Scribd
Upload
44 views1 page

SBV4110392 OK 309L 3.2mm

This document provides inspection certificates for a chemical analysis and mechanical properties test of welding wire. It includes the chemical composition analysis results showing the wire met specifications. It also lists typical tensile and impact test data for the wire's mechanical properties as required by the standard. The wire was produced under a quality assurance program meeting ISO 9001 requirements.

Uploaded by

Eko Prastyo96
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views1 page

SBV4110392 OK 309L 3.2mm

This document provides inspection certificates for a chemical analysis and mechanical properties test of welding wire. It includes the chemical composition analysis results showing the wire met specifications. It also lists typical tensile and impact test data for the wire's mechanical properties as required by the standard. The wire was produced under a quality assurance program meeting ISO 9001 requirements.

Uploaded by

Eko Prastyo96
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION CERTIFICATE (3.

1) - Chemical analysis
TEST REPORT (2.2) - Mechanical properties

Date: 2022-05-20 Certificate number: EC26809689 rev. 0

Our order: Your order:


Our reference: Your reference:
Customer number: NA Your fax number:
Customer order date: Your e-mail:

Invoice address Receiver of certificate Delivery address


NA

DELIVERY Lot number: SBV4110392 Quantity:

PRODUCT CHEMICAL COMPOSITION


Brand: ESAB
Description: OK 309L 3.2x350mm Actual results: acc to EN 10204 - 3.1
Item number: 6498323020
All weld metal
CLASSIFICATIONS
Auxiliary:
EN ISO 3581-A: E 23 12 L R 3 2
SFA/AWS A5.4: E309L-16 C 0.02%
Si 0.75%
Mn 0.8%
P 0.023%
S 0.010%
Cr 23.4%
Ni 12.3%
Mo 0.06%
Cu 0.05%
MECHANICAL PROPERTIES
Typical data: acc to EN 10204 - 2.2

Standard:
Auxiliary:
Condition:

TENSILE
Rp0.2 Rm A5
470 MPa 580 MPa 32 %

IMPACT
Temp +20 °C
KV 50 J

COMMENTS

Product supplied under a QA Programme fulfilling the EN ISO 9001 standard.


This certificate is produced electronically and is valid without signature.
Please refer any queries to:
PT. VICTOR TEKNOLOGI INDONESIA; Kawasan Industri Kota Bukit Indah Blok AII No. 4; Purwakarta 41181; Jawa Barat
- Indonesia.

Validation - Chemical Analysis Validation - Others


Ellen Björgan Quality Manager Tapio Huhtala Product Manager

You might also like