Visualization Solutions

Graphic Terminals
Tethered Operator Terminals
Industrial Computers and Monitors
FactoryTalk Software

Selection Guide
Visualization Solutions Selection Guide

What’s Inside
Topic Page
Add Visualization to Your Control System 3
Graphic Terminals 7
Industrial Computers, Monitors, and Thin Clients 13
Related Software 17
Additional Resources 21

What’s New
To help you optimize productivity, Rockwell Automation is expanding its product line by offering the following new products:
• Stainless steel versions of the 9-in touch-only and 12-inch touch-only units in the PanelView 5510 family of terminals. For more
detailed information about these terminals, including complete technical specifications, certifications, and environmental
specifications, see PanelView 5510 Terminals Specifications Technical Data, publication 2715P-TD001.
• The ASEM™ 6300 portfolio of open architecture industrial PCs, thin clients, and monitors, which will be available in the near future.
With the huge number of available ASEM 6300 hardware configurations, you have the flexibility to adapt to rapidly changing
performance requirements. For more detailed information about these terminals, including complete technical specifications,
certifications, and environmental specifications, see the ASEM 6300 Industrial PCs, Thin Clients, and Monitors Specifications
Technical Data, publication 6300-TD001, when it becomes available.

2 Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022

 Add Visualization to Your Control System

Visualization and human-machine interface (HMI) solutions help you address your productivity, innovation, and globalization needs. Our
portfolio provides a consistent look and feel for electronic operator interface terminals, distributed client/server HMI, and information
software. Programming tools and advanced software applications include remote access and data analysis to accelerate development and
improve efficiency.

Visualization products from Rockwell Automation comprise a suite of scalable HMI software and operator interface hardware that provide
plant floor machine operators, supervisors, engineers, and business managers a window to critical data and production and process
information. All of this information can be obtained from the plant floor and displayed on a local HMI or remotely on a web browser.
• Graphic terminals offer rugged electronic interface solutions in various sizes, operator input methods, and configurations. These
robust devices are fully packaged (hardware, software, and communications) and tested for human-machine interface operation.
• Tethered operator terminals are mobile devices that help increase operator productivity and provide a safe production environment.
The mobile operator interface runs the Windows® Embedded Standard 7 operating system, but allows reuse of FactoryTalk® View ME
and FactoryTalk® View Studio applications.
• Industrial computers and monitors provide a rugged industrial computing platform for critical infrastructure and analytical solutions.

Possible architecture diagram

This selection guide is meant to help you make initial decisions for the visualization products that are best suited for your system
requirements. For detailed technical specifications, certifications, and environmental specifications, see the documentation links in each
product section.

For assistance and validation in final product selections, consider using the Configuration and Selection tools available at http://
www.rockwellautomation.com/en/e-tools/index.html.

Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022 3

Add Visualization to Your Control System

Visualization Solutions
Our smart HMI products consist of graphic terminals, industrial PCs, monitors, and software.

Graphic Terminals
Our Graphic Terminals offer rugged electronic interface solutions in various sizes, operator input methods, memory options, and
configurations. These robust devices are fully packaged (hardware, software, and communications) and tested for HMI operation.
Application Requirements Select
Can be used with multiple controllers
Enhanced integration with Studio 5000® and high-speed HMI buttons for jogging applications PanelView™ 5000 terminal
Preconfigured navigation menus see page 8
Scalable graphics
User-friendly workflows
Can be used with multiple controllers
Integration with Studio 5000 PanelView 7 Plus terminal
Integration with FactoryTalk View see page 9
Connectivity to third-party devices and controllers
Self-enclosed panel, IP66 protection ArmorView Plus 7 terminal
Hardwired E-stop see page 9
Standalone machine PanelView 800 terminal
Micro and small controllers see page page 11

Tethered Operator Terminals

Our MobileView™ Tethered Operator Terminals are mobile devices that help increase operator productivity and provide a safe production
environment. The mobile operator interface supports the reuse of FactoryTalk View ME and FactoryTalk View Studio applications to help
reduce development costs. For more information about these terminals, see page 11.

