Scribd
Upload
441 views1 page

LLBF 122F

LLBF-122F is a linear low density polyethylene resin designed for blown film applications like produce bags and garment liners. It has excellent processability and strength properties for film thicknesses down to 0.5 mil. The resin provides good heat sealing performance, slip properties, and is FDA compliant for food contact. Typical properties include a melt index of 1.0 g/10min and a film haze of 7.5% with a tensile modulus of 31,000 psi.

Uploaded by

Yefrain J. Arzolay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
441 views1 page

LLBF 122F

LLBF-122F is a linear low density polyethylene resin designed for blown film applications like produce bags and garment liners. It has excellent processability and strength properties for film thicknesses down to 0.5 mil. The resin provides good heat sealing performance, slip properties, and is FDA compliant for food contact. Typical properties include a melt index of 1.0 g/10min and a film haze of 7.5% with a tensile modulus of 31,000 psi.

Uploaded by

Yefrain J. Arzolay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

LLBF-122F
Linear Low Density Polyethylene
LLBF-122F is a certified prime resin Butene-comonomer, specially designed for production of high performance
Blown films for general purpose packaging. LLBF-122F features excellent combination of easy processability with very
good film strength as well as wide heat sealing temperature range. LLBF-122F major applications include garment
bags, produce bags and liners. Maximum recommended film drawdown is 0.5 mil. LLBF-122F contains high slip
and high antiblock. LLBF-122F complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and with most international
regulations concerning the use of Polyethylene in conct with food articles.

Typical Properties

PROPERTIES* ASTM UNIT NOMINAL


TEST ENGLISH (METRIC) VALUES

RESIN

Melt Index D 1238E gr./10 min 1.0


Density D 1505 gr./cm3 0.922

FILM**

Haze D 1003 % 7.5


Gloss D 2457 @45° 65
Tensile Modulus1 D 882 psi x 1000 (MPa) 31/36² (215/250)
Yield D 882 psi x 1000 (MPa) 1.8/1.7² (12/11)
Break D 882 psi x 1000 (MPa) 6.5/4.3² (45/30)
Ult. Elongation D 882 % 650/990²
Elmendorf Tear D 1922 gr. 80/550²
Dart Impact, F50 D 1709A gr. 85

TYPICAL VALUE OF PROPERTIES NOT TO BE CONSTRUED AS SPECIFICATIONS.


* - Test specimens from compression molded plaque according to ASTM D 1928 Procedure C.
o o
**- 1.0 mils (25µ) film, melt temperature 395-430 F (200-220 C), blow-up-ratio 2.5 :1.
1 - 1% secant.
2 - MD/TD.
THIS PRODUCT DATA SHEET EFFECTIVE OCTOBER 2003 SUPERSEDES ALL DATA PREVIOUSLY PUBLISHED
The technical information, suggested uses and applications presented are made without charge and are believed to be reliable;
however, H. Muehlstein & Co., Inc. disclaims responsibility for results of use of this information. H. MUEHLSTEIN & CO. INC. MAKES
NO WARRANTIES, EITHER EXPRESS OR IMPLIED, CONCERNING OUR MATERIALS, INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. H. Muehlstein & Co. expressly disclaims any statements or
suggestions as being inducement. All users should rely upon their own test in determining suitability.

The Global Leader in Polymer Distribution

World Headquarters: 800 Connecticut Avenue, Norwalk, CT USA 06854-1631


Phone: (203) 855-6000 Fax: (203) 855-6222 E-mail: [email protected]

You might also like