aerospace
climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding
© abcdefghijklmn
Fast Switching Valve
Lucifer 2-way fast response
and long life solenoid valves
Applications Technical Data
2/2 magnalift solenoid valve used for air control or air pulsing in all applications where extremely short response
time and/or long life expectancy are required. Function: 2/2 solenoid valve closed when de-energized.
Flow rate up to 40 Nm3/h (subsonic flow only) like: textile weaving looms, printing machines, sorting machines, Design: Pilot operated poppet valve with magnalift.
bank note counting machines. Mounting: For direct pipe mounting or with the help of M5x6 mm screw (see dimensions).
Mounting position: Indifferent.
Material specifications: Forged brass body. Internal parts in stainless steel. Sealing material in PUR.
Features Range of admissible
pressure drop:
∆p min. = 0 bar
∆p max. = 7 bar
Response time (see p. 2): Conditions: voltage 24 VDC nominal, flow 34 Nm3/h.
Torque 20 Nm for 299560 housing Torque 10 Nm for 2994 & 2995 housing Reference pressure dynamic (orifice 2): 4.5 bar.
(self locking nut 492681) (nut 484018) Response times are increasing above starting from 300 millions cycles.
Switching on: TE on: 9.5 - 12 ms
• 2P+E DIN 43650A plug • High performance plunger with • PUR seat disc provides Electrical response time until the plunger is in fully attracted position.
connection low residual magnetic effect and magnalift effect T on: 10-14 ms
long life Filling time until the pressure has reached 50% of output pressure P2
• Degree of protection IP65
(own volume of the valve, outlet port plugged.)
• Shock absorber improves life
• Guide rings assure high life Switching off: TD off: 4 - 8 ms
expectamcy of the valve
expectancy Closing time until the plunger is in the rest position.
T off: 5,5 - 9,5 ms
Emptying time until the pressure has dropped to 50% of P2 pressure.
This response time is depending on user at the outlet port.
Cycling rate: Up to 30 Hz.
Section drawing Life expectancy: > 500 millions cycles
Conditions: Instrumentation dryed and filtered air at 20 µm, (dew point +2°C).
of the 221 J 3311 Typical reponse times
At 20 Hz (40% on) Media:
P max. 5 bar nominal voltage 24 VDC vibrations 5 to 500 Hz.
Instrumentation air (dryed and unlubricated) filtered at 20 µm.
Fluid temperature: Min. 0°C. Max. + 40°C.
Ambient temperature: 0°C to +50°C.
Vibrations: Up to 1500 Hz, max. shocks 10 g.
At max. vibration rating, life expectancy will decrease.
Electrical part: 32 mm coil 483816 (14W DC) encapsulated in synthetic material.
Connection with 3 pin DIN 43650 type A plug connector, degree of protection IP 65.
Solenoid duty: Relative duty time:
80% max. for cycle 30 Hz (33ms).
70% max. for cycle 20 Hz (50ms).
55% max. for cycle 10 Hz (100ms).
25% max. for cycle 1 hour (this valve can not work at ED 100%).
x % = Energized time ÷ 100
Cycle time
Housing: 3 possibilities 2994/2995/299560.
Voltage: 24 V DC.
Voltage tolerance: ±10%.
Flow rate (valve on 100%) Class of insulation material: Class F (155 °C).
Part kit: Nothing available
Port Size: G 3/8
Orifice: mm 8
Qmax: Nm³/ h 40
Admissible differential min. 0
pressure: bar Max. 7
Maximum admissible Air 40
fluid temperature: C°
References N°: Valve 221 J 3311
Housing 2994 2995 299560
Coil 483816
Power consumption: W 14
Weight: g 360
Applications Technical Data
2/2 magnalift solenoid valve used for air control or air pulsing in all applications where extremely short response
time and/or long life expectancy are required. Function: 2/2 solenoid valve closed when de-energized.
Flow rate up to 40 Nm3/h (subsonic flow only) like: textile weaving looms, printing machines, sorting machines, Design: Pilot operated poppet valve with magnalift.
bank note counting machines. Mounting: For direct pipe mounting or with the help of M5x6 mm screw (see dimensions).
Mounting position: Indifferent.
Material specifications: Forged brass body. Internal parts in stainless steel. Sealing material in PUR.
Features Range of admissible
pressure drop:
∆p min. = 0 bar
∆p max. = 7 bar
Response time (see p. 2): Conditions: voltage 24 VDC nominal, flow 34 Nm3/h.
