0% found this document useful (0 votes)
114 views108 pages

EBM Axial - EN - Mini - 070921

The document summarizes AC axial fans of the S series with diameters ranging from 200mm to 910mm. Key details include the material and construction of components, number of blades, direction of rotation, protection class, insulation class, mounting positions, condensate discharge, operating mode, and bearing type. Nominal data is provided for various fan models including voltage, frequency, airflow, speed, power input, current draw, sound level, pressure range, temperature range, mass, and electrical connection. Performance curves are shown for pressure, speed, power, and current versus airflow.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
114 views108 pages

EBM Axial - EN - Mini - 070921

The document summarizes AC axial fans of the S series with diameters ranging from 200mm to 910mm. Key details include the material and construction of components, number of blades, direction of rotation, protection class, insulation class, mounting positions, condensate discharge, operating mode, and bearing type. Nominal data is provided for various fan models including voltage, frequency, airflow, speed, power input, current draw, sound level, pressure range, temperature range, mass, and electrical connection. Performance curves are shown for pressure, speed, power, and current versus airflow.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 108

AC axial fans S series

AC axial fans, S series


AC axial fans, S series

Ø 500 - Ø 910
Ø 200 - Ø 450

23
74
24

Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial EC axial fans AC axial AC axial AC axial AC axial fans General
S series A series K series S series information
AC axial fans
S series, Ø 200

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet steel, coated in black
Rotor: Coated in black
– Number of blades: 9
– Direction of rotation: Counter-clockwise, seen on rotor
– Type of protection: IP 44
– Insulation class: "B"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range


Sound pressure level

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Current draw

attachments
Power input
Speed/rpm
Frequency

Capacitor
Air flow
Curve

Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.

3~ 230/400 50 890 2600 68 0.29/0.17 — 65 140 -25 to +45


*2D 200 (1) M2D 068-BF A
3~ 230/400 60 990 2900 70 0.23/0.13 — 68 140 -25 to +70 1.6 C1)/C2)
1~ 230 50 890 2600 64 0.30 1.5 /400 65 150 -25 to +70
*2E 200 M2E 068-BF B
1~ 230 60 990 2900 78 0.34 1.5 /400 68 150 -25 to +70 1.4 A1)
3~ 230/400 50 500 1440 20 0.12/0.07 — 43 70 -25 to +80
*4D 200 (1) M4D 068-BF C
3~ 230/400 60 600 1690 20 0.10/0.06 — 47 90 -25 to +90 1.4 C1)/C2)
1~ 230 50 470 1370 30 0.21 — 42 50 -25 to +75
*4S 200 M4S 068-BF D
1~ 230 60 540 1580 27 0.19 — 46 50 -25 to +80 1.2 B)
subject to alterations (1) 230 VAC ∆ / 400 VAC Y

n P1 I
Curves [rpm] [W] [A]

A 1 2540 70 0.29/0.17
[Pa]

[in H O]
2

A 2 2470 74 0.29/0.17
140 C 1 1430 21 0.12/0.07
C 2 1420 23 0.12/0.07
0,5

120
0,4

100

80 2
0,3

60 A
C
0,2

40 1

2
0,1

20 1

0 100 200 300 400 500 [CFM]

200 400 600 800 [m3/h]

50 Hz 60 Hz

24
information
General
AC axial fans
– Motor protection: A C Without TOP, B D TOP wired internally
– Cable exit: A C Lateral, B D variable
– Protection class: I
– Product conforming to standards: EN 60335-1, B D also CE
– Approvals: B CCC

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A" 
Without With full With guard grille With guard grille
attachments round nozzle (1) for full nozzle for short nozzle

