FOAM CHAMBERS
FEATURES
• Available in four size ranges
• Equipped with an inspection opening on the
cover plate
• Minimum operating pressure 40 psi (3 bar), maximum
operating pressure 100 psi (7 bar)
• One-piece welded chambers are available for
installations not requiring vapor seal
DESCRIPTION
Perimeter Solutions Foam Chambers are N FPA-11 Type 11 air
aspirating foam discharge devices that provide protection for
open top floating and cone roof flammable liquid storage tanks.
Foam chambers are a combination of a foam mixing chamber SPECIFICATIONS
and a foam maker with an air inlet. A removable orifice plate is The foam chamber assembly consists of the body, integral foam
located between the flange inlet and solution pipe flange, and is maker, orifice, deflector, vapor seal, gaskets and mounting
sized to deliver the required foam solution at a specified pressure. hardware. The foam chamber body is constructed of steel. The
A frangible glass vapor seal located in the foam chamber body inlet fitting is a raised face 150 lb flange, and the outlet fitting is a
prevents product vapors from entering the foam chamber body. flat faced 150 lb flange that can be bolted or welded to the storage
The vapor seal will break once the foam solution enters, filling tank. Foam chamber body has a cover plate with inspection
the foam chamber body with expanded foam. The foam flows opening for ease of inspection or access to the vapor seal. Vapor
to a deflector plate, which directs the foam to the inside of the seal is constructed from glass and designed to meet the UL
storage tank wall and fuel surface, only allowing minimum foam required burst pressure range of 10 - 25 psi (1 - 2 bar). The deflector
submergence and fuel agitation. face can be either solid or split-type and constructed from steel
that can be bolted or welded to side of storage tank.
APPLICATION
Perimeter Solutions Foam Chambers are airaspirating Type II Foam Chambers are prepared and finished with Perimeter
discharge devices that protect various types of flammable liquid Solutions red or blue enamel finish.
storage tanks including cone roof tanks (with or without internal
floaters) and open top floating roof tanks. The foam chambers are CERTIFICATIONS
typically used with bladder tank systems or balanced pressure Underwriters Laboratories, Inc. (UL) Listed - Standard 162, FM
pump systems. Approved per Approval Standard 5130.
FOAM CHAMBERS
FLOW RATES
FM APPROVED
SFS 825 RE-HEALING RF3, SFS 1240 RE-HEALING RF3,
(C = .615) 3% gpm (lpm) psi (bar) (C = .635) 3% gpm (lpm) psi (bar)
MAX ORIFICE 0.938 181 (685) 100 (7) MAX ORIFICE 1.875 680 (2574) 100 (7)
162 (613) 80 (6) 621 (2351) 80 (6)
143 (541) 60 (4) 525 (1987) 60 (4)
MIN ORIFICE 0.625 84 (318) 100 (7) MIN ORIFICE 1.125 251 (950) 100 (7)
75 (284) 80 (6) 222 (840) 80 (6)
64 (242) 60 (4) 194 (734) 60 (4)
60 (227) 50 (3) 164 (621) 40 (3)
SFS 1030 RE-HEALING RF3, SFS 1660*
(C = .625) 3% gpm (lpm) psi (bar) (C = .650) gpm (1pm) psi (bar)
MAX ORIFICE 1.25 315 (1192) 100 (7) MAX ORIFICE 1.875 680 (2574) 100 (7)
285 (1079) 80 (6) 621 (2351) 80 (6)
245 (927) 60 (4) 525 (1987) 60 (4)
220 (833) 50 (3)
MIN ORIFICE 1.125 251 (950) 100 (7)
MIN ORIFICE 0.875 156 (590) 100 (7) 222 (840) 80 (6)
137 (519) 80 (6) 194 (734) 60 (4)
120 (454) 60 (4) 164 (621) 40 (3)
*non-UL Listed, non-FM Approved
95 (360) 40 (3)
FLOW RATES
UL LISTED
FLOW RANGE FLOW RANGE
SFS 825 MIN.ORIFICE 0.625 - SFS 1030 MIN. ORIFICE 0.875 -
(C = .615) CONCENTRATE MAX. ORIFICE 0.938 (C = .625) CONCENTRATE MAX. ORIFICE 1.25
RE-HEALING RF3, 3% 60 -181 pgm (227 -685 1pm) RE-HEALING RF3, 3% 95 -315 gpm (360 -1192 1pm)
ARCTIC 1 % AFFF 48 - 179 gpm (182 -678 1pm) ARCTIC 1 % AFFF 94 - 312 gpm (356 - 1181 lpm)
ARCTIC 3% AFFF 49 -180 gpm (185 -681 lpm) ARCTIC 3% AFFF 96 -316 gpm (363 - 1196 lpm)
ARCTIC lx3% ATC 51 -84 gpm (193 -318 lpm) ARCTIC lx3% ATC N/A
ARCTIC 3x3% ATC 46-180 gpm (174-681 lpm) ARCTIC 3x3% ATC 94 - 312 gpm (356 -1181 lpm)
FLOW RANGE
SFS 1240 MIN. ORIFICE 1.125 -
(C = .635) CONCENTRATE MAX. ORIFICE 1.875
RE-HEALING RF3, 3% 164 -680 pgm (621-2575 lpm)
ARCTIC 1 % AFFF 149 - 695 gpm (564-2631 lpm)
ARCTIC 3% AFFF 147 -720 gpm (556 -2725 1pm)
ARCTIC lx3% ATC N/A
ARCTIC 3x3% ATC 150 -695 gpm (568-2631 lpm)
FOAM CHAMBERS
ORIFICE PLATE SIZING
DIMENSIONAL INFORMATION
APPROXIMATE DIMENSIONS Inches (Millimeters)
MODEL A B C D E F G H J K
SFS 825 26.25 (667) 17.00 (432) 5.75 (146) 11.50 (292) 4.50 (114) 7.00 (178) 2.50 (64) 7.50 (191) .63 (16) 8.00 (203)
SFS 1030 32.13 (816) 19.00 (483) 6.50 (165) 13.00 (330) 6.63 (168) 9.00 (229) 300 (76) 9.50 (241) .75 (19) 9.50 (241)
SFS 1240 35.75 (908) 22.00 (559) 7.75 (197) 15.50 (394) 8.75 (222) 10.00 (254) 4.00 (102) 11.75 (298) .88 (22) 11.00 (279)
SFS 1660 4138 (1051) 23.63 (600) 9.50 (241) 19.00 (483) 10.81 (275) 12.00 (305) 6.00 (152) 14.25 (362) 1.OO (25) 12.00 (305)
FOAM CHAMBER
FOAM CHAMBERS
INSTALLATION INFORMATION
FOAM CHAMBER MOUNTING BOLTED WITH PAD, SPLIT DEFLECTOR
BOLTED WITH PAD, SPLIT DEFLECTOR BOLTED WITH PAD, BOLTED WITH PAD,
SPLIT DEFLECTOR SHALLOW DEFLECTOR
WELDED WITH WELDED WITH
SPLIT DEFLECTOR SHALLOW DEFLECTOR
Note: This installation information provides only general guidelines. Each
installation may require modifications to meet specific requirements or
application(s). Perimeter Solutions reserves the right to change any portion
of this information without notice.
