RAISING YOUR STANDARDS

Kramer telehandlers up to 9 m stacking height

Telehandlers for professional agriculture
Available from your Kramer dealer On the safe side with Kramer
Rich in tradition, the Kramer brand has been established on the market for many years and in particular stands for one value:
Under the traditional brand name Kramer, Kramer-Werke GmbH produces compact Safety. The high quality of the innovative machines is only one aspect of this. As a company, Kramer is also a reliable
wheel loaders, telescopic wheel loaders and telehandlers with a high manoeuvrability, off- choice for customers and dealers because the experience and innovative power of the company ensures for investment
road capability and efficiency for agriculture. In the early years of more than the 90-year and future security. In short – you are always on the safe side with Kramer: “Kramer – on the safe side!”
company history, the company quickly made a name for itself as a manufacturer of
tractors. Today, Kramer-Werke GmbH is a medium-sized manufacturing company that
not only attaches great importance to its own research and development, but also offers
a wide assortment for material handling. All products made by Kramer are characterised
by advanced technology and the highest quality. Thanks to decades of experience in
the development and production of loading machines, these are ideally matched to
customer needs. In order to meet the requirements of professional agriculture in terms
of service and advice, Kramer has been offering the machines again directly via an
agricultural sales network since 2012. Due to the long history of the company and the
continuous company success, Kramer is optimally prepared for future challenges,
because the future needs origin. Table of contents

Kramer telehandlers Driver assistance systems Telehandlers at a glance

Sturdy Smart Driving Compact machine KT276
Versatile Smart Loading All-rounder KT306 - KT407

04 06 10
Efficient Smart Handling Performance range KT457 - KT559

Perfectly coordinated
Machine highlights Machine components Cabin concept
KT276 - KT559 and accessories Setup
Smart Handling High payloads
Engines Attachments Equipment
Safe, comfortable and efficient work at Thanks to the high payloads, our tele-

12 18 20
Drive system Quickhitch facilities Operator's controls
the same time is made possible by the handlers are designed to realize fast Hydraulics Loader units
intelligent driver assistance system Smart and high material handling.
Handling with three standard modes.

Drive train Rear and maintenance Technical Data

ecospeed & ecospeedPRO Optimal turning circle Drive system Rear attachment and Dimensions
Engines Maintenance and service
With ecospeed & ecospeedPRO trans- The use of the manoeuvrable telehand-
missions, the machine accelerates from
a standstill to a maximum of 40 km/h wi-
thout a single shift.
lers is also possible in tight farm yards.
22 24 30

An overview of all telehandlers:

KT276 KT306 KT356 KT307 KT357 KT407 KT457 KT507 KT557 KT429 KT559

02 03
Telehandler with wheel loader properties Flexibility in application
Ideally equipped for agriculture Raise your standards in all areas
From the start, the toughest agricultural applications were the measure of all things in the development of Kramer telehandlers. With the Kramer telehandlers, you can handle daily work without any problems. The machines not only support you with their
The machines were consistently designed for robustness and reliability based on the know-how from the wheel loader development. impressive performance, but also with standard driver assistance systems and the comfortable cabin designed for maximum
This can be seen, for example, in the torsionally stiff heavy-duty frame, which can safely accommodate the high payloads of the machine, ergonomics.
thanks to its closed design and large material thicknesses.

Starting from the KT457, the telescopic arm is additionally supported laterally in the frame, in order to transfer the forces extensively
into the frame during loading work. Just like the frame, all other components such as the shafts, the drive, the hydraulic system, the
telescopic arm and the quickhitch plate for hard agricultural work have been optimised.

Impressively versatile

The Kramer telehandlers are the perfect helpers, whether stacking,

loading material or feeding animals, every job is done quickly with
our powerful all-rounders and a large selection of attachments.
The telehandlers can also be supplemented with a wide range of
additional options. In this way, the telehandlers can be precisely
adapted to your requirements in order to make the machine even
more versatile.

Impressively efficient

Handling a lot of material in a short amount of time - Kramer

telehandlers were built for that. In addition to the comfortable
operation, the driver assistance system “Smart Handling” in
particular ensures an efficient and precise materials handling. The
system offers three modes so that the user can be supported in every
situation. In addition, the machine features a sensitive stepless drive
as standard, which can accelerate from a standstill to a maximum
speed without power interruption. In addition, the machine can
optionally be equipped with an automatic bucket reverse, including
vibration function, to further shorten the loading cycles.

Impressively sturdy

You can rely on the telehandlers in terms of their robustness and

durability. The load stabiliser for the telescopic arm provides a
decisive contribution here. The lifting, tilting and telescopic cylinders
are equipped with end damping to absorb pressure peaks in the
hydraulic system and/or a swaying of the machine - the driver and
machine are thus optimally protected from shocks.

04 05
Driver assistance system - Smart Driving Driver assistance system - Smart Loading
Engine speed reduction at maximum speed Automatic bucket reverse for faster load cycles

40
When the maximum speed is reached, the intelligent engine PM
The automatic bucket reverse “Smart Loading” with vibration function ensures faster load cycles, less material loss and the protection
R
speed reduction "Smart Driving" adjusts the engine speed to 50 against damage to the attachment and the machine.
1.5 2.000 R
PM
the performance requirements of the traction drive. This mini-
mizes noise, fuel consumption and the load on individual com- With the automatic bucket reverse, the attachment can automatically be moved to a previously programmed target position from any initial
2.
ponents. For the machines with ecospeed traction drive, the 3 situation. This noticeably reduces the cycle times when loading and stacking and relieves the driver significantly.

