Technical Data Sheet

Formerly Known As: Shell Alvania Grease EP(LF) 0

• Reliable Protection
Shell Gadus S2 V220 0 •
•
Multi-purpose
Lithium

High Performance Multipurpose Extreme Pressure Grease

Shell Gadus S2 V220 greases are high quality multipurpose, extreme-pressure greases based on a blend of high
viscosity index mineral oils and a lithium hydroxystearate soap thickener and contain extreme-pressure and other
proven additives to enhance their performance in a wide range of applications.
Shell Gadus S2 V220 greases are designed for multipurpose grease lubrication of rolling element and plain
bearings as well as hinges and sliding surfaces such as those found in throughout most industrial and transport
sectors.

Performance, Features & Benefits Main Applications

· Outstanding load carrying capacity

Shell Gadus S2 V220 greases contain special extreme-

pressure additives which enable them to withstand heavy
and shock loads without failure of the lubricant film. Shell Gadus S2 V220 0 greases are specifically designed for:

· Improved mechanical stability · Steel mill lubrication where a softer grease is necessary for
specialised dispensing systems.
This is particularly important in vibrating environments
where poor mechanical stability can lead to grease · Heavy duty plain and rolling element bearings operating
under harsh conditions including shock loading in wet
softening with subsequent loss of lubrication performance
and leakage. environments.

· Good resistance to water wash-out Specifications, Approvals & Recommendations

Shell Gadus S2 V220 greases have been formulated to May be used in mobile equipment as an embedded grease
offer resistance to water wash-out. and for some central lubrication systems. Operating

· Oxidation stability temperatures for use in central lubrication systems are to be

defined dependent on its characteristics. For further
Specially selected base oil components have excellent
oxidation resistance. Their consistency will not alter in information please contact your local Shell Representative.

storage and they withstand high operating temperatures

without hardening or forming bearing deposits.

· Anti- corrosion protection

Shell Gadus S2 V220 greases have an affinity with metal

and have the ability to protect bearing surfaces against
corrosion, even when the grease is contaminated with
water.

Typical Physical Characteristics

Properties Method Shell Gadus S2 V220 0

NLGI Consistency 0

Soap Type Lithium

Base Oil Mineral

Page 1 of 2 Gadus S2 V220 0, v 1.8 05.07.2021.08.27

Properties Method Shell Gadus S2 V220 0
Kinematic Viscosity @40 C0
cSt IP 71 / ASTM D445 220

Kinematic Viscosity @100 C 0

cSt IP 71 / ASTM D445 19

Cone Penetration, Worked @250C 0.1mm IP 50 / ASTM D217 355-385

Dropping Point 0
C minimum IP 396 180

Low Temperature Flow Pressure @-200C mbar maximum DIN 51805 1 400

Four Ball Weld Load Kg minimum ASTM D2596 250

These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.

Health, Safety & Environment

· Health and Safety

Shell Gadus S2 V220 Grease is unlikely to present any significant health or safety hazard when properly used in the
recommended application and good standards of personal hygiene are maintained.

Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.

Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
https://www.epc.shell.com

· Hydraulic Brake Rubber Components

Care should be taken to ensure that the grease does NOT come into contact with hydraulic brake rubber components.

· Protect the Environment

Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Additional Information

· Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed.

· Operating Temperature
-300C to +1200C in closed bearings

· Advice

Advice on applications not covered here may be obtained from your Shell representative.

Page 2 of 2 Gadus S2 V220 0, v 1.8 05.07.2021.08.27