Disclaimer
Our policy is one of continuous development. Accordingly the design of our products may change at any time.
Whilst every effort is made to produce up to date literature, this document should only be regarded as a guide and is intended
for information purposes only.
Its contents do not constitute an offer for sale or advice on the application of any product referred to in it. We cannot be held
responsible for any reliance on any decisions taken on its contents without specific advice.
Page 1 of 13 676587965.xls 07/03/2023
Cortec Phase 1
Information required with order
Versions Order - No.
P12x Overcurrent protection P12 3 0 0 1
Variant
Expert - 3 Phase and Earth Overcurrent 3
Earth current input
0.1 - 40 Ion A
0.01 - 8 Ion B
0.002 - 1 Ion C
Auxiliary voltage Digital input voltage
24 - 60 Vdc 24 - 60 Vdc A
48 - 150 Vdc 48 - 150 Vdc F
125 - 250 Vdc /100 - 250 Vac 105 - 145 Vdc H
130 - 250 Vdc /100 - 250 Vac 48 - 250 Vdc / 48 - 250 Vac M
48 - 150 Vdc 48 - 150 Vdc (ac immune) T
130 - 250 Vdc /110 - 250 Vac 48 - 250 Vdc (ac immune) U
Communication interface
MODBUS 1
KBUS / COURIER 2
IEC 60870-5-103 3
DNP3 4
Language
French 0
English / American 1
Spanish 2
German 3
Italian 4
Russian 5
Polish 6
Portuguese : not available 7
Dutch 8
Czech A
Hungarian B
Greek C
Turkish : not available E
Platform
Phase 1 1
Page 2 of 13 676587965.xls 07/03/2023
Order form MiCOM P123
Ready-to-use configuration
P12x Overcurrent
protection P12 3 0 0
Variant
Expert - 3 Phase and Earth Overcurrent 3
Earth current input
0.1 - 40 Ion A
0.01 - 8 Ion B
0.002 - 1 Ion C
Auxiliary voltage Digital input voltage
48 - 250 Vdc / 48 - 240 Vac 105 - 145 Vdc H
48 - 250 Vdc / 48 - 240 Vac 24 - 250 Vdc T
48 - 250 Vdc / 48 - 240 Vac 110 Vdc -30% / +20% V
48 - 250 Vdc / 48 - 240 Vac 220 Vdc -30% / +20% W
24 - 250 Vdc / 48 - 240 Vac 24 - 250 Vdc / 24 - 240 Vac Z
Communication interface
MODBUS 1
KBUS / COURIER 2
IEC 60870-5-103 3
DNP3 4
Language
French 0
English / American 1
Spanish 2
German 3
Italian 4
Russian 5
Polish 6
Portuguese 2) 7
Dutch 8
Czech A
Hungarian B
Greek C
Chinese 5) D
Turkish 3) E
Platform
SE look&feel Phase 2 2
SE look&feel Phase 2 with larger LCD 3
Latest Major Software release
V ?.? ?
Latest Minor Software release
V ?.? ?