50
speed can be reduced to 2000 rpm. For the models with the

O
dP R

RP
RPM
new ecospeedPRO, it can even be reduced to up to 1550 rpm. The operator can use the vibration function to be able to quickly empty the bucket despite sticky goods or to be able to accurately portion

t at

M
ecospee

ecospee

Hydros
straw or silage. The attachment begins to vibrate around the starting position by pressing the key combination to easily remove wet or sticky
items such as manure, silage, or compost from the attachment.

up to
10%
less fuel
consump
tion

06 07
Driver assistance system - Smart Handling
Smart Handling - simply select
Everything under control, even in the limit range
A mode change takes place via the three-stage selector switch (right picture). To temporarily
bypass the overload system, the left pushbutton must be pressed continuously.
Maximum payload, fully extended loader unit system, engine speed at the detent – the Smart
Handling overload system always has everything under control in any situation. On the one
hand, the intelligent driver assistance system prevents loads from reaching the overload area
and therefore threatening to overturn the machine in the longitudinal direction. On the other
hand, it takes many routine tasks, such as extension and retraction of the telescopic arm, away
from the operator so that he can focus on the essential aspects of his work.

Bucket mode Stacking mode Manual mode

The three functional modes explained

Bucket mode Stacking mode Manual mode Joystick handling

When lowering the loader unit, the telescopic arm is When lifting and lowering the loader unit, the attachment is In manual mode, the machine does not perform any You have the whole machine under control with the
automatically retracted slowly. This keeps the load as close moved up and down in a vertical line, i.e. the telescopic arm automatic movements of the loader unit. The overload ergonomic joystick. With up to 17 functions, the most
to the vehicle as possible and it does not create critical automatically moves in and out and the load is moved up protection is of course still active and stops the loader important tasks can be done without letting go of the
situations, even with maximum payloads. The bucket mode or down in a straight line. Thus, the cargo always remains unit as soon as the overload limit is reached. At this point, joystick or changing your grip. For models from the KT276
is ideal for loading bulk materials. in the safe range and stacking work at high altitudes is only retracting, lifting the loader unit and dumping out the to the KT407, the joystick is attached to the cab console.
simplified. attachment are possible. For the models of performance class KT457 to KT559, the
joystick is affixed directly to the operator's seat.

08 09
Just make the right choice The performance class for particularly high payloads (KT457 - KT559)

Discover the Kramer product range of telehandlers The construction of this machine class has been reinforced for professional use in agriculture and supplemented with high-quality
basic equipment. For example, the load sensing hydraulics, the ecospeed or ecospeedPRO transmission and the 100% connectable
differential lock on the front axle are fitted as a standard. In addition, there is a comprehensive range of options that leaves nothing
to be desired.

The compact machine (KT276)

Thanks to its dimensions of less than 2 m

in height and 2 m in width, this machine
can also be used ideally in cramped farm
yards and stables. When developing the
machine, great importance was placed on
compactness, while retaining the typical up to 9 m
Kramer values of robustness, versatility height
stacking
and efficiency. Just like the larger models,
the KT276 has three modes of smart
handling. All components of the vehicle
have been designed for maximum pushing
power and lifting forces.

The all-rounder for the most versatile use (KT306 – KT407)

Thanks to their combination of high payload, unbeatable manoeuvrability, dynamic all-wheel drive and low operating weight, the all-
rounders are the all-purpose weapon for every operation. With a simple basic configuration and a multitude of options, this machine
class can be adapted to all needs and operational situations.

10 11
The compact machine among the telehandlers KT276
Refined, even under the hood Machine Highlights
Whether it's the compact all-rounder or the maximum performance for professional
Smart Handling
use - all eleven models are made for versatile tasks on the farm. The telehandlers Overload protection paired with higher productivity 2 x 2 metre class
are characterised by their high level of user-friendliness and technical sophistication.
Raising your standards.

Work hydraulics
with combined motion sequences
thanks to LUDV technology

Improved all-round visibility Solid quickhitch plate

two different vehicle heights from the wheel loader sector
available (1.98 m/2.10 m)

Increased cabin height for optimized

all-around visibility (+120 mm)

Compact dimensions 2.10 m

due to vehicle width and height of less than 2 m
1.98 m

Numerous
such as a three point linkage on the rear,
pressureless reverse travel with leak oil line, etc.

Powerful engine
from Kohler with 55.4 kW/75 hp Hydraulic three point linkage
with DOC + DPF (exhaust emission level V) on the rear and PTO 540 rpm

Work hydraulics with load-

independent flow distribution

Three steering modes

standard all-wheel, crab and front-wheel steering
Versatile tyre options
with maximum 20-inch tyres

12 13
The all-rounder and the performance range KT306 - KT559
Sturdy, versatile and efficient to the last detail Solid quickhitch plate
with four connection points (each 50 mm diameter)
for the perfect seat of the attachment

Pressure release of 3rd

control circuit Smart Handling
Overload protection paired with higher productivity

Powerful work hydraulics with

Load Sensing and up to 187 l/min for the fastest work processes

Telescopic arm
Storage compartment in the rear
with load stabiliser and final position dampening in all cylinders
weights (KT457 - KT559)

Modern operating concept

with 7" LCD display, all-in-one joystick and jog dial control
element for convenient machine control
Large, wide-opening engine hood
for easy maintenance

Adjustable steps

Torsion-resistant frame
in box profile design with lateral support for the telescopic Powerful Deutz engines
arm for the models KT457 - KT559 with a maximum performance of 115 kW (156 hp)

Simple exchange of the Standard rpm reduction

with ecospeed and ecospeedPRO to preserve
sliding elements the operator and the machine

Heavy duty axles

for maximum durability of the vehicle Variable drive system
for sensitive work and high pushing power

14 15
Kramer telehandler on a new level
New features overview Special new features

Recess in the cabin floor Stair-like cabin entr y

The Kramer telehandlers are also equipped with stage V engines due to the EU
exhaust emission regulation. The entire model range (KT276, KT306, KT356, KT307,
KT357, KT407, KT457, KT507, KT557, KT429, KT559) will receive some new features at the
same time, which mean increased comfort and an optimal driving experience for operators.
See for yourself!