EC axial fans
"V" A2D 200-AH18 -01 W2D 200-CH18 -01 S2D 200-BH18 -01 S2D 200-AH18 -01
"A" A2D 200-AI18 -01 W2D 200-CI18 -01 S2D 200-BI18 -01 S2D 200-AI18 -01
"V" A2E 200-AH38 -01 W2E 200-CH38 -01 S2E 200-BH38 -01 S2E 200-AH38 -01
"A" A2E 200-AI38 -01 W2E 200-CI38 -01 S2E 200-BI38 -01 S2E 200-AI38 -01
"V" A4D 200-AH14 -01 W4D 200-CH14 -01 S4D 200-BH14 -01 S4D 200-AH14 -01
"A" A4D 200-AI14 -01 W4D 200-CI14 -01 S4D 200-BI14 -01 S4D 200-AI14 -01
"V" A4S 200-AH04 -01 W4S 200-CH04 -01 S4S 200-BH04 -01 S4S 200-AH04 -01

EC axial
S series
"A" A4S 200-AI04 -01 W4S 200-CI04 -01 S4S 200-BI04 -01 S4S 200-AI04 -01
(1) Increased noise levels in "V" direction of air flow

Q-motor
n P1 I
Curves [rpm] [W] [A]

B 1 2555 67 0.31
[Pa]

[in H O]
2

ESM
B 2 2465 70 0.32
160
D 1 1360 31 0.22
0,6

D 2 1350 31 0.22
140 EC-SYSTEMS

120
0,4

100

80 2
Accessories

60 B
D
0,2

40 1

2
Technology

20 1

0 100 200 300 400 500 [CFM]

200 400 600 800 [m3/h]

50 Hz 60 Hz
Contacts

25
Drawings Guard grille Wall ring Terminal box Capacitor Electr. connections
p. 26 f. p. 362 f. p. 372 f. p. 381 p. 382 f. p. 416 f.
AC axial fans
S series, Ø 200, drawings of directions of air flow "V" and "A"

Type
Without attachments
A2D 200-AH18 -01 "V"
Depth of screw
A2D 200-AI18 -01 "A"
39±3 max. 5 mm
17 ±5 58 ±0,2 A2E 200-AH38 -01 "V"
A2E 200-AI38 -01 "A"
2 M4 A4D 200-AH14 -01 "V"
Brass lead tips
A4D 200-AI14 -01 "A"
Ø27 -0,1

Ø197 -2
Ø92

A4S 200-AH04 -01 "V"

90˚
27

A4S 200-AI04 -01 "A"


6
85
450 ±20
62 ±3

 "V"
"A" 

Type
With full round nozzle
W2D 200-CH18 -01 "V"
9 80 W2D 200-CI18 -01 "A"
5 W2E 200-CH38 -01 "V"
W2E 200-CI38 -01 "A"
W4D 200-CH14 -01 "V"
1,25

W4D 200-CI14 -01 "A"


250 W4S 200-CH04 -01 "V"
W4S 200-CI04 -01 "A"
Ø200
Ø280

15˚
7

˚
60
6x

 "V"
"A" 

Type
With guard grille for full nozzle
S2D 200-BH18 -01 "V"
3,9 4,5 S2D 200-BI18 -01 "A"
S2E 200-BH38 -01 "V"
S2E 200-BI38 -01 "A"
S4D 200-BH14 -01 "V"
S4D 200-BI14 -01 "A"
S4S 200-BH04 -01 "V"
245

S4S 200-BI04 -01 "A"

 "V"
"A" 

26
information
General
AC axial fans
Type
With guard grille for short nozzle
S2D 200-AH18 -01 "V"
23 S2D 200-AI18 -01 "A"
13 ±5 7 S2E 200-AH38 -01 "V"

AC axial
S series
S2E 200-AI38 -01 "A"
S4D 200-AH14 -01 "V"
S4D 200-AI14 -01 "A"
S4S 200-AH04 -01 "V"
229

260
S4S 200-AI04 -01 "A"

AC axial
K series
3,9
46

AC axial
A series
 "V"
"A" 

EC axial fans
EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

27
AC axial fans
S series, Ø 250

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet steel, coated in black
Rotor: Coated in black
– Number of blades: 7
– Direction of rotation: Counter-clockwise, seen on rotor
– Type of protection: IP 44
– Insulation class: "B"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range


Sound pressure level

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Current draw

attachments
Power input
Speed/rpm
Frequency

Capacitor
Air flow
Curve

Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.

