0% found this document useful (0 votes)
53 views2 pages

Mi 2592

The MI 2592 PowerQ4 is a portable 4-channel power quality analyzer with high measurement accuracy. It can simultaneously monitor over 500 parameters including voltage, current, power, harmonics, events, waveforms and energy. Data is recorded over 4 weeks and can be analyzed using the included PowerView software. The PowerQ4 complies with IEC standards for power quality measurement.

Uploaded by

john
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
53 views2 pages

Mi 2592

The MI 2592 PowerQ4 is a portable 4-channel power quality analyzer with high measurement accuracy. It can simultaneously monitor over 500 parameters including voltage, current, power, harmonics, events, waveforms and energy. Data is recorded over 4 weeks and can be analyzed using the included PowerView software. The PowerQ4 complies with IEC standards for power quality measurement.

Uploaded by

john
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Powerfull, high-end

MI 2592 PowerQ4 4-channel power

EW
quality analyser with
extraordinary

N
price-performance
ratio

The MI 2592 PowerQ4 is a handheld, simple to use, portable power quality analyser with four
current and four voltage measuring channels. MEASURING FUNCTIONS:
Integrated in rugged housing and packed with powerful functions it can be effectively used • Voltage: TRMS, peak, crest factor
for monitoring, troubleshooting and analysing of power quality conditions in power distribu- (4-channel)
tion networks either in industry or utilities. • Current: TRMS peak, crest factor
The PowerQ4 is the first handheld power quality analyser which is compliant with power qual- (4-channel)
ity standard IEC 61000-4-30 Class S and standard IEC 61557-12. • Power (active, reactive, apparent)
Powerful PC Software package PowerView comes delivered as part of a standard set and ena- • Power factor, cos ϕ
bles downloading, analysing of recorded data and printing of professional test reports. Trough • Unbalance, flicker measurement
a simple but powerful interface PowerView helps to find recorded data quickly and allows to • Harmonic analysis up to 50th
make complex analysis and data comparison. harmonics, THD measurement
• Energy (active, reactive, generated,
FEATURES: consumed)
• 4 voltage channels with wide measurement range: 0 ... 1000 Vrms (CAT III / 1000 V). • Power quality analysis according
• 4 current channels with support for automatic clamp recognition. to EN 50160
• Simultaneous measurement and recording of basic power quality parameters. • Capturing and recording of power
(U, I, P, Q, S, PF, cos ϕ, THD). supply events (shut-down’s,
• Power quality analysis according to EN 50160 including flicker measurement and standardized interruptions, swells, dips)
report printout in graphic and table form. • Inrush currents monitoring and
• 4-quadrant measurements (generator and load with capacitive or inductive character). recording
• 509 parameters can be monitored or recorded simultaneously. • Recording up to 10 adjustable alarms
• 8 MB of internal memory space allows recording over 4 weeks. • Waveform displaying and snapshot
• PowerQ4 is compliant with power quality standard IEC 61000-4-30 Class S.
• Power measurements comply with IEC 61557-12 and IEEE 1448. STANDARDS:
• Large LCD display, 320x200 dots, with backlight. Instrument is developed and
• On-line Scope, Trend and Metering modes. manufactured in accordance with
• Flexible clamps (without additional supply) are included in the standard set. following standards:
• Simultaneous 8 channels - 16 bit AD conversion for accurate power measurements Safety: EN 61010-1
(minimal phase shift error). EMC: EN 61326
• 15 hours of autonomous (battery) supply. Measurements:
• Powerful PC SW PowerView enables downloading, view, analysis of recorded data and IEC/EN 61000-4-30 Class S;
professional report creation. IEC/EN 61557-12;
IEC/EN 61000-4-7 Class II;
APPLICATION: IEC/EN 61000-4-15;
• Power quality assessment and troubleshooting in low and middle voltage electrical systems. IEEE 1448;
• Checking power correction equipment performance. IEC/EN 61000-4-15;
• Harmonics spectrum analysis for selection of harmonic filters. IEC/EN 61000-4-30 Class A or Class S*;
• UPS, voltage generators and regulators checking and troubleshooting. EN 50160
• Voltage, current, power monitoring and recording.
• Consumption profile recording.
Technical specification Ordering information:
Standard set Part No. MI 2592

