Sclairpipe ®

HDPE FITTINGS C A T A L O G U E
Introduction

Having long been a world leader in advance extrusion technology of polyethylene pipes in North America
and abroad, KWH Pipe has a world class fabrication facility location in Saskatoon, Saskatchewan to serve
the needs of its customers.

The same care, precision and rigorous quality standards demanded by our Quality Assurance Department
for extruded pipes also applies to all fabricated and custom fittings produced by KWH Pipe. Each and
every fitting is produced to exact standards and is inspected prior to shipping. Production records are
kept for all fabricated and custom fittings to ensure that they are produced in accordance with quality
and field tested procedures.

KWH Pipe was the first North American manufacturer of polyethylene pipe and fittings to get their Quality
Management System registered to the ISO 9000 series standard. Thirty years of experience in
demanding North American markets have developed our skills, knowledge and experience to a level
unsurpassed by our competitors. With the largest available diameter range of Factory Mutual approved
fittings and the ability to manufacture fittings in accordance with AWWA C906 already in place on many
of our products, not to mention extensive mining, industrial and municipal experience in nearly all types
of installations, we are well equipped to serve the needs of almost any application.

Our highly skilled engineering and technical staff are available to lend their assistance and expertise to
complicated design and/or installation problems as they arise.

 Also available:


o PE4710 and PE100 Fittings

o AWWA C906 approved Fittings (upon request)
o Fittings qualified to ASTM F2206 and ASTM D3261
o DIPS Fittings
o Eccentric Reducers
o Custom assemblies

Product Availability:

KWH stocks a large inventory of pipe and fittings. Items highlighted in green bold in this brochure are
standard inventory items. KWH offers a 24 hour shipping policy on all standard inventory items. For
more information, please contact the KWH Pipe sales representative in your region.

Product availability of fittings listed in this brochure are subject to the availability of material.

The accuracy or applicability of all information contained herein is intended as a guide and is not guaranteed. Hence, KWH Pipe
assumes no obligation or liability for this information. All tables and statements may be considered as recommendations but not as
warranty. Users of our products should perform their own tests to determine the suitability of each such product for their particular
purpos es .KWHPi pe’sli
abi li
tyf ordef ectivepr oduc t
sislimi tedt ot her eplac
ement ,withoutc hargeofanypr oductfoundt obe
defective. Under no circumstances shall it be responsible for any damages beyond the price of the products, and in no event shall it
be liable for consequential damages.

Page 2
Table of Contents
Sclairpipe Fitting Design 4
General Specifications and Material Standards 5
Sclairpipe Fittings (IPS) Dimensional Information
Elbows
11.25 Degree Elbow (2 Segment) 6
22.5 Degree Elbow (2 Segment) 7
30 Degree Elbow (2 Segment) 8
45 Degree Elbow (2 Segment) 9
45 Degree Elbow (3 Segment) 10
60 Degree Elbow (3 Segment) 11
90 Degree Elbow (3 Segment) 12
90 Degree Elbow (4 Segment) 13
90 Degree Elbow (5 Segment) 14
Tees/Laterals/Crosses
Crosses 15
Straight Tees 16
Reducing Tees 17
Sidewall Tees 18
Laterals (45 Degrees) 19
Machined Components
Concentric Reducers 20
Wall Anchors 21
Stub Ends 22
Flange Adapters 25
Other
Custom Fabrication 28
Molded Fittings 28
Flange Specifications 29
Flange Connection Information 30
Flange Product Information
Convoluted Ductile Iron ASTM A536 32
Convoluted Stainless Steel ASTM A351CF8M for 316 SS 33
Steel Plate Group ASTM A36 34
Steel Plate Blind ASTM A36 36
FM Approved Fittings –4”t o28”Di amet
erRange
11.25 Degree Elbow (2 Segment) 38
22.5 Degree Elbow (2 Segment) 39
30 Degree Elbow (2 Segment) 40
45 Degree Elbow (3 Segment) 41
60 Degree Elbow (3 Segment) 42
90 Degree Elbow (4 Segment) 43
90 Degree Elbow (5 Segment) 44
Straight Tee 45
Sidewall Tee 46
Reducing Tee 48
Concentric Reducers 49
Stub Ends 50
Flange Adapters 51
Butterfly Valve Spacer Rings 52
Convoluted Ductile Iron ASTM A536 53
Steel Plate Flange ASTM A36 54
Carbon Steel Blind ASTM A105 55

Page 3
Sclairpipe Fitting Design

Fabricated fittings for use in pressure service are manufactured in the same diameters as Sclairpipe but
with heavier walls than are used in the piping system. This results in a fitting with a pressure rating
which is greater than or equal to the pipe itself. Unless specifically stated otherwise, the additional wall
thickness is on the ID. The butt weld ends of the fittings are counter bored to meet the wall thickness of
the mating pipe (see figure 1). KWH Pipe recommends that fittings be ordered by EDR (Equivalent
Dimensional Ratio). The pressure rating of the EDR fittings is the same as that associated with the DR of
the matching pipe. The table below details the pipe DR used to fabricate the appropriate EDR fitting.

All fabricated fittings can be supplied with either flanged ends and/or plain ends for field butt fusion to
the piping system.

Pressure Pressure
Fitting Wall Rating Rating
Fitting Description EDR Pipe DR
Thickness PE3608 PE4710
(psi) (psi)
Elbows and Sidewall Approximately 25% 254 320 7.3 6.3
Tees Greater Wall 200 252 9 7.3
Thickness than pipe 160 202 11 9
128 161 13.5 11
100 126 17 13.5
80 101 21 17
64 81 26 21
50 64 32.5 26
Straight Tees, Laterals Approximately 50% 200 252 9 6.3
and Crosses Greater Wall 160 202 11 7.3
Thickness than pipe 128 161 13.5 9
100 126 17 11
80 101 21 13.5
64 81 26 17
50 64 32.5 21
Stub Ends, Flange Same DR as pipe 200 252 - 9
Adapters, Wall 160 202 - 11
Anchors and Reducers 128 161 - 13.5
100 126 - 17
80 101 - 21
64 81 - 26
50 64 - 32.5

Figure 1: Counter bore end detail

ID1: Matches the adjoining pipe ID

ID2: Matches ID of the pipe feed stock for fitting

Page 4
Sclairpipe Fittings general specifications & material standards

Reference Specifications:
ASTM D3350: Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
AWWA C906: Standard for Polyethylene (PE) Pressure Pipe and Fittings 4 in. Through 63in., for Water
Distribution
ASTM F2206: Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic
Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
ASTM D3261: Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for
Polyethylene (PE) Plastic Pipe and Tubing
FM 1613: Approval Standard for Plastic Pipe and Fittings for Underground Fire Protection Service

Material:
The pipe shall be made from polyethylene resin compound with a minimum cell classification of PE
345464C for PE3608 materials and PE 445574C for PE4710 materials in accordance with ASTM D3350.
This material shall have a Long Term Hydrostatic Strength of 1600 psi when tested an analyzed by ASTM
D2837, and shall be a Plastic Pipe Institute (PPI) TR4 listed compound.
The raw material shall contain a minimum of 2% carbon black. Additives, which can be conclusively
proven not to be detrimental to the pipe may also be used, provided that the pipe produced meets the
requirements of this standard.
Thepi pes hallcont ai
nnor ec ycl
edc ompoundex c eptthatgener at
edi nthemanuf ac tur
er ’
sownpl antf r
om
resin of the same specification and from the same raw material supplier.
Compliance with the requirements of this paragraph shall be certified in writing by the pipe supplier, upon
request.
Manuf acturer’sQual i
tySy stem s hallbec erti
fiedbyanappr opri
ateindependentbodyt omeett he
requirements of the ISO 9001:2000 Quality Management Program.

Marking:
All standard fabricated fittings shall be identified with the type of fitting, the applicable product standard
(if any), the nominal pipe size, EDR rating, the pipe material, location of production and date of
pr oduc ti
on,s alesor dernumber ,i
tem # ( appl icabletos al
esor der )and“ Madei nCanada” ,byper manent
label affixed to the fitting.

Joining Methods:
Whenever possible, polyethylene pipe should be joined by the method of thermal butt fusion as outlined
in ASTM F2620, Standard Practice for Heat Fusion Joining of PE Pipe and Fittings. Butt fusion joining of
pipe and fittings shall be performed in accordance with the procedures recommended by the
manufacturer. The temperature of the heater plate should be between 400ºF and 450ºF. Follow the
recommendations of ASTM F2620 regarding interfacial pressures for pipe wall thickness less than or
equalt o1. 5”.Follow t hemanuf ac
turer ’
sr ecommendat i
onsr egardi
nginterfaci
alpr es s
uresforpi pewal ls
thickert han1. 5”.
Polyethylene pipe may be connected to fittings or other piping systems by means of a flanged assembly
consisting of a polyethylene flange adapter or stub end, and a metal backup ring that has a bolting
pat t
ernmeet i
ngt hedi mens ionalrequi r
ement sofCl ass150,ANSIB16. 1/B16.5i ns izesupt horugh24” ,
and meeting Class 150 Series A, ANSI B16.47 or AWWA C207 Class B for larger sizes. Follow the
manuf ac t ur er
’srecommendat ionsregar dingbol t
ingt echniquesandt heus eofgas ket s
.
Pipe or fittings may be joined by butt fusion only by technicians who have been trained and qualified in
the use of the equipment.

General Requirements:
The pipe manufacturer shall provide, upon request, an outline of quality control procedures performed on
polyethylene system components.

Page 5
 IPS 11.25 DEG ELBOW - 2 SEGMENT

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
R S C R S C
(psi) (psi)
7.3 254 2 7.3 254 106
9 200 2 9 200 94
3 3.50 24.6 4.7 4.5 18 18.00 54.7 9.9 9.0
11 160 1 11 160 78
17 100 1 17 100 55
7.3 254 3 9 200 118
9 200 3 11 160 99
4 4.50 27.6 5.2 5.0 20 20.00 55.7 10.0 9.0
11 160 2 17 100 69
17 100 2 21 80 55
7.3 254 8 9 200 171
9 200 7 11 160 143
6 6.63 28.7 5.3 5.0 22 22.00 66.8 12.1 11.0
11 160 6 17 100 100
17 100 4 21 80 81
7.3 254 15 9 200 207
9 200 14 11 160 173
8 8.63 34.8 6.4 6.0 24 24.00 67.8 12.2 11.0
11 160 11 17 100 120
17 100 8 21 80 97
7.3 254 26 9 200 246
9 200 23 11 160 206
10 10.75 38.4 7.0 6.5 26 26.00 68.8 12.3 11.0
11 160 20 17 100 143
17 100 14 21 80 116
7.3 254 46 11 160 242
9 200 40 17 100 169
12 12.75 47.0 8.6 8.0 28 28.00 69.8 12.4 11.0
11 160 34 21 80 136
17 100 24 26 64 112
7.3 254 59 13.5 128 236
9 200 52 17 100 197
14 14.00 50.2 9.2 8.5 30 30.00 70.8 12.5 11.0
11 160 44 21 80 159
17 100 30 26 64 130
7.3 254 78 17 100 220
9 200 69 21 80 178
16 16.00 51.2 9.3 8.5 32M 31.64 71.7 12.6 11.0
11 160 58 26 64 146
17 100 40 32.5 50 119

Note: Large diameter fittings available up to 63M. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.
Page 6
 IPS 22.5 DEG ELBOW - 2 SEGMENT

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
R S C R S C
(psi) (psi)
7.3 254 2 7.3 254 123
9 200 2 9 200 109
3 3.50 13.1 4.8 4.5 18 18.00 31.6 10.8 9.0
11 160 1 11 160 92
17 100 1 17 100 64
7.3 254 4 9 200 139
9 200 3 11 160 117
4 4.50 14.8 5.4 5.0 20 20.00 32.6 11.0 9.0
11 160 3 17 100 81
17 100 2 21 80 66
7.3 254 8 9 200 200
9 200 7 11 160 167
6 6.63 15.9 5.7 5.0 22 22.00 38.7 13.2 11.0
11 160 6 17 100 117
17 100 4 21 80 94
7.3 254 17 9 200 244
9 200 15 11 160 204
8 8.63 19.4 6.9 6.0 24 24.00 39.7 13.4 11.0
11 160 13 17 100 142
17 100 9 21 80 115
7.3 254 30 9 200 293
9 200 27 11 160 246
10 10.75 21.7 7.6 6.5 26 26.00 40.7 13.6 11.0
11 160 22 17 100 171
17 100 16 21 80 138
7.3 254 52 11 160 292
9 200 46 17 100 203
12 12.75 26.5 9.3 8.0 28 28.00 41.7 13.8 11.0
11 160 39 21 80 164
17 100 27 26 64 135
7.3 254 67 13.5 128 288
9 200 59 17 100 239
14 14.00 28.4 9.9 8.5 30 30.00 42.7 14.0 11.0
11 160 50 21 80 193
17 100 35 26 64 158
7.3 254 91 17 100 270
9 200 80 21 80 218
16 16.00 29.4 10.1 8.5 32M 31.60 43.5 14.1 11.0
11 160 67 26 64 179
17 100 47 32.5 50 146

Note: Large diameter fittings available up to 63M. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.
Page 7
 IPS 30 DEG ELBOW - 2 SEGMENT

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
R S C R S C
(psi) (psi)
7.3 254 2 7.3 254 136
9 200 2 9 200 120
3 3.50 10.1 5.0 4.5 18 18.00 25.8 11.4 9.0
11 160 1 11 160 101
17 100 1 17 100 70
7.3 254 4 9 200 154
9 200 3 11 160 129
4 4.50 11.6 5.6 5.0 20 20.00 26.8 11.7 9.0
11 160 3 17 100 90
17 100 2 21 80 73
7.3 254 9 9 200 219
9 200 8 11 160 184
6 6.63 12.6 5.9 5.0 22 22.00 31.5 13.9 11.0
11 160 7 17 100 128
17 100 5 21 80 103
7.3 254 19 9 200 270
9 200 17 11 160 226
8 8.63 15.5 7.2 6.0 24 24.00 32.5 14.2 11.0
11 160 14 17 100 157
17 100 10 21 80 127
7.3 254 33 9 200 326
9 200 29 11 160 273
10 10.75 17.5 7.9 6.5 26 26.00 33.5 14.5 11.0
11 160 24 17 100 190
17 100 17 21 80 154
7.3 254 56 11 160 326
9 200 50 17 100 227
12 12.75 21.3 9.7 8.0 28 28.00 34.5 14.8 11.0
11 160 42 21 80 183
17 100 29 26 64 150
7.3 254 73 13.5 128 323
9 200 64 17 100 268
14 14.00 22.9 10.4 8.5 30 30.00 35.5 15.0 11.0
11 160 54 21 80 217
17 100 38 26 64 178
7.3 254 99 17 100 304
9 200 88 21 80 246
16 16.00 23.9 10.6 8.5 32M 31.64 36.3 15.2 11.0
11 160 74 26 64 201
17 100 51 32.5 50 164

Note: Large diameter fittings available up to 63M. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.

