled] NO
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
- [Ramp stop] RMP
- [Pump cycle monitoring disabled] NO
1 6 1 ... 99

1 min 60 min 0 min ... 3600 min

Refer to programming manual 0 0 ... 32767

Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
-
1 rpm Refer to programming manual 0 rpm ... 32767 rpm
0.1 % 0.0 % -100.0 % ... 100.0 %

0.1 % 0.0 % -100.0 % ... 100.0 %

- 15
- 15
- 15
- 15
0.01 Hz 0.00 Hz ... 42949672.95 Hz
0.01 Hz 0.00 Hz ... 42949672.95 Hz
- [Yes] YES
Refer to programming manual 0 0 ... 32767

0.1 Hz 25.0 Hz 0.0 Hz ... 599.0 Hz

1s 10 s 0 s ... 32767 s

# Internal
1 ms 0 ms 0 ms ... 1000 ms

1 ms 0 ms 0 ms ... 1000 ms

1% 30 % 0 % ... 100 %
- [No] NO
- [Ramp stop] RMP

1s 10 s 0 s ... 3600 s

- [No] NO

1% 3% 0 % ... 100 %

- [A - B - C phase rotation] ABC

1 0 -32767 ... 32767

1 0 -32767 ... 32767

1 0 -32767 ... 32767

1 0 -32767 ... 32767

# Internal
 0.01 kHz 30.00 kHz 0.00 kHz ... 30.00 kHz

0.01 kHz 30.00 kHz 0.00 kHz ... 30.00 kHz

0.01 Hz 0.00 Hz 0.00 Hz ... 30000.00 Hz

0.01 Hz 0.00 Hz 0.00 Hz ... 30000.00 Hz

1s 10 s 0 s ... 3600 s

- [Freewheel stop] YES

1s 10 s 0 s ... 3600 s

Refer to programming manual 0 0 ... 32767

- [No] NO
1s 0s 0 s ... 3600 s

- [Not assigned] NO
1% 110 % 100 % ... 500 %

-
1s 30 s 0 s ... 3600 s

- [Not configured] NO

# Internal
Refer to programming manual -32767 ... 32767

- [Not configured] NO

Refer to programming manual -32767 ... 32767

- [Not assigned] NO
1 ms 0 ms 0 ms ... 60000 ms
1 ms 0 ms 0 ms ... 9999 ms
- [High level] POS
- [Not assigned] NO
1 ms 0 ms 0 ms ... 60000 ms
1 ms 0 ms 0 ms ... 9999 ms
- [High level] POS
- [Not assigned] NO
1 ms 0 ms 0 ms ... 60000 ms
1 ms 0 ms 0 ms ... 9999 ms
- [High level] POS
- [Not assigned] NO
1 ms 0 ms 0 ms ... 60000 ms
1 ms 0 ms 0 ms ... 9999 ms
- [High level] POS
Refer to programming manual 0 0 ... 32767

0.1 Hz -3276.7 Hz ... 3276.7 Hz

0.1 Hz -3276.7 Hz ... 3276.7 Hz
0.1 Hz -3276.7 Hz ... 3276.7 Hz
0.1 Hz -3276.7 Hz ... 3276.7 Hz
0.1 Hz -3276.7 Hz ... 3276.7 Hz
0.1 Hz -3276.7 Hz ... 3276.7 Hz
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1 kg/m³ 1000 kg/m³ 100 kg/m³ ... 10000 kg/m³
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

1h 0 h ... 65535 h
1h 0 h ... 65535 h
1h 0 h ... 65535 h
1h 0 h ... 65535 h
1h 0 h ... 65535 h
1h 0 h ... 65535 h
1h 0 h ... 65535 h
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
Refer to programming manual -32767 ... 32767
1 Hz 0 Hz ... 65535 Hz
1 Hz 0 Hz ... 65535 Hz
1 Hz 0 Hz ... 65535 Hz
1 Hz 0 Hz ... 65535 Hz
1 Hz 0 Hz ... 65535 Hz
1 Hz 0 Hz ... 65535 Hz
1 Hz 0 Hz ... 65535 Hz
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

# Internal
 0.1 Hz 0.0 Hz 0.0 Hz ... 599.0 Hz

1s 0s 0 s ... 3600 s

0.1 Hz 1.0 Hz 1.0 Hz ... 1000.0 Hz

Refer to programming manual -32767 ... 32767

Refer to programming manual -32767 ... 32767

Refer to programming manual 0 0 ... 32767

1s 20 s 0 s ... 3600 s

- [No] NO
Refer to programming manual 0 0 ... 32767

- [Not assigned] NO
0.1 Hz 0.0 Hz 0.0 Hz ... 599.0 Hz

Refer to programming manual 0 ... 65535

-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1 0 ... 65535
0.1 s 60.0 s 0.0 s ... 200.0 s

0.1 % 150.0 % 0.0 % ... 150.0 %

0.1 Hz 2.0 Hz 0.0 Hz ... 500.0 Hz

- [No] NO
- Refer to programming manual
- Refer to programming manual
- Refer to programming manual
- Refer to programming manual
- [19200 bps] 19200
1% 0 % ... 255 %
1% 0 % ... 255 %
1% 0 % ... 255 %

# Internal
 1% 0 % ... 255 %
1% 0 % ... 255 %
1% 0 % ... 255 %
1% 0 % ... 255 %
- [8 bits even parity 1 stop bit] 8E1
Refer to programming manual Refer to programming manual -32768 ... 32767

- [Ramp stop] RMP

Refer to programming manual Refer to programming manual -32768 ... 32767

- [No] NO

Refer to programming manual -32767 ... 32767

Refer to programming manual Refer to programming manual -32768 ... 32767

- [Ramp stop] RMP

Refer to programming manual Refer to programming manual -32768 ... 32767

- [No] NO

Refer to programming manual -32767 ... 32767

Refer to programming manual Refer to programming manual -32768 ... 32767

- [Ramp stop] RMP

Refer to programming manual Refer to programming manual -32768 ... 32767

- [No] NO

Refer to programming manual -32767 ... 32767

Refer to programming manual Refer to programming manual -32768 ... 32767

# Internal
 - [Ramp stop] RMP

Refer to programming manual Refer to programming manual -32768 ... 32767

- [No] NO

Refer to programming manual -32767 ... 32767

1% 0 % ... 65535 %
1% 0 % ... 65535 %
1% 0 % ... 65535 %
1% 0 % ... 65535 %
1% 0 % ... 65535 %
1% 0 % ... 65535 %
1% 0 % ... 65535 %
1 °C 0 °C ... 255 °C
1 °C 0 °C ... 255 °C
1 °C 0 °C ... 255 °C
1 °C 0 °C ... 255 °C
1 °C 0 °C ... 255 °C
1 °C 0 °C ... 255 °C
1 °C 0 °C ... 255 °C
- [Not available] NA

0.1 s 10.0 s 0.1 s ... 30.0 s

0.1 V 10.0 V 0.0 V ... 10.0 V

# Internal
0.1 V 10.0 V 0.0 V ... 10.0 V

0.1 V 10.0 V 0.0 V ... 10.0 V

# Internal
0.1 V 0.0 V 0.0 V ... 10.0 V

0.1 V 0.0 V 0.0 V ... 10.0 V

# Internal
 0.1 V 0.0 V 0.0 V ... 10.0 V

0.1 V 0.0 V ... 6553.5 V

0.1 V 0.0 V ... 6553.5 V
0.1 V 0.0 V ... 6553.5 V
0.1 V 0.0 V ... 6553.5 V
0.1 V 0.0 V ... 6553.5 V
0.1 V 0.0 V ... 6553.5 V
0.1 V 0.0 V ... 6553.5 V
0.1 V 10.0 V 0.0 V ... 10.0 V

0.1 V 0.0 V 0.0 V ... 10.0 V

0.1 V 0.0 V ... 6553.5 V

0.01 V 0.20 V 0.10 V ... 100.00 V
Refer to programming manual 0 0 ... 32767

Refer to programming manual 0 0 ... 32767

- [Feedback] FBK
Refer to programming manual 0 0 ... 65535
1% -300 % ... 300 %
1 0 -32767 ... 32767

# Internal
 1 0 -32767 ... 32767

Refer to programming manual 0 ... 65535

-
-
-
-
-
-
-
-
-
-
-
-
-
-
- [Yes] YES
Refer to programming manual 0 0 ... 32767

Refer to programming manual 0 0 ... 32767

-
-
-
-
-
- [Circuit breaker not configured] NO
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

# Internal
 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Refer to programming manual 0 ... 65535
Refer to programming manual -32767 ... 32767
0.1 % -3276.7 % ... 3276.7 %
0.1 Hz -3276.7 Hz ... 3276.7 Hz
1 rpm 0 rpm ... 65535 rpm
1h 0 h ... 500000 h
1h 0 h ... 500000 h
1% 0 % ... 200 %
1s 0 s ... 4294967295 s
1s 0 s ... 4294967295 s
1 0 ... 4294967295
0.1 % -0.1 % -0.2 % ... 120.0 %

- [Standard] STD
Refer to programming manual -100000 ... 100000
-
-
- [NOT ACTIVE] IDLE
- [No] NO
1 0 ... 65535
-
-
-
-
-
-
-
-
Refer to programming manual -32767 ... 32767
Refer to programming manual 499 1 ... 65535

0.1 V -3276.7 V ... 3276.7 V

0.1 V -3276.7 V ... 3276.7 V
0.1 V -3276.7 V ... 3276.7 V
- [Generic pump Control] GPMP
- [Nominal motor power] NPR
0.1 ms 0.0 ms ... 100.0 ms
0.1 % 0.0 % ... 6553.5 %
- Refer to programming manual
1% 0% 0 % ... 300 %
1% 75 % 10 % ... 300 %
- [No] NO
0.1 Hz RCSP_AUTO -0.1 Hz ... 500.0 Hz
1% Refer to programming manual -100 % ... 100 %
0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz
- [Not configured] NO

# Internal
0.01 s 0.25 s 0.05 s ... 10.00 s

1% 300 % 10 % ... 300 %

1% 300 % 10 % ... 300 %

- [Modbus Word Order ON] HIGH

- [Modbus Word Order ON] HIGH
1 0 -32767 ... 32767

1 0 -32767 ... 32767

1 0 -10000 ... 10000

# Internal
- [Not configured] NO

1 0 -32767 ... 32767

1 0 -32767 ... 32767

1 0 -10000 ... 10000

# Internal
 - [Not configured] NO

Refer to programming manual -32767 ... 32767

Refer to programming manual -32767 ... 32767

0.1 % 0.0 % ... 100.0 %
Refer to programming manual 0 ... 32767
Refer to programming manual 0 ... 32767
1 1 0 ... 6

1 0 0 ... 6

- [Standard multipump speed control mode] TMC

- [Ramp stop] RMP

- [Ramp stop] RMP

- [Slave] SLAVE

0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz

0.1 % 3.0 % 0.0 % ... 100.0 %

1 0 0 ... 6
0.01 m 0.00 m 0.00 m ... 327.67 m

0.01 m 0.00 m 0.00 m ... 327.67 m

0.1 % 100.0 % 0.0 % ... 200.0 %

0.1 s 15.0 s 0.0 s ... 999.9 s

-
-
- [NOT ACTIVE] IDLE
- [No] NO
-
-
Refer to programming manual -32767 ... 32767

# Internal
Refer to programming manual -32767 ... 32767

Refer to programming manual Refer to programming manual -32767 ... 32767

Refer to programming manual 0 -32767 ... 32767

0.1 s 15.0 s 0.0 s ... 999.9 s

- [Default] DEFAULT
0.1 % 0.0 % 0.0 % ... 100.0 %

- [None] BFBK
0.1 s 1.0 s 0.0 s ... 999.9 s

- [Deactivated] NO

- [Not assigned] NO

- [Not assigned] NO

- [Not assigned] NO

1s Refer to programming manual -1 s ... 3000 s

-
- [Feedback] FBK
-
1 0 ... 65535
1 Hz -32767 Hz ... 32767 Hz
- [Freewheel stop] YES [CabinetCircuit C ErrorResp] (CFRC)
0.1 Hz 0.0 Hz -0.1 Hz ... 0.0 Hz
0.1 s 0.0 s 0.0 s ... 300.0 s
- [No] NO
- [Error] FLT
1 1 0 ... 4194303
- Refer to programming manual

1 ms 5 ms 0 ms ... 200 ms
0.01 s 0.15 s 0.05 s ... 60.00 s
- [Not assigned] NO
0.1 % 0.0 % 0.0 % ... 100.0 %

Refer to programming manual 0 -32767 ... 32767

0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

Refer to programming manual Refer to programming manual -32767 ... 32767

- [No] NO
- [No] NO
- [Drive unlocked] DLR1
- [No] NO
-

# Internal
 -

1 0 ... 65535
1 0 ... 4294967295
1s Refer to programming manual 1 s ... 999 s
1s Refer to programming manual -1 s ... 32400 s
0.1 s 1.0 s 0.0 s ... 999.9 s

-
- [Positive only] POS

- [Not assigned] NO
1 0 0 ... 65535
- [Freewheel stop] YES [CabinetCircuit A ErrorResp] (CFRA)
- [Freewheel stop] YES [CabinetCircuit B ErrorResp] (CFRB)
0.1 % 0.0 % ... 100.0 %

Refer to programming manual 0 0 ... 32767

1% 50 % 1 % ... 800 %
- [No] NO
- [Active parameters] ACT
0.1 % 2.0 % 1.0 % ... 100.0 %

1s 0 s ... 4294967295 s
-

- [Always active] ALL

1s 0 s ... 4294967295 s
- Refer to programming manual
-
Refer to programming manual 0 0 ... 32767

# Internal
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
Refer to programming manual 0 0 ... 32767
-
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz
1 ms 5 ms 0 ms ... 200 ms
Refer to programming manual -32767 ... 32767

1s 10 s 0 s ... 60 s
- [Not configured] NO

1 kg/m³ 1000 kg/m³ 100 kg/m³ ... 10000 kg/m³

-

0.1 Hz 35.0 Hz 0.0 Hz ... 500.0 Hz

1s 0s 0 s ... 3600 s

1 0 ... 4294967295
0.1 h 0.0 h ... 119304.6 h

1 10 2 ... 20
1 0 ... 4294967295
1 0 ... 65535
1 0 ... 4294967295
- [Not assigned] NO

- [Not assigned] NO

- [Not assigned] NO

- [Not assigned] NO

1 0 ... 4294967295
- [High level] POS
1 ms 0 ms 0 ms ... 60000 ms
Refer to programming manual 0 -32767 ... 32767
Refer to programming manual 0 -32767 ... 32767
Refer to programming manual 0 -32767 ... 32767
Refer to programming manual 0 -32767 ... 32767
- [Ramp stop] RMP
1 0 ... 4294967295
0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz

0.1 s 10.0 s 0.0 s ... 999.9 s

0.1 Hz -3276.7 Hz ... 3276.7 Hz

1 0 ... 4294967295
1 1 1 ... 127
1 ms 0 ms 0 ms ... 60000 ms
1s 0 s ... 4294967295 s
- [Pump runtime] RTIME

-
- [Instantaneous kW trend] CVE
-
1s 0s 0 s ... 300 s
- [High level] POS
1 ms 0 ms 0 ms ... 60000 ms
1 ms 0 ms 0 ms ... 9999 ms
1 0 ... 65535

# Internal
 1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 0 ... 255

- [Parameters list] NO
-
-
- [No] NO
0.1 % 0.0 % 0.0 % ... 100.0 %
1s 0s 0 s ... 300 s
1s 0s 0 s ... 300 s
1s 0s 0 s ... 300 s
1 0 ... 65535
-
- [Standard access] STD
- [Not active] NO

0.1 s 0.5 s 0.1 s ... 60.0 s

0.1 s 0.5 s 0.1 s ... 60.0 s
0.01 1.00 0.01 ... 2.00
0.1 % 70.0 % 0.0 % ... 200.0 %
1 ms 0 ms 0 ms ... 60000 ms
1 ms 0 ms 0 ms ... 9999 ms
-
-
-
-
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
-
1 0 ... 65535
- [High level] POS
1s 0s 0 s ... 60 s

- [No] NO
-

- [Not assigned] NO
- [Not assigned] NO
- [Not assigned] NO
- Refer to programming manual
- [+/- 8192] INEG
- [Not assigned] NO
- [Not assigned] NO
- [Not assigned] NO
0.1 s 0.5 s 0.0 s ... 100.0 s
-
-
0.1 % 0.0 % 0.0 % ... 100.0 %

1 0 ... 65535
1 10 0 ... 9999
- [No] NO
- [No] NO
- [Not assigned] NO

- [Not assigned] NO

# Internal
 - [High level] POS
1 ms 0 ms 0 ms ... 9999 ms
1 ms 0 ms 0 ms ... 60000 ms
1 min 5 min 0 min ... 10 min
- [Parameters list] NO
- [Warning] ALRM
1 0 ... 65535
1 0 ... 65535
-

Refer to programming manual 0 -32767 ... 32767

Refer to programming manual 0 -32767 ... 32767
0.01 s 5.00 s 0.00 s ... 99.99 s
Refer to programming manual 0 0 ... 32767
- [+/- 8192] INEG
0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

1V VLIM_DEFAULT 0 V ... 9999 V

- [Not assigned] NO
1s 0s 0 s ... 3600 s
0.01 s 1.00 s 0.00 s ... 60.00 s

- [High level] POS

1 ms 0 ms 0 ms ... 9999 ms
1s 0s 0 s ... 300 s
1s 0s 0 s ... 300 s
1s 0s 0 s ... 300 s
1 0 ... 4294967295
-
-
1 ms 5 ms 0 ms ... 200 ms
1 10 1 ... 100
- [DHCP] DHCP
0.1 s 0.5 s 0.1 s ... 60.0 s
0.1 s 60.0 s 0.0 s ... 360.0 s
0.1 s 0.5 s 0.1 s ... 60.0 s
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
- [Inactive] NO
- [Inactive] NO
-
- Refer to programming manual
- [Not assigned] NO
-
0.1 % 0.0 % 0.0 % ... 100.0 %

- [Not assigned] NO
- [No] NO
1 ms 5 ms 0 ms ... 200 ms

# Internal
 - [Not assigned] NO
- [Not assigned] NO
- [Not assigned] NO
- [Not assigned] NO
- [Freewheel stop] YES

- [No] NO
0.1 s 1.0 s 1.0 s ... 60.0 s
1 0 ... 65535
1 0 ... 65535
- [Not assigned] NO
- [Not assigned] NO
-

- [+/- 8192] INEG

0.1 s 3.0 s 0.0 s ... 99.9 s

-
1s 0 s ... 4294967295 s
1 ms 0 ms 0 ms ... 9999 ms
1 0 ... 65535
- [High level] POS
1 ms 0 ms 0 ms ... 9999 ms
1 ms 0 ms 0 ms ... 60000 ms
- [DHCP] DHCP
0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

- [Not assigned] NO
- [Freewheel stop] YES [MotorBearing A ErrorResp] (TFRC)
- [Freewheel stop] YES [MotorBearing B ErrorResp] (TFRD)
1 ms 5 ms 0 ms ... 200 ms
1 0 ... 65535
1 0 ... 4294967295
1 0 ... 65535

-
1 0 ... 4294967295
0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz

0.1 s 1.0 s 0.0 s ... 999.9 s

-
0.1 % 1.0 % 0.0 % ... 100.0 %
1 0 0 ... 6
Refer to programming manual 0 -32767 ... 32767

1 1 1 ... 32767

- [Not assigned] NO
- [Not assigned] NO
1s 0s 0 s ... 3600 s
1 0 ... 65535

1 0 ... 65535
1 0 ... 65535
1 0 ... 65535

# Internal
 1 0 ... 65535
1 ms 0 ms 0 ms ... 60000 ms
1 ms 0 ms 0 ms ... 9999 ms
- [High level] POS
- [Not assigned] NO

1 ms 5 ms 0 ms ... 200 ms
Refer to programming manual 0 -32767 ... 32767

Refer to programming manual Refer to programming manual -32767 ... 32767

- [No] NO
-
-
1s 0 s ... 4294967295 s
1 0 ... 4294967295
-
-
0.1 s 0.0 s 0.0 s ... 999.9 s

- [No] NO
- [Level switches] SW
0.1 % 0.0 % 0.0 % ... 500.0 %
- [Not assigned] NO
- [Not assigned] NO
- [Not assigned] NO
- [Not assigned] NO
0.1 h 0.0 h ... 429496729.5 h
0.01 s 10.00 s 0.00 s ... 99.99 s
0.01 s 5.00 s 0.00 s ... 99.99 s

Refer to programming manual 0 ... 65535

Refer to programming manual 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
- [Expert] OPTI
- [Yes] YES

# Internal
 - [Positive only] POS

0.1 % 20.0 % 0.0 % ... 100.0 %

- [Not assigned] NO
- [Not assigned] NO
-
0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz

- [Freewheel stop] YES

1 0 ... 4294967295
0.1 s 0.0 s 0.0 s ... 999.9 s

- [Digital values] DEC

1 ms 5 ms 0 ms ... 200 ms
- [Each pump stopped individually] INDIV
Refer to programming manual -32767 ... 32767
- [Not assigned] NO

1V -32767 V ... 32767 V

1s 0s 0 s ... 300 s

1s 0s 0 s ... 300 s

1s 0s 0 s ... 300 s

1s 0s 0 s ... 300 s

- [No] NO
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
1 0 ... 65535
- [Freewheel stop] YES [MonitorCircuit D ErrorResp] (IFRD)

- [No] NO

# Internal
 - [Positive only] POS

0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 % 0.0 % 0.0 % ... 100.0 %

0.1 h 0.0 h ... 429496729.5 h

1 ms 5 ms 0 ms ... 200 ms
-
- [Macro configuration] INI
- [Ramp stop] RMP
-
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz
Refer to programming manual Refer to programming manual -32767 ... 32767

Refer to programming manual 0 -32767 ... 32767

0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz

0.1 h 0.0 h ... 119304.6 h
0.1 s 3.0 s 0.0 s ... 999.9 s

- [Freewheel stop] YES [MotorWinding A ErrorResp] (TFRA)

- [Always active] ALL
- [Always active] ALL
- [Freewheel stop] YES [MotorWinding B ErrorResp] (TFRB)
- [Always active] ALL
- [Always active] ALL
- [Always active] ALL

- [Always active] ALL

- [Idle State] IDLE

# Internal
 - [Yes] YES
- [Always active] ALL

1s 30 s 0 s ... 120 s

Refer to programming manual -32767 ... 32767

- [Switches] TRAD
- [Not configured] NO

- [Positive only] POS

1 Hz 0 Hz 0 Hz ... 65535 Hz
1 0 ... 65535
-

1 0 ... 65535
- [Deactivated] NO
-
-
- [No] NO
- Refer to programming manual
- [Preset curve mode] PSET
- [Yes] YES
- [No] NO
1h 0 h ... 65535 h
-
1% 95 % 0 % ... 200 %
1 RCSP_AUTO -1 ... 32767
1 ms 5 ms 0 ms ... 200 ms
-

- [Always active] ALL

- [Always active] ALL
- [Always active] ALL
1s 0 s ... 4294967295 s
- [Mono-Pump] NO

- [No] NO
0.1 h 0.0 h 0.0 h ... 24.0 h

# Internal
 1° 0° 0 ° ... 360 °
- [No] NO
0.1 s 10.0 s 0.0 s ... 999.9 s

Refer to programming manual 0 0 ... 32767

0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz

0.1 s 0.0 s 0.0 s ... 99.9 s

0.01 s 10.00 s 0.00 s ... 99.99 s

0.1 s 3.0 s 1.0 s ... 100.0 s
- [Freewheel stop] YES [MonitorCircuit C ErrorResp] (IFRC)

- [Freewheel stop] YES

-
0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz
0.1 Hz Refer to programming manual 0.0 Hz ... 500.0 Hz
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz
0.1 Hz 0.0 Hz 0.0 Hz ... 500.0 Hz
- [Positive only] POS

- [No] NO
-
1 ms 5 ms 0 ms ... 200 ms
Refer to programming manual 0 0 ... 32767
0.01 s 0.10 s 0.00 s ... 5.00 s
0.1 % 0.0 % 0.0 % ... 100.0 %

- [Upload access allowed] ULR0

0.1 % 0.0 % 0.0 % ... 100.0 %

1% 0% 0 % ... 300 %

# Internal
 Display Menu

[Cmd Register] (CMD) [Communication map] (CMM)

[Counter Reset] (RPR) [Counter Management] (ELT)
[Maintenance] (CSMA)

[Ref Frequency] (LFR) [Drive parameters] (MPI)

[AIV1 Image input] (AIV1) [Drive parameters] (MPI)

[Multiplying coeff.] (MFR) [Drive parameters] (MPI)
[Settings] (SET)
[Status Register] (ETA) [Communication map] (CMM)
[Device State] (HMIS) [Pump Dashboard] (PMT)
[Fan Dashboard] (FAN)

[Config. active] (CNFS) [Drive parameters] (MPI)

[Tune selection] (STUN) [Simply start] (SIM)
[Motor tune] (MTU)
[Saliency mot. state] (SMOT) [Motor tune] (MTU)

[Motor Frequency] (RFR) [Drive parameters] (MPI)

[Motor torque] (OTR) [Motor parameters] (MMO)
[Motor Current] (LCR) [Pump Dashboard] (PMT)
[Fan Dashboard] (FAN)
[Motor parameters] (MMO)
[Motor voltage] (UOP) [Motor parameters] (MMO)
[Motor Power] (OPR) [Motor parameters] (MMO)

[Pre-Ramp Ref Freq] (FRH) [Pump Dashboard] (PMT)

[Fan Dashboard] (FAN)
[Drive parameters] (MPI)
[Communication map] (CMM)

[PID reference] (RPC) [Control] (CTR)

[Control] (FTR)
[Application Parameters] (APR)
[PID display] (PIC)
[PID feedback] (RPF) [Control] (CTR)
[Control] (FTR)
[Application Parameters] (APR)
[PID display] (PIC)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)

[PID Error] (RPE) [PID display] (PIC)

[PID Output] (RPO) [PID display] (PIC)
[Mains Voltage] (ULN) [Drive parameters] (MPI)
[Drive Therm State] (THD) [Drive parameters] (MPI)
[Motor Therm State] (THR) [Pump Dashboard] (PMT)
[Fan Dashboard] (FAN)
[Motor parameters] (MMO)

# Internal
 [Last Error] (LFT) [Diag. data] (DDT)

[Fieldbus Com Interrupt] (CNF) [DEVICENET DIAG] (DVN)

[PROFIBUS DIAG] (PRB)
[PROFINET DIAG] (PRN)
[POWERLINK DIAG] (PWL)
[InternCom Error1] (ILF1) [PROFIBUS DIAG] (PRB)
[PROFINET DIAG] (PRN)
[POWERLINK DIAG] (PWL)

[DC bus voltage] (ULP1) [None] (DP1)

[Motor current] (LCP1) [None] (DP1)
[Output frequency] (RFP1) [None] (DP1)
[Motor therm state] (THP1) [None] (DP1)
[Last Error 1 Status] (EP1) [None] (DP1)
[ETI state word] (IP1) [None] (DP1)
[Cmd word] (CMP1) [None] (DP1)
[Command Channel] (DCC1) [None] (DP1)
[Ref Freq Channel] (DRC1) [None] (DP1)

[Run Elapsed time] (RTP1) [None] (DP1)

[Motor Torque] (OTP1) [None] (DP1)
[Drive Thermal State] (TDP1) [None] (DP1)
[IGBT Junction Temp] (TJP1) [None] (DP1)
[Switching Frequency] (SFP1) [None] (DP1)

[DC bus voltage] (ULP2) [None] (DP2)

[Motor current] (LCP2) [None] (DP2)
[Output frequency] (RFP2) [None] (DP2)
[Motor therm state] (THP2) [None] (DP2)
[Last Error 2 Status] (EP2) [None] (DP2)
[ETI state word] (IP2) [None] (DP2)
[Cmd word] (CMP2) [None] (DP2)
[Command Channel] (DCC2) [None] (DP2)
[Ref Freq Channel] (DRC2) [None] (DP2)

[Run Elapsed time] (RTP2) [None] (DP2)

[Motor Torque] (OTP2) [None] (DP2)
[Drive Thermal State] (TDP2) [None] (DP2)

# Internal
 [IGBT Junction Temp] (TJP2) [None] (DP2)
[Switching Frequency] (SFP2) [None] (DP2)

[DC bus voltage] (ULP3) [None] (DP3)

[Motor current] (LCP3) [None] (DP3)
[Output frequency] (RFP3) [None] (DP3)
[Motor therm state] (THP3) [None] (DP3)
[Last Error 3 Status] (EP3) [None] (DP3)
[ETI state word] (IP3) [None] (DP3)
[Cmd word] (CMP3) [None] (DP3)
[Command Channel] (DCC3) [None] (DP3)
[Ref Freq Channel] (DRC3) [None] (DP3)

[Run Elapsed time] (RTP3) [None] (DP3)

[Motor Torque] (OTP3) [None] (DP3)
[Drive Thermal State] (TDP3) [None] (DP3)
[IGBT Junction Temp] (TJP3) [None] (DP3)
[Switching Frequency] (SFP3) [None] (DP3)

[DC bus voltage] (ULP4) [None] (DP4)

[Motor current] (LCP4) [None] (DP4)
[Output frequency] (RFP4) [None] (DP4)
[Motor therm state] (THP4) [None] (DP4)
[Last Error 4 Status] (EP4) [None] (DP4)
[ETI state word] (IP4) [None] (DP4)
[Cmd word] (CMP4) [None] (DP4)
[Command Channel] (DCC4) [None] (DP4)
[Ref Freq Channel] (DRC4) [None] (DP4)

[Run Elapsed time] (RTP4) [None] (DP4)

[Motor Torque] (OTP4) [None] (DP4)
[Drive Thermal State] (TDP4) [None] (DP4)
[IGBT Junction Temp] (TJP4) [None] (DP4)
[Switching Frequency] (SFP4) [None] (DP4)

[DC bus voltage] (ULP5) [None] (DP5)

[Motor current] (LCP5) [None] (DP5)
[Output frequency] (RFP5) [None] (DP5)
[Motor therm state] (THP5) [None] (DP5)
[ETA state word] (EP5) [None] (DP5)
[ETI state word] (IP5) [None] (DP5)
[Cmd word] (CMP5) [None] (DP5)
[Command Channel] (DCC5) [None] (DP5)
[Ref Freq Channel] (DRC5) [None] (DP5)

[Run Elapsed time] (RTP5) [None] (DP5)

[Motor Torque] (OTP5) [None] (DP5)
[Drive Thermal State] (TDP5) [None] (DP5)
[IGBT Junction Temp] (TJP5) [None] (DP5)
[Switching Frequency] (SFP5) [None] (DP5)

[DC bus voltage] (ULP6) [None] (DP6)

[Motor current] (LCP6) [None] (DP6)
[Output frequency] (RFP6) [None] (DP6)
[Motor therm state] (THP6) [None] (DP6)
[ETA state word] (EP6) [None] (DP6)
[ETI state word] (IP6) [None] (DP6)
[Cmd word] (CMP6) [None] (DP6)
[Command Channel] (DCC6) [None] (DP6)
[Ref Freq Channel] (DRC6) [None] (DP6)

# Internal
 [Run Elapsed time] (RTP6) [None] (DP6)
[Motor Torque] (OTP6) [None] (DP6)
[Drive Thermal State] (TDP6) [None] (DP6)
[IGBT Junction Temp] (TJP6) [None] (DP6)
[Switching Frequency] (SFP6) [None] (DP6)

[DC bus voltage] (ULP7) [None] (DP7)

[Motor current] (LCP7) [None] (DP7)
[Output frequency] (RFP7) [None] (DP7)
[Motor therm state] (THP7) [None] (DP7)
[ETA state word] (EP7) [None] (DP7)
[ETI state word] (IP7) [None] (DP7)
[Cmd word] (CMP7) [None] (DP7)
[Command Channel] (DCC7) [None] (DP7)
[Ref Freq Channel] (DRC7) [None] (DP7)

[Run Elapsed time] (RTP7) [None] (DP7)

[Motor Torque] (OTP7) [None] (DP7)
[Drive Thermal State] (TDP7) [None] (DP7)
[IGBT Junction Temp] (TJP7) [None] (DP7)
[Switching Frequency] (SFP7) [None] (DP7)

[DC bus voltage] (ULP8) [None] (DP8)

[Motor current] (LCP8) [None] (DP8)
[Output frequency] (RFP8) [None] (DP8)
[Motor therm state] (THP8) [None] (DP8)
[ETA state word] (EP8) [None] (DP8)
[ETI state word] (IP8) [None] (DP8)
[Cmd word] (CMP8) [None] (DP8)
[Command Channel] (DCC8) [None] (DP8)
[Ref Freq Channel] (DRC8) [None] (DP8)

[Run Elapsed time] (RTP8) [None] (DP8)

[Motor Torque] (OTP8) [None] (DP8)
[Drive Thermal State] (TDP8) [None] (DP8)
[IGBT Junction Temp] (TJP8) [None] (DP8)
[Switching Frequency] (SFP8) [None] (DP8)

[Com Scan Out1 val.] (NC1) [Com scan output map] (OSA)
[Com Scan Out2 val.] (NC2) [Com scan output map] (OSA)
[Com Scan Out3 val.] (NC3) [Com scan output map] (OSA)
[Com Scan Out4 val.] (NC4) [Com scan output map] (OSA)
[Com Scan Out5 val.] (NC5) [Com scan output map] (OSA)
[Com Scan Out6 val.] (NC6) [Com scan output map] (OSA)
[Com Scan Out7 val.] (NC7) [Com scan output map] (OSA)
[Com Scan Out8 val.] (NC8) [Com scan output map] (OSA)
[Com Scan In1 val.] (NM1) [Com. scanner input map] (ISA)
[Com Scan In2 val.] (NM2) [Com. scanner input map] (ISA)
[Com Scan In3 val.] (NM3) [Com. scanner input map] (ISA)
[Com Scan In4 val.] (NM4) [Com. scanner input map] (ISA)

# Internal
 [Com Scan In5 val.] (NM5) [Com. scanner input map] (ISA)
[Com Scan In6 val.] (NM6) [Com. scanner input map] (ISA)
[Com Scan In7 val.] (NM7) [Com. scanner input map] (ISA)
[Com Scan In8 val.] (NM8) [Com. scanner input map] (ISA)

[SwitchOnDisable Stp] (DOTD) [Stop configuration] (STT)

[2 Parameter sets] (CHA1) [Parameters switching] (MLP)

[3 Parameter sets] (CHA2) [Parameters switching] (MLP)
[Used param. set] (CFPS) [Drive parameters] (MPI)

[Parameter Set 1 Value 1] (S101) [Set 1] (PS1)

[Parameter Set 1 Value 2] (S102) [Set 1] (PS1)
[Parameter Set 1 Value 3] (S103) [Set 1] (PS1)
[Parameter Set 1 Value 4] (S104) [Set 1] (PS1)
[Parameter Set 1 Value 5] (S105) [Set 1] (PS1)
[Parameter Set 1 Value 6] (S106) [Set 1] (PS1)
[Parameter Set 1 Value 7] (S107) [Set 1] (PS1)
[Parameter Set 1 Value 8] (S108) [Set 1] (PS1)
[Parameter Set 1 Value 9] (S109) [Set 1] (PS1)
[Parameter Set 1 Value 10] (S110) [Set 1] (PS1)
[Parameter Set 1 Value 11] (S111) [Set 1] (PS1)
[Parameter Set 1 Value 12] (S112) [Set 1] (PS1)
[Parameter Set 1 Value 13] (S113) [Set 1] (PS1)
[Parameter Set 1 Value 14] (S114) [Set 1] (PS1)
[Parameter Set 1 Value 15] (S115) [Set 1] (PS1)
[Parameter Set 2 Value 1] (S201) [Set 2] (PS2)
[Parameter Set 2 Value 2] (S202) [Set 2] (PS2)
[Parameter Set 2 Value 3] (S203) [Set 2] (PS2)
[Parameter Set 2 Value 4] (S204) [Set 2] (PS2)
[Parameter Set 2 Value 5] (S205) [Set 2] (PS2)
[Parameter Set 2 Value 6] (S206) [Set 2] (PS2)
[Parameter Set 2 Value 7] (S207) [Set 2] (PS2)
[Parameter Set 2 Value 8] (S208) [Set 2] (PS2)
[Parameter Set 2 Value 9] (S209) [Set 2] (PS2)
[Parameter Set 2 Value 10] (S210) [Set 2] (PS2)
[Parameter Set 2 Value 11] (S211) [Set 2] (PS2)

# Internal
[Parameter Set 2 Value 12] (S212) [Set 2] (PS2)
[Parameter Set 2 Value 13] (S213) [Set 2] (PS2)
[Parameter Set 2 Value 14] (S214) [Set 2] (PS2)
[Parameter Set 2 Value 15] (S215) [Set 2] (PS2)
[Parameter Set 3 Value 1] (S301) [Set 3] (PS3)
[Parameter Set 3 Value 2] (S302) [Set 3] (PS3)
[Parameter Set 3 Value 3] (S303) [Set 3] (PS3)
[Parameter Set 3 Value 4] (S304) [Set 3] (PS3)
[Parameter Set 3 Value 5] (S305) [Set 3] (PS3)
[Parameter Set 3 Value 6] (S306) [Set 3] (PS3)
[Parameter Set 3 Value 7] (S307) [Set 3] (PS3)
[Parameter Set 3 Value 8] (S308) [Set 3] (PS3)
[Parameter Set 3 Value 9] (S309) [Set 3] (PS3)
[Parameter Set 3 Value 10] (S310) [Set 3] (PS3)
[Parameter Set 3 Value 11] (S311) [Set 3] (PS3)
[Parameter Set 3 Value 12] (S312) [Set 3] (PS3)
[Parameter Set 3 Value 13] (S313) [Set 3] (PS3)
[Parameter Set 3 Value 14] (S314) [Set 3] (PS3)
[Parameter Set 3 Value 15] (S315) [Set 3] (PS3)
[Low Speed] (LSP) [Simply start] (SIM)
[Pump start stop] (PST)
[Speed Limits] (SLM)
[Settings] (SET)
[High Speed] (HSP) [Simply start] (SIM)
[Pump start stop] (PST)
[Speed Limits] (SLM)
[Settings] (SET)
[Motor Th Current] (ITH) [Simply start] (SIM)
[Motor monitoring] (MOP)
[Settings] (SET)
[Motor thermal monit] (THT)
[Inertia Factor] (SPGU) [Motor control] (DRC)
[Settings] (SET)
[Speed prop. gain] (SPG) [Spd Loop Optimization] (MCL)
[Settings] (SET)
[Speed time integral] (SIT) [Spd Loop Optimization] (MCL)
[Settings] (SET)
[K speed loop filter] (SFC) [Spd Loop Optimization] (MCL)
[Settings] (SET)
[App. Inertia Coef.] (JACO) [Spd Loop Optimization] (MCL)
[Speed loop type] (SSL) [Spd Loop Optimization] (MCL)
[Estim. app. inertia] (JEST) [Spd Loop Optimization] (MCL)
[Application Inertia] (JAPL) [Spd Loop Optimization] (MCL)
[Inertia Mult. Coef.] (JMUL) [Spd Loop Optimization] (MCL)
[Feed forward] (FFP) [Spd Loop Optimization] (MCL)
[FeedFwd Bandwidth] (FFV) [Spd Loop Optimization] (MCL)
[Spd est. filter time] (FFH) [Spd Loop Optimization] (MCL)
[Current Filter Time] (CRTF) [data] (MTD)
[High Current Thd] (CTD) [Threshold reached] (THRE)
[Settings] (SET)
[High torque thd.] (TTH) [Threshold reached] (THRE)
[Settings] (SET)
[Low torque thd.] (TTL) [Threshold reached] (THRE)
[Settings] (SET)
[Motor Freq Thd] (FTD) [Threshold reached] (THRE)
[Settings] (SET)
[Freq. threshold 2] (F2D) [Threshold reached] (THRE)
[Settings] (SET)
[Skip Frequency 2] (JF2) [Jump frequency] (JUF)
[Jump frequency] (JUF)
[Settings] (SET)

