Scribd
Upload
72 views

ER20 Data Sheet en

The ER20 single position rack is designed for fast and easy mounting of electricity meters for testing. It consists of robust aluminum profiles that can directly connect meters using test leads, or rapidly connect them using an optional quick connection device up to 100A. The rack allows automatic or manual testing of single and three phase meters up to 120A without additional equipment when used with a power calibrator.

Uploaded by

Wilder Uziel Montoya Noli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views

ER20 Data Sheet en

The ER20 single position rack is designed for fast and easy mounting of electricity meters for testing. It consists of robust aluminum profiles that can directly connect meters using test leads, or rapidly connect them using an optional quick connection device up to 100A. The rack allows automatic or manual testing of single and three phase meters up to 120A without additional equipment when used with a power calibrator.

Uploaded by

Wilder Uziel Montoya Noli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

.

Single Position Calmet


Calmet
____________
Calibration

Rack for Meter Hanging Calibration


ER20
Data Sheet

ER20 Single Position Rack for Meter Hanging


• Fast and easy mounting of different electricity meters
• Quick Connection Device up to 100A in option
• Robust aluminium profiles
• Light weight
• Elegancy design

The ER20 suspension rack provides a fast and easy mounting of the
electricity meter for the efficient testing of meters, sophisticated multi-
function meters or special tests. The ER20 rack is made of robust
aluminium profiles and may be used as:

Meter Suspension Rack with Direct Connection –


it enables electricity meters (and other devices as
protective relays or measurement transducers) to be
hanged, mounted and connected with using all types of
test leads,

Meter Suspension Rack with Quick Connection Device – it enables electricity


meters to be mounted and connected rapidly for the purpose of their adjustment, test
and verification. Thanks to the smart design of the EH20 quick connection device, it
may be used for the connection of practically all types of electricity meters with currents
up to 100A. The quick connection device is fixed to the suspension rack by using of two
knobs.
Spring contact pins of the EH20 are used to make
connection to the meter and may be easy moved
sideways and fixed in any desired position with
distance between two adjacent contact pins from
14mm. It is also easy to remove and switch the
pin positions for preparing the contact pin
configuration to many different meter connection
schemes, including single and three phase meters.

Flexible contact pins enable connecting:

safety voltage and current


cables up to 20A with
using adaptor M8-∅4,

current cables up to 120A

The ER20 rack together with C300 Power Calibrator allows the automatic
or manual testing of a single and three phase electricity meters and other
devices in 0.02 or 0.05 accuracy class up to 120A current range, without
the need of an additional instruments and options - see as example TB10
three phase meter test station.

www.calmet.com.pl/ Single Position Rack for Meter Hanging ER20 ER20 Data Sheet EN 2013-05 1/2
.
Assembly Manual and specification of the ER20 Rack Calmet
____________
Calibration

The ER20 is completely delivered as a ready for operation after connecting two parts using completed 5 mm
hex key according to following assembly manual:

Knob for hanger


height adjustment 5 mm hex key
of meter
BACK FRONT

Meter hanger

Knob with rubber ring


for fixing of meter
a b
a<b
Base of Rack (left side view)

Connect frame with base of rack using hex key


in bottom side
Frame of Rack (front view)

760mm

4kg weight

270mm

380mm
340mm

ER20 Rack's equipment


All completed ER20 Rack’s set consists of: Optionally for ER20 Rack are available:
• Frame of Rack, • EH20 Quick Connection Device
• Base of Rack,
• 5 mm hex key,
• Warranty card.

Calmet Ltd
Kukulcza 18, 65-472 Zielona Gora, Poland
Phone +48 68 324 04 56 Fax +48 68 324 04 57
E-mail: [email protected] Web access: http://www.calmet.com.pl

www.calmet.com.pl/ Single Position Rack for Meter Hanging ER20 ER20 Data Sheet EN 2013-05 2/2

You might also like