3~ 230/400 50 1830 2500 100 0.34/0.20 — 69 150 -25 to +65


*2D 250 (1) M2D 068-CF A
3~ 230/400 60 1950 2650 140 0.40/0.23 — 70 150 -25 to +45 2.1 C1)/C2)
1~ 230 50 1820 2450 115 0.51 3.0 /400 69 120 -25 to +65
*2E 250 M2E 068-CF B
1~ 230 60 1970 2600 150 0.66 3.0 /400 71 85 -25 to +50 1.9 A1)
3~ 230/400 50 1010 1400 25 0.12/0.07 — 54 70 -25 to +85
*4D 250 (1) M4D 068-CF C
3~ 230/400 60 1140 1580 32 0.12/0.07 — 57 70 -25 to +80 1.9 C1)/C2)
1~ 230 50 1010 1400 42 0.19 1.5 /400 54 80 -25 to +55
*4E 250 M4E 068-BF D
1~ 230 60 1200 1630 45 0.20 1.5 /400 58 100 -25 to +70 1.9 A1)
1~ 230 50 1000 1390 69 0.53 — 54 80 -25 to +50
*4S 250 M4S 068-CF E
1~ 230 60 1160 1600 63 0.45 — 58 80 -25 to +65 1.7 B)
subject to alterations (1) 230 VAC ∆ / 400 VAC Y

n P1 I
Curves [rpm] [W] [A]

A 1 2455 106 0.34/0.20


[Pa]

[in H O]
2

A 2 2310 125 0.38/0.22


140 D 1 1370 43 0.20
D 2 1360 45 0.20
0,5

120 E 1 1370 71 0.53


E 2 1360 73 0.53
0,4

100 2
A

80 E
0,3

60
0,2

40
2
D
0,1

20 1
1

0 200 400 600 800 [CFM]

400 800 1200 1600 [m3/h]

50 Hz 60 Hz

28
information
General
AC axial fans
– Motor protection: A C Without TOP, B D E TOP wired internally
– Cable exit: A C E Lateral, B D variable
– Protection class: I
– Product conforming to standards: EN 60335-1, B D E also CE
– Approvals: A B D CCC; D also GOST

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A" 
Without With full With guard grille With guard grille
attachments round nozzle (1) for full nozzle for short nozzle

EC axial fans
"V" A2D 250-AH02 -01 W2D 250-CH02 -01 S2D 250-BH02 -01 S2D 250-AH02 -01
"A" A2D 250-AI02 -01 W2D 250-CI02 -01 S2D 250-BI02 -01 S2D 250-AI02 -01
"V" A2E 250-AL06 -01 W2E 250-CL06 -01 S2E 250-BL06 -01 S2E 250-AL06 -01
"A" A2E 250-AM06 -01 W2E 250-CM06 -01 S2E 250-BM06 -01 S2E 250-AM06 -01
"V" A4D 250-AH22 -01 W4D 250-CH22 -01 S4D 250-BH22 -01 S4D 250-AH22 -01
"A" A4D 250-AI22 -01 W4D 250-CI22 -01 S4D 250-BI22 -01 S4D 250-AI22 -01
"V" A4E 250-AH02 -01 W4E 250-CH02 -01 S4E 250-BH02 -01 S4E 250-AH02 -01

EC axial
S series
"A" A4E 250-AI02 -01 W4E 250-CI02 -01 S4E 250-BI02 -01 S4E 250-AI02 -01
"V" A4S 250-AH02 -01 W4S 250-CH02 -01 S4S 250-BH02 -01 S4S 250-AH02 -01
"A" A4S 250-AI02 -01 W4S 250-CI02 -01 S4S 250-BI02 -01 S4S 250-AI02 -01
(1) Increased noise levels in "V" direction of air flow

Q-motor
n P1 I
Curves [rpm] [W] [A]

B 1 2455 116 0.51


[Pa]

[in H O]
2

ESM
B 2 2290 132 0.57
140 C 1 1375 27 0.12/0.07
C 2 1350 30 0.12/0.07
0,5

120
EC-SYSTEMS
0,4

100
2
B
80
0,3

Accessories

60 C
0,2

40
2
0,1

20 1
Technology

0 200 400 600 800 [CFM]