Industrial Computers and Monitors

Visualization and computing products provide windows into critical production and process information and enterprise data. Across every
type of industry, application and manufacturing environment, these products accelerate development and enhance operation.
Application Requirements Select
ASEM™ 6300B box PCs
High-performance HMI solution in an industrial environment ASEM 6300P panel PCs
Gateway and data logging applications ASEM 6300M monitors
Fully compatible with FactoryTalk View see page 13
Fully compatible with FactoryTalk View SE and PlantPAx® templates VersaView® 5400 PCs
Hazardous locations see page 15
Conformal coating
Process and large applications 6181P industrial computers
Conformal coating see page 15
Hazardous locations 6181X industrial computers
Class 1 Division 2 / ATEX harsh environments see page 15

4 Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022

 Add Visualization to Your Control System

Thin Clients
Thin Clients work with ThinManager® software for centrally managed content delivery. Integrated display and non-display versions are
available.
Application Requirements Select
Centralized application and security management ASEM 6300T thin clients
Distributed system with low-cost, low-maintenance client devices see page 16
Centralized application and security management
Distributed system with low-cost, low-maintenance client devices VersaView 5200 thin clients
Hazardous locations see page 16
Conformal coating

Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022 5

Add Visualization to Your Control System

Notes:

6 Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022

 Graphic Terminals

PanelView™ graphic terminals offer rugged electronic interface solutions in various sizes, operator input methods, memory options, and
configurations. These robust devices are fully packaged (hardware, software, and communications) and tested for human-machine
interface (HMI) operation.

Bulletin 2715P, 2713P Bulletin 2711P Bulletin 2711P Bulletin 2711P Bulletin 2711R
PanelView 5000 PanelView Plus 7 ArmorView Plus 7 PanelView Plus 7 PanelView 800
Performance Standard

Supported Controllers
CompactLogix™ 5380 and CompactLogix 5380
ControlLogix® 5580     only
CompactLogix 5370 and ControlLogix CompactLogix 5370
5570     only
CompactLogix 5480     —
Micro800™ —    
MicroLogix™ —    
Support for multiple controllers (1)   — —
Development Environment Software
Studio 5000 View Designer®  — — — —
3.2, 4, 5.x, 6.x, 7, 8.x, 3.2, 4, 5.x, 6.x, 7, 8.x, 5.1, 6.x, 7.x, 8.x, 9.x, 10.x,
FactoryTalk® View Machine Edition (ME) — —
9.x, 10.x, 11.x, 12.x 9.x, 10.x, 11.x, 12.x 11.x, 12.x
7, 8.x, 9.x,10.x, 11.x, 12.x,
Connected Components Workbench™ — — — — 13.x, 20.x
Remote Access
Web HMI Server (Remote Viewing/ — FactoryTalk Viewpoint FactoryTalk Viewpoint FactoryTalk Viewpoint —
Control)
VNC Server     
FTP Server —   — 
Remote Desktop Client —    —
VNC Client —    —
Environmental Options
Conformal Coating     —
On-Machine™ — —  — —
Stainless-steel   — — —
Communication
EtherNet/IP, DF1
EtherNet/IP™ with DLR EtherNet/IP with DLR EtherNet/IP with DLR EtherNet/IP with DLR
Protocols DH-485, Modbus (ASCII,
Kepware Server Kepware® Server Kepware Server RTU, TCP)
(1) Support for multiple controllers is only available with the 2715P (PanelView 5510) terminal. The 2713P (PanelView 5310) terminal only supports a single controller.

Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022 7

Graphic Terminals

PanelView 5000 Terminals

PanelView™ 5000 graphic terminals (Bulletins 2715P, 2713P) offer an intuitive,
modern design and provide enhanced Logix integration that uses Studio 5000
View Designer® software (for information about software, see Related
Software on page 17). This integration lets engineers enter configurations,
such as tags and alarms, once and use them for the entire automation design.
It also helps you build modern applications with high-speed HMI buttons for
jogging applications, scalable vector graphics, and a pre-configured system
banner that provides diagnostic information.

Feature PanelView 5310 PanelView 5510

CPU X86 Single-Core X86 Dual-Core
Displays 100 screens 500 screens
Controllers 1 controller(1) 4 controllers(1)
Alarms 4000 alarms 16,000 alarms (4000 per controller)(2)
Two 10/100 Base-T, Auto MDI/MDI-X Ethernet ports
that support DLR
Ethernet 10/100 single Ethernet port (Device Level Ring), linear, or star network
topologies
7-inch…15-inch terminals: 0…55 °C (32…131 °F)
Temperature, operating 0…50 °C (32…122 °F) 19-inch terminals: 0…50 °C (32…122 °F)
Navigation button Software only Hardware and Software
(1) ControlLogix 5570, 5580 and CompactLogix 5370, 5380 or 5480 controllers running V27 firmware or later over an EtherNet/IP network.
(2) The PanelView 5510 can support up to 4000 Logix tag-based alarms or up to 1000 Logix instruction-based alarm per controller. Use Logix Designer v32 or
later for Logix tag-based alarms.