# Internal
 [Skip Frequency] (JPF) [Jump frequency] (JUF)
[Jump frequency] (JUF)
[Settings] (SET)
[Skip Freq.Hysteresis] (JFH) [Jump frequency] (JUF)
[Jump frequency] (JUF)
[Settings] (SET)
[3rd Skip Frequency] (JF3) [Jump frequency] (JUF)
[Jump frequency] (JUF)
[Settings] (SET)
[Motor Standard] (BFR) [Simply start] (SIM)
[data] (MTD)
[Nominal Motor Power] (NPR) [Simply start] (SIM)
[data] (MTD)
[Motor 1 Cosinus Phi] (COS) [Simply start] (SIM)
[data] (MTD)
[Nom Motor Voltage] (UNS) [Simply start] (SIM)
[data] (MTD)
[Nom Motor Current] (NCR) [Simply start] (SIM)
[data] (MTD)
[Nominal Motor Freq] (FRS) [Simply start] (SIM)
[data] (MTD)
[Nominal Motor Speed] (NSP) [Simply start] (SIM)
[data] (MTD)
[Max Frequency] (TFR) [Simply start] (SIM)
[data] (MTD)
[Autotuning] (TUN) [Simply start] (SIM)
[Motor tune] (MTU)
[Automatic autotune] (AUT) [Motor tune] (MTU)
[Autotuning Status] (TUS) [Simply start] (SIM)
[Motor tune] (MTU)
[Motor control type] (CTT) [Motor parameters] (MPA)
[U1] (U1) [Motor control] (DRC)
[F1] (F1) [Motor control] (DRC)
[U2] (U2) [Motor control] (DRC)
[F2] (F2) [Motor control] (DRC)
[U3] (U3) [Motor control] (DRC)
[F3] (F3) [Motor control] (DRC)
[U4] (U4) [Motor control] (DRC)
[F4] (F4) [Motor control] (DRC)
[U5] (U5) [Motor control] (DRC)
[F5] (F5) [Motor control] (DRC)
[Sync Nominal I] (NCRS) [data] (MTD)
[Nom SyncMotor Speed] (NSPS) [data] (MTD)
[Pole pairs] (PPNS) [data] (MTD)
[Nom Motor torque] (TQS) [data] (MTD)
[Syn. EMF constant] (PHS) [data] (MTD)
[Autotune L d-axis] (LDS) [data] (MTD)
[Autotune L q-axis] (LQS) [data] (MTD)
[SyncMotor Stator R] (RSAS) [data] (MTD)
[IR compensation] (UFR) [Motor control] (DRC)
[Settings] (SET)
[Slip compensation] (SLP) [Motor control] (DRC)
[Settings] (SET)

[FreqLoopGain] (FLG) [Spd Loop Optimization] (MCL)

[FreqLoop Stab] (STA) [Spd Loop Optimization] (MCL)
[AsyncMotor R Stator] (RSA) [data] (MTD)
[Magnetizing Current] (IDA) [data] (MTD)
[AsyncMotor Lf Induct] (LFA) [data] (MTD)
[Rotor Time Const] (TRA) [data] (MTD)
[Sync Nominal Freq] (FRSS) [data] (MTD)

# Internal
[Switching frequency] (SFR) [Switching frequency] (SWF)
[Settings] (SET)
[Current Limitation] (CLI) [Motor monitoring] (MOP)
[Settings] (SET)
[Switch Freq Type] (SFT) [Switching frequency] (SWF)
[Noise Reduction] (NRD) [Switching frequency] (SWF)
[Boost activation] (BOA) [Motor control] (DRC)
[Motor surge limit.] (SVL) [Switching frequency] (SWF)
[Attenuation Time] (SOP) [Motor monitoring] (MOP)
[Switching frequency] (SWF)
[Fan mode] (FFM) [Settings] (SET)
[Fan management] (FAMA)
[2/3-Wire Control] (TCC) [Simply start] (SIM)
[Command and Reference] (CRP)
[2-wire type] (TCT) [Command and Reference] (CRP)
[Reverse Assign] (RRS) [Command and Reference] (CRP)
[Ref Freq template] (BSP) [Pump start stop] (PST)
[Speed Limits] (SLM)
[Input/Output] (IO)
[AI1 Type] (AI1T) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI1 configuration] (AI1)
[AI1 sensor config.] (ICA1)
[AI1 Sensor Config.] (OCA1)
[AI1 sensor config.] (IF1)
[AI1 Sensor config.] (PF1)
[AI1 Sensor Config.] (LCS1)
[AI1 Sensor Config.] (BIF1)
[AI1 Configuration] (LCA1)
[AI1 Configuration] (LIF1)
[AI1 Sensor config.] (SIF1)
[AI1 Sensor Config.] (SOA1)
[AI1 Sensor Config.] (WOA1)
[AI1 Sensor Config.] (PFA1)
[AI1 Installation Flow] (FIF1)
[AI1 Configuration] (PPA1)
[AI1 Sensor Config.] (LF1)
[AI1 Sensor config.] (NPF1)
[AI1 sensor config.] (IPA1)
[AI1 Sensor config.] (OOA1)
[AI1 sensor config.] (HIF1)

# Internal
 [AI1 Min. Value] (UIL1) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI1] (AI1C)
[AI1 configuration] (AI1)
[AI1 sensor config.] (ICA1)
[AI1 Sensor Config.] (OCA1)
[AI1 sensor config.] (IF1)
[AI1 Sensor config.] (PF1)
[AI1 Sensor Config.] (LCS1)
[AI1 Sensor Config.] (BIF1)
[AI1 Configuration] (LCA1)
[AI1 Configuration] (LIF1)
[AI1 Sensor config.] (SIF1)
[AI1 Sensor Config.] (SOA1)
[AI1 Sensor Config.] (WOA1)
[AI1 Sensor Config.] (PFA1)
[AI1 Installation Flow] (FIF1)
[AI1 Configuration] (PPA1)
[AI1 Sensor Config.] (LF1)
[AI1 Sensor config.] (NPF1)
[AI1 sensor config.] (IPA1)
[AI1 Sensor config.] (OOA1)
[AI1 sensor config.] (HIF1)

[AI1 Max Value] (UIH1) [PID Feedback] (FDB)

[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI1] (AI1C)
[AI1 configuration] (AI1)
[AI1 sensor config.] (ICA1)
[AI1 Sensor Config.] (OCA1)
[AI1 sensor config.] (IF1)
[AI1 Sensor config.] (PF1)
[AI1 Sensor Config.] (LCS1)
[AI1 Sensor Config.] (BIF1)
[AI1 Configuration] (LCA1)
[AI1 Configuration] (LIF1)
[AI1 Sensor config.] (SIF1)
[AI1 Sensor Config.] (SOA1)
[AI1 Sensor Config.] (WOA1)
[AI1 Sensor Config.] (PFA1)
[AI1 Installation Flow] (FIF1)
[AI1 Configuration] (PPA1)
[AI1 Sensor Config.] (LF1)
[AI1 Sensor config.] (NPF1)
[AI1 sensor config.] (IPA1)
[AI1 Sensor config.] (OOA1)
[AI1 sensor config.] (HIF1)

[AI1 filter] (AI1F) [AI1] (AI1C)

[AI1 configuration] (AI1)
[AI1 X Interm. Point] (AI1E) [AI1 configuration] (AI1)
[AI1 Interm. point Y] (AI1S) [AI1 configuration] (AI1)

# Internal
 [AI2 Type] (AI2T) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI2 configuration] (AI2)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI2 sensor config.] (ICA2)
[AI2 Sensor Config.] (OCA2)
[AI2 sensor config.] (IF2)
[AI2 Sensor config.] (PF2)
[AI2 Sensor Config.] (LCS2)
[AI2 Sensor Config.] (BIF2)
[AI2 Configuration] (LCA2)
[AI2 Configuration] (LIF2)
[AI2 Sensor config.] (SIF2)
[AI2 Sensor Config.] (SOA2)
[AI2 Sensor Config.] (WOA2)
[AI2 Sensor Config.] (PFA2)
[AI2 Installation Flow] (FIF2)
[AI2 Configuration] (PPA2)
[AI2 Sensor Config.] (LF2)
[AI2 Sensor config.] (NPF2)
[AI2 sensor config.] (IPA2)
[AI2 Sensor config.] (OOA2)
[AI2 sensor config.] (HIF2)

[AI2 Min. Value] (UIL2) [PID Feedback] (FDB)

[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI2] (AI2C)
[AI2 configuration] (AI2)
[AI2 sensor config.] (ICA2)
[AI2 Sensor Config.] (OCA2)
[AI2 sensor config.] (IF2)
[AI2 Sensor config.] (PF2)
[AI2 Sensor Config.] (LCS2)
[AI2 Sensor Config.] (BIF2)
[AI2 Configuration] (LCA2)
[AI2 Configuration] (LIF2)
[AI2 Sensor config.] (SIF2)
[AI2 Sensor Config.] (SOA2)
[AI2 Sensor Config.] (WOA2)
[AI2 Sensor Config.] (PFA2)
[AI2 Installation Flow] (FIF2)
[AI2 Configuration] (PPA2)
[AI2 Sensor Config.] (LF2)
[AI2 Sensor config.] (NPF2)
[AI2 sensor config.] (IPA2)
[AI2 Sensor config.] (OOA2)
[AI2 sensor config.] (HIF2)

# Internal
 [AI2 Max value] (UIH2) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI2] (AI2C)
[AI2 configuration] (AI2)
[AI2 sensor config.] (ICA2)
[AI2 Sensor Config.] (OCA2)
[AI2 sensor config.] (IF2)
[AI2 Sensor config.] (PF2)
[AI2 Sensor Config.] (LCS2)
[AI2 Sensor Config.] (BIF2)
[AI2 Configuration] (LCA2)
[AI2 Configuration] (LIF2)
[AI2 Sensor config.] (SIF2)
[AI2 Sensor Config.] (SOA2)
[AI2 Sensor Config.] (WOA2)
[AI2 Sensor Config.] (PFA2)
[AI2 Installation Flow] (FIF2)
[AI2 Configuration] (PPA2)
[AI2 Sensor Config.] (LF2)
[AI2 Sensor config.] (NPF2)
[AI2 sensor config.] (IPA2)
[AI2 Sensor config.] (OOA2)
[AI2 sensor config.] (HIF2)

[AI2 filter] (AI2F) [AI2] (AI2C)

[AI2 configuration] (AI2)
[AI2 X Interm. Point] (AI2E) [AI2 configuration] (AI2)
[AI2 Interm. point Y] (AI2S) [AI2 configuration] (AI2)
[AI3 Type] (AI3T) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI3 configuration] (AI3)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI3 sensor config.] (ICA3)
[AI3 Sensor Config.] (OCA3)
[AI3 sensor config.] (IF3)
[AI3 Sensor config.] (PF3)
[AI3 Sensor Config.] (LCS3)
[AI3 Sensor Config.] (BIF3)
[AI3 Configuration] (LCA3)
[AI3 Configuration] (LIF3)
[AI3 Sensor config.] (SIF3)
[AI3 Sensor Config.] (SOA3)
[AI3 Sensor Config.] (WOA3)
[AI3 Sensor Config.] (PFA3)
[AI3 Installation Flow] (FIF3)
[AI3 Configuration] (PPA3)
[AI3 Sensor Config.] (LF3)
[AI3 Sensor config.] (NPF3)
[AI3 sensor config.] (IPA3)
[AI3 Sensor config.] (OOA3)
[AI3 sensor config.] (HIF3)

# Internal
 [AI3 Min. Value] (CRL3) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI3] (AI3C)
[AI3 configuration] (AI3)
[AI3 sensor config.] (ICA3)
[AI3 Sensor Config.] (OCA3)
[AI3 sensor config.] (IF3)
[AI3 Sensor config.] (PF3)
[AI3 Sensor Config.] (LCS3)
[AI3 Sensor Config.] (BIF3)
[AI3 Configuration] (LCA3)
[AI3 Configuration] (LIF3)
[AI3 Sensor config.] (SIF3)
[AI3 Sensor Config.] (SOA3)
[AI3 Sensor Config.] (WOA3)
[AI3 Sensor Config.] (PFA3)
[AI3 Installation Flow] (FIF3)
[AI3 Configuration] (PPA3)
[AI3 Sensor Config.] (LF3)
[AI3 Sensor config.] (NPF3)
[AI3 sensor config.] (IPA3)
[AI3 Sensor config.] (OOA3)
[AI3 sensor config.] (HIF3)

[AI3 Max Value] (CRH3) [PID Feedback] (FDB)

[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI3] (AI3C)
[AI3 configuration] (AI3)
[AI3 sensor config.] (ICA3)
[AI3 Sensor Config.] (OCA3)
[AI3 sensor config.] (IF3)
[AI3 Sensor config.] (PF3)
[AI3 Sensor Config.] (LCS3)
[AI3 Sensor Config.] (BIF3)
[AI3 Configuration] (LCA3)
[AI3 Configuration] (LIF3)
[AI3 Sensor config.] (SIF3)
[AI3 Sensor Config.] (SOA3)
[AI3 Sensor Config.] (WOA3)
[AI3 Sensor Config.] (PFA3)
[AI3 Installation Flow] (FIF3)
[AI3 Configuration] (PPA3)
[AI3 Sensor Config.] (LF3)
[AI3 Sensor config.] (NPF3)
[AI3 sensor config.] (IPA3)
[AI3 Sensor config.] (OOA3)
[AI3 sensor config.] (HIF3)

[AI3 filter] (AI3F) [AI3] (AI3C)

[AI3 configuration] (AI3)
[AI3 X Interm. point] (AI3E) [AI3 configuration] (AI3)
[AI3 Y Interm. point] (AI3S) [AI3 configuration] (AI3)
[AQ1 assignment] (AO1) [AQ1] (AO1C)
[AQ1 configuration] (AO1)
[AQ1 Type] (AO1T) [AQ1 configuration] (AO1)
[AQ1 min output] (AOL1) [AQ1] (AO1C)
[AQ1 configuration] (AO1)
[AQ1 max output] (AOH1) [AQ1] (AO1C)
[AQ1 configuration] (AO1)
[AQ1 min Output] (UOL1) [AQ1] (AO1C)
[AQ1 configuration] (AO1)
[AQ1 max Output] (UOH1) [AQ1] (AO1C)
[AQ1 configuration] (AO1)

# Internal
 [Scaling AQ1 min] (ASL1) [AQ1] (AO1C)
[AQ1 configuration] (AO1)
[Scaling AQ1 max] (ASH1) [AQ1] (AO1C)
[AQ1 configuration] (AO1)
[AQ1 Filter] (AO1F) [AQ1] (AO1C)
[AQ1 configuration] (AO1)
[Ref Freq 1 Config] (FR1) [Command and Reference] (CRP)
[PID Reference] (RF)
[PID Reference] (RF)
[PID Reference] (RF)
[Reverse Disable] (RIN) [Command and Reference] (CRP)
[Reverse disable] (REIN)
[Stop Key Enable] (PST) [Command and Reference] (CRP)
[Control Mode] (CHCF) [Command and Reference] (CRP)
[Command Switching] (CCS) [Command and Reference] (CRP)
[Cmd channel 1] (CD1) [Command and Reference] (CRP)
[Cmd channel 2] (CD2) [Command and Reference] (CRP)
[Freq Switch Assign] (RFC) [Command and Reference] (CRP)
[Ref Freq 2 Config] (FR2) [Command and Reference] (CRP)
[Copy Ch1-Ch2] (COP) [Command and Reference] (CRP)
[F1 key assignment] (FN1) [Functions key mgnt] (FKG)
[F2 key assignment] (FN2) [Functions key mgnt] (FKG)
[F3 key assignment] (FN3) [Functions key mgnt] (FKG)
[F4 key assignment] (FN4) [Functions key mgnt] (FKG)
[HMI L/R cmd] (BMP) [Command and Reference] (CRP)
[Ref 1B switching] (RCB) [Command and Reference] (CRP)
[Ref.1B channel] (FR1B) [Command and Reference] (CRP)
[Summing Input 2] (SA2) [Ref. operations] (OAI)
[Summing Input 3] (SA3) [Ref. operations] (OAI)
[Subtract Ref Freq 2] (DA2) [Ref. operations] (OAI)
[Subtract Ref Freq 3] (DA3) [Ref. operations] (OAI)
[Ref Freq 2 Multiply] (MA2) [Ref. operations] (OAI)
[Ref Freq 3 Multiply] (MA3) [Ref. operations] (OAI)
[Ramp Type] (RPT) [Ramp] (RAMP)
[Ramp increment] (INR) [Ramp] (RAMP)
[Settings] (SET)
[Acceleration] (ACC) [Simply start] (SIM)
[Pump start stop] (PST)
[Ramp] (RAMP)
[Settings] (SET)
[Deceleration] (DEC) [Simply start] (SIM)
[Pump start stop] (PST)
[Ramp] (RAMP)
[Settings] (SET)
[Begin Acc round] (TA1) [Ramp] (RAMP)
[Settings] (SET)
[End Acc round] (TA2) [Ramp] (RAMP)
[Settings] (SET)
[Begin Dec round] (TA3) [Ramp] (RAMP)
[Settings] (SET)
[End Dec round] (TA4) [Ramp] (RAMP)
[Settings] (SET)
[Ramp 2 Thd] (FRT) [Ramp switching] (RPT)
[Ramp Switch Assign] (RPS) [Ramp switching] (RPT)
[Acceleration 2] (AC2) [Ramp switching] (RPT)
[Settings] (SET)
[Deceleration 2] (DE2) [Ramp switching] (RPT)
[Settings] (SET)
[Dec.Ramp Adapt] (BRA) [Ramp] (RAMP)
[Type of stop] (STT) [Stop configuration] (STT)
[Freewheel stop Thd] (FFT) [Stop configuration] (STT)
[Settings] (SET)

# Internal
 [Freewheel Stop] (NST) [Stop configuration] (STT)
[Fast Stop Assign] (FST) [Stop configuration] (STT)
[Ramp Divider] (DCF) [Stop configuration] (STT)
[Settings] (SET)
[DC Injection Assign] (DCI) [Stop configuration] (STT)
[DC Inj Level 1] (IDC) [Stop configuration] (STT)
[Settings] (SET)
[DC Inj Time 1] (TDI) [Stop configuration] (STT)
[Settings] (SET)
[DC Inj Level 2] (IDC2) [Stop configuration] (STT)
[Settings] (SET)
[DC Inj Time 2] (TDC) [Stop configuration] (STT)
[Settings] (SET)
[Auto DC Injection] (ADC) [Auto DC injection] (ADC)
[Auto DC inj Level 1] (SDC1) [Auto DC injection] (ADC)
[Settings] (SET)
[Auto DC Inj Time 1] (TDC1) [Auto DC injection] (ADC)
[Settings] (SET)
[Auto DC inj Level 2] (SDC2) [Auto DC injection] (ADC)
[Settings] (SET)
[Auto DC Inj Time 2] (TDC2) [Auto DC injection] (ADC)
[Settings] (SET)
[2 Preset Freq] (PS2) [Preset speeds] (PSS)
[4 Preset Freq] (PS4) [Preset speeds] (PSS)
[8 Preset Freq] (PS8) [Preset speeds] (PSS)
[16 Preset Freq] (PS16) [Preset speeds] (PSS)
[Preset speed 2] (SP2) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 3] (SP3) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 4] (SP4) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 5] (SP5) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 6] (SP6) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 7] (SP7) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 8] (SP8) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 9] (SP9) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 10] (SP10) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 11] (SP11) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 12] (SP12) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 13] (SP13) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 14] (SP14) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 15] (SP15) [Preset speeds] (PSS)
[Settings] (SET)
[Preset speed 16] (SP16) [Preset speeds] (PSS)
[Settings] (SET)
[+ Speed Assign] (USP) [+/- speed] (UPD)
[- Speed Assign] (DSP) [+/- speed] (UPD)
[Ref Frequency Save] (STR) [+/- speed] (UPD)
[Angle setting type] (AST) [data] (MTD)
[Motor tune] (MTU)
[PSI Align Curr Max] (MCR) [data] (MTD)
[Motor tune] (MTU)

# Internal
[PID feedback Assign] (PIF) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[Min PID feedback] (PIF1) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[Max PID feedback] (PIF2) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[Min PID Process] (PIP1) [PID Reference] (RF)
[PID Reference] (RF)
[PID Reference] (RF)
[Max PID Process] (PIP2) [PID Reference] (RF)
[PID Reference] (RF)
[PID Reference] (RF)
[Intern PID Ref] (PII) [PID Reference] (RF)
[PID Reference] (RF)
[PID Reference] (RF)
[Internal PID ref] (RPI) [PID display] (PIC)
[PID Reference] (RF)
[PID Reference] (RF)
[PID Reference] (RF)
[PID Prop.Gain] (RPG) [Settings] (ST)
[Settings] (ST)
[Settings] (ST)
[Settings] (SET)
[PID Intgl.Gain] (RIG) [Settings] (ST)
[Settings] (ST)
[Settings] (ST)
[Settings] (SET)
[PID derivative gain] (RDG) [Settings] (ST)
[Settings] (ST)
[Settings] (ST)
[Settings] (SET)
[PID ramp] (PRP) [Settings] (ST)
[Settings] (ST)
[Settings] (ST)
[Settings] (SET)
[PID Inversion] (PIC) [Settings] (ST)
[Settings] (ST)
[Settings] (ST)
[PID Min Output] (POL) [Settings] (ST)
[Settings] (ST)
[Settings] (ST)
[Settings] (SET)
[PID Max Output] (POH) [Settings] (ST)
[Settings] (ST)
[Settings] (ST)
[Settings] (SET)
[Min fbk Warning] (PAL) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[Settings] (SET)
[Max fbk Warning] (PAH) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[Settings] (SET)
[PID error Warning] (PER) [Settings] (ST)
[Settings] (ST)
[Settings] (ST)
[Settings] (SET)
[PID Integral OFF] (PIS) [Settings] (ST)
[Settings] (ST)
[Settings] (ST)

# Internal
[Predictive Speed Ref] (FPI) [PID Reference] (RF)
[PID Reference] (RF)
[PID Reference] (RF)
[Speed input %] (PSR) [PID Reference] (RF)
[PID Reference] (RF)
[PID Reference] (RF)
[Settings] (SET)
[Auto/Manual assign.] (PAU) [PID Reference] (RF)
[PID Reference] (RF)
[PID Reference] (RF)
[Manual PID reference] (PIM) [PID Reference] (RF)
[PID Reference] (RF)
[PID Reference] (RF)
[Low Speed Timeout] (TLS) [Settings] (SET)
[Stop after speed timeout] (PRSP)
[2 PID Preset Assign] (PR2) [PID preset references] (PRI)
[PID preset references] (PRI)
[PID preset references] (PRI)
[4 PID Preset Assign] (PR4) [PID preset references] (PRI)
[PID preset references] (PRI)
[PID preset references] (PRI)
[Ref PID Preset 2] (RP2) [Settings] (SET)
[PID preset references] (PRI)
[PID preset references] (PRI)
[PID preset references] (PRI)
[Ref PID Preset 3] (RP3) [Settings] (SET)
[PID preset references] (PRI)
[PID preset references] (PRI)
[PID preset references] (PRI)
[Ref PID Preset 4] (RP4) [PID preset references] (PRI)
[PID preset references] (PRI)
[PID preset references] (PRI)
[Settings] (SET)
[Torque limit activ.] (TLA) [Torque limitation] (TOL)
[Mains Contactor] (LLC) [Mains contactor command] (LLC)
[Device Lock] (LES) [Mains contactor command] (LLC)
[Circuit breaker] (CCBK)
[Mains V. time out] (LCT) [Mains contactor command] (LLC)
[Circuit breaker] (CCBK)
[Autotuning Assign] (TUL) [Motor tune] (MTU)
[Fault Reset Assign] (RSF) [Fault reset] (RST)
[Product restart] (RP) [Fault reset] (RST)
[Prod Restart Assign] (RPA) [Fault reset] (RST)
[Auto Fault Reset] (ATR) [Fan] (CSFA)
[Auto Fault Reset] (ATR)
[Fault Reset Time] (TAR) [Auto Fault Reset] (ATR)
[Catch On Fly] (FLR) [Fan] (CSFA)
[Catch on the fly] (FLR)
[Motor Thermal Mode] (THT) [Motor monitoring] (MOP)
[Motor thermal monit] (THT)
[Motor Therm Thd] (TTD) [Motor monitoring] (MOP)
[Threshold reached] (THRE)
[Settings] (SET)
[MotorTemp ErrorResp] (OLL) [Motor monitoring] (MOP)
[OutPhaseLoss Assign] (OPL) [Output phase loss] (OPL)
[OutPhaseLoss Delay] (ODT) [Output phase loss] (OPL)
[InPhaseLoss Assign] (IPL) [Input phase loss] (IPL)
[DriveTemp ErrorResp] (OHL) [Drive overload monit] (OBR)
[Dev Thermal Warning] (THA) [Drive overload monit] (OBR)
[Ext Error assign] (ETF) [External error] (ETF)
[Ext Error Resp] (EPL) [External error] (ETF)
[Undervoltage Resp] (USB) [Undervoltage handling] (USB)
[Mains voltage] (URES) [Undervoltage handling] (USB)

# Internal
 [Undervoltage level] (USL) [Undervoltage handling] (USB)
[UnderVolt timeout] (UST) [Undervoltage handling] (USB)
[Stop Type PLoss] (STP) [Undervoltage handling] (USB)
[UnderV. restart tm] (TSM) [Undervoltage handling] (USB)
[Prevention level] (UPL) [Undervoltage handling] (USB)
[Max stop time] (STM) [Undervoltage handling] (USB)
[DC bus maintain time] (TBS) [Undervoltage handling] (USB)
[Output Short Circuit Test] (STRT) [Motor monitoring] (MOP)
[Catch On Fly Mode] (COFM) [Catch on the fly] (FLR)
[AI3 4-20mA loss] (LFL3) [4-20 mA loss] (LFL)
[Disable Error Detect] (INH) [Fan] (CSFA)
[Error detect disabling] (INH)
[Forced Run] (INHS) [Error detect disabling] (INH)
[Forced Run Ref] (INHR) [Error detect disabling] (INH)
[Fieldbus Interrupt Resp] (CLL) [Communication Module] (COMO)
[CANopen Error Resp] (COL) [Communication Module] (COMO)
[Modbus Error Resp] (SLL) [Fieldbus monitoring] (CLL)
[Tuning Error Resp] (TNL) [Motor tune] (MTU)
[Pairing password] (PPI) [My preferences] (MYP)
[FallbackSpeed] (LFF) [4-20 mA loss] (LFL)
[External error] (ETF)
[Communication Module] (COMO)
[Fieldbus monitoring] (CLL)
[Fallback speed] (LFF)
[Embedded modbus TCP] (EMTC)
[High flow monitoring] (HFP)
[Inlet pressure monitoring] (IPP)
[Outlet pressure monitoring] (OPP)
[Pumpcycle monitoring] (CSP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Pump low flow Monit] (PLF)
[Vortex Control] (VCTL)

[Scan. IN1 address] (OMA1) [DeviceNet] (DNC)

[Scan. IN2 address] (OMA2) [DeviceNet] (DNC)
[Scan. IN3 address] (OMA3) [DeviceNet] (DNC)
[Scan. IN4 address] (OMA4) [DeviceNet] (DNC)

[Scan.Out1 address] (OCA1) [DeviceNet] (DNC)

[Scan.Out2 address] (OCA2) [DeviceNet] (DNC)
[Scan.Out3 address] (OCA3) [DeviceNet] (DNC)
[Scan.Out4 address] (OCA4) [DeviceNet] (DNC)

# Internal
 [Modbus Address] (ADD) [Modbus Fieldbus] (MD1)
[Modbus add Com.C.] (AMOC) [Modbus Fieldbus] (MD1)
[Modbus Baud Rate] (TBR) [Modbus Fieldbus] (MD1)
[Modbus Format] (TFO) [Modbus Fieldbus] (MD1)
[ModbusTimeout] (TTO) [Modbus Fieldbus] (MD1)
[CANopen Address] (ADCO) [CANopen] (CNO)
[CANopen Baudrate] (BDCO) [CANopen] (CNO)
[CANopen Error] (ERCO) [CANopen map] (CNM)
[CANopen] (CNO)
[Forced Local Assign] (FLO) [Command and Reference] (CRP)
[Forced Local Chan] (FLOC) [Command and Reference] (CRP)
[Time-out forc. local] (FLOT) [Command and Reference] (CRP)
[Address] (ADRC) [DeviceNet] (DNC)
[BACnet MS/TP] (BACM)
[Profibus] (PBC)
[Powerlink] (EPL)
[PPO profile used] (PRFL) [PROFIBUS DIAG] (PRB)
[PROFINET DIAG] (PRN)
[DP Master Active] (DPMA) [PROFIBUS DIAG] (PRB)
[PROFINET DIAG] (PRN)
[Conf. Assembly] (CIOA) [DeviceNet] (DNC)
[Baudrate] (BDR) [DeviceNet] (DNC)
[BACnet MS/TP] (BACM)
[Data rate used] (BDRU) [DEVICENET DIAG] (DVN)
[PROFIBUS DIAG] (PRB)
[BACnet MS/TP] (BACM)

[Actual rate] (ARD) [Ethernet Module Diag] (MTE)

[DI1 Delay] (L1D) [DI1 Configuration] (DI1)
[R1 Assignment] (R1) [R1 configuration] (R1)
[R2 Assignment] (R2) [R2 configuration] (R2)
[DI2 Delay] (L2D) [DI2 Configuration] (DI2)
[R1 Delay time] (R1D) [R1 configuration] (R1)
[R2 Delay time] (R2D) [R2 configuration] (R2)
[DI3 Delay] (L3D) [DI3 Configuration] (DI3)
[R1 Active at] (R1S) [R1 configuration] (R1)
[R2 Active at] (R2S) [R2 configuration] (R2)
[DI4 Delay] (L4D) [DI4 Configuration] (DI4)
[R1 Holding time] (R1H) [R1 configuration] (R1)
[R2 Holding time] (R2H) [R2 configuration] (R2)
[DI5 Delay] (L5D) [DI5 Configuration] (DI5)
[DI6 Delay] (L6D) [DI6 Configuration] (DI6)

[Unld Detect Delay] (ULT) [Process underload] (ULD)

[Hysteresis Freq] (SRB) [Settings] (SET)
[Process underload] (ULD)
[Process overload] (OLD)
[Underload ErrorResp] (UDL) [Process underload] (ULD)
[Unld. FreqThr. Det.] (RMUD) [Settings] (SET)
[Process underload] (ULD)
[Unld.Thr.0.Speed] (LUL) [Settings] (SET)
[Process underload] (ULD)

# Internal
[Unld.Thr.Nom.Speed] (LUN) [Settings] (SET)
[Process underload] (ULD)
[Ovld Detection Delay] (TOL) [Process overload] (OLD)
[Overload ErrorResp] (ODL) [Process overload] (OLD)

[PID acceleration time] (ACCP) [Settings] (ST)

[Settings] (ST)
[Settings] (ST)
[Settings] (SET)
[Booster Control] (BSC)
[Start Accel Ramp] (ACCS) [Pump start stop] (PST)
[Settings] (SET)

[AI1 Lowest Process] (AI1J) [AI1 sensor config.] (ICA1)

[AI1 Sensor Config.] (OCA1)
[AI1 sensor config.] (IF1)
[AI1 Sensor config.] (PF1)
[AI1 Sensor Config.] (LCS1)
[AI1 Sensor Config.] (BIF1)
[AI1 Configuration] (LCA1)
[AI1 Configuration] (LIF1)
[AI1 Sensor config.] (SIF1)
[AI1 Sensor Config.] (SOA1)
[AI1 Sensor Config.] (WOA1)
[AI1 Sensor Config.] (PFA1)
[AI1 Installation Flow] (FIF1)
[AI1 Configuration] (PPA1)
[AI1 Sensor Config.] (LF1)
[AI1 Sensor config.] (NPF1)
[AI1 sensor config.] (IPA1)
[AI1 Sensor config.] (OOA1)
[AI1 sensor config.] (HIF1)

[AI1 Highest Process] (AI1K) [AI1 sensor config.] (ICA1)

[AI1 Sensor Config.] (OCA1)
[AI1 sensor config.] (IF1)
[AI1 Sensor config.] (PF1)
[AI1 Sensor Config.] (LCS1)
[AI1 Sensor Config.] (BIF1)
[AI1 Configuration] (LCA1)
[AI1 Configuration] (LIF1)
[AI1 Sensor config.] (SIF1)
[AI1 Sensor Config.] (SOA1)
[AI1 Sensor Config.] (WOA1)
[AI1 Sensor Config.] (PFA1)
[AI1 Installation Flow] (FIF1)
[AI1 Configuration] (PPA1)
[AI1 Sensor Config.] (LF1)
[AI1 Sensor config.] (NPF1)
[AI1 sensor config.] (IPA1)
[AI1 Sensor config.] (OOA1)
[AI1 sensor config.] (HIF1)

# Internal
[AI2 Lowest Process] (AI2J) [AI2 sensor config.] (ICA2)
[AI2 Sensor Config.] (OCA2)
[AI2 sensor config.] (IF2)
[AI2 Sensor config.] (PF2)
[AI2 Sensor Config.] (LCS2)
[AI2 Sensor Config.] (BIF2)
[AI2 Configuration] (LCA2)
[AI2 Configuration] (LIF2)
[AI2 Sensor config.] (SIF2)
[AI2 Sensor Config.] (SOA2)
[AI2 Sensor Config.] (WOA2)
[AI2 Sensor Config.] (PFA2)
[AI2 Installation Flow] (FIF2)
[AI2 Configuration] (PPA2)
[AI2 Sensor Config.] (LF2)
[AI2 Sensor config.] (NPF2)
[AI2 sensor config.] (IPA2)
[AI2 Sensor config.] (OOA2)
[AI2 sensor config.] (HIF2)

[AI2 Highest Process] (AI2K) [AI2 sensor config.] (ICA2)

[AI2 Sensor Config.] (OCA2)
[AI2 sensor config.] (IF2)
[AI2 Sensor config.] (PF2)
[AI2 Sensor Config.] (LCS2)
[AI2 Sensor Config.] (BIF2)
[AI2 Configuration] (LCA2)
[AI2 Configuration] (LIF2)
[AI2 Sensor config.] (SIF2)
[AI2 Sensor Config.] (SOA2)
[AI2 Sensor Config.] (WOA2)
[AI2 Sensor Config.] (PFA2)
[AI2 Installation Flow] (FIF2)
[AI2 Configuration] (PPA2)
[AI2 Sensor Config.] (LF2)
[AI2 Sensor config.] (NPF2)
[AI2 sensor config.] (IPA2)
[AI2 Sensor config.] (OOA2)
[AI2 sensor config.] (HIF2)

[AI3 Lowest Process] (AI3J) [AI3 sensor config.] (ICA3)

[AI3 Sensor Config.] (OCA3)
[AI3 sensor config.] (IF3)
[AI3 Sensor config.] (PF3)
[AI3 Sensor Config.] (LCS3)
[AI3 Sensor Config.] (BIF3)
[AI3 Configuration] (LCA3)
[AI3 Configuration] (LIF3)
[AI3 Sensor config.] (SIF3)
[AI3 Sensor Config.] (SOA3)
[AI3 Sensor Config.] (WOA3)
[AI3 Sensor Config.] (PFA3)
[AI3 Installation Flow] (FIF3)
[AI3 Configuration] (PPA3)
[AI3 Sensor Config.] (LF3)
[AI3 Sensor config.] (NPF3)
[AI3 sensor config.] (IPA3)
[AI3 Sensor config.] (OOA3)
[AI3 sensor config.] (HIF3)

# Internal
[AI3 Highest Process] (AI3K) [AI3 sensor config.] (ICA3)
[AI3 Sensor Config.] (OCA3)
[AI3 sensor config.] (IF3)
[AI3 Sensor config.] (PF3)
[AI3 Sensor Config.] (LCS3)
[AI3 Sensor Config.] (BIF3)
[AI3 Configuration] (LCA3)
[AI3 Configuration] (LIF3)
[AI3 Sensor config.] (SIF3)
[AI3 Sensor Config.] (SOA3)
[AI3 Sensor Config.] (WOA3)
[AI3 Sensor Config.] (PFA3)
[AI3 Installation Flow] (FIF3)
[AI3 Configuration] (PPA3)
[AI3 Sensor Config.] (LF3)
[AI3 Sensor config.] (NPF3)
[AI3 sensor config.] (IPA3)
[AI3 Sensor config.] (OOA3)
[AI3 sensor config.] (HIF3)

[AI4 X Interm. point] (AI4E) [AI4 configuration] (AI4)

[AI4 filter] (AI4F) [AI4] (AI4C)
[AI4 configuration] (AI4)

[AI4 Lowest Process] (AI4J) [AI4 sensor config.] (ICA4)

[AI4 Sensor Config.] (OCA4)
[AI4 sensor config.] (IF4)
[AI4 Sensor config.] (PF4)
[AI4 Sensor Config.] (LCS4)
[AI4 Sensor Config.] (BIF4)
[AI4 Configuration] (LCA4)
[AI4 Configuration] (LIF4)
[AI4 Sensor config.] (SIF4)
[AI4 Sensor Config.] (SOA4)
[AI4 Sensor Config.] (WOA4)
[AI4 Sensor Config.] (PFA4)
[AI4 Installation Flow] (FIF4)
[AI4 Configuration] (PPA4)
[AI4 Sensor Config.] (LF4)
[AI4 Sensor config.] (NPF4)
[AI4 sensor config.] (IPA4)
[AI4 Sensor config.] (OOA4)
[AI4 sensor config.] (HIF4)

[AI4 Highest Process] (AI4K) [AI4 sensor config.] (ICA4)

[AI4 Sensor Config.] (OCA4)
[AI4 sensor config.] (IF4)
[AI4 Sensor config.] (PF4)
[AI4 Sensor Config.] (LCS4)
[AI4 Sensor Config.] (BIF4)
[AI4 Configuration] (LCA4)
[AI4 Configuration] (LIF4)
[AI4 Sensor config.] (SIF4)
[AI4 Sensor Config.] (SOA4)
[AI4 Sensor Config.] (WOA4)
[AI4 Sensor Config.] (PFA4)
[AI4 Installation Flow] (FIF4)
[AI4 Configuration] (PPA4)
[AI4 Sensor Config.] (LF4)
[AI4 Sensor config.] (NPF4)
[AI4 sensor config.] (IPA4)
[AI4 Sensor config.] (OOA4)
[AI4 sensor config.] (HIF4)

[AI4 Y Interm.point] (AI4S) [AI4 configuration] (AI4)

# Internal
 [AI4 Type] (AI4T) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI4 configuration] (AI4)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI4 sensor config.] (ICA4)
[AI4 Sensor Config.] (OCA4)
[AI4 sensor config.] (IF4)
[AI4 Sensor config.] (PF4)
[AI4 Sensor Config.] (LCS4)
[AI4 Sensor Config.] (BIF4)
[AI4 Configuration] (LCA4)
[AI4 Configuration] (LIF4)
[AI4 Sensor config.] (SIF4)
[AI4 Sensor Config.] (SOA4)
[AI4 Sensor Config.] (WOA4)
[AI4 Sensor Config.] (PFA4)
[AI4 Installation Flow] (FIF4)
[AI4 Configuration] (PPA4)
[AI4 Sensor Config.] (LF4)
[AI4 Sensor config.] (NPF4)
[AI4 sensor config.] (IPA4)
[AI4 Sensor config.] (OOA4)
[AI4 sensor config.] (HIF4)

[AI5 X Interm. point] (AI5E) [AI5 configuration] (AI5)

[AI5 filter] (AI5F) [AI5] (AI5C)
[AI5 configuration] (AI5)

[AI5 Lowest Process] (AI5J) [AI5 sensor config.] (ICA5)

[AI5 Sensor Config.] (OCA5)
[AI5 sensor config.] (IF5)
[AI5 Sensor config.] (PF5)
[AI5 Sensor Config.] (LCS5)
[AI5 Sensor Config.] (BIF5)
[AI5 Configuration] (LCA5)
[AI5 Configuration] (LIF5)
[AI5 Sensor config.] (SIF5)
[AI5 Sensor Config.] (SOA5)
[AI5 Sensor Config.] (WOA5)
[AI5 Sensor Config.] (PFA5)
[AI5 Installation Flow] (FIF5)
[AI5 Configuration] (PPA5)
[AI5 Sensor Config.] (LF5)
[AI5 Sensor config.] (NPF5)
[AI5 sensor config.] (IPA5)
[AI5 Sensor config.] (OOA5)
[AI5 sensor config.] (HIF5)

