Validate Print Help Percentage B

Tender Inviting Authority: Superinteding Engineer, Institute Works Department, IIT(BHU), Varanasi

Name of Work: Construction of girl toilet/bathroom for G+2 in Department of Mining Engineering, IIT(BHU)

Contract No: IIT(BHU)/IWD/

Name of the
Bidder/ Bidding
Firm / Company :
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder
NUMBER # TEXT # Name and Values
NUMBER # only ) TEXT #

Sl. Item Description Quantity Units

No.

1 2 4 5
1 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster
including disposal of rubbish to the dumping ground within 50 metres lead.(15.56)
93.00

sqm
2 Demolishing cement concrete manually/ by mechanical means including disposal of material
within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer 6.00
mix (i/c equivalent design mix) (15.2.1)
cum
3 Demolishing brick work manually / by mechanical means including stacking of serviceable
material and disposal of unserviceable material within 50 metres lead as per direction of 7.00
Engineer-in-charge: In cement mortar (15.7.4) cum
 4 Demolishing lime concrete manually / by mechanical means and disposal of material within 50
9.00
metres lead as per direction of Engineer in charge. (15.1) cum
5 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in
32.00
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including Cum
6.1 dressing
Providingofand
sideslaying
and ramming of bottoms,
in position lift upto 1.5
cement concrete m, including
of specified getting
grade out thethe
excluding excavated
cost of
soil and disposal of surplus excavated soil as directed,
centering and shuttering - All work upto plinth level within a lead of 50m All kinds of soil.
(2.8.1)
(a) 1:4:8 (1 Cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) (4.1.8) 13.00
cum
6.2 (b) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (4.1.3) 4.00
cum
7 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in
foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand)(6.1.2) 10.00
cum
8 Providing and laying in position specified grade of reinforced cement concrete excluding the
cost of centering, shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1
cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) (5.1.2) 9.00

cum
9 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°
landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair
cases above plinth level up to floor five level, excluding the cost of centering, shuttering, 14.00
finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone
aggregate 20 mm nominal size). (5.3)
cum
10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade 1986.00
Fe-500D or more. (5.22.6) kg
11.1 Centering and shuttering including strutting, propping etc. and removal of form for:
(a) Lintels, beams, plinth beams, girders, bressumers and cantilevers. (5.9.5) 129.00
sqm
11.2 (b) Suspended floors, roofs, landings, balconies and access platform (5.9.3)
37.00
sqm
12 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 75 in
superstructure above plinth level upto floor V level in all shapes and sizes in:Cement mortar 1:6 33.00
( 1 cement : 6 coarse sand) (6.4.2)
cum
13 Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick
nominal size including spreading, well ramming, consolidating and grouting with jamuna sand,
including finishing smooth etc. complete as per direction of Engineer-in-charge. (16.64) 47.00

sqm
14 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 75
in superstructure above plinth level up to floor V level : Cement mortar 1:4 (1 Cement : 4
62.00
coarse sand) (6.13.2)
sqm
15 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed
portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @
4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended
proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of
20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in
recommended proportion including rounding off junction of vertical and horizontal surface. (iii)
IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) 30.00
IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm
wide and pasted to each other with bitumen @ 1.7 kg/sqm).(22.3)

sqm
16 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (13.4.2)
546.00
sqm
17 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse
sand) (13.5.2) 238.00
sqm
18 Providing and fixing soil, waste and vent pipes : 100 mm dia. Centrifugally cast (spun) iron
socket & spigot (S &S) pipe as per IS :3989 (17.35.1.2) 30.00
metre
19 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of
diameter: 100 mm (17.58.1) 24.00
Nos.
20 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm
thick, bolts and nuts complete. 100 mm Sand cast iron S&S as per IS:- 3989 (17.38.1.2)
9.00
Nos.
21 Providing and fixing plain bend of required degree. 100 mm Sand cast iron S&S as per IS: -
3989 (17.39.1.2) 9.00
Nos.
22 Providing and fixing single equal plain junction of required degree. 100x100x100mm Sand cast
iron S&S as per IS: - 3989 (17.44.1.2)
9.00
Nos.
23 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or
without vent arm complete, including cost of cutting and making good the walls and floors :100
9.00
mm inlet and 100 mm outlet Sand cast iron S&S as per IS: - 3989 (17.60.1.1)
Nos.
24 Providing and fixing 100mm sand cast Iron grating for gully trap.(17.29) 9.00 Nos.
25 Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast
Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device
(handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting
and making good the walls and floors wherever required.:White Vitreous china Orissa pattern 3.00
W.C. pan.of size 580x440mm with integral type foot rests. (17.1.1)

