Scribd
Upload
38 views

EH20 Data Sheet en

The EH20 Quick Connection Device is used to rapidly connect electricity meters for testing and calibration. It features spring-loaded contact pins that can be configured for single or three-phase connections with currents up to 100A. The lightweight device mounts easily on test racks and allows quick setup of meters without additional equipment.

Uploaded by

Wilder Uziel Montoya Noli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views

EH20 Data Sheet en

The EH20 Quick Connection Device is used to rapidly connect electricity meters for testing and calibration. It features spring-loaded contact pins that can be configured for single or three-phase connections with currents up to 100A. The lightweight device mounts easily on test racks and allows quick setup of meters without additional equipment.

Uploaded by

Wilder Uziel Montoya Noli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

.

Quick Connection Device Calmet


Calmet
____________
Calibration

for Electricity Meter Test Calibration


EH20
Data Sheet

EH20 Quick Connection Device


• Fast and easy mounting and connecting of electricity meters
• Flexible single and three phase contact pin configurations
• Possibility to connecting of safety cables and current cables up to 120A
• Spring contact pins with current up to 100A
• Light weight
• Smart design

The EH20 Quick Connection Device is used together with electricity meter test
system, and is especially recommended, when saving time is important. This device
enables electricity meters to be mounted and connected rapidly for the purpose of
their adjustment, test and verification.

Thanks to the smart design of the EH20 quick connection


device, it may be used for the connection of practically all
types of electricity meters with currents up to 100A.
The quick connection device is delivered complete as a
ready for operation, and may be easily fixed to the ER20
aluminium suspension rack or multi-position testing stand
of TB40 Test Bench, in exactly the same way as a meter
is connected.
Spring contact pins of the EH20 are used to make connection to the meter and may
be easy moved sideways and fixed in any desired
position with distance between two adjacent contact
pins from 14mm. It is also easy to remove and switch
the pin positions for preparing the contact pin
configuration to many different meter connection
schemes including single and three phase meters.

Spring contact pins enables connecting:

safety voltage and current cables up to 20A with using M8-∅4


adaptor,

high current cables up to 120A,

safety voltage
cables in order to
furnish phase
voltages with
using safety
crocodile test clip.

The EH20 Quick Connection Device together with ER20 rack and
C300 Power Calibrator allows the automatic or manual testing of a
single phase and three phase electricity meters in 0.02 or 0.05
accuracy class up to 120A current range, without the need of an
additional instruments and options - see as example TB10 three
phase meter test station.

www.calmet.com.pl/ Quick Connection Device for Electricity Meter Test EH20 EH20 Data Sheet EN 2013-05 1/2
.
Specification of the EH20 Quick Connection Device Calmet
____________
Calibration

The EH20 is completely delivered as a ready to use and may be fixed to the ER20 rack as shown in the figures:
Cap

Knob for
hanger height Pusher
adjustment of 225mm
pusher
Possible adjustment
between contact pins
min. 14mm

Base plate Adaptor with spring


contact pins

Two knobs for fixing


of contact pins M8-∅4 adaptor
Two knobs for fixing of
adaptor – possible
adjustment between base
plate and contact pins is
102mm 18-40mm
Dimensions of
spring contact pins:
∅5

35mm
M8x8 thread for connecting safety
cables via M8-∅4 adaptor or high
current cables up to 120A

Continuous current: 100A


Maximum current: 120A 10min./1h
Pin resistance: 0.6mΩ@100A (resistance between M8 thread and terminal of meter including contact resistance)
Test voltage: 4000VAC / 50Hz / 1min.

EH20 Quick Connection Device's equipment


All completed EH20 QCD’s set consists of: Optionally for EH20 QCD are available:
• Pusher set • EA11 current cables up to 120A
• Base plate set, (2units) with set (6units) of
• Adaptor set, replaceable terminals,
• Spring contact pin (7units),
• M8-∅4 adaptor (7units),
• Safety crocodile test clip (3units),
• Warranty card.
• set of safety voltage and current
cables up to 20A (2units),

Calmet Ltd
Kukulcza 18, 65-472 Zielona Gora, Poland
Phone +48 68 324 04 56 Fax +48 68 324 04 57
E-mail: [email protected] Web access: http://www.calmet.com.pl

www.calmet.com.pl/ Quick Connection Device for Electricity Meter Test EH20 EH20 Data Sheet EN 2013-05 2/2

You might also like