# Internal
[AI5 Highest Process] (AI5K) [AI5 sensor config.] (ICA5)
[AI5 Sensor Config.] (OCA5)
[AI5 sensor config.] (IF5)
[AI5 Sensor config.] (PF5)
[AI5 Sensor Config.] (LCS5)
[AI5 Sensor Config.] (BIF5)
[AI5 Configuration] (LCA5)
[AI5 Configuration] (LIF5)
[AI5 Sensor config.] (SIF5)
[AI5 Sensor Config.] (SOA5)
[AI5 Sensor Config.] (WOA5)
[AI5 Sensor Config.] (PFA5)
[AI5 Installation Flow] (FIF5)
[AI5 Configuration] (PPA5)
[AI5 Sensor Config.] (LF5)
[AI5 Sensor config.] (NPF5)
[AI5 sensor config.] (IPA5)
[AI5 Sensor config.] (OOA5)
[AI5 sensor config.] (HIF5)

[AI5 Y Interm.point] (AI5S) [AI5 configuration] (AI5)

[AI5 Type] (AI5T) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI5 configuration] (AI5)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI5 sensor config.] (ICA5)
[AI5 Sensor Config.] (OCA5)
[AI5 sensor config.] (IF5)
[AI5 Sensor config.] (PF5)
[AI5 Sensor Config.] (LCS5)
[AI5 Sensor Config.] (BIF5)
[AI5 Configuration] (LCA5)
[AI5 Configuration] (LIF5)
[AI5 Sensor config.] (SIF5)
[AI5 Sensor Config.] (SOA5)
[AI5 Sensor Config.] (WOA5)
[AI5 Sensor Config.] (PFA5)
[AI5 Installation Flow] (FIF5)
[AI5 Configuration] (PPA5)
[AI5 Sensor Config.] (LF5)
[AI5 Sensor config.] (NPF5)
[AI5 sensor config.] (IPA5)
[AI5 Sensor config.] (OOA5)
[AI5 sensor config.] (HIF5)

# Internal
[AIV1 Channel Assign] (AIC1) [Virtual AI1] (AV1)
[AIV1 Sensor Config.] (ICV1)
[AIV1 Sensor Config.] (OCV1)
[AIV1 Sensor Config.] (IFV1)
[AIV1 Configuration] (PFV1)
[AIV1 Sensor Config.] (LSV1)
[AIV1 Sensor Config.] (BIV1)
[AIV1 Configuration] (LCV1)
[AIV1 Configuration] (LIV1)
[AIV1 Sensor Config.] (SIV1)
[AIV1 Sensor Config.] (SOV1)
[AIV1 Sensor Config.] (WOV1)
[AIV1 Sensor Config.] (PF1V)
[AIV1 Sensor Config.] (FIV1)
[AIV1 Configuration] (PPV1)
[AIV1 Sensor Config.] (LFV1)
[AIV1 Sensor Config.] (NPV1)
[AIV1 Sensor Config.] (IPV1)
[AIV1 Sensor Config.] (OOV1)
[AIV1 Sensor Config.] (HIV1)

[AQ2 assignment] (AO2) [AQ2] (AO2C)

[AQ2 configuration] (AO2)

[AQ2 Filter] (AO2F) [AQ2] (AO2C)

[AQ2 configuration] (AO2)

[AQ2 Type] (AO2T) [AQ2 configuration] (AO2)

[AQ2 max output] (AOH2) [AQ2] (AO2C)
[AQ2 configuration] (AO2)
[AQ2 min output] (AOL2) [AQ2] (AO2C)
[AQ2 configuration] (AO2)
[Application state] (APPS) [Control] (CTR)
[Application Parameters] (APR)
[Scaling AQ2 max] (ASH2) [AQ2] (AO2C)
[AQ2 configuration] (AO2)
[Scaling AQ2 min] (ASL2) [AQ2] (AO2C)
[AQ2 configuration] (AO2)
[Sleep Condition] (ASLC) [Advanced sleep check] (ADS)
[Settings] (SET)
[Sleep Check Delay] (ASLD) [Advanced sleep check] (ADS)
[Settings] (SET)
[Sleep Mode] (ASLM) [Advanced sleep check] (ADS)
[Check Sleep Ref spd] (ASLR) [Advanced sleep check] (ADS)
[Settings] (SET)
[Warning Clearing] (CAR) [Customer events] (CUEV)
[Money Saved] (CASH) [Energy Saving] (ESA)
[Time counter 1] (CC1) [Customer event 1] (CE1)
[Time counter 2] (CC2) [Customer event 2] (CE2)
[Time counter 3] (CC3) [Customer event 3] (CE3)
[Time counter 4] (CC4) [Customer event 4] (CE4)
[Time counter 5] (CC5) [Customer event 5] (CE5)
[Config Warning 1] (CCA1) [Customer event 1] (CE1)
[Config Warning 2] (CCA2) [Customer event 2] (CE2)
[Config Warning 3] (CCA3) [Customer event 3] (CE3)
[Config Warning 4] (CCA4) [Customer event 4] (CE4)
[Config Warning 5] (CCA5) [Customer event 5] (CE5)
[Counter limit 1] (CCL1) [Customer event 1] (CE1)
[Counter limit 2] (CCL2) [Customer event 2] (CE2)
[Counter limit 3] (CCL3) [Customer event 3] (CE3)
[Counter limit 4] (CCL4) [Customer event 4] (CE4)
[Counter limit 5] (CCL5) [Customer event 5] (CE5)

# Internal
[Counter Source 1] (CCS1) [Customer event 1] (CE1)
[Counter Source 2] (CCS2) [Customer event 2] (CE2)
[Counter Source 3] (CCS3) [Customer event 3] (CE3)
[Counter Source 4] (CCS4) [Customer event 4] (CE4)
[Counter Source 5] (CCS5) [Customer event 5] (CE5)

[Flow Lim Thd Active] (CHT) [Settings] (SET)

[Flow limitation] (FLM)
[Cmd word] (CMP9) [None] (DP9)
[Cmd word] (CMPA) [None] (DPA)
[Cmd word] (CMPB) [None] (DPB)
[CMD word] (CMPC) [None] (DPC)
[CMD word] (CMPD) [None] (DPD)
[CMD word] (CMPE) [None] (DPE)
[CMD word] (CMPF) [None] (DPF)
[Co2 Saved] (CO2S) [Energy Saving] (ESA)
[AI1 Max Value] (CRH1) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI1] (AI1C)
[AI1 configuration] (AI1)
[AI1 sensor config.] (ICA1)
[AI1 Sensor Config.] (OCA1)
[AI1 sensor config.] (IF1)
[AI1 Sensor config.] (PF1)
[AI1 Sensor Config.] (LCS1)
[AI1 Sensor Config.] (BIF1)
[AI1 Configuration] (LCA1)
[AI1 Configuration] (LIF1)
[AI1 Sensor config.] (SIF1)
[AI1 Sensor Config.] (SOA1)
[AI1 Sensor Config.] (WOA1)
[AI1 Sensor Config.] (PFA1)
[AI1 Installation Flow] (FIF1)
[AI1 Configuration] (PPA1)
[AI1 Sensor Config.] (LF1)
[AI1 Sensor config.] (NPF1)
[AI1 sensor config.] (IPA1)
[AI1 Sensor config.] (OOA1)
[AI1 sensor config.] (HIF1)

# Internal
[AI2 Max Value] (CRH2) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI2] (AI2C)
[AI2 configuration] (AI2)
[AI2 sensor config.] (ICA2)
[AI2 Sensor Config.] (OCA2)
[AI2 sensor config.] (IF2)
[AI2 Sensor config.] (PF2)
[AI2 Sensor Config.] (LCS2)
[AI2 Sensor Config.] (BIF2)
[AI2 Configuration] (LCA2)
[AI2 Configuration] (LIF2)
[AI2 Sensor config.] (SIF2)
[AI2 Sensor Config.] (SOA2)
[AI2 Sensor Config.] (WOA2)
[AI2 Sensor Config.] (PFA2)
[AI2 Installation Flow] (FIF2)
[AI2 Configuration] (PPA2)
[AI2 Sensor Config.] (LF2)
[AI2 Sensor config.] (NPF2)
[AI2 sensor config.] (IPA2)
[AI2 Sensor config.] (OOA2)
[AI2 sensor config.] (HIF2)

[AI4 Max Value] (CRH4) [PID Feedback] (FDB)

[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI4] (AI4C)
[AI4 configuration] (AI4)
[AI4 sensor config.] (ICA4)
[AI4 Sensor Config.] (OCA4)
[AI4 sensor config.] (IF4)
[AI4 Sensor config.] (PF4)
[AI4 Sensor Config.] (LCS4)
[AI4 Sensor Config.] (BIF4)
[AI4 Configuration] (LCA4)
[AI4 Configuration] (LIF4)
[AI4 Sensor config.] (SIF4)
[AI4 Sensor Config.] (SOA4)
[AI4 Sensor Config.] (WOA4)
[AI4 Sensor Config.] (PFA4)
[AI4 Installation Flow] (FIF4)
[AI4 Configuration] (PPA4)
[AI4 Sensor Config.] (LF4)
[AI4 Sensor config.] (NPF4)
[AI4 sensor config.] (IPA4)
[AI4 Sensor config.] (OOA4)
[AI4 sensor config.] (HIF4)

# Internal
[AI5 Max Value] (CRH5) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI5] (AI5C)
[AI5 configuration] (AI5)
[AI5 sensor config.] (ICA5)
[AI5 Sensor Config.] (OCA5)
[AI5 sensor config.] (IF5)
[AI5 Sensor config.] (PF5)
[AI5 Sensor Config.] (LCS5)
[AI5 Sensor Config.] (BIF5)
[AI5 Configuration] (LCA5)
[AI5 Configuration] (LIF5)
[AI5 Sensor config.] (SIF5)
[AI5 Sensor Config.] (SOA5)
[AI5 Sensor Config.] (WOA5)
[AI5 Sensor Config.] (PFA5)
[AI5 Installation Flow] (FIF5)
[AI5 Configuration] (PPA5)
[AI5 Sensor Config.] (LF5)
[AI5 Sensor config.] (NPF5)
[AI5 sensor config.] (IPA5)
[AI5 Sensor config.] (OOA5)
[AI5 sensor config.] (HIF5)

[AI1 Min. Value] (CRL1) [PID Feedback] (FDB)

[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI1] (AI1C)
[AI1 configuration] (AI1)
[AI1 sensor config.] (ICA1)
[AI1 Sensor Config.] (OCA1)
[AI1 sensor config.] (IF1)
[AI1 Sensor config.] (PF1)
[AI1 Sensor Config.] (LCS1)
[AI1 Sensor Config.] (BIF1)
[AI1 Configuration] (LCA1)
[AI1 Configuration] (LIF1)
[AI1 Sensor config.] (SIF1)
[AI1 Sensor Config.] (SOA1)
[AI1 Sensor Config.] (WOA1)
[AI1 Sensor Config.] (PFA1)
[AI1 Installation Flow] (FIF1)
[AI1 Configuration] (PPA1)
[AI1 Sensor Config.] (LF1)
[AI1 Sensor config.] (NPF1)
[AI1 sensor config.] (IPA1)
[AI1 Sensor config.] (OOA1)
[AI1 sensor config.] (HIF1)

# Internal
[AI2 Min. Value] (CRL2) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI2] (AI2C)
[AI2 configuration] (AI2)
[AI2 sensor config.] (ICA2)
[AI2 Sensor Config.] (OCA2)
[AI2 sensor config.] (IF2)
[AI2 Sensor config.] (PF2)
[AI2 Sensor Config.] (LCS2)
[AI2 Sensor Config.] (BIF2)
[AI2 Configuration] (LCA2)
[AI2 Configuration] (LIF2)
[AI2 Sensor config.] (SIF2)
[AI2 Sensor Config.] (SOA2)
[AI2 Sensor Config.] (WOA2)
[AI2 Sensor Config.] (PFA2)
[AI2 Installation Flow] (FIF2)
[AI2 Configuration] (PPA2)
[AI2 Sensor Config.] (LF2)
[AI2 Sensor config.] (NPF2)
[AI2 sensor config.] (IPA2)
[AI2 Sensor config.] (OOA2)
[AI2 sensor config.] (HIF2)

[AI4 Min. Value] (CRL4) [PID Feedback] (FDB)

[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI4] (AI4C)
[AI4 configuration] (AI4)
[AI4 sensor config.] (ICA4)
[AI4 Sensor Config.] (OCA4)
[AI4 sensor config.] (IF4)
[AI4 Sensor config.] (PF4)
[AI4 Sensor Config.] (LCS4)
[AI4 Sensor Config.] (BIF4)
[AI4 Configuration] (LCA4)
[AI4 Configuration] (LIF4)
[AI4 Sensor config.] (SIF4)
[AI4 Sensor Config.] (SOA4)
[AI4 Sensor Config.] (WOA4)
[AI4 Sensor Config.] (PFA4)
[AI4 Installation Flow] (FIF4)
[AI4 Configuration] (PPA4)
[AI4 Sensor Config.] (LF4)
[AI4 Sensor config.] (NPF4)
[AI4 sensor config.] (IPA4)
[AI4 Sensor config.] (OOA4)
[AI4 sensor config.] (HIF4)

# Internal
 [AI5 Min. Value] (CRL5) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI5] (AI5C)
[AI5 configuration] (AI5)
[AI5 sensor config.] (ICA5)
[AI5 Sensor Config.] (OCA5)
[AI5 sensor config.] (IF5)
[AI5 Sensor config.] (PF5)
[AI5 Sensor Config.] (LCS5)
[AI5 Sensor Config.] (BIF5)
[AI5 Configuration] (LCA5)
[AI5 Configuration] (LIF5)
[AI5 Sensor config.] (SIF5)
[AI5 Sensor Config.] (SOA5)
[AI5 Sensor Config.] (WOA5)
[AI5 Sensor Config.] (PFA5)
[AI5 Installation Flow] (FIF5)
[AI5 Configuration] (PPA5)
[AI5 Sensor Config.] (LF5)
[AI5 Sensor config.] (NPF5)
[AI5 sensor config.] (IPA5)
[AI5 Sensor config.] (OOA5)
[AI5 sensor config.] (HIF5)

[Low I Threshold] (CTDL) [Threshold reached] (THRE)

[Settings] (SET)
[Check Valve Spd 2] (CVHS) [Pump start stop] (PST)
[Settings] (SET)
[Check Valve Spd 1] (CVLS) [Pump start stop] (PST)
[Settings] (SET)
[DQ11 actv delay] (D11D) [DQ11 Configuration] (DO11)
[DQ11 hold delay] (D11H) [DQ11 Configuration] (DO11)
[DQ11 status] (D11S) [DQ11 Configuration] (DO11)
[DQ12 actv delay] (D12D) [DQ12 Configuration] (DO12)
[DQ12 hold delay] (D12H) [DQ12 Configuration] (DO12)
[DQ12 status] (D12S) [DQ12 Configuration] (DO12)
[Final Dec. Ramp] (DECS) [Pump start stop] (PST)
[Settings] (SET)
[Dec. Check Valve] (DECV) [Pump start stop] (PST)
[Settings] (SET)
[Flow. Limit Dec.] (DFL) [Settings] (SET)
[Flow limitation] (FLM)

# Internal
 [DQ11 assignment] (DO11) [DQ11 Configuration] (DO11)
[DQ12 assignment] (DO12) [DQ12 Configuration] (DO12)

[Dual rating] (DRT) [Motor parameters] (MPA)

[DryRun Error Delay] (DRYD) [Dry run Monit] (DYR)
[Settings] (SET)
[DryRun Mode] (DRYM) [Dry run Monit] (DYR)
[DryRun Restart Delay] (DRYR) [Dry run Monit] (DYR)
[Settings] (SET)
[Switch Select] (DRYW) [Dry run Monit] (DYR)
[Dry Run Factor] (DRYX) [Dry run Monit] (DYR)
[Settings] (SET)
[Energy Cons. Ind.] (ECI) [Variable Speed Pump] (MPP)
[CO2 ratio] (ECO2) [Energy Saving] (ESA)
[kWh Cost] (ECST) [Energy Saving] (ESA)
[Efficiency] (EFY) [Variable Speed Pump] (MPP)
[Lowest Eff.] (EFYJ) [Variable Speed Pump] (MPP)
[Highest Eff.] (EFYK) [Variable Speed Pump] (MPP)
[ETA state word] (EP9) [None] (DP9)
[ETA state word] (EPA) [None] (DPA)
[ETA state word] (EPB) [None] (DPB)
[ETA state word] (EPC) [None] (DPC)
[ETA state word] (EPD) [None] (DPD)
[ETA state word] (EPE) [None] (DPE)
[ETA state word] (EPF) [None] (DPF)
[Energy Perf. Ind] (EPI) [Variable Speed Pump] (MPP)
[Acv Elc Out Pwr Estm] (EPRW) [kWh Counters] (KWC)
[Elec Ener Output Counter] (ELO)
[Variable Speed Pump] (MPP)
[Ethernet Error Code] (ERR) [PROFINET DIAG] (PRN)
[Energy Saved] (ESAV) [Energy Saving] (ESA)

[Eth Error Response] (ETHL) [Embedded modbus TCP] (EMTC)

[Communication Module] (COMO)
[2 Freq. Threshold] (F2DL) [Threshold reached] (THRE)
[Settings] (SET)
[Fan Operation Time] (FPBT) [Counter Management] (ELT)
[Flow Estimation Mode] (FEM) [Flow estimation] (SFE)
[Mode Selection] (FLCM) [Friction loss comp] (FLC)
[Alpha] (FLDA) [Friction loss comp] (FLC)
[Settings] (SET)
[Static Compensation] (FLH0) [Friction loss comp] (FLC)
[Settings] (SET)
[Comp. at Point 1] (FLH1) [Friction loss comp] (FLC)
[Settings] (SET)
[Flow limitation Mode] (FLM) [Flow limitation] (FLM)
[Delta Pressure] (FLPD) [Friction loss comp] (FLC)
[Flow at Point 1] (FLQ1) [Friction loss comp] (FLC)
[Settings] (SET)

# Internal
 [Inst. Flow Assign.] (FS1A) [Sensors Assignment] (SSC)
[High flow monitoring] (HFP)
[Sleep menu] (SLP)
[Friction loss comp] (FLC)
[Flow limitation] (FLM)
[Stage/Destage Cond.] (SDCM)
[Level Control] (LCC)

[Total Quantity] (FS1C) [Application Parameters] (APR)

[Lowest Flow] (FS1J) [Application Parameters] (APR)
[Highest Flow] (FS1K) [Application Parameters] (APR)
[Installation Flow] (FS1V) [Control] (CTR)
[Application Parameters] (APR)

[Low Freq.Threshold] (FTDL) [Threshold reached] (THRE)

[Settings] (SET)
[Overload T.B.Rest.] (FTO) [Settings] (SET)
[Process overload] (OLD)
[Underload T.B.Rest.] (FTU) [Settings] (SET)
[Process underload] (ULD)
[Ground Fault Activation] (GRFL) [Ground Fault] (GRFL)
[Head Dynamic Gain] (HEG) [Est. Pump Flow Conf] (SLPF)
[Flow estimation] (SFE)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump dP Conf] (SLDP)
[dP/Head Correction] (DPHC)
[Est. Pump dP Conf] (SLDP)
[Est. Pump dP Conf] (SLDP)
[Stage/Destage Cond.] (SDCM)

[Head Static Offset] (HEO) [Est. Pump Flow Conf] (SLPF)

[Flow estimation] (SFE)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump dP Conf] (SLDP)
[dP/Head Correction] (DPHC)
[Est. Pump dP Conf] (SLDP)
[Est. Pump dP Conf] (SLDP)
[Stage/Destage Cond.] (SDCM)

[HighFlowError Resp] (HFPB) [High flow monitoring] (HFP)

[HighFlowError Delay] (HFPD) [High flow monitoring] (HFP)
[Settings] (SET)
[HighFlow MaxLevel] (HFPL) [High flow monitoring] (HFP)
[Settings] (SET)
[HighFlow activation] (HFPM) [High flow monitoring] (HFP)
[Device state] (HS9) [None] (DP9)
[Device state] (HSA) [None] (DPA)
[Device state] (HSB) [None] (DPB)
[Device state] (HSC) [None] (DPC)
[Device state] (HSD) [None] (DPD)
[Device state] (HSE) [None] (DPE)
[Device state] (HSF) [None] (DPF)

[Energy Saving Assign] (IDLS) [Stop and Go] (STG)

[Real Input Energy] (IE0) [Elec Ener Input Counter] (ELI)
[Real Input Energy] (IE1) [Elec Ener Input Counter] (ELI)
[Real Input Energy] (IE2) [Elec Ener Input Counter] (ELI)
[Real Input Energy] (IE3) [Elec Ener Input Counter] (ELI)
[Real Input Energy] (IE4) [Elec Ener Input Counter] (ELI)

# Internal
 [Torque Scaling] (INRT) [data] (MTD)

[ETI state word] (IP9) [None] (DP9)

[ETI state word] (IPA) [None] (DPA)
[iPar Error Code] (IPAD) [PROFINET DIAG] (PRN)
[ETI state word] (IPB) [None] (DPB)
[ETI state word] (IPC) [None] (DPC)
[ETI state word] (IPD) [None] (DPD)
[ETI state word] (IPE) [None] (DPE)
[ETI state word] (IPF) [None] (DPF)
[InletPresError Resp] (IPPB) [Inlet pressure monitoring] (IPP)
[InletPres Max Comp] (IPPC) [Inlet pressure monitoring] (IPP)
[Settings] (SET)
[InletPres High Thd] (IPPH) [Inlet pressure monitoring] (IPP)
[Settings] (SET)
[InletPres Low Thd] (IPPL) [Inlet pressure monitoring] (IPP)
[Settings] (SET)
[InletPres Monitoring] (IPPM) [Inlet pressure monitoring] (IPP)

[Active Input Power] (IPRW) [Elec Ener Input Counter] (ELI)

[Anti-Jam Fwd Acc] (JACC) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Rv Acc] (JACR) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Error Resp] (JAMB) [Anti-Jam Monit] (JAM)
[Anti-Jam Max Seq] (JAMN) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Interval] (JAMT) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Auto Trig] (JATC) [Anti-Jam Monit] (JAM)
[Anti-Jam Fwd Dec] (JDEC) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Rv Dec] (JDER) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Ext Trig] (JETC) [Anti-Jam Monit] (JAM)
[Anti-Jam Fwd Speed] (JFDS) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Fwd Time] (JFDT) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Cycle Nb] (JNBC) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Jockey Selection] (JP) [Jockey pump] (JKP)
[Delay to start] (JPRD) [Jockey pump] (JKP)
[Settings] (SET)
[Minimum Pressure] (JPRP) [Jockey pump] (JKP)
[Settings] (SET)
[Reference Speed] (JPRS) [Jockey pump] (JKP)
[Settings] (SET)
[Maximum Pressure] (JPSP) [Jockey pump] (JKP)
[Settings] (SET)
[Wake up Delay] (JPWD) [Jockey pump] (JKP)
[Settings] (SET)
[Anti-Jam Rv Speed] (JRVS) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Rv Time] (JRVT) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Start Delay] (JTCD) [Anti-Jam Monit] (JAM)
[Settings] (SET)

# Internal
 [Anti-Jam Torque] (JTCL) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Trigger Time] (JTCT) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[Anti-Jam Stop Time] (JZST) [Anti-Jam Monit] (JAM)
[Settings] (SET)
[DI11 Delay] (L11D) [DI11 Configuration] (DI11)
[DI12 Delay] (L12D) [DI12 Configuration] (DI12)
[DI13 Delay] (L13D) [DI13 Configuration] (DI13)
[DI14 Delay] (L14D) [DI14 Configuration] (DI14)
[DI15 Delay] (L15D) [DI15 Configuration] (DI15)
[DI16 Delay] (L16D) [DI16 Configuration] (DI16)
[Last Warning] (LALR) [Diag. data] (DDT)
[LifeCycle Warning] (LCAC) [Drive warranty mgnt] (DWMA)
[Warranty expired] (LCAD) [Drive warranty mgnt] (DWMA)
[Motor current] (LCP9) [None] (DP9)
[Motor current] (LCPA) [None] (DPA)
[Motor current] (LCPB) [None] (DPB)
[Motor current] (LCPC) [None] (DPC)
[Motor current] (LCPD) [None] (DPD)
[Motor current] (LCPE) [None] (DPE)
[Motor current] (LCPF) [None] (DPF)
[Log Distrib. Data 1] (LDD1) [Log dstrb prm select] (LDP)
[Log Distrib. Data 2] (LDD2) [Log dstrb prm select] (LDP)
[Log Distrib. Data 3] (LDD3) [Log dstrb prm select] (LDP)
[Log Distrib. Data 4] (LDD4) [Log dstrb prm select] (LDP)
[Log Distrib State] (LDEN) [Distributed logging] (DLO)
[Dist Max Val 1] (LDM1) [Distributed logging] (DLO)
[Dist Max Val 2] (LDM2) [Distributed logging] (DLO)
[Dist Max Val 3] (LDM3) [Distributed logging] (DLO)
[Dist Max Val 4] (LDM4) [Distributed logging] (DLO)
[Log Distrib Spl Time] (LDST) [Distributed logging] (DLO)
[AI1 4-20mA loss] (LFL1) [4-20 mA loss] (LFL)
[AI2 4-20mA loss] (LFL2) [4-20 mA loss] (LFL)
[AI4 4-20mA loss] (LFL4) [4-20 mA loss] (LFL)
[AI5 4-20mA loss] (LFL5) [4-20 mA loss] (LFL)
[Overload Threshold] (LOC) [Settings] (SET)
[Process overload] (OLD)

[Motor Consumption] (ME0) [Mechanical Energy] (MEC)

[Motor Consumption] (ME1) [Mechanical Energy] (MEC)
[Motor Consumption] (ME2) [Mechanical Energy] (MEC)
[Motor Consumption] (ME3) [Mechanical Energy] (MEC)
[Motor Consumption] (ME4) [Mechanical Energy] (MEC)
[Peak Output Power] (MOEP) [Elec Ener Output Counter] (ELO)

# Internal
 [High Power] (NFHP) [Dry run Monit] (DYR)
[Pump low flow Monit] (PLF)
[High Speed] (NFHS) [Dry run Monit] (DYR)
[Pump low flow Monit] (PLF)
[Low Power] (NFLP) [Dry run Monit] (DYR)
[Pump low flow Monit] (PLF)
[Low Speed] (NFLS) [Dry run Monit] (DYR)
[Pump low flow Monit] (PLF)
[Nb Of Starts] (NSM) [Diag. data] (DDT)
[Counter Management] (ELT)
[Variable Speed Pump] (MPP)
[Elc Energy Cons] (OC0) [kWh Counters] (KWC)
[Elc Energy Cons] (OC1) [kWh Counters] (KWC)
[Elc Energy Cons] (OC2) [kWh Counters] (KWC)
[Elc Energy Cons] (OC3) [kWh Counters] (KWC)
[Elc Energy Cons] (OC4) [kWh Counters] (KWC)

[Elc Egy Today] (OCT) [kWh Counters] (KWC)

[Elec Ener Output Counter] (ELO)
[Elc Egy Yesterday] (OCY) [kWh Counters] (KWC)
[Elec Ener Output Counter] (ELO)
[Real Consumption] (OE0) [Elec Ener Output Counter] (ELO)
[Real Consumption] (OE1) [Elec Ener Output Counter] (ELO)
[Real Consumption] (OE2) [Elec Ener Output Counter] (ELO)
[Real Consumption] (OE3) [Elec Ener Output Counter] (ELO)
[Real Consumption] (OE4) [Elec Ener Output Counter] (ELO)
[Sinus Filter Activation] (OFI) [Motor monitoring] (MOP)

[OutPresError Resp] (OPPB) [Outlet pressure monitoring] (OPP)

[OutPresError Delay] (OPPD) [Outlet pressure monitoring] (OPP)
[Settings] (SET)
[OutPres Max Level] (OPPH) [Outlet pressure monitoring] (OPP)
[Settings] (SET)
[OutPres Min Level] (OPPL) [Outlet pressure monitoring] (OPP)
[Settings] (SET)
[OutPres Monitoring] (OPPM) [Outlet pressure monitoring] (OPP)
[OutPres DI Assign] (OPPW) [Outlet pressure monitoring] (OPP)

# Internal
 [Power Estim Value] (OPRW) [Mechanical Energy] (MEC)
[Dry run Monit] (DYR)
[Pump low flow Monit] (PLF)
[Motor Torque] (OTP9) [None] (DP9)
[Motor Torque] (OTPA) [None] (DPA)
[Motor Torque] (OTPB) [None] (DPB)
[Motor Torque] (OTPC) [None] (DPC)
[Motor Torque] (OTPD) [None] (DPD)
[Motor Torque] (OTPE) [None] (DPE)
[Motor Torque] (OTPF) [None] (DPF)
[Pump Curve Activate] (PCA) [Pump characteristics] (PCR)
[Over-Consumption Thd] (PCAH) [Elec Ener Output Counter] (ELO)
[Under-Consumption Thd] (PCAL) [Elec Ener Output Counter] (ELO)
[Over/Under-Cons Delay] (PCAT) [Elec Ener Output Counter] (ELO)
[Head BEP] (PCBH) [Pump characteristics] (PCR)
[Power BEP] (PCBP) [Pump characteristics] (PCR)
[Flow at BEP] (PCBQ) [Pump characteristics] (PCR)
[Head 1] (PCH1) [Pump characteristics] (PCR)
[Head 2] (PCH2) [Pump characteristics] (PCR)
[Head 3] (PCH3) [Pump characteristics] (PCR)
[Head 4] (PCH4) [Pump characteristics] (PCR)
[Head 5] (PCH5) [Pump characteristics] (PCR)
[Mode] (PCM) [Pump characteristics] (PCR)
[Power 1] (PCP1) [Pump characteristics] (PCR)
[Power 2] (PCP2) [Pump characteristics] (PCR)
[Power 3] (PCP3) [Pump characteristics] (PCR)
[Power 4] (PCP4) [Pump characteristics] (PCR)
[Power 5] (PCP5) [Pump characteristics] (PCR)
[PumpCycleError Resp] (PCPB) [Pumpcycle monitoring] (CSP)
[PumpCycle Monitor] (PCPM) [Pumpcycle monitoring] (CSP)
[PumpCycle MaxStarts] (PCPN) [Pumpcycle monitoring] (CSP)
[Settings] (SET)
[PumpCycle timeframe] (PCPT) [Pumpcycle monitoring] (CSP)
[Settings] (SET)
[Flow 1] (PCQ1) [Pump characteristics] (PCR)
[Flow 2] (PCQ2) [Pump characteristics] (PCR)
[Flow 3] (PCQ3) [Pump characteristics] (PCR)
[Flow 4] (PCQ4) [Pump characteristics] (PCR)
[Flow 5] (PCQ5) [Pump characteristics] (PCR)
[Status] (PCS) [Pump characteristics] (PCR)
[Pump Speed] (PCSP) [Pump characteristics] (PCR)
[Power Dynamic Gain] (PEG) [Est. Pump Flow Conf] (SLPF)
[Flow estimation] (SFE)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump Flow Conf] (SLPF)
[Power Static Offset] (PEO) [Est. Pump Flow Conf] (SLPF)
[Flow estimation] (SFE)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump Flow Conf] (SLPF)

[Activation Source] (PFEC) [Pipe fill] (PFI)

[Pipe Fill Pressure] (PFHP) [Pipe fill] (PFI)
[Settings] (SET)
[Pipe Fill Speed] (PFHS) [Pipe fill] (PFI)
[Settings] (SET)
[Pipe Fill Time] (PFHT) [Pipe fill] (PFI)
[Settings] (SET)

# Internal
 [DI5 Frequency Filter] (PFI5) [DI5 Frequency measured] (PFC5)
[DI5 Pulse Config] (PAI5)
[DI6 Frequency Filter] (PFI6) [DI6 Frequency measured] (PFC6)
[DI6 Pulse Config] (PAI6)
[U/F Profile] (PFL) [Motor control] (DRC)
[Activation Mode] (PFM) [Pipe fill] (PFI)
[PID Fdbk Error Resp] (PFMB) [Feedback Monitoring] (FKM)
[Feedback Monitoring] (FKM)
[Feedback Monitoring] (FKM)
[PID Fdbk Error Delay] (PFMD) [Feedback Monitoring] (FKM)
[Feedback Monitoring] (FKM)
[Feedback Monitoring] (FKM)
[Settings] (SET)
[PID Fdbk Monitoring] (PFMM) [Feedback Monitoring] (FKM)
[Feedback Monitoring] (FKM)
[Feedback Monitoring] (FKM)
[PID Fdbk Range] (PFMR) [Feedback Monitoring] (FKM)
[Feedback Monitoring] (FKM)
[Feedback Monitoring] (FKM)
[Settings] (SET)
[Output Ph Rotation] (PHR) [Motor control] (DRC)
[DI5 Min Process] (PI5J) [PI5 Sensor Config] (IF8)
[PI5 Sensor Config] (PF8)
[PI5 Sensor Config] (BIP5)
[PI5 Sensor Config] (LIP5)
[PI5 Sensor Config] (SIF8)
[PI5 Sensor Config] (FIF8)
[PI5 Sensor Config] (LF8)
[PI5 Sensor Config] (NPF8)
[PI5 Sensor Config] (HIF8)

[DI5 Max Process] (PI5K) [PI5 Sensor Config] (IF8)

[PI5 Sensor Config] (PF8)
[PI5 Sensor Config] (BIP5)
[PI5 Sensor Config] (LIP5)
[PI5 Sensor Config] (SIF8)
[PI5 Sensor Config] (FIF8)
[PI5 Sensor Config] (LF8)
[PI5 Sensor Config] (NPF8)
[PI5 Sensor Config] (HIF8)

[DI6 Min Process] (PI6J) [PI6 Sensor Config] (IF9)

[PI6 Sensor Config] (PF9)
[PI6 Sensor Config] (BIP6)
[PI6 Sensor Config] (LIP6)
[PI6 Sensor Config] (SIF9)
[PI6 Sensor Config] (FIF9)
[PI6 Sensor Config] (LF9)
[PI6 Sensor Config] (NPF9)
[PI6 Sensor Config] (HIF9)

[DI6 Max Process] (PI6K) [PI6 Sensor Config] (IF9)

[PI6 Sensor Config] (PF9)
[PI6 Sensor Config] (BIP6)
[PI6 Sensor Config] (LIP6)
[PI6 Sensor Config] (SIF9)
[PI6 Sensor Config] (FIF9)
[PI6 Sensor Config] (LF9)
[PI6 Sensor Config] (NPF9)
[PI6 Sensor Config] (HIF9)

# Internal
[DI5 PulseInput High Freq] (PIH5) [DI5 Frequency measured] (PFC5)
[DI5 Pulse Config] (PAI5)
[PI5 Sensor Config] (IF8)
[PI5 Sensor Config] (PF8)
[PI5 Sensor Config] (BIP5)
[PI5 Sensor Config] (LIP5)
[PI5 Sensor Config] (SIF8)
[PI5 Sensor Config] (FIF8)
[PI5 Sensor Config] (LF8)
[PI5 Sensor Config] (NPF8)
[PI5 Sensor Config] (HIF8)

[DI6 PulseInput High Freq] (PIH6) [DI6 Frequency measured] (PFC6)

[DI6 Pulse Config] (PAI6)
[PI6 Sensor Config] (IF9)
[PI6 Sensor Config] (PF9)
[PI6 Sensor Config] (BIP6)
[PI6 Sensor Config] (LIP6)
[PI6 Sensor Config] (SIF9)
[PI6 Sensor Config] (FIF9)
[PI6 Sensor Config] (LF9)
[PI6 Sensor Config] (NPF9)
[PI6 Sensor Config] (HIF9)

[DI5 PulseInput Low Freq] (PIL5) [DI5 Frequency measured] (PFC5)

[DI5 Pulse Config] (PAI5)
[PI5 Sensor Config] (IF8)
[PI5 Sensor Config] (PF8)
[PI5 Sensor Config] (BIP5)
[PI5 Sensor Config] (LIP5)
[PI5 Sensor Config] (SIF8)
[PI5 Sensor Config] (FIF8)
[PI5 Sensor Config] (LF8)
[PI5 Sensor Config] (NPF8)
[PI5 Sensor Config] (HIF8)

[DI6 PulseInput Low Freq] (PIL6) [DI6 Frequency measured] (PFC6)

[DI6 Pulse Config] (PAI6)
[PI6 Sensor Config] (IF9)
[PI6 Sensor Config] (PF9)
[PI6 Sensor Config] (BIP6)
[PI6 Sensor Config] (LIP6)
[PI6 Sensor Config] (SIF9)
[PI6 Sensor Config] (FIF9)
[PI6 Sensor Config] (LF9)
[PI6 Sensor Config] (NPF9)
[PI6 Sensor Config] (HIF9)

[PumpLF ActivDelay] (PLFA) [Pump low flow Monit] (PLF)

[Settings] (SET)
[PumpLF Error Resp] (PLFB) [Pump low flow Monit] (PLF)
[PumpLF Error Delay] (PLFD) [Pump low flow Monit] (PLF)
[Settings] (SET)
[PumpLF Min Level] (PLFL) [Pump low flow Monit] (PLF)
[Settings] (SET)
[PumpLF Monitoring] (PLFM) [Pump low flow Monit] (PLF)
[PumpLF Restart Delay] (PLFR) [Pump low flow Monit] (PLF)
[Settings] (SET)
[PumpLF DI Assign] (PLFW) [Pump low flow Monit] (PLF)
[PumpLF Power Factor] (PLFX) [Pump low flow Monit] (PLF)
[Settings] (SET)
[Priming Pump Assign] (PPOA) [Priming pump ctrl] (PPC)
[Priming Time] (PPSD) [Priming pump ctrl] (PPC)
[Settings] (SET)
[InletPres Assign] (PS1A) [Sensors Assignment] (SSC)
[Inlet pressure monitoring] (IPP)
[Priming pump ctrl] (PPC)

# Internal
 [Inlet Press. Value] (PS1V) [Variable Speed Pump] (MPP)
[Control] (CTR)
[Application Parameters] (APR)
[OutletPres Assign] (PS2A) [Sensors Assignment] (SSC)
[Outlet pressure monitoring] (OPP)
[Pipe fill] (PFI)
[Sleep menu] (SLP)
[Wake up menu] (WKP)
[Outlet Pressure] (PS2V) [Variable Speed Pump] (MPP)
[Control] (CTR)
[Application Parameters] (APR)
[R3 Assignment] (R3) [R3 configuration] (R3)
[R3 Delay time] (R3D) [R3 configuration] (R3)
[R3 Holding time] (R3H) [R3 configuration] (R3)
[R3 Active at] (R3S) [R3 configuration] (R3)
[R4 Assignment] (R4) [R4 configuration] (R4)
[R4 Delay time] (R4D) [R4 configuration] (R4)
[R4 Holding time] (R4H) [R4 configuration] (R4)
[R4 Active at] (R4S) [R4 configuration] (R4)
[R5 Assignment] (R5) [R5 configuration] (R5)
[R5 Delay time] (R5D) [R5 configuration] (R5)
[R5 Holding time] (R5H) [R5 configuration] (R5)
[R5 Active at] (R5S) [R5 configuration] (R5)
[R6 Assignment] (R6) [R6 configuration] (R6)
[R6 activ delay time] (R6D) [R6 configuration] (R6)
[R6 hold delay time] (R6H) [R6 configuration] (R6)
[R6 Active at] (R6S) [R6 configuration] (R6)
[FlowLim Thd Disable] (RCHT) [Settings] (SET)
[Flow limitation] (FLM)
[Motor frequency] (RFP9) [None] (DP9)
[Motor frequency] (RFPA) [None] (DPA)
[Motor frequency] (RFPB) [None] (DPB)
[Motor frequency] (RFPC) [None] (DPC)
[Motor frequency] (RFPD) [None] (DPD)
[Motor frequency] (RFPE) [None] (DPE)
[Motor frequency] (RFPF) [None] (DPF)
[Liquid Density] (RHO) [Define system units] (SUC)
[Reference high Thd] (RTD) [Threshold reached] (THRE)
[Settings] (SET)
[Reference low Thd] (RTDL) [Threshold reached] (THRE)
[Settings] (SET)
[Run Elapsed time] (RTP9) [None] (DP9)
[Run Elapsed time] (RTPA) [None] (DPA)
[Run Elapsed time] (RTPB) [None] (DPB)
[Run Elapsed time] (RTPC) [None] (DPC)
[Run Elapsed time] (RTPD) [None] (DPD)
[Run Elapsed time] (RTPE) [None] (DPE)
[Run Elapsed time] (RTPF) [None] (DPF)