Page 8
 IPS 45 DEG ELBOW - 2 SEGMENT

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
R S C R S C
(psi) (psi)
7.3 254 38 9 200 261
9 200 34 11 160 219
10 10.75 13.2 8.7 6.5 22 22.00 24.3 15.6 11.0
11 160 28 17 100 152
17 100 20 21 80 123
7.3 254 65 9 200 324
9 200 58 11 160 271
12 12.75 16.0 10.6 8.0 24 24.00 25.3 16.0 11.0
11 160 49 17 100 189
17 100 34 21 80 153
7.3 254 85 9 200 395
9 200 75 11 160 331
14 14.00 17.3 11.4 8.5 26 26.00 26.3 16.4 11.0
11 160 63 17 100 230
17 100 44 21 80 186
7.3 254 117 11 160 398
9 200 104 17 100 277
16 16.00 18.3 11.8 8.5 28 28.00 27.3 16.8 11.0
11 160 87 21 80 224
17 100 61 26 64 184
7.3 254 161 13.5 128 397
9 200 143 17 100 330
18 18.00 19.9 12.7 9.0 30 30.00 28.3 17.2 11.0
11 160 120 21 80 267
17 100 83 26 64 219
9 200 186 17 100 376
11 160 155 21 80 304
20 20.00 20.9 13.1 9.0 32M 31.64 29.1 17.6 11.0
17 100 108 26 64 249
21 80 87 32.5 50 203

Note: Large diameter fittings available up to 63M. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.
Molded fittings available 3" to 8"

Page 9
 IPS 45 DEG ELBOW - 3 SEGMENT

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
R S C R S C
(psi) (psi)
7.3 254 3 7.3 254 203
9 200 3 9 200 180
3 3.50 13.1 7.7 4.5 18 18.00 31.6 17.6 9.0
11 160 2 11 160 150
17 100 2 17 100 105
7.3 254 6 9 200 230
9 200 5 11 160 193
4 4.50 14.8 8.6 5.0 20 20.00 32.6 18.0 9.0
11 160 4 17 100 134
17 100 3 21 80 109
7.3 254 13 9 200 328
9 200 12 11 160 275
6 6.63 15.9 9.1 5.0 22 22.00 38.7 21.5 11.0
11 160 10 17 100 191
17 100 7 21 80 155
7.3 254 28 9 200 403
9 200 25 11 160 337
8 8.63 19.4 11.0 6.0 24 24.00 39.7 21.9 11.0
11 160 21 17 100 235
17 100 14 21 80 190
7.3 254 49 9 200 487
9 200 44 11 160 408
10 10.75 21.7 12.2 6.5 26 26.00 40.7 22.3 11.0
11 160 36 17 100 284
17 100 25 21 80 229
7.3 254 84 11 160 487
9 200 75 17 100 339
12 12.75 26.5 15.0 8.0 28 28.00 41.7 22.8 11.0
11 160 62 21 80 274
17 100 43 26 64 225
7.3 254 109 13.5 128 482
9 200 96 17 100 401
14 14.00 28.4 16.0 8.5 30 30.00 42.7 23.2 11.0
11 160 81 21 80 324
17 100 56 26 64 265
7.3 254 148 17 100 454
9 200 131 21 80 367
16 16.00 29.4 16.4 8.5 32M 31.64 43.5 23.5 11.0
11 160 110 26 64 301
17 100 77 32.5 50 245

Note: Large diameter fittings available up to 63M. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.

Page 10
 IPS 60 DEG ELBOW - 3 SEGMENT

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
R S C R S C
(psi) (psi)
7.3 254 3 7.3 254 227
9 200 3 9 200 201
3 3.50 10.1 8.1 4.5 18 18.00 25.8 19.4 9.0
11 160 2 11 160 169
17 100 2 17 100 117
7.3 254 6 9 200 260
9 200 5 11 160 218
4 4.50 11.6 9.2 5.0 20 20.00 26.8 20.0 9.0
11 160 5 17 100 152
17 100 3 21 80 123
7.3 254 15 9 200 368
9 200 13 11 160 308
6 6.63 12.6 9.8 5.0 22 22.00 31.5 23.7 11.0
11 160 11 17 100 214
17 100 8 21 80 173
7.3 254 31 9 200 454
9 200 27 11 160 380
8 8.63 15.5 12.0 6.0 24 24.00 32.5 24.3 11.0
11 160 23 17 100 265
17 100 16 21 80 214
7.3 254 54 9 200 552
9 200 48 11 160 462
10 10.75 17.5 13.4 6.5 26 26.00 33.5 24.9 11.0
11 160 40 17 100 322
17 100 28 21 80 260
7.3 254 93 11 160 555
9 200 82 17 100 387
12 12.75 21.3 16.3 8.0 28 28.00 34.5 25.4 11.0
11 160 69 21 80 312
17 100 48 26 64 256
7.3 254 120 13.5 128 552
9 200 107 17 100 459
14 14.00 22.9 17.4 8.5 30 30.00 35.5 26.0 11.0
11 160 89 21 80 371
17 100 62 26 64 304
7.3 254 165 17 100 522
9 200 147 21 80 422
16 16.00 23.9 18.0 8.5 32M 31.64 36.3 26.5 11.0
11 160 123 26 64 346
17 100 85 32.5 50 282

Note: Large diameter fittings available up to 63M. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.
Page 11
 IPS 90 DEG ELBOW - 3 SEGMENT

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
R S C R S C
(psi) (psi)
7.3 254 65 9 200 451
9 200 58 11 160 378
10 10.75 13.2 16.5 6.5 22 22.00 24.3 29.8 11.0
11 160 48 17 100 263
17 100 34 21 80 213
7.3 254 111 9 200 563
9 200 98 11 160 471
12 12.75 16.0 20.0 8.0 24 24.00 25.3 30.8 11.0
11 160 82 17 100 328
17 100 57 21 80 265
7.3 254 144 9 200 690
9 200 128 11 160 578
14 14.00 17.3 21.5 8.5 26 26.00 26.3 31.8 11.0
11 160 107 17 100 402
17 100 75 21 80 325
7.3 254 202 11 160 700
9 200 179 17 100 487
16 16.00 18.3 22.5 8.5 28 28.00 27.3 32.8 11.0
11 160 150 21 80 394
17 100 104 26 64 323
7.3 254 279 13.5 128 701
9 200 247 17 100 583
18 18.00 19.9 24.4 9.0 30 30.00 28.3 33.8 11.0
11 160 207 21 80 471
17 100 144 26 64 386
9 200 323 17 100 666
11 160 270 21 80 538
20 20.00 20.9 25.4 9.0 32M 31.64 29.1 34.6 11.0
17 100 188 26 64 441
21 80 152 32.5 50 360

Note: Large diameter fittings available up to 63M. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.
Molded fittings available 3" to 8"

Page 12
 IPS 90 DEG ELBOW - 4 SEGMENT

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
R S C R S C
(psi) (psi)
7.3 254 4 7.3 254 318
9 200 4 9 200 282
3 3.50 10.1 12.4 4.5 18 18.00 25.8 30.3 9.0
11 160 3 11 160 236
17 100 2 17 100 165
7.3 254 8 9 200 366
9 200 7 11 160 306
4 4.50 11.6 14.1 5.0 20 20.00 26.8 31.3 9.0
11 160 6 17 100 213
17 100 4 21 80 172
7.3 254 20 9 200 516
9 200 18 11 160 432
6 6.63 12.6 15.1 5.0 22 22.00 31.5 37.0 11.0
11 160 15 17 100 301
17 100 11 21 80 243
7.3 254 43 9 200 639
9 200 38 11 160 535
8 8.63 15.5 18.5 6.0 24 24.00 32.5 38.0 11.0
11 160 32 17 100 372
17 100 22 21 80 301
7.3 254 76 9 200 779
9 200 67 11 160 652
10 10.75 17.5 20.8 6.5 26 26.00 33.5 39.0 11.0
11 160 56 17 100 454
17 100 39 21 80 367
7.3 254 129 11 160 784
9 200 115 17 100 546
12 12.75 21.3 25.3 8.0 28 28.00 34.5 40.0 11.0
11 160 96 21 80 441
17 100 67 26 64 362
7.3 254 168 13.5 128 782
9 200 149 17 100 650
14 14.00 22.9 27.1 8.5 30 30.00 35.5 41.0 11.0
11 160 124 21 80 525
17 100 87 26 64 430
7.3 254 231 17 100 740
9 200 205 21 80 598
16 16.00 23.9 28.1 8.5 32M 31.64 36.3 41.8 11.0
11 160 172 26 64 490
17 100 120 32.5 50 400

Note: Large diameter fittings available up to 63M. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.

Page 13
 IPS 90 DEG ELBOW - 5 SEGMENT

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
R S C R S C
(psi) (psi)
7.3 254 5 7.3 254 361
9 200 5 9 200 320
3 3.50 13.1 15.3 4.5 18 18.00 31.6 36.1 9.0
11 160 4 11 160 268
17 100 3 17 100 187
7.3 254 10 9 200 413
9 200 9 11 160 345
4 4.50 14.8 17.3 5.0 20 20.00 32.6 37.1 9.0
11 160 7 17 100 241
17 100 5 21 80 194
7.3 254 24 9 200 585
9 200 21 11 160 490
6 6.63 15.9 18.4 5.0 22 22.00 38.7 44.2 11.0
11 160 18 17 100 341
17 100 12 21 80 276
7.3 254 49 9 200 721
9 200 44 11 160 603
8 8.63 19.4 22.4 6.0 24 24.00 39.7 45.2 11.0
11 160 37 17 100 420
17 100 25 21 80 339
7.3 254 87 9 200 874
9 200 77 11 160 732
10 10.75 21.7 25.0 6.5 26 26.00 40.7 46.2 11.0
11 160 65 17 100 510
17 100 45 21 80 412
7.3 254 148 11 160 877
9 200 132 17 100 611
12 12.75 26.5 30.5 8.0 28 28.00 41.7 47.2 11.0
11 160 110 21 80 494
17 100 77 26 64 405
7.3 254 192 13.5 128 871
9 200 170 17 100 724
14 14.00 28.4 32.6 8.5 30 30.00 42.7 48.2 11.0
11 160 143 21 80 585
17 100 99 26 64 479
7.3 254 263 17 100 822
9 200 234 21 80 664
16 16.00 29.4 33.6 8.5 32M 31.64 43.5 49.0 11.0
11 160 196 26 64 544
17 100 136 32.5 50 444

Note: Large diameter fittings available up to 63M. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.

Page 14
 IPS CROSS

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
S V S V
(psi) (psi)
9 200 5 9 200 148
11 160 5 11 160 132
3 3.50 15.5 6.0 14 14.00 32.0 9.0
17 100 3 17 100 92
21 80 3 21 80 77
9 200 9 9 200 202
11 160 8 11 160 179
4 4.50 16.5 6.0 16 16.00 34.0 9.0
17 100 5 17 100 125
21 80 5 21 80 104
9 200 20 9 200 284
11 160 18 11 160 252
6 6.63 18.6 6.0 18 18.00 38.0 10.0
17 100 13 17 100 177
21 80 11 21 80 147
9 200 46 11 160 322
11 160 41 17 100 226
8 8.63 24.6 8.0 20 20.00 40.0 10.0
17 100 28 21 80 188
21 80 24 26 64 152
9 200 75 11 160 663
11 160 66 17 100 465
10 10.75 26.8 8.0 22 22.00 62.0 20.0
17 100 47 21 80 386
21 80 39 26 64 312
9 200 110 11 160 804
11 160 98 17 100 564
12 12.75 28.8 8.0 24 24.00 64.0 20.0
17 100 69 21 80 469
21 80 57 26 64 379

Note: Large diameter fittings available. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.

Page 15
IPS STRAIGHT TEE

Dimensions (in) Pressure Class

Weight
NPS OD avg. EDR PE3608
(lbs)
S V (psi)

9 200 61
11 160 55
10 10.75 26.8 8.0
17 100 38
21 80 32
9 200 90
11 160 80
12 12.75 28.8 8.0
17 100 55
21 80 46
9 200 122
11 160 108
14 14.00 32.0 9.0
17 100 76
21 80 63
9 200 168
11 160 147
16 16.00 34.0 9.0
17 100 104
21 80 86
9 200 236
11 160 208
18 18.00 38.0 10.0
17 100 148
21 80 120
11 160 269
17 100 188
20 20.00 40.0 10.0
21 80 157
26 64 126
11 160 533
17 100 374
22 22.00 62.0 20.0
21 80 311
26 64 251
11 160 650
17 100 456
24 24.00 64.0 20.0
21 80 379
26 64 306

Note: Large diameter fittings available. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.
Molded fittings available 3" to 8"

Page 16
IPS REDUCING TEE

Dimensions (in)
Weight
NPS Main Outlet EDR
S V T (lbs)
Diameter Diameter
8x6 8.63 6.63 24.6 12.3 16 9 44
10x8 10.75 8.63 26.8 13.4 18 9 76
12x10 12.75 10.75 28.8 14.4 20 9 113
14x10 14.00 10.75 32.0 16.0 23 9 155
14x12 14.00 12.75 32.0 16.0 23 9 153
16x14 16.00 14.00 34.0 17.0 23 9 209
16x12 16.00 12.00 34.0 17.0 23 9 209
18x16 18.00 16.00 38.0 19.0 24 9 288
18x14 18.00 14.00 38.0 19.0 24 9 330
18x16x12 18.00 12.75 38.0 19.0 38* 9 331
20x18 20.00 18.00 40.0 20.0 24 11 326
20x18x16 20.00 16.00 40.0 20.0 38* 11 372
20x18x14 20.00 14.00 40.0 20.0 38* 11 375
22x20 22.00 20.00 62.0 31.0 36 11 611
22x20x18 22.00 18.00 62.0 31.0 36 11 668
22x18x16 22.00 16.00 62.0 31.0 50* 11 662
22x18x14 22.00 14.00 62.0 31.0 50* 11 664
24x22 24.00 22.00 64.0 32.0 38 11 754
24x20 24.00 20.00 64.0 32.0 38 13.5 642
24x22x18 24.00 18.00 64.0 32.0 54* 11 836
24x20x16 24.00 16.00 64.0 32.0 52* 17 591

Note: *Indicates multistep step reducer required

Other sizes and DR's fittings available. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings.