Optimal all-round visibility

to the right side thanks to the optional increase in
cabin height by approx. 15 cm (option for KT306 to
KT407). Redesigned FOPS screen (external) Perfect all-round visibility Two cabin heights
for optimal visibility upwards. The longitudinal
struts incline in accordance with the operator’s
field of visibility outwards (KT306 to KT407 with
high cabin, KT457 to KT559 range).

Engine update to EU exhaust emission stage V

with the addition of the exhaust emission
treatment with a diesel particulate filter in the
Deutz Motor TCD 3.6 and Kohler KDI 2504. Noise reduction in the cabin
to 72 dB(A) for stress-free
work and increased levels of
concentration.
2,49 m* 2,31 m*
*with standard tyres

Manual crab steering Michelin BIBLOAD 540/70 R24

Easy cabin entry
for comfortable entry and exit due to
recess in the cabin floor and the step
arrangement designed like stairs for all
vehicles with a high cabin.

FOPS screen Noise-reduced cabin

Manual crab steering as fourth steering mode

for even more flexibility, for example
when compacting the silos. When doing this,
the rear axle is blocked and the front axle
72
Diverse tire options
remains freely mobile. dB (A)
for each and every customer's requirements.
Newly available: 500 mm wide tyres for the KT306
to KT407; three different Michelin BIBLOAD tyres
(460/500/540 mm width) for the KT457 to KT559.

16 17
A variety of tasks Quick-change system
Always the right attachments Ready to take on everything
No matter what challenges your workday has in store for you: With our attachments, you will Of course, the decades-long tradition of the Kramer quickhitch plate has also been continued with the telehandlers. In addition to
always have a handle on the situation. Thanks to the sturdy quick-change system, you can the reinforced design, the quick coupler system has a 50 mm diameter locating and lock pins, which can safely receive and affix all
attach the right attachment for every task to your Kramer telehandler. attachments with the least amount of wear.

You decide which attachment you need, entirely according to your needs. You can learn If desired, the attachment is locked mechanically or hydraulically. With hydraulic locking, the attachment can be easily changed from the cab by
more about our attachments here: www.kramer.de/attachments means of two-hand operation. The hydraulic connections are mounted directly on the quickhitch plate. As a result, they are easily accessible
and hydraulic hoses are prevented from being torn out. A metal plate protects the connections from damage. So that the attachment and
removal of hydraulic attachments is even faster, the machine can be equipped with a pressure relief of the third control circuit, as well as
Rapid with a multi-coupler. For attachments with multiple hydraulic functions, the telehandler can be equipped with additional hydraulic circuits,
attachme a non-return valve and a leakage pipe.
nt
change
over!

18 19
Comfortable working area Technical highlights
Everything outside in view Simple operation – Innovative cabin design
The cabin concept of the Kramer telehandlers was tailored to the operator’s needs. Functionality, ergonomics and ride comfort were always Display Jog Dial Hydraulic speed
the focus of the development.

The comfort begins when entering the cabin with the non-slip steps, which can be adjusted individually. From the inside, the cabin impresses
with its first-class space offered, outstanding all-round visibility and many other details, such as the internal mirror, tilt-and-adjustable
steering column, optional storage with cooling option or the radio with a Bluetooth hands-free kit. With the optional air conditioning system
and the seat with air suspension, even long working days can be made more comfortable.

The telehandler has a modern control The cabin is equipped with a so-called The display and the jog dial can be
panel with large 7-inch LCD display. jog dial. This makes it possible to easily used to adjust the speed of the work
The setup of the display is simple adjust all important machine settings, hydraulics for lifting and lowering the
and intuitive. All important vehicle such as the oil volume of all control lifting arm as well as tilting in and out
data and functions are shown in the circuits. The most important operating the attachments in three stages. This
main menu. The brightness can be data can be shown with the rotary and allows the operator to always choose
regulated and customised to your push wheel and adjusted entirely to the right balance between speed and
needs. the operator's needs. precision.

Joystick Switch concept Panoramic front window

You have the whole machine under

control with the ergonomic joystick.
With up to 16 functions on the joy-
stick, you have the most important
machine functions at your fingertips
in one hand.

You have the whole machine under All switches and buttons of the machine Everything always in view. All Kramer
control with the ergonomic joystick. are colour-coded so that the operator telehandlers have a continuous front
With up to 17 functions on the joy- can find the desired function faster. window without disturbing cross bra-
stick, you have the most important The buttons with a safety function are ces. The window has been pulled up
machine functions at your fingertips red, those for the hydraulics are green, and down as far as possible so that
in one hand. for the electrical system grey and for the operator can see the lock pins im-
the drive system blue. All controls are mediately when changing attachments
backlit, so you are always able to use and still has the attachment in the line-
the right switch even in the dark. of-sight at maximum stacking height.