[Switching Frequency] (SFP9) [None] (DP9)

[Switching Frequency] (SFPA) [None] (DPA)
[Switching Frequency] (SFPB) [None] (DPB)
[Switching Frequency] (SFPC) [None] (DPC)
[Switching Frequency] (SFPD) [None] (DPD)
[Switching Frequency] (SFPE) [None] (DPE)
[Switching Frequency] (SFPF) [None] (DPF)
[PID Start Ref Freq] (SFS) [Settings] (ST)
[Settings] (ST)
[Settings] (ST)
[Settings] (SET)

# Internal
[Sleep Boost Speed] (SLBS) [Boost] (SBT)
[Settings] (SET)
[Sleep Boost Time] (SLBT) [Boost] (SBT)
[Settings] (SET)
[Sleep Offset Thres.] (SLE) [Settings] (SET)
[Stop after speed timeout] (PRSP)
[Est. Pump Flow] (SLFV) [Control] (CTR)
[Variable Speed Pump] (MPP)
[Est. Pump Flow Conf] (SLPF)
[Flow estimation] (SFE)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump Head] (SLHV) [Variable Speed Pump] (MPP)
[dP/Head Correction] (DPHC)
[Sleep Flow Level] (SLNL) [Sleep menu] (SLP)
[Settings] (SET)
[Sleep Delay] (SLPD) [Sleep menu] (SLP)
[Settings] (SET)
[Sleep Detect Mode] (SLPM) [Sleep menu] (SLP)
[Sleep Power Level] (SLPR) [Sleep menu] (SLP)
[Settings] (SET)
[Sleep Switch Assign] (SLPW) [Sleep menu] (SLP)
[Sleep Min Speed] (SLSL) [Sleep menu] (SLP)
[Settings] (SET)
[Motor Speed] (SPD) [Pump Dashboard] (PMT)
[Fan Dashboard] (FAN)
[Motor parameters] (MMO)

[Stall Max Time] (STP1) [Settings] (SET)

[Stall monitoring] (STPR)
[Stall Current] (STP2) [Settings] (SET)
[Stall monitoring] (STPR)
[Stall Frequency] (STP3) [Settings] (SET)
[Stall monitoring] (STPR)
[Stall Monitoring] (STPC) [Stall monitoring] (STPR)
[Currency unit list] (SUCU) [Define system units] (SUC)
[Flow rate unit] (SUFR) [Define system units] (SUC)
[P sensor unit] (SUPR) [Define system units] (SUC)
[Temperature unit] (SUTP) [Define system units] (SUC)
[Modbus 2 baud rate] (TBR2) [Modbus HMI] (MD2)
[Drive Thermal State] (TDP9) [None] (DP9)
[Drive Thermal State] (TDPA) [None] (DPA)
[Drive Thermal State] (TDPB) [None] (DPB)

# Internal
[Drive Thermal State] (TDPC) [None] (DPC)
[Drive Thermal State] (TDPD) [None] (DPD)
[Drive Thermal State] (TDPE) [None] (DPE)
[Drive Thermal State] (TDPF) [None] (DPF)
[Modbus 2 format] (TFO2) [Modbus HMI] (MD2)
[AI2 Th Warn Level] (TH2A) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Settings] (SET)
[Thermal monitoring] (TPP)
[AI2 Th Error Resp] (TH2B) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI2 Th Error Level] (TH2F) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Settings] (SET)
[Thermal monitoring] (TPP)
[AI2 Th Monitoring] (TH2S) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI2 Th Value] (TH2V) [Thermal Monitoring] (TPM)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI3 Th Warn Level] (TH3A) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Settings] (SET)
[Thermal monitoring] (TPP)
[AI3 Th Error Resp] (TH3B) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI3 Th Error Level] (TH3F) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Settings] (SET)
[Thermal monitoring] (TPP)
[AI3 Th Monitoring] (TH3S) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI3 Th Value] (TH3V) [Thermal Monitoring] (TPM)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI4 Th Warn Level] (TH4A) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Settings] (SET)
[Thermal monitoring] (TPP)
[AI4 Th Error Resp] (TH4B) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI4 Th Error Level] (TH4F) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Settings] (SET)
[Thermal monitoring] (TPP)
[AI4 Th Monitoring] (TH4S) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI4 Th Value] (TH4V) [Thermal Monitoring] (TPM)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI5 Th Warn Level] (TH5A) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Settings] (SET)
[Thermal monitoring] (TPP)

# Internal
 [AI5 Th Error Resp] (TH5B) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI5 Th Error Level] (TH5F) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Settings] (SET)
[Thermal monitoring] (TPP)
[AI5 Th Monitoring] (TH5S) [Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[AI5 Th Value] (TH5V) [Thermal Monitoring] (TPM)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Thermal monitoring] (TPP)
[Motor therm state] (THP9) [None] (DP9)
[Motor therm state] (THPA) [None] (DPA)
[Motor therm state] (THPB) [None] (DPB)
[Motor therm state] (THPC) [None] (DPC)
[Motor therm state] (THPD) [None] (DPD)
[Motor therm state] (THPE) [None] (DPE)
[Motor therm state] (THPF) [None] (DPF)
[IGBT Junction Temp] (TJP9) [None] (DP9)
[IGBT Junction Temp] (TJPA) [None] (DPA)
[IGBT Junction Temp] (TJPB) [None] (DPB)
[IGBT Junction Temp] (TJPC) [None] (DPC)
[IGBT Junction Temp] (TJPD) [None] (DPD)
[IGBT Junction Temp] (TJPE) [None] (DPE)
[IGBT Junction Temp] (TJPF) [None] (DPF)
[Type of control] (TOCT) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[Booster Control] (BSC)

[AI3 Max Value] (UIH3) [PID Feedback] (FDB)

[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI3] (AI3C)
[AI3 configuration] (AI3)
[AI3 sensor config.] (ICA3)
[AI3 Sensor Config.] (OCA3)
[AI3 sensor config.] (IF3)
[AI3 Sensor config.] (PF3)
[AI3 Sensor Config.] (LCS3)
[AI3 Sensor Config.] (BIF3)
[AI3 Configuration] (LCA3)
[AI3 Configuration] (LIF3)
[AI3 Sensor config.] (SIF3)
[AI3 Sensor Config.] (SOA3)
[AI3 Sensor Config.] (WOA3)
[AI3 Sensor Config.] (PFA3)
[AI3 Installation Flow] (FIF3)
[AI3 Configuration] (PPA3)
[AI3 Sensor Config.] (LF3)
[AI3 Sensor config.] (NPF3)
[AI3 sensor config.] (IPA3)
[AI3 Sensor config.] (OOA3)
[AI3 sensor config.] (HIF3)

# Internal
[AI4 Max Value] (UIH4) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI4] (AI4C)
[AI4 configuration] (AI4)
[AI4 sensor config.] (ICA4)
[AI4 Sensor Config.] (OCA4)
[AI4 sensor config.] (IF4)
[AI4 Sensor config.] (PF4)
[AI4 Sensor Config.] (LCS4)
[AI4 Sensor Config.] (BIF4)
[AI4 Configuration] (LCA4)
[AI4 Configuration] (LIF4)
[AI4 Sensor config.] (SIF4)
[AI4 Sensor Config.] (SOA4)
[AI4 Sensor Config.] (WOA4)
[AI4 Sensor Config.] (PFA4)
[AI4 Installation Flow] (FIF4)
[AI4 Configuration] (PPA4)
[AI4 Sensor Config.] (LF4)
[AI4 Sensor config.] (NPF4)
[AI4 sensor config.] (IPA4)
[AI4 Sensor config.] (OOA4)
[AI4 sensor config.] (HIF4)

[AI5 Max Value] (UIH5) [PID Feedback] (FDB)

[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI5] (AI5C)
[AI5 configuration] (AI5)
[AI5 sensor config.] (ICA5)
[AI5 Sensor Config.] (OCA5)
[AI5 sensor config.] (IF5)
[AI5 Sensor config.] (PF5)
[AI5 Sensor Config.] (LCS5)
[AI5 Sensor Config.] (BIF5)
[AI5 Configuration] (LCA5)
[AI5 Configuration] (LIF5)
[AI5 Sensor config.] (SIF5)
[AI5 Sensor Config.] (SOA5)
[AI5 Sensor Config.] (WOA5)
[AI5 Sensor Config.] (PFA5)
[AI5 Installation Flow] (FIF5)
[AI5 Configuration] (PPA5)
[AI5 Sensor Config.] (LF5)
[AI5 Sensor config.] (NPF5)
[AI5 sensor config.] (IPA5)
[AI5 Sensor config.] (OOA5)
[AI5 sensor config.] (HIF5)

# Internal
[AI3 Min. Value] (UIL3) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI3] (AI3C)
[AI3 configuration] (AI3)
[AI3 sensor config.] (ICA3)
[AI3 Sensor Config.] (OCA3)
[AI3 sensor config.] (IF3)
[AI3 Sensor config.] (PF3)
[AI3 Sensor Config.] (LCS3)
[AI3 Sensor Config.] (BIF3)
[AI3 Configuration] (LCA3)
[AI3 Configuration] (LIF3)
[AI3 Sensor config.] (SIF3)
[AI3 Sensor Config.] (SOA3)
[AI3 Sensor Config.] (WOA3)
[AI3 Sensor Config.] (PFA3)
[AI3 Installation Flow] (FIF3)
[AI3 Configuration] (PPA3)
[AI3 Sensor Config.] (LF3)
[AI3 Sensor config.] (NPF3)
[AI3 sensor config.] (IPA3)
[AI3 Sensor config.] (OOA3)
[AI3 sensor config.] (HIF3)

[AI4 Min. Value] (UIL4) [PID Feedback] (FDB)

[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI4] (AI4C)
[AI4 configuration] (AI4)
[AI4 sensor config.] (ICA4)
[AI4 Sensor Config.] (OCA4)
[AI4 sensor config.] (IF4)
[AI4 Sensor config.] (PF4)
[AI4 Sensor Config.] (LCS4)
[AI4 Sensor Config.] (BIF4)
[AI4 Configuration] (LCA4)
[AI4 Configuration] (LIF4)
[AI4 Sensor config.] (SIF4)
[AI4 Sensor Config.] (SOA4)
[AI4 Sensor Config.] (WOA4)
[AI4 Sensor Config.] (PFA4)
[AI4 Installation Flow] (FIF4)
[AI4 Configuration] (PPA4)
[AI4 Sensor Config.] (LF4)
[AI4 Sensor config.] (NPF4)
[AI4 sensor config.] (IPA4)
[AI4 Sensor config.] (OOA4)
[AI4 sensor config.] (HIF4)

# Internal
 [AI5 Min. Value] (UIL5) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI5] (AI5C)
[AI5 configuration] (AI5)
[AI5 sensor config.] (ICA5)
[AI5 Sensor Config.] (OCA5)
[AI5 sensor config.] (IF5)
[AI5 Sensor config.] (PF5)
[AI5 Sensor Config.] (LCS5)
[AI5 Sensor Config.] (BIF5)
[AI5 Configuration] (LCA5)
[AI5 Configuration] (LIF5)
[AI5 Sensor config.] (SIF5)
[AI5 Sensor Config.] (SOA5)
[AI5 Sensor Config.] (WOA5)
[AI5 Sensor Config.] (PFA5)
[AI5 Installation Flow] (FIF5)
[AI5 Configuration] (PPA5)
[AI5 Sensor Config.] (LF5)
[AI5 Sensor config.] (NPF5)
[AI5 sensor config.] (IPA5)
[AI5 Sensor config.] (OOA5)
[AI5 sensor config.] (HIF5)

[DC bus voltage] (ULP9) [None] (DP9)

[DC bus voltage] (ULPA) [None] (DPA)
[DC bus voltage] (ULPB) [None] (DPB)
[DC bus voltage] (ULPC) [None] (DPC)
[DC bus voltage] (ULPD) [None] (DPD)
[DC bus voltage] (ULPE) [None] (DPE)
[DC bus voltage] (ULPF) [None] (DPF)
[AQ2 max Output] (UOH2) [AQ2] (AO2C)
[AQ2 configuration] (AO2)
[AQ2 min Output] (UOL2) [AQ2] (AO2C)
[AQ2 configuration] (AO2)
[DC bus voltage] (VBUS) [Drive parameters] (MPI)
[Catch on Fly Sensitivity] (VCB) [Catch on the fly] (FLR)
[Wake Up Process Error] (WUPE) [Wake up menu] (WKP)
[Settings] (SET)
[Wake Up Process level] (WUPF) [Wake up menu] (WKP)
[Settings] (SET)
[Wake Up Mode] (WUPM) [Wake up menu] (WKP)
[Reference Power] (PREF) [Energy Saving] (ESA)

[AIV1 Lowest Process] (AV1J) [AIV1 Sensor Config.] (ICV1)

[AIV1 Sensor Config.] (OCV1)
[AIV1 Sensor Config.] (IFV1)
[AIV1 Configuration] (PFV1)
[AIV1 Sensor Config.] (LSV1)
[AIV1 Sensor Config.] (BIV1)
[AIV1 Configuration] (LCV1)
[AIV1 Configuration] (LIV1)
[AIV1 Sensor Config.] (SIV1)
[AIV1 Sensor Config.] (SOV1)
[AIV1 Sensor Config.] (WOV1)
[AIV1 Sensor Config.] (PF1V)
[AIV1 Sensor Config.] (FIV1)
[AIV1 Configuration] (PPV1)
[AIV1 Sensor Config.] (LFV1)
[AIV1 Sensor Config.] (NPV1)
[AIV1 Sensor Config.] (IPV1)
[AIV1 Sensor Config.] (OOV1)
[AIV1 Sensor Config.] (HIV1)

# Internal
 [AIV1 Highest Process] (AV1K) [AIV1 Sensor Config.] (ICV1)
[AIV1 Sensor Config.] (OCV1)
[AIV1 Sensor Config.] (IFV1)
[AIV1 Configuration] (PFV1)
[AIV1 Sensor Config.] (LSV1)
[AIV1 Sensor Config.] (BIV1)
[AIV1 Configuration] (LCV1)
[AIV1 Configuration] (LIV1)
[AIV1 Sensor Config.] (SIV1)
[AIV1 Sensor Config.] (SOV1)
[AIV1 Sensor Config.] (WOV1)
[AIV1 Sensor Config.] (PF1V)
[AIV1 Sensor Config.] (FIV1)
[AIV1 Configuration] (PPV1)
[AIV1 Sensor Config.] (LFV1)
[AIV1 Sensor Config.] (NPV1)
[AIV1 Sensor Config.] (IPV1)
[AIV1 Sensor Config.] (OOV1)
[AIV1 Sensor Config.] (HIV1)

[Motor Mechanical speed] (SPDM) [Variable Speed Pump] (MPP)

[Ref Freq Channel] (DRC9) [None] (DP9)
[Ref Freq Channel] (DRCA) [None] (DPA)
[Ref Freq Channel] (DRCB) [None] (DPB)
[Ref Freq Channel] (DRCC) [None] (DPC)
[Ref Freq Channel] (DRCD) [None] (DPD)
[Ref Freq Channel] (DRCE) [None] (DPE)
[Ref Freq Channel] (DRCF) [None] (DPF)
[Command Channel] (DCC9) [None] (DP9)
[Command Channel] (DCCA) [None] (DPA)
[Command Channel] (DCCB) [None] (DPB)
[Command Channel] (DCCZ) [None] (DPC)
[Command Channel] (DCCD) [None] (DPD)
[Command Channel] (DCCE) [None] (DPE)
[Command Channel] (DCCF) [None] (DPF)
[Pipe Fill on Wake Up] (PFWU) [Pipe fill] (PFI)
[Sleep Pressure Level] (SLPL) [Sleep menu] (SLP)
[Settings] (SET)
[Wake Up Press level] (WUPL) [Wake up menu] (WKP)
[Settings] (SET)

[Pre-settings Status] (PSS) [Pre-settings] (PRES)

[CB status] (CBS) [Circuit breaker] (CCBK)

[Power Brick Error ID] (BPI1) [None] (DP1)

[Power Brick Error ID] (BPI2) [None] (DP2)
[Power Brick Error ID] (BPI3) [None] (DP3)
[Power Brick Error ID] (BPI4) [None] (DP4)
[Power Brick Error ID] (BPI5) [None] (DP5)
[Power Brick Error ID] (BPI6) [None] (DP6)
[Power Brick Error ID] (BPI7) [None] (DP7)
[Power Brick Error ID] (BPI8) [None] (DP8)
[Power Brick Error ID] (BPI9) [None] (DP9)
[Power Brick Error ID] (BPIA) [None] (DPA)
[Power Brick Error ID] (BPIB) [None] (DPB)
[Power Brick Error ID] (BPIC) [None] (DPC)
[Power Brick Error ID] (BPID) [None] (DPD)
[Power Brick Error ID] (BPIE) [None] (DPE)
[Power Brick Error ID] (BPIF) [None] (DPF)

# Internal
[AFE Power brick error ID] (BFI1) [None] (DP1)
[AFE Power brick error ID] (BFI2) [None] (DP2)
[AFE Power brick error ID] (BFI3) [None] (DP3)
[AFE Power brick error ID] (BFI4) [None] (DP4)
[AFE Power brick error ID] (BFI5) [None] (DP5)
[AFE Power brick error ID] (BFI6) [None] (DP6)
[AFE Power brick error ID] (BFI7) [None] (DP7)
[AFE Power brick error ID] (BFI8) [None] (DP8)
[AFE Power brick error ID] (BFI9) [None] (DP9)
[AFE Power brick error ID] (BFIA) [None] (DPA)
[AFE Power brick error ID] (BFIB) [None] (DPB)
[AFE Power brick error ID] (BFIC) [None] (DPC)
[AFE Power brick error ID] (BFID) [None] (DPD)
[AFE Power brick error ID] (BFIE) [None] (DPE)
[AFE Power brick error ID] (BFIF) [None] (DPF)
[Mains Current] (ILN) [Drive parameters] (MPI)
[Input Reactive Power] (IQRW) [Elec Ener Input Counter] (ELI)
[Input Power Factor] (PWF) [Elec Ener Input Counter] (ELI)
[Mains Frequency] (FAC) [Drive parameters] (MPI)

[AFE Fan Operation Time] (FBAT) [Counter Management] (ELT)

[Cabinet Fan Oper Time] (FCT) [Counter Management] (ELT)

[AFE Nb of starts] (BNSA) [Counter Management] (ELT)

[AFE Generator Mode] (CLIG) [Settings] (SET)
[Active Front End] (AFE)
[Autotuning Type] (TUNT) [Motor tune] (MTU)
[Signed Mech Speed] (SPD1) [Motor parameters] (MMO)
[FDR Error Status] (FDR0) [Fast Device Replacement] (FDR)
[FDR Operating State] (FDS0) [Fast Device Replacement] (FDR)
[FDR Action] (FDA0) [Fast Device Replacement] (FDR)
[Enable FDR] (FDV0) [Fast Device Replacement] (FDR)
[Error Info (INF6)] (INF6) [Diag. data] (DDT)
[Device State] (HS1) [None] (DP1)
[Device State] (HS2) [None] (DP2)
[Device State] (HS3) [None] (DP3)
[Device State] (HS4) [None] (DP4)
[Device State] (HS5) [None] (DP5)
[Device State] (HS6) [None] (DP6)
[Device State] (HS7) [None] (DP7)
[Device State] (HS8) [None] (DP8)
[Motor Torque (Nm)] (OTQN) [Motor parameters] (MMO)
[Nom Motor torque] (TQN) [Motor parameters] (MMO)
[data] (MTD)
[Mains voltage phase 1-2] (UL1) [Drive parameters] (MPI)
[Mains voltage phase 2-3] (UL2) [Drive parameters] (MPI)
[Mains voltage phase 3-1] (UL3) [Drive parameters] (MPI)
[Application Selection] (APPT) [Macro Configuration] (MCR)
[Motor param choice] (MPC) [data] (MTD)
[Currents Filter] (CRFA) [data] (MTD)
[Relative d-axis error] (RDAE) [data] (MTD)
[Autotuning Usage] (TUNU) [Motor tune] (MTU)
[Autotuning Lvl Of Current] (TCR) [Motor tune] (MTU)
[Rotational Current Level] (RCL) [Motor tune] (MTU)
[RCI With Transformer] (RCIR) [Motor tune] (MTU)
[RCI Max Freq] (RCSP) [Motor tune] (MTU)
[Boost] (BOO) [Motor control] (DRC)
[Freq Boost] (FAB) [Motor control] (DRC)
[External FeedFwd Assign] (TEFF) [Spd Loop Optimization] (MCL)

# Internal
[MDL Comm Timeout] (MLTO) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)
[Pmax Motor] (TPMM) [Torque limitation] (TOL)
[Settings] (SET)
[Pmax Generator] (TPMG) [Torque limitation] (TOL)
[Settings] (SET)
[Term word order] (TWO) [Modbus Fieldbus] (MD1)
[Term 2 word order] (TWO2) [Modbus HMI] (MD2)
[AIV2 Lowest Process] (AV2J) [AIV2 Sensor Config.] (ICV2)
[AIV2 Sensor Config.] (OCV2)
[AIV2 Sensor Config.] (IFV2)
[AIV2 Configuration] (PFV2)
[AIV2 Sensor Config.] (LSV2)
[AIV2 Sensor Config.] (BIV2)
[AIV2 Configuration] (LCV2)
[AIV2 Configuration] (LIV2)
[AIV2 Sensor Config.] (SIV2)
[AIV2 Sensor Config.] (SOV2)
[AIV2 Sensor Config.] (WOV2)
[AIV2 Sensor Config.] (PF2V)
[AIV2 Sensor Config.] (FIV2)
[AIV2 Sensor Config.] (PPV2)
[AIV2 Sensor Config.] (LFV2)
[AIV2 Sensor Config.] (NPV2)
[AIV2 Sensor Config.] (IPV2)
[AIV2 Sensor Config.] (OOV2)
[AIV2 Sensor Config.] (HIV2)

[AIV2 Highest Process] (AV2K) [AIV2 Sensor Config.] (ICV2)

[AIV2 Sensor Config.] (OCV2)
[AIV2 Sensor Config.] (IFV2)
[AIV2 Configuration] (PFV2)
[AIV2 Sensor Config.] (LSV2)
[AIV2 Sensor Config.] (BIV2)
[AIV2 Configuration] (LCV2)
[AIV2 Configuration] (LIV2)
[AIV2 Sensor Config.] (SIV2)
[AIV2 Sensor Config.] (SOV2)
[AIV2 Sensor Config.] (WOV2)
[AIV2 Sensor Config.] (PF2V)
[AIV2 Sensor Config.] (FIV2)
[AIV2 Sensor Config.] (PPV2)
[AIV2 Sensor Config.] (LFV2)
[AIV2 Sensor Config.] (NPV2)
[AIV2 Sensor Config.] (IPV2)
[AIV2 Sensor Config.] (OOV2)
[AIV2 Sensor Config.] (HIV2)

[AIV2 Image input] (AIV2) [Drive parameters] (MPI)

# Internal
[AIV2 Channel Assign] (AIC2) [Virtual AI2] (AV2)
[AIV2 Sensor Config.] (ICV2)
[AIV2 Sensor Config.] (OCV2)
[AIV2 Sensor Config.] (IFV2)
[AIV2 Configuration] (PFV2)
[AIV2 Sensor Config.] (LSV2)
[AIV2 Sensor Config.] (BIV2)
[AIV2 Configuration] (LCV2)
[AIV2 Configuration] (LIV2)
[AIV2 Sensor Config.] (SIV2)
[AIV2 Sensor Config.] (SOV2)
[AIV2 Sensor Config.] (WOV2)
[AIV2 Sensor Config.] (PF2V)
[AIV2 Sensor Config.] (FIV2)
[AIV2 Sensor Config.] (PPV2)
[AIV2 Sensor Config.] (LFV2)
[AIV2 Sensor Config.] (NPV2)
[AIV2 Sensor Config.] (IPV2)
[AIV2 Sensor Config.] (OOV2)
[AIV2 Sensor Config.] (HIV2)

[AIV3 Lowest Process] (AV3J) [AIV3 Sensor Config.] (ICV3)

[AIV3 Sensor Config.] (OCV3)
[AIV3 Sensor Config.] (IFV3)
[AIV3 Configuration] (PFV3)
[AIV3 Sensor Config.] (LSV3)
[AIV3 Sensor Config.] (BIV3)
[AIV3 Configuration] (LCV3)
[AIV3 Configuration] (LIV3)
[AIV3 Sensor Config.] (SIV3)
[AIV3 Sensor Config.] (SOV3)
[AIV3 Sensor Config.] (WOV3)
[AIV3 Sensor Config.] (PF3V)
[AIV3 Sensor Config.] (FIV3)
[AIV3 Sensor Config.] (PPV3)
[AIV3 Sensor Config.] (LFV3)
[AIV3 Sensor Config.] (NPV3)
[AIV3 Sensor Config.] (IPV3)
[AIV3 Sensor Config.] (OOV3)
[AIV3 Sensor Config.] (HIV3)

[AIV3 Highest Process] (AV3K) [AIV3 Sensor Config.] (ICV3)

[AIV3 Sensor Config.] (OCV3)
[AIV3 Sensor Config.] (IFV3)
[AIV3 Configuration] (PFV3)
[AIV3 Sensor Config.] (LSV3)
[AIV3 Sensor Config.] (BIV3)
[AIV3 Configuration] (LCV3)
[AIV3 Configuration] (LIV3)
[AIV3 Sensor Config.] (SIV3)
[AIV3 Sensor Config.] (SOV3)
[AIV3 Sensor Config.] (WOV3)
[AIV3 Sensor Config.] (PF3V)
[AIV3 Sensor Config.] (FIV3)
[AIV3 Sensor Config.] (PPV3)
[AIV3 Sensor Config.] (LFV3)
[AIV3 Sensor Config.] (NPV3)
[AIV3 Sensor Config.] (IPV3)
[AIV3 Sensor Config.] (OOV3)
[AIV3 Sensor Config.] (HIV3)

[AIV3 Image input] (AIV3) [Drive parameters] (MPI)

# Internal
 [AIV3 Channel Assign] (AIC3) [Virtual AI3] (AV3)
[AIV3 Sensor Config.] (ICV3)
[AIV3 Sensor Config.] (OCV3)
[AIV3 Sensor Config.] (IFV3)
[AIV3 Configuration] (PFV3)
[AIV3 Sensor Config.] (LSV3)
[AIV3 Sensor Config.] (BIV3)
[AIV3 Configuration] (LCV3)
[AIV3 Configuration] (LIV3)
[AIV3 Sensor Config.] (SIV3)
[AIV3 Sensor Config.] (SOV3)
[AIV3 Sensor Config.] (WOV3)
[AIV3 Sensor Config.] (PF3V)
[AIV3 Sensor Config.] (FIV3)
[AIV3 Sensor Config.] (PPV3)
[AIV3 Sensor Config.] (LFV3)
[AIV3 Sensor Config.] (NPV3)
[AIV3 Sensor Config.] (IPV3)
[AIV3 Sensor Config.] (OOV3)
[AIV3 Sensor Config.] (HIV3)

[Sys Flow] (SLFS) [Installation] (MPVS)

[Est. System Flow Conf] (SLSF)
[Est. System Flow Conf] (SLSF)
[Est. System Flow Conf] (SLSF)
[Sys Electrical Power] (EPRS) [Installation] (MPVS)
[Sys Efficiency Ind] (EFYS) [Installation] (MPVS)
[Sys Energy Cons Ind] (ECIS) [Installation] (MPVS)
[Sys Performance Ind] (EPIS) [Installation] (MPVS)
[Nb of Devices] (MPGN) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)
[M/P Device ID] (MGID) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)
[M/P Speed Mode] (MPST) [Booster Control] (BSC)
[MultiDrive ErrorResp] (MDLB) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)
[M/P Device ErrorResp] (MPDB) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)
[M/P Device Role] (MPDT) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)
[Pump Fixed Freq] (MPFS) [Booster Control] (BSC)
[Settings] (SET)
[Booster S/D Flow Hyst] (BSDH) [Stage/Destage Cond.] (SDCM)
[Settings] (SET)
[LevelCtrl Nb of Pumps] (LCPN) [Level Control] (LCC)
[Max Delivery Height] (LCDK) [Level Control] (LCC)
[Settings] (SET)
[Min Delivery Height] (LCDJ) [Level Control] (LCC)
[Settings] (SET)
[Disturb Flow Comp] (LCQG) [Level Control] (LCC)
[LevelCtrl S/D Interval] (LCDT) [Level Control] (LCC)
[Settings] (SET)
[FDR Error Status] (FDR1) [Fast Device Rep.] (FDRO)
[FDR Operating State] (FDS1) [Fast Device Rep.] (FDRO)
[FDR Action] (FDA1) [Fast Device Rep.] (FDRO)
[Enable FDR] (FDV1) [Fast Device Rep.] (FDRO)

[Est. Pump dP] (SLDP) [Variable Speed Pump] (MPP)

[Est. Pump dP Conf] (SLDP)
[dP/Head Correction] (DPHC)
[Est. Pump dP Conf] (SLDP)
[Est. Pump dP Conf] (SLDP)

# Internal
 [Sys Delta Pressure] (SLDS) [Installation] (MPVS)
[Est. System dP Conf] (SLSD)
[Est. System dP Conf] (SLSD)
[Est. System dP Conf] (SLSD)
[Est. Pump dP Max] (SLDK) [Est. Pump dP Conf] (SLDP)
[Est. Pump dP Conf] (SLDP)
[Est. Pump dP Conf] (SLDP)
[Est. Pump dP Min] (SLDJ) [Est. Pump dP Conf] (SLDP)
[Est. Pump dP Conf] (SLDP)
[Est. Pump dP Conf] (SLDP)
[Booster S/D Interval] (BSDT) [Booster Control] (BSC)
[Settings] (SET)
[Overmodul. Activation] (OVMA) [Motor control] (DRC)
[Level 3rd Pump Stop] (LPL3) [Level settings] (LCL)
[Settings] (SET)
[Booster S/D Control] (BSDM) [Stage/Destage Meth.] (SDMM)
[Boost S Ramp Delay] (BSRD) [Stage/Destage Meth.] (SDMM)
[Settings] (SET)
[Lead Pump Altern.] (MPLA) [System Architecture] (MPQ)
[System Architecture] (MPQ)
[MonitorCircuit B Assign] (IFAB) [Monitoring circuit B] (CMCB)
[Monitoring circuit B] (CMCB)
[MonitorCircuit C Assign] (IFAC) [Monitoring circuit C] (CMCC)
[Monitoring circuit C] (CMCC)
[MonitorCircuit A Assign] (IFAA) [Monitoring circuit A] (CMCA)
[Monitoring circuit A] (CMCA)
[Cab I/O 24V Timeout] (P24D) [Error/Warning handling] (CSWM)
[Cabinet I/O functions] (CABF)
[Password status] (PSST) [Password] (COD)
[Boost S/D Condition] (BSDC) [Stage/Destage Cond.] (SDCM)
[Pump 1 Type] (P1T) [Multipump System] (MPS)
[Mdb NET frames] (M2CT) [Modbus HMI Diag] (MDH)
[Cur Loop Default Gain] (CRBA) [Input Filter] (DCR)
[CabinetCircuit C ErrorResp] (CFRC)[Cabinet circuit C] (CCMC)
[Spd Maint Behavior] (RLS) [Spd Maint Behavior] (RLS)
[ON Lock Time Delay] (LKOD) [ON lock settings] (LKON)
[Update Firmware] (FWAP) [Firmware update] (FWUP)
[CB Error Resp] (CBSR) [Circuit breaker] (CCBK)
[Instance nb] (INXP) [BACnet MS/TP] (BACM)
[Cabinet Overheat Resp] (CHR) [Error/Warning handling] (CSWM)
[Cabinet I/O functions] (CABF)
[DI54 delay] (D54D) [DI54 configuration] (DI54)
[Delay to motor run] (DBS) [Output contactor cmd] (OCC)
[Ctrl Disable DI Assign.] (VCDA) [Vortex Control] (VCTL)
[Level 4th Pump Stop] (LPL4) [Level settings] (LCL)
[Settings] (SET)
[Sys dP Min] (SSDJ) [Est. System dP Conf] (SLSD)
[Est. System dP Conf] (SLSD)
[Est. System dP Conf] (SLSD)
[Level 1st Pump Stop] (LPL1) [Level settings] (LCL)
[Settings] (SET)
[Level 2nd Pump Stop] (LPL2) [Level settings] (LCL)
[Settings] (SET)
[Sys dP Max] (SSDK) [Est. System dP Conf] (SLSD)
[Est. System dP Conf] (SLSD)
[Est. System dP Conf] (SLSD)
[Enable R5 fallback] (R5F) [R5 configuration] (R5)
[Enable AQ2 fallback] (AOF2) [AQ2 configuration] (AO2)
[Download rights] (DLR) [Password] (COD)
[Enable AQ1 fallback] (AOF1) [AQ1 configuration] (AO1)
[Pump 2 Cmd Assign] (MPO2) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)

# Internal
 [Pump 3 Cmd Assign] (MPO3) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)
[Pump 1 Cmd Assign] (MPO1) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)
[Pump 6 Cmd Assign] (MPO6) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)
[Pump 4 Cmd Assign] (MPO4) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)
[Pump 5 Cmd Assign] (MPO5) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)
[Mdb Frame Nb] (M1CT) [Modbus network diag] (MND)
[ETH emb Tx frames] (ETXE) [Ethernet Emb Diag] (MPE)
[Egy Saving Timeout] (IDLT) [Stop and Go] (STG)
[Energy Saving Delay] (IDLM) [Stop and Go] (STG)
[FeedFwd Stage Delay] (FFSD) [Stage/Destage Meth.] (SDMM)
[Settings] (SET)
[System App State] (APSS) [Control] (CTR)
[Application Parameters] (APR)
[Package Type] (PKTP) [Package version] (PFV)
[AI1 range] (AI1L) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI1 configuration] (AI1)
[AI1 sensor config.] (ICA1)
[AI1 Sensor Config.] (OCA1)
[AI1 sensor config.] (IF1)
[AI1 Sensor config.] (PF1)
[AI1 Sensor Config.] (LCS1)
[AI1 Sensor Config.] (BIF1)
[AI1 Configuration] (LCA1)
[AI1 Configuration] (LIF1)
[AI1 Sensor config.] (SIF1)
[AI1 Sensor Config.] (SOA1)
[AI1 Sensor Config.] (WOA1)
[AI1 Sensor Config.] (PFA1)
[AI1 Installation Flow] (FIF1)
[AI1 Configuration] (PPA1)
[AI1 Sensor Config.] (LF1)
[AI1 Sensor config.] (NPF1)
[AI1 sensor config.] (IPA1)
[AI1 Sensor config.] (OOA1)
[AI1 sensor config.] (HIF1)

[Level Switch1 Assign] (LCW1) [Level settings] (LCL)

[Pre-settings Unlock] (PSRT) [Pre-settings] (PRES)
[CabinetCircuit A ErrorResp] (CFRA)[Cabinet circuit A] (CCMA)
[CabinetCircuit B ErrorResp] (CFRB)[Cabinet circuit B] (CCMB)
[Tank Level] (LCTL) [Control] (CTR)
[Application Parameters] (APR)
[Learnt Power #2] (VCP2) [Vortex Control] (VCTL)
[Cur Loop Damp Coef] (CRDR) [Input Filter] (DCR)
[Enable DQ11 fallback] (D11F) [DQ11 Configuration] (DO11)
[Parameters] (PVIS) [Visibility] (VIS)
[Boost Working range] (BCWA) [Stage/Destage Cond.] (SDCM)
[Settings] (SET)
[Pump 5 Runtime] (P5OT) [Multipump System] (MPS)
[Booster Status] (BCS) [Control] (CTR)
[Application Parameters] (APR)
[MonitorCircuit A Monitor] (IFMA) [Monitoring circuit A] (CMCA)
[Monitoring circuit A] (CMCA)
[Pump 1 Runtime] (P1OT) [Multipump System] (MPS)
[Extended Fault Reset] (HRFC) [Fault reset] (RST)
[Ethernet Rate Data] (ARDE) [Ethernet Emb Diag] (MPE)
[Learnt Power #5] (VCP5) [Vortex Control] (VCTL)

# Internal
 [Learnt Power #4] (VCP4) [Vortex Control] (VCTL)
[Learnt Power #1] (VCP1) [Vortex Control] (VCTL)
[Learnt Power #3] (VCP3) [Vortex Control] (VCTL)
[Firmware Update Status] (FWST) [Firmware update diag] (FWUD)
[Learnt Speed #2] (VCS2) [Vortex Control] (VCTL)
[DI58 delay] (D58D) [DI58 configuration] (DI58)
[Pump Flow] (FS2V) [Variable Speed Pump] (MPP)
[Flow estimation] (SFE)
[Error Delay] (VCFD) [Vortex Control] (VCTL)
[Pump Flow Assign.] (FS2A) [Sensors Assignment] (SSC)
[Pump low flow Monit] (PLF)
[Pump Liquid Density] (RHOC) [Pump characteristics] (PCR)
[MultiPump State] (MPS) [Pump Dashboard] (PMT)
[Multipump System] (MPS)
[LevelCtrl Low Speed] (LCLS) [Level Control] (LCC)
[Settings] (SET)
[Pump Ready Delay] (MPID) [System Architecture] (MPQ)
[System Architecture] (MPQ)
[Pump 3 Nb Starts] (P3NS) [Multipump System] (MPS)
[Motor Run Time] (RTHH) [Variable Speed Pump] (MPP)
[Counter Management] (ELT)
[Diag. data] (DDT)
[Dist Lvl Sample Size] (LCNB) [Level Control] (LCC)
[Pump 5 Nb Starts] (P5NS) [Multipump System] (MPS)
[Package Version] (PKVS) [Package version] (PFV)
[Pump 1 Nb Starts] (P1NS) [Multipump System] (MPS)
[Pump 3 Ready Assign] (MPI3) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)
[Pump 4 Ready Assign] (MPI4) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)
[Pump 5 Ready Assign] (MPI5) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)
[Pump 6 Ready Assign] (MPI6) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)
[ETH opt Tx frames] (ETXO) [Ethernet Module Diag] (MTE)
[R60 Active at] (R60S) [R60 configuration] (R60)
[R60 Delay time] (R60D) [R60 configuration] (R60)
[Modbus Ref Freq] (LFR1) [Freq. ref. word map] (RWI)
[CAN Ref Freq] (LFR2) [Freq. ref. word map] (RWI)
[Com Module Ref Freq] (LFR3) [Freq. ref. word map] (RWI)
[Ethernet Embd Ref Freq] (LFR5) [Freq. ref. word map] (RWI)
[Error Behavior] (VCFB) [Vortex Control] (VCTL)
[Pump 2 Nb Starts] (P2NS) [Multipump System] (MPS)
[Booster Stg Speed] (BSS) [Stage/Destage Cond.] (SDCM)
[Settings] (SET)
[Booster Stg Delay] (BSD) [Stage/Destage Cond.] (SDCM)
[Settings] (SET)
[DC Bus Rip Est Freq] (DCRF) [Input Filter] (DCR)
[ETH emb error frames] (EERE) [Ethernet Emb Diag] (MPE)
[Max master address] (MMN) [BACnet MS/TP] (BACM)
[R64 Delay time] (R64D) [R64 configuration] (R64)
[Pump 6 Runtime] (P6OT) [Multipump System] (MPS)
[Pump Cycling Mode] (MPPC) [System Architecture] (MPQ)
[System Architecture] (MPQ)
[Canopen NMT state] (NMTS) [CANopen map] (CNM)

[Pump 2 State] (P2S) [Multipump System] (MPS)

[MotorWinding A Delay] (TFDA) [Motor winding A] (CTIA)
[R61 Active at] (R61S) [R61 configuration] (R61)
[R61 Delay time] (R61D) [R61 configuration] (R61)
[R61 Holding time] (R61H) [R61 configuration] (R61)
[Receive PDO2-4] (RP24) [PDO2 image] (P02)