Page 17
 IPS SIDEWALL TEES

Pressure Pressure
Dimensions (in) Dimensions (in)
Main Outlet Class Weight Main Outlet Class Weight
EDR EDR
NPS NPS PE3608 (lbs) NPS NPS PE3608 (lbs)
A B D A B D
(psi) (psi)
6 3 14.0 4.3 7.0 11 160 8 12 8 25.0 8.3 12.5 11 160 56
8 3 16.0 4.3 8.0 11 160 14 14 8 26.0 8.3 13.0 11 160 67
10 3 17.0 4.3 8.5 11 160 23 16 8 26.0 8.3 13.0 11 160 85
12 3 20.0 4.3 10.0 11 160 37 18 8 27.0 8.3 13.5 11 160 109
14 3 21.0 4.3 10.5 11 160 47 20 8 27.0 8.3 13.5 11 160 132
16 3 21.0 4.3 10.5 11 160 61 22 8 31.0 8.3 15.5 11 160 179
20 3 22.0 4.3 11.0 11 160 100 24 8 31.0 8.3 15.5 11 160 211
6 4 15.0 6.0 7.5 11 160 9 26 8 31.0 8.3 15.5 11 160 246
8 4 17.0 6.0 8.5 11 160 16 28 8 31.0 8.3 15.5 11 160 283
10 4 18.0 6.0 9.0 11 160 25 30 8 31.0 8.3 15.5 11 160 324
12 4 21.0 6.0 10.5 11 160 40 32M 8 53.0 8.3 26.5 13.5 128 506
14 4 22.0 6.0 11.0 11 160 52 48M 8 53.0 8.3 26.5 21 80 757
16 4 22.0 6.0 11.0 11 160 65 16 10 28.0 6.5 14.0 11 160 94
18 4 23.0 6.0 11.5 11 160 86 20 10 29.0 6.5 14.5 11 160 144
20 4 23.0 6.0 11.5 11 160 105 22 10 33.0 6.5 16.5 11 160 193
22 4 27.0 6.0 13.5 11 160 149 24 10 33.0 6.5 16.5 11 160 227
24 4 27.0 6.0 13.5 11 160 177 26 10 33.0 6.5 16.5 11 160 264
26 4 27.0 6.0 13.5 11 160 207 28 10 33.0 6.5 16.5 11 160 304
28 4 27.0 6.0 13.5 11 160 240 32M 10 55.0 6.5 27.5 13.5 128 321
30 4 27.0 6.0 13.5 11 160 275 36 10 55.0 6.5 27.5 17 100 344
32M 4 49.0 6.0 24.5 13.5 128 462 40M 10 55.0 6.5 27.5 21 80 549
10 6 20.0 8.0 10.0 11 160 32 48M 10 55.0 6.5 27.5 21 80 788
12 6 23.0 8.0 11.5 11 160 48 20 12 31.0 8.5 15.5 11 160 162
14 6 24.0 8.0 12.0 11 160 58 22 12 35.0 8.5 17.5 11 160 213
16 6 24.0 8.0 12.0 11 160 75 24 12 35.0 8.5 17.5 11 160 249
18 6 25.0 8.0 12.5 11 160 97 26 12 35.0 8.5 17.5 11 160 288
20 6 25.0 8.0 12.5 11 160 118 28 12 35.0 8.5 17.5 11 160 331
22 6 29.0 8.0 14.5 11 160 163 36 12 57.0 8.5 28.5 17 100 594
24 6 29.0 8.0 14.5 11 160 193 40M 12 57.0 8.5 28.5 21 80 574
26 6 29.0 8.0 14.5 11 160 226 48M 12 57.0 8.5 28.5 21 80 821
28 6 29.0 8.0 14.5 11 160 261 40M 14 58.0 15.0 29.0 21 80 596
30 6 30.0 8.0 15.0 11 160 309 28 16 38.0 15.0 19.0 11 160 394
32M 6 51.0 8.0 25.5 13.5 128 484 48M 20 64.0 15.0 32.0 21 80 959
48M 6 51.0 8.0 25.5 21 80 726
Note: Sizes up to 18x8 available in EDR7.3 and EDR9 and sizes up to 26x12 available in EDR9
Other sizes and DR's available. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.
Page 18
 IPS LATERALS

Pressure Pressure
Dimensions (in) Dimensions (in)
OD Class Weight OD Class Weight
NPS EDR NPS EDR
avg. PE3608 (lbs) avg. PE3608 (lbs)
M T P L M T P L
(psi) (psi)
9 200 9 9 200 269
11 160 8 11 160 239
3 3.50 19.0 9.7 2.0 3.5 14 14.00 38.4 13.9 4.0 6.0
17 100 6 17 100 167
21 80 5 21 80 139
9 200 17 9 200 391
11 160 15 11 160 347
4 4.50 22.8 10.9 2.5 4.5 16 16.00 42.8 15.3 5.0 6.0
17 100 11 17 100 243
21 80 9 21 80 202
9 200 44 9 200 535
11 160 39 11 160 475
6 6.63 26.9 12.4 3.0 4.5 18 18.00 46.2 16.7 5.0 6.0
17 100 27 17 100 333
21 80 23 21 80 277
9 200 84 11 160 626
11 160 74 17 100 439
8 8.63 30.8 12.8 4.0 5.0 20 20.00 49.7 17.1 5.0 7.0
17 100 52 21 80 365
21 80 43 26 64 295
9 200 140 11 160 791
11 160 124 17 100 555
10 10.75 33.4 13.2 4.0 5.0 22 22.00 52.1 17.6 5.0 7.0
17 100 87 21 80 461
21 80 72 26 64 373
9 200 210 11 160 999
11 160 186 17 100 701
12 12.75 35.8 13.6 4.0 5.0 24 24.00 55.6 18.0 5.0 8.0
17 100 130 21 80 582
21 80 108 26 64 471

Note: Other sizes and DR's available. Please call for a quick quote.
Refer to Sclairpipe Fitting Design (page 4) for pressure ratings for PE4710 fittings.

Page 19
 IPS CONCENTRIC REDUCERS

Dimensions (in) Dimensions (in)

DR DR
NPS NPS
D1 D2 L1 L2 R Range D1 D2 L1 L2 R Range

4x3 4.5 3.5 4.0 4.0 0.25 7.3 - 26 20x16 20 16 7.0 7.0 0.50 17 - 32.5
6x4x3* 6.63 3.5 8.0 8.0 0.25 7.3 - 26 20x18x16* 20 16 14.0 14.0 0.50 9 - 15.5
6x4 6.63 4.5 4.0 4.0 0.25 7.3 - 26 22x20x16* 22 16 15.0 15.0 0.50 17 - 32.5
8x4 8.63 4.5 5.0 5.0 0.25 7.3 - 26 24x20x16* 24 16 16.0 16.0 0.50 17 - 32.5
10x6x4* 10.75 4.5 10.0 10.0 0.25 9 - 32.5 20x18 20 18 7.0 7.0 0.50 9 - 32.5
12x8x4* 12.75 4.5 11.0 11.0 0.25 13.5 - 32.5 22x18 22 18 8.0 8.0 0.50 11 - 32.5
8x6 8.63 6.63 5.0 5.0 0.25 7.3 - 32.5 22x20x18* 22 18 16.0 16.0 0.50 9
10x6 10.75 6.63 6.0 6.0 0.25 9 - 32.5 24x22x18* 24 18 17.0 17.0 0.50 11 - 32.5
12x10x6* 12.75 6.63 12.0 12.0 0.25 9 - 32.5 22x20 22 20 8.0 8.0 0.50 9 - 32.5
14x10x6* 14 6.63 13.0 13.0 0.25 9 - 32.5 24x20 24 20 9.0 9.0 0.50 13.5 - 32.5
10x8 10.75 8.63 6.0 6.0 0.25 7.3 - 32.5 24x22x20* 24 20 17.0 17.0 0.50 9 & 11
12x8 12.75 8.63 6.0 6.0 0.25 13.5 - 32.5 26x24x20* 26 20 18.0 18.0 0.50 13.5 - 32.5
12x10x8* 12.75 8.63 12.0 12.0 0.25 7.3 - 11 28x24x20* 28 20 18.0 18.0 0.50 13.5 - 32.5
14x10x8* 14 8.63 13.0 13.0 0.25 9 - 32.5 24x22 24 22 9.0 9.0 0.50 9 - 32.5
16x12x8* 16 8.63 13.0 13.0 0.25 13.5 - 32.5 26x22 26 22 9.0 9.0 0.50 17 - 32.5
12x10 12.75 10.75 6.0 6.0 0.25 7.3 - 32.5 26x24x22* 26 22 18.0 18.0 0.50 9 - 15.5
14x10 14 10.75 7.0 7.0 0.50 9 - 32.5 28x24x22* 28 22 18.0 18.0 0.75 13.5 - 32.5
16x14x10* 16 10.75 14.0 14.0 0.50 9 - 32.5 30x26x22* 30 22 21.0 21.0 0.75 17 - 32.5
18x14x10* 18 10.75 14.0 14.0 0.50 9 - 32.5 26x24 26 24 9.0 9.0 0.50 9 - 32.5
14x12 14 12.75 7.0 7.0 0.50 7.3 - 32.5 28x24 28 24 9.0 9.0 0.75 13.5 - 32.5
16x12 16 12.75 7.0 7.0 0.50 9 - 32.5 28x26x24* 28 24 18.0 18.0 0.75 9 & 11
18x16x12* 18 12.75 14.0 14.0 0.50 9 - 32.5 30x28x24* 30 24 21.0 21.0 0.75 13.5 - 32.5
20x16x12* 20 12.75 14.0 14.0 0.50 17 - 32.5 28x26 28 26 9.0 9.0 0.75 9 - 32.5
16x14 16 14 7.0 7.0 0.50 7.3 - 32.5 30x26 30 26 12.0 12.0 0.75 9 - 32.5
18x14 18 14 7.0 7.0 0.50 9 - 32.5 30x28 30 28 12.0 12.0 0.75 9 - 32.5
20x18x14* 20 14 14.0 14.0 0.50 9 - 32.5 32Mx28* 31.64 28 12.0 12.0 0.75 17 - 32.5
22x18x14* 22 14 15.0 15.0 0.50 11 - 32.5 32Mx30* 31.64 30 12.0 12.0 0.75 11 - 32.5
18x16 18 16 7.0 7.0 0.50 7.3 - 32.5 42x40M* 42 39.55 12.0 12.0 1.00 17 - 32.5

Note: *Indicates a multi-step reducer - two reducers welded together

Standard reducers may be welded together in an assembly to achieve the required size reduction
PE4710 fittings available. Refer to Sclairpipe Fitting Design (page 4) for pressure ratings.

Page 20
IPS WALL ANCHOR

Dimensions (in)
A R C E F DR
NPS
Flange Range
Face OD Radius Neck OD Length
Thickness
3 5.18 0.25 3.50 6.06 0.98 7.3 to 32.5
4 6.60 0.25 4.50 6.06 0.98 7.3 to 32.5
6 8.50 0.25 6.63 8.00 1.06 7.3 to 32.5
8 10.72 0.25 8.63 11.00 1.26 7.3 to 32.5
10 13.11 0.50 10.75 12.00 1.50 7.3 to 32.5
12 15.57 0.50 12.75 11.00 1.85 7.3 to 32.5
14 17.27 0.50 14.00 11.00 2.36 7.3 to 32.5
16 19.32 0.50 16.00 12.13 2.36 7.3 to 32.5
18 21.18 0.50 18.00 14.13 2.76 9 to 32.5
20 23.45 0.50 20.00 14.13 2.76 9 to 32.5
22 25.35 0.50 22.00 14.13 2.76 9 to 32.5
24 27.58 0.50 24.00 14.13 2.76 9 to 32.5
26 30.21 0.50 26.00 14.13 3.27 9 to 32.5
28 31.43 0.50 28.00 14.13 3.27 9 to 32.5
30 34.20 0.50 30.00 14.13 3.27 11 to 32.5
32M 34.45 0.50 31.64 14.13 3.27 11 to 32.5
36 39.27 0.50 36.00 14.13 3.35 11 to 32.5
40M 43.08 0.50 39.55 22.00 3.54 15.5 to 32.5
42 45.00 0.50 42.00 22.00 3.54 13.5 to 32.5
48M 51.38 0.50 47.46 22.00 4.02 21 to 32.5
54 58.30 0.50 54.00 22.80 4.33 21 to 32.5
55M 58.30 0.50 55.37 22.80 4.33 21 to 32.5

Note: Other sizes and DR's available. Please call for a quick quote.
PE4710 fittings available. Refer to Sclairpipe Fitting Design (page 4) for pressure ratings.

