ANJUMAN POLYTECHNIC
MICRO-PROJECT REPORT
On
SWITCH DEBOUNCE CIRCUIT
Submitted by
1. Danish Sheikh (59)
Enrollment no:2000760166
2.Aditya Binekar (19)
Enrollment no:2000760028
3.Umang Sayre (12)
Enrollment no:2000760021
Of COI3
under the supervision of
MR.JAHANGIR SIR
LECTURER
FOR THE SUBJECT
DIGITAL TECHNIQUES
In the academic year 2021-2022
Annexure-I
Micro-Project Proposal
Debounce switch
1.0 Aim/Benefits of the Micro-Project -> A Circuit To Implement
Debounce Switch
2.0 Course Outcomes Addressed
a) Co 1
b) Co 2
c) Co 3
3.0 Proposed Methodology
a) Firstly we search about the topic and collect info about it.
b) Finally we selected the topic.
c) Then we prepared a rough circuit diagram of the debounce switch.
d) After preparation of circuit diagram and other things we finally
bought the required materials.
e) Firstly we try to build the circuit on breadboard but we failed, but
after trying 5-6 times we had made it working.
f) After all we had handed our project to respective teacher.
P.T.O
4.0 Action plan
S. Details of Planned Start Planned Name of
No. activity date Finish date Team
Member
1 Topic selection 8-10-21 10-10-21 Danish
sheikh,
Aditya
binekar,
Umang sayre
2 Searching 11-10-21 20-10-21 Danish
details sheikh,
Aditya
binekar
3 Purchasing 21-10-21 30-10-21 Danish sheikh
things
4 Practical 1-11-21 30-11-21 Danish
implementation sheikh,
Umang sayre
6 Submitting 1-12-21 12-12-21 Danish
project report sheikh,
Aditya
binekar,
Umang sayre
5.0 Resources Required
S. Name of Specification Qty. Remarks
No. Resources/materia
l
1 Bread board -- 1
2 Led red, white 4
3 Resistor 33k,220k,10k 6
4 Jumper wires -- 20
5 Micro switch -- 1
6 Battery 9v 1
Name of Team with Roll No.
1.MOHAMMED DANISH SHIEKH
ROLL NO->59
2.UMANG SAYRE
ROLL NO->12
3.ADITYA BINEKAR
ROLL NO->19
*****************
Annexure-II
Micro-Project Report
Debounce Switch
1.0 Rationale -> Switch bouncing is not a major problem when
dealing with power circuits, but it causes issues on logic or digital
circuits. Hence, we use switch debouncing circuits to remove the
bouncing from the circuit. The basic idea is to use a capacitor to filter
out any quick changes in the switch signal.
2.0 Aims/Benefits of the Micro-Project:
AIM -> To build and implement debounce switch.
3.0 Course Outcomes Achieved
a) Co 1
b) Co 2
d) Co 3
4.0 Literature Review -> This can introduce errors in the system
you are using and can hinder a lot of processes. Thus, to avoid this
miss-interpretation of button press, the concept of switch debounce is
needed. This helps in registering the switch’s action correctly.
5.0 Actual Methodology Followed ->
a) Firstly we search about the topic and collect info about it.
b) Finally we selected the topic.
c) Then we prepared a rough circuit diagram of the debounce switch.
d) After preparation of circuit diagram and other things we finally
bought the required materials.
e) Firstly we try to build the circuit on breadboard but we failed, but
after trying 5-6 times we had made it working.
f) After all we had handed our project to respective teacher.
6.0 Actual Resources Used
S. Name of Specification Qty. Remarks
No. Resources/materia
l
1 Bread board -- 1
2 Led red, white 1
3 Resistor 33k,220k,10k 3
4 Jumper wires -- 14
5 Micro switch -- 1
6 Battery 9v 1
7.0 Outputs of the Micro-Projects -> After implementing/building
switch debounce circuit we get the desired output. When the switch is
pressed the capacitor charges and led glows even we stop pressing
the switch the led glow around 16-17 seconds.
Circuit Diagram ->
8.0 Skill Develop/Learning outcome of this Micro-Project -> While
making this circuit we have learned what is bread bord, how to use it.
How an ic works and how capacitor and resistor are used.
P.T.O
Herein, why is Debouncing important?
electrical contacts for switches have mass and momentum.
Usually a simplest single throw pushbutton is used for controls on
electronics for controls. Debouncing is a term used for techniques to
reduce a bouncing contact to one event. It can be software and hardware.
Likewise, what debounce means? Bouncing is the tendency of any two
metal contacts in an electronic device to generate multiple signals as the
contacts close or open; debouncing is any kind of hardware device or
software that ensures that only a single signal will be acted upon for a
single opening or closing of a contact. with when playing with switches
and digital circuits. If you want to input a manual switch signal into a
digital circuit you'll need to debounce the signal so a single press doesn't
appear like multiple presses.
9.0 Application of this Micro-Projects
-> Debouncing switch is used is logic circuits.
<> Name of Team with Roll No.
1.MOHAMMED DANISH SHIEKH
ROLL NO->59
2.UMANG SAYRE
ROLL NO->12
3.ADITYA BINEKAR
ROLL NO->19
*******************