20 21
Variably economical Powerful engines
The Kramer high-speed gearbox For any application with reduced consumption
All Kramer telehandlers are driven by an electronically-controlled hydrostatic
to For maximum drive performance with minimum fuel consumption, the right engines are selected for all machines. The KT276 is powered
gearbox. The best ride comfort and maximum pushing power are thus 40 km/h by the 55 kW Kohler KDI 2504 TCR. The models from the KT306 to KT507 are equipped with the Deutz TCD 3.6 with 100 kW. The two
combined in one transmission and available to you as the operator at all times. top models KT557 and KT559 are equipped with the even more powerful TCD 4.1 with 115 kW, also from Deutz.
without
Due to the large turning angle of the hydrostatic unit, the machines accelerate shifting
from a standstill to a maximum of 40 km/h without shifting. Thanks to this All Kramer machines comply with the current emission level V. Depending on the model and engine power, exhaust emission after-
technology, you can increase your productivity while at the same time treatment is carried out via different systems. The Kohler KDI 2504 TCR is equipped with a DOC and DPF technology. The Deutz TCD
reducing your fuel and labour costs. 3.6 and the Deutz TCD 4.1 are equipped as standard with a DOC, DPF and SCR system.

Depending on the model, the telehandlers can be equipped with different

transmission versions. The compact machine KT276 and the models of the all-
round class KT306 to KT407 are equipped with a sturdy hydrostat by default, Performance curve Kohler KDI 2504 TCR (KT276)
which can be used to reach a maximum speed of up to 30 km/h.
100 440

The telehandlers KT356, KT357 and KT407 can be optionally equipped with 87,5 400
the ecospeed wide-angle hydrostatic transmission, with which the vehicle

Performance (kW)
75 360

Torque (Nm)
reaches the final speed of 40 km/h.
62,5 320
In the machines of the performance range KT457 to KT559, either the
50 280
ecospeed transmission or the new ecospeedPRO transmission is installed.
This is characterised by further increased pushing power and the improved 37,5 240
functionality of the rpm limiter Smart Drivings. For customers with maximum
demands on pushing power, the models KT457, KT557 and KT559 are also 25 200
1000 1400 1800 2200
available with a 30 km/h gear ratio, which increases the pushing power again
Engine speed (rpm)
by up to 25%.

Performance curve Deutz TCD 3.6 (KT306 - KT507)

125 620

112,5 565

Performance (kW)
100 510

Torque (Nm)
87,5 455

Three freely selectable speed levels 75 400

The speed levels can be easily changed while driving. The change is performed conveniently with two buttons on the joystick and is 62,5 345
immediately shown in the 7" display with a corresponding symbol (see below). In addition to the three speed levels, a low-speed control
50 290
with electronically controlled hand throttle is available as an option.
1000 1400 1800 2200
Engine speed (rpm)

Performance curve Deutz TCD 4.1 (KT557 and KT559)

125 620

112,5 565

Performance (kW) 100 510

Torque (Nm)
87,5 455
Snail: 0 - 7 km/h Turtle: 0 - 15 km/h Hare: 0 - 40 km/h
(0 - 30/0 - 20 km/h) 75 400

62,5 345

50 290
1000 1400 1800 2200 Water-cooled 4-cylinder in-line engine with cooled external
Engine speed (rpm) Exhaust gas recirculation, turbocharging and intercooling.

22 23
Multifunctional rear attachment area Powerful telescopic arm
Maximum versatility for all tasks Made for the harshest applications
The Kramer telehandlers are not only characterised by the various quickhitch systems and numerous Right from the start, the development of the loader unit focused on maximum sturdiness. Buckets with large volumes, pushing work on
hydraulic options in the front, the telehandlers also meet all requirements in the rear. For trailer operation, the silo or the mucking out of deep litter in stables are no problem with these machines.
there are various trailer hitches to choose from, which are either solid-frame or height adjustable. A two-
circuit compressed air system and a dual-circuit hydraulic brake system are available as an additional The loader unit is made of a high-strength and torsion-resistant box profile. In order to transmit the acting forces safely, even when the telescopic arm
trailer brake. In the area of the hydraulic connections, a single-acting tipper connection and a double- is extended, the overlap area of the inner and outer arms is at least one metre. Both arm halves are connected with 13 polyamide sliding elements
acting hydraulic circuit are optionally available. for the best protection against wear.
Height External forces are transmitted via the large main pin and its solid mounting in the frame. For the models KT457 to KT559, the loader unit
adjustable
! is additionally supported laterally in the context of pushing work, so that the forces are introduced directly into the frame. The standard
end position damping in the lifting, extension and tipping cylinders allows for comfortable working. The optional load stabiliser ensures
maximum ride comfort and safe handling of heavy loads, even on uneven ground. All this ensures the maximum sturdiness and longevity of the
machine.

Lateral guidance of the loader unit Frame reinforcement at the main bearing

• lateral guidance of the telescopic arm during pushing work • large-scale introduction of torsional forces in the entire frame
(for models KT457 - KT559
• big main bolts and main bearing diameter for maximum
• easy replacement or adjustment of the sliding elements sturdiness

• closed frame structure

24 25
Maintenance and service
Easier and faster than ever
The telehandlers from Kramer also impress with service and maintenance. Already from the design and development, we make sure that
you have quick and easy access to all components. Because we know that every minute of application counts for you.

All points of daily maintenance and lubrication work can be conveniently reached from the ground. The centrally located lubrication lines
make the latter quick and easy. The engine hood can be opened wide so there is always enough space for maintenance, inspection or
repair. In order to access all components of the engine during maintenance, several maintenance openings are integrated into the engine
tray.

For easy and quick fault diagnosis in the hydraulic system and the drive, the test connections were merged together in the front of the
machine. The highly modern fault diagnosis tool also makes troubleshooting faults in the hydraulics and electronics a breeze. This saves
time, money, and nerves.

