Audi Service Training 6 Gear Automatic Speed 09g
Full download: http://manualplace.com/download/audi-service-training-6-gear-automatic-speed-09g/
291
Vorsprung durch Technik www.audi.co.uk Service Training
6-speed Automatic Gearbox 09G
Self-Study Programme 291
All rights reserved.
Technical specifications
subject to change without
notice.
Copyright
AUDI AG
I/VK-35
[email protected]
Fax +49-841/89-36367
AUDI AG
D-85045 Ingolstadt
Technical status: 03/04
Printed in Germany
A03.5S00.02.20
This is the cut pages sample. Download all 26 page(s) at: ManualPlace.com
Audi Service Training 6 Gear Automatic Speed 09g
Full download: http://manualplace.com/download/audi-service-training-6-gear-automatic-speed-09g/
Dynamics and economy Brief technical description
The 6-speed automatic gearbox 09G sets new 6-speed automatic gearbox using
standards in the segment of transversely mounted the Lepelletier planetary gear set concept.
multi-step automatic gearboxes
The wide ratio spread* of 6.05 provides flexibility in
use (sport or economy mode).
• Low weight
Only five gear shifting components are required.
• Wide ratio spread*
Highly compact, lightweight and powerful.
• Compact gearbox dimensions
There are three gearshift modes to choose from:
sport program and manual gear selection by
• High shifting speed tiptronic.
• High level of shift comfort In triponic mode, it is possible to start in second
gear.
* you will find an explanation of the terms/
paragraphs marked with an asterisk as of page 72
This Self-Study program gives general descriptions of the 09G gearbox and shows the special features in
combination with the Audi A3 ‘04 and Audi TT.
291_117
The basics for this Self-Study Programme are covered in the multimedia training course "Power
Transmission 2" and in the previously published self-study programmes on multi-step automatic gearboxes. Reference Note
The Self-Study Programme is not a Repair Manual!
The values given are intended as a guideline only and refer
to the software version valid at the time of publication of the SSP.
For maintenance and repair work, always refer to the current technical literature.
This is the cut pages sample. Download all 26 page(s) at: ManualPlace.com