All PanelView 5000 terminals include the following:

• Tightly integrated control and design environment for information sharing between the terminal and the Logix platforms
• Studio 5000® environment provides one point of access for both Studio 5000 View Designer® and Studio 5000 Logix Designer®
applications
• PDF viewer to view PDF files included as part of the View Designer project.
• Displays with Automatic Diagnostics automatically show control system status when used with Logix controllers, version 33 and later.
• Conformal coating available for all terminal sizes
• Virtual Network Computing (VNC) server
• Stainless steel versions available for PanelView 5510 9-in. and 12-in. wide units. All sizes available with conformal coating and
brandless options.
• HTML5-compatible web browser for displaying web pages, mp4 videos, and IP camera streams (PanelView 5510 terminals only with
version 8 firmware, or later)

For accessories, technical specifications, certifications, and environmental specifications on the PanelView 5510 terminals, see the
PanelView 5510 Terminals Specifications Technical Data, publication 2715P-TD001.
For accessories, technical specifications, certifications, and environmental specifications on the PanelView 5310 terminals, refer to the
PanelView 5310 Specifications Technical Data, publication 2713P-TD001.

8 Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022

 Graphic Terminals

PanelView Plus 7 Performance Terminals

PanelView Plus 7 (Bulletin 2711P) performance terminals are operator interface
terminals. They monitor and control devices that are attached to ControlLogix and
CompactLogix controllers on an EtherNet/IP network. Animated graphic and text
displays provide operators a view into the operating state of a machine or process.
Operators interact with the control system by using touch screen or keypad input. For
information about software, see Related Software on page 17.

Features include the following:

• FactoryTalk View Machine Edition software provides a familiar environment for creating HMI applications .
• FactoryTalk ViewPoint web server enables remote web browsers to view and interact with user-generated displays.
• Windows 10 IOT LTSC Core operating system (Series B only). Series A terminals come with Windows CE.
• Connection to ControlLogix or CompactLogix controllers.
• Ethernet communication that can support Device Level Ring (DLR), linear, or star network topologies.
• Web browser (full-screen only).
• VNC Client and Server.
• Conformal-coating available for all DC power, touch-only terminals, and the 15-inch DC power, touch/keypad terminal.
• Stainless steel, hygienic, brandless, DC-power, and conformal-coating are available for the 9-in. wide-screen, touch-only units and the
12-in. wide-screen, touch- only units. Stainless steel versions of the 10-in and 15-inch touch-only units will be available in the near
future.

For information about software, see Related Software on page 17).

For accessories, technical specifications, certifications, and environmental specifications on the PanelView Plus 7 Performance terminals,
refer to the PanelView Plus 7 Performance Terminals Technical Data, publication 2711P-TD009.

ArmorView Plus 7 Terminals

The ArmorView Plus 7 terminal (Bulletin 2711P) provides
NEMA4/IP66 ingress protection. You can mount the terminal on an
arm mount system, a wall, or a pedestal. An optional VESA kit is
available for operators who prefer to mount the terminal on a
VESA-compatible bracket (purchased separately).

The ArmorView Plus 7 terminal is based on the PanelView™ Plus 7

Performance terminal. The ArmorView Plus 7 terminal also
includes lighted, twist-to release E-stop with N.O., N.C., and self-
monitoring contact blocks.

For information about software, see Related Software on page 17).

For accessories, technical specifications, certifications, and environmental specifications on the PanelView Plus 7 Performance terminals
and the ArmorView Plus 7 terminal, refer to the PanelView Plus 7 Performance Terminals Technical Data, publication 2711P-TD009.

Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022 9

Graphic Terminals

PanelView Plus 7 Standard Terminals

PanelView™ Plus 7 Standard terminals (Bulletin 2711P) are operator interface
devices. They monitor and control devices that are attached to
ControlLogix® and CompactLogix™ controllers on an EtherNet/IP network.
Animated graphic and text displays provide operators a view into the
operating state of a machine or process. Operators interact with the control
system by using touch screen input.

