DESCRIPTIOON

E3000 (with touch-screen control panel + motorized C-arm)

HVG-300 Included
Standard Electrodes Included
Standard Accordion Silicon Membranes Included
Silicon Oil Included
Operating Manual Included
Econolith Parts Kit Included
X-Ray Adapter Included
Installation and Maintenance Manual Included
Built-in ECG Monitor Included

Treatment Table Included

Endo-Urolpgy with Trendelburg & Lateral Roll Movement (TT-5)
TT-3 Treatment Table
Gynecological Leg Support (2x)
Drain Bag Holder
Uro Catcher-Drain bags (3x)
OR
TT-4 Treatment Table with Trendelburg
Remote control TT-4 Assay
PVC movable plate TT cut-out cover
TT-4 Head Support
TT-4 Leg Support

Visionspec - Tolt / FULLY Motorized C-arm

9" Image Intensifier (9"), Stationary Anode Included
Guppy Digital Camera F-146B Included
Monitor 19"/23" Included

Computerized Console
Remote Concole Stand Included

Ultra Sound System Included

USG Unit

High-End' ROTATING Ultra Sound Supporting Arm for E3000 Included

 June 6, 2019
 
Medispec E3000 Lithotripter         
Basic system technical specifications 
 
General  
Dimensions  Height:  1215.5 mm  
Width:   920 mm 
Depth:   780 mm 
Weight  ~150 Kg 
Mobility  On wheels allowing displacement 
Display type and size  10.2" touch screen 
Interface and control   Digital control windows based software  
Electrical Supply 
Voltage (Volts AC)  100‐240 Single Phase 
Line Frequency (Hz)  60/50 
Current (Amps)  10 
Isolation Level  Primary‐Secondary:  2×MOOP,  Primary‐Earth:  1×MOOP, 
Secondary‐Earth: 1×MOOP 
Electrical Connection:    5 m multi‐wire cable 
Performance 
Shockwave Source  Electrohydraulic  
Spark Voltage  12 – 22.5 KV 
Triggering   Non‐synchronized at 60/90/120 P.P.M. or Synchronized to ECG 
Acoustic Pressure  12 kV‐ 365 BAR 
14 kV‐  425 BAR 
16 kV‐  590 BAR 
18 kV‐  710 BAR 
20 kV‐  820 BAR 
22.5 kV‐ 910 BAR 
Acoustic Noise (@ 2 meter)  80‐89 db (depending on energy level in use) 
Focal Point Depth  135 mm (adjustable to 170mm for obese patients) 
Focal size  13 X 60 mm 
Coupling   Automatic pressure controlled 
Targeting  Removable pointer 
Compliance with Standards 
ISO 13485  MDD (93/42/EEC) (CE) 
IEC 60601‐1  IEC 60601‐1‐2 
ISO 14971  IEC 60601‐2‐36 
ISO 10993‐1   
Electrical shock degree of protection classification 

Membrane 
  
Type BF applied part 

ECG Electrodes 
 
Type CF (defibrillation proof) applied part 
Electrical safety classification 
Class I 
 
 

SW‐6‐X470 A02  1 
 June 6, 2019
Medispec Ultrasound Arm 
 
Ultrasound Arm 
2 axes of movement 
Real time ultrasound allowing targeting, focusing and monitoring 
Simultaneous real‐time ultrasound and X‐Ray imaging.  
Can be chosen from a list of approved systems. 
Planar axis movement range  220O
Rotation axis range  360O
 
 
 
 
Notes:  
 These  technical  specifications  are  for  reference  only  –  for  the  complete  updated 
specifications refer to the operating manual.  
 