400 800 1200 1600 [m3/h]

50 Hz 60 Hz
Contacts

29
Drawings Guard grille Wall ring Terminal box Capacitor Electr. connections
p. 30 f. p. 362 f. p. 372 f. p. 381 p. 382 f. p. 416 f.
AC axial fans
S series, Ø 250, drawings of directions of air flow "V" and "A"

Type
Without attachments a c
A2D 250-AH02 -01 "V" 72.0 18.0
Depth of screw
A2D 250-AI02 -01 "A" 72.0 21.0
c ±5 34 ±3 max. 5 mm
A2E 250-AL06 -01 "V" 72.0 18.0
58 ±0,2 A2E 250-AM06 -01 "A" 72.0 27.0
Brass lead tips 2 M4 A4D 250-AH22 -01 "V" 72.0 18.0
A4D 250-AI22 -01 "A" 72.0 27.0
Ø27-0,1

Ø251-2

A4E 250-AH02 -01 "V" 62.0 14.0


Ø92

90˚
27

A4E 250-AI02 -01 "A" 62.0 22.0


6 A4S 250-AH02 -01 "V" 72.0 18.0
85
450 ±20 A4S 250-AI02 -01 "A" 72.0 23.0

a ±3

 "V"
"A" 

Type
With full round nozzle
W2D 250-CH02 -01 "V"
9 87 W2D 250-CI02 -01 "A"
6
W2E 250-CL06 -01 "V"
W2E 250-CM06 -01 "A"
W4D 250-CH22 -01 "V"
1,25

295 W4D 250-CI22 -01 "A"


W4E 250-CH02 -01 "V"
W4E 250-CI02 -01 "A"
Ø257
Ø320

W4S 250-CH02 -01 "V"


15˚
7

W4S 250-CI02 -01 "A"

˚
60
6x
 "V"
"A" 

Type
With guard grille for full nozzle h k
S2D 250-BH02 -01 "V" 5.0 10.0
3,9 S2D 250-BI02 -01 "A" 0 0
h 4,5
S2E 250-BL06 -01 "V" 5.0 10.0
S2E 250-BM06 -01 "A" 0 0
k S4D 250-BH22 -01 "V" 5.0 10.0
S4D 250-BI22 -01 "A" 0 0
S4E 250-BH02 -01 "V" 5.0 10.0
S4E 250-BI02 -01 "A" 0 0
290

S4S 250-BH02 -01 "V" 5.0 10.0


S4S 250-BI02 -01 "A" 0 0

 "V"
"A" 

30
information
General
AC axial fans
Type
With guard grille for short nozzle m n u v
S2D 250-AH02 -01 "V" 50.0 5.0 14.0 34.0
v S2D 250-AI02 -01 "A" 45.0 0 17.0 34.0
u 7 S2E 250-AL06 -01 "V" 50.0 5.0 14.0 34.0

AC axial
S series
S2E 250-AM06 -01 "A" 45.0 0 23.0 34.0
S4D 250-AH22 -01 "V" 50.0 5.0 14.0 34.0
S4D 250-AI22 -01 "A" 45.0 0 23.0 34.0
S4E 250-AH02 -01 "V" 50.0 5.0 10.0 24.0

300
S4E 250-AI02 -01 "A" 45.0 0 18.0 24.0
271

S4S 250-AH02 -01 "V" 50.0 5.0 14.0 34.0

AC axial
K series
S4S 250-AI02 -01 "A" 45.0 0 19.0 34.0
n

3,9
m

AC axial
A series
 "V"
"A" 

EC axial fans
EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

31
AC axial fans 2-pole
S series, Ø 300

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet steel, coated in black
Rotor: Coated in black
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 44
– Insulation class: "B"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range


Sound pressure level

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Current draw

attachments
Power input
Speed/rpm
Frequency

Capacitor
Air flow
Curve

Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.