Page 21
IPS STUB ENDS

Pressure
Dimensions (in) Weight
NPS DR PE3608
(lbs)
A R C E F (psi)
7.3 254 0.7
9 200 0.6
11 160 0.6
3 5.18 0.25 3.50 1.73 0.98 13.5 128 0.6
17 100 0.5
21 80 0.5
26 64 0.5
7.3 254 1.1
9 200 1.0
11 160 1.0
4 6.60 0.25 4.50 1.73 0.98 13.5 128 0.9
17 100 0.8
21 80 0.8
26 64 0.8
7.3 254 2
9 200 2
11 160 2
6 8.50 0.25 6.63 2.01 1.06 13.5 128 2
17 100 1
21 80 1
26 64 1
7.3 254 4
9 200 3
11 160 3
8 10.72 0.25 8.63 2.24 1.26 13.5 128 3
17 100 2
21 80 2
26 64 2
7.3 254 7
9 200 6
11 160 5
10 13.11 0.50 10.75 2.72 1.50 13.5 128 5
17 100 4
21 80 4
26 64 4
7.3 254 11
9 200 10
11 160 9
12 15.57 0.50 12.75 3.15 1.85 13.5 128 8
17 100 7
21 80 7
26 64 6
7.3 254 17
9 200 15
11 160 14
14 17.27 0.50 14.00 3.94 2.36 13.5 128 13
17 100 11
21 80 11
26 64 10

Page 22
IPS STUB ENDS

Pressure
Dimensions (in) Weight
NPS DR PE3608
(lbs)
A R C E F (psi)
7.3 254 21
9 200 19
11 160 17
16 19.32 0.50 16.00 3.94 2.36 13.5 128 15
17 100 14
21 80 13
26 64 12
9 200 26
11 160 23
13.5 128 21
18 21.18 0.50 18.00 4.53 2.76 17 100 19
21 80 17
26 64 16
32.5 50 14
9 200 33
11 160 29
13.5 128 26
20 23.45 0.50 20.00 4.72 2.76 17 100 23
21 80 21
26 64 19
32.5 50 18
9 200 40
11 160 35
13.5 128 31
22 25.35 0.50 22.00 5.12 2.76 17 100 28
21 80 25
26 64 22
32.5 50 20
9 200 47
11 160 42
13.5 128 37
24 27.58 0.50 24.00 5.12 2.76 17 100 32
21 80 29
26 64 26
32.5 50 24
9 200 63
11 160 56
13.5 128 50
26 30.21 0.50 26.00 5.51 3.27 17 100 45
21 80 40
26 64 37
32.5 50 34
9 200 67
11 160 59
13.5 128 52
28 31.43 0.50 28.00 5.51 3.27 17 100 45
21 80 41
26 64 36
32.5 50 33

Page 23
IPS STUB ENDS

Pressure
Dimensions (in) Weight
NPS DR PE3608
(lbs)
A R C E F (psi)
11 160 71
13.5 128 63
17 100 55
30 34.20 0.50 30.00 5.51 3.27
21 80 50
26 64 45
32.5 50 41
11 160 69
13.5 128 60
17 100 51
32M 34.45 0.50 31.64 5.51 3.27
21 80 45
26 64 40
32.5 50 35
11 160 90
13.5 128 78
17 100 68
36 39.27 0.50 36.00 5.51 3.35
21 80 59
26 64 53
32.5 50 47
15.5 110 88
17 100 83
40M 43.08 0.50 39.55 5.51 3.54 21 80 73
26 64 65
32.5 50 57
13.5 128 101
17 100 87
42 45 0.50 42.00 5.51 3.54 21 80 76
26 64 66
32.5 50 58
21 80 116
48M 51.38 0.50 47.46 6.30 4.02 26 64 102
32.5 50 91
21 80 161
54 58.3 0.50 54.00 6.89 4.33 26 64 142
32.5 50 125
21 80 149
55M 58.3 0.50 55.37 6.89 4.33 26 64 129
32.5 50 111
63M Available upon request

Note: Other sizes and DR's available. Please call for a quick quote.
PE4710 fittings available. Refer to Sclairpipe Fitting Design (page 4) for pressure ratings.

Page 24
IPS Flange Adapters

Pressure
Dimensions (in) Weight
NPS DR PE3608
(lbs)
A R C E F (psi)
7.3 254 1.4
9 200 1.2
11 160 1.1
3 5.18 0.25 3.50 6.06 0.98 13.5 128 1.0
17 100 0.9
21 80 0.8
26 64 0.7
7.3 254 2.3
9 200 2.0
11 160 1.8
4 6.60 0.25 4.50 6.06 0.98 13.5 128 1.6
17 100 1.4
21 80 1.3
26 64 1.1
7.3 254 6
9 200 5
11 160 4
6 8.50 0.25 6.63 8.00 1.06 13.5 128 4
17 100 3
21 80 3
26 64 2
7.3 254 12
9 200 11
11 160 9
8 10.72 0.25 8.63 11.00 1.26 13.5 128 8
17 100 7
21 80 6
26 64 5
7.3 254 21
9 200 18
11 160 15
10 13.11 0.50 10.75 12.00 1.50 13.5 128 13
17 100 11
21 80 10
26 64 8
7.3 254 28
9 200 24
11 160 21
12 15.57 0.50 12.75 11.00 1.85 13.5 128 18
17 100 15
21 80 13
26 64 12
7.3 254 36
9 200 31
11 160 27
14 17.27 0.50 14.00 11.00 2.36 13.5 128 24
17 100 20
21 80 18
26 64 16

Page 25
IPS Flange Adapters

Pressure
Dimensions (in) Weight
NPS DR PE3608
(lbs)
A R C E F (psi)
7.3 254 50
9 200 43
11 160 37
16 19.32 0.50 16.00 12.13 2.36 13.5 128 32
17 100 27
21 80 24
26 64 21
9 200 61
11 160 53
13.5 128 45
18 21.18 0.50 18.00 14.13 2.76 17 100 38
21 80 33
26 64 29
32.5 50 25
9 200 75
11 160 65
13.5 128 56
20 23.45 0.50 20.00 14.13 2.76 17 100 47
21 80 41
26 64 35
32.5 50 31
9 200 89
11 160 77
13.5 128 66
22 25.35 0.50 22.00 14.13 2.76 17 100 55
21 80 48
26 64 41
32.5 50 35
9 200 106
11 160 91
13.5 128 78
24 27.58 0.50 24.00 14.13 2.76 17 100 66
21 80 56
26 64 48
32.5 50 42
9 200 129
11 160 112
13.5 128 96
26 30.21 0.50 26.00 14.13 3.27 17 100 82
21 80 71
26 64 62
32.5 50 54
9 200 144
11 160 123
13.5 128 105
28 31.43 0.50 28.00 14.13 3.27 17 100 89
21 80 76
26 64 65
32.5 50 56

Page 26
IPS Flange Adapters

Pressure
Dimensions (in) Weight
NPS DR PE3608
(lbs)
A R C E F (psi)
11 160 144
13.5 128 124
17 100 105
30 34.20 0.50 30.00 14.13 3.27
21 80 90
26 64 78
32.5 50 68
11 160 150
13.5 128 128
17 100 106
32M 34.45 0.50 31.64 14.13 3.27
21 80 90
26 64 77
32.5 50 65
11 160 196
13.5 128 167
17 100 139
36 39.27 0.50 36.00 14.13 3.35
21 80 118
26 64 100
32.5 50 85
15.5 110 266
17 100 247
40M 43.08 0.50 39.55 22.00 3.54 21 80 207
26 64 174
32.5 50 146
13.5 128 331
17 100 272
42 45 0.50 42.00 22.00 3.54 21 80 228
26 64 190
32.5 50 159
21 80 299
48M 51.38 0.50 47.46 22.00 4.02 26 64 252
32.5 50 211
21 80 403
54 58.3 0.50 54.00 22.80 4.33 26 64 339
32.5 50 284
21 80 402
55M 58.3 0.50 55.37 22.80 4.33 26 64 336
32.5 50 278
63M Available upon request

Note: Other sizes and DR's available. Please call for a quick quote.
PE4710 fittings available. Refer to Sclairpipe Fitting Design (page 4) for pressure ratings.

Page 27
Custom Fabrication

Numerous years of experience with polyethylene pipe in literally all types of installations has developed
the skill level and experience of our technicians to a level unsurpassed in the industry. The vision of our
engineering and technical staff in solving and finding the solutions to complex design and installation
problems presented by our customers is realized through the "artistry" and "craft" of our fittings
fabricators. Our 3D modeling and engineering simulation software allows us to predict how product
designs will behave in real-world environments. The possibilities and potential configurations are
endless.

Molded Fittings

KWH Pipe offers a full line of molded fittings in all common configurations at very competitive price
levels. The resins used to produce these components meet the same standards and specifications as is
used to produce Sclairpipe and conventional fabricated fittings. Depending on the requirement and
design relative to each situation, the user has the option to select these items for substantial cost
reductions where appropriate.

Page 28
Flanges

KWH Pipe Stocks and distributes a full line of flanges in several

materials, which are produced in accordance with strict quality
standards. The standard coating for flanges is red oxide
primer, but also available is epoxy coated and hot dip
galvanized. The material used to produce these components,
meets the requirements as detailed in Table 1: Flange
Specifications

Table 1: Flange Specifications

Flange Description Material Specification Size Dimensional Specifications

Range
Convoluted Ductile Ductile Iron 3”to63” ASME/ANSI B16.5 Class 150
Iron Flanges ASTM A536 ASME/ANSI B16.1 Class 125
ASME/ANSI B16.47 (series A) Class 150
AWWA C207 Class B,D,E
Convoluted Stainless Stainless Steel 3”to63” ASME/ANSI B16.5 Class 150
Steel Flanges ASTM A351CF8M (316) ASME/ANSI B16.1 Class 125
ASME/ANSI B16.47 (series A) Class 150
AWWA C207 Class B,D,E
Steel Plate Group Steel Plate 3”to63” ASME/ANSI B16.5 Class 150
Flanges ASTM A36 ASME/ANSI B16.1 Class 125
ASME/ANSI B16.47 (series A) Class 150
AWWA C207 Class B,D,E
Steel Plate Blind Steel Plate 3”to63” ASME/ANSI B16.5 Class 150
Flanges ASTM A36 ASME/ANSI B16.1 Class 125
ASME/ANSI B16.47 (series A) Class 150
AWWA C207 Class B,D,E
Carbon Steel Blind Carbon Steel 3”to28” ASME/ANSI B16.5 Class 150
Flanges ASTM A105 ASME/ANSI B16.1 Class 125
ASME/ANSI B16.47 (series A) Class 150
AWWA C207 Class D,E

FM Approved Flanges: Refer to FM Approved Section (pages 53 to 55) for FM Approved sizes.

Page 29
Joining Sclairpipe to Sclairpipe
Using Flanged Connections

The tables below detail the bolt length "L"

requirements for a SCLAIRPIPE to SCLAIRPIPE
connection. The below information is based on the
use of heavy hex, SAE J429 bolts and nuts. An
additional allowance of 3 in. of threaded length should
be made to bolt lengths for underwater connections
for ease of assembly.

Bolt Lengths

Nominal Pipe Size 3 4 5 6 7 8 10 12 13 14 16 18 20

Number of Bolts 4 8 8 8 8 8 12 12 12 12 16 16 20
Diameter of Bolts 5/8 5/8 3/4 3/4 3/4 3/4 7/8 7/8 1 1 1 1 1/8 1 1/8
Ductile Iron (DR7) 5.00 5.00 5.25 5.50 6.25 7.00 8.25 9.50 10.00 11.25 11.75
Ductile Iron (DR9)
Ductile Iron (DR11) 8.25 9.50 10.00 11.25 11.75
Ductile Iron (DR17)
L Ductile Iron (DR21)
Steel Plate GRP 1 4.50 4.50 5.00 5.00 5.00 5.50 6.25 7.50 8.50 9.00 9.00 10.00 10.00
Steel Plate GRP 2 5.50 5.50 5.50 6.00 6.50 8.00 9.00 9.50 9.50 10.50 10.50
Steel Plate GRP 3 7.00 8.50 9.50 10.00 10.00 11.00 11.00
Steel Plate GRP 4 10.50 11.50 11.50

Nominal Pipe Size 22 24 26 28 30 32M 36 40M 42 48M 54 55M 63M

Number of Bolts 20 20 24 28 28 28 32 36 36 44 44 44 52
Diameter of Bolts 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 3/4 1 3/4 1 3/4
Ductile Iron (DR7) 12.50 12.50
Ductile Iron (DR9) 14.00 14.00
Ductile Iron (DR11) 12.50 13.50 14.00 15.00
Ductile Iron (DR17) 13.50 15.00 16.50 16.50
L Ductile Iron (DR21) 18.00 19.00
Steel Plate GRP 1 10.50 10.50 12.00 12.00 12.00 12.00 13.00 13.50 14.00 15.00 15.50 16.50 16.00
Steel Plate GRP 2 10.50 11.00 12.00 12.50 12.50 12.50 13.00 13.50 14.00 15.50 16.00 16.50 16.00
Steel Plate GRP 3 11.00 12.00 12.50 13.00 13.00 13.00 13.50 14.00 14.00 16.00 16.50 17.00 17.00
Steel Plate GRP 4 12.00 12.00 13.50 14.00 14.00 14.00 14.50 14.50 14.50 16.50 17.50 17.50 17.50
Notes: These tables are supplied as an estimating guide. Please verify the required length for your installation.

Page 30
Joining Sclairpipe to other materials

Because of the many variations of flange styles and dimensions, it would be beyond the scope of this brochure to
detail all connections. The line drawing and table below show dimension "A" - the combined thickness of a Sclairpipe
stub end and a standard flange. The designer should supply dimension "B" based on the actual flange thickness being
used on the conneting pipe, plus gasket and washer thickness. Then by allowing for the nut and clear thread the bolt
length "L" can be determined. The designer should always ensure that the available thread length is greater than
dimension 'C'.

Flange Assembly

Nominal Pipe Size 3 4 5 6 7 8 10 12 13 14 16 18 20

Number of Bolts 4 8 8 8 8 8 12 12 12 12 16 16 20
Diameter of Bolts 5/8 5/8 3/4 3/4 3/4 3/4 7/8 7/8 1 1 1 1 1/8 1 1/8
Ductile Iron (DR7) 1.93 1.93 1.93 2.06 2.41 2.70 3.35 4.01 4.21 4.66 5.01
Ductile Iron (DR9)
Ductile Iron (DR11) 3.10 3.76 4.01 4.46 4.61
Ductile Iron (DR17)
A Ductile Iron (DR21)
Steel Plate GRP 1 1.73 1.73 1.73 1.81 1.89 2.01 2.25 2.85 3.26 3.61 3.61 4.01 4.01
Steel Plate GRP 2 1.98 2.06 2.14 2.26 2.50 3.10 3.51 3.86 3.86 4.26 4.26
Steel Plate GRP 3 2.75 3.35 3.76 4.11 4.11 4.51 4.51
Steel Plate GRP 4 4.36 4.76 4.76

Nominal Pipe Size 22 24 26 28 30 32M 36 40M 42 48M 54 55M 63M

Number of Bolts 20 20 24 28 28 28 32 36 36 44 44 44 52
Diameter of Bolts 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 3/4 1 3/4 1 3/4
Ductile Iron (DR7) 5.16 5.31
Ductile Iron (DR9) 5.77 5.87
Ductile Iron (DR11) 4.91 5.72 5.82 6.40
Ductile Iron (DR17) 2.30 2.75 3.50 3.25
A Ductile Iron (DR21) 3.65 4.03
Steel Plate GRP 1 4.01 4.26 4.77 4.77 5.02 4.77 5.10 5.29 5.29 6.27 6.58 6.83 6.58
Steel Plate GRP 2 4.26 4.51 5.02 5.27 5.27 5.02 5.35 5.54 5.54 6.52 6.83 7.08 6.83
Steel Plate GRP 3 4.51 4.76 5.27 5.52 5.52 5.27 5.60 5.79 5.79 6.77 7.08 7.33 7.33
Steel Plate GRP 4 4.76 5.01 5.52 5.77 5.77 5.77 6.10 6.04 6.04 7.02 7.58 7.58 7.58
Notes: These tables are supplied as an estimating guide. Please verify the required length for your installation.