# Internal
 [Receive PDO2-1] (RP21) [PDO2 image] (P02)
[Receive PDO2-2] (RP22) [PDO2 image] (P02)
[Receive PDO2-3] (RP23) [PDO2 image] (P02)
[MDL Pairing Code] (MDPC) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)

[Command Channel] (CMDC) [Communication map] (CMM)

[CB start pulse activated] (CBEP) [Circuit breaker] (CCBK)
[Enable DQ12 fallback] (D12F) [DQ12 Configuration] (DO12)
[Sys Friction Loss Rate] (LCLF) [Level Control] (LCC)
[MotorWinding B Delay] (TFDB) [Motor winding B] (CTIB)
[MotorBearing A Delay] (TFDC) [Motor bearing A] (CTIC)
[MotorBearing B Delay] (TFDD) [Motor bearing B] (CTID)
[Receive PDO3-2] (RP32) [PDO3 image] (P03)
[Frame Format] (FOR) [BACnet MS/TP] (BACM)
[Access Level] (LAC) [My preferences] (MYP)
[Fallback Channel] (AFFL) [Fieldbus monitoring] (CLL)
[Embedded modbus TCP] (EMTC)
[Communication Module] (COMO)
[CB Switch-on delay] (CBT3) [Circuit breaker] (CCBK)
[CB stop pulse time] (CBT2) [Circuit breaker] (CCBK)
[Prop. Gain] (VCKP) [Vortex Control] (VCTL)
[PI Proportional Gain] (LCKP) [Level Control] (LCC)
[R62 Delay time] (R62D) [R62 configuration] (R62)
[R62 Holding time] (R62H) [R62 configuration] (R62)
[Mdb com stat] (COM1) [Modbus Fieldbus] (MD1)
[Mdb com stat] (COM2) [Modbus HMI] (MD2)
[Pump 3 State] (P3S) [Multipump System] (MPS)
[Pump 3 Type] (P3T) [Multipump System] (MPS)
[Receive PDO3-4] (RP34) [PDO3 image] (P03)
[Receive PDO3-3] (RP33) [PDO3 image] (P03)
[Receive PDO3-1] (RP31) [PDO3 image] (P03)
[CB stop pulse activated] (CBDP) [Circuit breaker] (CCBK)
[RX Error Counter] (REC1) [CANopen map] (CNM)
[R62 Active at] (R62S) [R62 configuration] (R62)
[Primed Condition Delay] (PPFD) [Priming pump ctrl] (PPC)
[Settings] (SET)
[Enable R6 fallback] (R6F) [R6 configuration] (R6)
[AIV3 assignment] (AV3A) [AIV3 assignment] (AV3A)
[Virtual AI3] (AV3)
[R63 Assignment] (R63) [R63 configuration] (R63)
[R62 Assignment] (R62) [R62 configuration] (R62)
[R61 Assignment] (R61) [R61 configuration] (R61)
[R60 Assignment] (R60) [R60 configuration] (R60)
[AIV3 Type] (AV3T) [Virtual AI3] (AV3)
[R66 Assignment] (R66) [R66 configuration] (R66)
[R65 Assignment] (R65) [R65 configuration] (R65)
[R64 Assignment] (R64) [R64 configuration] (R64)
[Integ Cst Time] (VCTI) [Vortex Control] (VCTL)
[Pump 4 Type] (P4T) [Multipump System] (MPS)
[Pump 4 State] (P4S) [Multipump System] (MPS)
[Boost Override range] (BCOA) [Stage/Destage Cond.] (SDCM)
[Settings] (SET)
[TX Error Counter] (TEC1) [CANopen map] (CNM)
[iPar Autosave Timer] (IPAT) [Profinet] (PNC)
[iPar Activation] (IPAV) [Profinet] (PNC)
[iPar Autosave Act] (IPAS) [Profinet] (PNC)
[Pump 1 Ready Assign] (MPI1) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)
[Pump 2 Ready Assign] (MPI2) [Pumps Configuration] (PUMP)
[Pumps Configuration] (PUMP)

# Internal
 [R63 Active at] (R63S) [R63 configuration] (R63)
[R63 Holding time] (R63H) [R63 configuration] (R63)
[R63 Delay time] (R63D) [R63 configuration] (R63)
[Display Terminal locked] (KLCK) [LCD settings] (CNL)

[ON Lock Response] (LKOR) [ON lock settings] (LKON)

[Transmit PDO2-1] (TP21) [PDO2 image] (P02)
[Mb NET CRC errors] (M1EC) [Modbus network diag] (MND)
[AIV2 assignment] (AV2A) [AIV2 assignment] (AV2A)
[Virtual AI2] (AV2)
[Full Tank Level] (LCTK) [Level Control] (LCC)
[Empty Tank Level] (LCTJ) [Level Control] (LCC)
[PI Integ Cst Time] (LCTI) [Level Control] (LCC)
[Tank Volume] (LCTV) [Level Control] (LCC)
[AIV2 Type] (AV2T) [Virtual AI2] (AV2)
[Level 5th Pump Stop] (LPL5) [Level settings] (LCL)
[Settings] (SET)
[Level 6th Pump Stop] (LPL6) [Level settings] (LCL)
[Settings] (SET)
[Output Voltage Limit] (VLIM) [Motor control] (DRC)
[Level Switch2 Assign] (LCW2) [Level settings] (LCL)
[Wake Up Delay] (WUPD) [Wake up menu] (WKP)
[Pump Op Point Filter] (WPXF) [Est. Pump Flow Conf] (SLPF)
[Est. Pump dP Conf] (SLDP)
[Pump characteristics] (PCR)
[dP/Head Correction] (DPHC)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump dP Conf] (SLDP)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump dP Conf] (SLDP)
[Settings] (SET)
[Flow estimation] (SFE)
[Stage/Destage Cond.] (SDCM)

[R64 Active at] (R64S) [R64 configuration] (R64)

[R64 Holding time] (R64H) [R64 configuration] (R64)
[CabinetCircuit C Delay] (CFDC) [Cabinet circuit C] (CCMC)
[CabinetCircuit B Delay] (CFDB) [Cabinet circuit B] (CCMB)
[CabinetCircuit A Delay] (CFDA) [Cabinet circuit A] (CCMA)
[Pump 4 Nb Starts] (P4NS) [Multipump System] (MPS)
[Pump 5 Type] (P5T) [Multipump System] (MPS)
[Lead Pump] (PLID) [Multipump System] (MPS)
[DI53 delay] (D53D) [DI53 configuration] (DI53)
[Max info frames] (MIF) [BACnet MS/TP] (BACM)
[IP Mode Ether. Embd] (IM00) [Embd Eth Config] (ETE)
[CB start pulse time] (CBT1) [Circuit breaker] (CCBK)
[CB Disable stop delay] (CBT5) [Circuit breaker] (CCBK)
[CB Switch-off delay] (CBT4) [Circuit breaker] (CCBK)
[Receive PDO1-4] (RP14) [PDO1 image] (P01)
[Receive PDO1-1] (RP11) [PDO1 image] (P01)
[Receive PDO1-3] (RP13) [PDO1 image] (P01)
[Receive PDO1-2] (RP12) [PDO1 image] (P01)
[Dual Cmd Channel 2] (SCD2) [Command and Reference] (CRP)
[Dual Cmd Channel 1] (SCD1) [Command and Reference] (CRP)
[Active Master ID] (MMID) [Multipump System] (MPS)
[IP mode] (IPM) [Profinet] (PNC)
[Level Switch4 Assign] (LCW4) [Level settings] (LCL)
[Pump 5 State] (P5S) [Multipump System] (MPS)
[LvlCtrl Random Factor] (LCRX) [Level Control] (LCC)
[Settings] (SET)
[ON Lock Assignment] (LKOS) [ON lock settings] (LKON)
[Enable R4 fallback] (R4F) [R4 configuration] (R4)
[DI56 delay] (D56D) [DI56 configuration] (DI56)

# Internal
 [Level Switch3 Assign] (LCW3) [Level settings] (LCL)
[CabinetCircuit C Assign] (CFAC) [Cabinet circuit C] (CCMC)
[Level Switch6 Assign] (LCW6) [Level settings] (LCL)
[Level Switch5 Assign] (LCW5) [Level settings] (LCL)
[MultiPump ErrorResp] (MPFB) [System Architecture] (MPQ)
[System Architecture] (MPQ)
[AI Loss Inhibition] (INLF) [4-20 mA loss] (LFL)
[Fieldbus Timeout] (TLP) [BACnet MS/TP] (BACM)
[Rx frame count] (TFCR) [BACnet MS/TP] (BACM)
[Tx frame count] (TFCT) [BACnet MS/TP] (BACM)
[Max Lvl Switch Assign] (LCWH) [Level Control] (LCC)
[Min Lvl Switch Assign] (LCWL) [Level Control] (LCC)
[AIV1 assignment] (AV1A) [AIV1 assignment] (AV1A)
[Virtual AI1] (AV1)
[AIV1 Type] (AV1T) [Virtual AI1] (AV1)
[FeedFwd Disturb Time] (FFTG) [Stage/Destage Meth.] (SDMM)
[Settings] (SET)
[Pump 6 State] (P6S) [Multipump System] (MPS)
[Pump 4 Runtime] (P4OT) [Multipump System] (MPS)
[R60 Holding time] (R60H) [R60 configuration] (R60)
[Number of RX PDO] (NBRP) [CANopen map] (CNM)
[R65 Active at] (R65S) [R65 configuration] (R65)
[R65 Holding time] (R65H) [R65 configuration] (R65)
[R65 Delay time] (R65D) [R65 configuration] (R65)
[ETH Option IP Mode] (IM10) [Eth Module Config] (ETO)
[Level 4th Pump Start] (LRL4) [Level settings] (LCL)
[Settings] (SET)
[Level 5th Pump Start] (LRL5) [Level settings] (LCL)
[Settings] (SET)
[Level 2nd Pump Start] (LRL2) [Level settings] (LCL)
[Settings] (SET)
[Level 1st Pump Start] (LRL1) [Level settings] (LCL)
[Settings] (SET)
[Primed Switch Assign] (PPWA) [Priming pump ctrl] (PPC)
[MotorBearing A ErrorResp] (TFRC) [Motor bearing A] (CTIC)
[MotorBearing B ErrorResp] (TFRD) [Motor bearing B] (CTID)
[DI52 delay] (D52D) [DI52 configuration] (DI52)
[Number of TX PDO] (NBTP) [CANopen map] (CNM)
[ETH opt Rx frames] (ERXO) [Ethernet Module Diag] (MTE)
[Nb of Staged Pumps] (MPSN) [Pump Dashboard] (PMT)
[Multipump System] (MPS)
[Pump 1 State] (P1S) [Multipump System] (MPS)
[ETH emb Rx frames] (ERXE) [Ethernet Emb Diag] (MPE)
[Boost D bypass Spd] (BDBS) [Stage/Destage Meth.] (SDMM)
[Settings] (SET)
[Boost D bypass Time] (BDBT) [Stage/Destage Meth.] (SDMM)
[Settings] (SET)
[Pump 6 Type] (P6T) [Multipump System] (MPS)
[Flow Stabilization Thd] (LCDF) [Level Control] (LCC)
[Booster Nb Of Pumps] (BCPN) [Booster Control] (BSC)
[Primed Inlet Level] (PPIL) [Priming pump ctrl] (PPC)
[Settings] (SET)
[Nb Of Pumps] (MPPN) [System Architecture] (MPQ)
[System Architecture] (MPQ)
[Output contact fdbk] (RCA) [Output contactor cmd] (OCC)
[InPres DI Assign] (IPPW) [Inlet pressure monitoring] (IPP)
[InPresError Delay] (IPPD) [Inlet pressure monitoring] (IPP)
[Available Pumps] (MPAN) [Pump Dashboard] (PMT)
[Multipump System] (MPS)
[Transmit PDO1-3] (TP13) [PDO1 image] (P01)
[Transmit PDO1-2] (TP12) [PDO1 image] (P01)
[Transmit PDO1-1] (TP11) [PDO1 image] (P01)

# Internal
 [Transmit PDO1-4] (TP14) [PDO1 image] (P01)
[R66 Delay time] (R66D) [R66 configuration] (R66)
[R66 Holding time] (R66H) [R66 configuration] (R66)
[R66 Active at] (R66S) [R66 configuration] (R66)
[MonitorCircuit D Assign] (IFAD) [Monitoring circuit D] (CMCD)
[Monitoring circuit D] (CMCD)
[DI51 delay] (D51D) [DI51 configuration] (DI51)
[Sys Flow Min] (SSFJ) [Est. System Flow Conf] (SLSF)
[Est. System Flow Conf] (SLSF)
[Est. System Flow Conf] (SLSF)
[Sys Flow Max] (SSFK) [Est. System Flow Conf] (SLSF)
[Est. System Flow Conf] (SLSF)
[Est. System Flow Conf] (SLSF)
[Activation] (VCM) [Vortex Control] (VCTL)
[oRSTP Config] (ST1C) [RSTP configuration] (RSTO)
[oRSTP Actual Config] (ST1A) [RSTP configuration] (RSTO)
[Pump 2 Runtime] (P2OT) [Multipump System] (MPS)
[ETH opt error frames] (EERO) [Ethernet Module Diag] (MTE)
[oRSTP Modif Status] (ST1V) [RSTP configuration] (RSTO)
[oRSTP Status] (ST1S) [RSTP configuration] (RSTO)
[FeedFwd Destage Delay] (FFDD) [Stage/Destage Meth.] (SDMM)
[Settings] (SET)
[Enable R2 fallback] (R2F) [R2 configuration] (R2)
[LevelCtrl Sensor Type] (LCNT) [Level Control] (LCC)
[Braking Current Level] (BDCL) [Ramp] (RAMP)
[MotorWinding A Assign] (TFAA) [Motor winding A] (CTIA)
[MotorBearing A Assign] (TFAC) [Motor bearing A] (CTIC)
[MotorWinding B Assign] (TFAB) [Motor winding B] (CTIB)
[MotorBearing B Assign] (TFAD) [Motor bearing B] (CTID)
[AFE Power-On Time] (BPHH) [Counter Management] (ELT)
[Disturb Filter Time] (LCQF) [Level Control] (LCC)
[Disturb Flow resp time] (LCQT) [Level Control] (LCC)
[Settings] (SET)
[Plate Nom Motor Tq] (TQNP) [data] (MTD)
[Expert Motor Tq] (TQNO) [data] (MTD)
[Transmit PDO2-4] (TP24) [PDO2 image] (P02)
[Transmit PDO2-2] (TP22) [PDO2 image] (P02)
[Transmit PDO2-3] (TP23) [PDO2 image] (P02)
[Nom Motor Tq Scaling] (TQNC) [data] (MTD)
[Red Backlight] (BCKL) [LCD settings] (CNL)

# Internal
 [AI4 range] (AI4L) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI4 configuration] (AI4)
[AI4 sensor config.] (ICA4)
[AI4 Sensor Config.] (OCA4)
[AI4 sensor config.] (IF4)
[AI4 Sensor config.] (PF4)
[AI4 Sensor Config.] (LCS4)
[AI4 Sensor Config.] (BIF4)
[AI4 Configuration] (LCA4)
[AI4 Configuration] (LIF4)
[AI4 Sensor config.] (SIF4)
[AI4 Sensor Config.] (SOA4)
[AI4 Sensor Config.] (WOA4)
[AI4 Sensor Config.] (PFA4)
[AI4 Installation Flow] (FIF4)
[AI4 Configuration] (PPA4)
[AI4 Sensor Config.] (LF4)
[AI4 Sensor config.] (NPF4)
[AI4 sensor config.] (IPA4)
[AI4 Sensor config.] (OOA4)
[AI4 sensor config.] (HIF4)

[FeedFwd Disturb Gain] (FFG) [Stage/Destage Meth.] (SDMM)

[Settings] (SET)
[CabinetCircuit A Assign] (CFAA) [Cabinet circuit A] (CCMA)
[CabinetCircuit B Assign] (CFAB) [Cabinet circuit B] (CCMB)
[Firmware Update Error] (FWER) [Firmware update diag] (FWUD)
[Booster Dstg Spd] (BDS) [Stage/Destage Cond.] (SDCM)
[Settings] (SET)
[MonitorCircuit A ErrorResp] (IFRA) [Monitoring circuit A] (CMCA)
[Monitoring circuit A] (CMCA)
[Pump 6 Nb Starts] (P6NS) [Multipump System] (MPS)
[Boost D Ramp Delay] (BDRD) [Stage/Destage Meth.] (SDMM)
[Settings] (SET)
[Display value type] (MDT) [Display screen type] (MSC)
[DI50 delay] (D50D) [DI50 configuration] (DI50)
[LevelCtrl Stop Mode] (LCPM) [Level Control] (LCC)
[Real Tank Level] (LCFV) [Application Parameters] (APR)
[Master Enable Assign] (MPME) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)
[DC Bus Rip Amp Val] (DCRA) [Input Filter] (DCR)
[MonitorCircuit D Delay] (IFDD) [Monitoring circuit D] (CMCD)
[Monitoring circuit D] (CMCD)
[MonitorCircuit A Delay] (IFDA) [Monitoring circuit A] (CMCA)
[Monitoring circuit A] (CMCA)
[MonitorCircuit C Delay] (IFDC) [Monitoring circuit C] (CMCC)
[Monitoring circuit C] (CMCC)
[MonitorCircuit B Delay] (IFDB) [Monitoring circuit B] (CMCB)
[Monitoring circuit B] (CMCB)
[Enable R3 fallback] (R3F) [R3 configuration] (R3)
[Transmit PDO3-1] (TP31) [PDO3 image] (P03)
[Transmit PDO3-3] (TP33) [PDO3 image] (P03)
[Transmit PDO3-2] (TP32) [PDO3 image] (P03)
[Transmit PDO3-4] (TP34) [PDO3 image] (P03)
[MonitorCircuit D ErrorResp] (IFRD) [Monitoring circuit D] (CMCD)
[Monitoring circuit D] (CMCD)
[Input Filter] (IFI) [Input Filter] (DCR)

# Internal
 [AI5 range] (AI5L) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI5 configuration] (AI5)
[AI5 sensor config.] (ICA5)
[AI5 Sensor Config.] (OCA5)
[AI5 sensor config.] (IF5)
[AI5 Sensor config.] (PF5)
[AI5 Sensor Config.] (LCS5)
[AI5 Sensor Config.] (BIF5)
[AI5 Configuration] (LCA5)
[AI5 Configuration] (LIF5)
[AI5 Sensor config.] (SIF5)
[AI5 Sensor Config.] (SOA5)
[AI5 Sensor Config.] (WOA5)
[AI5 Sensor Config.] (PFA5)
[AI5 Installation Flow] (FIF5)
[AI5 Configuration] (PPA5)
[AI5 Sensor Config.] (LF5)
[AI5 Sensor config.] (NPF5)
[AI5 sensor config.] (IPA5)
[AI5 Sensor config.] (OOA5)
[AI5 sensor config.] (HIF5)

[Level 4th Pump HSP] (LHL4) [Level settings] (LCL)

[Settings] (SET)
[Level 5th Pump HSP] (LHL5) [Level settings] (LCL)
[Settings] (SET)
[Level 6th Pump HSP] (LHL6) [Level settings] (LCL)
[Settings] (SET)
[Level 1st Pump HSP] (LHL1) [Level settings] (LCL)
[Settings] (SET)
[Level 2nd Pump HSP] (LHL2) [Level settings] (LCL)
[Settings] (SET)
[Level 3rd Pump Start] (LRL3) [Level settings] (LCL)
[Settings] (SET)
[AFE Run Time] (BRHH) [Counter Management] (ELT)
[DI57 delay] (D57D) [DI57 configuration] (DI57)
[Status] (VCCS) [Vortex Control] (VCTL)
[Config. Source] (FCSI) [Factory settings] (FCS)
[LevelCtrl Error Resp] (LCFB) [Level Control] (LCC)
[Ref Freq Channel] (RFCC) [Communication map] (CMM)
[Learnt Speed #4] (VCS4) [Vortex Control] (VCTL)
[Est. Pump Flow Max] (SLFK) [Est. Pump Flow Conf] (SLPF)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump Flow Min] (SLFJ) [Est. Pump Flow Conf] (SLPF)
[Est. Pump Flow Conf] (SLPF)
[Est. Pump Flow Conf] (SLPF)
[Learnt Speed #1] (VCS1) [Vortex Control] (VCTL)
[Power-on time] (PTHH) [Counter Management] (ELT)
[Boost S Bypass Time] (BSBT) [Stage/Destage Meth.] (SDMM)
[Settings] (SET)
[MotorWinding A ErrorResp] (TFRA) [Motor winding A] (CTIA)
[MotorBearing B Monitor] (TFMD) [Motor bearing B] (CTID)
[MotorWinding A Monitor] (TFMA) [Motor winding A] (CTIA)
[MotorWinding B ErrorResp] (TFRB) [Motor winding B] (CTIB)
[MotorBearing A Monitor] (TFMC) [Motor bearing A] (CTIC)
[MotorWinding B Monitor] (TFMB) [Motor winding B] (CTIB)
[MonitorCircuit B Monitor] (IFMB) [Monitoring circuit B] (CMCB)
[Monitoring circuit B] (CMCB)
[MonitorCircuit C Monitor] (IFMC) [Monitoring circuit C] (CMCC)
[Monitoring circuit C] (CMCC)
[iPar Status] (IPAE) [PROFINET DIAG] (PRN)

# Internal
 [iPar Error Response] (IPAF) [Profinet] (PNC)
[MonitorCircuit D Monitor] (IFMD) [Monitoring circuit D] (CMCD)
[Monitoring circuit D] (CMCD)
[PwrOn Master Delay] (MPPD) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)
[Level Sensor Value] (LCSV) [Application Parameters] (APR)
[LevelCtrl Strategy] (LCST) [Level Control] (LCC)
[Level Sensor Assign] (LCSA) [Sensors Assignment] (SSC)
[Level Control] (LCC)
[AI2 range] (AI2L) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI2 configuration] (AI2)
[AI2 sensor config.] (ICA2)
[AI2 Sensor Config.] (OCA2)
[AI2 sensor config.] (IF2)
[AI2 Sensor config.] (PF2)
[AI2 Sensor Config.] (LCS2)
[AI2 Sensor Config.] (BIF2)
[AI2 Configuration] (LCA2)
[AI2 Configuration] (LIF2)
[AI2 Sensor config.] (SIF2)
[AI2 Sensor Config.] (SOA2)
[AI2 Sensor Config.] (WOA2)
[AI2 Sensor Config.] (PFA2)
[AI2 Installation Flow] (FIF2)
[AI2 Configuration] (PPA2)
[AI2 Sensor Config.] (LF2)
[AI2 Sensor config.] (NPF2)
[AI2 sensor config.] (IPA2)
[AI2 Sensor config.] (OOA2)
[AI2 sensor config.] (HIF2)

[Cur Loop Config Gain] (CRB) [Input Filter] (DCR)

[Incorrect frame count] (EFC) [BACnet MS/TP] (BACM)
[LevelCtrl Status] (LCS) [Control] (CTR)
[Application Parameters] (APR)
[Mdb NET CRC errors] (M2EC) [Modbus HMI Diag] (MDH)
[LevelCtrl Mode] (LCM) [Level Control] (LCC)
[Next Destaged Pump] (PNTD) [Multipump System] (MPS)
[Next Staged Pump] (PNTS) [Multipump System] (MPS)
[Save Configuration] (SCSI) [Factory settings] (FCS)
[DC Bus Ripple Config] (DCRC) [Input Filter] (DCR)
[Curve Learn Mode] (VCLM) [Vortex Control] (VCTL)
[Learning Act. Assign] (VCLA) [Vortex Control] (VCTL)
[Abort Firmware Update] (FWCL) [Firmware update] (FWUP)
[DC Bus Rip Counter] (DCRD) [Input Filter] (DCR)
[Curve Learn Status] (VCLS) [Vortex Control] (VCTL)
[Pwr/Spd Curve Gain] (VCAX) [Vortex Control] (VCTL)
[RCI Round Nb] (RCRP) [Motor tune] (MTU)
[DI59 delay] (D59D) [DI59 configuration] (DI59)
[Reset Eth Opt Pwd] (RWPO) [User authentication] (SECO)
[Webserver] (WBS)
[Reset Eth Embd Pwd] (RWPE) [User authentication] (SECE)
[Webserver] (WBS)
[CabinetCircuit A Monitor] (CFMA) [Cabinet circuit A] (CCMA)
[CabinetCircuit B Monitor] (CFMB) [Cabinet circuit B] (CCMB)
[CabinetCircuit C Monitor] (CFMC) [Cabinet circuit C] (CCMC)
[Pump 3 Runtime] (P3OT) [Multipump System] (MPS)
[Pump System Archi] (MPSA) [System Architecture] (MPQ)
[System Architecture] (MPQ)
[Booster Control] (BCM) [Booster Control] (BSC)
[Pump Auto Cycling] (MPCP) [System Architecture] (MPQ)
[System Architecture] (MPQ)

# Internal
 [DC injection angle] (TAFI) [Mot. ctrl hidden menu] (MCW)
[iPar Local Conf] (ICFG) [Profinet] (PNC)
[Booster Dstg Delay] (BDD) [Stage/Destage Cond.] (SDCM)
[Settings] (SET)
[Booster Dstg Flow] (BDF) [Stage/Destage Cond.] (SDCM)
[Settings] (SET)
[Booster Stg Bypass Spd] (BSBS) [Stage/Destage Meth.] (SDMM)
[Settings] (SET)
[Master Act Delay] (MPMD) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)
[Master Active Assign] (MPMA) [Multidrive Config] (MPVC)
[Multidrive Config] (MPVC)
[Vol Meas Filter Time] (LCVF) [Level Control] (LCC)
[Learning Stab. Time] (VCST) [Vortex Control] (VCTL)
[MonitorCircuit C ErrorResp] (IFRC) [Monitoring circuit C] (CMCC)
[Monitoring circuit C] (CMCC)
[MonitorCircuit B ErrorResp] (IFRB) [Monitoring circuit B] (CMCB)
[Monitoring circuit B] (CMCB)
[Out. Contactor Assign] (OCC) [Output contactor cmd] (OCC)
[Low Learning speed] (VCSJ) [Vortex Control] (VCTL)
[High Learning speed] (VCSK) [Vortex Control] (VCTL)
[Learnt Speed #5] (VCS5) [Vortex Control] (VCTL)
[Learnt Speed #3] (VCS3) [Vortex Control] (VCTL)
[AI3 range] (AI3L) [PID Feedback] (FDB)
[PID Feedback] (FDB)
[PID Feedback] (FDB)
[AI3 configuration] (AI3)
[AI3 sensor config.] (ICA3)
[AI3 Sensor Config.] (OCA3)
[AI3 sensor config.] (IF3)
[AI3 Sensor config.] (PF3)
[AI3 Sensor Config.] (LCS3)
[AI3 Sensor Config.] (BIF3)
[AI3 Configuration] (LCA3)
[AI3 Configuration] (LIF3)
[AI3 Sensor config.] (SIF3)
[AI3 Sensor Config.] (SOA3)
[AI3 Sensor Config.] (WOA3)
[AI3 Sensor Config.] (PFA3)
[AI3 Installation Flow] (FIF3)
[AI3 Configuration] (PPA3)
[AI3 Sensor Config.] (LF3)
[AI3 Sensor config.] (NPF3)
[AI3 sensor config.] (IPA3)
[AI3 Sensor config.] (OOA3)
[AI3 sensor config.] (HIF3)

[Enable R1 fallback] (R1F) [R1 configuration] (R1)

[Pump 2 Type] (P2T) [Multipump System] (MPS)
[DI55 delay] (D55D) [DI55 configuration] (DI55)
[Pwr/Spd Curve Offset] (VCAY) [Vortex Control] (VCTL)
[Delay to open cont.] (DAS) [Output contactor cmd] (OCC)
[Level 6th Pump Start] (LRL6) [Level settings] (LCL)
[Settings] (SET)
[Upload rights] (ULR) [Password] (COD)
[Level 3rd Pump HSP] (LHL3) [Level settings] (LCL)
[Settings] (SET)
[Rotational Torque Current] (RTC) [Motor tune] (MTU)

# Internal
List ID Value Display
ACT 0 [Not Done] (TAB)
1 [Pending] (PEND)
2 [In Progress] (PROG)
3 [Error] (FAIL)
4 [Autotuning Done] (DONE)
ACTION 0 [No Action] (NO)
1 [Apply Autotuning] (YES)
2 [Erase Autotuning] (CLR)
ADC 0 [No] (NO)
1 [Yes] (YES)
2 [Continuous] (CT)
AFFL 0 [Not Active] (NO)
1 [Fallback To CH1] (CH1)
2 [Fallback To CH2] (CH2)
3 [NoStop Fallback CH1] (BMP1)
4 [NoStop Fallback CH2] (BMP2)
AIOL 0 [0 - 100%] (POS)
1 [+/- 100%] (POSNEG)
AIOT 1 [Voltage] (10U)
2 [Current] (0A)
5 [Voltage +/-] (N10U)
7 [PTC] (PTC)
8 [KTY] (KTY)
9 [PT1000] (1PT3)
10 [PT100] (1PT2)
11 [Water Prob] (LEVEL)
12 [3 PT1000] (3PT3)
13 [3 PT100] (3PT2)
14 [PT1000 in 3 wires] (1PT33)
15 [PT100 in 3 wires] (1PT23)
16 [3 PT1000 in 3 wires] (3PT33)
17 [3 PT100 in 3 wires] (3PT23)
ALR 0 [No Warning stored] (NOA)
1 [Fallback Frequency] (FRF)
2 [Speed Maintained] (RLS)
3 [Type of stop] (STT)
4 [Ref Frequency Warning] (SRA)
5 [Life Cycle Warn 1] (LCA1)
6 [Life Cycle Warn 2] (LCA2)
7 [Dry Run Warning] (DRYA)
8 [Low Flow Warning] (LFA)
9 [High Flow Warning] (HFPA)
10 [InPress Warning] (IPPA)
11 [Low OutPres Warn] (OPLA)
12 [High OutPres Warn] (OPHA)
13 [PumpCycle warning] (PCPA)
14 [Anti-Jam Warning] (JAMA)
15 [Pump Low Flow] (PLFA)
16 [LowPres Warning] (LPA)
17 [Flow Limit activated] (FSA)
18 [PID error Warning] (PEE)
19 [PID Feedback Warn] (PFA)
20 [PID High Fdbck Warn] (PFAH)
21 [PID Low Fdbck Warn] (PFAL)
22 [Regulation Warning] (PISH)
26 [AI2 Th Warning] (TP2A)
27 [AI3 Th Warning] (TP3A)
28 [AI4 Th Warning] (TP4A)
29 [AI5 Th Warning] (TP5A)
30 [AI1 4-20 Warning] (AP1)

# Internal
31 [AI2 4-20 Warning] (AP2)
32 [AI3 4-20 Warning] (AP3)
33 [AI4 4-20 Warning] (AP4)
34 [AI5 4-20 Warning] (AP5)
35 [Device Therm Warn] (THA)
36 [IGBT Thermal Warning] (TJA)
37 [Fan Counter Warning] (FCTA)
38 [Fan Feedback Warning] (FFDA)
40 [Ext. Error Warning] (EFA)
41 [Undervoltage Warning] (USA)
42 [Preventive UnderV Active] (UPA)
43 [Forced Run] (ERN)
44 [Mot Freq High Thd] (FTA)
45 [Mot Freq Low Thd] (FTAL)
47 [Mot Freq Low Thd 2] (F2AL)
48 [High Speed Reached] (FLA)
49 [Ref Freq High Thd reached] (RTAH)
50 [Ref Freq Low Thd reached] (RTAL)
51 [2nd Freq Thd Reached] (F2A)
52 [Current Thd Reached] (CTA)
53 [Low Current Reached] (CTAL)
54 [High Torque Warning] (TTHA)
55 [Low Torque Warning] (TTLA)
56 [Process Undld Warning] (ULA)
57 [Process Overload Warning] (OLA)
60 [Dev Thermal reached] (TAD)
61 [Motor Therm Thd reached] (TSA)
65 [Power High Threshold] (PTHA)
66 [Power Low Threshold] (PTHL)
67 [Cust Warning 1] (CAS1)
68 [Cust Warning 2] (CAS2)
69 [Cust Warning 3] (CAS3)
70 [Cust Warning 4] (CAS4)
71 [Cust Warning 5] (CAS5)
72 [AFE Mains Undervoltage] (URA)
73 [Power Cons Warning] (POWD)
74 [Switch OutPres Warn] (OPSA)
75 [Ethernet Internal Warning] (INWM)
78 [MP Capacity Warn] (MPCA)
79 [Lead Pump Warn] (MPLA)
80 [High Level Warning] (LCHA)
81 [Low Level Warning] (LCLA)
82 [Level Switch Warning] (LCWA)
97 [MonitorCircuit A Warn] (IWA)
98 [MonitorCircuit B Warn] (IWB)
99 [MonitorCircuit C Warn] (IWC)
100 [MonitorCircuit D Warn] (IWD)
101 [CabinetCircuit A Warn] (CWA)
102 [CabinetCircuit B Warn] (CWB)
103 [CabinetCircuit C Warn] (CWC)
104 [MotorWinding A Warn] (TWA)
105 [MotorWinding B Warn] (TWB)
106 [MotorBearing A Warn] (TWC)
107 [MotorBearing B Warn] (TWD)
108 [Circuit Breaker Warn] (CBW)
109 [Cab I/O 24V Warn] (P24C)
110 [Fallback Channel] (AFFL)
113 [AFE Motor Limitation] (CLIM)
114 [AFE Generator Limitation] (CLIG)
115 [AFE Sensor thermal state] (THSA)
116 [AFE IGBT thermal state] (THJA)

# Internal
 117 [Cabinet Fan Fdbck Warn] (FFCA)
118 [Cabinet Fan Counter Warn] (FCCA)
119 [Cabinet Overheat Warn] (CHA)
120 [CMI Jumper Warn] (CMIJ)
121 [AFE Fan Counter Warn] (FCBA)
122 [AFE Fan Fdbck Warn] (FFBA)
124 [M/P Device Warn] (MPDA)
134 [Temp Sens AI2 Warn] (TS2A)
135 [Temp Sens AI3 Warn] (TS3A)
136 [Temp Sens AI4 Warn] (TS4A)
137 [Temp Sens AI5 Warn] (TS5A)
138 [DC Bus Ripple Warn] (DCRW)
139 [VxCtrl Warning] (VCA)
140 [Cooling Pump Warn] (COPA)
142 [Module Overheat] (MOA)
143 [ON Lock Warning] (LKON)
145 [Internal Error 22] (INFM)
146 [Modbus Com Inter.] (SLF1)
APPS 0 [Running] (RUN)
1 [Stop] (STOP)
2 [Local Mode Active] (LOCAL)
3 [Channel 2 Active] (OVER)
4 [Manual Mode Active] (MANU)
5 [PID Active] (AUTO)
6 [Anti-Jam In progress] (AJAM)
7 [Flow limit In progress] (FLIM)
8 [PipeFill In progress] (FILL)
9 [Jockey Pump Active] (JOCKEY)
10 [Boost In progress] (BOOST)
11 [Sleep Active] (SLEEP)
12 [Priming Pump Active] (PRIM)
13 [InletPres Comp Active] (COMP)
15 [Undefined] (UNDEF)
16 [VxCtrl Learning] (VLEARN)
17 [VxCtrl Active] (VCTRL)
APPT 0 [Generic Pump Control] (GPMP)
1 [Pump Level Control] (LEVEL)
2 [Pump Booster Control] (BOOST)
3 [Generic Fan Control] (FAN)
AST 5 [PSI align.] (PSI)
6 [PSIO align.] (PSIO)
7 [Rotational Current Injection] (RCI)
254 [No align.] (NO)
AUT 0 [No] (NO)
1 [Yes] (YES)
AVOT 0 [+/- 8192] (INEG)
1 [+/- 100%] (PNEG)
BCS 0 [None] (NONE)
1 [Inactive] (NACT)
2 [Running] (RUN)
3 [Stage Pending] (STGP)
4 [Destage pending] (DSTGP)
5 [Staging] (STG)
6 [Destaging] (DSTG)
BDCO 38 [50 kbps] (50K)
52 [125 kbps] (125K)
60 [250 kbps] (250K)
68 [500 kbps] (500K)
76 [1 Mbps] (1M)
BFR 0 [50 Hz] (50Hz)
1 [60 Hz] (60Hz)

# Internal
BMP 0 [Stop On Switching] (STOP)
1 [Bumpless] (BUMP)
2 [Disabled] (DIS)
BOA 0 [Inactive] (NO)
1 [Dynamic] (DYNA)
2 [Static] (STAT)
3 [Constant] (CSTE)
BRA 0 [No] (NO)
1 [Yes] (YES)
2 [High Torque] (DYNA)
BSDC 0 [Speed] (SPD)
1 [Feedback] (FBK)
2 [Speed+Flow] (SPFL)
3 [Feedback+Flow] (FBFL)
5 [Energy Optimized] (OPT)
BSDM 0 [Speed] (BSPD)
1 [Feedback] (BFBK)
2 [Advanced] (ADVC)
BSP 0 [Standard] (BSD)
1 [Pedestal] (BLS)
2 [Deadband] (BNS)
4 [Deadband at 0%] (BNS0)
CAR 0 [No Warning Clearing] (NO)
1 [Clear Event 1 Warning] (RA1)
2 [Clear Event 2 Warning] (RA2)
3 [Clear Event 3 Warning] (RA3)
4 [Clear Event 4 Warning] (RA4)
5 [Clear Event 5 Warning] (RA5)
CBS 0 [CB Not Configured] (NO)
1 [CB Invalid Config] (CBCI)
2 [CB In Start Pulse] (CBST)
3 [CB Not Closed] (CBNC)
4 [CB Open] (CBOS)
5 [CB In Stop Pulse] (CBSP)
6 [CB Not Open] (CBNO)
7 [CB Closed] (CBCS)
8 [CB stop disable] (CBSD)
CBSR 0 [Error] (FLT)
1 [Warning] (WAR)
CCA 0 [Not Configured] (NO)
1 [Counter] (CPT)
2 [Date and Time] (DT)
CCS 0 [Mains/Control ON] (0)
1 [Mains Supply ON] (1)
2 [Drive is Running] (2)
CDX 1 [Terminals] (TER)
3 [HMI] (LCC)
10 [Modbus] (MDB)
20 [CANopen] (CAN)
30 [Com. Module] (NET)
40 [Ethernet] (ETH)
CFPS 0 [None] (NO)
1 [Set No.1] (CFP1)
2 [Set No.2] (CFP2)
3 [Set No.3] (CFP3)
CHCF 1 [Not separ.] (SIM)
2 [Separate] (SEP)
3 [I/O profile] (IO)
CHR 0 [No] (NO)
1 [Warning] (ALRM)
2 [Error] (FLT)

# Internal
 3 [Warning Then Error] (ALFLT)
CINR 20 [0.001] (0001)
30 [0.01] (001)
40 [0.1] (01)
50 [1] (1)
60 [10] (10)
CIOA 0 [20/70] (20)
1 [21/71] (21)
2 [100/101] (100)
3 [Unconfig.] (UNCG)
CMDT 0 [Parameters List] (NO)
1 [PID Feedback] (PFT)
2 [Outlet Pressure] (OPT)
3 [Inlet Pressure] (IPT)
4 [Installation Flow] (IFT)
CNFS 0 [In progress] (NO)
1 [Config. No.0] (CNF0)
CNL 0 [Terminals] (TER)
2 [HMI] (LCC)
3 [Modbus] (MDB)
5 [Terminals+HMI Panel] (MIX)
6 [CANopen] (CAN)
9 [Com. Module] (NET)
11 [Ethernet Module] (ETH)
15 [PC tool] (PWS)
COFM 0 [Measured] (HWCOF)
1 [Computed] (SWCOF)
COM1 0 [R0T0] (R0T0)
1 [R0T1] (R0T1)
2 [R1T0] (R1T0)
3 [R1T1] (R1T1)
COP 0 [No] (NO)
1 [Reference Frequency] (SP)
2 [Command] (CD)
3 [Cmd + Ref Frequency] (ALL)
CSA 0 [No] (NO)
1 [AQ1] (AO1)
2 [AQ2] (AO2)
129 [Ref Frequency 1] (AIFR1)
130 [Ref Frequency 2] (AIFR2)
131 [Ref Frequency 2 Summing] (AISA2)
132 [PID feedback] (AIPIF)
137 [Subtract Ref Freq 2] (AIDA2)
138 [Manual PID ref.] (AIPIM)
139 [PID Ref Frequency] (AIFPI)
160 [Ref Frequency 3 Summing] (AISA3)
161 [Ref Frequency 1B] (AIFR1B)
162 [Subtract Ref Freq 3] (AIDA3)
163 [Forced local] (AIFLOC)
164 [Ref Frequency 2 multiplier] (AIMA2)
165 [Ref Frequency 3 multiplier] (AIMA3)
168 [Virtual AI1 Channel] (AIAIC1)
170 [Virtual AI2 Channel] (AIAIC2)
171 [Virtual AI3 Channel] (AIAIC3)
205 [External Feed Forward] (AITEFF)
340 [InletPres Sensor] (PS1A)
341 [OutletPres Sensor] (PS2A)
342 [Inst Flow Sensor] (FS1A)
343 [Pump Flow Sensor] (FS2A)
344 [LevelCtrl Sensor] (LCSA)
CSLFN 0 [No] (NO)