Nos.
26 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan)
with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including
cutting and making good the walls and floors wherever required : W.C. pan with ISI marked 3.00
white solid plastic seat and lid (17.2.1)
Nos.
27 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P.
brass waste of standard pattern, including painting of fittings and brackets, cutting and making
good the walls wherever require : White Vitreous China Wash basin size 630x450 mm 6.00
with a single 15 mm C.P. brass pillar tap (17.7.2) Nos.
28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings
complete.Semi rigid pipe 32 mm dia (17.28.1.1) 12.00
Nos.
29 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality)
complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and
6.00
washers complete. (17.31)
Nos.
30 Making connection of drain or sewer line with existing manhole including breaking into and
making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar
1:3 (1cement : 3 coarse sand ) finished with a floating coat of neat cement and making necessary 6.00
channels for the drain etc. complete. For pipes 100 to 250 mm diameter (19.21.1)

Nos
31.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting
and making good the walls etc.
Internal work - exposed on wall 42.00
(a) 15mm dia. nominal bore (18.10.1)
Mtr.
31.2 (b) 25mm dia. nominal bore (18.10.3) 15.00
Mtr.
32 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
a) 15 mm nominal bore (18.49.1) 18.00
Nos.
33.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved
make conforming to IS:8931
a) 15 mm nominal bore (18.52.1) 5.00

Nos.
34 Making connection of G.I. distribution branch with G.I. main of following sizes by providing
and fixing tee, including cutting and threading the pipe etc. complete
3.00
b) 25 to 40 mm nominal bore (18.13.1)
Nos.
35 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready
mixed priming coat, both of approved quality for new work. 25 mm diameter pipe. (18.38.3)
15.00
metre
36 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping,
sand papering and preparing the surface smooth including necessary repairs to scratches etc.
125.00
complete.(13.91)
Sqm
37 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to
be specified by the manufacturer), of approved make, in all colours, shades except burgundy,
bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps
and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing 135.00
with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with
pigment of matching shade complete. (8.31)
sqm
38 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified
by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such
as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4
Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with 44.00
white cement and matching pigment etc., complete. (11.37)
sqm
39 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the
manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved
brand & manufacturer, in all colours and shade, laid with cement based high polymer modified
quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, 52.00
including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile
600x600 mm (11.49.2)
sqm
40 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the
manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved
brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based
high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in 12.00
average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made
separately).Size of Tile 600x600 mm (11.47.2)
sqm
41 Providing and applying white cement based putty of average thickness 1mm, of approved brand
and manufacturer, over the plastered wall surface to prepare the surface even and smooth
619.00
complete. (13.80)
sqm
42 Distempering with oil bound washable distemper of approved brand and manufacture to give an
even shade New work (two or more coats) over and including water thinnable priming coat with
619.00
cement primer (13.41.1)
sqm
43 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more
coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @
238.00
2.20 kg/10 sqm) (13.46.1)
sqm
44 Excavating trenches of required width for pipes, cables, etc including excavation for sockets,
and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the
excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth
including consolidating each deposited layer by ramming, watering, etc. and disposing of
surplus excavated soil as directed , within a lead of 50m All kinds of soil Pipes, cables etc. 46.00
exceeding 80mm dia. but not exceeding 300 mm dia.
(2.10.1.2)
metre
45 Providing, laying and jointing glazed stoneware Class SP-1 with stiff mixture of cement mortar
in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete 150 mm
46.00
diameter (19.1.2)
metre
46 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) all round S.W. pipes including bed concrete as per standard
46.00
design: 150 mm diameter S.W. pipe (19.2.2)
metre
47 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per
5.00
standard design :150 mm diameter S.W. pipe (19.3.2)
Mtr
48 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with
75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with
frame (light duty) 455 x 610mm internal dimensions, total weight of cover with frame to be not
less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4
mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation
concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside
plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with 16.00
a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
Inside dimensions 455x610 mm and 45 cm deep for single pipe line- With F.P.S. bricks
(19.30.1.1)

