DISC BRAKE
M 1501 462ME-EN-2019-05 USB5-III
1501 462 E-EN-2019-05
Brake
B5-III USB5-III
M 1501 462 E-EN-2019-05
D2: Outer disc diameter
D2: D3:diameter
Outer disc Max. coupling or hub-Ø
D3: B:
Max. coupling orDisc width = 30 mm
hub-Ø
B: L: = 30 mm
Disc width R1 + 78.5 mm
L: R1 + 78.5 mm
Thruster type 121/6 201/6 301/6
Dimensions in mm 121/6
Thruster type 201/6 Braking torque M in Nm 400
301/6
D2 in mmD3
Dimensions R1 C Mmin MBraking
max Mmin M inMNm
torque max Mmin Mma
D2 D3 560 R1 265 C 140 Mmin 564 Mmax 3500 Mmin4500 Mmax 4000 Mmin 7000 Mmax 6000 1050
Mmin
630 345 181 605 4000 5500 5000 8000 7000 1200
560 265 140 564 3500 4500 4000 7000 6000 10500 6500
710 425 221 645 4500 6000 5500 9500 8500 1400
630 345 181 605 4000 5500 5000 8000 7000 12000 7500
800 515 266 690 5000 7000 6500 11000
D2: Outer 9500
disc diameter 1600
710 425 221 645 4500 6000 5500 9500 D3: 8500 14000 9000
900 615 316 740 6000 8000 7500 Max.12500coupling or11000
hub-Ø 1850
800 515 266 690 5000 7000 6500 11000 B: 9500 16000 10000
1000 715 366 790 6500 9000 8500 Disc14000
width = 30 mm,
12500 2050
900 615 316 740 6000 8000 7500 12500 11000 18500
others on request 11500
1000 715 L: 12500
R1 + 78,5 mm
•366 Brake790
linings of6500 9000 with 8500
sintered material 14000
standard brake disc material 20500
S355J2G3 13000
• The specified braking torques are based on an average friction coefficient µm = 0,4 w
• Brake linings of sintered material
conditioned brakewith standard
linings up to a brake disc
sliding material
speed of 60S355J2G3
m/s. Deviating parameters can reduce th
• The specified
• braking torques us
Please contact arewhenbased onthrusters
using an average frictionand/
with lifting- coefficient µm valves.
or lowering = 0,4 with grinded and
conditioned brake linings up to a sliding speed of 60 m/s. Deviating parameters can reduce the friction-coeffic
• Weight without thruster: 250 kg.
• Please contact
• us when using
Available thrusters with lifting- and/ or lowering valves.
options:
Thruster type 121/6thruster:
Weight without 201/6 301/6 400/6
• o 250 kg. executions
Special for low and high ambient temperature
• Available options: o Manual release
Dimensions in mm o Special executions andBraking
for lowsensors torquetemperature
highforambient M in Nm
o Inductive indication “brake open”, “brake closed” and/ or “pad wear”.
D2:
r disc diameter
Outer disc diameter o Manual release
D2 D3 R1 C Mmin Mmax o Temperature
Mmin sensor
Mmax for brake linings
Mmin Mmax Mmin Mmax
D3:
couplingMax.
or hub-Ø
coupling or hub-Ø o Inductive sensors
o Load for indication “brake open”,
cell for monitoring “brake force
of clamping closed” and/ or “pad wear”.