We are there for you when you need us. Our distributors are among the most efficient service providers in the agricultural sector worldwide.
Should a machine fail unexpectedly, we will always be at your side with our partners, even on long days during the harvest and on
weekends.

Thanks to our spare parts warehouse, we have tailor-made original spare parts available at all times so that your machine can resume work
immediately.

26 05
15
25
27
Kramer telehandlers at a glance

Robust • Torsionally rigid frame for maximum load capacity of the machine

• Lateral support of the loader unit during pushing work

• Large overlap between inner and outer arm and 13 sliding elements

• Standard end position damping in the lifting, telescopic and tipping cylinders

• Sturdy Kramer quickhitch plate:

Intelligent • Smart Handling: More productivity and large work-load reduction

• Smart Driving: Reduced speed (to a minimum of 1,550 rpm) at maximum

travel speed for noise and consumption reduction

• Smart Loading: Automatic bucket reverse with vibration function

for faster load cycles

• Load stabiliser with autofunction

Powerful • High-torque and economical engines from Kohler (KT276) and Deutz (KT306 - KT559)

• Efficient and powerful drive ecospeed and ecospeedPRO for maximum pushing power and,
at the same time, maximum sensitivity

• Variable drive system: Acceleration up to 40 km/h and always maximum pushing power

• Hydraulic performance of up to 187 l/min

• Adjustable hydraulic speed and oil volume adjustment for additional control circuits

Comfortable • Optimised all-round visibility and panoramic front window

• Large cabin and ergonomic operation

• Colour-coded operator’s controls grouped into groups

• 7-Inch colour display standard: All machine information and settings at a glance

• Pressure relief for the third control circuit at the gooseneck

Versatile • Large variety of options for meeting all requirements.

• A variety of attachments for all applications

• Pneumatic brake system and hydraulic trailer brake directly ex works

28 29
Technical data Technical data
Operating and performance data Unit KT276 KT306 KT356 Operating and performance data Unit KT307 KT357 KT407 KT457

Max. payload (LSP 500 mm) kg 2,700 3,000 3,500 Max. payload (LSP 500 mm) kg 3,000 3,500 4,000 4,500
Max. stacking height mm 5,730 6,150 6,150 Max. stacking height mm 7,000 7,000 7,000 7,017
Payload at max. stacking height kg 1,800 2,500 3,000 Payload at max. stacking height kg 2,000 2,200 2,400 3,300
Payload at max. coverage kg 1,000 1,200 1,350 Payload at max. coverage kg 1,000 1,200 1,500 1,500
Stacking height at max. payload mm 4,700 5,770 5,460 Stacking height at max. payload mm 5,500 5,220 4,500 5,100
Reach at max. payload mm 1,400 1,680 1,500 Reach at max. payload mm 1,780 1,680 1,720 1,600
Max. reach mm 3,156 3,280 3,280 Max. reach mm 3,760 3,760 3,760 3,790
Turning radius via tyres mm 3,670 3,840 3,840 Turning radius via tyres mm 3,840 3,840 3,840 3,755
Operating weight kg 4,200 - 5,000 5,720 - 6,820 6,020 - 7,050 Operating weight kg 5,920 - 7,250 6,170 - 7,500 6,810 - 7,850 8,100 - 9,100
Engine Unit Engine Unit

Make – Kohler Deutz Deutz Make – Deutz Deutz Deutz Deutz

Type/Model – KDI 2504 TCR TCD 3.6/L4 TCD 3.6/L4 Type/Model – TCD 3.6/L4 TCD 3.6/L4 TCD 3.6/L4 TCD 3.6/L4
Performance kW/PS 55.4/75 100/136 100/136 Performance kW/PS 100/136 100/136 100/136 100/136
Max. torque Nm 300 500 500 Max. torque Nm 500 500 500 500
Displacement cm³ 2,482 3,621 3,621 Displacement cm³ 3,621 3,621 3,621 3,621
Exhaust emission stage – Level V Level V Level V Exhaust emission stage – Level V Level V Level V Level V
Exhaust after-treatment – DOC + DPF DOC + DPF + SCR DOC + DPF + SCR Exhaust after-treatment – DOC + DPF + SCR DOC + DPF + SCR DOC + DPF + SCR DOC + DPF + SCR
Power transmission Unit Power transmission Unit

Drive system – Hydrostat Hydrostat Hydrostat Drive system – Hydrostat Hydrostat Hydrostat ecospeed
Max. speed km/h 30 (option) 30 40 (option) Max. speed km/h 30 40 (option) 40 (option) 40
Total oscillating angle Total oscillating angle
° 20 20 20 ° 20 20 20 20
on the rear axle on the rear axle
Differential lock – 45% self-locking differential on front axle 100% at the front axle
Differential lock – 100% in the front axle (optional)   45% self-locking differential on front axle
Foot-actuated hydraulic oil
Service brake – Foot-activated hydraulic disc brake
Service brake – Foot-activated hydraulic disc brake bath multi-disc brake
Parking brake – Hand-operated mechanical disc brake Electro-hydraulic multi-disc
Parking brake – Hand-operated mechanical disc brake
brake
Standard tyres (AS tread) – 12.5-18 405/70-24
Standard tyres (AS tread) – 405 / 70-24 460 / 70R24
Work hydraulics Unit
Work hydraulics Unit
Work pump – Gear pump with LUDV Load-sensing axial piston pump
Work pump – Gear pump with LUDV Load-sensing axial piston pump
Max. flow rate (pump) l/min 89 100 140 Max. flow rate (pump) l/min 100 140 140 140
Max. pressure bar 260 260 260 Max. pressure bar 260 260 260 260
Kinematics Unit Kinematics Unit