3~ 230/400 50 3130 2580 210 0.62/0.36 — 72 200 -25 to +55


*2D 300 (1) M2D 074-DF A
3~ 230/400 60 3350 2750 300 0.83/0.48 — 73 125 -25 to +40 3.0 C1)/C2)
1~ 230 50 3410 2700 230 1.10 8.0 /400 73 200 -25 to +50
*2E 300 M2E 074-DF B
1~ 230 60 3740 3000 350 1.55 8.0 /400 76 50 -25 to +40 3.0 A1)
subject to alterations (1) 230 VAC ∆ / 400 VAC Y

n P1 I
Curves [rpm] [W] [A]

A 1 2530 228 0.68/0.39


[Pa]

[in H O]
2

A 2 2400 273 0.78/0.45


200

160
0,6

120
A
0,4

80
0,2

40

0 500 1000 1500 2000 [CFM]

1000 2000 3000 [m3/h]

50 Hz 60 Hz

32
information
General
AC axial fans
– Motor protection: A Without TOP, B TOP wired internally
– Cable exit: Variable
– Protection class: I
– Product conforming to standards: EN 60335-1, B also CE
– Approvals: CCC

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A" 
Without With full With guard grille With guard grille
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" A2D 300-AP02 -01 W2D 300-CP02 -30 S2D 300-BP02 -30 S2D 300-AP02 -30
"A" A2D 300-AP02 -02 W2D 300-CP02 -31 S2D 300-BP02 -31 S2D 300-AP02 -31
"V" A2E 300-AP02 -01 W2E 300-CP02 -30 S2E 300-BP02 -30 S2E 300-AP02 -30
"A" A2E 300-AP02 -02 W2E 300-CP02 -31 S2E 300-BP02 -31 S2E 300-AP02 -31

EC axial
S series
Q-motor
n P1 I
Curves [rpm] [W] [A]

B 1 2680 252 1.11


[Pa]

[in H O]
2

ESM
B 2 2560 290 1.27
200

160
EC-SYSTEMS
0,6

120
0,4

Accessories

80

B
0,2

40
Technology

0 500 1000 1500 2000 [CFM]

1000 2000 3000 [m3/h]

50 Hz 60 Hz
Contacts

33
Drawings Guard grille Wall ring Terminal box Capacitor Electr. connections
p. 34 f. p. 362 f. p. 372 f. p. 381 p. 382 f. p. 416 f.
AC axial fans 2-pole
S series, Ø 300, drawings of directions of air flow "V" and "A"

Type
Without attachments
A2D 300-AP02 -01 "V"
- 0 + Depth of screw
A2D 300-AP02 -02 "A"
max. 10 mm
30 ±3 38 ±3 A2E 300-AP02 -01 "V"
A2E 300-AP02 -02 "A"
M4
Brass lead tips M6
5
Ø298 ±2

4x90˚
Ø75

Ø102

37

6
85
450 ±20

104 ±2 90 ±0,2

 "V"
"A" 

Type
With full round nozzle
W2D 300-CP02 -30 "V"
80 W2D 300-CP02 -31 "A"
11 W2E 300-CP02 -30 "V"
W2E 300-CP02 -31 "A"

380
Ø326
Ø397

15˚
9
˚
60
6x

0
 "V"
"A" 

Type
With guard grille for full nozzle
S2D 300-BP02 -30 "V"
0 S2D 300-BP02 -31 "A"
5 6,5 S2E 300-BP02 -30 "V"
S2E 300-BP02 -31 "A"
360

 "V"
"A" 

34
0
5

54
18
50

 "V"
"A" 
324
With guard grille for short nozzle

6,5

360
S2E
S2E
S2D
S2D
Type

300-AP02
300-AP02
300-AP02
300-AP02

-31
-30
-31
-30

"V"
"V"

"A"
"A"

35
Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial EC axial fans AC axial AC axial AC axial AC axial fans General
S series A series K series S series information
AC axial fans 4-pole
S series, Ø 300

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet steel, coated in black
Rotor: Coated in black
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 44
– Insulation class: "B"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range


Sound pressure level

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Current draw

attachments
Power input
Speed/rpm
Frequency

Capacitor
Air flow
Curve

Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.

