Altra Industrial Motion

Product
Overview
Drive
Solutions
with Bauer
Geared
Motors
 Product Overview - Drive Solutions with Bauer Geared Motors
Bauer Gear Motor I Product Overview - Drive Solutions with Bauer Geared Motors

Decentral
Energy Efficiency Water-/Wastewater
Standard F&B Solutions Ex Solutions Geared motor
Solutions Solutions
Solutions

Helical-Geared Motors Parallel Shaft Geared Motors Bevel-Geared Motors

BG Series BF Series BK Series

Compact and economical inline helical Shaft-mounted geared motors with inte- Power-dense, right-angle, bevel-geared motors
geared motors for long lifetime under grated torque arm are easily integrated ensure the highest efficiency especially when
arduous conditions. and economically applied. used with frequency inverters.

• Motor power from 0.03 kW to 75 kW • Motor power from 0.03 kW to 75 kW • Motor power from 0.03 kW to 75 kW
• 13 gearbox sizes for torques from • 10 gearbox sizes for torques from • 10 gearbox sizes for torques from
20 Nm to 18500 Nm 90 Nm to 18500 Nm 80 Nm to 18500 Nm
• New attachment possibilities with low • Gearbox housing with integral • Right angle gearbox with universal
design height torque arm attachment possibilities
• High efficiency through 2 stage base • High efficiency through 2 stage base • High efficiency through 2 stage base
design design design
• High enclosure IP65 as standard • High enclosure IP65 as standard • High enclosure IP65 as standard

Worm-Geared Motors Monorail Geared Motors HiflexDRIVE

BS Series BM Series Standard Design

Economical, right-angle, worm-geared A complete range of geared motors for light The HiflexDrive consists of three gear
motors install easily in the tightest and heavy load monorail applications. sizes BK04, BK08 and BK17.
applications.

• Motor power from 0.03 kW to 5.5 kW • Torques from 30 Nm up to 680 Nm • Gearbox BK04 [3]
• 8 gearbox sizes for torques from • Radial force up to 25.000 N Torque [1] 80 Nm
25 Nm to 1000 Nm Ratios [2] 7,25 - 63,33
Ratio and power is dependent on the motor size

• Flexible mounting on the running gear

• Gearbox BK08
• Hollow shaft version already available • Enclosure IP65 as standard Torque [1] 200 Nm
from 25 Nm Ratios [2] 4,44 - 102,5
• Improved efficiency – lower energy
Torque is dependent on ratio

• High loadable worm gearing for long consumption – ideal as travelling • Gearbox BK17
lifetime drives Torque [1] 330 Nm
• High enclosure IP65 as standard • Reverse motion of the gearbox is Ratios [2] 4,54 - 108,6
On request

possible • Motors
Power rating [2] 0,18 kW ... 6,3 kW
[1]
[2]
[3]

Efficiency Classes w/o, IE1 through IE5

Mains supply 110 V ... 690 V, 50/60 Hz
Enclosure IP65 (Standard)
2 www.bauergears.com P-7121-BGM-EN-A4 10/21
 www.bauergears.com
www.bauergears.com

Decentral
Energy Efficiency Water-/Wastewater
Standard F&B Solutions Ex Solutions Geared motor
Solutions Solutions
Solutions

HiflexDRIVE HiflexDRIVE
Aseptic Design Stainless Steel Design

Compact and space saving geared motors The stainless steel housing provide
fullfil the highest hygiene standards through these geared motors with the highest
their smooth and water repellent coating. mechanical resilience in washdown
applications.

• FDA conform Aseptic coating • Stainless steel housing

• Acid and alkali resistant coating • Highest mechanical resilience
(pH 2 through pH 12) • Rounded edges and corners
• Rounded edges and corners • Motor without cooling ribs and fan
• Motor without cooling ribs and fan • Flexible connection technology
• Flexible connection technology • IP67/IP69K
• High enclosure IP67/IP69K

AsepticDRIVE Surface Protection

C1 to C5-M,
lM2

Geared motors for the food & beverage Geared motors for the food & beverage Maximum corrosion protection for motors that are
industry as well as for all applications with industry in enclosure IP66 and IP67 exposed to extreme environmental conditions.
high cleaning intensity or ambient conditions with acid and alkali resistant coating as
such as dust, fluff etc. standard.

