0% found this document useful (0 votes)
139 views6 pages

01 Injection Lightning Brochure

Uploaded by

Jason Xue
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
139 views6 pages

01 Injection Lightning Brochure

Uploaded by

Jason Xue
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

LIGHTNING高速直压式瓶坯注塑系统

LIGHTNING HIGH SPEED DIRECT-CLAMPING INJECTION SYSTEM


与世界同步的高性能瓶坯生产系统
WORLD CLASS HIGH PERFORMANCE PREFORM
PRODUCTION SYSTEM

德玛克Lightning高速直压式瓶坯注塑系统为您带来与欧洲设 Demark Lightning high speed direct compression injection


备同源的系统配置,但是投资却比之前更低。高达144腔的瓶 system allows you gain the same level of specification as
European machine but with lower investment cost at the
坯生产系统包含双螺杆设计高速瓶坯注塑机,精密瓶坯注塑
same time.The system can produce with the preform
模具,模后冷却机械手,集中控制系统和高效原料干燥系 injection molds up to 144 cavities including double screw
统,为您带来更高的生产效率,更优的成品质量。同时更是 design high speed injection machine, precision preform
提 供 了 德 国 M H T瓶 坯 注 塑 模 具 供 您 选 配 。 injection molds, post cooling take out robot, centralized
control system and high efficient material drying system.
The results are higher production efficiency, lower
investment expense and better preform quality.You can
also choose MHT preform injection molds from Germany at
the same time.

不仅如此,德玛克还秉承包括瓶坯设计和整厂规划等交钥匙 Demark also insist on the "turnkey" solution concept by


服务理念,为您从多个维度提供更多的建议和帮助,使得您 offering preform design and whole plant planning to our
customers with more suggestion on various aspects to
在竞争激烈和快速变化的市场始终保持长期的竞争力。
help our customers keep long term competitive strength in
the hyper competitive, changeful consuming market.
后冷却机械手
POST COOLING TAKE OUT ROBOT

伺服电机溶胶
ELECTRIC SCREW DRIVE

可靠的锁模
RELIABLE CLAMPING

同步溶胶
SYNCHRONOUS MELTING

伺服阀控制
SERVO VALVE CONTROL

人机交互系统
高效蓄能器 HCI CONTROL SYSTEM
HIGH EFFICIENCT ACCUMULATOR
伺服电机溶胶 同步溶胶 可靠的锁模
ELECTRIC SCREW DRIVE SYNCHRONOUS MELTING RELIABLE CLAMPING
进口伺服电机溶胶,带来了节能和高 可实现溶胶和射胶同步进行,大幅度 专为PET瓶坯模具设计的模板结构,使
效的双重提升。 缩短成型周期。 得模具各部分都受力均匀,同时保证
了高速开合模的要求。
Independent electric screw drive brings Synchronous materia melting, Special design for PET preform mold,
you both melting and energy efficiency. plasticization and injection at the same. which ensures the fast clamping
movement and uniform force to the
mold.

后冷却机械手 高效蓄能器 伺服阀控制


POST COOLING TAKE OUT ROBOT HIGH EFFICIENCT ACCUMULATOR SERVO VALVE CONTROL
带副轴的模后冷却机械手使瓶坯充分冷 最高五组的高效蓄能器保证了大注射 先进的伺服阀控制理念,使得射胶更
却的同时,更缩短了产品生产周期。 量的快速和稳定。 加精准。

The double stage post cooling robot Up to 5 sets of high efficient Advanced servo valve control
makes the preform perfectly cooled with accumulator ensure the stabillity of technology makes the highly dynamic
better cycle time. high capacity injection. injection possible.

人机交互系统
HCI CONTROL SYSTEM
专门为PET生产设计的基于德国倍福的
集中操作系统。

BECKHOFF centralized control


system special designed for PET
production.
主要技术参数
MAIN TECHNICAL FEATURES

MODEL UNIT Lightning400/4500 Lightning500/6500

Screw Diameter 螺杆直径 mm 120 140 140

Screw L/D Ratio 螺杆长径比 L/D 27.5 28.5 28.5

Theoretical Injection Capacity(Max) 理论射出容量(最大) cm³ 3800 5888 5888


INJECTION
UNIT g 4560 7066 7066
注射单元 Shot Weight(PET) 射出量(PET)
oz 161 250 250

Injection pressure 射胶压力 kgf/cm² 1125 1180 1180

Size(LxWxH) 外形尺寸(长x宽x高) cm 600x210x290 650x210x340

Clamping Force 锁模力 Ton 430 500

Clamping Stroke 移模行程 mm 680 760

Max/Min Thickness of Mould 最小/大模厚 mm 500/800 600/1150


CLAMPING
UNIT Space Between Tie Bars(WxH) 导杆间距(宽x高) mm 930x1020 1024x1340
合模单元
Ejector Stroke 顶出行程 mm 200 200

Ejector Force 顶出力 Ton 23.9+63.6 23.9+63.6

NO. of Ejector Pins 顶出杆根数 Piece 7+8 13+8

Maximun System Pressure 最高系统压力 kgf/cm2 180 180

Cavity(Max) 腔数(Max) pcs 96/128 144/176

MOULD
Length of preform(Max) 最大管腔长度 mm 200 200
注坯模具

Type of Mould 模具形式 气动针阀式热流道模具 Needle Valve Of Non-cutting PET Preform Mold

Pump Motor Power 马达功率 KW 110+119+2.61 110+119+2.8

POWER Robot Power 机械手功率 KW 50.5 87.5


UNIT
电气单元 Heater Input Capacity 熔胶电热容量 KW 90 124 142

Mould Heater Capacity 模具加热容量 KW 89/98 139/153

AUTOMATIC
Robot Multi-station
EMBRYO 机械手多工位冷却装置 Piece 384 576/704
Cooling Device
自动取胚

V 380 380
Power supply 电源
(3-phase AC) (交流三相四线制)
KW 462.25/471.25 496.25/505.25 600.3/614.3

℃ 5-15 8-12

EXTERNAL Chilling Water 冷冻水要求 Mpa 0.8 0.8


REQUIREMENTS
外配要求 L/min 1200 1600

℃ <25 <25

Cooling Water 冷却水要求 Mpa 0.3 0.3

L/min 400 600

德玛克保留对产品进行修改的权利,规格如有变动,恕不另行通知。
demark reserve the rights to make any product improvement or specification change without prior notice.
地址: 中国浙江省湖州市长兴国家级开发区发展大道2587号
电话: 0572-6559071, 021-60391126
邮箱: [email protected]

DEMARK HOLDING GROUP


Add: No. 2587, Development Avenue, Changxing, Huzhou,
Zhejiang Province, China
TEL: +86-0572-6559071, +86- 021-60391126
EMAIL: [email protected]

www.demark-pet.com

ISO9001
◇ Copyright DEMARK CO., LTD. Information subject to alteration. 2021-06版
◇ 由于印刷的关系,故正式机器的颜色与所示的图片有部分差异,一切以机器实样为准。

You might also like