Mounting option
None (default) 4) 0
Pre-fixed HMI (no withdrawability) 1
Sealed cover 4) 2
Pre-fixed HMI + Sealed cover 3
NOTES :
2)
Only available with Phase 2 Hardware and software V11.D or later
3)
Only available with Phase 2 Hardware and software V11 or later
4)
Not available with Auxiary / Digital input code T
5)
Only available with Phase 2 Hardware with larger LCD
07/03/2023
Order form configurator MiCOM P123
Ready-to-use configuration
1-3 4 5 6 7 8 9 10 11 12 13 14
Expert Three Phase and Earth Overcurrent Relay P12 3 A 0 0 Z 1 1 2 E C 0
SAP PART NUMBER E123A00Z112EC0
Earth Current Input
0.1 to 40 Ion
0.01 to 8 Ion A
0.002 to 1 Ion
Auxiliary Voltage / Digital Input Voltage
48 - 250 Vdc / 48 - 240 Vac 24 - 250 Vdc / 24 - 240 Vac
24 - 250 Vdc / 48 - 240 Vac Z
Communication
MODBUS
KBUS / COURIER 1
IEC60870-5-103
DNP3
Default HMI (Human / Machine Interface) Language
French
English / American
Spanish
German
Italian
Russian
Polish 1
Portuguese
Dutch
Czech
Hungarian
Greek
Chinese
Turkish
Hardware Version
Phase 2 with standard display 2
Software Version
Software version V14.C
Software version V14.B
Software version V14.A
Software version V13.B
Software version V13.A EC
Software version V12.F
Software version V12.E
Software version V11.E
Software version V11.D
Mounting option :
None (default)
Pre-fixed HMI (no withdrawability) 0
Sealed cover
Pre-fixed HMI + Sealed cover
07/03/2023
Master Text
P123A00Z112EC0
Expert Three Phase and Earth Overcurrent
Earth Current Input :
0.1 to 40 Ion x Nominal Earth Current
Auxiliary Voltage :
24 - 250 Vdc / 48 - 240 Vac
Digital Input Voltage :
24 - 250 Vdc / 24 - 240 Vac
Communication Protocol :
MODBUS
Default HMI Language :
English / American
Hardware Version :
Phase 2 with standard display
Software Version :
#N/A
Mounting option :
None (default)
Page 5 of 13 676587965.xls 07/03/2023
P123A00Z112EC0 Quantity
Item Description
EGN0382004 Case and Chassis 1
E518414101 Assy front interface 20TE 1
E20720813Z Power supply board 1
E207134201 Extension board 1
EZB5321126 Screw M3 X 16 recessed pan head steel 4
EZB5017036 Washer 4
EZB4018118 Self tapping screw 12
E517725101 Product Label 4
E517837101 Extractor 1
E843992001 Cable Ties 3
E517719101 Screw Pack 1
E518326101 Connection Diagram 1
EA00026928 VCI Bag 1
E518327101 20TE Cardboard Box 1
E517060101 Operator label 4
1
Location
1, 4
2, 3, 6, 11, 12, 23
7
15
9
13
10
17
23
Issue : 001 - As at 03/12/98
Issue : 002 - As at 14/12/98 - Adding "XX" for digits 6 & 7.
Issue : 003 - As at 06/01/99 - Adding and amending available from dates for language variants.
Issue : 004 - As at 03/06/99 - Digits 5 & 7 exchanged, skeletons were ANNNXXAAXXX, model ranges were P120/121/123, so
Issue : 005 - As at 16/12/99 - Dutch language variants added effective 01/01/2000.
Issue : 006 - As at 06/05/02 - DNP3.0 Protocol added effective 06/05/2002.
Issue : 007 - As at 11/03/03 - Hungarian & Greek languages added effective ??/??/????.
Issue : 008 - As at 04/07/03 - Languages availability amended to instructions from Bassam Dhaiby's e-mail dated 01/08/03
Issue : 009 - As at 14/01/04 - "T","U" & "H" variants of Aux supply voltage with "special digital inputs voltages" added.
Issue : 010 - As at 27/02/04 - Protocol text on MIFAS Data worksheet corrected to show DNP3.0.
Issue : 011 - As at 19/08/04 - "EA" specials restricted to P122 & P123 Variants only per F. Bel e-mail of 18/08/04, Livery option
Issue : 012 - As at 03/09/04 - Language option was "Greek: (AVAILABLE ONLY FOR P123 !)" per M Morlotti's e-mail dated 31
Issue : 013 - Areva livery was available from 04/10/04 & Alstom until 01/11/04 per Gary Jones e-mail of today - 21/10/04.
Issue : 014 - Areva livery was denoted by digit #11=2, now reverted to #11=1 per G Jones e-mail of 19/01/05 - 20/01/05.
Issue : 015 - Bills of Material sheets added - 20/01/05.
Issue : 016 - Term "special EA" replaced by "ac immune" per A Darby's e-mail of 25/11/05 - 28/11/05.
Issue : 017 - Reformatted spreadsheet so that Hardware Version is the first choice to be made - 15/02/06.
Issue : 018 - Cortec worksheets added, BOM worksheets deleted - 15/02/06.
Issue : 019 - Note added to disclaimer, text changes to list boxes - 18/02/06.