560 265 140 564 o
3500 Temperature
4500 sensor for
4000 brake linings
7000 6000 10500 6500 13000
B:width = Disc
30 mmwidth = 30 mm o Load cell for monitoring of clamping force
630 345 181 605 4000 5500 5000 8000 7000 12000 7500
Alterations reserved 15500
L:78.5 mm
R1 + 78.5 mm SIBRE Siegerland-Bremsen GmbH – Auf der Stücke 1-5 – D-35708 Haiger, G
710 425 221 645 4500 6000 5500 9500 8500
Alterations 14000
reserved 9000 17500
Tel.: +49 2773 94000 – Fax: +49 2773 9400-10 – e-mail:
[email protected] – www
800 515 266 690 5000 7000 SIBRE Siegerland-Bremsen
6500 11000 GmbH – Auf der Stücke
9500 1-5 – D-35708
16000 10000 Haiger, Germany
20000
/Volumes/Server/Projekte/SIBRE/Broschüren/Kataloge/2020/Bremsen/Datenblätter/1. Disk Brake USB/USB5_III_2019_0
Tel.: +49 2773 94000 – Fax: +49 2773 9400-10 – e-mail:
[email protected] – www.sibre.de
ster type
Thruster
900 type
615 316 121/6
740 121/6
6000 201/68000 201/67500 301/6 12500301/6 11000 400/6 400/6
18500 11500 23000
/Volumes/Server/Projekte/SIBRE/Broschüren/Kataloge/2020/Bremsen/Datenblätter/1. Disk Brake USB/USB5_III_2019_05_EN.docx
1000
sionsDimensions
in mm 715
in mm 366 790 6500 9000 torque
Braking 8500
Braking Nm 14000
M in torque M in Nm 12500 20500 13000 26000
D2 R1D3 C R1 MminC MMmax
min MMmin
max MMmax
min MMmin
max MMmax
min MMmin
max MMmax
min Mmax
• Brake linings of sintered material with standard brake disc material S355J2G3
60 140265 564 140 3500 564 4500
3500 4000
4500 7000
4000 6000
7000 10500 6000 6500
10500 13000 6500 13000
• The specified braking torques are based on an average friction coefficient µm = 0,4 with grinded and optimum conditioned brake
30 181345 605linings
181 up 4000605
to a sliding5500
4000of 605000
speed 5500
m/s. 8000
Deviating5000
parameters 7000
8000
can reduce12000
7000
the 7500
12000 15500
friction-coefficient. 7500 15500
10 221425 645 221 contact
• Please 4500645us when 6000
4500 5500
6000with lifting-
using thrusters 9500
5500 and/ or8500
9500 valves.
lowering 14000
8500 9000
14000 17500 9000 17500
00 266515 690 266 without
• Weight 5000690thruster:
7000
5000
250 kg. 6500
7000 11000 6500 9500
11000 16000 9500 10000 16000 20000 10000 20000
00 316615 740316 6000 740 8000
6000 7500
8000 12500 7500 11000 12500 18500 11000 11500 18500 23000 11500 23000
• Available options:
000 366715 790 366 6500 790 9000
6500 8500
9000 14000 8500 12500 14000 20500 12500 13000 20500 26000 13000 26000
• Special executions for low and high ambient temperature
• Manual release
linings
• Brake
of sintered
liningsmaterial
• of sintered
Inductive with material
standard
sensors with
brakestandard
for indication disc material
“brakebrake
open”,disc
S355J2G3
material
“brake closed”S355J2G3
and/ or “pad wear”.
pecified
• Thebraking
specifiedtorques
brakingare torques
based onare an based
• Temperature sensor for brake liningsaverage
on an
friction
average
coefficient
frictionµmcoefficient
= 0,4 withµm grinded
= 0,4 with
and grinded
optimumand optimum
oned brake
conditioned
linings
• brake
up to alinings
Load sliding
cell upspeed
to a sliding
for monitoring ofof60 m/s.
speed
clampingDeviating
of 60 m/s.
force parameters
Deviatingcanparameters
reduce thecanfriction-coefficient.
reduce the friction-coefficient.
•contact
Please
us when
contact
using
usthrusters
when using withthrusters
lifting- and/
withorlifting-
lowering
and/valves.
or lowering valves.
t •without
Weight
thruster:
without
250 thruster:
kg. 250 kg.
ble
• options:
Available options:
Special executions
o Specialfor executions
low and high
Alterationsfor low
ambient
reserved and high
temperature
– SIBRE ambient temperature
Siegerland-Bremsen GmbH – Auf der Stücke 1-5 – D-35708 Haiger, Germany
Manual release
o Manual release Tel.: +49 2773 94000 – Fax: +49 2773 9400-10 – e-mail:
[email protected] – www.sibre.de
