Pipe Fittings

These fittings are suitable for interconnecting piping, valves and other components in both wet and dry automatic sprinkler systems.
Installation should be according to applicable sprinkler system fabrication rules. These rules limit the minimum size of sprinkler piping
to 1 in., nominal. FM Approved pipe fittings of smaller sizes are intended for use as valve trim, gauge connections, and for other
peripheral service. The water flow path of the sprinkler system cannot be designed using smaller sizes than 1 in., nominal. Unless
otherwise noted in the listing, these fittings have 175 psi (1205 kPa) rated working pressure.
Threaded connections on fittings can be made to FM Approved threadable thinwall pipe or to Schedule 40 pipe. Refer to the "Steel
Pipe" listings for a summary of the various types of FM Approved steel pipe suitable for threading or grooving."
The fittings manufacturer's installation instructions must be observed in all cases. When connections are made to FM Approved pipe,
the pipe manufacturer's installation instructions must also be followed.
Unless otherwise stated below, the maximum ambient temperature to which these fittings should be subjected is 225°F (107°C).

Fittings, Side Outlet, Rigid

These fittings allow installation of a perpendicular branch line of reduced size, while joining inline pipes of equal diameters. These
fittings bolt over a hole in the run pipe, and allow installation of a perpendicular branch line of reduced size. The maximum branch
line size is one pipe size reduced from the run pipe size.

Models XGQT04, XGQT04G, 041, L922

Product Specification

Rated Working
Model Pressure
Description Nominal Pipe Size, in Remarks
No
psi (kPa)
2 x 1 1/4, 1 1/2
2 1/2 x 1 1/4, 1 1/2
76.1 mm x 1 1/4, 1 1/2
3 x 1 1/4, 1 1/2, 2
4 x 1 1/4, 1 1/2, 2, 2 1/2, 76.1
Mechanical Tee mm a, b, c, g, h, i, j, k,
XGQT04G 300 (2065)
(Grooved Outlet) 139.7 mm x 1 1/2, 2, 2 1/2 l
5 x 1 1/2, 2, 2 1/2
165.1 mm x 2, 76.1 mm
6 x 1 1/4, 1 1/2, 2, 2 1/2, 76.1
mm
8 x 2, 2 1/2, 76.1 mm, 3
Mechanical Tee 4x3 a, b, c, g, h, i, j, k,
XGQT04G 232 (1595)
(Grooved Outlet) 6 x 3, 4 l
2 x 1 1/4, 1 1/2
76.1 mm x 1 1/4, 1 1/2
3 x 1 1/4, 1 1/2, 2
Mechanical Tee 4 x 1 1/4, 1 1/2, 2, 2 1/2, 76.1
XGQT04G 300 (2065) d, g, h, i, j, k, l
(Grooved Outlet) mm
139.7 mm x 1 1/2, 2, 2 1/2
6 x 1 1/4, 1 1/2, 2, 2 1/2, 76.1
mm
Mechanical Tee 4x3
XGQT04G 232 (1595) d, g, h, i, j, k, l
(Grooved Outlet) 6 x 3, 4
76.1 mm x 1 1/4, 1 1/2
3 x 1 1/4, 1 1/2, 2
4 x 1 1/4, 1 1/2, 2, 2 1/2, 76.1
Mechanical Tee
XGQT04G mm 300 (2065) e, g, h, i, j, k, l
(Grooved Outlet)
139.7 mm x 1 1/2, 2, 2 1/2
6 x 1 1/4, 1 1/2, 2, 2 1/2, 76.1
mm
Mechanical Tee 4x3
XGQT04G 232 (1595) e, g, h, i, j, k, l
(Grooved Outlet) 6 x 3, 4

