made in Italy
SCRUBBER-DRYER LINE
m650/750/830 HIGH PERFORMANCE RIDE-ON,
MANAGEABLE LIKE A WALK-BEHIND
PROFESSIONAL RIDE-ON SCRUBBER-DRYERS
M650/750/830
ENERGY OPTIMIZATION
Thanks to the optimization
PROFESSIONAL RIDE-ON SCRUBBER-DRYERS of energy consumption,
the batteries of the M650/
M750/M830 can provide
The M650, M750 and M830 MACH ride-on scrubber a non-stop uptime of
dryers have been designed following the M – mecha- 4 hours. The practical
nical philosophy. These machines keep electronics to onboard battery charger
a minimum and are designed to be extremely easy to guarantees an efficient
use and maintain. charge cycle.
They have a compact design and respective cleaning
paths of 65 cm, 76 cm and 83 cm. With a forward speed TRACTION MOTOR
of 6 km/h they guarantee an hourly productivity rate of
up to 5.000 m2/h.
The traction motor is
sealed and protected by
Agile, quick, and productive, the M650, M750 and M830 a robust steel bumper
are a modern alternative to bulky walk-behind scrub- which also incorporates an
ber-dryers or outdated, large ride-on units. anti-tilt device. The tyre of
Furthermore, these models offer the economic ad- the drive wheel is made of
non-marking and anti-skid
vantage of 4 hours of non-stop uptime, thanks to the
polyurethane.
optimization of energy consumption.
Contained dimensions enable the machines to pass
through standard doorways and be transported in VACUUM MOTOR
elevators.
The vacuum motor is
A complete set of standard accessories and a compe- powerful and extremely
silent, making these machi-
titive price point complete the many benefits of these nes particularly appreciated
wonderful MACH scrubber-dryers from the Mechani- in noise sensitive environ-
cal series, loved by operators for their ease of use and ments such as hospitals and
reliability. care homes. Its protected by
a double stainless-steel fil-
ter which is easy to remove
and clean.
DOSEMATIC® TECHNOLOGY
The DoseMatic® kit (optio-
nal) allows real time adjust-
ment of the percentage of
detergent being delivered
to the floor, for optimum
results, without waste.
FEATURES
• Maximum gradient 20%
• Non-marking, anti-skid polyurethane wheels
• Onboard battery charger
• Battery protection device
• Cleaning solution flow from 0 to 3,5 L/min
• Recovery tank maximum level detector
• Ergonomic opening to fill clean water tank
• Water pick up tube easy to inspect and maintain
• Rapid substitution of the tank gaskets
• Anti-tilt bar
• Adjustable seat fitted with weight sensor
• Reverse beeper
• Low noise level: 68 dB
• Low center of gravity for enhanced stability
• Competitive price point
• MACH drying system, with squeegee blades in
Linatex® / OLIRES®
• Self-levelling splash guard, can be put in lock
position for during pre-scrubbing
EASY AND INTUITIVE CONTROLS HIGH CAPACITY TANKS
High capacity tanks extend
The controls are extremely uptime, limiting the frequency
intuitive and easy to use, of time-consuming stops to
making it possible for any empty and refill. The stain-
operator to use the machine less-steel debris basket fitted
without the need for deman- in the recovery tank divides
ding and costly training. the wastewater collected,
separating out solid debris.
CHROME® TECHNOLOGY AUTOMATIC SQUEEGEE UNCOUPLING AND SWINGUARD®
The M650, M750 and M830 are Thanks to Swinguard® the
also available in a Chrome® squeegee glides along edges
version, with the frame, scrub and angles as if it were on a
rail. On accidental impact the
deck, squeegee, and metal
squeegee’s automatic uncou-
components made of stainless pling mechanism protects
steel, this version is perfect for both the machine and the
highly corrosive environments. environment being cleaned.
M - MECHANICAL
Created following the
“Electronic-Free” philo-
sophy, the functions of
an M line machine are
mechanically activated.
This ensures the unit is
simple to use and easy to
maintain, suitable even for
inexperienced operators.
VERSION
TRAC M – without added electronics
APPLICATIONS
Industrial sites, local councils, schools, offices, hospitals, religious buildings,
airports, ports, shopping centers, logistic centers and contract cleaners.
SURFACES
Ceramic, marble, cement, linoleum, porcelain tiles, non-slip floors and
rubber.
M650 M750 M830
CLEANING PATH 650 mm 760 mm 830 mm
FORWARD SPEED 6 km/h 6 km/h 6 km/h
HOURLY PERFORMANCE 3.900 m²/h 4.560 m²/h 4.980 m²/h
SOLUTION TANK CAPACITY 110 L 110 L 110 L
RECOVERY TANK CAPACITY 125 L 125 L 125 L
BRUSH PRESSURE 48 kg 52 kg 59 kg
SUPPLY VOLTAGE 24 V 24 V 24 V
WEIGHT WITH BATTERIES AND
351 kg 350 kg 365 kg
CHARGER
1.425 x 690 x 1.425 x 790 x 1.425 x 840 x
DIMENSIONS WITHOUT SQUEEGEE
1.243 mm 1.243 mm 1.243 mm
WIDTH WITH SQUEEGEE 920 mm 980 mm 1.040 mm
PLUS
/OLIRES
POWERFUL TRACTION MOTOR IN PROTECTED POSITION / POWERFUL AND
SILENT VACUUM MOTOR / STAINLESS STEEL ANTI DUST FILTER PROTECTS
VACUUM MOTOR / ONBOARD BATTERY CHARGER / STEEL SQUEEGEE
ADJUSTABLE AND PARABOLIC / SELF-LEVELLING SPLASH GUARD /
STAINLESS STEEL DEBRIS BASKET IN RECOVERY TANK / AUTOMATIC
SQUEEGEE UNCOUPLING ON IMPACT
MACH - FLOOR CLEANING MACHINES C/O
EUREKA S.p.A UNIPERSONALE
VIALE DELL’ ARTIGIANATO N. 30/32
35013 CITTADELLA (PD) ITALY
TEL +39 049 9481800 - FAX +39 049 9481899
[email protected] WWW.MACHCLEANINGMACHINES.COM