PanelView Plus 7 Standard terminals include these features:

• Terminal functionality permits connection to 1 controller, 100 screens,
and 500 alarms.
• FactoryTalk View Machine Edition software provides a familiar environment for creating HMI applications.
• Windows CE operating system with desktop access for configuration and third-party applications.
• Ethernet communication that supports linear, star, and ring network topologies.
• PDF viewer to access PDF files that are stored on the terminal.
• Screen size options down to 4” diagonal.
• Terminals are available with an Allen-Bradley® label, or with no label.

For information about software, see Related Software on page 17).

For accessories, technical specifications, certifications, and environmental specifications on the PanelView Plus 7 Standard terminals, refer
to the PanelView Plus 7 Standard Terminals Technical Data, publication 2711P-TD008.

10 Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022

 Graphic Terminals

PanelView 800 Terminals

The PanelView 800 graphic terminals (Bulletin 2711R) features a full line of 4-inch, 7-inch,
and 10-inch displays. Preferred integration with Allen-Bradley® MicroLogix™, Micro800®,
CompactLogix™ 5370, and SLC™ 500 families of logic controllers offers a control and
visualization solution for various applications. The PanelView 800 platform includes the
Connected Components Workbench™ software as the common programming software.

Other key features include the ability to do the following:

• Secure information on screens with user name and password protection.
• Remote monitoring with Virtual Network Computing (VNC) server.
• Alert operators with alarm messages that include embedded variables and an alarm status/history.
• Upload and download groups of data or parameter settings within the recipe feature.
• Use Connected Components Workbench software, the integrated design and configuration software that offers HMI programming and
controller programming within the same common platform.

For information about software, see Related Software on page 17).

For accessories, technical specifications, certifications, and environmental specifications on the PanelView 800 terminals, refer to the
PanelView 800 Terminals Technical Data, publication 2711R-TD001.

MobileView Tethered Operator Terminals

The MobileView™ terminals (Bulletin 2711T) have a rugged design with Microsoft® Windows® 7
Embedded Standard. The MobileView terminal features include a 3-position enable switch, touch
and function keys, and stop push buttons. These features let operators access the safety system
of the machine and the general interface to the control system.

The MobileView terminals are ideal for various applications, including:

• Operator panel for machines and plants
• Teach and programming panel for robots
• Test, maintenance, and startup
The MobileView terminals adapt to specific applications by using configurable operating and control elements. A cable and junction box are
required for the operation of a MobileView terminal.
For accessories, technical specifications, certifications, and environmental specifications on the MobileView tethered operator terminals,
refer to the MobileView Tethered Operator Terminals and Junction Boxes Technical Data, publication 2711T-TD001.

Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022 11

Graphic Terminals

Notes:

12 Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022

 Industrial Computers, Monitors, and Thin Clients

ASEM 6300 Industrial PCs

Combine ASEM™ 6300 industrial PCs and thin clients with FactoryTalk® View human-machine interface (HMI) software and ThinManager®
thin-client management software to create a complete visualization system.

The industrial computers come as non-display (box PC) or integrated display (panel PC) form factors and offer solutions for the physical
limitations and requirements of your environment.
ASEM 6300 Industrial PC Features
ASEM 6300B Box PCs ASEM 6300P Panel PCs

Feature

Atom, Celeron processors or Core i3, i5

Processor and i7 dual and quad core 7th Core i3, i5, and i7 Intel processors
generation 64-bit processors
System memory - RAM Up to 32 GB Up to 32 GB
Mass storage Up to 1 TB Up to 1 TB
Aluminum
Aluminum True Flat
Front panel — Aluminum and Glass True Flat
Aluminum glass
Stainless steel
IB65
Protection grade options — IB66
Single DisplayPort - 2 x USB 3.0 (Type-A) USB 3.0 (Type-A)
Ports Dual DisplayPort - 4 x USB 3.0 (Type-A) USB 2.0 (Type-A)
Power 24V DC (18...32V DC) isolated 24V DC (18V to 32V DC) isolated
DIN rail mount
Mounting Wall mount (single Display Port model) Panel mount

For accessories, technical specifications, certifications, and environmental specifications on the ASEM 6300 products, see the ASEM 6300
Industrial PCs, Thin Clients, and Monitors Specifications Technical Data, publication 6300-TD001.

Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022 13

Industrial Computers, Monitors, and Thin Clients

ASEM 6300 Industrial Monitors

The ASEM 6300M industrial monitors include a ten-point multitouch screen that can also be
operated with gloves. The touch screens are pre-calibrated so that recalibration is not
necessary. These monitors are optimized to work with the ASEM 6300 industrial PCs and thin
clients to create a visualization, maintenance, control, or information computing solution.

ASEM 6300M Industrial Monitor Features

Feature ASEM 6300M Monitors
Aluminum
Front panel Aluminum glass
Stainless-steel
IP65
Protection grade options IP66K
IP69K
DVI
Video input DisplayPort
Ports USB 2.0
Power 24V DC Isolated 100V / 230V AC

For accessories, technical specifications, certifications, and environmental specifications on the ASEM 6300 products, see the ASEM 6300
Industrial PCs, Thin Clients, and Monitors Specifications Technical Data, publication 6300-TD001.

14 Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022

 Industrial Computers, Monitors, and Thin Clients

Industrial Computers for Specific Environments

Our industrial computers offer solutions for the physical limitations and
requirements of your environment. Non-display computers provide various
options in form factors, RAM, storage, performance, operating temperatures
and optical drives. Integrated display computers are available in different
screen sizes, storage options, performance packages, and models with built-in
keypads.

Industrial Computers Features

Feature VersaView® 5400 Industrial Computers 6181P Integrated-Display Industrial 6181X Hazardous Location Computers
Computers

Performance: Intel Core™ i3-4102E

Processor Intel® quad core Atom E3845; 1.91 Ghz Intel Core i3-5010U
Advanced: Intel Core i7-4700EQ
Performance: DDR3 (4/16)
System memory - RAM 4 GB DDR3 (8/16)
Advanced: DDR3 (8/16)
32 GB SLC™, 2.5-in. SATA or 256 GB MLC,
Mass storage 128 GB MLC SSD 128 GB MLC, 2.5-in
2.5-in
1x DisplayPort RS-232 RS-232
1x VGA (non-display only) USB 3.0 USB 2.0
2x USB 2.0
Ports Ethernet LAN, 1 Gb Ethernet LAN, 1 Gb
1x USB 3.0 DVI DVI
1x RS-232 DisplayPort DisplayPort
2x 1 Gb Ethernet
Power 24V DC AC or DC DC
• Panel mount (display models)
• Panel mount (display models)
• DIN rail (non-display models)
• Wall mount (non-display models)
• VESA (IP20) • Panel mount (display models)
Mounting • Table
• Bookshelf • Wall mount (non-display models)
• Bookshelf
• VESA
• Machine
• Machine

For accessories, technical specifications, certifications, and environmental specifications, see the Industrial Computers and Monitors
Specifications Technical Data, publication IC-TD001.

Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022 15

Industrial Computers, Monitors, and Thin Clients

Thin Clients
The thin clients are ideal for ThinManager® distributed applications. You can have multiple thin clients configured across your plant or
facility with various roles with the convenience of having them all maintained by the ThinManager server. All content remains on the server
so downtime is reduced if a failure occurs.

Thin Client Features

ASEM 6300T Thin Clients VersaView 5200 Thin Clients

Feature

Intel Atom Celeron Apollo Lake platform Intel single core Atom E3815; 1.46 Ghz
Processor with x7-E3950 1.6 GHz processors
System memory - RAM 4 GB/8 GB 2 GB
Mass storage None None
1x DisplayPort
2x USB 2.0
Single DisplayPort - 2 x USB 3.0 (Type-A) 1x USB 3.0
Ports Dual DisplayPort - 4 x USB 3.0 (Type-A) 1x RS-232
2x 1 Gb Ethernet
Power 24V DC (18...32V DC) isolated 24V DC
DIN rail mount
Mounting Wall mount (single Display Port model) Wall, VESA, DIN Rail, Bookshelf, Machine

For accessories, technical specifications, certifications, and environmental specifications on the ASEM 6300 products, see the ASEM 6300
Industrial PCs, Thin Clients, and Monitors Specifications Technical Data, publication 6300-TD001.

For technical specifications, certifications, and environmental specifications on the VersaView computers, see the Industrial Computers and
Monitors Specifications Technical Data, publication IC-TD001.

16 Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022

 Related Software

With the myRockwell Software Portal from Rockwell Automation, you can find our simplified and flexible software solutions all in a familiar
online ecommerce experience. The portal offers:
• Web-based Quoting and License Management
• Recommended Products and Add-ons
• Simple and Dynamic Software Activations
• Access to Software Updates

Studio 5000 View Designer

Studio 5000 View Designer® software is the design
environment for the PanelView® 5000 family of operator
terminals. The integration of the PanelView 5000 terminals
with Studio 5000 View Designer software helps build modern
applications more easily and improve operator performance.

