MXE 3G 1kVA 1x1 (Inbuilt Battery) UPS Technical Specification
MXE 3G 1 kVA
01 kVA 1x1 (Inbuilt Battery) UPS
Manufacturer’s declaration in accordance with IEC 62040-3
Value Proposition:
High Performance
True Online Double Conversion
True Input PF 0.99
True output PF 0.9
Output THDv 2%
Higher Power Density
Higher Efficiency upto 98% in ECO Mode
Support Critical Virtualization
High Reliability and Adaptability
Wide Input Voltage Range 110 to 300 Vac
Inbuilt Hardware Current Limit Technology.
Upgraded Phase Lock Algorithm
Inbuilt Over-voltage Cut-off Device
Inbuilt Over Temperature Protection.
Upto 50 Degree Celsius operation @50%
Load (Specific to XL Model)
Better Overload Protection upto 105% Constant
High Flexibility and Availability
Adjustable Charging Current 0 to 1.5 Amps
Better Short Ckt Handling Capacity.
Auto Fault Recovery.
Conformal Coated Boards.
More Accessories.
Major Application
Networking/Server/Storage.
Wiring Closets.
Security and Surveillance System.
Industrial Automation Control.
Laboratory Equipment.
ATM/Telecom/Railway Signalling.
MXE 3G 1kVA
Technical Specification 1 kVA-Inbuilt Battery
Model Name MXE 3G 1000i
Catalog number MXE 3G 1K
Plant Part Number 9103-53862FC1
S7 Code 11158
INPUT Characteristics
Acceptable Input Voltage 100VAC-300VAC
Phase Single phase with ground
Transfer Voltage Range (low load) 100VAC-300VAC (40% load)
Transfer Voltage Range (100% load) 176VAC-300VAC
-Line low loss 176VAC/100VAC (±3%)
-Line low comeback 186VAC/110VAC (±3%)
-Line high loss 300VAC (±3%)
-Line high comeback 290VAC (±3%)
Nominal input current (r.m.s)
4.5A
@ 230V input and battery fully recharged
Inrush Current Limit 8*Irms
THDi 5 % typical, 7% Max with R full load @ 230v input
Input Power Factor ≥0.99(R FULL LOAD) @ 230V input
Input Frequency Range 45-55Hz / 54-66Hz
Input protection Breaker
OVCD Withstand 440Vac, 24Hours
Generator Set 2.2 x UPS Rating Power
OUTPUT Characteristics
Output Power(VA) max 1000
Output Power(W) max 900
Output Power Factor 0.9
Output Waveform Pure sine wave
Output nominal voltage 220VAC/230VAC/240VAC
Output Voltage Variation ±1%
Output Transient recovery 100ms (IEC 62040-3 Non-linear load)
< 2% THD, linear load@Line mode
< 2% THD, linear load @ battery mode, battery voltage 12V / per battery
Output Voltage distortion
< 6% THD, linear load@Line mode
< 6% THD, linear load @ battery mode, battery voltage 12V / per battery
Output Frequnecy in inverter mode Synchronization range 45-55Hz / 54-66Hz
Output Frequency Slew rate 1 Hz/s
Output Frequency in Battery mode (50/60±0.05) Hz
Transfer time Inverter Mode to Battery Mode. 0ms
Transfer Time Inverter Mode to Bypass Mode. 4ms
Line mode efficiency @ full load with battery fully charged >89%
ECO mode efficiency @ full load with battery fully charged >97.5%
Battery mode efficiency @ full load 12Vdc/Battery >84.4%
100%～105% :Constant
105%~130% :60s
Overload Capability (Line mode)
130%~150% :10s
>150% :300ms
100%～105% :Constant
105%~130% :10s
Overload Capability (Battery mode) 130%~150% :1s
>150% :300ms
>105% and Vbat<10.5V: 300ms
2
MXE 3G 1kVA
BATTERY Characteristics
DC Voltage 24VDC
21VDC,
Battery-Low Voltage(full load)
10.5V/pcs
Battery shutdown voltage @ 0 ～ 20% Load (for long run model) / 0~ 30% (for
21.4VDC,10.7V/pcs
standard model)
Battery shutdown voltage @ 20 ～ 70% Load (for long run model) / 30%~70% load (for
20.4VDC, 10.2V/pcs
standard model)
Battery shutdown voltage @ > 70% Load 19VDC, 9,5V/pcs
Charger Current 1.5A
Leakage current < 150uA
FEATURES
ECO Mode YES
EPO Function YES
Battery Capacity Calculation YES
Fan Speed Control YES
Frequency Converter Mode(CVCF) YES, 60% load
INTERFACE
RS232 NA
USB YES
COM Slot YES
NMC card Optional
AS400 card(Dry contact card) Optional
Modbus card Optional
Input connection IRAM Inet 10A
Outlet socket 3 x IRAM 10A outlets
MECHANICAL
WxHxD (mm) 144 x 228 x 356
Net Weight 9.2Kg
Operating Temperature Range 0°C ~ 40 °C
Relative Humidity 0 ~ 95% (No condensing)
Audible Noise <40dB at front 1m @ typical load
Regulations and Standards
-ESD IEC 61000-4-2 Level 3
-RS IEC 61000-4-3 Level 3
-EFT IEC 61000-4-4 Level 4
-Surge IEC 61000-4-5 Level 4
-Safety BIS
-Transportation ISTA 2A
-Protection IP20 (static)
ACCESSORIES
User manual Yes
External battery power cord NA
3
MXE 3G 1kVA
EMC
Conduction Class 2 Ref Std: IEC 62040-2:2005
Radiation Class 2 Ref Std IEC 62040-2:2005
Low frequency conducted disturbances Criteria A Ref Std : IEC61000-2-2:2002
Harmonic current Class A Ref Std :IEC 61000-3-2:2014
ESD Criteria B, Level 3 Ref Std : IEC 61000-4-2:2008
RS Criteria A, Level 3 Ref Std IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
EFT Criteria B ,Level 4 Ref Std :IEC 61000-4-4:2012
Criteria B,
Surge DM Level 3: 2KV,
CM Level 4: 4KV Ref Std : IEC 61000-4-5:2014
C/S Criteria A, level 3 Ref Std : IEC61000-4-6:2013
M/S Criteria B, level 4 Ref Std : IEC61000-4-8:2009
Voltage Dips, short interruptions and voltage variations Criteria B ,Level 4 Ref Std : IEC61000-4-11: 2004
Certificate
BIS YES
CE YES