• Motor without fan and cooling fins • Motor without fan and cooling fins • Standard Indoor areas
• Motor power • Motor power • C1 Indoor areas, very low environmental
pollution
DA08 - DA11 0,25 kW - 2,2 kW DA05 - DA09 0,06 kW - 1,1 kW
• C2 Outdoor areas, low environmental pollution
SA08 - SA09 0,55 kW - 3 kW SA08 - SA09 0,55 kW - 3 kW
• C3 Indoor and outdoor areas, medium
• Available with helical, parallel shaft, • Motor winding in Iso Class F with environmental pollution (Production area
bevel and worm gears thermistors as standard with low humidity and air pollution)
• Motor winding in Iso Class F with • Motor connection through standard • C4 Indoor and outdoor areas, very high
environmental pollution (Production area
thermistors as standard terminal box or stainless steel with high humidity and air pollution)
• Enclosure IP67 and IP69K with acid cable gland • C5-I Outdoor areas, very high environmental
and alkali resistant coating as standard pollution, in aggressive atmospheres
• C5-M Coast and Offshore areas with high
• Motor connection through standard salt concentration
stainless steel plug connector • lM2 Brackish water

P-7121-BGM-EN-A4 10/21 Bauer Gear Motor | +49 711 3518-0 3

 Product Overview - Drive Solutions with Bauer Geared Motors
Bauer Gear Motor I Product Overview - Drive Solutions with Bauer Geared Motors

Decentral
Energy Efficiency Water-/Wastewater
Standard F&B Solutions Ex Solutions Geared motor
Solutions Solutions
Solutions

Energy Saving Geared Motors

IE1 IE2 IE3 IE4 IE1 IE2 IE3 IE4 IE5
PN [kW] PN [kW]
[ASM] [ASM] [ASM] [ASM] [PMSM] [PMSM] [PMSM] [PMSM] [PMSM]
0.03 D04LA4 0.12 S4E04SA4-1
0.04 D04LA4 0.157 SHE04SA4-1
D04LA4 S5E04SA4-1
0.06 0.2
D06LA4 S5E06MA4
D04LA4 0.25 S4E06MA4 S5E04SA4-1
0.09
D06LA4 0.315 S4E04SA4-1
0.11 D04LA4 0.37 SSE06MA4 S4E06LA4
DHE05LA4 DPE05LA4 0.4 S5E06MA4
0.12 DSE04LA4
DHE06LA4 DPE06LA4 0.55 SSE06LA4 S5E06MA4
DHE05LA4 0.75 SPE06MA4 S5E06LA4
0.18 DSE05LA4 DPE07LA4
DHE06LA4 0.78 S4E08MA4
0.25 DSE06LA4 DHE07LA4 DPE08MA4 1.1 SPE08LA4 S4E06LA4
0.37 DSE07LA4 DHE08MA4 DPE08LA4 1.55 SSE08LA4 S4E09SA4 S5E08MA4
0.55 DSE08MA4 DHE08LA4 DPE08XA4 DPE08XB4 S5E08LA4
2.2 SHE09SA4 S4E08MA4
DPE08XB4 S5E09XA4
0.75 DSE08LA4 DHE08XA4 DPE09XA4
DPE09LA4 3 S4E11SA6
DPE09XA4 SPE08LA4
1.1 DSE08XA4 DHE09LA4 DPE09XB4 3.1
DPE09XB4 SPE09XA4
1.5 DSE09LA4 DHE09XA4 DPE09XB4 DPE09XB4C 4 SPE11SA6 S4E09SA4
DPE09XB4C 4.2 S5E11MA6
2.2 DSE09XA4 DHE09XA4C DPE11MA4 DPE11LA4 S4E11SA6 S5E09XA4
5.5
DPE11LB4 S4E11MA6 S5E11LA6
DPE11LA4 6.3 S5E09XA4
3 DSE11SA4 DHE11MA4 DPE11LB4
DPE11LB4 7.5 SPE11LA6 S4E11SA6 S5E11MA6
DPE11LB4 S5E11MA6
4 DSE11MA4 DHE11LA4 DPE11LB4C 9.5
DPE13MA4 S5E11LA6
DPE11LB4C 11 S4E11MA6 S5E11LA6
5.5 DSE11LA4 DHE11LA4C DPE13LA4 15 S5E11LA6
DPE13XA4
7.5 DSE13MA4 DHE13LA4 DPE13XA4
9.5 DSE13LA4 DHE16MB4 DPE16LB4
11 DSE16MB4 DHE16LB4 DPE16LB4
15 DSE16LB4 DHE16XB4 DPE16XB4 Motor-Technologies
18.5 DSE16XB4 DHE18LB4 DPE18LB4
22 DSE18LB4 DHE18XB4 DPE18XB4 IE1• IE2 • IE3 • IE4 • IE5 •= in planning
30 DSE18XB4 DPE20XA4
kW
0.12