FOAM CHAMBERS
ORDERING INFORMATION
FOAM CHAMBERS APPROXIMATE SHIPPING WEIGHT
PART NO. DESCRIPTION lb kg
32100 Foam Chamber, Model SFS-825, Red Enamel Finish 46 21
32101 Split Deflector Plate, Model SFS-825, Red Enamel Finish 5 2
32102 Solid Deflector Plate, Model SFS-825, Red Enamel Finish 5 2
32103 Foam Chamber, Model SFS-1030, Red Enamel Finish 84 38
32104 Split Deflector Plate, Model SFS-1030, Red Enamel Finish 6 3
32105 Solid Deflector Plate, Model SFS-1030, Red Enamel Finish 6 3
32106 Foam Chamber, Model SFS-1240, Red Enamel Finish 92 42
32107 Split Deflector Plate, Model SFS-1240, Red Enamel Finish 9 5
32108 Solid Deflector Plate, Model SFS-1240, Red Enamel Finish 9 5
32109 Foam Chamber, Model SFS-1660, Red Enamel Finish 163 74
32110 Split Deflector Plate, Model SFS-1660, Red Enamel Finish 12 5
32lll Solid Deflector Plate, Model SFS-1660, Red Enamel Finish 12 5
FOAM CHAMBER - REPLACEMENT PARTS APPROXIMATE SHIPPING WEIGHT
PART NO. DESCRIPTION lb kg
32120 Vapor Seal Assembly, Model SFS-825 0.50 0.2
32121 Vapor Seal Assembly, Model SFS-1030 0.50 0.2
32122 Vapor Seal Assembly, Model SFS-1240 0.50 0.2
32123 Vapor Seal Assembly, Model SFS-1660 0.50 0.2
32124 Cover Gasket, Model SFS-825 0.25 0.1
32125 Cover Gasket, Model SFS-1030 0.25 0.1
32126 Cover Gasket, Model SFS-1240 0.25 0.1
32127 Cover Gasket, Model SFS-1660 0.25 0.1
32128 Orifice Plate, Model SFS-825 1.00 0.4
32129 Orifice Plate, Model SFS-1030 1.00 0.4
32130 Orifice Plate, Model SFS-1240 1.00 0.4
31131 Orifice Plate, Model SFS-1660 1.00 0.4
FOR MORE INFORMATION UNITED STATES EMEA ASIA PACIFIC
10667 Jersey Blvd. Polígono de Baiña, Parcela 23 3 Charles Street
Contact any of our worldwide Rancho Cucamonga, CA 91730 33682 Mieres (Asturias) St Marys NSW 2760
Perimeter Solutions Fire Safety offices Tel: +1 800 682 3626 Spain SAustralia
or visit: Tel: +1 909 983 0772 Tel: +34 985 24 29 45 Tel: +61 2 9673 5300
www.Perimeter-Solutions.com
[email protected] [email protected] [email protected] perimeter-solutions.com
NOTICE PERIMETER SOLUTIONS MAKES NO REPRESENTATIONS OR WARRANTIES AS TO THE COMPLETENESS OR ACCURACY OF THE INFORMATION INCLUDED HEREIN. THE INFORMATION CONTAINED HEREIN IS
NOT INTENDED TO PROVIDE REGULATORY, LEGAL OR EXPERT ADVICE RELATING TO THE PRODUCTS, ITS APPLICATION OR USES. NOTHING CONTAINED HEREIN IS TO BE CONSTRUED AS A RECOMMENDATION TO
USE ANY PRODUCT, PROCESS, EQUIPMENT OR FORMULATION IN CONFLICT WITH ANY INDUSTRIAL PROPERTY OR INTELLECTUAL PROPERTY RIGHTS, AND PERIMETER SOLUTIONS MAKES NO REPRESENTATION OR
WARRANTY, EXPRESS OR IMPLIED, THAT THE USE THEREOF WILL NOT INFRINGE ON ANY INDUSTRIAL PROPERTY OR INTELLECTUAL PROPERTY RIGHTS. NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESSED
OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO THE INFORMATION CONTAINED HEREIN.
© 2023 PERIMETER SOLUTIONS LP. ALL RIGHTS RESERVED. F-2011010-6
