KDL-NX720 HX820 XBR-HX929 Qs
KDL-NX720 HX820 XBR-HX929 Qs
fm
4-270-401-13(1)
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US02REG.fm
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US02REG.fm
Your BRAVIA TV is
ENERGY STAR®
qualified in the “Home”
mode.
It meets strict energy
efficiency guidelines
set by the U.S.
Environmental Protection Agency and
Department of Energy. ENERGY
STAR is a joint program of these
government agencies, designed to
promote energy efficient products and
practices.
Changes to certain features, settings,
and functionalities of this TV (i.e. Rovi
On Screen Guide, Picture/Sound, Light
Sensor, Power Savings) can increase or
change the power consumption.
Depending upon such changed settings,
the power consumption may exceed the
limits required for the ENERGY STAR
qualification in the “Home” mode.
~
• Features may differ depending on the
model/region/area.
• The illustrations of the remote control
used in this manual are of the
RM-YD059 unless otherwise stated.
• The illustrations used in this manual
may differ depending on your TV
model.
• Retain this manual for future
reference.
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US02REG.fm
The following chart shows the high-definition (HD) and standard-definition (SD) video
formats supported by your BRAVIA TV inputs.
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US02REG.fm
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US01TOC.fm
Table of Contents
Getting Started
Checking the accessories ........................................................................................... 8
Inserting batteries into the remote control................................................................... 8
Before setting up your TV ........................................................................................... 9
1: Attaching the Table-Top Stand (except XBR-65HX929)....................................... 10
2: Adjusting the viewing angle of the TV ................................................................... 11
3: Connecting the TV ................................................................................................ 12
4: Securing the TV .................................................................................................... 18
5: Bundling the cables............................................................................................... 20
6: Running initial setup.............................................................................................. 20
Using a Wall-Mount Bracket...................................................................................... 21
Installing the TV Against a Wall or Enclosed Area.................................................... 22
Using Your BRAVIA TV
Watching the TV........................................................................................................ 24
Selecting various functions and settings (Home Menu) ............................................ 26
Displaying Operating Instructions (i-Manual) ............................................................ 28
Programming the Remote Control
(For RM-YD057 and RM-YD067 remote control users) ...................................... 30
Network Setup
Preparing a wired network ........................................................................................ 31
Preparing a wireless LAN.......................................................................................... 32
Setting up the Internet connection ............................................................................ 32
If you cannot connect to the Internet......................................................................... 34
Adjusting the server display settings......................................................................... 34
Additional Information
Troubleshooting ........................................................................................................ 35
How to Care for Your BRAVIA .................................................................................. 36
Specifications ............................................................................................................ 37
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US01TOC.fm
This TV has a built-in manual (i-Manual). To access the i-Manual, press i-MANUAL on the
remote control, and select an item. For details, see page 28 of this manual. Contents of the
i-Manual may differ depending on the model/region/area.
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
Getting Started
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
• If you are having problems with the • For best picture quality, do not expose
remote control, reinsert or replace your the screen to direct illumination or
batteries and make sure that they are sunlight.
correctly inserted. • Avoid installing the TV in a room with
reflective wall and floor materials.
• Avoid moving the TV from a cold area
to a warm area. Sudden room
Before setting up your TV
temperature changes may cause moisture
Some TV models are packaged with a condensation. This may cause the TV to
detached Table-Top Stand so you can show poor picture and/or poor color.
mount your TV to a wall right away. If you Should this occur, allow moisture to
Getting Started
are not mounting the TV to a wall, you will evaporate completely before powering
need to attach the Table-Top Stand. You the TV on.
will need a Phillips screwdriver (not • Ensure that there are no objects in front
supplied) and maybe also a hexagon wrench of the TV.
(supplied with some models) and the • Do not expose the Intelligent Presence
supplied screws to complete the task. Look Sensor to direct sunlight or other strong
for the supplied Table-Top Stand instruction light, as malfunction may occur.
leaflet.
IR Sensor
Be sure to consider the following while
setting up your TV:
• Disconnect all cables when carrying the
TV.