0.18

0.25

0.37

0.55

0.75

18.5

IE-
1.1

1.5

2.2

5.5

7.5

9.5

11

15

22

30

37

37 DPE22MA4
3

Class
IE1
Asynchronous • • • • • • • • • • • • • • • • • • • •
IE2
Asynchronous • • • • • • • • • • • • • • • • • • • •
IE3
Asynchronous • • • • • • • • • • • • • • • • • • • •
IE4
Asynchronous • • • • • • • • • • • • • •
IE3
PMSM • • • • •
IE4
PMSM • • • • • • • • • • • •
IE5
PMSM • • • • • • • • • • • • •

4 www.bauergears.com P-7121-BGM-EN-A4 10/21

 www.bauergears.com
www.bauergears.com

Decentral
Energy effiiency Water-/Wastewater
Standard F&B Solutions Ex Solutions Geared motor
Solutions Solutions
Solutions

Explosion-proof BAUER Geared Motors

Geared motors suitable for use in explosive areas:

GAS Zones 1, 2
DUST Zones 21, 22

DXD Zone 1 II 2 G Ex d(e) IIC T3…T4 Gb 0.12 … 75 kW

DXE Zone 1 II 2 G Ex e IIC T1…T4 Gb 0.12 … 11 kW
SXE Zone 1 II 2 G Ex e IIC T1…T4 Gb 0.55 … 15 kW
DXN Zone 2 II 3 G Ex nA IIC T3 Gc 0.03 … 30 kW
DXC Zone 21 II 2 D Ex tb IIIC T160°C IP66 Db 0.03 … 30 kW
DXC Zone 21 II 2 D Ex tb IIIC T120°C IP66 Db 0.03 … 22 kW
SXC Zone 21 II 2 D Ex tb IIIC T120°C…160°C IP66 Db
DXS Zone 22 II 3 D Ex tc IIIC T120°C…160°C IP65 Dc 0.03 … 30 kW
DXD Zone 1/21 II 2 G Ex d(e) IIC T3…T4 Gb
II 2 D Ex tb IIIC T120°C…160°C IP65 Db 0.12 … 75 kW
DXE Zone 1/21 II 2 G Ex e IIC T1…T4 Gb
II 2 D Ex tb IIIC T120°C…160°C IP66 Db 0.12 … 11 kW
SXE Zone 1/21 II 2 G Ex e IIC T1…T4 Gb
II 2 D Ex tb IIIC T120°C…160°C IP66 Db 0.55 … 15 kW
DXS Zone 2/22 II 3 G Ex nA IIC T1…T3 Gc
II 3 D Ex tc IIIC T120°C…160°C IP65 Dc 0.03 … 30 kW

Series S in IE4* for explosion hazardous areas

Design torque MN: 5 Nm – 48 Nm

Rated power PN: 0,75 kW – 15 kW

Protection type: S.XE.08MA4

Increased Safety Zone 1 S.XE.08LA4
II 2 G Ex eb IIC T1 - T3 Gb S.XE.09SA4
S.XE.09XA4
S.XE.11SA6
S.XE.11MA6
S.XE.11LA6
Dust explosion protection Zone 21 S.XC.08MA4
II 2 D Ex tb IIIC T 160°C ... 120° Db S.XC.08LA4
S.XC.09SA4
S.XC.09XA4
S.XC.11SA6
S.XC.11MA6
S.XC.11LA6
*Individual motor designs can show lower efficiency levels as IE4 at the nominal operating point.