Page 31
IPS DUCTILE IRON FLANGE
Specifications:
- Material: Ductile Iron ASTM A536
- Bolting pattern: ASME/ANSI B16.5 CLASS 150
ASME/ANSI B16.1 CLASS 125
ASME/ANSI B16.47 (SERIES A)
CLASS 150
AWWA C207 B,D,E
- Surface finish: Standard red oxide primer, available
epoxy coated or galvanized
Pipe Outside Bolt Diameter of Bolt DR Flange Inside Weight
Diameter Diameter Count Bolt Hole Circle Thickness Diameter lbs/pc
(in) OD N BD BC T ID

3 7.50 8 0.75 6.00 7 0.95 ± 0.05 3.70 ± 0.10 5

4 9.00 8 0.75 7.50 7 0.95 ± 0.05 4.70 ± 0.10 6

6 11.00 8 0.88 9.50 7 1.00 ± 0.05 6.80 ± 0.10 8

8 13.50 8 0.88 11.75 7 1.15 ± 0.05 8.80 ± 0.10 12

10 16.00 12 1.00 14.25 7 1.20 ± 0.05 10.95 ± 0.05 15

7 1.50 ± 0.05 13.00 ± 0.15 24

12 19.00 12 1.00 17.00
11 1.25 ± 0.05 13.15 ± 0.05 22
7 1.65 ± 0.05 14.20 ± 0.05 36
14 21.00 12 1.13 18.75
11 1.40 ± 0.05 14.30 ± 0.15 30
7 1.85 ± 0.05 16.20 ± 0.05 48
16 23.50 16 1.13 21.25
11 1.65 ± 0.05 16.30 ± 0.15 40
7 1.90 ± 0.10 18.30 ± 0.10 50
18 25.00 16 1.25 22.75
11 1.70 ± 0.05 18.35 ± 0.05 42
7 2.25 ± 0.05 20.35 ± 0.05 70
20 27.50 20 1.25 25.00
11 1.85 ± 0.05 20.35 ± 0.05 56

22 29.50 20 1.38 27.25 7 2.40 ± 0.05 22.38 ± 0.05 80

7 2.55 ± 0.05 24.35 ± 0.05 103

24 32.00 20 1.38 29.50
11 2.15 ± 0.05 24.35 ± 0.05 80

26 34.25 24 1.38 31.75 9 2.50 ± 0.05 26.35 ± 0.05 109

28 36.50 28 1.38 34.00 9 2.60 ± 0.05 28.35 ± 0.05 128

11 2.45 ± 0.05 30.35 ± 0.05 140

30 38.75 28 1.38 36.00
17 2.30 ± 0.05 30.35 ± 0.05 118

32 41.75 28 1.63 38.50 11 2.55 ± 0.05 32.35 ± 0.05 165

34 43.75 32 1.63 40.50 11 2.90 ± 0.05 34.40 ± 0.05 191

11 3.05 ± 0.10 36.40 ± 0.05 220

36 46.00 32 1.63 42.75
17 2.75 ± 0.05 36.40 ± 0.05 194

42 53.00 36 1.63 49.50 17 3.25 ± 0.05 42.40 ± 0.05 265

48 59.50 44 1.63 56.00 21 3.65 ± 0.05 48.50 ± 0.05 354

54 66.25 44 1.88 62.75 21 4.05 ± 0.05 54.60 ± 0.05 519

63 Available upon request

Page 32
 IPS STAINLESS STEEL FLANGE
Specifications:
- Material: Stainless Steel
ASTM A351CF8M (316)
- Bolting pattern: ASME/ANSI B16.5 CLASS 150
ASME/ANSI B16.1 CLASS 125
ASME/ANSI B16.47 (SERIES A)
CLASS 150
AWWA C207 B,D,E

Pipe Outside Bolt Diameter of Bolt DR Flange Inside Weight

Diameter Diameter Count Bolt Hole Circle Thickness Diameter lbs/pc
(inch) OD N D BC T ID
3 7.50 4 0.75 6.00 7 0.95 ± 0.05 3.70 ± 0.10 5
4 9.00 8 0.75 7.50 7 0.95 ± 0.05 4.70 ± 0.10 6
6 11.00 8 0.88 9.50 7 1.00 ± 0.05 6.80 ± 0.10 9
8 13.50 8 0.88 11.75 7 1.15 ± 0.05 8.80 ± 0.10 12
10 16.00 12 1.00 14.25 7 1.20 ± 0.05 10.95 ± 0.10 16
12 19.00 12 1.00 17.00 7 1.50 ± 0.05 13.00 ± 0.15 23
14 21.00 12 1.13 18.75 11 1.40 ± 0.05 14.25 ± 0.15 30
16 23.50 16 1.13 21.25 11 1.65 ± 0.05 16.25 ± 0.15 40
18 25.00 16 1.25 22.75 11 1.70 ± 0.05 18.30 ± 0.15 57
20 27.50 20 1.25 25.00 11 1.84 ± 0.05 20.35 ± 0.15 75
22 29.50 20 1.38 27.25 7 2.40 ± 0.05 22.30 ± 0.15 106
24 32.00 20 1.38 29.50 11 2.15 ± 0.05 24.35 ± 0.15 111
26 34.25 24 1.38 31.75 9 2.50 ± 0.05 26.35 ± 0.15 119
28 36.50 28 1.38 34.00 9 2.60 ± 0.05 28.35 ± 0.15 130
30 38.75 28 1.38 36.00 11 2.45 ± 0.05 30.35 ± 0.15 156
32 41.75 28 1.63 38.50 11 2.55 ± 0.05 32.35 ± 0.15 179
34 43.75 32 1.63 40.50 11 2.90 ± 0.05 34.35 ± 0.15 199
36 46.00 32 1.63 42.75 17 2.85 ± 0.15 36.35 ± 0.15 230
42 53.00 36 1.63 49.50 17 3.25 ± 0.15 42.35 ± 0.15 330
48 59.50 44 1.63 56.00 21 3.65 ± 0.15 48.50 ± 0.15 420
54 66.25 44 1.88 62.75 21 4.05 ± 0.15 54.60 ± 0.15 536
63 Available upon request

Page 33
 IPS STEEL PLATE GROUP FLANGE

Specifications:
- Material: Steel Plate, ASTM A36
- Bolting pattern: ASME/ANSI B16.5 CLASS 150
ASME/ANSI B16.1 CLASS 125
ASME/ANSI B16.47 (SERIES A) CLASS 150
AWWA C207 B,D,E
- Surface finish: Standard red oxide primer, available epoxy coated or galvanized

Group 1 Group 2
Bolt Bolt Bolt Plate Plate
NPS OD ID Press. Press.
Count Hole Dia Circle Thick Wgt Thick Wgt
(in) (in) (in) Rating Rating
N BD BC T (lbs) T (lbs)
(psi) (psi)
(in) (in)
3 7.50 4.00 4 0.75 6.00 0.75 300 6 - - -
4 9.00 4.75 8 0.75 7.50 0.75 300 9 - - -
6 11.00 7.00 8 0.88 9.50 0.75 200 11 1.00 300 15
8 13.50 9.00 8 0.88 11.75 0.75 160 16 1.00 300 21
10 16.00 11.38 12 1.00 14.25 0.75 110 19 1.00 200 26
12 19.00 13.13 12 1.00 17.00 1.00 128 39 1.25 200 49
14 21.00 14.38 12 1.13 18.75 1.25 128 61 1.50 254 73
16 23.50 16.38 16 1.13 21.25 1.25 128 74 1.50 200 88
18 25.00 18.38 16 1.25 22.75 1.25 128 73 1.50 160 88
20 27.50 20.38 20 1.25 25.00 1.25 100 86 1.50 128 104
22 29.50 22.67 20 1.38 27.25 1.25 80 89 1.50 128 106
24 32.00 24.38 20 1.38 29.50 1.50 80 131 1.75 128 153
26 34.25 26.38 24 1.38 31.75 1.50 80 142 1.75 128 166
28 36.50 28.58 28 1.38 34.00 1.50 80 155 2.00 128 206
30 38.75 30.38 28 1.38 36.00 1.75 80 205 2.00 128 234
32M 41.75 32.38 28 1.63 38.50 1.50 64 208 1.75 80 242
36 46.00 36.38 32 1.63 42.75 1.75 64 276 2.00 80 316
40M 50.75 40.00 36 1.63 42.75 1.75 50 343 2.00 64 392
42 53.00 42.38 36 1.63 49.50 1.75 50 358 2.00 64 409
48M 59.50 47.88 44 1.63 56.00 2.25 50 598 2.50 64 664
54 66.25 54.38 44 1.88 62.75 2.25 50 676 2.50 64 751
55M 66.25 55.75 44 1.88 62.75 2.50 50 667 2.75 64 734
63 73.00 64.00 52 1.88 69.25 2.25 50 568 2.50 64 632

Page 34
 IPS STEEL PLATE GROUP FLANGE

Specifications:
- Material: Steel Plate, ASTM A36
- Bolting pattern: ASME/ANSI B16.5 CLASS 150
ASME/ANSI B16.1 CLASS 125
ASME/ANSI B16.47 (SERIES A) CLASS 150
AWWA C207 B,D,E
- Surface finish: Standard red oxide primer, available epoxy coated or galvanized

1
Group 3 2
Group 4
Bolt Bolt Bolt Plate Plate
NPS OD ID Press. Press.
Count Hole Dia Circle Thick Wgt Thick Wgt
(in) (in) (in) Rating Rating
N BD BC T (lbs) T (lbs)
(psi) (psi)
(in) (in)
3 7.50 4.00 4 0.75 6.00 - - - - - -
4 9.00 4.75 8 0.75 7.50 - - - - - -
6 11.00 7.00 8 0.88 9.50 - - - - - -
8 13.50 9.00 8 0.88 11.75 - - - - - -
10 16.00 11.38 12 1.00 14.25 1.25 300 32 - - -
12 19.00 13.13 12 1.00 17.00 1.50 300 59 - - -
14 21.00 14.38 12 1.13 18.75 1.75 300 85 - - -
16 23.50 16.38 16 1.13 21.25 1.75 254 103 2.00 300 118
18 25.00 18.38 16 1.25 22.75 1.75 200 102 2.00 254 117
20 27.50 20.38 20 1.25 25.00 1.75 200 121 2.00 254 138
22 29.50 22.67 20 1.38 27.25 1.75 160 124 2.00 200 142
24 32.00 24.38 20 1.38 29.50 2.00 160 175 2.25 200 197
26 34.25 26.38 24 1.38 31.75 2.00 160 189 2.25 200 213
28 36.50 28.58 28 1.38 34.00 2.25 160 232 2.50 200 258
30 38.75 30.38 28 1.38 36.00 2.25 160 264 2.50 200 293
32M 41.75 32.38 28 1.63 38.50 2.00 110 277 2.50 160 346
36 46.00 36.38 32 1.63 42.75 2.25 100 355 2.75 160 434
40M 50.75 40.00 36 1.63 42.75 2.25 80 441 2.50 100 490
42 53.00 42.38 36 1.63 49.50 2.25 80 460 2.50 100 511
48M 59.50 47.88 44 1.63 56.00 2.75 80 730 3.00 100 797
54 66.25 54.38 44 1.88 62.75 2.75 80 826 3.25 100 977
55M 66.25 55.75 44 1.88 62.75 3.00 80 800 3.25 100 867
63 73.00 64.00 52 1.88 69.25 3.00 80 758 3.25 100 867

Page 35
IPS STEEL PLATE BLIND FLANGE

Specifications:
- Material: Steel Plate, ASTM A36
- Bolting pattern: ASME/ANSI B16.5 CLASS 150
ASME/ANSI B16.1 CLASS 125
ASME/ANSI B16.47 (SERIES A) CLASS 150
AWWA C207 B,D,E
- Surface finish: Standard red oxide primer, available epoxy coated or galvanized

NPS OD Bolt Count Bolt Hole Dia Bolt Circle Plate Thick Press. Rating Wgt
(in) (in) N BD BC T (psi) (lbs)
(in)
3 7.50 4 0.75 6.00 0.75 300 9
4 9.00 8 0.75 7.50 0.75 300 13
6 11.00 8 0.88 9.50 1.00 300 26
8 13.50 8 0.88 11.75 1.00 300 39
10 16.00 12 1.00 14.25 1.25 300 68
12 19.00 12 1.00 17.00 1.50 300 117
14 21.00 12 1.13 18.75 1.75 300 166
16 23.50 16 1.13 21.25 2.00 300 237
18 25.00 16 1.25 22.75 2.00 254 267
20 27.50 20 1.25 25.00 2.00 254 323
22 29.50 20 1.38 27.25 2.00 200 371
24 32.00 20 1.38 29.50 2.25 200 494
26 34.25 24 1.38 31.75 2.25 200 561
28 36.50 28 1.38 34.00 2.50 200 712
30 38.75 28 1.38 36.00 2.50 200 807
32M 41.75 28 1.63 38.50 2.50 160 929
36 46.00 32 1.63 42.75 2.75 160 1244
40M 50.75 36 1.63 42.75 2.50 100 1105
42 53.00 36 1.63 49.50 2.50 100 1511
48M 59.50 44 1.63 56.00 3.00 100 2288
54 66.25 44 1.88 62.75 3.25 100 3117
55M 66.25 44 1.88 62.75 3.25 100 3117
63 73.00 52 1.88 69.25 3.00 80 3495

Page 36
FM Approved Sclairpipe Fittings

KWH Pipe offers the largest size range of Factory Mutual Approved fabricated fittings for us in Fire
Pr
otect
ionPi pelinesi nNor thAmer i
ca.Si zesr angeindi amet erfr
om 4”upt o28” .

As a laboratory that offers approval services in the interest of property conservation, the Factory Mutual
Research Corporation has a reputation for excellence and integrity worldwide. The Factory Mutual
Research Corporation is an internationally recognized test laboratory for components of fire protection
systems. FM Approval is only issued after a product or service has been proven to meet specific
requirements of performance, safety and quality. Manufacturing facilities are also routinely re-inspected
to ensure continuing compliance with Factory Mutual Standards.

The equipment, materials and services listed in the following pages are FM Approved. In every case,
these products and services have been subjected to examinations and inspections and have been found
to satisfy the criteria for Approval. Generally unauthorized alterations or modifications may impact the
safety and performance of the product and will void the approval. Therefore any dimensional change for
any style and type of fitting has to be submitted to FM for approval.