The View Designer application provides an intuitive, modern

design environment and enhances integration between the
control system and operator interface to improve
programming efficiency and runtime performance.
• Preconfigured banner, alarm summary and diagnostic
displays help reduce design time
• Simplify engineering with shared tags between HMI
and controller
• Eliminate alarm programming and reduce network traffic with Logix-tag based alarms
• High-speed button control provides quick response and feedback for machine jogging applications
• Create custom, re-usable add-on graphics to save engineering time and promote consistency
• Configure the runtime web browser to display web pages, HTML help files, videos, and IP camera streams. Display content stored
locally on an SD card or USB drive, on a local server, or on the Internet.
• Emulation capabilities enable users to test run a project without downloading to decrease overall project risks
• Data logging and historical trending features show historical data immediately when the screen is displayed, helping decrease
troubleshooting time
• Built-in VNC server enables a remote VNC client for monitoring and troubleshooting
• Studio 5000 View Designer is included, along with Studio 5000 Logix Designer, as part of Studio 5000. No additional licensing or
activation is needed.

For product options, see Studio 5000 Ordering Guide, 9324-QR001

FactoryTalk View – HMI Software

FactoryTalk® View performance and visibility HMI software, including FactoryTalk View Machine Edition, FactoryTalk View Site Edition,
FactoryTalk ViewPoint, and FactoryTalk View Studio are designed with a common look, feel, and navigation to help speed HMI development
and training time.

Supporting the Rockwell Automation® Integrated Architecture® platform, FactoryTalk View software is part of the scalable and unified suite
of monitoring and control solutions that are designed to span machine-level applications through supervisory level HMI applications across a
network. This suite of HMI software products offers you a common development environment, application reuse, and architecture to
increase productivity, reduce operation costs, and improve quality.

For product options, see FactoryTalk View Ordering Guide, FTALK-QR003

Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022 17

Related Software

FactoryTalk View Machine Edition Software

FactoryTalk View Machine Edition (ME) software is the runtime environment for
HMI applications. FactoryTalk View ME software is automatically installed and
activated on PanelView Plus terminals. FactoryTalk View ME software activation
is required when running HMI applications on industrial computers. FactoryTalk
View ME software supports both open and embedded operator interface
solutions for monitoring and controlling individual machines or small
processes.

FactoryTalk View Supervisory Edition Software

FactoryTalk View Site Edition (SE) software is a supervisory-level HMI software
for monitoring and controlling distributed-server/multi-user applications.
FactoryTalk View SE scales from a stand-alone HMI system to a distributed
visualization solution. FactoryTalk View SE software enables you to take
advantage of mobility, virtualization to meet HMI needs in process, batch, and
discrete applications and deliver critical visibility when and where you need it.

FactoryTalk ViewPoint Software

An add-on to FactoryTalk View SE software and PanelView Plus 7 terminals,
FactoryTalk ViewPoint software provides on-demand access to important information about your plant or process from a web browser. Plant
managers, supervisors, OEMs, system integrators, and other key stakeholders can now access, monitor, and interact with plant floor
operations from virtually any location. The thin-client configuration means no client software to install and maintain:
• Fully scalable, animated web applications viewable in the office, at home, or on the road.
• Gives managers, OEMs, and system integrators read and write capability to both view and control real-time plant floor operations by
logging in via an internet browser.
• Gain fast access to real-time information by using a standard web browser.
• Supports multiple browsers and client devices for increased flexibility.
• Lets FactoryTalk View projects be web-enabled without requiring application changes.

FactoryTalk View Studio Software

FactoryTalk View ME and FactoryTalk View SE software share a common design
environment called FactoryTalk View Studio for creating applications. The
ability to edit and reuse projects in FactoryTalk View Studio improves
portability between embedded machine and supervisory HMI systems. With
FactoryTalk View software, all products in the suite are built on the same
integrated, scalable architecture. Application developers can import entire
machine-level applications into supervisory-level applications or drag
individual components and drop them right into supervisory projects, which
saves development time and reduces engineering and training costs. Runtime
files can be generated to run on a PanelView Plus terminal or industrial
computer.