P-7121-BGM-EN-A4 10/21 Bauer Gear Motor | +49 711 3518-0 5

 Product Overview - Drive Solutions with Bauer Geared Motors
Bauer Gear Motor I Product Overview - Drive Solutions with Bauer Geared Motors

Decentral
Energy Efficiency Water-/Wastewater
Standard F&B Solutions Ex Solutions Geared motor
Solutions Solutions
Solutions

IP68 gear motor for submersible operation

IP68 geared motors are most suitable where it is required to convey or transport foul, waste, river or rain water, and all types of sludge-containing
waters in communal or industrial areas. They are frequently used in agitators for mixing, homogenising, etc. or in extremely wet areas or complete-
ly submersed under water.

• Special design for continuous submersible operation • Fully cast cable to ensure maximum level of sealing
• Gear housing and motor are completely waterproof • Usable down to water depths of 5 m (greater depths also possible)
• Maximum leakage protection • Special coating allows extreme underwater conditions
• Special seals available for the output shaft (coating resistant against many aggressive chemicals)
• Electronic leakage detection is available as an option for early • Optionally also available with plug version of the cable
recognition of errors • Power classes: 0.37 – 11 kW (in Ex version on request)
• Energy-saving asynchronous and permanent magnet motors • Use in potentially explosive atmospheres
up to IE4 possible (e.g. Atex Zone 1)
• IP68 motors with brake available
• Gear motor can be operated at constant power in air or
in a medium

IE4
high
corrosion advanced coating systems
protection
customised sealing systems
stainless steel shafts
IP68
leakage sensors
6 www.bauergears.com P-7121-BGM-EN-A4 10/21
 www.bauergears.com
www.bauergears.com

Decentral
Energy Efficiency Water-/Wastewater
Standard F&B Solutions Ex Solutions Geared motor
Solutions Solutions
Solutions

Compact geared motor solution

• Adapted motor windings matched to VFD for optimised efficiency
EtaK2.0
• Optimised motor parameters over the entire speed and torque
range
• Motor and VFD combinations surpass IES 2 system efficiency class
according to EN 50598-2 and IEC 61800-9-2
• All necessary options integrated very compactly, including safety
functions

Motor combinations
Permanent magnet synchronous motors (PMSM)

PN [kW] Type nN [rpm] PVFD [kW]

0.55 S08MA4 3000 0,55

0.55 S08MA4 1500 0,55
0.75 S08MA4 3000 0,75
0.75 S08MA4 1500 0,75
1.1 S08MA4 3000 1,1
1.1 S08LA4 1500 1,1 Asynchronous motors (ASM)
1.5 S08MA4 3000 1,5
Base frequency Base frequency
1.5 S08LA4 1500 1,5
50 Hz 87 Hz
1.5 S09SA4 1500 1,5 Motor: Motor:
2.2 S08MA4 3000 2,2 350 V/50 Hz/Y 202 V/50 Hz/D

2.2 S08LA4 3000 2,2 PN 50Hz PFU IN PFU IN

Typ
2.2 S09SA4 1500 2,2 [kW] [kW] [A] [kW] [A]

2.2 S09XA4 1500 2,2 0.12 DHE06LA4 0.37 1.3 0.37 1.3
3 S08LA4 3000 3 0.18 DHE06LA4 0.37 1.3 0.37 1.3
3 S09XA4 1500 3 0.25 DHE07LA4 0.37 1.3 0.55 1.8
3 S11SA6 1500 3 0.37 DHE08MA4 0.37 1.3 0.75 2.4
4 S09SA4 3000 4 0.55 DHE08LA4 0.55 1.8 1.1 3.2
4 S11SA6 1500 4 0.75 DHE08XA4 0.75 2.4 1.5 3.9
4 S11MA6 1500 4 1.1 DHE09LA4 1.1 3.2 2.2 5.6
5.5 S09XA4 3000 5,5 1.5 DHE09XA4 1.5 3.9 3 7.3
5.5 S11MA6 1500 5,5 2.2 DHE09XB4 2.2 5.6 4 9.5
5.5 S11LA6 1500 5,5 3 DHE11MA4 3 7.3 5.5 13
7.5 S11SA6 3000 7,5 4 DHE11LA4 4 9.5 7.5 16.5
7.5 S11MA6 3000 7,5 5.5 DHE11LB4 5.5 13 - -
7.5 S11LA6 1500 7,5 7.5 DHE13LA4 7.5 16.5 - -