# Internal
 181 [Preset Speed 1] (FNPS1)
182 [Preset Speed 2] (FNPS2)
183 [PID Ref Freq 1] (FNPR1)
184 [PID Ref Freq 2] (FNPR2)
185 [+speed] (FNUSP)
186 [-speed] (FNDSP)
CSLOUT 0 [No] (NO)
146 [R2] (R2)
147 [R3] (R3)
148 [R4] (R4)
149 [R5] (R5)
150 [R6] (R6)
163 [DQ11 Digital Output] (DO11)
164 [DQ12 Digital Output] (DO12)
200 [VSP] (VSP)
209 [R60] (R60)
210 [R61] (R61)
211 [R62] (R62)
212 [R63] (R63)
213 [R64] (R64)
214 [R65] (R65)
215 [R66] (R66)
CTT 3 [U/F VC Standard] (STD)
4 [U/F VC 5pts] (UF5)
6 [U/F VC Quad.] (UFQ)
10 [SYN_U VC] (SYNU)
11 [U/F VC Energy Sav.] (ECO)
12 [Reluctance Motor] (SRVC)
DCRC 0 [Ignore] (NO)
1 [Warning] (WARN)
2 [Error] (FLT)
DLR 0 [Locked drv] (DLR0)
1 [Unlock. drv] (DLR1)
2 [Not allowed] (DLR2)
3 [Lock/unlock] (DLR3)
DOTD 0 [Freewheel Stop] (NST)
1 [Ramp Stop] (RMP)
DPMA 1 [Master 1] (1)
2 [Master 2] (2)
DRT 0 [Normal Duty] (NORMAL)
1 [Heavy Duty] (HIGH)
DRYM 0 [No] (NO)
1 [Switch] (SWT)
2 [Power] (PWR)
DUR 0 [5 minutes] (5)
1 [10 minutes] (10)
2 [30 minutes] (30)
3 [1 hour] (1H)
4 [2 hours] (2H)
5 [3 hours] (3H)
6 [Unlimited] (CT)
ECFG 0 [Ignore] (NO)
1 [Freewheel Stop] (YES)
2 [Per STT] (STT)
4 [Fallback Speed] (LFF)
5 [Speed maintained] (RLS)
6 [Ramp stop] (RMP)
7 [Fast stop] (FST)
8 [DC injection] (DCI)
EFDR 0 [No Error] (NO)
1 [Server Timeout] (TOUT)

# Internal
 2 [Server No File] (SNF)
3 [Server Corrupt File] (CRPT)
4 [Server Empty File] (EPTY)
5 [Device Invalid File] (HINV)
6 [CRC Error] (CRC)
7 [Version Incompatibility] (VRM)
9 [Device No File] (HNF)
10 [Server Reading Size] (SIZE)
11 [Device Opening File] (OPEN)
12 [Device Reading File] (READ)
13 [Incompatibility] (SCNT)
14 [Device Invalid Name] (NINV)
15 [Server Incorrect File Size] (FSIZ)
16 [Device Writing File] (HWF)
17 [Server Writing File] (SWF)
EMDT 0 [KW Counter] (KWCT)
1 [Instant. kW trend] (CVE)
2 [Daily kWh report] (HSD)
3 [Weekly kWh report] (HSW)
4 [Monthly kWh report] (HSM)
5 [Yearly kWh report] (HSY)
ERRD 16#0000 [No Error] (NOF)
16#1000 [Precharge Capacitor] (CRF1)
16#1000 [Motor Overspeed] (SOF)
16#1000 [Internal Error 14] (INFE)
16#1000 [Channel Switch Error] (CSF)
16#1000 [Angle error] (ASF)
16#2130 [AFE ShortCircuit error] (SCF6)
16#2230 [IGBT Short Circuit] (SCF4)
16#2310 [Overcurrent] (OCF)
16#2311 [Process Overload] (OLC)
16#2320 [Motor short circuit] (SCF1)
16#2320 [Motor Short Circuit] (SCF5)
16#2330 [Ground Short Circuit] (SCF3)
16#2350 [Motor Overload] (OLF)
16#3110 [Supply Mains Overvoltage] (OSF)
16#3120 [Supply Mains UnderV] (USF)
16#3130 [Input Phase Loss] (PHF)
16#3280 [AFE Bus unbalancing] (OBF2)
16#3300 [Single output phase loss] (OPF1)
16#3310 [DC Bus Overvoltage] (OBF)
16#3310 [Output Phase Loss] (OPF2)
16#4210 [Input Overheating] (IHF)
16#4210 [Device Overheating] (OHF)
16#4210 [IGBT Overheating] (TJF)
16#4210 [Fan Feedback Error] (FFDF)
16#4210 [Module Overheat] (MOF)
16#4210 [AI2 Th Level Error] (TH2F)
16#4210 [AI3 Th Level Error] (TH3F)
16#4210 [AI4 Th Level Error] (TH4F)
16#4210 [AI5 Th Level Error] (TH5F)
16#4210 [Cooling Pump Error] (COPF)
16#5000 [Out Contact Closed Error] (FCF1)
16#5000 [Out Contact Opened Error] (FCF2)
16#5000 [Input Contactor] (LCF)
16#5000 [Egy Saving Exit Error] (IDLF)
16#5100 [Internal Error 8] (INF8)
16#5100 [Internal Error 10] (INFA)
16#5210 [Internal Error 9] (INF9)
16#5210 [Internal Error 11] (INFB)
16#5210 [Internal Error 12] (INFC)

# Internal
16#5210 [Internal Error 13] (INFD)
16#5500 [Internal Error 15] (INFF)
16#5530 [Control Memory Error] (EEF1)
16#5530 [Power Memory Error] (EEF2)
16#6100 [Internal Link Error] (ILF)
16#6100 [Internal Error 1] (INF1)
16#6100 [Internal Error 2] (INF2)
16#6100 [Internal Error 3] (INF3)
16#6100 [Internal Error 4] (INF4)
16#6100 [Internal Error 7] (INF7)
16#6100 [Internal Error 6] (INF6)
16#6100 [Boards Compatibility] (HCF)
16#6100 [Internal Error 0] (INF0)
16#6100 [Internal Error 21] (INFL)
16#6100 [Internal Error 22] (INFM)
16#6100 [Internal Error 25] (INFP)
16#6100 [Internal Error 20] (INFK)
16#6100 [Internal Error 27] (INFR)
16#6100 [MonitorCircuit A Error] (IFA)
16#6100 [MonitorCircuit B Error] (IFB)
16#6100 [MonitorCircuit C Error] (IFC)
16#6100 [MonitorCircuit D Error] (IFD)
16#6100 [CabinetCircuit A Error] (CFA)
16#6100 [CabinetCircuit B Error] (CFB)
16#6100 [CabinetCircuit C Error] (CFC)
16#6100 [MotorWinding A Error] (TFA)
16#6100 [MotorWinding B Error] (TFB)
16#6100 [MotorBearing A Error] (TFC)
16#6100 [MotorBearing B Error] (TFD)
16#6100 [Cabinet Overheat Error] (CHF)
16#6100 [AFE Mains Undervoltage] (URF)
16#6100 [Internal Error 31] (INFV)
16#6100 [Internal Error 29] (INFT)
16#6100 [Internal Error 30] (INFU)
16#6100 [AFE IGBT over-heat error] (TJF2)
16#6100 [AFE contactor feedback error] (CRF3)
16#6100 [AFE DC-Caps Error] (ACF1)
16#6100 [AFE Current Control Error] (ACF2)
16#6100 [Mains Freq Out Of Range] (MFF)
16#6100 [AFE Line Filter Error] (ACF3)
16#6300 [Incorrect Config] (CFF)
16#6300 [Invalid Configuration] (CFI)
16#6300 [Conf Transfer Error] (CFI2)
16#6300 [Pre-settings Transfer Error] (CFI3)
16#6300 [Circuit Breaker Error] (CBF)
16#7000 [Internal Error 16] (INFG)
16#7000 [Internal Error 17] (INFH)
16#7000 [Firmware Update Error] (FWER)
16#7121 [Motor Stall Error] (STF)
16#7300 [AI2 4-20mA loss] (LFF2)
16#7300 [AI3 4-20mA loss] (LFF3)
16#7300 [AI4 4-20mA loss] (LFF4)
16#7300 [AI5 4-20 mA loss] (LFF5)
16#7300 [AI1 4-20 mA loss] (LFF1)
16#7300 [AI2 Thermal Sensor Error] (T2CF)
16#7300 [AI3 Thermal Sensor Error] (T3CF)
16#7300 [AI4 Thermal Sensor Error] (T4CF)
16#7300 [AI5 Thermal Sensor Error] (T5CF)
16#7400 [Program Loading Error] (PGLF)
16#7400 [Program Running Error] (PGRF)
16#7500 [PID Feedback Error] (PFMF)

# Internal
 16#7510 [Modbus Com Interruption] (SLF1)
16#7510 [HMI Com Interruption] (SLF3)
16#7520 [Fieldbus Com Interrupt] (CNF)
16#7530 [PC Com Interruption] (SLF2)
16#7540 [Embd Eth Com Interrupt] (ETHF)
16#7810 [Security Files Corrupt] (SPFC)
16#8100 [CANopen Com Interrupt] (COF)
16#8800 [Internal Error 23] (INFN)
16#9000 [External Error] (EPF1)
16#9000 [Fieldbus Error] (EPF2)
16#9000 [FDR 1 Error] (FDR1)
16#9000 [FDR 2 Error] (FDR2)
16#FF00 [Autotuning Error] (TNF)
16#FF03 [Process Underload] (ULF)
16#FF03 [Safety Function Error] (SAFF)
16#FF11 [PumpCycle start Error] (PCPF)
16#FF11 [Inlet Pressure Error] (IPPF)
16#FF11 [Pump Low Flow Error] (PLFF)
16#FF11 [Anti Jam Error] (JAMF)
16#FF11 [Dry Run Error] (DRYF)
16#FF12 [Out Pressure Low] (OPLF)
16#FF12 [High Flow Error] (HFPF)
16#FF12 [Out Pressure High] (OPHF)
16#FF12 [VxCtrl Error] (VCF)
16#FF20 [ON Lock Error] (LKON)
16#FFFF [Lead Pump Error] (MPLF)
16#FFFF [Low Level Error] (LCLF)
16#FFFF [High Level Error] (LCHF)
16#FFFF [Internal Error 28] (INFS)
16#FFFF [MultiDrive Link Error] (MDLF)
16#FFFF [M/P Device Error] (MPDF)
16#FFFF [Cab I/O 24V Error] (P24C)
16#FFFF [DC Bus Ripple Error] (DCRE)
16#FFFF [Adv.Function Lock] (AFLF)
FCS 0 [No] (NO)
1 [Recall customer parameter set 0] (REC0)
2 [Recall customer parameter set 1] (REC1)
3 [Recall customer parameter set 2] (REC2)
4 [Recall customer parameter set 3] (REC3)
64 [Recall default parameter set] (INI)
71 [Recall OEM default parameter set] (INI1)
FCSI 0 [Macro Config] (INI)
2 [Config 1] (CFG1)
3 [Config 2] (CFG2)
4 [Config 3] (CFG3)
FDRA 0 [NOT ACTIVE] (IDLE)
1 [SAVE] (SAVE)
2 [REST] (REST)
FEM 0 [No] (NO)
1 [HQ] (HQ)
2 [PQ] (PQ)
FFM 0 [Standard] (STD)
1 [Always] (RUN)
2 [Never] (STP)
3 [Economy] (ECO)
FLCM 0 [Inactive] (NO)
1 [Display] (MON)
2 [Compensation] (COMP)
FLR 0 [Not Configured] (NO)
1 [Yes On Freewheel] (YES)
2 [Yes Always] (ALL)

# Internal
FOR 2 [8-O-1] (8O1)
3 [8-E-1] (8E1)
4 [8-N-1] (8N1)
5 [8-N-2] (8N2)
FWER 0 [No Error] (NO)
1 [Lock Error] (LOCK)
2 [Package Error] (MD5)
3 [Package compatibility error] (COMP)
4 [Ask error] (ASK)
5 [Reset Device Error] (RESET)
6 [Conf Saving Warning] (SAVE)
7 [Conf Loading Warning] (LOAD)
8 [Post Script Warning] (SCP)
9 [Package Description Error] (DES)
10 [Package not found] (PKG)
11 [Power Supply error] (SPWR)
12 [Boot M3 error] (BTM3)
13 [Boot C28 error] (BTC28)
14 [M3 Error] (M3)
15 [C28 error] (C28)
16 [CPLD error] (CPLD)
17 [Boot Power Error] (PWR)
18 [Emb. Eth Boot Error] (EMBT)
19 [Emb. Eth Error] (EMIL)
20 [Emb. Eth Web Error] (EMWB)
21 [Module Eth Boot Error] (OPTBT)
22 [Module Eth Error] (OPTIL)
23 [Module Eth Web Error] (OPTWB)
24 [Password enabled] (PSWD)
25 [Flash Error] (MEM)
26 [Package error] (IFO)
27 [Wait] (WAIT)
FWST 0 [Inactive] (CHECK)
1 [PwrUpd in progress] (POWER)
2 [PwrUpd Pending] (PEND)
3 [Ready] (RDY)
4 [Inactive] (NO)
5 [Succeeded] (SUCCD)
6 [Update Error] (FAILED)
7 [In Progress] (PROG)
8 [Requested] (RQSTD)
9 [Transfer In Progress] (TRLD)
10 [Transfer Done] (TROK)
11 [Package cleared] (CLEAR)
12 [Warning] (SUCWR)
13 [Device State Error] (FLSTA)
14 [Package Error] (FLPKG)
15 [Saving conf] (SAVE)
16 [Post Script] (POST)
HMIS 0 [Autotuning] (TUN)
1 [In DC inject.] (DCB)
2 [Ready] (RDY)
3 [Freewheel] (NST)
4 [Running] (RUN)
5 [Accelerating] (ACC)
6 [Decelerating] (DEC)
7 [Current Limitation] (CLI)
8 [Fast stop] (FST)
11 [No Mains Voltage] (NLP)
13 [control.stop] (CTL)
14 [Dec. adapt.] (OBR)

# Internal
 15 [Output cut] (SOC)
17 [Undervoltage Warning] (USA)
18 [TC Mode Active] (TC)
19 [In autotest] (ST)
20 [Autotest error] (FA)
21 [Autotest OK] (OK)
22 [EEprom test] (EP)
23 [Operating State "Fault"] (FLT)
25 [DCP Flashing Mode] (DCP)
30 [STO active] (STO)
35 [Energy Saving] (IDLE)
36 [Firmware Update] (FWUP)
37 [AFE Mains Undervoltage] (URA)
IFM 0 [Always Active] (ALL)
1 [Ready & Run State] (RRY)
2 [Run State] (RUN)
INHS 0 [Disabled] (NO)
1 [Forced Run FW] (FRD)
2 [Forced Run RV] (RRS)
INR 0 [0.01] (001)
1 [0.1] (01)
2 [1] (1)
IPAE 0 [Idle State] (IDLE)
1 [Init] (INIT)
2 [Configuration] (CONF)
3 [Ready] (RDY)
4 [Operational] (OPE)
5 [Not Configured] (UCFG)
6 [Unrecoverable Error] (UREC)
IPM 0 [Fixed] (MANU)
1 [BOOTP] (BOOTP)
2 [DHCP] (DHCP)
3 [DCP] (DCP)
IPPM 0 [No] (NO)
1 [Warning] (ALARM)
2 [Compensation] (COMP)
JATC 0 [No] (NO)
1 [Start] (START)
2 [Time] (TIME)
3 [Torque] (TORQUE)
LAC 0 [Basic] (BAS)
1 [Standard] (STD)
3 [Expert] (EPR)
4 [Services] (SER)
LCM 0 [No] (NO)
1 [Filling] (FILL)
2 [Emptying] (EMPTY)
LCNT 0 [Level Switches] (SW)
1 [Level Sensor] (LEVEL)
2 [Pressure sensor] (PRES)
LCPM 0 [Simultaneous Stop] (COMM)
1 [Individual Stop] (INDIV)
LCS 0 [None] (NONE)
1 [Inactive] (NACT)
2 [Filling] (FILL)
3 [Emptying] (EMPTY)
4 [Low Level] (LOW)
5 [High Level] (HIGH)
LCST 0 [Switches] (TRAD)
1 [Standard] (BASIC)
2 [Energy Optimized] (ADV)

# Internal
LDD 0 [Distrib. Log. DISABLE] (NO)
1 [Motor Frequency] (RFR)
2 [Motor Current] (LCR)
3 [Motor Speed] (SPD)
4 [Motor Voltage] (UOP)
5 [Motor Mech. Power] (OPRW)
6 [Input Elec. Power] (IPRW)
7 [Output Elec. Power] (EPRW)
8 [Motor Torque] (OTR)
9 [Mains Voltage] (ULN)
10 [DC BUS Voltage] (VBUS)
11 [PID feedback] (RPF)
12 [AI2 Th Value] (TH2V)
13 [AI3 Th Value] (TH3V)
14 [AI4 Th Value] (TH4V)
15 [AI5 Th Value] (TH5V)
16 [Drive Thermal State] (THD)
17 [Motor Thermal State] (THR)
18 [Installation Flow] (FS1V)
19 [Pump Flow] (FS2V)
20 [Inlet Pressure] (PS1V)
21 [Outlet Pressure] (PS2V)
22 [Energy Consum. Ind.] (ECI)
23 [Pump efficiency] (EFY)
24 [Energy Perf. Ind.] (EPI)
25 [Mains Current] (ILN)
26 [Input Reactive Power] (IQRW)
27 [Input Power Factor] (PWF)
28 [AI1 Th Value] (TH1V)
29 [DBR Thermal State] (THB)
LDEN 0 [Stop] (STOP)
1 [Start] (START)
2 [Always] (ALWAYS)
3 [Reset] (RESET)
4 [Clear] (CLEAR)
5 [Error] (ERROR)
LDST 2 [200 ms] (200MS)
10 [1 second] (1S)
20 [2 seconds] (2S)
50 [5 seconds] (5S)
LFT 0 [No Error] (NOF)
2 [Control Memory Error] (EEF1)
3 [Incorrect Config] (CFF)
4 [Invalid Configuration] (CFI)
5 [Modbus Com Interruption] (SLF1)
6 [Internal Link Error] (ILF)
7 [Fieldbus Com Interrupt] (CNF)
8 [External Error] (EPF1)
9 [Overcurrent] (OCF)
10 [Precharge Capacitor] (CRF1)
13 [AI2 4-20mA loss] (LFF2)
15 [Input Overheating] (IHF)
16 [Device Overheating] (OHF)
17 [Motor Overload] (OLF)
18 [DC Bus Overvoltage] (OBF)
19 [Supply Mains Overvoltage] (OSF)
20 [Single output phase loss] (OPF1)
21 [Input Phase Loss] (PHF)
22 [Supply Mains UnderV] (USF)
23 [Motor short circuit] (SCF1)
24 [Motor Overspeed] (SOF)

# Internal
25 [Autotuning Error] (TNF)
26 [Internal Error 1] (INF1)
27 [Internal Error 2] (INF2)
28 [Internal Error 3] (INF3)
29 [Internal Error 4] (INF4)
30 [Power Memory Error] (EEF2)
32 [Ground Short Circuit] (SCF3)
33 [Output Phase Loss] (OPF2)
34 [CANopen Com Interrupt] (COF)
37 [Internal Error 7] (INF7)
38 [Fieldbus Error] (EPF2)
40 [Internal Error 8] (INF8)
42 [PC Com Interruption] (SLF2)
45 [HMI Com Interruption] (SLF3)
51 [Internal Error 9] (INF9)
52 [Internal Error 10] (INFA)
53 [Internal Error 11] (INFB)
54 [IGBT Overheating] (TJF)
55 [IGBT Short Circuit] (SCF4)
56 [Motor Short Circuit] (SCF5)
58 [Out Contact Closed Error] (FCF1)
59 [Out Contact Opened Error] (FCF2)
60 [Internal Error 12] (INFC)
64 [Input Contactor] (LCF)
68 [Internal Error 6] (INF6)
69 [Internal Error 14] (INFE)
71 [AI3 4-20mA loss] (LFF3)
72 [AI4 4-20mA loss] (LFF4)
73 [Boards Compatibility] (HCF)
77 [Conf Transfer Error] (CFI2)
79 [AI5 4-20 mA loss] (LFF5)
80 [Fan Feedback Error] (FFDF)
81 [Module Overheat] (MOF)
82 [ON Lock Error] (LKON)
99 [Channel Switch Error] (CSF)
100 [Process Underload] (ULF)
101 [Process Overload] (OLC)
105 [Angle error] (ASF)
106 [AI1 4-20 mA loss] (LFF1)
107 [Safety Function Error] (SAFF)
110 [AI2 Th Level Error] (TH2F)
111 [AI2 Thermal Sensor Error] (T2CF)
112 [AI3 Th Level Error] (TH3F)
113 [AI3 Thermal Sensor Error] (T3CF)
114 [PumpCycle start Error] (PCPF)
115 [Out Pressure Low] (OPLF)
116 [High Flow Error] (HFPF)
117 [Inlet Pressure Error] (IPPF)
119 [Pump Low Flow Error] (PLFF)
120 [AI4 Th Level Error] (TH4F)
121 [AI4 Thermal Sensor Error] (T4CF)
122 [AI5 Th Level Error] (TH5F)
123 [AI5 Thermal Sensor Error] (T5CF)
124 [Anti Jam Error] (JAMF)
125 [Out Pressure High] (OPHF)
126 [Dry Run Error] (DRYF)
127 [PID Feedback Error] (PFMF)
128 [Program Loading Error] (PGLF)
129 [Program Running Error] (PGRF)
130 [Lead Pump Error] (MPLF)
131 [Low Level Error] (LCLF)

# Internal
 132 [High Level Error] (LCHF)
142 [Internal Error 16] (INFG)
143 [Internal Error 17] (INFH)
144 [Internal Error 0] (INF0)
146 [Internal Error 13] (INFD)
148 [Motor Stall Error] (STF)
149 [Internal Error 21] (INFL)
150 [Embd Eth Com Interrupt] (ETHF)
151 [Internal Error 15] (INFF)
152 [Firmware Update Error] (FWER)
153 [Internal Error 22] (INFM)
154 [Internal Error 25] (INFP)
155 [Internal Error 20] (INFK)
157 [Internal Error 27] (INFR)
158 [Internal Error 23] (INFN)
159 [AFE ShortCircuit error] (SCF6)
160 [AFE Bus unbalancing] (OBF2)
161 [Internal Error 28] (INFS)
162 [MonitorCircuit A Error] (IFA)
163 [MonitorCircuit B Error] (IFB)
164 [MonitorCircuit C Error] (IFC)
165 [MonitorCircuit D Error] (IFD)
166 [CabinetCircuit A Error] (CFA)
167 [CabinetCircuit B Error] (CFB)
168 [CabinetCircuit C Error] (CFC)
169 [MotorWinding A Error] (TFA)
170 [MotorWinding B Error] (TFB)
171 [MotorBearing A Error] (TFC)
172 [MotorBearing B Error] (TFD)
173 [Cabinet Overheat Error] (CHF)
174 [AFE Mains Undervoltage] (URF)
175 [Internal Error 31] (INFV)
176 [Internal Error 29] (INFT)
177 [Internal Error 30] (INFU)
179 [AFE IGBT over-heat error] (TJF2)
180 [AFE contactor feedback error] (CRF3)
181 [Pre-settings Transfer Error] (CFI3)
182 [Circuit Breaker Error] (CBF)
186 [MultiDrive Link Error] (MDLF)
190 [M/P Device Error] (MPDF)
191 [AFE DC-Caps Error] (ACF1)
192 [AFE Current Control Error] (ACF2)
193 [Mains Freq Out Of Range] (MFF)
200 [FDR 1 Error] (FDR1)
201 [FDR 2 Error] (FDR2)
203 [Cab I/O 24V Error] (P24C)
206 [DC Bus Ripple Error] (DCRE)
207 [VxCtrl Error] (VCF)
208 [Egy Saving Exit Error] (IDLF)
211 [Security Files Corrupt] (SPFC)
212 [AFE Line Filter Error] (ACF3)
213 [Cooling Pump Error] (COPF)
220 [Adv.Function Lock] (AFLF)
LKON 0 [Warning] (ALRM)
1 [Error] (FLT)
2 [Warning Then Error] (ALFLT)
MDT 0 [Digital] (DEC)
1 [Bar graph] (BAR)
2 [List] (LIST)
3 [Vu Meter] (VUMET)
MPC 0 [Mot Power] (NPR)

# Internal
 1 [Mot Cosinus] (COS)
MPDT 0 [Slave] (SLAVE)
1 [Master] (MAST)
2 [Master Only] (MAST1)
3 [Master or Slave] (MAST2)
MPLA 0 [No] (NO)
1 [Standard] (YES)
2 [Redundancy] (RED)
MPPC 0 [FIFO] (FIFO)
1 [LIFO] (LIFO)
2 [Runtime] (RTIME)
3 [Runtime&LIFO] (RTLF)
MPS 0 [None] (NONE)
1 [Ready] (READY)
2 [Running] (RUN)
3 [Warning] (ALARM)
4 [Error] (FAULT)
5 [Not Available] (NAVL)
MPSA 0 [Mono-Pump] (NO)
1 [Single Drive] (VNDOL)
2 [Multi Drives] (NVSD)
3 [Multi Masters] (NVSDR)
MPST 0 [Standard] (TMC)
1 [Distributed] (DMC)
2 [Advanced] (AMC)
3 [Synchronized] (SYNC)
NCV 0 [Unknown rating] (NO)
1 [0.12kW] (U010)
2 [0.18kW / 0.25Hp] (U018)
3 [0.25kW] (U025)
4 [0.37 kW / 0.5 Hp] (U037)
5 [0.55 kW /0.75 Hp] (U055)
6 [0.75 kW / 1 Hp] (U075)
7 [5.5kW / 7.5HP] (U090)
8 [1.1 kW / 1.5 Hp] (U110)
9 [1.5 kW / 2 Hp] (U150)
10 [1.85kW] (U185)
11 [2.2 kW / 3 Hp] (U220)
12 [3 kW / 4HP] (U300)
13 [4kW / 5HP] (U370)
14 [4kW / 5HP] (U400)
15 [5.5 kW / 7.5 Hp] (U550)
16 [7.5 kW / 10 Hp] (U750)
17 [9kW] (U900)
18 [11 kW / 15 Hp] (D110)
19 [15 kW / 20 Hp] (D150)
20 [18,5kW / 25HP] (D185)
21 [22kW / 30HP] (D220)
22 [30kW / 40HP] (D300)
23 [37kW / 50HP] (D370)
24 [45kW / 60HP] (D450)
25 [55kW / 75HP] (D550)
26 [75kW / 100HP] (D750)
27 [90kW / 125HP] (D900)
28 [110 kW / 150HP] (C110)
29 [132kW / 200 HP] (C132)
30 [160kW / 250HP] (C160)
31 [200kW / 300HP] (C200)
32 [220kW / 350HP] (C220)
33 [250kW / 400HP] (C250)
34 [280kW / 450HP] (C280)

# Internal
 35 [315kW / 500HP] (C315)
36 [355 kW / 450HP] (C355)
37 [400kW / 600HP] (C400)
38 [450kW / 750HP] (C450)
39 [500kW / 800HP] (C500)
40 [560kW / 850HP] (C560)
41 [630kW / 900HP] (C630)
42 [710kW / 950HP] (C710)
43 [800kW / 1000HP] (C800)
44 [900kW / 900HP] (C900)
45 [1000kW / 1000HP] (M100)
46 [1100kW / 1100HP] (M110)
47 [1200kW / 1200HP] (M120)
48 [1300kW / 1300HP] (M130)
49 [1400kW / 1400HP] (M140)
50 [1500kW / 1500HP] (M150)
51 [1600kW / 1600HP] (M160)
52 [1700kW / 1700HP] (M170)
53 [1800kW / 1800HP] (M180)
54 [1900kW / 1900HP] (M190)
55 [2000kW / 2000HP] (M200)
56 [2100kW / 2100HP] (M210)
57 [2200kW / 2200HP] (M220)
58 [2300kW / 2300HP] (M230)
59 [2400kW / 2400HP] (M240)
60 [2500 kW / 3333 Hp] (M250)
61 [2600 kW / 3467 Hp] (M260)
NMTS 0 [Boot] (BOOT)
2 [Stopped] (STOP)
1 [Operation] (OPE)
4 [Pre-op] (POPE)
NPL 0 [High Level] (POS)
1 [Low Level] (NEG)
N_Y 0 [No] (NO)
1 [Yes] (YES)
OFI 0 [No] (NO)
1 [Yes] (YES)
2 [Optimized] (OPT)
OPL 0 [Function Inactive] (NO)
1 [OPF Error Triggered] (YES)
2 [No Error Triggered] (OAC)
OPPM 0 [No] (NO)
1 [Switch] (SW)
2 [Sensor] (SNSR)
3 [Both] (BOTH)
OVMA 0 [Default] (DEFAULT)
255 [Full] (FULL)
PCM 0 [No] (NO)
1 [HQ] (HQ)
2 [PQ] (PQ)
3 [PHQ] (PHQ)
PCPM 0 [No] (NO)
1 [Mode 1] (NORM)
2 [Mode 2] (RTC)
PCS 0 [None] (NONE)
1 [Inactive] (NACT)
2 [Active] (ACTIVE)
3 [Failed] (FAILED)
PFM 0 [No] (NO)
1 [Feedback] (FBK)
2 [Outlet Pressure] (PS2)

# Internal
PHR 0 [ABC] (ABC)
1 [ACB] (ACB)
PKTP 0 [Product] (PRD)
1 [Module] (OPT)
2 [Spare parts] (SPR)
3 [Customized] (CUS)
4 [Indus] (IND)
PLFM 0 [No] (NO)
1 [Switch] (SW)
2 [Flow] (Q)
3 [Flow vs Speed] (QN)
5 [No Flow Power] (NF)
PMDT 0 [Parameters List] (NO)
1 [Operating Time] (HOT)
2 [Nb of Starts] (HNS)
3 [Efficiency] (EFF)
4 [Power vs Flow] (CPQ)
5 [Head vs Flow] (CHQ)
6 [Efficiency vs Flow] (CEQ)
PNID 0 [None] (NONE)
1 [Pump 1] (P01)
2 [Pump 2] (P02)
3 [Pump 3] (P03)
4 [Pump 4] (P04)
5 [Pump 5] (P05)
6 [Pump 6] (P06)
PRFL 0 [Not Configured] (UNCG)
1 [1] (1)
100 [100] (100)
101 [101] (101)
102 [102] (102)
106 [106] (106)
107 [107] (107)
PSA 0 [Not Configured] (NO)
1 [AI1] (AI1)
2 [AI2] (AI2)
3 [AI3] (AI3)
4 [AI4] (AI4)
5 [AI5] (AI5)
129 [Motor Current] (OCR)
130 [Motor Frequency] (OFR)
131 [Ramp Out.] (ORP)
132 [Motor Torq.] (TRQ)
133 [Sign. Torque] (STQ)
134 [sign Ramp] (ORS)
135 [PID Ref.] (OPS)
136 [PID Feedbk] (OPF)
137 [PID Error] (OPE)
138 [PID Output] (OPI)
139 [Motor Power] (OPR)
140 [Mot Thermal] (THR)
141 [Drv Thermal] (THD)
160 [Ref Frequency via DI] (UPDT)
163 [HMI] (LCC)
164 [Ref. Freq-Modbus] (MDB)
167 [Ref. Freq-CANopen] (CAN)
169 [Ref. Freq-Com. Module] (NET)
171 [Embedded Ethernet] (ETH)
173 [Sig. O/P Frq.] (OFS)
180 [Motor volt.] (UOP)
183 [AI Virtual 1] (AIV1)

# Internal
 185 [AI Virtual 2] (AIV2)
197 [AI Virtual 3] (AIV3)
186 [DI5 PulseInput Assignment] (PI5)
187 [DI6 PulseInput Assignment] (PI6)
340 [Est. Pump Flow] (SLPF)
341 [Inlet Pressure Value] (PS1V)
342 [Outlet Pressure Value] (PS2V)
343 [Installation Flow] (FS1V)
346 [Est. System Flow] (SLSF)
347 [Est. Pump Head] (SLPH)
348 [Est. Pump dP] (SLDP)
349 [Est. System dP] (SLSD)
510 [Mixing Valve] (MVCO)
PSL 0 [Not Assigned] (NO)
1 [Operating State Fault] (FLT)
2 [Device Running] (RUN)
3 [Output cont] (OCC)
4 [Mot Freq High Thd] (FTA)
5 [High Speed Reached] (FLA)
6 [Current Thd Reached] (CTA)
7 [Ref Freq Reached] (SRA)
8 [Motor Therm Thd reached] (TSA)
10 [PID error Warning] (PEE)
11 [PID Feedback Warn] (PFA)
12 [AI2 4-20 Warning] (AP2)
13 [Mot Freq High Thd 2] (F2A)
14 [Dev Thermal reached] (TAD)
16 [Ref Freq High Thd reached] (RTAH)
17 [Ref Freq Low Thd reached] (RTAL)
18 [Mot Freq Low Thd] (FTAL)
19 [Mot Freq Low Thd 2] (F2AL)
20 [Low Current Reached] (CTAL)
21 [Process Undld Warn] (ULA)
22 [Process Overload Warning] (OLA)
23 [PID High Fdbck Warn] (PFAH)
24 [PID Low Fdbck Warn] (PFAL)
25 [Regulation Warning] (PISH)
26 [Forced Run] (ERN)
28 [High Torque Warning] (TTHA)
29 [Low Torque Warning] (TTLA)
30 [Forward] (MFRD)
31 [Reverse] (MRRS)
34 [Ramp switching] (RP2)
42 [HMI L/R cmd] (BMP)
47 [Neg Torque] (ATS)
48 [Cnfg.0 act.] (CNF0)
52 [set 1 active] (CFP1)
53 [set 2 active] (CFP2)
54 [set 3 active] (CFP3)
55 [set 4 active] (CFP4)
64 [DC charged] (DBL)
66 [Power Removal State] (PRM)
73 [Mains Contactor] (LLC)
77 [I present] (MCP)
80 [Warning Grp 1] (AG1)
81 [Warning Grp 2] (AG2)
82 [Warning Grp 3] (AG3)
87 [External Error Warning] (EFA)
88 [Undervoltage Warning] (USA)
89 [Preventive UnderV Active] (UPA)
91 [Device Therm Warn] (THA)

# Internal
92 [AFE Mains Undervoltage] (URA)
96 [Ref Freq Channel 1] (FR1)
97 [Ref Freq Channel 2] (FR2)
98 [Cmd Channel 1] (CD1)
99 [Cmd Channel 2] (CD2)
100 [ch1B active] (FR1B)
104 [IGBT Thermal Warning] (TJA)
107 [AI3 4-20 Warning] (AP3)
108 [AI4 4-20 Warning] (AP4)
110 [Flow Limit Active] (FSA)
116 [Function key 1] (FN1)
117 [Function key 2] (FN2)
118 [Function key 3] (FN3)
119 [Function key 4] (FN4)
123 [AI1 4-20 Warning] (AP1)
127 [Ready] (RDY)
128 [Yes] (YES)
129 [DI1] (LI1)
130 [DI2] (LI2)
131 [DI3] (LI3)
132 [DI4] (LI4)
133 [DI5] (LI5)
134 [DI6] (LI6)
139 [DI11] (LI11)
140 [DI12] (LI12)
141 [DI13] (LI13)
142 [DI14] (LI14)
143 [DI15] (LI15)
144 [DI16] (LI16)
160 [CD00] (CD00)
161 [CD01] (CD01)
162 [CD02] (CD02)
163 [CD03] (CD03)
164 [CD04] (CD04)
165 [CD05] (CD05)
166 [CD06] (CD06)
167 [CD07] (CD07)
168 [CD08] (CD08)
169 [CD09] (CD09)
170 [CD10] (CD10)
171 [CD11] (CD11)
172 [CD12] (CD12)
173 [CD13] (CD13)
174 [CD14] (CD14)
175 [CD15] (CD15)
176 [C100] (C100)
177 [C101] (C101)
178 [C102] (C102)
179 [C103] (C103)
180 [C104] (C104)
181 [C105] (C105)
182 [C106] (C106)
183 [C107] (C107)
184 [C108] (C108)
185 [C109] (C109)
186 [C110] (C110)
187 [C111] (C111)
188 [C112] (C112)
189 [C113] (C113)
190 [C114] (C114)
191 [C115] (C115)

# Internal
192 [C200] (C200)
193 [C201] (C201)
194 [C202] (C202)
195 [C203] (C203)
196 [C204] (C204)
197 [C205] (C205)
198 [C206] (C206)
199 [C207] (C207)
200 [C208] (C208)
201 [C209] (C209)
202 [C210] (C210)
203 [C211] (C211)
204 [C212] (C212)
205 [C213] (C213)
206 [C214] (C214)
207 [C215] (C215)
208 [C300] (C300)
209 [C301] (C301)
210 [C302] (C302)
211 [C303] (C303)
212 [C304] (C304)
213 [C305] (C305)
214 [C306] (C306)
215 [C307] (C307)
216 [C308] (C308)
217 [C309] (C309)
218 [C310] (C310)
219 [C311] (C311)
220 [C312] (C312)
221 [C313] (C313)
222 [C314] (C314)
223 [C315] (C315)
240 [C500] (C500)
241 [C501] (C501)
242 [C502] (C502)
243 [C503] (C503)
244 [C504] (C504)
245 [C505] (C505)
246 [C506] (C506)
247 [C507] (C507)
248 [C508] (C508)
249 [C509] (C509)
250 [C510] (C510)
251 [C511] (C511)
252 [C512] (C512)
253 [C513] (C513)
254 [C514] (C514)
255 [C515] (C515)
272 [DI1 (Low level)] (L1L)
273 [DI2 (Low level)] (L2L)
274 [DI3 (Low level)] (L3L)
275 [DI4 (Low level)] (L4L)
276 [DI5 (Low level)] (L5L)
277 [DI6 (Low level)] (L6L)
282 [DI11 (Low level)] (L11L)
283 [DI12 (Low level)] (L12L)
284 [DI13 (Low level)] (L13L)
285 [DI14 (Low level)] (L14L)
286 [DI15 (Low level)] (L15L)
287 [DI16 (Low level)] (L16L)
302 [DI50 (High Level)] (D50H)

