Model: AS8900 Engine code:DBL5736

185 kW@1500 rpm | 205 kW@1800 rpm

Engine Speed Type of Engine Power Generator Power Mechanism

r/min Operation kW kVA
Type Over head valve
1500 Prime Power 185 200
Number of valve Intake 2, exhaust 2 per cylinder
1500 Standby Power 204 220 Valve lashes at cold Intake 0.25mm
1800 Prime Power 205 227.5 Exhaust 0.50mm

1800 Standby Power 226 250

· The engine performance is as per GB/T2820 Valve Timing

· Ratings are based on GB/T1147.1. Opening Close
Intake valve 20.9°BTDC 44.9°ABDC
· Prime Power:
-There is no time limit in the case of variable load operation. Exhaust valve 51.7°BBDC 11.7°ATDC
In any 250hours of continuous operation period,
the variable load of average work load less than
70%of the prime power.
The operation time in the situation of 100%prime power Fuel Consumption
no more than 500 hours. Permit 10%overload running
1hours in any 12 hours of continuous operation period. Power L/h（1500r/min） L/h（1800r/min）
The overload 10% power running time of every year no 15.7
25% 13.4
more than 25 hours.
50% 22.8 26.2
· Standby Power: 75% 32.8 37.4
-The annual total standby power load should be less than80%
and the average running time shall be less than 200 hours. 100% 44.1 50.9
Among them the standby power point should be no more 110% 49.6 57.2
than 25 hours a year.

Specifications
Fuel System
Engine Model AS8900
Injection pump Longkou in-line “P” type
In-line,4 strokes,
Governor RSV
4 valves,
Feed pump Mechanical type
Engine Type water-cooled ,
Injection nozzle Multi hole type
Turbo charged
Opening pressure 250 kg/cm2
with aftercooler
Fuel filter Full flow, car tridge type
Combustion type Direct injection
Used fuel Diesel fuel oil
Cylinder Type Wet liner

Number of cylinders 6

Bore × stroke 114× 144mm Lubrication System

Displacement 8.82 L Lub. Method Fully forced pressure feed type

Compression ratio 18: 1 Oil pump Gear type driven by crankshaft

Firing order 1-5-3-6-2-4 Oil filter Full flow, car tridge type

Injection timing 7.5°BTDC Oil pan capacity High level 19 liters

Dry weight Approx. 740kg Low level 15 liters

Dimension (L×W×H) 1422 ×762×1186 mm Angularity limit Front down 25 deg

Rotation SAE NO.2 Front up 35 deg

Fly wheel housing SAE NO.11.5 Side to side 35 deg

(tooth number of gear:125) Lub. Oil Refer to Operation Manual

www.aggpower.co.uk
 Cooling System Engineering Data

Cooling method Fresh water forced circulation Heat rejection to coolant 18.6kcal/sec（1500r/min）
Water capacity 12 liters 20.6kcal/sec（1800r/min）
(engine only) Heat rejection to intercooler 11.6 m3/min （1500r/min）
Lid Min. pressure 70kPa 12.9 m3/min （1800r/min）
Water pump Centrifugal type driven by belt Exhaust gas temp 600 °C
Water pump Capacity 200L/min （1500r/min） Max. permissible restrictions 3 kPa initial
Operation conditions
Features 240L/min （1800r/min） Features
Intake system 6 kPa final (need
Thermostat Wax–pellet type charge filter element)
Opening temp. 82°C Exhaust system 6 kPa max
Full open temp. 95°C Max. permissible altitude 2000 m
Cooling fan Blower type, plastic
762 mm diameter, 10blades
Dimension
Options
Power consumption 5kw
Cooling air flow 6.2m³/s

Electrical System

Charging generator 24V×55A

Voltage regulator Built-in type IC regulator
Star ting motor 24V×4.5kW
Star ting motor 24V
Battery Capacity 120 AH

Features

Publication No. GYH0618N, ISSUE 1 @ AGG UK

AGG UK | AGG China | AGG USA | AGG UAE Distributed by

[email protected] | www.aggpower.co.uk

Follow us @facebook.com/aggpowergroup

Follow us @linkedin.com/company/agg-power

Follow us @ AGGPOWER

All information in the document is substantially correct a the time of printing

but may be subsequently altered by the company.