All KWH FM Approved pipe and fittings bear the mark:

All fabricated fittings can be supplied with either flanged or plain ends to be connected to the piping
system. FM Approved pipe and fittings may be directly connected together by butt fusion or by
mechanical FM Approved connections. FM Approved pipe and fittings may also be joined to other FM
Approved steel flanged pipe and fittings.

Page 37
FM IPS 11.25 DEG ELBOW - 2 SEGMENT

Dimensions (in)
OD avg Weight
NPS Part Description FM Class
(in) R S C (lbs)

4IPS 11.25EL2S FM-CL200 BF 200 3

4 4.50 27.6 5.2 5.0
4IPS 11.25EL2S FM-CL150 BF 150 2
6IPS 11.25EL2S FM-CL200 BF 200 7
6 6.63 28.7 5.3 5.0
6IPS 11.25EL2S FM-CL150 BF 150 6
8IPS 11.25EL2S FM-CL200 BF 200 14
8 8.63 34.8 6.4 6.0
8IPS 11.25EL2S FM-CL150 BF 150 11
10IPS 11.25EL2S FM-CL200 BF 200 23
10 10.75 38.4 7.0 6.5
10IPS 11.25EL2S FM-CL150 BF 150 20
12IPS 11.25EL2S FM-CL200 BF 200 40
12 12.75 47.0 8.6 8.0
12IPS 11.25EL2S FM-CL150 BF 150 34
14IPS 11.25EL2S FM-CL200 BF 200 52
14 14.00 50.2 9.2 8.5
14IPS 11.25EL2S FM-CL150 BF 150 44
16IPS 11.25EL2S FM-CL200 BF 200 69
16 16.00 51.2 9.3 8.5
16IPS 11.25EL2S FM-CL150 BF 150 58
18IPS 11.25EL2S FM-CL200 BF 200 94
18 18.00 54.7 9.9 9.0
18IPS 11.25EL2S FM-CL150 BF 150 78
20IPS 11.25EL2S FM-CL200 BF 200 118
20 20.00 55.7 10.0 9.0
20IPS 11.25EL2S FM-CL150 BF 150 99
22IPS 11.25EL2S FM-CL200 BF 200 171
22 22.00 66.8 12.1 11.0
22IPS 11.25EL2S FM-CL150 BF 150 143
24IPS 11.25EL2S FM-CL200 BF 200 207
24 24.00 67.8 12.2 11.0
24IPS 11.25EL2S FM-CL150 BF 150 173
26IPS 11.25EL2S FM-CL200 BF 200 246
26 26.00 68.8 12.3 11.0
26IPS 11.25EL2S FM-CL150 BF 150 206
28 28.00 69.8 12.4 11.0 28IPS 11.25EL2S FM-CL150 BF 150 242

Page 38
FM IPS 22.5 DEG ELBOW - 2 SEGMENT

Dimensions (in)
OD avg Weight
NPS Part Description FM Class
(in) R S C (lbs)

4IPS 22.5EL2S FM-CL200 BF 200 3

4 4.50 14.8 5.5 5.0
4IPS 22.5EL2S FM-CL150 BF 150 3
6IPS 22.5EL2S FM-CL200 BF 200 7
6 6.63 15.9 5.7 5.0
6IPS 22.5EL2S FM-CL150 BF 150 6
8IPS 22.5EL2S FM-CL200 BF 200 15
8 8.63 19.4 6.9 6.0
8IPS 22.5EL2S FM-CL150 BF 150 13
10IPS 22.5EL2S FM-CL200 BF 200 27
10 10.75 21.7 7.6 6.5
10IPS 22.5EL2S FM-CL150 BF 150 22
12IPS 22.5EL2S FM-CL200 BF 200 46
12 12.75 26.5 9.3 8.0
12IPS 22.5EL2S FM-CL150 BF 150 38
14IPS 22.5EL2S FM-CL200 BF 200 59
14 14.00 28.4 9.9 8.5
14IPS 22.5EL2S FM-CL150 BF 150 50
16IPS 22.5EL2S FM-CL200 BF 200 80
16 16.00 29.4 10.1 8.5
16IPS 22.5EL2S FM-CL150 BF 150 67
18IPS 22.5EL2S FM-CL200 BF 200 110
18 18.00 31.6 10.8 9.0
18IPS 22.5EL2S FM-CL150 BF 150 92
20IPS 22.5EL2S FM-CL200 BF 200 140
20 20.00 32.6 11.0 9.0
20IPS 22.5EL2S FM-CL150 BF 150 117
22IPS 22.5EL2S FM-CL200 BF 200 200
22 22.00 38.7 13.2 11.0
22IPS 22.5EL2S FM-CL150 BF 150 168
24IPS 22.5EL2S FM-CL200 BF 200 244
24 24.00 39.7 13.4 11.0
24IPS 22.5EL2S FM-CL150 BF 150 205
26IPS 22.5EL2S FM-CL200 BF 200 293
26 26.00 40.7 13.6 11.0
26IPS 22.5EL2S FM-CL150 BF 150 246
28 28.00 41.7 13.8 11.0 28IPS 22.5EL2S FM-CL150 BF 150 293

Page 39
FM IPS 30 DEG ELBOW - 2 SEGMENT

Dimensions (in)
OD avg Weight
NPS Part Description FM Class
(in) R S C (lbs)

4IPS 30EL2S FM-CL200 BF 200 3

4 4.50 11.6 5.6 5.0
4IPS 30EL2S FM-CL150 BF 150 3
6IPS 30EL2S FM-CL200 BF 200 8
6 6.63 12.6 5.9 5.0
6IPS 30EL2S FM-CL150 BF 150 7
8IPS 30EL2S FM-CL200 BF 200 17
8 8.63 15.5 7.2 6.0
8IPS 30EL2S FM-CL150 BF 150 14
10IPS 30EL2S FM-CL200 BF 200 29
10 10.75 17.5 7.9 6.5
10IPS 30EL2S FM-CL150 BF 150 24
12IPS 30EL2S FM-CL200 BF 200 50
12 12.75 21.3 9.7 8.0
12IPS 30EL2S FM-CL150 BF 150 42
14IPS 30EL2S FM-CL200 BF 200 65
14 14.00 22.9 10.4 8.5
14IPS 30EL2S FM-CL150 BF 150 54
16IPS 30EL2S FM-CL200 BF 200 88
16 16.00 23.9 10.6 8.5
16IPS 30EL2S FM-CL150 BF 150 74
18IPS 30EL2S FM-CL200 BF 200 120
18 18.00 25.8 11.4 9.0
18IPS 30EL2S FM-CL150 BF 150 101
20IPS 30EL2S FM-CL200 BF 200 155
20 20.00 26.8 11.7 9.0
20IPS 30EL2S FM-CL150 BF 150 129
22IPS 30EL2S FM-CL200 BF 200 220
22 22.00 31.5 13.9 11.0
22IPS 30EL2S FM-CL150 BF 150 184
24IPS 30EL2S FM-CL200 BF 200 269
24 24.00 32.5 14.2 11.0
24IPS 30EL2S FM-CL150 BF 150 225
26IPS 30EL2S FM-CL200 BF 200 326
26 26.00 33.5 14.5 11.0
26IPS 30EL2S FM-CL150 BF 150 274
28 28.00 34.5 14.8 11.0 28IPS 30EL2S FM-CL150 BF 150 326

Page 40
FM IPS 45 DEG ELBOW - 3 SEGMENT

Dimensions (in)
OD avg. Weight
NPS Part Description FM Class
(in) R S C (lbs)

4IPS 45EL3S FM-CL200 BF 200 5

4 4.50 14.8 8.6 5.0
4IPS 45EL3S FM-CL150 BF 150 4
6IPS 45EL3S FM-CL200 BF 200 12
6 6.63 15.9 9.1 5.0
6IPS 45EL3S FM-CL150 BF 150 10
8IPS 45EL3S FM-CL200 BF 200 25
8 8.63 19.4 11.0 6.0
8IPS 45EL3S FM-CL150 BF 150 21
10IPS 45EL3S FM-CL200 BF 200 43
10 10.75 21.7 12.2 6.5
10IPS 45EL3S FM-CL150 BF 150 36
12IPS 45EL3S FM-CL200 BF 200 74
12 12.75 26.5 15.0 8.0
12IPS 45EL3S FM-CL150 BF 150 62
14IPS 45EL3S FM-CL200 BF 200 97
14 14.00 28.4 16.0 8.5
14IPS 45EL3S FM-CL150 BF 150 81
16IPS 45EL3S FM-CL200 BF 200 132
16 16.00 29.4 16.4 8.5
16IPS 45EL3S FM-CL150 BF 150 110
18IPS 45EL3S FM-CL200 BF 200 180
18 18.00 31.6 17.6 9.0
18IPS 45EL3S FM-CL150 BF 150 151
20IPS 45EL3S FM-CL200 BF 200 231
20 20.00 32.6 18.0 9.0
20IPS 45EL3S FM-CL150 BF 150 193
22IPS 45EL3S FM-CL200 BF 200 329
22 22.00 38.7 21.5 11.0
22IPS 45EL3S FM-CL150 BF 150 275
24IPS 45EL3S FM-CL200 BF 200 403
24 24.00 39.7 21.9 11.0
24IPS 45EL3S FM-CL150 BF 150 337
26IPS 45EL3S FM-CL200 BF 200 487
26 26.00 40.7 22.3 11.0
26IPS 45EL3S FM-CL150 BF 150 408
28 28.00 41.7 22.8 11.0 28IPS 45EL3S FM-CL150 BF 150 487

Page 41
FM IPS 60 DEG ELBOW - 3 SEGMENT

Dimensions
Weight
NPS OD avg. Part Description FM Class
R S C (lbs)

4IPS 60EL3S FM-CL200 BF 200 5

4 4.50 11.6 9.2 5.0
4IPS 60EL3S FM-CL150 BF 150 5
6IPS 60EL3S FM-CL200 BF 200 13
6 6.63 12.6 9.8 5.0
6IPS 60EL3S FM-CL150 BF 150 11
8IPS 60EL3S FM-CL200 BF 200 27
8 8.63 15.5 12.0 6.0
8IPS 60EL3S FM-CL150 BF 150 23
10IPS 60EL3S FM-CL200 BF 200 48
10 10.75 17.5 13.4 6.5
10IPS 60EL3S FM-CL150 BF 150 40
12IPS 60EL3S FM-CL200 BF 200 82
12 12.75 21.3 16.3 8.0
12IPS 60EL3S FM-CL150 BF 150 69
14IPS 60EL3S FM-CL200 BF 200 107
14 14.00 22.9 17.4 8.5
14IPS 60EL3S FM-CL150 BF 150 89
16IPS 60EL3S FM-CL200 BF 200 147
16 16.00 23.9 18.0 8.5
16IPS 60EL3S FM-CL150 BF 150 123
18IPS 60EL3S FM-CL200 BF 200 201
18 18.00 25.8 19.4 9.0
18IPS 60EL3S FM-CL150 BF 150 168
20IPS 60EL3S FM-CL200 BF 200 260
20 20.00 26.8 20.0 9.0
20IPS 60EL3S FM-CL150 BF 150 218
22IPS 60EL3S FM-CL200 BF 200 368
22 22.00 31.5 23.7 11.0
22IPS 60EL3S FM-CL150 BF 150 308
24IPS 60EL3S FM-CL200 BF 200 454
24 24.00 32.5 24.3 11.0
24IPS 60EL3S FM-CL150 BF 150 380
26IPS 60EL3S FM-CL200 BF 200 552
26 26.00 33.5 24.9 11.0
26IPS 60EL3S FM-CL150 BF 150 463
28 28.00 34.5 25.4 11.0 28IPS 60EL3S FM-CL150 BF 150 555

Page 42
FM IPS 90 DEG ELBOW - 4 SEGMENT

Dimensions (in)
OD avg. Weight
NPS Part Description FM Class
(in) R S C (lbs)

4IPS 90EL4S FM-CL200 BF 200 7

4 4.50 11.6 14.1 5.0
4IPS 90EL4S FM-CL150 BF 150 6
6IPS 90EL4S FM-CL200 BF 200 18
6 6.63 12.6 15.1 5.0
6IPS 90EL4S FM-CL150 BF 150 15
8IPS 90EL4S FM-CL200 BF 200 38
8 8.63 15.5 18.5 6.0
8IPS 90EL4S FM-CL150 BF 150 32
10IPS 90EL4S FM-CL200 BF 200 67
10 10.75 17.5 20.8 6.5
10IPS 90EL4S FM-CL150 BF 150 56
12IPS 90EL4S FM-CL200 BF 200 114
12 12.75 21.3 25.3 8.0
12IPS 90EL4S FM-CL150 BF 150 96
14IPS 90EL4S FM-CL200 BF 200 149
14 14.00 22.9 27.1 8.5
14IPS 90EL4S FM-CL150 BF 150 125
16IPS 90EL4S FM-CL200 BF 200 206
16 16.00 23.9 28.1 8.5
16IPS 90EL4S FM-CL150 BF 150 172
18IPS 90EL4S FM-CL200 BF 200 282
18 18.00 25.8 30.3 9.0
18IPS 90EL4S FM-CL150 BF 150 236
20IPS 90EL4S FM-CL200 BF 200 366
20 20.00 26.8 31.3 9.0
20IPS 90EL4S FM-CL150 BF 150 307
22IPS 90EL4S FM-CL200 BF 200 516
22 22.00 31.5 37.0 11.0
22IPS 90EL4S FM-CL150 BF 150 432
24IPS 90EL4S FM-CL200 BF 200 639
24 24.00 32.5 38.0 11.0
24IPS 90EL4S FM-CL150 BF 150 535
26IPS 90EL4S FM-CL200 BF 200 779
26 26.00 33.5 39.0 11.0
26IPS 90EL4S FM-CL150 BF 150 652
28 28.00 34.5 40.0 11.0 28IPS 90EL4S FM-CL150 BF 150 784

Page 43
FM IPS 90 DEG ELBOW - 5 SEGMENT

Dimensions (in)
OD avg. Weight
NPS Part Description FM Class
(in) R S C (lbs)