Bucket m³ 0.85 - 1.8 1.0 - 2.0 1.0 - 2.0 Bucket m³ 1.0 - 2.0 1.0 - 2.0 1.0 - 2.0 1.2 - 3.0
132 (series)
Total swing angle of tool carrier ° 155 155 Total swing angle of tool carrier ° 155 155 155 152
150 (option)
Lift cylinder raising/lowering s 6.6 / 4.3 7/5 5/4 Lift cylinder raising/lowering s 8/6 6/5 6/5 6.5/5
Extend/retract push-out cylinder s 5.5 / 3.5 8/6 5/4 Extend/retract push-out cylinder s 8/7 8/7 6/7 6/7
Tilt out/intipping cylinder s 2.9 / 2.8 4/4 3/3 Tilt out/intipping cylinder s 4/4 3/3 3.5/3 3.5/3
Capacities Unit Capacities Unit

Fuel tank l 95 100 100 Fuel tank l 100 100 100 180
DEF tank l - 9.5 9.5 DEF tank l 9.5 9.5 9.5 12
Hydraulic tank l 80 100 100 Hydraulic tank l 100 100 100 100
Hydraulic system (total) l 130 170 170 Hydraulic system (total) l 170 170 170 190
Noise emissions* Unit Noise emissions* Unit

Measured value dB(A) 103 105 105 Measured value dB(A) 105 105 105 104
Guaranteed value dB(A) 104 106 106 Guaranteed value dB(A) 106 106 106 106
Noise level at the operator’s ear dB(A) 72 72 72 Noise level at the operator’s ear dB(A) 72 72 72 72
Vibrations** Unit Vibrations** Unit

Vibration total value of the upper body Vibration total value of the upper body
– < 2.5 m/s² (< 8.2 feet/s²) – < 2.5 m/s² (< 8.2 feet/s²)
extremity extremity
Highest effective value of weighted < 0.5 m/s² (< 1.64 feet/s²)*** Highest effective value of weighted < 0.5 m/s² (< 1.64 feet/s²)***
– –
acceleration for the body < 1.28 m/s² (4.19 feet/s²)**** acceleration for the body < 1.28 m/s² (4.19 feet/s²)****

* Information: The measurement occurs as per the requirements of the standard EN 1459 and ** Measurement uncertainties as specified in ISO/TR 25398:2006. Please instruct or inform the * Information: The measurement occurs as per the requirements of the standard EN 1459 and **  easurement uncertainties as specified in ISO/TR 25398:2006. Please instruct or inform the
M
the directive 2000/14/EC. Measuring station: Paved surface. operator of possible dangers caused by vibrations. the directive 2000/14/EC. Measuring station: Paved surface. operator of possible dangers caused by vibrations.
*** on level and paved ground with appropriate driving style *** on level and paved ground with appropriate driving style
**** Use in extraction under harsh environmental conditions **** Use in extraction under harsh environmental conditions
30 31
Technical data Dimensions
Operating and performance data Unit KT507 KT557 KT429 KT559

Max. payload (LSP 500 mm) kg 4,800 5,500 4,200 5,500

Telehandler up to 9 m stacking height
Max. stacking height mm 7,017 7,017 8,750 8,750
Dimensions Unit KT276 KT306 KT356 KT307 KT357 KT407
Payload at max. stacking height kg 3,500 4,000 4,200 1,300/5,500 **
Payload at max. coverage kg 1,700 2,000 1,500 2,200 A Total length 1, 2, 3
mm 4,400 4,580 4,580 4,880 4,880 4,880
Stacking height at max. payload mm 5,600 5,500 8,750 6,400/8,750 **
B Total length with bucket 4
mm 5,000 5,300 5,300 5,600 5,600 5,600
Reach at max. payload mm 1,700 1,890 2,000 2,400
C Total width without bucket 5
mm 1,960 2,285 2,285 2,285 2,285 2,285
Max. reach mm 3,790 3,900 4,790 4,790
D Front/rear track 6
mm 1,650 1,880 1,880 1,880 1,880 1,880
Turning radius via tyres mm 4,240 4,240 4,415 4,415
1,985 (standard) 2,310 (standard) 2,310 (standard) 2,310 (standard) 2,310 (standard) 2,310 (standard)
Operating weight kg 8,600 - 9,600 9,500 - 10,500 9,000 - 10,500 10,500 - 11,500 E Total height 7
mm
2,100 (option) 2,490 (option) 2,490 (option) 2,490 (option) 2,490 (option) 2,490 (option)
Engine Unit
F Cabin width mm 825 990 990 990 990 990
Make – Deutz Deutz Deutz Deutz
G Wheelbase, middle mm 2,650 2,850 2,850 2,850 2,850 2,850
Type/Model – TCD 3.6/L4 TCD 4.1/L4 TTCD 3.6/L4 TCD 4.1/L4
Ground clearance 7 below shaft and
Performance kW/PS 100/136 115/156 100/136 115/156 H mm 300 415 415 415 415 415
transmission, fording depth
Max. torque Nm 500 609 500 609 Distance from centre of rear wheel to
I mm 730 545 545 740 740 740
Displacement cm³ 3,621 4,038 3,621 4,038 the tail 1, 2, 3

Exhaust emission stage – Level V Level V Level V Level V

J Rear actuation angle (departure angle) 8 ° 76 60 60 60 60 60

Exhaust after-treatment – DOC + DPF + SCR DOC + DPF + SCR DOC + DPF + SCR DOC + DPF + SCR K Tilt in angle 4
° 45/45 49 49 49 49 49