 Data subject to change without notice 
 

SW‐6‐X470 A02  2 
 Medispec Visionspec C‐Arm 
Technical specifications 

Physical
Dimensions Height: 1844 mm (+400 mm)
Width:   772 mm
Length: 2014  mm (+270 mm)
Arm dimensions Depth: 825 mm
Free space between monoblock and I.I: 779 mm
Arm movements Motorized and software controlled (+ hand-held remote
control):
Vertical travel: 400 mm
Horizontal travel: 270 mm
Tilt motion (standalone mode) CW : 200 O/ CCW: 200 O
Tilt motion (lithotripsy mode) CW : 18 O/ CCW: 32 O
Orbital rotation: -90O/+25O (±1O)
Manual:
Lateral oscillation (Wig-Wag non-motorized): ± 15O
Weight 360 Kg
Electrical Supply
Voltage (Volts AC) (*) 100, 110, 115, 120 VAC / 16A Max
220, 230, 240 VAC / 8A Max
Line Frequency Single Phase 50-60 Hz
Max power consumption 1.75 KVA
Line power supply stabilization Automatic
Line resistance < 0.6 Ohm
(*) factory set – refer to the label on your device.

Monoblock / Fluoroscopy Features

Nominal power 4.2 KW
Anode type Stationary
Focal size 0.5 / 1.5 mm
Filament power supply 400 Hz
kV range 40-110 KV
Current (fluoroscopy) 0.2-4 mA / 8-14 mA (snapshot)
Current (pulsed fluoroscopy) 4-8 mA
Maximal anode dissipation 270 W
Max power (fluoroscopy) for X-Ray continuous/snapshot 0.44 kW/0.88 kW for 0.5s (snapshot)

XR‐6‐X470 A06  1 
 Anodic heat capacity 30 kJ
Anodic nominal power (for 0.1 sec) 780 W
Operating Frequency 40 KHz
Monoblock thermal capacity (with heat sink) 500 kJ
Thermal safety 57ºC±3ºC
Continuous thermal dissipation (40kV; 1 mA) (with heat 60 W
sink)
Maximum sheath temperature 60ºC
Monoblock inherent Filtration 1.8 mmAl
Total filtration (monoblock inherent + 2mm Al) 3.8 mmAl
Fluoroscopy Grid
Ratio 8:1
Lines/cm 40
Focusing 80 cm
Iris With automatic positioning according to the
selected I.I field

Image Intensifier (I.I)

Size 9" (9/6/4")
Number of input fields 3
Nominal dimension of input field 9" Mode: 230mm min
6" Mode: 160±5 mm
4" Mode: 120±5 mm
Usable dimension of input field 215/145/100 mm
Central resolution 9" Mode: 48 Lp/cm
6" Mode: 56 Lp/cm
4" Mode: 66 Lp/cm
High conversion factor (GX) 28 cd/m2/µGy/s
Contrast ratio (10% area) 25:1
Contrast ratio (10mm dia.) 16:1
240 cd·m-2 / mR·s-1
Conversion Factor (Gx)
28 cd·m-2 / µGy·s-1
DQE (ICE Standard) 65%

Camera Chain
Camera Digital with 1.4 M pixels 1/2" IEEE 802.3 1000BASE-T
15 FPS
Display 23" LCD HD Wide monitor –1920 X 1080 pixels
Software & Functions
1. Windows based
2. 250GB SSD hard disk
3. Expose control
4. Image enhancement (brightness, contrast, averaging)
5. Image display manipulation (vertical/horizontal inversion, zoom 300%, full screen, etc.)
6. Stone measurement
7. Real-time video + Freeze
8. Arm control
9. Save images
10. Management of patients database including treatment sessions data collection (store)
11. Patient data report generation
12. Export treatment files to DICOM 3.0 (*)
13. Export images in JPG format (BMP optional)
14. DICOM 3.0* Worklist support
15. US analog video support (for external ultrasound)
16. Auto location (**)
17. Remote operation of the treatment table (**)
18. Lithotripter counter display and reset (***)
(*) DICOM is optional
(**) For Medispec' treatment table
(***) For Medispec' complete ESWL system

XR‐6‐X470 A06  2 
 Compliance with Standards
ISO 13485
MDD (93/42/EEC) (CE)
IEC 60601-1
IEC 60601-1-2
IEC 60601-1-3
ISO 14971
 
Notes:
These technical specifications are for reference only – for the complete updated specifications refer to
the operating manual.

Data subject to change without notice

 
 

XR‐6‐X470 A06  3