0% found this document useful (0 votes)
412 views7 pages

Eng 24Cxx, 93Cxx and 25xxx Eeprom Programmer

The document describes a 24Cxx, 93Cxx and 25xxx EEPROM programmer. It supports various EEPROM and microcontroller chips that can be programmed through serial ports or ICSP ports. The programmer is small, portable and runs on Windows and Linux operating systems.

Uploaded by

ctecisb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
412 views7 pages

Eng 24Cxx, 93Cxx and 25xxx Eeprom Programmer

The document describes a 24Cxx, 93Cxx and 25xxx EEPROM programmer. It supports various EEPROM and microcontroller chips that can be programmed through serial ports or ICSP ports. The programmer is small, portable and runs on Windows and Linux operating systems.

Uploaded by

ctecisb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

24Cxx, 93Cxx and 25xxx Eeprom Programmer

Technical characteristics of the programmer:

* Support 24C01, 24C02, 24C04, 24C08, 24C16 I2C Bus EEPROM


* Support 24C32, 24C64, 24C65, 24C128, 24C256, 24C512 I2C Bus EEPROM
* Auto detect 24XX EEPROM capacity
* Support 24C325 and 24C645 I?C Bus EEPROM
* Detect the bank roll over capability of some old 24XX EEPROM
* Support 93C06, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86 Microwire EEPROM (C and LC series, the CS
serie is not supported yet)
* Support 93C13 (as a 93C06) and 93C14 (as a 93C46) Microwire EEPROM
* Access microwire eeproms in either 8 and 16 bit organization
* Support 25010, 25020, 25040 SPI EEPROM
* Support 25080, 25160, 25320, 25640, 25128, 25256 Big SPI EEPROM
* Support 25642 and 95640 Big SPI EEPROM
* Read/Write Intel hex format file as well as raw binary file
* Read/Write Motorola S-record format file
* Features a custom E?P format file to store the EEPROM characteristics, an editable comment and memory
content all together with CRC
* Enhanced buffer edit, text and hexadecimal
* Work with Windows95, Windows98, WindowsME, Windows2000, WindowsNT and Linux*
* Fill buffer command
* Serial number programming
* Script files for batch programming
* Improved speed with WinNT and Win2000 with a driver for direct I/O.

Size: cm 4,0 x cm 5,0


Connects do the serial port of your PC

Supply:
The programmer no need external supply 9-12V.when program eeprom chip.

Software:
PonyProg compatible
Software settings:
program 24CXX: setting:

Sorry,if you buy before date 2007/8/8 have a bug: 24CXX chip 5pin(data),6pin(clock) locality should put in
10K resistor to 8pin(vcc) . sch:
program 93CXX: ( 24cxx set "off") setting:

program 25XXX: ( 24cxx set "off")


Use ICSP port support: ( 24cxx set "off")
support: Siemens SDE2516, SDE2526, SDA2546, SDA2586, SDA3546, SDA3586 EEPROM (as 24XX Auto)
support: AT17C65, AT17C128, AT17C256, AT17C512, AT17C010 I2C Bus EEPROM
support: Siemens SDE2506 EEPROM
support: AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4414, AT90S4434, AT90S8515, AT90S8535
Flash micro
support: AT90S2323, AT90S2343, AT90S2333, AT90S4433, AT90S4434, AT90S8535, AT90S8534
support: ATmega103, ATmega161, ATmega163, ATmega 323, ATmega128, ATmega8
support: the AVR microcontroller ATmega16, ATmega64 ( untested )
support: the AVR microcontroller ATmega32, ATmega162, ATmega 169, ATmega8515, ATmega8535 (
untested )
support: the AVR ATtiny microcontroller ATtiny12, ATtiny15
support: the AT89S8252 and AT89S53 micro
support: PIC 16F873/874/876/877 and PIC 16F84A micro
support: PIC 16F873A/874A/876A/877A and PIC 16F627/628 micro (untested)
support: PIC 12C508/509 micro
support: PIC 12C671/672 micro ( untested )
support: NVM3060 eeprom
support: MDA2061/MDA2062 eeprom
support: X2444/X2445 eeprom
you can download software from website 1 or website 2:
download from website 1 : download from website 2 :
download sch(pdf)
download ponyprog software

more help file can view: open "PonyProg2000"software->"?"-->"Help"

EMAIL: picworld*126.com ("*"need change to "@")

You might also like