• Carry the TV with the adequate number 3D Sync Transmitter
of people; larger size TVs require two or
Intelligent
more people. Presence Sensor
• Correct hand placement while carrying
the TV is very important for safety and
to avoid damage.
XBR-65HX929
KDL-60/55/
46NX720,
XBR-55/46HX929,
KDL-55/46HX820
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
For KDL-60NX720
1: Attaching the Table-Top
Stand (except 1 Align with the two dowels of the
Table-Top Stand, and gently place
XBR-65HX929) the TV, checking that the f mark is
Refer to the supplied Table-Top Stand facing the front.
instruction leaflet for proper attachment.
~
• Do not put stress on the LCD panel or the
frame around the screen.
• Be careful to not pinch your hands or the AC
power cord when you install the TV unit to the
Table-Top Stand.
For XBR-55/46HX929,
KDL-55/46HX820 and
Neck
KDL-55/46NX720
1 Place the TV unit on the Table-Top
Stand. 2 Attach the TV and Table-Top Stand
with the supplied screw and hexagon
wrench.
Guide
pins
*
~
• Align the TV from the top, slide it in until the
guide pins cannot be seen.
Head
2 Use the supplied screws to attach the
TV unit to the Table-Top Stand.
~ ~
• If you use an electric screwdriver, set the • Tighten to approximately 3 N·m {30 kgf·cm}.
torque at approximately 1.5 N·m {15 kgf·cm}.
10
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
Getting Started
• When adjusting the angle, hold the stand with
Head one hand to avoid having the stand slip or TV
tip over.
20° 20°
20° 20°
Soft cloth
Angle adjustment (Tilt)
(except XBR-65HX929/
~ KDL-60NX720)
• Do not remove the Table-Top Stand for any
reason other than to install corresponding 0° - 6°
accessories on the TV.
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
• When installing the TV on a wall, remove the
screws from the rear of the TV. The screws and
number of screws depends on the TV model.
(They are fastened in the screw holes for wall
mounting.) Be sure to store the removed
screws in a safe place, keeping them away
from children.
• When attaching the Table-Top Stand again, be
sure to fasten the screws (previously removed)
to the original holes on the rear of the TV.
11
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
B Except XBR-65HX929
3: Connecting the TV
~
• Use an antenna cable connector no greater than
14 mm thick.
• Use an HDMI cable connector within 12 mm
(thickness) × 21 mm (width).
B XBR-65HX929
1.5 mm max.
(Reference drawing of the F type plug)
12
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
B XBR-65HX929
Getting Started
Video/Component Adapter
(supplied)
(Continued) 13
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
B XBR-65HX929
Cable or
Antenna
Cable or
Antenna
*A/V Receiver
*Rear of TV
*Blu-ray Disc
HD Cable Box or
HD Satellite Receiver
SAT
(Dish)
Cable/
Antenna
14
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
B Except XBR-65HX929
*Side Panel
*A/V Receiver
*Rear of TV
*Blu-ray Disc
Getting Started
**Optical
HD Cable Box or Connection
HD Satellite Receiver
SAT
(Dish)
Cable/
Antenna
(Continued) 15
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
*Optical Connection
or
Rear of TV
Home Theater System
Blu-ray Disc/DVD
B Except XBR-65HX929
*Optical
Connection Side Panel
or
Rear of TV
Cable/
Antenna Blu-ray Disc/DVD
Video/Component
Adapter
Cable/SAT (Dish)
SD Cable Box or
SD Satellite Receiver
* The optical connection is only needed for A/V receivers that do not support ARC (Audio
Return Channel).
16
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
Side Panel
Notebook PC
Rear of TV
PC
or
Getting Started
Splitter
VCR DVD
VCR/DVD Combo
Cable/Antenna
B Except XBR-65HX929
Side Panel
Notebook PC
Rear of TV
PC
or
Video/Component
Adapter
Splitter
VCR DVD
VCR/DVD Combo
Cable/Antenna
17
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
18
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
Machine
screw (not
supplied) Rope or
Wall- chain
mount (not
Rope or chain holes supplied)
(not supplied)
Getting Started
Screw hole on the
Table-Top Stand Screw (not supplied)
Wall-anchor
(not
The length of the M6/M4 machine screw supplied)
differs depending on the rope or chain
diameter. Please refer to below illustration.
