Scribd
Upload
54 views1 page

B3636-1 PDS Vacuload-1 AU

The Vacuload 1 is a compact, powerful vacuum unit for blasting systems that is powered entirely by compressed air, removing the need for an additional motor. It has 1 dust collector cartridge and can convey up to 2 tonnes of garnet per hour. Measuring 72 inches tall, 72 inches long, and 35 inches wide, the Vacuload 1 is portable and versatile for recovering abrasive during blasting, vacuum blasting, or moving abrasive between job sites.

Uploaded by

wanfarouk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views1 page

B3636-1 PDS Vacuload-1 AU

The Vacuload 1 is a compact, powerful vacuum unit for blasting systems that is powered entirely by compressed air, removing the need for an additional motor. It has 1 dust collector cartridge and can convey up to 2 tonnes of garnet per hour. Measuring 72 inches tall, 72 inches long, and 35 inches wide, the Vacuload 1 is portable and versatile for recovering abrasive during blasting, vacuum blasting, or moving abrasive between job sites.

Uploaded by

wanfarouk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PRODUCT DATA SHEET

VACULOAD 1
VACUUM UNIT

PRODUCT DESCRIPTION
The Vacuload systems have been especially designed for PART NUMBERS
blasting systems and for handling abrasives. The Vacuload I
VAVaculoadI Vacuload Series I
is a small, compact and powerful vacuum system, making it
one of the most preferred vacuum systems on the market.
Vacuload I is powered entirely by compressed air, which
removes the need of additional expensive motor on a SPECIFICATIONS
blasting site. The same compressed air used to power the Compressed air required at 120 psi 350 cfm
blast machines can switched over to power the vacuum
recovery process Electrical Power Required Not required

Dust Collector Size 1 Cartridges

APPLICATIONS Filtration Area 226 sqft / 21 m2

This vacuum system is used to recover blasting abrasive, Automatic Reverse Pulse Cleaning Included
vacuum blasting, or to move bulk amounts of abrasive
Conveying Capacity (Garnet)* 2 tonne/hour
between locations within a job site. Typically, vacuum
systems tend to be used on bridge blasting, oil tanks, and Height 72 in / 1800 mm
jobs with confined spaces
Length 72 in / 1800 mm

Width 35 in / 890 mm
KEY FEATURES Size Vacuum Hose 3”

• Portable and versatile *Conveying capacity is subject to inlet compression air


• Separate interceptor system pressure, temp, abrasive density and size, length and size
of vacuum hose. These rates are indicative on using 50 ft (15
• Dust collection suitable for lead meters) of vacuum hose.
• Low cost barrier to purchase
• On-the-job clean up
• Vacuum load your blast pot

B3636-1

1800 190 190 www.BlastOne.com

You might also like