The motor combinations listed here are subject to change. Please contact our staff for more information.
P-7121-BGM-EN-A4 10/21 Bauer Gear Motor | +49 711 3518-0 7
Bauer Gear Motor Facilities

Europe North America Asia Pacific Customer Service

Germany Charlotte, NC China Belgium
Eberhard-Bauer-Str. 37 701 Carrier Drive 18 Huan Zhen Road Dabo 1702 Groot-Bijgaarden
73734 Esslingen - Germany Charlotte, NC 28216 - USA Industrial Zone - BoGoang Village +32 2 89372080
+49 711 3518 0 +1 800-387-0130 ShaJing Town - BaoAn District
Finland
Guangdong Province
Slovakia 01530 Vantaa
518104 Shenzhen City - China
Továrenská 49 +358 207 189700
+86 755 27246308
953 01 Zlaté Moravce - Slovakia
France
+421 37 6926100
1702 Groot-Bijgaarden
United Kingdom +32 2 89372080
Unit 1, Nat Lane Business Park
Italy
Winsford, Cheshire
35020 Padova (PD)
CW7 3BS - United Kingdom
+39 049 8792327
+44 1606 868600
Russia
Volokolamskoye sh., 142, bldg 6
Business Center „Irbis“
125464 Moscow - Russia
+7 495 6420468

The Brands of Altra Motion

Couplings Geared Cam Limit Switches Heavy Duty Clutches & Brakes Engine Braking Systems
Ameridrives Stromag Twiflex Jacobs Vehicle Systems
www.ameridrives.com www.stromag.com www.twiflex.com www.jacobsvehiclesystems.com
Bibby Turboflex Stromag
www.bibbyturboflex.com Engineered Bearing Assemblies www.stromag.com Precision Motors & Automation
Guardian Couplings Kilian Svendborg Brakes Kollmorgen
www.guardiancouplings.com www.kilianbearings.com www.svendborg-brakes.com www.kollmorgen.com
Huco Wichita Clutch
www.huco.com www.wichitaclutch.com
Electric Clutches & Brakes Miniature Motors
Lamiflex Couplings
www.lamiflexcouplings.com Matrix Portescap
www.matrix-international.com Gearing & Specialty Components www.portescap.com
Stromag Bauer Gear Motor
www.stromag.com Stromag
www.stromag.com www.bauergears.com
Overrunning Clutches
TB Wood’s Boston Gear
www.tbwoods.com Warner Electric Formsprag Clutch
www.warnerelectric.com www.bostongear.com
www.formsprag.com
Delevan
Linear Systems www.delevan.com Marland Clutch
Belted Drives www.marland.com
Thomson TB Wood’s Delroyd Worm Gear
www.thomsonlinear.com www.delroyd.com Stieber
www.tbwoods.com www.stieberclutch.com
Nuttall Gear
www.nuttallgear.com

Neither the accuracy nor completeness of the information contained in this publication is guaranteed by the company and may be subject to change in its sole discretion. The operating
and performance characteristics of these products may vary depending on the application, installation, operating conditions and environmental factors. The company’s terms and
conditions of sale can be viewed at http://www.altramotion.com/terms-and-conditions/sales-terms-and-conditions. These terms and conditions apply to any person who may buy,
acquire or use a product referred to herein, including any person who buys from a licensed distributor of these branded products.

©2021 by Bauer Gear Motor GmbH. All rights reserved. All trademarks in this publication are the sole and exclusive property of Bauer Gear Motor GmbH or one of its affiliated
companies.

Images: Fotolia, Adobe Stock, Altra and Bauer Archives

P-7121-BGM-EN-A4 10/21