Screw M6/M4
Rope or
5-6 mm chain
TV’s
Table-Top
Stand
~
~
• Your TV is shipped with screws attached to the
Contact Sony Customer Support to obtain the
rear of the TV depending on the TV model.
optional Support Belt Kit by providing your TV
(They are fastened in the screw holes for wall
model name.
mounting.) Be sure to remove the upper two
• For United States call: 1-800-488-7669 or
screws prior to anchoring the TV on a wall.
visit: www.sony.com/accessories
• Securing the TV to the stand without securing
• For Canada call: 1-877-899-7669
the TV and the stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow
the three measures recommended.
19
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
XBR-65HX929
1 Complete your cable connections
before proceeding with the Initial
Setup.
1 2 Connect the TV to your nearest
power outlet.
2 Check the ENERGY SAVING
switch setting is on (z).
3 4
3 Press 1 (power) on the TV. The "
KDL-60/55/46NX720, (power) indicator will light green.
XBR-55/46HX929 and When you switch the TV on for the
KDL-55/46HX820
first time, the Language menu
appears on the screen.
~
• When you turn on the TV for the first time, the
1 2
TV requires some internal processing for
optimization before you can perform the initial
setup. There will be no picture and sound, and
the timer indicator on the front of the TV
blinks orange for about 40 seconds. Do not turn
3 4 off the TV during this process. This process
has been completed at the factory on some
TVs.
*
20
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
Getting Started
• Home mode sets the TV to settings optimized installing this TV, especially to
for home viewing (this setting is ENERGY determine the strength of the wall for
STAR compliant). withstanding the TV’s weight.
5 Select Continue to scan for • Be sure to use the screws supplied with
available channels and enable the the Wall-mount bracket when attaching
Rovi On Screen Guide™ feature. the mounting hooks to the TV set.
If you receive channels from a cable The supplied screws are designed so that
box or satellite receiver and do not they are 8 mm to 12 mm in length when
wish to use the TV’s built-in tuner, measured from the attaching surface of
select Skip. the mounting hook.
Selecting Skip will disable the Rovi The diameter and length of the screws
On Screen Guide feature, which differ depending on the Wall-mount
is only available when the TV’s bracket model. Use of screws other than
tuner is used. those supplied may result in internal
damage to the TV set or cause it to fall,
~
• If you skip the channel scan while in the setup etc.
menus, Rovi On Screen Guide will be disabled. 8-12 mm
Screw
(supplied with the
Using a Wall-Mount Wall-mount bracket)
21
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
Leave at
least this
much space
4 inches (10 cm)
around the
set.
Wall Wall
~
• Inadequate ventilation can lead to overheating
of the TV and may cause damage to your TV
or cause a fire.
22
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
23
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US04SAF.fm
Watching the TV
2 or
GUIDE
2
To use 0-9
For example, to enter 2.1, press ,
and .
24
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US04SAF.fm
25
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US04SAF.fm
1 Press HOME.
2
1, 3 To select items in the Home menu
(e.g., selecting “Settings”)
1 Press G/g to select Settings.
The contents of Settings are
displayed on the right.
2 Press F/f to select Picture &
Display.
3 Press to launch the menu.
According to the screen instruction,
press F/f/G/g to select items and
press to confirm.
26
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US04SAF.fm
27
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US04SAF.fm
1 Press i-MANUAL.
1
2 Press F/f/G/g/
select items.
to navigate and
2
To select items in the i-Manual
1 Press F/f to select an item.
The contents are displayed to the right
as the second layer.
2 Press g to move to the second layer.
3 Press F/f to select an item from the
second layer.
A description of the item is displayed
to the right.
If a third layer is available, repeat this
step to display the details.
4 Press g to select an item.
The content is displayed.
28
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US04SAF.fm
~
• Last page memory is automatically reset when you switch the TV to standby mode.