Function
AC Voltage inputs
Number of inputs 4
Input voltage range 5 ... 1500 Vrms L - N (20 ... 2600 Vrms L - L)
Basic accuracy 0.2% of reading
Resolution 10 mV, 100 mV
Sampling rate 1024 samples per 10 periods
Frequency range 10 ... 70 Hz
AC Current inputs
Number of inputs 4
Input voltage range 20.0 mVrms ... 2 Vrms
Current measuring range 3 … 6000 A (for current clamp A 1227) • Instrument PowerQ4
Resolution 0.1 mV (0.1 A for current clamp A 1227) • 1-phase flexible current clamps 3000 / 300 / 30 A
Basic accuracy 0.25% of reading (A 1227), 4 pcs
• Test probe, red, 3 pcs
Sampling rate 1024 samples per 10 periods
• Test probe, black, 1 pcs
Function Measuring range Resolution Accuracy • Crocodile clip, black, 1 pcs
Frequency 10.00 ... 70.00 Hz 2 mHz ±10 mHz • Crocodile clip, red, 3 pcs
• Voltage measurement lead, red, 3 pcs
Power (W, VA, VAR) 0.000 k ... 9.999 M 4 digits ±0.5 % of reading • Voltage measurement lead, black, 1 pcs
Power factor -1.00 ... 1.00 0.01 ±0.02 • Voltage measurement lead, green, 1 pcs
• PC SW PowerView
cos ϕ 0.00 ... 1.00 0.01 ±0.02
• RS232 and USB cables
UhN < 3% Unom 10 mV 0.15 % Unom • Power supply adapter
3% Unom < UhN < 20% Unom 10 mV 5 % UhN • 1.2 V NiMH rechargeable battery, 6 pcs
Harmonics analysis
• Soft carrying bag
up 50th component
IhN < 10% IN 10 mV 0.15 % IN • Instruction manual
10% IN < IhN < 100% IN 10 mV 5 % IhN • Calibration certificate
0 % Unom < THDU < 20% Unom 0.1% ±0.3
THD
Optional accessories:
0 % IN < THDI < 100% IN 0.1% ±0.6
100 % IN < THDI < 200% IN 0.1% ±1.5 Photo Order No. Acc. decription
Voltage dips and
swells evaluation A 1020 Small soft carrying bag
Magnitude 20 ... 1500 V 10 mV, 100 mV 0.5% of reading
Duration 30 ms ... 7 days 1 ms ±20 ms
Recording
Integration period (IP) A 1033 Current clamp 1000 A /1 V
1 … 3600 s
Maximum number of
509
signals
Current transformer
Communication ports RS 232, USB A 1037
5 A/1 V
Display Graphic LCD with backlight, 320 x 200 dots
Memory module 8 MB Flash
Connection cable for current
Voltage supply 230 VAC or 6 x 1.2 V NiMH rechargeable batteries, size AA A 1039
clamp
Over voltage category 1000 V / CAT III; 600 V / CAT IV
Protection class double insulation Mini current clamp 100 A
A 1069
/1V
Dimensions 220 x 115 x 90 mm

Weight 0.65 kg
A 1122 Mini current clamp 5 A / 1 V

3-phase flexible current


A 1179
clamp 2000/200/20 A / 1 V

3-phase flexible current


A 1257
clamp 3000/300/30 A / 1 V

S 2014 Safety fuse adapter, 3 pcs

S 2015 Safety flat clamp, 4 pcs

Measuring and Regulation Equipment Manufacturer


METREL d.d.
Ljubljanska 77
SI-1354 Horjul
Tel: + 386 (0)1 75 58 200
Fax: + 386 (0)1 75 49 226
E-mail: [email protected] Note! Photographs in this catalogue may slightly differ
http://www.metrel.si from the instruments at the time of delivery.
Subject to technical change without notice.

You might also like