Torque 20 Nm for 299560 housing Torque 10 Nm for 2994 & 2995 housing Reference pressure dynamic (orifice 2): 4.5 bar.
(self locking nut 492681) (nut 484018) Response times are increasing above starting from 300 millions cycles.
Switching on: TE on: 9.5 - 12 ms
• 2P+E DIN 43650A plug • High performance plunger with • PUR seat disc provides Electrical response time until the plunger is in fully attracted position.
connection low residual magnetic effect and magnalift effect T on: 10-14 ms
long life Filling time until the pressure has reached 50% of output pressure P2
• Degree of protection IP65
(own volume of the valve, outlet port plugged.)
• Shock absorber improves life
• Guide rings assure high life Switching off: TD off: 4 - 8 ms
expectamcy of the valve
expectancy Closing time until the plunger is in the rest position.
T off: 5,5 - 9,5 ms
Emptying time until the pressure has dropped to 50% of P2 pressure.
This response time is depending on user at the outlet port.
Cycling rate: Up to 30 Hz.
Section drawing Life expectancy: > 500 millions cycles
Conditions: Instrumentation dryed and filtered air at 20 µm, (dew point +2°C).
of the 221 J 3311 Typical reponse times
At 20 Hz (40% on) Media:
P max. 5 bar nominal voltage 24 VDC vibrations 5 to 500 Hz.
Instrumentation air (dryed and unlubricated) filtered at 20 µm.
Fluid temperature: Min. 0°C. Max. + 40°C.
Ambient temperature: 0°C to +50°C.
Vibrations: Up to 1500 Hz, max. shocks 10 g.
At max. vibration rating, life expectancy will decrease.
Electrical part: 32 mm coil 483816 (14W DC) encapsulated in synthetic material.
Connection with 3 pin DIN 43650 type A plug connector, degree of protection IP 65.
Solenoid duty: Relative duty time:
80% max. for cycle 30 Hz (33ms).
70% max. for cycle 20 Hz (50ms).
55% max. for cycle 10 Hz (100ms).
25% max. for cycle 1 hour (this valve can not work at ED 100%).
x % = Energized time ÷ 100
Cycle time
Housing: 3 possibilities 2994/2995/299560.
Voltage: 24 V DC.
Voltage tolerance: ±10%.
Flow rate (valve on 100%) Class of insulation material: Class F (155 °C).
Part kit: Nothing available
Port Size: G 3/8
Orifice: mm 8
Qmax: Nm³/ h 40
Admissible differential min. 0
pressure: bar Max. 7
Maximum admissible Air 40
fluid temperature: C°
References N°: Valve 221 J 3311
Housing 2994 2995 299560
Coil 483816
Power consumption: W 14
Weight: g 360
Worldwide division headquarters
Parker Lucifer SA
Fluid Control Division Europe
16 Ch. Faubourg-de-Cruseilles
CH - 1227 Carouge / Geneva
Tel.: +41 22 30 77 111
Fax: +41 22 30 77 110
www.parker.com/fcde
[email protected]Parker Hannifin S.p.A
Fluid Control Division Europe
Via E. Fermi, 5
IT - 20060 Gessate (Milan)
Tel.: + 39 02 95 125 1
Fax: + 39 02 95 382 051
www.parker.com/fcde
[email protected]Parker Hannifin Corporation
Fluid Control Division
95 Edgewood Ave.
USA - New Britain,
CT 06051-4100
Tel.: +1 (860) 827 2300
Fax: +1 (860) 827 2384
www.parker.com/fcd
[email protected]Parker Hannifin Corporation
Fluid Control Division
147 West Hoy Road
USA - Madison,
MS 39110-9357
Tel.: +1 (601) 856 4123
Fax: +1 (601) 853 7250
www.parker.com/fcd
[email protected]Parker Korea Ltd.
777 Jungri, Dongtanmyeon,
KR - Hwasungsi, Kyunggido,
445-813
Tel.: +(82) 31 379 2200
Fax: +(82) 31 377 9710
www.parker.com
© 2007 Parker Lucifer SA - 12/2007 8674/UK
Parker Lucifer SA
Fluid Control Division Europe
16 Ch. Faubourg-de-Cruseilles
CH - 1227 Carouge / Geneva
Tel.: +41 22 30 77 111
Fax: +41 22 30 77 110
www.parker.com/fcde
[email protected]