# Internal
303 [DI51 (High Level)] (D51H)
304 [DI52 (High Level)] (D52H)
305 [DI53 (High Level)] (D53H)
306 [DI54 (High Level)] (D54H)
307 [DI55 (High Level)] (D55H)
308 [DI56 (High Level)] (D56H)
309 [DI57 (High Level)] (D57H)
310 [DI58 (High Level)] (D58H)
311 [DI59 (High Level)] (D59H)
312 [DI50 (Low level)] (D50L)
313 [DI51 (Low level)] (D51L)
314 [DI52 (Low level)] (D52L)
315 [DI53 (Low level)] (D53L)
316 [DI54 (Low level)] (D54L)
317 [DI55 (Low level)] (D55L)
318 [DI56 (Low level)] (D56L)
319 [DI57 (Low level)] (D57L)
320 [DI58 (Low level)] (D58L)
321 [DI59 (Low level)] (D59L)
336 [DC Bus Ripple Warn] (DCRW)
337 [Modbus Com Inter.] (SLF1)
340 [Jockey] (JOKY)
341 [Priming] (PRIM)
342 [Anti-Jam Active] (JAMR)
344 [Pipe Fill] (FILL)
345 [Priming Pump Active] (PPON)
346 [Dry Run Warning] (DRYA)
347 [Pump Low Flow] (PLFA)
348 [Proc High Flow Warn] (HFPA)
349 [InPress Warning] (IPPA)
350 [Low OutPres Warning] (OPLA)
351 [High OutPres Warn] (OPHA)
352 [Pump Cycle Warning] (PCPA)
353 [Anti-Jam Warning] (JAMA)
354 [Low Flow Warning] (LFA)
355 [Low Pressure Warn] (LPA)
356 [Switch OutPres Warn] (OPSA)
357 [Jockey Pump Active] (JPON)
358 [Pump 1 Cmd] (MPO1)
359 [Pump 2 Cmd] (MPO2)
360 [Pump 3 Cmd] (MPO3)
361 [Pump 4 Cmd] (MPO4)
362 [Pump 5 Cmd] (MPO5)
363 [Pump 6 Cmd] (MPO6)
364 [MP Capacity Warn] (MPCA)
365 [Lead Pump Warn] (MPLA)
366 [High Level Warning] (LCHA)
367 [Low Level Warning] (LCLA)
368 [Level Switch Warning] (LCWA)
369 [M/P Device Warn] (MPDA)
370 [M/P Master Activated] (MPMA)
384 [Rdy Or Run State] (RYRN)
385 [Idle Or Rdy State] (IDRY)
386 [Idle Rdy Or Run State] (IDRR)
387 [Idle State] (IDLE)
470 [Internal Error 22] (INFM)
472 [VxCtrl Running] (VCC)
473 [VxCtrl Warning] (VCA)
475 [Temp Sens AI2 Warn] (TS2A)
476 [Temp Sens AI3 Warn] (TS3A)
477 [Temp Sens AI4 Warn] (TS4A)

# Internal
 478 [Temp Sens AI5 Warn] (TS5A)
484 [Cust Warning 5] (CAS5)
488 [Cabinet Fan Command] (FCC)
489 [CB Start Pulse] (CBEP)
490 [CB Stop Pulse] (CBDP)
491 [Power Cons Warning] (POWD)
492 [Warning Grp 4] (AG4)
493 [Warning Grp 5] (AG5)
494 [Fallback speed] (FRF)
495 [Speed Maintained] (RLS)
496 [Per Type of Stop] (STT)
497 [Life Cycle Warn 1] (LCA1)
498 [Life Cycle Warn 2] (LCA2)
499 [AI2 Th Warning] (TP2A)
500 [AI3 Th Warning] (TP3A)
501 [AI4 Th Warning] (TP4A)
502 [AI5 Th Warning] (TP5A)
503 [AI5 4-20 Warning] (AP5)
504 [Fan Counter Warning] (FCTA)
505 [Fan Feedback Warn] (FFDA)
506 [Power High Threshold] (PTHA)
507 [Power Low Threshold] (PTHL)
508 [Cust Warning 1] (CAS1)
509 [Cust Warning 2] (CAS2)
510 [Cust Warning 3] (CAS3)
511 [Cust Warning 4] (CAS4)
PSLIN 0 [Not Assigned] (NO)
123 [AI1 4-20 Warning] (AP1)
12 [AI2 4-20 Warning] (AP2)
107 [AI3 4-20 Warning] (AP3)
108 [AI4 4-20 Warning] (AP4)
503 [AI5 4-20 Warning] (AP5)
1 [Operating State Fault] (FLT)
96 [Ref Freq Channel 1] (FR1)
97 [Ref Freq Channel 2] (FR2)
100 [ch1B active] (FR1B)
98 [Cmd Channel 1] (CD1)
99 [Cmd Channel 2] (CD2)
128 [Yes] (YES)
4 [Mot Freq High Thd] (FTA)
13 [Mot Freq High Thd 2] (F2A)
18 [Mot Freq Low Thd] (FTAL)
19 [Mot Freq Low Thd 2] (F2AL)
129 [DI1] (LI1)
130 [DI2] (LI2)
131 [DI3] (LI3)
132 [DI4] (LI4)
133 [DI5] (LI5)
134 [DI6] (LI6)
139 [DI11] (LI11)
140 [DI12] (LI12)
141 [DI13] (LI13)
142 [DI14] (LI14)
143 [DI15] (LI15)
144 [DI16] (LI16)
272 [DI1 (Low level)] (L1L)
273 [DI2 (Low level)] (L2L)
274 [DI3 (Low level)] (L3L)
275 [DI4 (Low level)] (L4L)
276 [DI5 (Low level)] (L5L)
277 [DI6 (Low level)] (L6L)

# Internal
282 [DI11 (Low level)] (L11L)
283 [DI12 (Low level)] (L12L)
284 [DI13 (Low level)] (L13L)
285 [DI14 (Low level)] (L14L)
286 [DI15 (Low level)] (L15L)
287 [DI16 (Low level)] (L16L)
160 [CD00] (CD00)
161 [CD01] (CD01)
162 [CD02] (CD02)
163 [CD03] (CD03)
164 [CD04] (CD04)
165 [CD05] (CD05)
166 [CD06] (CD06)
167 [CD07] (CD07)
168 [CD08] (CD08)
169 [CD09] (CD09)
170 [CD10] (CD10)
171 [CD11] (CD11)
172 [CD12] (CD12)
173 [CD13] (CD13)
174 [CD14] (CD14)
175 [CD15] (CD15)
177 [C101] (C101)
178 [C102] (C102)
179 [C103] (C103)
180 [C104] (C104)
181 [C105] (C105)
182 [C106] (C106)
183 [C107] (C107)
184 [C108] (C108)
185 [C109] (C109)
186 [C110] (C110)
187 [C111] (C111)
188 [C112] (C112)
189 [C113] (C113)
190 [C114] (C114)
191 [C115] (C115)
193 [C201] (C201)
194 [C202] (C202)
195 [C203] (C203)
196 [C204] (C204)
197 [C205] (C205)
198 [C206] (C206)
199 [C207] (C207)
200 [C208] (C208)
201 [C209] (C209)
202 [C210] (C210)
203 [C211] (C211)
204 [C212] (C212)
205 [C213] (C213)
206 [C214] (C214)
207 [C215] (C215)
209 [C301] (C301)
210 [C302] (C302)
211 [C303] (C303)
212 [C304] (C304)
213 [C305] (C305)
214 [C306] (C306)
215 [C307] (C307)
216 [C308] (C308)
217 [C309] (C309)

# Internal
 218 [C310] (C310)
219 [C311] (C311)
220 [C312] (C312)
221 [C313] (C313)
222 [C314] (C314)
223 [C315] (C315)
241 [C501] (C501)
242 [C502] (C502)
243 [C503] (C503)
244 [C504] (C504)
245 [C505] (C505)
246 [C506] (C506)
247 [C507] (C507)
248 [C508] (C508)
249 [C509] (C509)
250 [C510] (C510)
251 [C511] (C511)
252 [C512] (C512)
253 [C513] (C513)
254 [C514] (C514)
255 [C515] (C515)
302 [DI50 (High Level)] (D50H)
303 [DI51 (High Level)] (D51H)
304 [DI52 (High Level)] (D52H)
305 [DI53 (High Level)] (D53H)
306 [DI54 (High Level)] (D54H)
307 [DI55 (High Level)] (D55H)
308 [DI56 (High Level)] (D56H)
309 [DI57 (High Level)] (D57H)
310 [DI58 (High Level)] (D58H)
311 [DI59 (High Level)] (D59H)
312 [DI50 (Low level)] (D50L)
313 [DI51 (Low level)] (D51L)
314 [DI52 (Low level)] (D52L)
315 [DI53 (Low level)] (D53L)
316 [DI54 (Low level)] (D54L)
317 [DI55 (Low level)] (D55L)
318 [DI56 (Low level)] (D56L)
319 [DI57 (Low level)] (D57L)
320 [DI58 (Low level)] (D58L)
321 [DI59 (Low level)] (D59L)
PSS 0 [Not locked] (NACT)
1 [Locked] (ACT)
PSST 0 [No password defined] (NO)
1 [Password is unlocked] (ULK)
2 [Password is locked] (LOCK)
PST 0 [Stop Key No Priority] (NO)
1 [Stop Key Priority] (YES)
2 [Stop Key Priority All] (ALL)
PVIS 0 [Active] (ACT)
1 [All] (ALL)
PXCT 0 [Undefined] (NONE)
1 [Lead] (LEAD)
2 [Lead or Auxiliary] (LAF)
3 [Lead or Aux. Variable] (LAV)
4 [Auxiliary] (AUXF)
5 [Auxiliary Variable] (AUXV)
6 [Error] (ERR)
PXS 0 [None] (NONE)
1 [Not Available] (NAVL)
2 [Ready] (RDY)

# Internal
 3 [Running] (RUN)
QSTD 2 [Fast stop then disable voltage] (FST2)
6 [Fast stop then stay in quick stop state] (F
RDS 0 [Auto] (AUTO)
1 [10M. full] (10F)
2 [10M. half] (10H)
3 [100M. full] (100F)
4 [100M. half] (100H)
RIN 0 [No] (NO)
1 [Yes] (YES)
2 [Absolute] (ABS)
RPR 0 [No] (NO)
2 [Reset Run Time] (RTH)
3 [Reset Tot Run Time] (RTHI)
4 [Reset Power On Time] (PTH)
7 [Reset Fan Counter] (FTH)
8 [Reset Tot Pw On Time] (PTHI)
9 [Clear GTHI] (GTHI)
10 [Clear LTHI] (LTHI)
11 [Reset Start Count] (NSM)
12 [Reset Start Total] (NSMI)
13 [Clear AFE Fan] (FBAT)
14 [Clear Cabinet Fan] (FCT)
20 [Efficiency MAX] (EFYK)
21 [Efficiency MIN] (EFYJ)
22 [Flow Rate MAX] (FS1K)
23 [Flow Rate MIN] (FS1J)
24 [Reset Total Quantity] (FS1C)
30 [Clear BRTH] (BRTH)
31 [Clear BRTI] (BRTI)
32 [Clear AFE Power ON Time] (BPTH)
33 [Clear BPTI] (BPTI)
34 [Clear AFE Nb. start] (BNSA)
35 [Clear BNSI] (BNSI)
36 [Clear AFE Regen Time] (BGTH)
37 [Clear BGTI] (BGTI)
38 [Clear BLMI] (BLMI)
39 [Clear BLGI] (BLGI)
64 [Reset All (Service)] (ALL)
RPT 0 [Linear] (LIN)
1 [S-Ramp] (S)
2 [U-Ramp] (U)
3 [Customized] (CUS)
SCDX 0 [Inactive] (NO)
1 [Terminals+HMI Panel] (TERHMI)
SCS 0 [No] (NO)
1 [Config 0] (STR0)
2 [Config 1] (STR1)
3 [Config 2] (STR2)
4 [Config 3] (STR3)
SFDR 0 [Initialization] (INIT)
1 [Not Active] (IDLE)
2 [Operational] (OPE)
4 [Ready] (RDY)
5 [IP Configuration] (IPC)
7 [Not Configured] (UNCF)
8 [Reading Configuration] (GET)
9 [Writing Configuration] (SET)
10 [Applying Configuration] (APP)
SFT 1 [SFR type 1] (HF1)
2 [SFR type 2] (HF2)

# Internal
SLPM 0 [No] (NO)
1 [Switch] (SW)
2 [Flow] (LF)
3 [Speed] (SPD)
4 [Power] (PWR)
5 [Pressure] (HP)
6 [Multiple] (OR)
SMOT 0 [No info.] (NO)
1 [Low salient] (LLS)
2 [Med salient] (MLS)
3 [High salient] (HLS)
SOP 6 [6 µs] (6)
8 [8 µs] (8)
10 [10 µs] (10)
SSL 0 [Standard] (STD)
1 [High Perf] (HPF)
STAC 0 [Not Supported] (UNSP)
1 [Enabled] (EN)
2 [Disabled] (DIS)
STOS 0 [Not active] (IDLE)
1 [Active] (STO)
2 [Error] (FLT)
STP 0 [Inactive] (NO)
1 [Maintain DC Bus] (MMS)
2 [Ramp Stop] (RMP)
4 [Freewheel Stop] (LNF)
STR 0 [No Save] (NO)
1 [Save to RAM] (RAM)
2 [Save to EEPROM] (EEP)
STS 0 [Not Supported] (UNSP)
1 [Active] (RUN)
2 [Not Active] (STP)
3 [Error] (ERR)
STT 0 [On Ramp] (RMP)
1 [Fast stop] (FST)
2 [Freewheel Stop] (NST)
3 [DC injection] (DCI)
STUN 0 [Default] (TAB)
1 [Measure] (MEAS)
2 [Custom] (CUS)
STV 0 [Not Supported] (UNSP)
1 [Pending] (PEND)
2 [Error] (ERR)
3 [Done] (DONE)
SUCU 0 [Euro] (EURO)
1 [$] (DOLLAR)
2 [£] (POUND)
3 [Krone] (KR)
4 [Renminbi] (RMB)
5 [Other] (OTHER)
SUFR 0 [1 L/s] (1LS)
1 [0.1 l/s] (01LS)
2 [1 L/mn] (1LM)
3 [1 L/h] (1LH)
4 [1 dm3/mn] (1DM3M)
5 [1 m3/s] (1M3S)
6 [0.1 m3/s] (01M3S)
7 [1 m3/mn] (1M3MN)
8 [0.1 m3/mn] (01M3MN)
9 [1 m3/h] (1M3H)
10 [0.1 m3/h] (01M3H)

# Internal
 11 [1 gal/s] (1GPS)
12 [1 GPM] (1GPM)
13 [1 gal/h] (1GPH)
14 [1 ft3/s] (1CFS)
15 [1 CFM] (1CFM)
16 [1 SCFM] (1SCFM)
17 [1 ft3/h] (1CFH)
18 [1 Kg/s] (1KGS)
19 [1 Kg/mn] (1KGM)
20 [1 Kg/h] (1KGH)
21 [1 Lb/s] (1LBS)
22 [1 Lb/mn] (1LBM)
23 [1 Lb/h] (1LBH)
24 [0.1 %] (01PC)
25 [0.1] (01WO)
SUPR 0 [1 Kpa] (1KPA)
1 [1 mbar] (1MBAR)
2 [1 Bar] (1BAR)
3 [0.1 Bar] (01BAR)
4 [0.01 Bar] (001BAR)
5 [1 Psi] (1PSI)
6 [0.1 Psi] (01PSI)
7 [1 Psig] (1PSIG)
8 [0.1 Psig] (01PSIG)
9 [1 inH2O] (1INH20)
10 [1 inWg] (1INWG)
11 [1 inWC] (1INWC)
12 [1 ftWg] (1FTWG)
13 [1 ftWc] (1FTWC)
14 [1 ft] (1FT)
15 [1 mWg] (1MWG)
16 [0.1 mWg] (01MWG)
17 [1 mWC] (1MWC)
18 [0.1 mWc] (01MWC)
19 [1 m] (1M)
20 [0.1 m] (01M)
21 [1 inHg] (1INHG)
22 [0.1 %] (01PC)
23 [0.1] (01WO)
SUTP 0 [0.1°C] (01C)
1 [0.1°F] (01F)
2 [0.1 %] (01PC)
3 [0.1] (01WO)
TBR 4 [Automatic] (AUTO)
8 [300 bps] (300)
12 [600 bps] (600)
16 [1.2 Kbps] (1200)
20 [2.4 Kbps] (2400)
24 [4800 bps] (4800)
28 [9600 bps] (9600)
30 [10 Kbps] (10000)
32 [19200 bps] (19200)
34 [20 Kbps] (20000)
35 [28.8 Kbps] (28800)
36 [38.4 Kbps] (38400)
37 [45.45 Kbps] (45450)
38 [50 Kbps] (50000)
40 [57.6 Kbps] (57600)
41 [76.8 Kbps] (76800)
42 [93.75 Kbps] (93750)
44 [100 Kbps] (100K)

# Internal
 48 [115.2 Kbps] (115K2)
52 [125 Kbps] (125K)
53 [156 Kbps] (156K)
54 [187.5 Kbps] (187K5)
56 [230.4 Kbps] (230K4)
60 [250 Kbps] (250K)
64 [460.8 Kbps] (460K8)
68 [500 Kbps] (500K)
69 [625 Kbps] (625K)
70 [800 Kbps] (800K)
72 [921.6 Kbps] (921K6)
76 [1 Mbps] (1M)
80 [1.5 Mbps] (1M5)
81 [2.5 Mbps] (2M5)
82 [3 Mbps] (3M)
83 [6 Mbps] (6M)
84 [10 Mbps] (10M)
86 [5 Mbps] (5M)
88 [12 Mbps] (12M)
92 [100 Mbps] (100M)
TCC 0 [2-Wire Control] (2C)
1 [3-Wire Control] (3C)
TCT 0 [Level] (LEL)
1 [Transition] (TRN)
2 [Level With Fwd Priority] (PFO)
THT 0 [No] (NO)
1 [Self cooled] (ACL)
2 [Force-cool] (FCL)
TOCT 0 [Not Available] (NA)
1 [PRESSURE] (PRESS)
2 [FLOW] (FLOW)
3 [OTHER] (OTHER)
TQNC 0 [Expert] (OPTI)
1 [Nameplate] (NAMP)
TUNT 2 [Standard] (STD)
3 [Rotation] (ROT)
TUNU 0 [No] (NO)
1 [Therm mot] (TM)
TWO 0 [OFF] (LOW)
1 [ON] (HIGH)
ULR 0 [Permitted] (ULR0)
1 [Not allowed] (ULR1)
URES 20 [200 Vac] (200)
22 [220 Vac] (220)
23 [230 Vac] (230)
24 [240 Vac] (240)
38 [380 Vac] (380)
40 [400 Vac] (400)
44 [440 Vac] (440)
46 [460 Vac] (460)
48 [480 Vac] (480)
50 [500Vac] (500)
52 [525 Vac] (525)
57 [575 Vac] (575)
60 [600 Vac] (600)
69 [690 Vac] (690)
USB 0 [Error Triggered] (0)
1 [Error Triggered w/o Relay] (1)
2 [Warning Triggered] (2)
VCAL 0 [Unknown Voltage] (NO)
1 [100-120(1)] (110M)

# Internal
 2 [100-120(3)] (110T)
3 [200-240 V single] (220M)
4 [200-240 V Three] (220T)
5 [380-500(1)] (480M)
6 [380-500 V Three] (480T)
7 [500-690(1)] (690M)
8 [500-690 V Three] (690T)
9 [600(1)] (600M)
10 [600 V Three] (600T)
VCCS 0 [Not Configured] (NONE)
1 [Inactive] (NACT)
2 [Pending] (WATCH)
3 [Running] (CTRL)
4 [Runs With Warning] (ALARM)
5 [Error] (FAULT)
VCLM 0 [Preset Curve Mode] (PSET)
1 [Learnt Curve Mode] (LEARN)
VCLS 0 [Not Configured] (NONE)
1 [Preset Value Mode] (PSET)
2 [Inactive] (NACT)
3 [Pending] (PEND)
4 [Running] (RUN)
5 [Error] (FAIL)
6 [Succeeded] (DONE)
WUPM 0 [Feedback] (FBK)
1 [Error] (ERR)
2 [Pressure] (LP)

# Internal
Description
Not done
Test is pending
Test in progress
Error detected
Autotuning Done
No action
Apply autotuning
Erase autotuning
No DC injection
DC injection
Continuous DC injection
Not active
Fallback to channel 1
Fallback to channel 2
Uninterrupted fallback to channel 1
Uninterrupted fallback to channel 2
Positive only
Positive and negative
Voltage
Current
AI bipolar volts selected
PTC
KTY
PT1000
PT100
Water Prob
3 PT1000
3 PT100
PT1000 in 3 wires
PT100 in 3 wires
3 PT1000 in 3 wires
3 PT100 in 3 wires
No warning stored
Fallback frequency reaction
Speed maintained
Type of stop
Reference frequency warning
Life cycle warning 1
Life cycle warning 2
Dry run warning
Low flow warning
High flow warning
Inlet pressure warning
Outlet pressure low warning
Outlet pressure high warning
Pump cycle warning
Anti-Jam warning
Pump low flow
Low pressure warning
Flow limit activated
PID error warning
PID feedback warning
PID high feedback warning
PID low feedback warning
Regulation warning
AI2 thermal sensor warning
AI3 thermal sensor warning
AI4 thermal sensor warning
AI5 thermal sensor warning
AI1 4-20 loss warning

# Internal
AI2 4-20 loss warning
AI3 4-20 loss warning
AI4 4-20 loss warning
AI5 4-20 loss warning
Device thermal state warning
IGBT thermal warning
Fan counter warning
Fan feedback warning
External error warning
Undervoltage warning
Preventive undervoltage active
Drive in forced run
Motor frequency high threshold reached
Motor frequency low threshold reached
Motor frequency low threshold 2 reached
High speed reached
Reference frequency high threshold reached
Reference frequency low threshold reached
2nd frequency threshold reached
Current threshold reached
Low current threshold reached
High torque warning
Low torque warning
Process underload warning
Process overload warning
Device thermal threshold reached
Motor thermal threshold reached
Power high threshold reached
Power low threshold reached
Customer warning 1
Customer warning 2
Customer warning 3
Customer warning 4
Customer warning 5
AFE Mains undervoltage
Power Consumption warning
Output pressure high switch warning
Ethernet Internal warning
Multi-Pump available capacity warning
Lead pump not available
High level warning
Low level warning
Level switch warning
Monitoring circuit A warning
Monitoring circuit B warning
Monitoring circuit C warning
Monitoring circuit D warning
Cabinet circuit A warning
Cabinet circuit B warning
Cabinet circuit C warning
Motor winding A warning
Motor winding B warning
Motor bearing A warning
Motor bearing B warning
Circuit breaker warning
Cabinet I/O 24V missing warning
Fieldbus communication loss fallback channel is active
AFE motor limitation
AFE generator limitation
AFE sensor thermal state
AFE IGBT thermal state

# Internal
Cabinet fan feedback warning
Cabinet fan counter warning
Cabinet overheat warning
CMI jumper warning
AFE fan counter warning
AFE fan feedback warning
Multipump device warning
Temperature sensor AI2 warning
Temperature sensor AI3 warning
Temperature sensor AI4 warning
Temperature sensor AI5 warning
DC bus ripple warning
Vortex control warning
Cooling pump warning
Module overheat warning
ON lock warning
Internal error 22 (Embedded Ethernet)
Modbus communication interruption warning
Running
Stop
Local mode is active
Channel 2 active
Manual mode is active
PID active
Anti-Jam is in progress
Flow limit In progress
PipeFill is in progress
Jockey pump is active
Boost is in progress
Sleep mode is active
Priming pump is active
Inlet pressure Compensation is in progress
Undefined
Vortex control learning in progress
Vortex control active
Generic pump Control
Pump level control application
Pump booster control application
Generic fan control application
Pulse Signal injection
Pulse Signal injection - Optimized
Rotational current injection
NO alignment
No
Yes
+/- 8192
+/- 100%
Not configured
Inactive
Running
Stage Pending
Destage pending
Staging
Destage in progress
Baud rate 50kbps
Baud rate 125kbps
Baud rate 250kbps
Baud rate 500kbps
Baud rate 1Mbps
50Hz motor frequency
60Hz motor frequency

# Internal
Stop on switching
Bumpless
Disabled
Inactive
Dynamic
Static
Constant
No
Yes
High torque
Speed
Feedback
Speed+Flow
Feedback+Flow
Energy Optimized

Standard ref template

Pedestal at LSP
Deadband at LSP
Deadband at 0 speed
No warning clearing
Clear Event 1 warning
Clear Event 2 warning
Clear Event 3 warning
Clear Event 4 warning
Clear Event 5 warning
Circuit breaker not configured
Circuit breaker configuration invalid
Circuit breaker in start pulse
Circuit breaker not closed
Circuit breaker open
Circuit breaker in stop pulse
Circuit breaker not open
Circuit breaker closed
Circuit breaker stop is disable
Error
warning
Not Configured
Counter
Date and time
Mains or Control Supply ON
Mains Supply ON
Drive in running State
Terminal block
Local HMI
Modbus communication
CANopen communication
Ext. communication module
Ethernet
Not Assigned
Parameter set 1
Parameter set 2
Parameter set 3
Combined channel mode
Separated channel mode
I/O mode
No
warning
Error

# Internal
Warning then error with time delay
0.001
0.01
0.1
1
10
20/70
21/71
100/101
Unconfigured
Parameters list
PID feedback trend view
Outlet pressure trend view
Inlet pressure trend view
Installation flow trend view
In progress
Configuration 0 active
Terminal block
Local HMI
Modbus communication 1
Terminal block + HMI panel
CANopen communication
Ext. communication module
Ethernet option module
PC tool
Measured
Computed
R0T0
R0T1
R1T0
R1T1
No copy
Copy reference frequency
Copy command
Copy command & reference frequency
Not assigned
Analog output AQ1
Analog output AQ2
Reference frequency 1
Reference frequency 2
Reference frequency 2 Summing
PI controller feedback
Subtract reference frequency 2
Manual PID reference
PID reference frequency
Reference frequency 3 Summing
Reference frequency 1B
Subtract reference frequency 3
Forced loc mode channel
Reference frequency 2 multiplier
Reference frequency 3 multiplier
Virtual AI1 channel
Virtual AI2 Channel
Virtual AI3 Channel
External feed forward
Intlet pressure sensor source
Outlet pressure sensor source
Installation flow sensor source
Pump flow sensor source
Level Control sensor
No

# Internal
Preset speed 1
Preset speed 2
PID reference frequency 1
PID reference frequency 2
Increase speed
Decrease speed
No
Relay R2
Relay R3
Relay R4
Relay R5
Relay R6
DQ11 digital output
DQ12 digital output
VSP
Relay R60
Relay R61
Relay R62
Relay R63
Relay R64
Relay R65
Relay R66
U/F VC Standard motor law
U/F VC 5 point voltage/frequency
U/F VC Quadratic
SYN_U VC law
U/F VC Energy Sav.
Reluctance motor
Ignore monitoring
Warning triggered
Error triggered
Drive Locked
Drive unlocked
Download not allowed
Combined Lock/Unlock
Drive freewheel stop
Ramp stop
Master 1
Master 2
Normal duty
High duty
No
Switch
Power
5 minutes
10 minutes
30 minutes
1 hour
2 hours
3 hours
Unlimited
Ignore
Freewheel stop
Per STT
Fallback speed
Speed maintained
Ramp stop
Fast stop
DC injection
No error
Server timeout

# Internal
Server no file
Server corrupt file
Server empty file
Device invalid file
CRC error
Version incompatibility
Device no file
Server reading Size
Device opening file
Device reading file
Incompatibility
Device invalid name
Server incorrect file size
Device writing file
Server writing file
KW counter
Instantaneous kW trend
Daily kWh report
Weekly kWh report
Monthly kWh report
Yearly kWh report
No error detected
Precharge capacitor
Motor overspeed
Internal error 14 (CPU)
Channel switching detected error
Angle error
AFE ShortCircuit error
IGBT short circuit
Overcurrent
Process overload
Motor short circuit
Motor short circuit
Ground short circuit
Motor overload
Supply mains overvoltage
Supply mains undervoltage
Input phase loss
AFE Bus unbalancing
Single output phase loss
DC bus overvoltage
Output phase loss
Input Overheating
Device overheating
IGBT overheating
Fan feedback error
Module overheat error
AI2 thermal level error
AI3 thermal level error
AI4 thermal level error
AI5 thermal level error
Cooling pump error
Output contactor closed error
Output contactor opened error
input contactor
Idle mode exit error
Internal error 8 (Switching Supply)
Internal error 10 (Mains)
Internal error 9 (Measure)
Internal error 11 (Temperature)
Internal error 12 (Internal current supply)

# Internal
Internal error 13 (Diff current)
Internal error 15 (Flash)
Control memory error
Power memory error
Internal communication interruption with option module
Internal error 1 (Rating)
Internal error 2 (Soft)
Internal error 3 (Intern Comm)
Internal error 4 (Manufacturing)
Internal error 7 (Init)
Internal error 6 (Option)
Boards compatibility
Internal error 0 (IPC)
Internal error 21 (RTC)
Internal error 22 (Embedded Ethernet)
Internal error 25 (Incompatibility CB & SW)
Internal error 20 (option interface PCBA)
Internal error 27 (Diagnostics CPLD)
Monitoring circuit A error
Monitoring circuit B error
Monitoring circuit C error
Monitoring circuit D error
Cabinet circuit A error
Cabinet circuit B error
Cabinet circuit C error
Motor winding A error
Motor winding B error
Motor bearing A error
Motor bearing B error
Cabinet overheat error
AFE Mains undervoltage
Internal error 31 (Missing brick)
Internal error 29 (Inverter)
Internal error 30 (Rectifier)
AFE IGBT over-heat error
AFE contactor feedback error
AFE DC-capacitors error
AFE current control error
Mains frequency out of range
AFE Line filter error
Incorrect configuration
Invalid configuration
Configuration transfer error
Pre-settings transfer error
Circuit breaker error
Internal error 16 (IO module - relay)
Internal error 17 (IO module - Standard)
Firmware Update error
Motor stall detected error
AI2 4-20mA loss
AI3 4-20mA loss
AI4 4-20mA loss
AI5 4-20 mA loss
AI1 4-20 mA loss
Thermal sensor error on AI2
Thermal sensor error on AI3
Thermal sensor error on AI4
Thermal sensor error on AI5
Program loading detected error
Program running detected error
PID feedback detected error

# Internal
Modbus communication interruption
HMI communication interruption
Fieldbus communication interruption
PC communication interruption
Embedded Ethernet communication interruption
Security files corrupt
CANopen communication interruption
Internal error 23 (Module link)
External detected error
External error detected by Fieldbus
FDR Eth embedded error
FDR Eth module error
Autotuning detected error
Process underload
Safety function detected error
Pump cycle start error
Inlet pressure detected error
Pump low flow detected error
Anti Jam detected error
Dry run detected error
Outlet pressure low
High flow error
Outlet pressure high
Vortex control error
ON lock error
Lead pump not available
Low level error
High level error
Internal error 28 (AFE)
MultiDrive Link error
Multipump device error
Cabinet I/O 24V missing error
DC Bus ripple error
Advanced function locked error
No
Recall customer parameter set 0
Recall customer parameter set 1
Recall customer parameter set 2
Recall customer parameter set 3
Recall default parameter set
Recall OEM default parameter set
Macro configuration
Configuration 1
Configuration 2
Config 3
NOT ACTIVE
SAVE
REST
Pump characteristics disabled
Enable Head vs flow curve
Activate power vs flow curve
Standard
Always
Never
Economy
Inactive
Display
Compensation
Not configured
Yes on freewheel
Yes always

# Internal
8bit odd parity 1stop bit
8 bits even parity 1 stop bit
8bit no parity 1stop bit
8bit no parity 2stop bits
No error
Lock error
Package error
Package compatibility error
Ask error
Reset device error
Configuration saving warning
Conf loading warning
Post Script warning
Package Description error
Package not found
Power Supply error
Boot M3 error
Boot C28 error
M3 error
C28 error
CPLD error
Boot power error
Embedded ethernet boot error
Embedded ethernet error
Embedded ethernet WebServer error
Module ethernet boot error
Module ethernet error
Module ethernet WebServer error
Password enabled
Flash error
Package error
Wait
Firmware update inactive
Power update in progress
Power update pending
Firmware update ready
Firmware update inactive
Firmware update succeded
Update error
Firmware update in progress
Firmware update requested
Transfer In Progress
Transfer Done
Package cleared
Firmware update succeded with warnings
Device state error
Package error
Saving current configuration
Post Script
Drive automatic tuning
DC injection
Ready
Freewheel stop
Running
Accelerating
Decelerating
In current limitation
Fast stop
No mains voltage
Control stopping
Dec ramp adaptation

# Internal
Output cut
Undervoltage warning
TC mode active
In autotest
Autotest error
Autotest OK
EEprom test
Operating state "Fault"
DCP Flashing mode
STO active
Energy Saving
Firmware Update
AFE Mains undervoltage
Always active
Ready and Run state
Run state
Disabled
Forced Run in forward direction
Forced Run in reverse direction
hundredths of seconds
Tenths of seconds
seconds
Idle State
Init
Configuration
Ready
Operational
Not Configured
Unrecoverable error
Fixed address
BOOTP
DHCP
DCP
NO
warning
Compensation
No
Start
Time
Torque
Basic access
Standard access
Expert access
Services
Deactivated
Filling mode
Emptying mode
Level switches
Level sensor
Pressure sensor
All pumps stopped simultaneously
Each pump stopped individually
Not configured
Inactive
Filling in progress
Emptying in progress
Low level
High level
Switches
Standard
Energy Optimized

# Internal
Distribution logging disable
Motor frequency
Motor current
Motor speed
Motor voltage
Motor mechanical power
Input Electrical power
Output Electrical power
Motor torque
Mains Voltage
DC BUS Voltage
PID feedback
AI2 thermal value
AI3 thermal value
AI4 thermal value
AI5 thermal value
Drive Thermal State
Motor Thermal State
Installation flow
Pump flow
Inlet pressure
Outlet pressure
Energy consumption indicator
Pump efficiency
Energy Performance Indicator
Mains current
Input reactive power
Input power factor
AI1 thermal value
DBR thermal state
Stop
Start
Always
Reset
Clear
Error
200 ms
1 second
2 seconds
5 seconds
No error detected
Control memory error
Incorrect configuration
Invalid configuration
Modbus communication interruption
Internal communication interruption with option module
Fieldbus communication interruption
External detected error
Overcurrent
Precharge capacitor
AI2 4-20mA loss
Input Overheating
Device overheating
Motor overload
DC bus overvoltage
Supply mains overvoltage
Single output phase loss
Input phase loss
Supply mains undervoltage
Motor short circuit
Motor overspeed

# Internal
Autotuning detected error
Internal error 1 (Rating)
Internal error 2 (Soft)
Internal error 3 (Intern Comm)
Internal error 4 (Manufacturing)
Power memory error
Ground short circuit
Output phase loss
CANopen communication interruption
Internal error 7 (Init)
External error detected by Fieldbus
Internal error 8 (Switching Supply)
PC communication interruption
HMI communication interruption
Internal error 9 (Measure)
Internal error 10 (Mains)
Internal error 11 (Temperature)
IGBT overheating
IGBT short circuit
Motor short circuit
Output contactor closed error
Output contactor opened error
Internal error 12 (Internal current supply)
input contactor
Internal error 6 (Option)
Internal error 14 (CPU)
AI3 4-20mA loss
AI4 4-20mA loss
Boards compatibility
Configuration transfer error
AI5 4-20 mA loss
Fan feedback error
Module overheat error
ON lock error
Channel switching detected error
Process underload
Process overload
Angle error
AI1 4-20 mA loss
Safety function detected error
AI2 thermal level error
Thermal sensor error on AI2
AI3 thermal level error
Thermal sensor error on AI3
Pump cycle start error
Outlet pressure low
High flow error
Inlet pressure detected error
Pump low flow detected error
AI4 thermal level error
Thermal sensor error on AI4
AI5 thermal level error
Thermal sensor error on AI5
Anti Jam detected error
Outlet pressure high
Dry run detected error
PID feedback detected error
Program loading detected error
Program running detected error
Lead pump not available
Low level error

# Internal
High level error
Internal error 16 (IO module - relay)
Internal error 17 (IO module - Standard)
Internal error 0 (IPC)
Internal error 13 (Diff current)
Motor stall detected error
Internal error 21 (RTC)
Embedded Ethernet communication interruption
Internal error 15 (Flash)
Firmware Update error
Internal error 22 (Embedded Ethernet)
Internal error 25 (Incompatibility CB & SW)
Internal error 20 (option interface PCBA)
Internal error 27 (Diagnostics CPLD)
Internal error 23 (Module link)
AFE ShortCircuit error
AFE Bus unbalancing
Internal error 28 (AFE)
Monitoring circuit A error
Monitoring circuit B error
Monitoring circuit C error
Monitoring circuit D error
Cabinet circuit A error
Cabinet circuit B error
Cabinet circuit C error
Motor winding A error
Motor winding B error
Motor bearing A error
Motor bearing B error
Cabinet overheat error
AFE Mains undervoltage
Internal error 31 (Missing brick)
Internal error 29 (Inverter)
Internal error 30 (Rectifier)
AFE IGBT over-heat error
AFE contactor feedback error
Pre-settings transfer error
Circuit breaker error
MultiDrive Link error
Multipump device error
AFE DC-capacitors error
AFE current control error
Mains frequency out of range
FDR Eth embedded error
FDR Eth module error
Cabinet I/O 24V missing error
DC Bus ripple error
Vortex control error
Idle mode exit error
Security files corrupt
AFE Line filter error
Cooling pump error
Advanced function locked error
Warning
Error
Warning then error with time delay
Digital values
Bar graph
List of values
Vu Meter
Nominal motor power

# Internal
Nominal motor cosinus Phi
Slave
Master
Master only
Master or slave
Deactivated
Standard alternation
Redundancy mode
First In First Out
Last In First Out
Pump runtime
Runtime&Last In First Out
None
Ready
Running
warning
Error
Not available
Mono-Pump
Single Drive
Multiple Drives
Multiple Drives with Master redundancy
Standard multipump speed control mode
Distributed multipump speed control mode
Advanced multipump speed control mode
Synchronized multipump speed control mode
Unknown rating
0.10kW - 0.2HP
0.18 kW / 0.25 Hp
0.25kW - 0.37HP
0.37 kW / 0.5 Hp
0.55 kW / 0.75 Hp
0.75 kW / 1 Hp
5.5kW - 7.5HP
1.1 kW / 1.5 Hp
1.5 kW / 2 Hp
1.85kW - 3HP
2.2 kW / 3 Hp
3 kW / 4HP
3.7kW - 5HP
4kW - 5HP
5.5 kW / 7.5 Hp
7.5 kW / 10 Hp
9kW - 11HP
11 kW / 15 HP
15 kW / 20 HP
18.5kW - 25HP
22kW - 30HP
30kW - 40HP
37kW - 50HP
45kW - 60HP
55kW - 75HP
75kW - 100HP
90kW - 125HP
110kW - 150HP
132kW - 200HP
160kW - 250HP
200kW - 300HP
220kW - 350HP
250kW - 400HP
280kW - 450HP

# Internal
315kW - 500HP
355kW - 450HP
400kW - 600HP
450kW - 750HP
500kW - 800HP
560kW - 850HP
630kW -900HP
710kW -950HP
800kW - 1000HP
900kW - 900HP
1000kW - 1000HP
1100kW - 1100HP
1200kW - 1200HP
1300kW - 1300HP
1400kW - 1400HP
1500kW - 1500HP
1600kW - 1600HP
1700kW - 1700HP
1800kW - 1800HP
1900kW - 1900HP
2000kW - 2000HP
2100kW - 2100HP
2200kW - 2200HP
2300kW - 2300HP
2400kW - 2400HP
2500 kW / 3333 Hp
2600 kW / 3467 Hp
On boot up
Stopped
Operational
Pre operation
High level
Low level
No
Yes
No
Yes
Optimized
Function inactive
OPF error Triggered
No error triggered
No
Switch
Sensor
Both
Default
Full
Pump characteristics disabled
Enable Head vs flow curve
Enable power vs flow curve
Enable Head vs flow and power vs flow curves
Pump cycle monitoring disabled
Pump cycle monitoring mode 1
Pump cycle monitoring mode 2
None
Inactive
Active
Failed
No
Pipe-Fill on PID feedback
Pipe-Fill on Outlet pressure

# Internal
A - B - C phase rotation
A - C - B phase rotation
Product package
Module package
Spare parts package
Customized package
Indus package
No
SW
Q
QN
NF
Parameters list
Operating time histogram
Nb of Starts histogram
Efficiency trend view
Power vs flow curve
Head vs flow curve
Efficiency vs flow curve
None
Pump 1
Pump 2
Pump 3
Pump 4
Pump 5
Pump 6
Not configured
1
100
101
102
106
107
Not configured
AI1 Analog input
AI2 Analog input
AI3 Analog input
AI4 Analog input
AI5 Analog input
Motor current
Motor frequency
Ramp output
Motor torque
Signed torque
Signed ramp
PID reference
PID feedback
PID error
PID output
Motor power
Motor thermal state
Drive thermal state
Reference frequency via DI
Local HMI
Reference frequency via Modbus
Reference frequency via CANopen
Reference frequency via Com module
Embedded Ethernet
Signed output frequency
Motor voltage
AI Virtual 1