Nos
49 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with
R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with floating coat of neat cement and making channels in
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) 1.00
finished with a floating coat of neat cement complete as per standard design : With common
burnt clay F.P.S. (non modular) bricks of class designation 7.5 (19.7.3.1)

Nos
50 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1
cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm
bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary
excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40
mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 9.00
mm thick, finished with a floating coat of neat cement complete as per standard design : With
common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (18.33.1)

Nos
51 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1
cement : 4 coarse sand) for water meter complete with C.I. double flap surface box
400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation,
foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, 5.00
finished with a floating coat of neat cement complete as per standard design : With common
burnt clay F.P.S.(non modular) bricks of class designation 7.5 (18.37.1)

Nos
52 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm
with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe,
spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap
with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting 3.00
and making good the walls and floors wherever required :Single half stall urinal with 5 litre
P.V.C. automatic flushing cistern (17.5.1)
Nos
53 Providing and fixing ISI marked flush door shutters conforming to IS 2202 (part1) decorative
type, core of block board construction with frame of 1st class hard wood and well matched teak
3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30
16.00
mm thick including ISI marked Stainless Steel butt hinges with necessary screws (9.20.2)

sqm
54 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less
than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts
9.00
and screws etc. complete :250x16 mm (9.96.2)
Nos
55.1 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed
to required colour or shade, with necessary screws etc. complete : 9.00
(a) 250x10 mm (9.97.2)
Nos
55.2 (b) 150x10 mm (9.97.4)
9.00
Nos
56 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than
grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary
18.00
screws etc. complete :125 mm (9.100.1)
Nos
57 Providing and fixing aluminium work for doors, windows, ventilators and partitions with
extruded built up standard tubular sections/ appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS : 1285, fixing with dash fastners of required dia &
size, including necessary filling up the gaps at junctions, i.e. top, bottom and sides with required
EPDM rubber /neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,
mitred and jointed mechanically wherever required including cleat angle, Aluminium snap
beading for glazing / panelling,C.P. brass / stainless steel screws, all complete as per 93.00
architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be
paid for separately.) For fixed portion Anodised aluminium (anodised transparent or dyed to
required shade according to IS: 1868, Minimum anodic coating of grade AC 15). (21.1.1.1)

kg
58 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by
mechanical means, including loading, transporting, unloading to approved municipal dumping
ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including 19.00
all lifts involved. (15.60)
cum
59 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer using structural steel etc. as
required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 284.00
(10.25.2)
kg
60 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
40 mm nominal bore (18.17.3)
2.00
Nos
61 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic
floats complete : 25 mm nominal bore(18.18.3)
2.00
Nos
62 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and
making long screws etc. complete (New work) : 40 mm nominal bore(18.46.5)
6.00
Nos
63 Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external
work :40 mm diameter pipe (18.41.5)
15.00
Mtrs.
64 Providing & Applying polymer modified, flexible cementatious negative side waterproofing
coating with elastic waterproofing polymers on interior wall plaster surface in three coats
@14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution
with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution 63.00
with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-
existing paint film & loose particles till plaster is visible, complete in all respect as per the
direction of Engineer-in-Charge. (22.23A) Sqm
65 Demolishing mud phaska in terrracing and disposal of material within 50 metres lead (15.27)
48.00
cum
66 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the
25.00
serviceable materialwithin 50 metres lead. (15.38) Sqm
 67 Providing and laying integral cement based water proofing treatment including preparation of surface as
required for treatment of roofs, balconies, terraces etc consisting of following operations. (a)
Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing
compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including
adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick
bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 ( 1
cement: 5 coarse sand)admixed with water proofing compound conforming to IS:2645 and approved by
Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand)
admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge to
required slope and treating similarly the adjoining walls upto 300mm height including rounding of
25.00
junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry
using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and
approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of
mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of
plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of
300x300mm square 3mm deep. (e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All above operations to be done in order and
as directed and specified by the Engineer-in-Charge:
With average thickness of 120mm and minimum thickness at khurra as 65 mm. (22.7.1) Sqm
Total in Figures