4IPS 90EL5S FM-CL200 BF 200 9

4 4.50 14.8 17.3 5.0
4IPS 90EL5S FM-CL150 BF 150 7
6IPS 90EL5S FM-CL200 BF 200 21
6 6.63 15.9 18.4 5.0
6IPS 90EL5S FM-CL150 BF 150 18
8IPS 90EL5S FM-CL200 BF 200 44
8 8.63 19.4 22.4 6.0
8IPS 90EL5S FM-CL150 BF 150 37
10IPS 90EL5S FM-CL200 BF 200 77
10 10.75 21.7 25.0 6.5
10IPS 90EL5S FM-CL150 BF 150 64
12IPS 90EL5S FM-CL200 BF 200 132
12 12.75 26.5 30.5 8.0
12IPS 90EL5S FM-CL150 BF 150 110
14IPS 90EL5S FM-CL200 BF 200 170
14 14.00 28.4 32.6 8.5
14IPS 90EL5S FM-CL150 BF 150 143
16IPS 90EL5S FM-CL200 BF 200 234
16 16.00 29.4 33.6 8.5
16IPS 90EL5S FM-CL150 BF 150 196
18IPS 90EL5S FM-CL200 BF 200 320
18 18.00 31.6 36.1 9.0
18IPS 90EL5S FM-CL150 BF 150 268
20IPS 90EL5S FM-CL200 BF 200 413
20 20.00 32.6 37.1 9.0
20IPS 90EL5S FM-CL150 BF 150 345
22IPS 90EL5S FM-CL200 BF 200 585
22 22.00 38.7 44.2 11.0
22IPS 90EL5S FM-CL150 BF 150 490
24IPS 90EL5S FM-CL200 BF 200 721
24 24.00 39.7 45.2 11.0
24IPS 90EL5S FM-CL150 BF 150 603
26IPS 90EL5S FM-CL200 BF 200 874
26 26.00 40.7 46.2 11.0
26IPS 90EL5S FM-CL150 BF 150 732
28 28.00 41.7 47.2 11.0 28IPS 90EL5S FM-CL150 BF 150 877

Page 44
FM IPS STRAIGHT TEE

Dimensions (in)
Weight
NPS OD avg. Part Description FM Class
S V (lbs)

4IPS TEE FM-CL200 BF 200 7

4 4.50 16.5 6.0
4IPS TEE FM-CL150 BF 150 6
6IPS TEE FM-CL200 BF 200 16
6 6.63 18.6 6.0
6IPS TEE FM-CL150 BF 150 15
8IPS TEE FM-CL200 BF 200 37
8 8.63 24.6 8.0
8IPS TEE FM-CL150 BF 150 33
10IPS TEE FM-CL200 BF 200 61
10 10.75 26.8 8.0
10IPS TEE FM-CL150 BF 150 54
12IPS TEE FM-CL200 BF 200 90
12 12.75 28.8 8.0
12IPS TEE FM-CL150 BF 150 80
14IPS TEE FM-CL200 BF 200 122
14 14.00 32.0 9.0
14IPS TEE FM-CL150 BF 150 108
16IPS TEE FM-CL200 BF 200 167
16 16.00 34.0 9.0
16IPS TEE FM-CL150 BF 150 148
18IPS TEE FM-CL200 BF 200 235
18 18.00 38.0 10.0
18IPS TEE FM-CL150 BF 150 209
20IPS TEE FM-CL200 BF 200 303
20 20.00 40.0 10.0
20IPS TEE FM-CL150 BF 150 269
22 22.00 62.0 20.0 22IPS TEE FM-CL150 BF 150 533
24 24.00 64.0 20.0 24IPS TEE FM-CL150 BF 150 650
26 26.00 54.0 14.0 26IPS TEE FM-CL150 BF 150 617
28 28.00 56.0 14.0 28IPS TEE FM-CL150 BF 150 737

Page 45
FM IPS SIDEWALL TEE

Outlet Dimensions (in) Weight

Main NPS Part Description FM Class
NPS B A D (lbs)

4" Outlet
8IPS X4 SW-TEE FM-CL200 BF 200 19
8 4 6.0 17.0 8.5
8IPS X4 SW-TEE FM-CL150 BF 150 16
10IPS X4 SW-TEE FM-CL200 BF 200 30
10 4 6.0 18.0 9.0
10IPS X4 SW-TEE FM-CL150 BF 150 25
12IPS X4 SW-TEE FM-CL200 BF 200 48
12 4 6.0 21.0 10.5
12IPS X4 SW-TEE FM-CL150 BF 150 40
14IPS X4 SW-TEE FM-CL200 BF 200 62
14 4 6.0 22.0 11.0
14IPS X4 SW-TEE FM-CL150 BF 150 52
16IPS X4 SW-TEE FM-CL200 BF 200 78
16 4 6.0 22.0 11.0
16IPS X4 SW-TEE FM-CL150 BF 150 65
18IPS X4 SW-TEE FM-CL200 BF 200 102
18 4 6.0 23.0 11.5
18IPS X4 SW-TEE FM-CL150 BF 150 85
20IPS X4 SW-TEE FM-CL200 BF 200 125
20 4 6.0 23.0 11.5
20IPS X4 SW-TEE FM-CL150 BF 150 105
22IPS X4 SW-TEE FM-CL200 BF 200 177
22 4 6.0 27.0 13.5
22IPS X4 SW-TEE FM-CL150 BF 150 149
24IPS X4 SW-TEE FM-CL200 BF 200 211
24 4 6.0 27.0 13.5
24IPS X4 SW-TEE FM-CL150 BF 150 176
26IPS X4 SW-TEE FM-CL200 BF 200 249
26 4 6.0 27.0 13.5
26IPS X4 SW-TEE FM-CL150 BF 150 207
28 4 6.0 27.0 13.5 28IPS X4 SW-TEE FM-CL150 BF 150 240
6" Outlet
10IPS X6 SW-TEE FM-CL200 BF 200 38
10 6 8.0 20.0 10.0
10IPS X6 SW-TEE FM-CL150 BF 150 32
12IPS X6 SW-TEE FM-CL200 BF 200 57
12 6 8.0 23.0 11.5
12IPS X6 SW-TEE FM-CL150 BF 150 48
14IPS X6 SW-TEE FM-CL200 BF 200 70
14 6 8.0 24.0 12.0
14IPS X6 SW-TEE FM-CL150 BF 150 58
16IPS X6 SW-TEE FM-CL200 BF 200 89
16 6 8.0 24.0 12.0
16IPS X6 SW-TEE FM-CL150 BF 150 75
18IPS X6 SW-TEE FM-CL200 BF 200 115
18 6 8.0 25.0 12.5
18IPS X6 SW-TEE FM-CL150 BF 150 97
20IPS X6 SW-TEE FM-CL200 BF 200 141
20 6 8.0 25.0 12.5
20IPS X6 SW-TEE FM-CL150 BF 150 118
22IPS X6 SW-TEE FM-CL200 BF 200 195
22 6 8.0 29.0 14.5
22IPS X6 SW-TEE FM-CL150 BF 150 163
24IPS X6 SW-TEE FM-CL200 BF 200 231
24 6 8.0 29.0 14.5
24IPS X6 SW-TEE FM-CL150 BF 150 193
26IPS X6 SW-TEE FM-CL200 BF 200 272
26 6 8.0 29.0 14.5
26IPS X6 SW-TEE FM-CL150 BF 150 226
28 6 8.0 29.0 14.5 28IPS X6 SW-TEE FM-CL150 BF 150 261

Page 46
FM IPS SIDEWALL TEE

Outlet Dimensions (in) Weight

Main NPS Part Description FM Class
NPS B A D (lbs)

8" Outlet
12IPS X8 SW-TEE FM-CL200 BF 200 67
12 8 8.3 25.0 12.5
12IPS X8 SW-TEE FM-CL150 BF 150 56
14IPS X8 SW-TEE FM-CL200 BF 200 81
14 8 8.3 26.0 13.0
14IPS X8 SW-TEE FM-CL150 BF 150 67
16IPS X8 SW-TEE FM-CL200 BF 200 102
16 8 8.3 26.0 13.0
16IPS X8 SW-TEE FM-CL150 BF 150 85
18IPS X8 SW-TEE FM-CL200 BF 200 130
18 8 8.3 27.0 13.5
18IPS X8 SW-TEE FM-CL150 BF 150 109
20IPS X8 SW-TEE FM-CL200 BF 200 157
20 8 8.3 27.0 13.5
20IPS X8 SW-TEE FM-CL150 BF 150 132
22IPS X8 SW-TEE FM-CL200 BF 200 214
22 8 8.3 31.0 15.5
22IPS X8 SW-TEE FM-CL150 BF 150 179
24IPS X8 SW-TEE FM-CL200 BF 200 252
24 8 8.3 31.0 15.5
24IPS X8 SW-TEE FM-CL150 BF 150 211
26IPS X8 SW-TEE FM-CL200 BF 200 256
26 8 8.3 31.0 15.5
26IPS X8 SW-TEE FM-CL150 BF 150 246
28 8 8.3 31.0 15.5 28IPS X8 SW-TEE FM-CL150 BF 150 283
10" Outlet
16IPS X10 SW-TEE FM-CL200 BF 200 113
16 10 6.5 28.0 14.0
16IPS X10 SW-TEE FM-CL150 BF 150 94
18IPS X10 SW-TEE FM-CL200 BF 200 142
18 10 6.5 29.0 14.5
18IPS X10 SW-TEE FM-CL150 BF 150 119
20IPS X10 SW-TEE FM-CL200 BF 200 172
20 10 6.5 29.0 14.5
20IPS X10 SW-TEE FM-CL150 BF 150 144
22IPS X10 SW-TEE FM-CL200 BF 200 231
22 10 6.5 33.0 16.5
22IPS X10 SW-TEE FM-CL150 BF 150 193
24IPS X10 SW-TEE FM-CL200 BF 200 271
24 10 6.5 33.0 16.5
24IPS X10 SW-TEE FM-CL150 BF 150 227
26IPS X10 SW-TEE FM-CL200 BF 200 319
26 10 6.5 33.0 16.5
26IPS X10 SW-TEE FM-CL150 BF 150 265
28 10 6.5 33.0 16.5 28IPS X10 SW-TEE FM-CL150 BF 150 305
12" Outlet
20IPS X12 SW-TEE FM-CL200 BF 200 193
20 12 8.5 31.0 15.5
20IPS X12 SW-TEE FM-CL150 BF 150 162
22IPS X12 SW-TEE FM-CL200 BF 200 254
22 12 8.5 35.0 17.5
22IPS X12 SW-TEE FM-CL150 BF 150 213
24IPS X12 SW-TEE FM-CL200 BF 200 297
24 12 8.5 35.0 17.5
24IPS X12 SW-TEE FM-CL150 BF 150 249
26IPS X12 SW-TEE FM-CL200 BF 200 347
26 12 8.5 35.0 17.5
26IPS X12 SW-TEE FM-CL150 BF 150 288
28 12 8.5 35.0 17.5 28IPS X12 SW-TEE FM-CL150 BF 150 331

Page 47
FM IPS REDUCING TEE

Dimensions (in)
Weight
NPS Part Description FM Class
S V T (lbs)

8IPS X6 TEE FM-CL200 BF 200 46

8X6 24.6 12.3 16
8IPS X6 TEE FM-CL150 BF 150 41
10IPS X8 TEE FM-CL200 BF 200 78
10X8 26.8 13.4 18
10IPS X8 TEE FM-CL150 BF 150 69
12IPS X10 TEE FM-CL200 BF 200 113
12X10 28.8 14.4 20
12IPS X10 TEE FM-CL150 BF 150 101
14IPS X10 TEE FM-CL200 BF 200 154
14X10 32.0 16.0 23
14IPS X10 TEE FM-CL150 BF 150 136
14IPS X12 TEE FM-CL200 BF 200 155
14X12 32.0 16.0 23
14IPS X12 TEE FM-CL150 BF 150 138
16IPS X14 TEE FM-CL200 BF 200 209
16X14 34.0 17.0 23
16IPS X14 TEE FM-CL150 BF 150 161
16IPS X12 TEE FM-CL200 BF 200 210
16X12 34.0 17.0 23
16IPS X12 TEE FM-CL150 BF 150 187
18IPS X16 TEE FM-CL200 BF 200 288
18X16 38.0 19.0 24
18IPS X16 TEE FM-CL150 BF 150 255
18IPS X16X14 TEE FM-CL200 BF 200 330
18X16X14 38.0 19.0 38*
18IPS X16X14 TEE FM-CL150 BF 150 292
18IPS X16X12 TEE FM-CL200 BF 200 331
18X16X12 38.0 19.0 38*
18IPS X16X12 TEE FM-CL150 BF 150 294
20IPS X18 TEE FM-CL200 BF 200 368
20X18 40.0 20.0 24
20IPS X18 TEE FM-CL200 BF 150 326
20IPS X18X16 TEE FM-CL200 BF 200 421
20X18X16 40.0 20.0 38*
20IPS X18X16 TEE FM-CL150 BF 150 372
22X20 62.0 31.0 36 22IPS X20 TEE FM-CL150 BF 150 611
22X20X18 62.0 31.0 50* 22IPS X20X18 TEE FM-CL150 BF 150 668
24X22 64.0 32.0 38 24IPS X22 TEE FM-CL150 BF 150 754
24X22X20 64.0 32.0 54* 24IPS X22X20 TEE FM-CL150 BF 150 832

Note: *Indicates multistep step reducer required

Other sizes and DR's available. Please call for a quick quote.