Issue : 020 - Phase 1 Language options amended and DI options to mirror cortec as per JP Petit e-mail - 20/02/06
Issue : 021 - Turkish language option added to all EXCEPT P120. Configurator amended to "hide" digits 13 & 14 fo
Issue : 022 - Digital Input voltages retrospectively corrected per J-P Petit's e-mail of 17/05/06 - 17/05/06.
Issue : 023 - Digital Input voltages retrospectively corrected per J-P Petit's e-mail of 19/05/06 - 31/05/06.
Issue : 024 - Language options retrospectively corrected to make the same for phases I and II (except for Turkish o
of 29/08/06 - 29/08/06.
Issue : 025 - Language options retrospectively corrected to make Chinese not available in phase II for P120, per J-
Issue : 026 - Date Drivers amended to remove "… :V10a ----> Aa" from "Latest firmware release ...", per J-P Petit's
Issue : 027 - Date Drivers amended to block Phase II hardware with graphical HMI & option "T" of Phase II, per J-P
Issue : 028 - Date Drivers amended to define SW versions for Phase II hardware, per J-P Petit's e-mail of 12/09/06
Issue : 029 - Date Drivers amended to retrospectively change language options for Phase 1, add "special applicatio
manufacturing unit" for options "V" and "W", per J-P Petit's e-mail of 21/09/06 - 22/09/06.
Issue : 030 - Master Text amended to show detail of software, Cortecs and Date Drivers amended to change langu
Petit's e-mail of 22/09/06 - 25/09/06.
Issue : 031 - Database tables of Digital Inputs & Auxiliary Voltages resequenced, Date Drivers tables extended to in
PCV Software displays added, per J-P Petit's e-mail and telephone conversation of 22/09/06 - 25/09/06.
Issue : 032 - Database tables of Digital Inputs & Auxiliary Voltages repopulated and Software display changed, per
Issue : 033 - Date Drivers tables extended to include Software array for each Variant and Software display changed
Issue : 034 - Master Text corrected to show Software Version properly - 29/09/06.
Issue : 035 - Date Drivers corrected to show Turkish language option as "E" and show Digital Input variants "T" and
Issue : 036 - Digital Input Voltage for option "F" retrospectively (back to 15/02/06) corrected on Cortec phases 2,3 a
02/11/06 - 10/11/06.
Issue : 037 - Separate Cortecs now for P120/1/2/3. Digital Input Voltages on Cortec phases 2,3 and Date Drivers c
Issue : 038 - Date Drivers changed per J-P Petit's e-mail dated 06/03/07 to show revised Software version (was V1
Issue : 039 - Software selectable per F Taesch's e-mail dated 25/05/07 - 30/05/07.
Issue : 040 - Software version changed per CID SBIA-743H7F. Portuguese language option removed per F Taesch
Issue : 041 - SW BC/V11.C introduced by CID SBIA-757GWN for Phase 2. Dutch, Czech, Hungarian & Greek lang
(reverts to AD/V10.D) - 19/07/07.
Issue : 042 - Cortec Phase 2 & Database amended to show revised availability message for Options V & W per F T
Issue : 043 - Second, non-preferred software for Phase 2 corrected on Date Drivers from 01/03/07 to "AE/V10.E" p
Issue : 044 - SW release V11.D phase 2 as per SBIA-79YJJ8 : addition of Portuguese language - 19/12/07
Issue : 045 - DI Voltage for phase 2 adjusted to read 24 -250Vdc / 24 - 240Vac against auxiliary voltage of 24 - 60V
Issue : 046 - Text in Date Drivers amended to remove "not yet available" from "T" options effective 11/06/07 onwar
Issue : 047 - Worksheet added showing Phase 2 equivalent of any Phase 1 configuration - 23/06/08
Issue : 048 - SW Release V11.E phase 2 as per SBIA-7FWD65 - 30/06/08
Issue : 049 - Adjustments as per F.Taesch synthesis sheet - 13/10/08