29
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US04SAF.fm
30
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US05OVR.fm
Network Setup
When you connect this TV to the Internet, Except XBR-65HX929
you can enjoy multiple functions:
displaying a photograph that shows its Internet
location on the map, enjoying Internet
video, etc. For details on the functions, refer
to the i-Manual.
Modem
~ with router
• You will need to contract with an Internet functions
service provider to connect to the Internet. or
Network Setup
Preparing a wired network
Router
For XBR-65HX929
TV
Modem
Internet
Internet
Modem
with router
functions
or ~
• For LAN connections, use a Category 7 cable
(not supplied).
TV
Router
Modem
Internet
31
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US05OVR.fm
Modem YES m
YES m
Type 1*
32
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US05OVR.fm
Network Setup
equipment to a TV in a non-secure status.
2 Select Wireless Setup.
3 Select WPS (Push Button) for
Push Button method or WPS (PIN) Type 3: Unsecured network
for PIN method. with any type of wireless LAN
~ router
• Button name of the WPS may differ
depending on the router (e.g. AOSS To set up a wireless LAN, SSID (wireless
button). network name) will be required.
4 Follow the instructions on the setup 1 Press HOME, then select >
screen. Network > Network Setup.
2 Select Wireless Setup.
Type 2: Secured network 3 Select Scan, then select a network
without Wi-Fi Protected Setup from the list of scanned wireless
(WPS) networks.
To set up a wireless LAN, SSID (wireless 4 Follow the instructions on the setup
network name) and security key (WEP or screen.
WPA key) will be required. If you do not ~
know them, consult the instruction manual • Security key (WEP or WPA key) will not be
of your router. required because you do not need to select any
security method in this procedure.
1 Press HOME, then select >
Network > Network Setup.
2 Select Wireless Setup.
(Continued) 33
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US05OVR.fm
34
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US06OPT.fm
Additional Information
Troubleshooting
When the 1 (standby) indicator is flashing, count how many times it flashes
(interval time is three seconds).
Press 1 (power) on the TV to turn it off, disconnect the AC power cord, and contact Sony
Customer Support (information provided on the front cover) with how many times the
indicator flashes.
When the 1 (standby) indicator is not flashing, check the items in the table as
follows.
Also refer to “Troubleshooting” in the i-Manual. If the problem persists, contact Sony
Customer Support (information provided on the front cover).
Additional Information
Condition Explanation/Solution
There is no picture • Check the antenna/cable connection.
(screen is dark) and no • Connect the TV to the AC power, and press 1 (power) on
sound. the TV.
• If the 1 (standby) indicator lights up in red, press "/1 (or
TV "/1) on the remote control.
Tiny black dots and/or • The screen is composed of pixels. Tiny black dots and/or
bright dots appear on the bright dots (pixels) on the screen do not indicate a
screen. malfunction.
Some programs cannot • Check the antenna or dish.
be tuned.
The TV’s power cannot • Check to see the (z) mark on the ENERGY SAVING
be turned on. switch is pressed.
The TV turns off • Check if the Sleep Timer, Timer, or Idle TV Standby is
automatically (the TV activated.
enters standby mode). • The Auto Shut-off setting may be set to On. If Auto
Shut-off is activated and TV receives no signal, the TV will
automatically enter standby mode in 15 minutes. Check
Auto Shut-off is activated under Eco feature of this TV.
(United States and Canada only)
• Check if Presence Sensor in Eco is activated. When no
viewer is detected in front of the TV for a preset time, the
picture automatically turns off, while leaving only the TV
sound on. Additionally, after 30 minutes in picture off mode,
the TV will switch to standby mode.
(Continued) 35
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US06OPT.fm
Condition Explanation/Solution
The remote control does • Replace the batteries.
not function. • Your TV may be in SYNC mode. Press SYNC MENU,
select TV Control and then select Home (Menu) or
Options to control the TV.
The TV and its • When the TV is used for an extended period of time, the TV
surrounding become and its surroundings may become warm to touch. This is not
warm. a malfunction of the TV.
The Parental Lock • Enter 4357 for the PIN code. (PIN code 4357 is always
password has been accepted.)
forgotten.