Page 48
FM IPS CONCENTRIC REDUCERS

Dimensions (in) FM Weight

NPS Description
D1 D2 L1 L2 R Class (lbs)
6IPS X4 RED FM-CL200 200 4
6x4 6.63 4.50 4.0 4.0 0.25
6IPS X4 RED FM-CL150 150 4
8IPS X6X4 RED FM-CL200 200 13
8x6x4 8.63 4.50 8.0 8.0 0.25
8IPS X6X4 RED FM-CL150 150 12
8IPS X6 RED FM-CL200 200 9
8x6 8.63 6.63 4.0 4.0 0.25
8IPS X6 RED FM-CL150 150 8
10IPS X6 RED FM-CL200 200 17
10x6 10.75 6.63 6.0 4.0 0.25
10IPS X6 RED FM-CL150 150 16
10IPS X8 RED FM-CL200 200 17
10x8 10.75 8.63 6.0 4.0 0.25
10IPS X8 RED FM-CL150 150 15
12IPS X10X8 RED FM-CL200 200 40
12x10x8 12.75 8.63 12.0 12.0 0.25
12IPS X10X8 RED FM-CL150 150 35
12IPS X10 RED FM-CL200 200 23
12x10 12.75 10.75 6.0 6.0 0.25
12IPS X10 RED FM-CL150 150 21
14IPS X10 RED FM-CL200 200 33
14x10 14.00 10.75 7.0 7.0 0.5
14IPS X10 RED FM-CL150 150 30
14IPS X12 RED FM-CL200 200 32
14x12 14.00 12.75 7.0 7.0 0.5
14IPS X12 RED FM-CL150 150 28
16IPS X12 RED FM-CL200 200 43
16x12 16.00 12.75 7.0 7.0 0.5
16IPS X12 RED FM-CL150 150 39
16IPS X14 RED FM-CL200 200 42
16x14 16.00 14.00 7.0 7.0 0.5
16IPS X14 RED FM-CL150 150 37
18IPS X16X14 RED FM-CL200 200 95
18x16x14 18.00 14.00 7.0 7.0 0.5
18IPS X16X14 RED FM-CL150 150 83
18IPS X16 RED FM-CL200 200 53
18x16 18.00 16.00 7.0 7.0 0.5
18IPS X16 RED FM-CL150 150 46
20IPS X18X16 RED FM-CL200 200 118
20x18x16 20.00 16.00 14.0 14.0 0.5
20IPS X18X16 RED FM-CL150 150 103
20IPS X18 RED FM-CL200 200 65
20x18 20.00 18.00 7.0 7.0 0.5
20IPS X18 RED FM-CL150 150 57
22IPS X20X18 RED FM-CL200 200 155
22x20x18 22.00 18.00 16.0 16.0 0.5
22IPS X20X18 RED FM-CL150 150 135
22IPS X20 RED FM-CL200 200 90
22x20 22.00 20.00 8.0 8.0 0.5
22IPS X20 RED FM-CL150 150 78
24IPS X22X20 RED FM-CL200 200 210
24x22x20 24.00 20.00 18.0 18.0 0.5
24IPS X22X20 RED FM-CL150 150 182
24IPS X22 RED FM-CL200 200 120
24x22 24.00 22.00 9.0 9.0 0.5
24IPS X22 RED FM-CL150 150 104
26IPS X24 RED FM-CL200 200 141
26x24 26.00 24.00 9.0 9.0 0.5
26IPS X24 RED FM-CL150 150 122
28IPS X26X24 RED FM-CL200 200 306
28x26x24 28.00 24.00 18.0 18.0 0.75
28IPS X26X24 RED FM-CL150 150 268
28IPS X26 RED FM-CL200 200 166
28x26 28.00 26.00 9.0 9.0 0.75
28IPS X26 RED FM-CL150 150 147

Note: *Two reducers welded by butt fusion

Standard reducers may be welded together in an assembly to achieve the required size reduction
Page 49
FM IPS STUB END

Dimensions (in) Weight

NPS Part Description FM Class
A R C E F (lbs)
4IPS SE FM-CL200 200 1
4 6.60 0.25 4.50 1.73 0.98
4IPS SE FM-CL150 150 1
6IPS SE FM-CL200 200 2
6 8.50 0.25 6.63 2.01 1.06
6IPS SE FM-CL150 150 2
8IPS SE FM-CL200 200 3
8 10.72 0.25 8.63 2.24 1.26
8IPS SE FM-CL150 150 3
10IPS SE FM-CL200 200 6
10 13.11 0.50 10.75 2.72 1.50
10IPS SE FM-CL150 150 5
12IPS SE FM-CL200 200 10
12 15.57 0.50 12.75 3.15 1.85
12IPS SE FM-CL150 150 9
14IPS SE FM-CL200 200 15
14 17.27 0.50 14.00 3.94 2.36
14IPS SE FM-CL150 150 14
16IPS SE FM-CL200 200 19
16 19.32 0.50 16.00 3.94 2.36
16IPS SE FM-CL150 150 17
18IPS SE FM-CL200 200 26
18 21.18 0.50 18.00 4.53 2.76
18IPS SE FM-CL150 150 23
20IPS SE FM-CL200 200 32
20 23.45 0.50 20.00 4.72 2.76
20IPS SE FM-CL150 150 29
22IPS SE FM-CL200 200 40
22 25.35 0.50 22.00 5.12 2.76
22IPS SE FM-CL150 150 35
24IPS SE FM-CL200 200 47
24 27.58 0.50 24.00 5.12 2.76
24IPS SE FM-CL150 150 42
26IPS SE FM-CL200 200 63
26 30.21 0.50 26.00 5.51 3.27
26IPS SE FM-CL150 150 56
28IPS SE FM-CL200 200 67
28 31.43 0.50 28.00 5.51 3.27
28IPS SE FM-CL150 150 59

Page 50
FM IPS FLANGE ADAPTER

Dimensions (in) Weight

NPS Part Description FM Class
A R C E F (lbs)
4IPS FA FM-CL200 200 2
4 6.60 0.25 4.50 6.06 0.98
4IPS FA FM-CL150 150 2
6IPS FA FM-CL200 200 5
6 8.50 0.25 6.63 8.00 1.06
6IPS FA FM-CL150 150 4
8IPS FA FM-CL200 200 11
8 10.72 0.25 8.63 11.00 1.26
8IPS FA FM-CL150 150 9
10IPS FA FM-CL200 200 18
10 13.11 0.50 10.75 12.00 1.50
10IPS FA FM-CL150 150 15
12IPS FA FM-CL200 200 24
12 15.57 0.50 12.75 11.00 1.85
12IPS FA FM-CL150 150 21
14IPS FA FM-CL200 200 31
14 17.27 0.50 14.00 11.00 2.36
14IPS FA FM-CL150 150 27
16IPS FA FM-CL200 200 43
16 19.32 0.50 16.00 12.13 2.36
16IPS FA FM-CL150 150 37
18IPS FA FM-CL200 200 61
18 21.18 0.50 18.00 14.13 2.76
18IPS FA FM-CL150 150 53
20IPS FA FM-CL200 200 75
20 23.45 0.50 20.00 14.13 2.76
20IPS FA FM-CL150 150 65
22IPS FA FM-CL200 200 89
22 25.35 0.50 22.00 14.13 2.76
22IPS FA FM-CL150 150 77
24IPS FA FM-CL200 200 106
24 27.58 0.50 24.00 14.13 2.76
24IPS FA FM-CL150 150 91
26IPS FA FM-CL200 200 129
26 30.21 0.50 26.00 14.13 3.27
26IPS FA FM-CL150 150 112
28IPS FA FM-CL200 200 144
28 31.43 0.50 28.00 14.13 3.27
28IPS FA FM-CL150 150 123

Page 51
FM IPS BUTTERFLY VALVE RINGS

B2 a (º)
NPS OD BC Bolt BH T B1
(in) (in) (in) Hole No. (in) (in) (in)
CL150 CL200 CL150 CL200
4 9.00 7.50 8.00 0.75 1.00 4.50 3.6 3.41 48 42.5
6 11.00 9.50 8.00 0.88 1.00 6.63 5.3 5.01 37 31.8
8 13.50 11.75 8.00 0.88 1.00 8.63 6.89 6.53 30 25.5
10 16.00 14.25 12.00 1.00 1.00 10.75 5.89 8.14 24.8 21
12 19.00 17.00 12.00 1.00 1.00 12.75 10.19 9.65 21.3 17.9
14 21.00 18.75 12.00 1.13 1.50 14.00 11.19 10.6 28.1 23.8
16 23.50 21.25 16.00 1.13 1.50 16.00 12.79 12.11 25 21.1
18 25.00 22.75 16.00 1.25 1.50 18.00 14.39 13.62 22.6 18.9
20 27.50 25.00 20.00 1.25 1.50 20.00 15.98 15.14 20.5 17.2
22 29.50 27.25 20.00 1.38 2.00 22.00 17.58 16.65 24.3 20.5
24 32.00 29.50 20.00 1.38 2.00 24.00 19.18 18.16 22.5 18.9
26 34.25 31.75 24.00 1.38 2.00 26.00 20.78 19.68 21 17.6
28 36.50 34.00 28.00 1.38 2.00 28.00 22.38 20.19 19.6 14.4

Page 52
FM IPS DUCTILE IRON FLANGE

Specifications:
- Material: Ductile Iron ASTM A536
- Bolting pattern: ASME/ANSI B16.5 CLASS 150
ASME/ANSI B16.1 CLASS 125
ASME/ANSI B16.47 (SERIES A) CLASS 150
AWWA C207 D,E
- Surface finish: Standard finish red oxide primer, available epoxy coated or galvanized

Pipe Outside Bolt Diameter Bolt Flange Inside FM

Diameter Diameter Count of Bolt Circle Thickness Diameter Class
(in) OD N Hole
BD BC T ID
0.95 ± 0.05 4.70 ± 0.10 200
4 9.00 8 0.75 7.50
0.55 ± 0.05 4.75 ± 0.10 150
1.00 ± 0.05 6.80 ± 0.10 200
6 11.00 8 0.88 9.50
0.63 ± 0.05 6.88 ± 0.10 150
1.15 ± 0.05 8.80 ± 0.10 200
8 13.50 8 0.88 11.75
0.85 ± 0.05 8.88 ± 0.10 150
1.20 ± 0.05 10.95 ± 0.05 200
10 16.00 12 1.00 14.25
0.98 ± 0.05 11.00 ± 0.10 150
1.50 ± 0.05 13.00 ± 0.15 200
12 19.00 12 1.00 17.00
1.25 ± 0.05 13.15 ± 0.05 150
1.65 ± 0.05 14.20 ± 0.05 200
14 21.00 12 1.13 18.75
1.40 ± 0.05 14.30 ± 0.15 150
1.85 ± 0.05 16.20 ± 0.05 200
16 23.50 16 1.13 21.25
1.65 ± 0.05 16.30 ± 0.15 150
1.90 ± 0.15 18.30 ± 0.10 200
18 25.00 16 1.25 22.75
1.70 ± 0.05 18.35 ± 0.05 150
2.15 ± 0.10 20.40 ± 0.05 200
20 27.50 20 1.25 25
1.85 ± 0.05 20.40 ± 0.05 150
2.30 ± 0.20 22.38 ± 0.05 200
22 29.50 20 1.38 27.25
2.20 ± 0.25 22.38 ± 0.05 150
2.35 ± 0.25 24.35 ± 0.05 200
24 32.00 20 1.38 29.50
2.15 ± 0.05 24.35 ± 0.05 150
2.50 ± 0.05 26.35 ± 0.05 200
26 34.25 24 1.38 31.75
2.45 ± 0.10 26.35 ± 0.05 150
2.60 ± 0.05 28.35 ± 0.05 200
28 36.50 28 1.38 34.00
2.55 ± 0.05 28.35 ± 0.05 150

Page 53
FM IPS STEEL PLATE FLANGE

Specifications:
- Material: Steel Plate, ASTM A36
- Bolting pattern: ASME/ANSI B16.5 CLASS 150
ASME/ANSI B16.1 CLASS 125
ASME/ANSI B16.47 (SERIES A) CLASS 150
AWWA C207 B,D,E
- Surface finish: Standard red oxide primer, available epoxy coated or galvanized

Dimensions (in)
NPS
(in) OD T ID BD BOLTS # BC R

4 9.0 1.50 4.75 0.750 8 7.50 0.25

6 11.0 1.50 6.88 0.875 8 9.50 0.25

8 13.5 1.50 8.88 0.875 8 11.75 0.25

10 16.0 1.75 11 1.000 12 14.25 0.50

12 19.0 2.00 13.13 1.000 12 17.00 0.50

14 21.0 2.00 14.38 1.125 12 18.75 0.50

16 23.5 2.50 16.38 1.125 16 21.25 0.25

18 25.0 2.50 18.38 1.250 16 22.75 0.25

20 27.5 2.50 20.38 1.250 20 25.00 0.25

22 29.5 2.50 22.67 1.375 20 27.25 0.25

24 32.0 2.75 24.38 1.375 20 29.50 0.25

26 34.3 2.25 26.38 1.375 24 31.75 0.25

28 36.5 2.50 28.38 1.375 28 34.00 0.25

Page 54
FM IPS CARBON STEEL BLIND FLANGE

Specifications:
- Material: Carbon Steel ASTM A105N (4" to 26")
Carbon Steel ASTM A516 Gr. 70N (28")
- Bolting pattern: ASME/ANSI B16.5 CLASS 150
ASME/ANSI B16.1 CLASS 125
ASME/ANSI B16.47 (SERIES A) CLASS 150
AWWA C207 D,E
- Surface finish: Standard finish red oxide primer, available epoxy
coated or galvanized

Dimensions (in)
NPS FM
(in) BOLTS Class
OD T D BC R
#
CL150
4 9.00 0.94 0.75 8 7.50 5.31
CL200
CL150
6 11.00 1.00 0.88 8 9.50 7.56
CL200
CL150
8 13.50 1.12 0.88 8 11.75 10.62
CL200
CL150
10 16.00 1.19 1.00 12 14.25 12.75
CL200
CL150
12 19.00 1.25 1.00 12 17.00 14.38
CL200
CL150
14 21.00 1.38 1.12 12 18.75 15.75
CL200
CL150
16 23.50 1.44 1.12 16 21.25 18.50
CL200
CL150
18 25.00 1.56 1.25 16 22.75 21.00
CL200
CL150
20 27.50 1.69 1.25 20 25.00 23.00
CL200
CL150
22 29.50 1.75 1.38 20 27.25 25.25
CL200
CL150
24 32.00 1.88 1.38 20 29.50 27.25
CL200
CL150
26 34.25 2.69 1.38 24 31.75 29.50
CL200
CL150
28* 36.50 2.81 1.38 28 34.00 31.50
CL200

Page 55
 START YOUR

NEXT PROJECT

WITH US

1.866.KWH.PIPE

SALES OFFICES

North American Head Office

6507 Mississauga Road
Mississauga, Ontario L5N 1A6
Tel: 905.858.0206
Toll Free: 866.KWH-Pipe (594.7473)
Fax: 905.858.0208

Eastern Canada
7801 boul louis H. Lafontaine
Suite 101
Montreal, Quebec HIK 4E4
Tel: 514.352.3540
Toll Free: 800.393.7473
Fax: 514.352.3290

Western Canada
17665-66A Avenue, Unit 503B
Surrey, BC V3S 2A7
Tel: 604.574.7473
Toll Free: 800.668.1892
Fax: 604.574.7073

Western USA
5225 Canyon Crest Drive
Building 300, Suite 353
Riverside, CA 92507
Tel: 951.684.3472
Cell: 951.315.3632
Fax: 951.684.3572

Central & South America Head Office

6507 Mississauga Road
Mississauga, Ontario L5N 1A6
Tel: 905.858.0206
Toll Free: 866.KWH-Pipe (594.7473)
Fax: 905.858.0208

Web Site www.kwpipe.ca Email: [email protected]

Printed in Canada 10/08