Scribd
Upload
303 views2 pages

NORMARC 7720 ILS Far Field Monitor

The document summarizes the NORMARC 7720 ILS Far Field Monitor. It is an accurate and reliable piece of equipment for monitoring ILS signals. It contains two receivers for course line and course sector monitoring. The receiver unit processes ILS signals to provide deviation modulation, sensitivity modulation, and RF level readings. It can transmit data to an ILS equipment room through external modems and is typically located between the threshold and middle marker of a runway.

Uploaded by

Ismael Montilla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
303 views2 pages

NORMARC 7720 ILS Far Field Monitor

The document summarizes the NORMARC 7720 ILS Far Field Monitor. It is an accurate and reliable piece of equipment for monitoring ILS signals. It contains two receivers for course line and course sector monitoring. The receiver unit processes ILS signals to provide deviation modulation, sensitivity modulation, and RF level readings. It can transmit data to an ILS equipment room through external modems and is typically located between the threshold and middle marker of a runway.

Uploaded by

Ismael Montilla
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

AIR TRAFFIC MANAGEMENT

NORMARC 7720
Far Field Monitor

The NORMARC 7720 ILS Far Field Monitor (FFM) is an


accurate, reliable and user-friendly piece of equipment.
Easy installation and flexible connections Two receivers are included in the receiver The ILS signal information is transmitted
make it an ideal companion to ILS unit as standard; one is for Course Line either to a NORMARC 7000 ILS, or to
equipment. The receiver unit is (CL) monitoring and the other is (at the a connected PC with control software,
selfcontained for mounting in a shelter. customer’s option) used for Course Sector normally located inside the radio
It is typically located between threshold (CS) monitoring. equipment room, usually through external
and the Middle Marker site with monitor modems.
The receiver unit receives and processes
antenna(s).
the ILS signal to provide information on
DDM, SDM, and RF level for both channels.
NORMARC 7720 NORMARC 7720

SPECIFICATIONS
Far Field Monitor
Frequency range* 108.1-111.95 MHz

Channel spacing 50 kHz

RF level range 0 dBm to -80 dBm

DDM range 0-40%

DDM
Centring 0.07% DDM
Deviation 0.07% DDM
± 1.25% of DDM-reading
SDM range 0-95%

SDM error 0.5% SDM

Input connectors 2 BNC female

Output connectors Ethernet RJ45


RS-232
User Interface Graphical colour 5.7” LCD
Keys for selecting function and parameter
Power input 115VAC or 230VAC nominal voltage

Internal battery capacity 4 hours (12V)

Dimensions (WxHxD) 400 x 500 x 220 mm

Weight 19 kg

Antenna type 2-element Yagi

Antenna mast height Typically 6 m

Antenna cable 50Ω coaxial

Temperature range, operating -10° to +50°C

* The FFM includes GP receivers in addition to Localizer receivers,


hence, it can also be used for Glide Path monitoring

Not part of NORMARC 7720

CONFIGURATION 1
NORMARC 7720 Can be extended to include the data logger SW by adding a pair of
modems and a PC (option at additional cost)
Part of
NORMARC 7720
delivery

CL FFM
FFM RECEIVER MODEM MODEM NORMARC 7000 ILS ILS RCU STATUS
CS PANEL

PSU BATTERY

CONFIGURATION 2
(PC can handle 2 runway ends)

PC (OPTIONAL) FFM
WITH DATA STATUS
LOGGER SW PANEL

Typical ILS setup with connected NORMARC 7720 Far Field Monitor

Indra Navia AS Indra reserves the right to


Hagaløkkveien 26 modify these specifications
NO-1383 Asker, Norway without prior notice.
T: (+47) 23 18 02 00
F: (+47) 23 18 02 10
sales@indra.no
www.indranavia.com

You might also like