36
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US06OPT.fm
Specifications
System
Television system NTSC: American TV standard
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
Panel system LCD (Liquid Crystal Display) Panel
Speaker output 10 W + 10 W + 10 W + 10 W (for KDL-60NX720)
10 W + 10 W + 10 W (except KDL-60NX720)
Input/Output jacks
CABLE/ANTENNA 75-ohm external terminal for RF inputs
VIDEO IN 1/2 VIDEO / AUDIO
COMPONENT IN YPBPR (Component Video) / Signal format: 480i, 480p, 720p, 1080i, 1080p
AUDIO
HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 720/24p/30p, 1080i, 1080p, 1080/24p/30p
HDMI: Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analog audio input (minijack) (HDMI IN 4 only)
ARC (Audio Return Channel) (HDMI IN 1 only)
AUDIO OUT/Headphones 500 mVrms (typical)
Stereo mini jack / Impedance: 16 ohms
DIGITAL AUDIO OUT PCM/Dolby Digital optical signal
Additional Information
(OPTICAL)
PC IN D-sub 15-pin, analog RGB
PC/HDMI 4 AUDIO IN Stereo mini jack
LAN 10BASE-T/100BASE-TX connector (Connection speed may differ depending on the
network environment. 10BASE-T/100BASE-TX communication rate and communication
quality are not guaranteed for this TV.)
USB/DLNA Refer to the i-Manual for supported format.
REMOTE RS232C, D-sub 9 pin.
(HX929 series only)*1 This jack is for receiving the external control signal.
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US06OPT.fm
38
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US06OPT.fm
Additional Information
norme NMB-003 du Canada. Use the following Sony optional accessories with your
TV model.
FCC Related Information
This equipment has been tested and found to comply Sony TV Model No.
with the limits for a Class B digital device, pursuant to KDL-/XBR- 65HX929 60NX720 55HX929 46HX929
Part 15 of the FCC Rules. These limits are designed to
55HX820 46HX820
provide reasonable protection against harmful
interference in a residential installation. This 55NX720 46NX720
equipment generates, uses and can radiate radio Sony Wall-
frequency energy and, if not installed and used in Mount
accordance with the instructions, may cause harmful SU-WL700/
Bracket SU-WL500
interference to radio communications. However, there SU-WL500
Model
is no guarantee that interference will not occur in a No.*1
particular installation. If this equipment does cause
harmful interference to radio or television reception, Sony Wall-
which can be determined by turning the equipment off Hanging
and on, the user is encouraged to try to correct the Bracket – SU-WH500
interference by one or more of the following measures: Model
❑ Reorient or relocate the receiving antenna. No.*1
❑ Increase the separation between the equipment and Sony TV
receiver. SU- SU-
Stand –
❑ Connect the equipment into an outlet on a circuit 2 B551S B461S
No.*
different from that to which the receiver is
connected. Use with other optional accessories may cause instability
❑ Consult the dealer or an experienced radio/TV and could result in property damage or injury.
technician for help. *1 For instructions on using with your TV please go to
http://esupport.sony.com for your TV model and
Pursuant to FCC regulations, you are cautioned that download “Additional Information for Using Sony
any changes or modifications not expressly Wall-Mount Bracket” or “Additional Information for
approved in this manual could void your authority to Using Sony Wall-Hanging Bracket”.
operate this equipment. *2 Some of these TV stand models may not be available
in your area.
To Customers
Sufficient expertise is required for TV installations. Be
sure to subcontract the installation to a Sony dealer or
licensed contractor and pay adequate attention to safety
during the installation.
39
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
For Your Convenience
Be sure to register your TV.
Online
Registration: United States http://productregistration.sony.com
Canada http://www.SonyStyle.ca/registration
Your TV is capable of receiving software updates. For the
latest information about software updates for your TV, visit:
United States http://www.sony.com/tvsupport
Software
Canada http://www.sony.ca/support
Updates:
NOTE: If your TV is connected to the Internet, you can check
for software updates by selecting Settings, Product
Support and then Software Update.
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)