Power transmission Unit L Tilt out angle 4 ° 22/40 41 41 41 41 41

Drive system – ecospeed ecospeedPRO ecospeed ecospeedPRO Load-over height 7 M1 retracted 3,730 4,070 4,070 4,520 4,520 4,520
M mm
M2 extended 5,600 5,970 5,970 6,820 6,820 6,820
Max. speed km/h 40 (option) 40 40 (option) 40
Dumping height N1 retracted
7
3,450 3,580 3,580 4,030 4,030 4,030
Total oscillating angle N mm
° 20 20 20 20 N2 extended 5,280 5,480 5,480 6,330 6,330 6,330
on the rear axle
O Dumping width extended mm 680 270 270 110 110 110
Differential lock – 100% at the front axle
Tele extension length P1 retracted 4,420 4,670 4,670 5,255 5,255 5,255
P mm
Service brake – Foot-actuated hydraulic oil bath multi-disc brake P2 extended 6,260 6,570 6,570 7,820 7,820 7,820
Q Total height with rotating beacon mm 2,205 2,540 2,540 2,540 2,540 2,540
Parking brake – Electro-hydraulic multi-disc brake Total height of the telescopic arm
R mm 1,415 1,600 1,600 1,600 1,600 1,600
bearing in the frame 7
Standard tyres (AS tread) – 460/70R24
Distance from centre front wheel to
Work hydraulics Unit S mm 1,840 1,820 1,820 1,920 1,920 1,920
blade leading edge
Work pump – Load-sensing axial piston pump Distance from centre front wheel
Max. flow rate (pump) l/min 140 (standard) / 187 (option) 187 140 (standard) / 187 (option) 187 T bearing to the quick coupler system mm 1,030 1,100 1,100 1,200 1,200 1,200
seatings
Max. pressure bar 260 260 215 260
Bucket pivotal point 7 U1 retracted 4,210 4,585 4,585 5,035 5,035 5,035
U mm
Kinematics Unit U2 extended 6,070 6,485 6,485 7,335 7,335 7,335
Bucket m³ 1.2 - 3.0 1.2 - 4.0 1.2 - 3.0 1.2 - 4.0 V Transport position with attachment mm 175 250 250 250 250 250

Total swing angle of tool carrier ° 152 152 152 152 – Turning radius wheels, outside edge mm 3,670 3,840 3,840 3,840 3,840 3,840
– Turning radius bucket, outside edge mm 4,500 4,900 4,900 5,000 5,000 5,000
Lift cylinder raising/lowering s 6.5/5 6.5/6 9.4/7.5 9.4/7.5
– Entry height cabin floor
7
mm 360 720 720 720 720 720
Extend/retract push-out cylinder s 6/7 6/6 7.1/8.3 7.1/8.3
Tilt out/intipping cylinder s 3.5/3 3.5/3 4.0/3.4 4/3.4 1
with hitch coupling + 70 mm (KT276); + 320 mm (KT306, KT356, KT307, KT357, KT457, KT507, KT557); + 154 mm (KT559)
2
with height-adjustable ball hitch + 320 mm (KT306, KT356, KT307, KT357, KT457, KT507, KT557)
Capacities Unit 3
with fixed ball hitch + 200 mm (KT306, KT356, KT307, KT357, KT457, KT507, KT557)
Fuel tank l 180 180 180 180
4
with standard bucket
5
depending on the tyres, with mirrors folded in
DEF tank l 12 12 12 12 6
- 60 mm at 460 / 70-24 (KT306, KT356, KT307, KT357); + 20 mm at 500 / 70R24; + 40 mm at 440 / 70R28; + 60 mm at 17.5-25 (KT457, KT557, KT507, KT559)
7
Machine dimensions may vary depending on the tyres
Hydraulic tank l 100 100 100 100 8
with ball hitch 51 ° (KT276); 32 ° (KT306, KT356, KT307, KT357)
Hydraulic system (total) l 190 190 190 190
Noise emissions* Unit

Measured value dB(A) 104 105 104 105

Guaranteed value dB(A) 106 106 106 106
Noise level at the operator’s ear dB(A) 72 72 72 72
Vibrations*** Unit

Vibration total value of the upper body

– < 2.5 m/s² (< 8.2 feet/s²)
extremity
Highest effective value of weighted < 0.5 m/s² (< 1.64 feet/s²)****
–
acceleration for the body < 1.28 m/s² (4.19 feet/s²)*****

* Information: The measurement occurs as per the requirements of the standard EN 1459 and *** Measurement uncertainties as specified in ISO/TR 25398:2006. Please instruct or inform the
the directive 2000/14/EC. Measuring station: Paved surface. operator of possible dangers caused by vibrations.
**** on level and paved ground with appropriate driving style
** with hydraulic level compensation ***** Use in extraction under harsh environmental conditions
32 33
Dimensions Dimensions

Telehandler up to 9 m stacking height

Dimensions Unit KT457 KT507 KT557 KT429 KT559

A Total length 1, 2, 3
mm 4,985 4,985 4,985 5,600 - 5,890 5,600 - 5,890

B Total length with bucket 4

mm Up to 6,160 Up to 6,160 Up to 6,160 Up to 6,690 Up to 6,690
C Total width without bucket 5
mm 2,500 2,500 2,500 2,500 2,500

D Front/rear track 6
mm 1,995 - 2,065 1,995 - 2,065 1,995 - 2,065 1,995 - 2,065 1,995 - 2,065

