Scribd
Upload
85 views4 pages

NETZSCH MultiProtector en

The MultiProtector is a monitoring and protection unit developed for NETZSCH positive displacement pumps. It analyzes data like temperature, pressure, leakage and voltage to detect potential issues. It has two threshold values - one for alarms and one for warnings, which can trigger pump shutdown. Users can monitor data in real-time and generate reports using a mobile app to avoid downtime and optimize pump performance.

Uploaded by

John Kim Carandang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views4 pages

NETZSCH MultiProtector en

The MultiProtector is a monitoring and protection unit developed for NETZSCH positive displacement pumps. It analyzes data like temperature, pressure, leakage and voltage to detect potential issues. It has two threshold values - one for alarms and one for warnings, which can trigger pump shutdown. Users can monitor data in real-time and generate reports using a mobile app to avoid downtime and optimize pump performance.

Uploaded by

John Kim Carandang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

M U LT I

PROTECTOR

MultiProtector: The Monitoring and Protection Unit


An app displays the critical data of your pump, warns, and protects it from damage

Pumps & Systems


MultiProtector
Pump protection device for NETZSCH pumps

The MultiProtector is a monitoring and protection unit developed for NETZSCH positive displacement
pumps. With this device, you can detect possible pump difficulties at an early stage. Based on, preset
threshold values, you can protect the pump from damage in advance.

The MultiProtector analyzes the What can be monitored? With the “MultiProtector” app,

∙
data on overpressure, temper- handling is very easy
ature, leakage (conductivity Temperature of the motor,

∙
measurement) and voltage. In the stator, and pumped medium The MultiProtector pump
“MultiProtector“ app, you can Pressure at the discharge port of protection unit can be connected
define two threshold values. One the pump, signal input 0-20 mA to mobile devices such as smart-

∙
threshold value causes an alarm, (4-24 mA) phones, tablets or laptops. With
the second one triggers a warning, 2 ways to measure leakage the app, you can set the threshold

∙∙
which can also be used to switch (conductivity measurement) values on the device, display the
off the pump. In addition, the error Motor frequency pump‘s sensor data in real-time
history is documented, and a live Motor voltage and generate reports.
diagnostic can be performed. You
can analyze the condition of the
pump based on individual reports M U LT I
and optimise it. The pump is thus PROTECTOR
protected from damage.
Installed in a control cabinet

Real-time diagnosis

Analyzer: MultiProtector

OFF
MultiProtector

2 threshold values
can be defined per
sensor. These can lead
to a warning signal or
switch off the pump.

Sensor for motor Sensor for leakage Sensor for monitoring Temperature sensor for Sensor for measuring
voltage and detection the media temperature dry-running protection the discharge pressure
temperature of the pump
Anytime and anywhere
Retrieve data and avoid downtime

With one click in the app, you can create a PDF report with error history, statistics and set parameters. You can use
this for documentation or also for troubleshooting.

NPS · 402 · 02 · 05/21 · 01 · Technical specifications are subject to change.

NETZSCH Pumpen & Systeme GmbH · Geretsrieder Straße 1 · 84478 Waldkraiburg · Germany
Tel.: +49 8638 63-0 · [email protected] · www.netzsch.com

You might also like