Scribd
Upload
86 views1 page

1-Port Indoor Omni Antenna Vertical Polarization

This document provides specifications for a 1-port indoor omni antenna that operates in the frequency ranges of 790-960 MHz, 1425-3800 MHz, and 5150-6000 MHz. The antenna has a vertical polarization and 360-degree coverage with a typical gain of 2 dBi. It can be operated simultaneously across all frequency ranges and does not require an additional ground plane. The antenna has an IP30 protection class, weighs approximately 1.1 pounds, and can be mounted to a ceiling using three included screws.

Uploaded by

MARIO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
86 views1 page

1-Port Indoor Omni Antenna Vertical Polarization

This document provides specifications for a 1-port indoor omni antenna that operates in the frequency ranges of 790-960 MHz, 1425-3800 MHz, and 5150-6000 MHz. The antenna has a vertical polarization and 360-degree coverage with a typical gain of 2 dBi. It can be operated simultaneously across all frequency ranges and does not require an additional ground plane. The antenna has an IP30 protection class, weighs approximately 1.1 pounds, and can be mounted to a ceiling using three included screws.

Uploaded by

MARIO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1-Port Indoor 790–960 1425 – 3800 5150 – 6000

Omni Antenna
Vertical Polarization V

■ The antenna can be operated in all frequency ranges


simultaneously.
■ The antenna needs no additional groundplane.

1-Port Indoor 790–960/1425–3800/5150–6000 360° 2dBi


Type No. 80010249 ∅ 258 mm | 10.2 inches
Frequency range MHz 790 – 960
1425 – 3800
5150 – 6000
Polarization Vertical
Gain, typ. dBi ≈2
Impedance Ω 50
VSWR 790 – 806 MHz: < 1.7
806 – 960 MHz: < 1.5
1425 – 1710 MHz: < 2.0
1710 – 2200 MHz: < 1.4
2200 – 3800 MHz: < 1.6
5150 – 5300 MHz: < 2.4
5300 – 6000 MHz: < 2.0
Intermodulation IM3 dBc 790 – 960 MHz: < –140 (2 x 40 dBm carrier)
1710 – 3800 MHz: < –140 (2 x 40 dBm carrier)
5150 – 6000 MHz: not relevant
Max. power W 50 (at 50 °C ambient temperature)
Input 1 x N female
Protection class IP 30
Weight g Approx. 500
lb Approx. 1.1
Packing size mm 277 x 277 x 169
inches 10.9 x 10.9 x 6.7
Diameter mm 258
inches 10.2
Height mm 94 (without connector)
inches 3.7 (without connector)
Fire load kWh 2.12

Material: Reflector: Aluminum.


Radome: High impact polystyrol, colour: White.
Additional painting is possible.

Mounting: Three holes in the base enable a mounting on


the ceiling. Two types of screws are supplied.
For the N connector a hole in the ceiling with a
diameter of 35 mm | 1.4 inches is required.

Available accessories: Broadband power splitters and tappers.

min. Ø 35 mm
min. Ø 1.4 inches

N connector, female
Subject to alteration.

3 holes dia. 0.2 inches


3 holes dia. 5 mm

dia. 6.3 inches


dia. 160 mm
936.2506/g

Clip the protective housing into position


after the antenna has been mounted with
the help of the three supplied screws.
Any previous data sheet issues have now become invalid.

All specifications are subject to change without notice.


The latest specifications are available at www.kathreinusa.com 80010249 Page 1 of 1

Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email: [email protected]

You might also like