Issue : 050 - SW Release V11.F as per SBIA-7LWD9V which invalidates all previous V11.x software versions - 04/
Issue : 051 - SW V11.A & V11.C to V11.E reinstated as per SBIA-7PFBXY - 23/02/09
Issue : 052 - Correction to digital voltage lookup array on database ("A" was 24-60aux with 24-60digital) - 26/02/09
Issue : 053 - Addition of "Z" universal power supply and pre-fixed HMI option per F Taesch. Restriction of software
Issue : 054 - Universal "Z" power supply option introduction set as notional date of 01/07/09 - 18/03/09
Issue : 055 - Pre-fixed HMI option hidden on Cortec, Configurator,Phase 1 to Phase 2 Equivalent & Master Text un
Issue : 056 - SW Version 12.A released as per SBIA-7RRBTZ - 28/05/09
Issue : 057 - Notional date for Pre-fixed HMI option hidden on Cortec, Configurator,Phase 1 to Phase 2 Equivalent
Issue : 058 - Notional date for Pre-fixed HMI option hidden on Cortec, Configurator,Phase 1 to Phase 2 Equivalent
Issue : 059 - SW Version 12.B released as per SBIA-7W5D28 - 29/09/09
Issue : 060 - CID - SBIA-7WVHMA releasing universal power supply and mounting variants (effective 30/10/09) - 2
Issue : 061 - Master text worksheet corrected to include digit #14 in row 1 - 16/12/09
Issue : 062 - Addition of EGN0055002 : Chinese secondary cover as per SBIA-83SDBL - 29/03/10
Issue : 063 - Software version V12.C released as per SBIA-84QCVX - 11/05/10
Issue : 064 - Voltage options 'A' & 'F' removed as per SHAL-85EHHT - 19/05/10
Issue : 065 - 518414114 replaces 518414104 as per SBIA-88GCW3 - 16/09/10
Issue : 066 - Auxiliary Voltage rating for Universal Power Supply option, 'Z', amended to 24-250Vdc/48-240Vac as
Issue : 067 - SW Release V11.D per SBIA-8BNGW2. Phase 1 removed from configurator, SW availability updated
Issue : 068 - SW Release V11.E reintroduced per approved TOMAS request #189 - 01/09/11
Issue : 069 - SW Release V12.E per YLIU-8LU4QA - 22/09/11
Issue : 070 - SW Release V12.C per TOMAS request (190) reinstated until 30 June 2012 - 30/09/11
Issue : 071 - Tendering sheet added - 13/02/12
Issue : 072 - SW Release V12.C removed from offer (last order date passed) - 02/07/12
Issue : 073 - SW Release V12.F per SBIA-8WYFVD - 24/08/12
Issue : 074 - As per SBIA-8ZYH6M - SW versions V11.D, V11.E, V11.F, V12.D & V12.E invalidated for Chinese lan
Issue : 075 - As per SBIA-93UEJC - V12.C reanimated as ordering option - 11/02/13
Issue : 076 - Equipped PCBAs introduced - 13/08/13
Issue : 077 - SW V13.A released per XNII-9AZ4W9 ; SW versions (V10.E & V11.F) obsoleted per SBIA-9AYGDB-
Issue : 078 - SW V13.B released per XNII-9CR5CF - 11/11/13
Issue : 079 - SW V14.A released per RKLI-9JH9BN - 07/05/14
Issue : 080 - As per RKLI-9KRAXG - Graphical Display option with SW V12.F withdrawn - 12/06/14
Issue : 081 - As per RKLI-9TC5Y2 SW versions V12.C and V12.D are obsoleted - 10/02/15
Issue : 082 - SW V14.B released per RKLI-9YWGR8 - 18/08/15
Issue : 083 - SW V14.C released per RKLI-9QG5UU - 21/09/17
Issue : 084 - O2 kill reference warning added - 19/11/19
1 2 3 4 5 6 7 8 9 10 11 12 13
Cortec Landing cell : P123B00Z112DB0 P 1 2 3 B 0 0 Z 1 1 2 D B
Configurator feedback : P123A00Z112EC0 P 1 2 3 A 0 0 Z 1 1 2 E C
Cortec digit control 1 P
Cortec digit control 2 1
Cortec digit control 3 2
Cortec digit control 4 3
Earth Current Input 1 A
Constant 0 0
Auxiliary Voltage / 2 Z
DI Voltage 1
Communication 1 1
Default HMI (Human / Mac 2 1 2
Software Version 1 E C
Mounting option : 1
14
0
0 double digit in same row
5
6
7
8
9
10
11
12
13
14
15
0 16
0
0
0
0
0
0
0
0
0
0
0
0
0
0