18 Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022

 Related Software

Thin Client Management Software

ThinManager® thin client management software allows control and security in a sustainable and scalable platform regardless of the size of
your industrial environment or number of facilities. The thin client architecture gives users the applications and tools familiar to them in a
format that reduces management and maintenance costs while it increases security. ThinManager software acts as a centralized
management solution that seamlessly integrates with industrial computers and thin clients.
Administrators can deliver multiple applications, with customized layouts to any terminal. Content can be easily displayed across multiple
monitors and touchscreens or securely delivered to mobile devices, based on the location of the user. ThinManager software also supports
multiple forms of user authentication. Coming in the near future, ThinManager will be available as part of the ThinManager Logix PinPoint™
solution, which bundles ThinManager with FactoryTalk View SE and Studio 5000 Logix Designer.

ThinManager increases security by never storing content on end devices. All terminals managed by ThinManager connect to centralized
servers (HMI, MES, CMMS, etc.) and only access content when authenticated by ThinManager. ThinManager-managed terminals can also be
replaced in under two minutes, seriously reducing unplanned downtime in your industrial facility.

Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022 19

Related Software

Notes:

20 Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022

 Visualization Solutions Selection Guide

Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.

Resource Description
PanelView 5310 Terminals Specifications Technical Data, publication Provides technical specifications, certifications, and environmental specifications for the
2713P-TD001 PanelView 5310 terminals.
PanelView 5510 Terminals Specifications Technical Data, publication Provides technical specifications, certifications, and environmental specifications for the
2715P-TD001 PanelView 5510 terminals.
PanelView Plus 7 Performance Terminals Technical Data, publication Provides technical specifications, certifications, and environmental specifications for the
2711P-TD009 PanelView Plus 7 Performance terminals.
PanelView Plus 7 Standard Terminals Technical Data, publication Provides technical specifications, certifications, and environmental specifications for the
2711P-TD008 PanelView Plus 7 Standard terminals.
MobileView Tethered Operator Terminal Technical Data, publication Provides technical specifications, certifications, and environmental specifications for the
2711T-TD001 MobileView tethered operator terminals.
Provides technical specifications, certifications, and environmental specifications for the
PanelView 800 Terminals Technical Data, publication 2711R-TD001 PanelView 800 terminals.
Industrial Computers and Monitors Specifications Technical Data, Provides technical specifications, certifications, and environmental specifications for the
publication IC-TD001 industrial computers and monitors.
Provides information on how to convert PanelView Plus 6 terminals to the new generation
PanelView Plus 6 Terminals to PanelView Plus 7 Terminals Catalog Number terminals: PanelView Plus 7 Performance terminals and PanelView Plus 7 Standard
Conversions Migration Guide, publication 2711P-AP004 terminals.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website, rok.auto/certifications. Provides declarations of conformity, certificates, and other certification details.

You can view or download publications at rok.auto/literature.

Rockwell Automation Publication VIEW-SG002B-EN-P - November 2022 21

Rockwell Automation Support
Use these resources to access support information.
Technical Support Center Find help with how-to videos, FAQs, chat, user forums, and product notification updates. rok.auto/support
Knowledgebase Access Knowledgebase articles. rok.auto/knowledgebase
Local Technical Support Phone Numbers Locate the telephone number for your country. rok.auto/phonesupport
Literature Library Find installation instructions, manuals, brochures, and technical data publications. rok.auto/literature
Product Compatibility and Download Center Download firmware, associated files (such as AOP, EDS, and DTM), and access product rok.auto/pcdc
(PCDC) release notes.

Documentation Feedback
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the
form at rok.auto/docfeedback.

Allen-Bradley, ASEM, CompactLogix, Connected Components Workbench, ControlLogix, expanding human possibility, FactoryTalk, Integrated Architecture, Micro800, MicroLogix, MobileView,
PanelBuilder, PanelView, Rockwell Automation, Rockwell Software, SLC, Studio 5000, Studio 5000 Logix Designer, Studio 5000 View Designer, ThinManager, and VersaView are trademarks of
Rockwell Automation, Inc.
EtherNet/IP is a trademark of ODVA, Inc.
Excel, Microsoft, and Windows are trademarks of Microsoft Corporation.
SD is a trademark of SD-3C LLC.
Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.

Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752, İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur

Publication VIEW-SG002B-EN-P - November 2022

Supersedes Publication VIEW-SG002A-EN-P - February 2022 Copyright © 2022 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.