© 2007-2022 FM Approvals. All rights reserved. Page 1 of 3

 Mechanical Tee
XGQT04G 2 x 1 1/4, 1 1/2 300 (2065) f, g, h, i, j, k, l
(Grooved Outlet)
2 x 1/2, 3/4, 1, 1 1/4, 1 1/2
2 1/2 x 1/2, 3/4, 1, 1 1/4, 1 1/2
76 mm x 1/2, 3/4, 1, 1 1/4, 1 1/2
3 x 1/2, 3/4, 1, 1 1/4, 1 1/2, 2
108 mm x 1, 1 1/4, 1 1/2, 2
4 x 1, 1 1/4, 1 1/2, 2, 2 1/2
Mechanical Tee 5 x 1, 1 1/4, 1 1/2, 2, 2 1/2 a, b, c, g, h, i, j, k,
XGQT04 300 (2065)
(Threaded Outlet) 133 mm x 1, 1 1/4, 1 1/2, 2 l
140 mm x 1, 1 1/4, 1 1/2, 2
6 x 1, 1 1/4, 1 1/2, 2, 2 1/2
159 mm x 1, 1 1/4, 1 1/2, 2
165 mm x 1, 1 1/4, 1 1/2, 2, 2
1/2
8 x 1, 1 1/4, 1 1/2, 2, 2 1/2, 3
2 x 1/2, 3/4, 1, 1 1/4, 1 1/2
76 mm x 1/2, 3/4, 1, 1 1/4, 1 1/2
Mechanical Tee 3 x 1/2, 3/4, 1, 1 1/4, 1 1/2, 2
XGQT04 300 (2065) d, g, h, i, j, k, l
(Threaded Outlet) 4 x 1, 1 1/4, 1 1/2, 2, 2 1/2
139.7 mm x 1, 1 1/4, 1 1/2, 2
6 x 1, 1 1/4, 1 1/2, 2, 2 1/2
2 x 1/2, 3/4, 1, 1 1/4, 1 1/2
76 mm x 1/2, 3/4, 1, 1 1/4, 1 1/2
Mechanical Tee 3 x 1/2, 3/4, 1, 1 1/4, 1 1/2, 2
XGQT04 300 (2065) e, g, h, i, j, k, l
(Threaded Outlet) 4 x 1, 1 1/4, 1 1/2, 2, 2 1/2
139.7 mm x 1, 1 1/4, 1 1/2, 2
6 x 1, 1 1/4, 1 1/2, 2, 2 1/2
Mechanical Tee
XGQT04 2 x 1/2, 3/4, 1, 1 1/4, 1 1/2 300 (2065) f, g, h, i, j, k, l
(Threaded Outlet)
1 1/4 x 1/2, 3/4, 1
1 1/2 x 1/2, 3/4, 1
Mechanical Tee a, b, c, g, h, i, j, k,
L922 2 x 1/2, 3/4, 1 300 (2065)
(Threaded Outlet) l
2 1/2 x 1/2, 3/4, 1
76.1mm x 1/2, 3/4, 1
1 1/4 x 1/2, 3/4, 1
Mechanical Tee 1 1/2 x 1/2, 3/4, 1
L922 300 (2065) d, g, h, i, j, k, l
(Threaded Outlet) 2 x 1/2, 3/4, 1
76.1mm x 1/2, 3/4, 1
1 1/4 x 1/2, 3/4, 1
Mechanical Tee 1 1/2 x 1/2, 3/4, 1
L922 300 (2065) e, g, h, i, j, k, l
(Threaded Outlet) 2 x 1/2, 3/4, 1
76.1mm x 1/2, 3/4, 1
Mechanical Tee
L922 2 x 1/2, 3/4, 1 300 (2065) f, g, h, i, j, k, l
(Threaded Outlet)
1 1/4 x 1/2, 3/4, 1
U-Bolt Mechanical 1 1/2 x 1/2, 3/4, 1
a, b, c, g, h, i, j, k,
41 Tee 2 x 1/2, 3/4, 1 300 (2065)
l
(Threaded Outlet) 2 1/2 x 1/2, 3/4, 1
76.1mm x 1/2, 3/4, 1
1 1/4 x 1/2, 3/4, 1
U-Bolt Mechanical
1 1/2 x 1/2, 3/4, 1
41 Tee 300 (2065) d, g, h, i, j, k, l
2 x 1/2, 3/4, 1
(Threaded Outlet)
76.1mm x 1/2, 3/4, 1
1 1/4 x 1/2, 3/4, 1
U-Bolt Mechanical
1 1/2 x 1/2, 3/4, 1
41 Tee 300 (2065) e, g, h, i, j, k, l
2 x 1/2, 3/4, 1
(Threaded Outlet)
76.1mm x 1/2, 3/4, 1

© 2007-2022 FM Approvals. All rights reserved. Page 2 of 3

 U-Bolt Mechanical
41 Tee 2 x 1/2, 3/4, 1 300 (2065) f, g, h, i, j, k, l
(Threaded Outlet)

Remarks:
a. Min schedule cut groove pipe to be joined: 6 in. or smaller - Schedule 40; 8 in. or larger - Schedule 30
b. Min schedule rolled groove pipe to be joined: 6 in. or smaller – Schedule 40; 8 in. or larger – Schedule 30
c. Min schedule rolled groove pipe to be joined: 6 in. or smaller - Schedule 10; 8 or 10 in. - 0.188 in. (5 mm) wall; 12 in. 0.250 in. (6.35
mm) wall
d. FM Approved for Use with Rolled Groove Chinese Standard GB/T 3091 Regular pipe
e. FM Approved for Use with Rolled Groove Chinese Standard GB/T 3091 Extra Heavy pipe
f. FM Approved for Use with Rolled and Cut Groove Chinese Standard GB/T 3091 Extra Heavy pipe
g. With EPDM gasket
h. Product is marked with acceptable trade name of either “LEDE”, “LENE” or “PREM”
i. FM Approved for Use with either a Red, Orange, Black, Yellow, Blue, Green or Silver Painted Surface Finish
j. FM Approved for Use with either a Red, Orange, Black, Yellow, Blue, Green or Silver Epoxy Powder Coat Surface Finish
k. FM Approved for Use with a Silvery White Colored Dacromet Surface Finish
l. FM Approved for Use with a Hot Dip Galvanized Surface Finish

Company Name: Shandong Lede Machinery Co. Ltd.

Company Address: No. 3998 West Weihuan N Rd, Weicheng Dist, Weifang City, Shandong 261057, China
Company Website: http://wflede.com
New/Updated Product Listing: No
Listing Country: China
Certification Type: FM Approved
Class of Work: 1920-Coupling & Fitting, All Type

© 2007-2022 FM Approvals. All rights reserved. Page 3 of 3