# Internal
AI Virtual 2
AI Virtual 3
DI5 pulseInput assignment
DI6 pulseInput assignment
Estimated pump flow
Inlet pressure value
Outlet pressure value
Installation flow value
Estimated pump system flow
Estimated pump head
Estimated pump delta pressure
Estimated pump system delta pressure
External mixing valve
Not assigned
Device in operating state "Fault"
Device running
Ouput contactor control
Motor frequency high threshold reached
High speed reached
Current threshold reached
Reference frequency reached
Motor thermal threshold reached
PID error warning
PID feedback warning
AI2 4-20 Loss warning
Motor frequency high threshold 2 reached
Device thermal threshold reached
Reference frequency high threshold reached
Reference frequency low threshold reached
Motor frequency low threshold reached
Motor frequency low threshold 2 reached
Low current threshold reached
Process underload warning
Process overload warning
PID high feedback warning
PID low feedback warning
Regulation warning
Forced Run
High torque warning
Low torque warning
Run forward
Run reverse
Ramp switching
HMI local/remote command
Negative torque
Configuration 0 active
Parameter set 1 active
Parameter set 2 active
Parameter set 3 active
Parameter set 4 active
DC bus charged
Power Removal state
Mains contactor control
I present
Warning group 1
Warning group 2
Warning group 3
External error warning
Undervoltage warning
Preventive undervoltage active
Device thermal state warning

# Internal
AFE Mains undervoltage
Reference frequency channel 1
Reference frequency channel 2
Command channel 1
Command channel 2
Command ch = ch 1B
IGBT thermal warning
AI3 4-20 Loss warning
AI4 4-20 Loss warning
Flow limit active
Graphic display terminal function key 1
Graphic display terminal function key 2
Graphic display terminal function key 3
Graphic display terminal function key 4
AI1 4-20 loss warning
Ready
Yes
Digital input 1
Digital input 2
Digital input 3
Digital input 4
Digital input 5
Digital input 6
Digital input 11
Digital input 12
Digital input 13
Digital input 14
Digital input 15
Digital input 16
Bit 0 digital input ctrl word
Bit 1 digital input ctrl word
Bit 2 digital input ctrl word
Bit 3 digital input ctrl word
Bit 4 digital input ctrl word
Bit 5 digital input ctrl word
Bit 6 digital input ctrl word
Bit 7 digital input ctrl word
Bit 8 digital input ctrl word
Bit 9 digital input ctrl word
Bit10 digital input ctrl word
Bit11 digital input ctrl word
Bit12 digital input ctrl word
Bit13 digital input ctrl word
Bit14 digital input ctrl word
Bit15 digital input ctrl word
Bit 0 Modbus ctrl word
Bit 1 Modbus ctrl word
Bit 2 Modbus ctrl word
Bit 3 Modbus ctrl word
Bit 4 Modbus ctrl word
Bit 5 Modbus ctrl word
Bit 6 Modbus ctrl word
Bit 7 Modbus ctrl word
Bit 8 Modbus ctrl word
Bit 9 Modbus ctrl word
Bit 10 Modbus ctrl word
Bit 11 Modbus ctrl word
Bit 12 Modbus ctrl word
Bit 13 Modbus ctrl word
Bit 14 Modbus ctrl word
Bit 15 Modbus ctrl word

# Internal
Bit 0 CANopen ctrl word
Bit 1 CANopen ctrl word
Bit 2 CANopen ctrl word
Bit 3 CANopen ctrl word
Bit 4 CANopen ctrl word
Bit 5 CANopen ctrl word
Bit 6 CANopen ctrl word
Bit 7 CANopen ctrl word
Bit 8 CANopen ctrl word
Bit 9 CANopen ctrl word
Bit 10 CANopen ctrl word
Bit 11 CANopen ctrl word
Bit 12 CANopen ctrl word
Bit 13 CANopen ctrl word
Bit 14 CANopen ctrl word
Bit 15 CANopen ctrl word
Bit 0 Com module ctrl word
Bit 1 Com module ctrl word
Bit 2 Com module ctrl word
Bit 3 Com module ctrl word
Bit 4 Com module ctrl word
Bit 5 Com module ctrl word
Bit 6 Com module ctrl word
Bit 7 Com module ctrl word
Bit 8 Com module ctrl word
Bit 9 Com module ctrl word
Bit 10 Com module ctrl word
Bit 11 Com module ctrl word
Bit 12 Com module ctrl word
Bit 13 Com module ctrl word
Bit 14 Com module ctrl word
Bit 15 Com module ctrl word
Bit 0 Eth embd ctrl word
Bit 1 Eth embd ctrl word
Bit 2 Eth embd ctrl word
Bit 3 Eth embd ctrl word
Bit 4 Eth embd ctrl word
Bit 5 Eth embd ctrl word
Bit 6 Eth embd ctrl word
Bit 7 Eth embd ctrl word
Bit 8 Eth embd ctrl word
Bit 9 Eth embd ctrl word
Bit 10 Eth embd ctrl word
Bit 11 Eth embd ctrl word
Bit 12 Eth embd ctrl word
Bit 13 Eth embd ctrl word
Bit 14 Eth embd ctrl word
Bit 15 Eth embd ctrl word
Digital input DI1 (low level)
Digital input DI2 (low level)
Digital input DI3 (low level)
Digital input DI4 (low level)
Digital input DI5 (low level)
Digital input DI6 (low level)
Digital input DI11 (low level)
Digital input DI12 (low level)
Digital input DI13 (low level)
Digital input DI14 (low level)
Digital input DI15 (low level)
Digital input DI16 (low level)
Digital input DI50 (High level)

# Internal
Digital input DI51 (High level)
Digital input DI52 (High level)
Digital input DI53 (High level)
Digital input DI54 (High level)
Digital input DI55 (High level)
Digital input DI56 (High level)
Digital input DI57 (High level)
Digital input DI58 (High level)
Digital input DI59 (High level)
Digital input DI50 (low level)
Digital input DI51 (low level)
Digital input DI52 (low level)
Digital input DI53 (low level)
Digital input DI54 (low level)
Digital input DI55 (low level)
Digital input DI56 (low level)
Digital input DI57 (low level)
Digital input DI58 (low level)
Digital input DI59 (low level)
DC bus ripple warning
Modbus communication interruption warning
Jockey
Priming
Anti-Jam active
Pipe Fill
Priming pump active
Dry run warning
Pump low flow
Process high flow warning
Inlet pressure warning
Outlet pressure low warning
Outlet pressure high warning
Pump cycle warning
Anti-Jam warning
Low flow warning
Low pressure warning
Output pressure high switch warning
Jockey pump active
Pump 1 command
Pump 2 command
Pump 3 command
Pump 4 command
Pump 5 command
Pump 6 command
Multi-Pump available capacity warning
Lead pump not available
High level warning
Low level warning
Level switch warning
Multipump device warning
Multi-pump master activated
Device in ready or running state
Device in energy saving or ready state
Device in energy saving or ready or running state
Device in energy saving state
Internal error 22 (Embedded Ethernet)
Vortex control running
Vortex control warning
Temperature sensor AI2 warning
Temperature sensor AI3 warning
Temperature sensor AI4 warning

# Internal
Temperature sensor AI5 warning
Customer warning 5
Cabinet fan command
Circuit breaker start pulse
Circuit breaker stop pulse
Power Consumption warning
Warning group 4
Warning group 5
Fallback speed
Speed maintained
Per type of stop
Life cycle warning 1
Life cycle warning 2
AI2 thermal sensor warning
AI3 thermal sensor warning
AI4 thermal sensor warning
AI5 thermal sensor warning
AI5 4-20 Loss warning
Fan counter warning
Fan feedback warning
Power high threshold
Power low threshold
Customer warning 1
Customer warning 2
Customer warning 3
Customer warning 4
Not assigned
AI1 4-20 loss warning
AI2 4-20 Loss warning
AI3 4-20 Loss warning
AI4 4-20 Loss warning
AI5 4-20 Loss warning
Device in operating state "Fault"
Reference frequency channel 1
Reference frequency channel 2
Command ch = ch 1B
Command channel 1
Command channel 2
Yes
Motor frequency high threshold reached
Motor frequency high threshold 2 reached
Motor frequency low threshold reached
Motor frequency low threshold 2 reached
Digital input 1
Digital input 2
Digital input 3
Digital input 4
Digital input 5
Digital input 6
Digital input 11
Digital input 12
Digital input 13
Digital input 14
Digital input 15
Digital input 16
Digital input DI1 (low level)
Digital input DI2 (low level)
Digital input DI3 (low level)
Digital input DI4 (low level)
Digital input DI5 (low level)
Digital input DI6 (low level)

# Internal
Digital input DI11 (low level)
Digital input DI12 (low level)
Digital input DI13 (low level)
Digital input DI14 (low level)
Digital input DI15 (low level)
Digital input DI16 (low level)
Bit 0 digital input ctrl word
Bit 1 digital input ctrl word
Bit 2 digital input ctrl word
Bit 3 digital input ctrl word
Bit 4 digital input ctrl word
Bit 5 digital input ctrl word
Bit 6 digital input ctrl word
Bit 7 digital input ctrl word
Bit 8 digital input ctrl word
Bit 9 digital input ctrl word
Bit10 digital input ctrl word
Bit11 digital input ctrl word
Bit12 digital input ctrl word
Bit13 digital input ctrl word
Bit14 digital input ctrl word
Bit15 digital input ctrl word
Bit 1 Modbus ctrl word
Bit 2 Modbus ctrl word
Bit 3 Modbus ctrl word
Bit 4 Modbus ctrl word
Bit 5 Modbus ctrl word
Bit 6 Modbus ctrl word
Bit 7 Modbus ctrl word
Bit 8 Modbus ctrl word
Bit 9 Modbus ctrl word
Bit 10 Modbus ctrl word
Bit 11 Modbus ctrl word
Bit 12 Modbus ctrl word
Bit 13 Modbus ctrl word
Bit 14 Modbus ctrl word
Bit 15 Modbus ctrl word
Bit 1 CANopen ctrl word
Bit 2 CANopen ctrl word
Bit 3 CANopen ctrl word
Bit 4 CANopen ctrl word
Bit 5 CANopen ctrl word
Bit 6 CANopen ctrl word
Bit 7 CANopen ctrl word
Bit 8 CANopen ctrl word
Bit 9 CANopen ctrl word
Bit 10 CANopen ctrl word
Bit 11 CANopen ctrl word
Bit 12 CANopen ctrl word
Bit 13 CANopen ctrl word
Bit 14 CANopen ctrl word
Bit 15 CANopen ctrl word
Bit 1 Com module ctrl word
Bit 2 Com module ctrl word
Bit 3 Com module ctrl word
Bit 4 Com module ctrl word
Bit 5 Com module ctrl word
Bit 6 Com module ctrl word
Bit 7 Com module ctrl word
Bit 8 Com module ctrl word
Bit 9 Com module ctrl word

# Internal
Bit 10 Com module ctrl word
Bit 11 Com module ctrl word
Bit 12 Com module ctrl word
Bit 13 Com module ctrl word
Bit 14 Com module ctrl word
Bit 15 Com module ctrl word
Bit 1 Eth embd ctrl word
Bit 2 Eth embd ctrl word
Bit 3 Eth embd ctrl word
Bit 4 Eth embd ctrl word
Bit 5 Eth embd ctrl word
Bit 6 Eth embd ctrl word
Bit 7 Eth embd ctrl word
Bit 8 Eth embd ctrl word
Bit 9 Eth embd ctrl word
Bit 10 Eth embd ctrl word
Bit 11 Eth embd ctrl word
Bit 12 Eth embd ctrl word
Bit 13 Eth embd ctrl word
Bit 14 Eth embd ctrl word
Bit 15 Eth embd ctrl word
Digital input DI50 (High level)
Digital input DI51 (High level)
Digital input DI52 (High level)
Digital input DI53 (High level)
Digital input DI54 (High level)
Digital input DI55 (High level)
Digital input DI56 (High level)
Digital input DI57 (High level)
Digital input DI58 (High level)
Digital input DI59 (High level)
Digital input DI50 (low level)
Digital input DI51 (low level)
Digital input DI52 (low level)
Digital input DI53 (low level)
Digital input DI54 (low level)
Digital input DI55 (low level)
Digital input DI56 (low level)
Digital input DI57 (low level)
Digital input DI58 (low level)
Digital input DI59 (low level)
Pre-settings not locked
Pre-settings locked
No password defined
Password is unlocked
Password is locked
Stop key no priority
Stop key priority
Stop key priority all CMD channels
Active parameters
All parameters
Undefined
Lead pump
Lead or auxiliary fixed speed pump
Lead or auxiliary variable speed pump
Auxiliary fixed speed pump
Auxiliary variable speed pump
Error
Not configured
Not Available
Ready

# Internal
Running
Fast stop then disable voltage
Fast stop then stay in quick stop state
Auto detected
10Mbps full duplex
10Mbps half duplex
100Mbps full duplex
100Mbps half duplex
No
Yes
Absolute
No
Reset run time
Reset total run time
Reset power ON time
Reset fan counter
Reset total power ON time
Clear GTHI
Clear LTHI
Reset start counter
Reset total start counter
Clear AFE fan operation time
Clear cabinet fan operation time
Efficiency MAX
Efficiency MIN
Flow rate MAX
Flow rate MIN
Reset total quantity
Clear BRTH
Clear BRTI
Clear AFE power ON time
Clear BPTI
Clear AFE brick number of start
Clear BNSI
Clear AFE regen time
Clear BGTI
Clear BLMI
Clear BLGI
Reset all counters including service
Linear ramp
S-Ramp
U-Ramp
Ramp customized
Inactive
Terminal block + HMI panel
No
Save configuration 0
Save configuration 1
Save configuration 2
Config 3
Initialization
Not active
Operational
Ready
IP configuration
Not configured
Reading configuration
Writing configuration
Applying configuration
Switch.frequency type 1
Switch.frequency type 2

# Internal
No
Switch
Flow
Speed
Power
Pressure
Multiple
No information
Low saliency
Medium saliency
High saliency
6 µs
8 µs
10 µs
Standard
High performance
Not supported
Enabled
Disabled
Not active
Active
Error
Inactive
Maintain DC Bus
Ramp Stop
Locked in freewheel stop without error
No save
Save to RAM
Save to EEPROM
Not supported
Active
Not active
Error
On ramp
Fast stop
Freewheel stop
DC injection
Default
Measure
Custom
Not supported
Pending
Error
Done
Euro
$
£
Krone
Renminbi
Other
1 L/s
0.1 l/s
1 L/mn
1 L/h
1 dm3/mn
1 m3/s
0.1 m3/s
1 m3/mn
0.1 m3/mn
1 m3/h
0.1 m3/h

# Internal
1 gal/s
1 GPM
1 gal/h
1 ft3/s
1 CFM
1 SCFM
1 ft3/h
1 Kg/s
1 Kg/mn
1 Kg/h
1 Lb/s
1 Lb/mn
1 Lb/h
0.1 %
0.1
1 Kpa
1 mbar
1 Bar
0.1 Bar
0.01 Bar
1 Psi
0.1 Psi
1 Psig
0.1 Psig
1 inH2O
1 inWg
1 inWC
1 ftWg
1 ftWc
1 ft
1 mWg
0.1 mWg
1 mWC
0.1 mWc
1m
0.1 m
1 inHg
0.1 %
0.1
0.1°C
0.1°F
0.1 %
0.1
Automatic
300 bps
600 bps
1.2 Kbps
2.4 Kbps
4800 bps
9600 bps
10 Kbps
19200 bps
20 Kbps
28.8 Kbps
38.4 Kbps
45.45 Kbps
50 Kbps
57.6 Kbps
76.8 Kbps
93.75 Kbps
100 Kbps

# Internal
115.2 Kbps
125 Kbps
156 Kbps
187.5 Kbps
230.4 Kbps
250 Kbps
460.8 Kbps
500 Kbps
625 Kbps
800 Kbps
921.6 Kbps
1 Mbps
1.5 Mbps
2.5 Mbps
3 Mbps
6 Mbps
10 Mbps
5 Mbps
12 Mbps
100 Mbps
2-wire control
3-wire control
Level
Transition
Level with forward priority
No thermal monitoring
Self cooled motor
Force cooled motor
Not available
PRESSURE
FLOW
OTHER
Expert
Nameplate
Standard
Rotation
No
Use the motor thermal evolution
ModBus Word Order OFF
Modbus Word Order ON
Upload access allowed
Upload access not allow
200 Vac
220 Vac
230 Vac
240 Vac
380 Vac
400 Vac
440 Vac
460 Vac
480 Vac
500Vac
525 Vac
575 Vac
600 Vac
690 Vac
Error triggered
Error triggered w/o relay
Warning Triggered
Unkown voltage
100-120 V single phase

# Internal
100-120 V three phase
200-240 V single
200-240 V three phase
380-500 V single phase
380-500 V three phase
500-690 V single phase
500-690 V three phase
600 V single phase
600 V three phase
Not configured
Inactive
Pending
Running
Runs with warning
Error
Preset curve mode
Learnt curve mode
Not configured
Preset value mode
Inactive
Pending
Running
Error
Succeeded
Feedback
Error
Pressure

# Internal
CMI Bit 0
Bit 1

Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9

Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15

CMD Possible values in CiA402 profile, separate or not separate mode:

CMP0 Bit 0
CMP1 Bit 1
CMP2 Bit 2
CMP3 Bit 3
CMP4 Bit 4
CMP5 Bit 5
CMP6 Bit 6
CMP7 Bit 7
CMP8 Bit 8
CMP9 Bit 9
CMPA Bit 10
CMPB Bit 11 to 15
CMPC Possible values in the IO profile on state command [2 wire] (2C).
CMPD Bit 0
CMPE
CMPF

Bit 1 to 15
Possible values in the IO profile on edge command [3 wire] (3C).
Bit 0

Bit 1

Bit 2 to 15
ETA Possible values in CiA402 profile, separate or not separate mode:
EP0 Bit 0
EP1 Bit 1
EP2 Bit 2
EP3 Bit 3
EP4 Bit 4
EP5

# Internal
EP6
EP7
EP8 Bit 5
EP9 Bit 6
EPA Bit 7
EPB
EPC
EPD Bit 8
EPE Bit 9
EPF
ETAD
Bit 10

Bit 11

Bit 12
Bit 13
Bit 14

Bit 15

ETI Bit 0
IP0 Bit 1
IP1
IP2 Bit 2
IP3
IP4 Bit 3
IP5 Bit 4
IP6 Bit 5
IP7 Bit 6
IP8
IP9 Bit 7
IPA Bit 8
IPB Bit 9
IPC Bit 10
IPD Bit 11
IPE Bit 12
IPF Bit 13 to 14

Bit 15

CRC Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10

# Internal
 Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
CCC Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
IL1R Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
OL1R Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
CIC Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7

# Internal
 Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14

CRP0 Bit 0 to Bit 7: Active command channels

CRP1
CRP2
CRP3
CRP4
CRP5
CRP6
CRP7
CRP8
CRP9
CRPA
CRPB
CRPC
CRPD
CRPE
CRPF

Bit 8 to Bit 15: Active reference channels

FRY Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
EWE Bit 0
Bit 1
IL1I Bit 0

# Internal
 Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
PEV1 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
PEV2 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
PEV3 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13

# Internal
 Bit 14
Bit 15
PEV4 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
ST00 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
ST01 Bit 3
Bit 4
ST02 Bit 0
Bit 8
Bit 9
Bit 10
Bit 11
ST03 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 14
ST04 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10

# Internal
 Bit 11
ST05 Bit 0
Bit 1
Bit 2
Bit 6
Bit 7
Bit 11
ST06 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 9
Bit 10
Bit 11
ST07 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 8
Bit 9
ST08 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
ST09 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 11
ST11 Bit 0
Bit 1
Bit 2
Bit 3
Bit 9
Bit 10
Bit 11
Bit 12
ST12 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
ST13 Bit 0

# Internal
 Bit 1
Bit 2
Bit 3
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
ST14 Bit 0
Bit 1
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 15
ST15 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 9
Bit 10
Bit 11
ST16 Bit 1
Bit 2
ST17 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
ST18 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 13
Bit 14
Bit 15
ST19 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
ILCI Bit 0

# Internal
 Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
ILCR Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
OLCI Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
OLCR Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13

# Internal
 Bit 14
Bit 15
BPI0 Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
BFI0

CIC2

Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
ST20 Bit 1

# Internal
 Factory setting command (active at 1).
Save configuration to EEPROM non-volatile memory command (active at 1).
This Bit automatically changes to 0 after the request is taken into account. The command is only active if the drive is stopped, and not in "5-Operation enabled"
Note: If CMI is a periodic network variable, the PLC program must write it to 0 after the first request is taken into account. The life of the EEPROM memory is lim
Note: If the motor or configuration switching function is active, the configuration in the RAM is saved to the EEPROM in the configuration designated by [Config.
Reserved (= 0).
Reserved (= 0).
Reserved (= 0).
Reserved (= 0).
Reserved (= 0).
Reserved (= 0).
Reserved (= 0).
Definition of the frequency reference (LFr) and output frequency (rFr) unit:
= 0: 0.1 Hz
= 1: Standardized value 16 signed bits based on the maximum frequency. The value 32767 corresponds to [Max frequency] (tFr). The default value of [Max freq
approximately 0.0018 Hz.
This function has no effect on the speed reference (LFrd) or the output speed (rFrd).
Reserved (= 0).
Reserved (= 0).
Reserved (= 0).
Reserved (= 0).
Reserved (= 0).
Parameter consistency check
= 0: The check is activated. Each time a parameter is written, the drive checks the relationship between the written parameter and the configuration in the drive
parameter must be less than [Max frequency] (tFr).
= 1: The check is deactivated. The drive is locked in stop mode. In this drive state, the configuration can be written parameter by parameter and the drive does
The switch from 1 to 0 triggers a calculation of the consistency of the configuration. Some parameters can be modified automatically by the drive.
e values in CiA402 profile, separate or not separate mode:
Switch on/Contactor command.
Disable voltage/Authorization to supply AC power.
Quick stop.
Enable operation/Run command.
Reserved (set to 0).
Reserved (set to 0).
Reserved (set to 0).
Fault reset/error cleared on transition 0 to 1 .
Halt Stop according to the [Type of stop] (Stt) parameter without leaving the Operation enabled state.
Reserved (set to 0).
Reserved (set to 0).
Can be assigned to commands.
e values in the IO profile on state command [2 wire] (2C).
Forward (on state) command
= 0: No forward command
= 1: Forward command
The assignment of Bit 0 cannot be modified. It corresponds to the assignment of the terminals. It can be switched. Bit 0 (Cd00) is only active if the channel of th
Can be assigned to commands.
e values in the IO profile on edge command [3 wire] (3C).
Stop (run authorization).
= 0: Stop
= 1: Run is authorized on a forward or reverse command
Forward (on 0 to 1 rising edge) command.
The assignment of Bits 0 and 1 cannot be modified. It corresponds to the assignment of the terminals. It can be switched. Bits 0 (Cd00) and 1 (Cd01) are only a

can be assigned to commands.

e values in CiA402 profile, separate or not separate mode:
= 1: "Ready to switch on", awaiting power section line supply
= 1: "Switched on", ready
= 1: "Operation enabled", running
= 1: Fault detection
"Voltage enabled", power part connected to supply mains
= 0: Power part not connected to supply mains

# Internal
= 1: Power part connected to supply mains
When the drive is powered by the power section only, this bit is always at 1.
Bit 5: = 0: Quick stop
Bit 6: = 1: "Switched on disabled", power section line supply locked
Bit 7: Warning
= 0: No warning
= 1: Warning active
Bit 8: Reserved (= 0)
Bit 9: Remote: command or reference via fieldbus
= 0: Command or reference given via the graphic display terminal or remote display terminal
= 1: Command or reference via fieldbus
Bit 10: Target reference reached
= 0: The reference is not reached
= 1: The reference has been reached
When the drive is in speed mode, this is the reference frequency.
Bit 11: "Internal limit active", reference outside limits
= 0: The reference is within the limits
= 1: The reference is not within the limits
When the drive is in speed mode, the limits are defined by the [Low speed] (LSP) and [High speed] (HSP) parameters.
Bit 12: Reserved (= 0)
Bit 13: Reserved (= 0)
Bit 14: "Stop key", STOP via stop key
= 0: STOP key not active
= 1: Stop triggered by the STOP key on the graphic display terminal or the remote display terminal
Bit 15: "Direction", direction of rotation
= 0: Forward rotation at output
= 1: Reverse rotation at output
The combination of Bits 0, 1, 2, 4, 5 and 6 defines the state in the DSP 402 state chart (refer to fieldbus manuals).
= 1: Access to the EEPROM non-volatile memory in progress
= 0: No parameter consistency check
= 1: Parameter consistency check
= 0: The drive is not in operating state "Fault" or in operating state "Fault" and the error is active
= 1: The drive is in operating state "Fault" and the error is no longer active (not reset))
Bit 3: Reserved (= 0).
= 1: The drive is in speed mode
= 1: DC injection active
= 0: Drive in steady state
= 1: Drive in transient state
= 1: Motor thermal state threshold reached for the active motor
= 1: DC bus overvoltage
= 1: Acceleration active
= 1: Deceleration active
= 1: Current limit active
= 1: Fast stop active
bit 13 = 0 and bit 14 = 0: Drive controled by terminal
bit 13 = 1 and bit 14 = 0: Drive controled by remote keypad
bit 13 = 0 and bit 14 = 1: Drive controled by Modbus
bit 13 = 1 and bit 14 = 1: Drive controled by CANopen or the network card
= 0: Forward operation applied before the ramp
= 1: Reverse operation applied before the ramp
= 1 : Terminal board
= 1 : Local keypad
= 1 : Deported keypad
= 1 : Modbus
Reserved
Reserved
= 1 : CANopen
= 1 : Terminal up-Down speed
= 1 : Deported keypad up-down speed
= 1 : COM option board
Reserved

# Internal
= 1 : Embedded Ethernet
Reserved
Reserved
= 1 : Indus
= 1 : PowerSuite
= 1 : Terminal board
= 1 : Local keypad
= 1 : Deported keypad
= 1 : Modbus
Reserved
Keypad + terminal
= 1 : CANopen
= 1 : Terminal up-Down speed
= 1 : Deported keypad up-down speed
= 1 : COM option board
Reserved
= 1 : Embedded Ethernet
Reserved
Reserved
= 1 : Indus
= 1 : PowerSuite
"LI1" logic inputs real image
"LI2" logic inputs real image
"LI3" logic inputs real image
"LI4" logic inputs real image
"LI5" logic inputs real image
"LI6" logic inputs real image
"LI7" logic inputs real image
"LI8" logic inputs real image
Reserved
Reserved
"LI11" logic inputs real image
"LI12" logic inputs real image
"LI13" logic inputs real image
"LI14" logic inputs real image
"LI15" logic inputs real image
"LI16" logic inputs real image
"R1" relay real image
"R2" relay real image
"R3" relay real image
"R4" relay real image
"R5" relay real image
"R6" relay real image
Reserved
Reserved
"DO1" logic outputs real image
"DO2" logic outputs real image
Reserved
Reserved
"DO11" logic outputs real image
"DO12" logic outputs real image
Reserved
Reserved
= 1: Change of rating.
= 1: The fielbus module has been added.
= 1: The fielbus module has been removed.
= 1: Loaded config invalid.
= 1: The fielbus module has been changed.
Reserved (=0).
Reserved (=0).
Reserved (=0).

# Internal
 = 1: The IO module has been added.
= 1: The IO module has been removed.
= 1: The IO module has been changed.
= 1: The encoder module has been added.
= 1: The encoder module has been removed.
= 1: The encoder module has been changed.
= 1: The control board has been changed.
If one of these events occurs, the drive will trigger an error [Invalid configiguration] (CFI) and then automatically restore the factory settings.
Bit 7: Active command channels
=0 : The terminal board is the active channel.
=1 : The local keypad is the active channel.
=2 : The remote keypad is the active channel.
=3 : Modbus is the active channel.
=4 : Reserved
=5 : Reserved
=6 : CANopen is the active channel.
=7 : The terminals are the active channel in the +/- speed reference.
=8 : The remote keypad is the active channel (up-down speed)
=9 : The fieldbus module is the active channel.
=10 : Reserved
=11 : Reserved
=12 : Reserved
=13 : Reserved
=14 : Reserved
=15 : SoMove software is the active channel.
Bit 15: Active reference channels
=0 : The terminals are the active channel via an analog input.
=1 : The local keypad is the active channel.
=2 : The remote keypad is the active channel.
=3 : Modbus is the active channel.
=4 : Reserved
=5 : Reserved
=6 : CANopen is the active channel.
=7 : The terminals are the active channel in the +/- speed reference.
=8 : The remote keypad is the active channel (up-down speed)
=9 : The fieldbus module is the active channel.
=10 : Reserved
=11 : Reserved
=12 : Reserved
=13 : Reserved
=14 : Reserved
=15 : SoMove software is the active channel.
= 1 : All parameters
= 1 : Drive configuration
Reserved
= 1 : Motor parameters
= 1 : Communication menu
Reserved
Reserved
= 1 : Display menu
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
= 1 : Communication option parameters
= 1 : Enable Web
= 1 : Enable Email
"LI1" logic inputs physical image

# Internal
"LI2" logic inputs physical image
"LI3" logic inputs physical image
"LI4" logic inputs physical image
"LI5" logic inputs physical image
"LI6" logic inputs physical image
"LI7" logic inputs physical image
"LI8" logic inputs physical image
Reserved
Reserved
"LI11" logic inputs physical image
"LI12" logic inputs physical image
"LI13" logic inputs physical image
"LI14" logic inputs physical image
"LI15" logic inputs physical image
"LI16" logic inputs physical image
= 1 : first mapped Object
= 1 : second mapped Object
= 1 : third mapped Object
= 1 : fourth mapped Object
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
= 1 : first mapped Object
= 1 : second mapped Object
= 1 : third mapped Object
= 1 : fourth mapped Object
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
= 1 : first mapped Object
= 1 : second mapped Object
= 1 : third mapped Object
= 1 : fourth mapped Object
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved

# Internal
Reserved
Reserved
= 1 : first mapped Object
= 1 : second mapped Object
= 1 : third mapped Object
= 1 : fourth mapped Object
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
(JAMP) : An anti-jam request is pending
(JAMR) : An anti-jam sequence is running
(FILL) : Pipe fill sequence is running
(IPPC) : Inlet pressure compensation is running
(SLM) : Stop asked by a "sleeping" function
(LDA) : Low demand active (Wave 2)
(PPON) : Priming pump is running
(JPON) : Jockey pump is running
(SLPP) : Sleep is pending
(SLPB) : Sleep Boost phase is running
(SLP) : Application Sleeping
(ASLC) : Advanced Sleep Checking is active
(VCC) : Vortex Control's speed correction is active
(VCL) : Vortex Learning is in progress
(INFM) : INFM Warning
(SLF1) : Modbus local serial communication alarm
(CNF0) : Configuration 1 is used
(CFP1) : Parameter set 1 is used
(CFP2) : Parameter set 2 is used
(CFP3) : Parameter set 3 is used
(CFP4) : Parameter set 4 is used
(FLO) : Drive in forced local mode
(FR2) : Reference channel is channel 2
(FR1B) : Reference channel is channel 1, and FR1B is used
(FR1) : Reference channel is channel 1 (FR1 or FR1B is used)
(CD1) : Command channel is channel 1
(CD2) : Command channel is channel 2
(RFC) : Reference channel : 0-> channel1, 1-> channel 2
(RCB) : 0: FR1, FR1B ?
(CCS) : Command channel : 0-> channel 1, 1-> channel 2
(BMP) : Bump Less Channel
(AFFL) : Automatic Channel Fallback Active
(FLT) : Drive is in fault state
(AUTO) : Automatic restart attempts in progress
(RDY) : Drive is in ready state
(RUN) : A gating order is set (there is potentially current in the motor)
(DBL) : Powerstage is supply (DC bus charged)
(CTL) : Controlled stop on power loss in progress
(STO) : STO function activated
(FST) : A fast stop request is on going
(FRF) : Reaction on event / fallback speed
(RLS) : Reaction on event / maintain speed
(STT) : Reaction on event / Stop on STT without tripping in fault

# Internal
(IDLE) : Stop and Go idle state (FF343)
(LLC) : The drive asks to close the line contactor
(OCC) : The drive asks to close the output contactor (Controlled downstream contactor)
(SOC) : The drive has detected that the output contactor is open (Uncontrolled downstream contactor)
(CBEP) : The drive asks to close the circuit breaker
(CBDP) : The drive asks to open the circuit breaker
(DCRW) : DC Bus Ripple Warning
(ACC) : Drive in acceleration
(DEC) : Drive in deceleration
(SRA) : Frequency reference reached
(MFRD) : Motor running in Forward
(MRRS) : Motor running in Reverse
(ATS) : Torque on the motor is negative
(IDC) : DC injection is running (automatic or by order)
(TUN) : Autotune in progress
(MCP) : Motor current present
(RP2) : Ramp switching state : 0-> ramp 1, 1-> ramp 2
(AG1) : One of the alarm of alarm group 1 is active
(AG2) : One of the alarm of alarm group 2 is active
(AG3) : One of the alarm of alarm group 3 is active
(AG4) : One of the alarm of alarm group 4 is active
(AG5) : One of the alarm of alarm group 5 is active
(LCA1) : Life Cycle Alarm 1 alarm
(LCA2) : Life Cycle Alarm 2 alarm
(DRYA) : Dry Running Alarm
(PLFA) : Pump Low Flow Alarm
(HFPA) : High Flow Alarm
(IPPA) : Inlet Pressure Protection Alarm
(OPLA) : Outlet Pressure Low Alarm
(OPHA) : Outlet Pressure High Alarm
(PCPA) : Cyclic Start Protection Alarm
(JAMA) : Antijam alarm is raised
(LFA) : Low Flow Alarm
(LPA) : Low pressure alarm is raised
(FSA) : Flow limit function activated (FL_Mode_On)
(OPSA) : Outlet Pressure High Switch Alarm
(MPCA) : Multi-pumps Capacity Alarm
(MPLA) : Multi-pumps Lead Alarm
(LCHA) : Level Control High Level Alarm
(LCLA) : Level Control Low Level Alarm
(PFA) : alarm on PID Feedback
(PFAH) : PID feedback high threshold reached
(PFAL) : PID feedback low threshold reached
(PISH) : PI feedback monitoring alarm is raised
(LCWA) : Level Control Switch Failure Alarm
(VCA) : Vortex Control Alarm
(PEE) : alarm on PID error
(TP2A) : Temperature Protection AI2 Alarm
(TP3A) : Temperature Protection AI3 Alarm
(TP4A) : Temperature Protection AI4 Alarm
(TP5A) : Temperature Protection AI5 Alarm
(TS2A) : Temperature Sensor AI2 Alarm
(TS3A) : Temperature Sensor AI3 Alarm
(TS4A) : Temperature Sensor AI4 Alarm
(TS5A) : Temperature Sensor AI5 Alarm
(AP1) : 4-20 loss alarm on AI1
(AP2) : 4-20 loss alarm on AI2
(AP3) : 4-20 loss alarm on AI3
(AP4) : 4-20 loss alarm on AI4
(AP5) : 4-20 loss alarm on AI5
(THA) : drive overheating alarm is raised

# Internal
(TJA) : alarm on IGBT thermal state
(FCTA) : Fan Counter Speed alarm
(FFDA) : Fan feedback alarm is raised
(EFA) : external alarm is raised
(USA) : undervoltage alarm is raised
(UPA) : controlled stop on power loss threshold id reached
(OBR) : Impossible to follow the customer ramp during deceleration
(URA) : Intelligent Rectifier alarm is raised
(ERN) : Emergency
(FTA) : Motor frequency high threshold 1 reached
(FTAL) : Motor frequency low threshold 1 reached
(F2AL) : Motor frequency low threshold 2 reached
(FLA) : HighSpeedReached function result
(RTAH) : Reference frequency high threshold reached
(RTAL) : Reference frequency low threshold reached
(F2A) : Motor frequency high threshold 2 reached
(INWM) : Ethernet Internal Warning
(CTA) : Motor current high threshold reached
(CTAL) : Motor current low threshold reached
(TTHA) : Motor torque high threshold reached
(TTLA) : Motor torque low threshold reached
(ULA) : Underload is detected
(OLA) : Overload is detected
(CLI) : current or torque limitation is running
(POWD) : Electrical Power Drift alarm
(PTHA) : Power high threshold reached
(PTHL) : Power Low threshold reached
(TAD) : DriveThermalThresholdReached function result
(TSA) : MotorThermalThresholdReached function result (motor 1)
(CAS1) : Customer Alarm 1 active
(CAS2) : Customer Alarm 2 active
(CAS3) : Customer Alarm 3 active
(CAS4) : Customer Alarm 4 active
(CAS5) : Customer Alarm 5 active
(FCBA) : AFE : Fan running time
(FFBA) : AFE : Fan frequency
(CLIM) : AFE : Current or power limitation is running in motor mode
(CLIG) : AFE : Current or power limitation is running in generator mode
(THSA) : AFE : Sensor thermal state
(THJA) : AFE : IGBT thermal state
(FFCA) : MCE : Cabinet fan alarm state
(FCCA) : MCE : Cabinet fan alarm running time
(CHA) : MCE : Cabinet over-heating alarm
(CMIJ) : MCE : CMI jumper is closed
(COPA) : Liquid Cooled: Cooling Pump Alarm
(MOA) : Module Overheat Alarm
(LKON) : On Lock Alarm
(IWA) : IO function : Digital warning A
(IWB) : IO function : Digital warning B
(IWC) : IO function : Digital warning C
(IWD) : IO function : Digital warning D
(CWA) : IO function : Cabinet warning A
(CWB) : IO function : Cabinet warning B
(CWC) : IO function : Cabinet warning C
(TWA) : IO function : Thermal input warning A
(TWB) : IO function : Thermal input warning B
(TWC) : IO function : Thermal input warning C
(TWD) : IO function : Thermal input warning D
(CBW) : Circuit breaker : Error state (not in accordance to the start and stop pulse)
(P24C) : Cabinet IO supply (24V) missing
"DI50" logic inputs physical image

# Internal
"DI51" logic inputs physical image
"DI52" logic inputs physical image
"DI53" logic inputs physical image
"DI54" logic inputs physical image
"DI55" logic inputs physical image
"DI56" logic inputs physical image
"DI57" logic inputs physical image
"DI58" logic inputs physical image
"DI59" logic inputs physical image
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
"DI50" logic inputs real image
"DI51" logic inputs real image
"DI52" logic inputs real image
"DI53" logic inputs real image
"DI54" logic inputs real image
"DI55" logic inputs real image
"DI56" logic inputs real image
"DI57" logic inputs real image
"DI58" logic inputs real image
"DI59" logic inputs real image
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
"R60" relay physical image
"R61" relay physical image
"R62" relay physical image
"R63" relay physical image
"R64" relay physical image
"R65" relay physical image
"R66" relay physical image
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
"R60" relay real image
"R61" relay real image
"R62" relay real image
"R63" relay real image
"R64" relay real image
"R65" relay real image
"R66" relay real image
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved

# Internal
Reserved
Reserved
Fault in power brick 1
Fault in power brick 2
Fault in power brick 3
Fault in power brick 4
Fault in power brick 5
Fault in power brick 6
Fault in power brick 7
Fault in power brick 8
Fault in power brick 9
Fault in power brick 10
Fault in power brick 11
Fault in power brick 12
Bit0 : Fault in AFE brick 1
Bit1 : Fault in AFE brick 2
Bit2 : Fault in AFE brick 3
Bit3 : Fault in AFE brick 4
Bit4 : Fault in AFE brick 5
Bit5 : Fault in AFE brick 6
Bit6 : Fault in AFE brick 7
Bit7 : Fault in AFE brick 8
Bit8 : Fault in AFE brick 9
Bit9 : Fault in AFE brick 10
Bit10 : Fault in AFE brick 11
Bit11 : Fault in AFE brick 12
On power-up, read CIC :
If CIC and CIC2 = 0 -> Ok
If CIC or CIC2 not 0 -> malfunction
Write FCS = "INI" to return to factory setting
= 1 : SFTY option card added
= 1 : SFTY option card removed
= 1 : SFTY option card changed
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
(MPDA) : Master Slave : Device loss

# Internal