E Total height 7
mm 2,570 2,570 2,570 2,570 2,570
F Cabin width mm 990 990 990 990 990
G Wheelbase, middle mm 2,950 2,950 2,950 3,150 3,150
Ground clearance 7 below shaft and
H mm 418 418 418 412 412
transmission, fording depth
Distance from centre of rear wheel to
I mm 950 - 1,100 950 - 1,100 950 - 1,100 1,140 1,140
the tail 1, 2, 3
J Rear actuation angle (departure angle) 8 ° 35 35 35 32 32
K Tilt in angle 4
° 45 45 45 45 45
L Tilt out angle 4 ° 41 41 41 41 41
Load-over height 7 M1 retracted 4,518 4,518 4,518 5,545 5,545
M mm
M2 extended 6,835 6,835 6,835 8,498 8,498
Dumping height N1 retracted
7
3,865 3,865 3,865 5,015 5,015
N mm
N2 extended 6,183 6,183 6,183 7,997 7,997
O Dumping width extended mm 495 495 495 63 63
Tele extension length P1 retracted 5,287 5,287 5,287 6,277 6,277
P mm
P2 extended 7,604 7,604 7,604 9,243 9,243
Q Total height with rotating beacon mm 2,740 2,740 2,740 2,740 2,740
Total height of the telescopic arm
R mm 1,761 1,761 1,761 1,935 1,935
bearing in the frame 7
Distance from centre front wheel to
S mm max. 2,260 max. 2,260 max. 2,260 max. 2,400 max. 2,400
blade leading edge
Distance from centre front wheel
T bearing to the quick coupler system mm 753 753 753 1,310 1,310
seatings
Bucket pivotal point 7 U1 retracted 5,092 5,092 5,092 6,116 6,116
U mm
U2 extended 7,409 7,409 7,409 9,083 9,083
V Transport position with attachment mm 250 250 250 250 250
– Turning radius wheels, outside edge mm 4,240 4,240 4,240 4,415 4,415
– Turning radius bucket, outside edge mm 5,265 5,265 5,265 5,650 5,650
– Entry height cabin floor
7
mm 975 975 975 975 975

1
with hitch coupling + 70 mm (KT276); + 320 mm (KT306, KT356, KT307, KT357, KT457, KT507, KT557); + 154 mm (KT559)
2
with height-adjustable ball hitch + 320 mm (KT306, KT356, KT307, KT357, KT457, KT507, KT557)
3
with fixed ball hitch + 200 mm (KT306, KT356, KT307, KT357, KT457, KT507, KT557)
4
with standard bucket
5
depending on the tyres, with mirrors folded in
6
- 60 mm at 460 / 70-24 (KT306, KT356, KT307, KT357); + 20 mm at 500 / 70R24; + 40 mm at 440 / 70R28; + 60 mm at 17.5-25 (KT457, KT557, KT507, KT559)
7
Machine dimensions may vary depending on the tyres
8
with ball hitch 51 ° (KT276); 32 ° (KT306, KT356, KT307, KT357)

34 35
Load-bearing capacity diagrams Load-bearing capacity diagrams

KT276 Load-bearing capacity diagram KT306 Load-bearing capacity diagram KT357 Load-bearing capacity diagram KT407 Load-bearing capacity diagram
(with LSP 500 mm) (with LSP 500 mm) (with LSP 500 mm) (with LSP 500 mm)

65°
60° 2,0
7
1,5
2400 kg
50° 1,0
6
0,5
40°
5
0,5

3500 kg
30°
4

4000 kg
3000 kg
3
20°

2500 kg
2

2000 kg
10°
1

1500 kg
0,545
0°
0
-2,6°

0,609
(m) 4 3 2 1 0

KT356 Load-bearing capacity diagram KT307 Load-bearing capacity diagram KT457 Load-bearing capacity diagram KT507 Load-bearing capacity diagram
(with LSP 500 mm) (with LSP 500 mm) (with LSP 500 mm) (with LSP 500 mm)

36 37
Load-bearing capacity diagrams Load-bearing capacity diagrams

KT557 Load-bearing capacity diagram (with LSP 600 mm) KT559 Load-bearing capacity diagram (with LSP 600 mm)
with hydraulic level compensation and with oscillating axle lock

KT429 Load-bearing capacity diagram KT429 Load-bearing capacity diagram KT559 Load-bearing capacity diagram KT559 Load-bearing capacity diagram
(with LSP 500 mm) (with LSP 500 mm) (with LSP 600 mm) (with LSP 600 mm)
without oscillating axle lock with oscillating axle lock without hydraulic level compensation with oscillating axle lock
and without oscillating axle lock

68° 68°
3,0 3,0
9 60° 2,5 9
60° 2,5
2,0 2,0
8 50° 1,5 8 50°
1200 kg 1,5
1,0 1,0
7 0,5 7 0,5
40° 40°
6 6
0,5
30° 30°
5 5 0,5
4200 kg

4200 kg

4 4
20°
3500 kg

20°
3500 kg

3 3
2500 kg

2500 kg

2 10°
1500 kg

2 10°
1500 kg

1 1
0,567
0,567
0° 0°
0 0
-3,3° -3,3°
0,625

0,625

(m) 5 4 3 2 1 0 (m) 5 4 3 2 1 0

38 39
www.kramer.de

Wheel loader Telescopic wheel loader Telehandler

Tipping load: 1,140 - 7,000 kg Tipping load: 2,500 - 5,500 kg Payload: 2,700 - 5,500 kg

Service that can be seen

Focus on your daily activities – with our comprehensive services, we take care of
the rest. We are there when you need us: capable, fast, and directly on site if necessary.

Repair & maintenance Academy Telematics Insurance Spare parts Finance

*KA.EMEA.10268.V04.EN-GB*
KA.EMEA.10268.V04.EN-GB

03/2021 EN-GB