Quoted Rate in Figures Select

Quoted Rate in Words
 Percentage BoQ

umns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder
NUMBER NUMBER # TEXT #

Estimated Rate TOTAL AMOUNT TOTAL AMOUNT

in With Taxes In Words
Rs. P in
Rs. P

6 7 8
#VALUE! #VALUE!

39.00

#VALUE! #VALUE!
1737.45

#VALUE! #VALUE!
1469.90
 #VALUE! #VALUE!
607.50

#VALUE! #VALUE!
252.30

#VALUE! #VALUE!

5789.60

#VALUE! #VALUE!
6788.60

#VALUE! #VALUE!
6157.45

#VALUE! #VALUE!

7718.25

#VALUE! #VALUE!

9763.80

#VALUE! #VALUE!
83.50

#VALUE! #VALUE!
552.05
 #VALUE! #VALUE!
693.05

#VALUE! #VALUE!
7590.45

#VALUE! #VALUE!

176.70

#VALUE! #VALUE!
932.10

#VALUE! #VALUE!

705.70

#VALUE! #VALUE!
263.55
 #VALUE! #VALUE!
303.90

#VALUE! #VALUE!
1092.20

#VALUE! #VALUE!
481.45

#VALUE! #VALUE!
461.65

#VALUE! #VALUE!
390.75

#VALUE! #VALUE!
667.70

#VALUE! #VALUE!
1512.55

44.60 #VALUE! #VALUE!

#VALUE! #VALUE!

5421.50
 #VALUE! #VALUE!

5260.95

#VALUE! #VALUE!

2751.30

#VALUE! #VALUE!
87.70

#VALUE! #VALUE!
1283.05

#VALUE! #VALUE!

623.50

#VALUE! #VALUE!

284.90

#VALUE! #VALUE!
438.00

#VALUE! #VALUE!
418.95
 #VALUE! #VALUE!

606.25

#VALUE! #VALUE!
673.45

#VALUE! #VALUE!
23.70

#VALUE! #VALUE!
18.25

#VALUE! #VALUE!

1030.30

#VALUE! #VALUE!

926.90
 #VALUE! #VALUE!

1609.95

#VALUE! #VALUE!

1734.00

#VALUE! #VALUE!
115.15

#VALUE! #VALUE!
153.45

#VALUE! #VALUE!
164.70
 #VALUE! #VALUE!

364.20

#VALUE! #VALUE!
500.20

#VALUE! #VALUE!
999.15

#VALUE! #VALUE!
479.85

#VALUE! #VALUE!

6061.95
 #VALUE! #VALUE!

22983.25

#VALUE! #VALUE!

6849.60

#VALUE! #VALUE!

6088.60
 #VALUE! #VALUE!

9360.60

#VALUE! #VALUE!

2756.35

#VALUE! #VALUE!
231.70

#VALUE! #VALUE!

103.55

#VALUE! #VALUE!
75.00

#VALUE! #VALUE!
59.65
 #VALUE! #VALUE!

423.95

#VALUE! #VALUE!

138.85

#VALUE! #VALUE!

131.00

#VALUE! #VALUE!
678.40

#VALUE! #VALUE!
394.00
 #VALUE! #VALUE!
452.50

#VALUE! #VALUE!
154.15

#VALUE! #VALUE!

444.80

#VALUE! #VALUE!
652.30

#VALUE! #VALUE!
55.00
 #VALUE! #VALUE!

1398.50

#VALUE! #VALUE!

0.00 #VALUE!
#VALUE!
Please Enable Macros to View BoQ information
Q information