3~ 230/400 50 1860 1370 60 0.29/0.17 — 57 90 -25 to +45


*4D 300 (1) M4D 068-CF A
3~ 230/400 60 2080 1540 75 0.26/0.15 — 60 60 -25 to +40 1.9 C1)/C2)
1~ 230 50 1740 1400 68 0.30 2.0 /400 59 80 -25 to +60
*4E 300 M4E 068-CF B
1~ 230 60 2040 1630 92 0.41 2.0 /400 63 70 -25 to +45 1.9 A1)
subject to alterations (1) 230 VAC ∆ / 400 VAC Y

n P1 I
Curves [rpm] [W] [A]

1350 66 0.29/0.17
[Pa]

[in H O]

A 1
2

A 2 1260 88 0.33/0.19
100

80 2
0,3

60
0,2

40
0,1

20

0 250 500 750 1000 [CFM]

500 1000 1500 [m3/h]

50 Hz 60 Hz

36
information
General
AC axial fans
– Motor protection: A Without TOP, B TOP wired internally
– Cable exit: A Axial, B variable
– Protection class: I
– Product conforming to standards: EN 60335-1, B also CE
– Approvals: CCC; B also GOST

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A" 
Without With full With guard grille With guard grille
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 300-AP28 -01 W4D 300-CP28 -30 S4D 300-BP28 -30 S4D 300-AP28 -30
"A" A4D 300-AP28 -02 W4D 300-CP28 -31 S4D 300-BP28 -31 S4D 300-AP28 -31
"V" A4E 300-AP26 -01 W4E 300-CP26 -30 S4E 300-BP26 -30 S4E 300-AP26 -30
"A" A4E 300-AP26 -02 W4E 300-CP26 -31 S4E 300-BP26 -31 S4E 300-AP26 -31

EC axial
S series
Q-motor
n P1 I
Curves [rpm] [W] [A]

1390 72 0.32
[Pa]

[in H O]

B 1
2

ESM
B 2 1290 88 0.39
100

80 2
EC-SYSTEMS
B
0,3

60
0,2

Accessories

40
0,1

20
Technology

0 250 500 750 1000 [CFM]

500 1000 1500 [m3/h]

50 Hz 60 Hz
Contacts

37
Drawings Guard grille Wall ring Terminal box Capacitor Electr. connections
p. 38 f. p. 362 f. p. 372 f. p. 381 p. 382 f. p. 416 f.
AC axial fans 4-pole
S series, Ø 300, drawings of directions of air flow "V" and "A"

Type
Without attachments c
A4D 300-AP28 -01 "V" 13.0
- 0 + Depth of screw
A4D 300-AP28 -02 "A" -7.0
max. 5 mm
c ±3 60 ±3 A4E 300-AP26 -01 "V" 13.0
A4E 300-AP26 -02 "A" -7.0
M4
Brass lead tips M4
2

4x90˚
Ø300-2
Ø27

Ø92

27

6
85
450 ±20

73 ±2 58 ±0,2

 "V"
"A" 

Type
With full round nozzle k
W4D 300-CP28 -30 "V" 0.0
80 W4D 300-CP28 -31 "A" 30.0
11 W4E 300-CP26 -30 "V" 0.0
W4E 300-CP26 -31 "A" 30.0

380
Ø326
Ø397

15˚
9
˚
60
6x

k
 "V"
"A" 

Type
With guard grille for full nozzle k
S4D 300-BP28 -30 "V" 0.0
k S4D 300-BP28 -31 "A" 30.0
4 4,5 S4E 300-BP26 -30 "V" 0.0
S4E 300-BP26 -31 "A" 30.0
360

 "V"
"A" 

38
information
General
AC axial fans
Type
With guard grille for short nozzle k u v
S4D 300-AP28 -30 "V" 0.0 23.0 23.0
50 S4D 300-AP28 -31 "A" 30.0 29.0 49.0
4 4,5
S4E 300-AP26 -30 "V" 0.0 23.0 23.0

AC axial
S series
S4E 300-AP26 -31 "A" 30.0 29.0 49.0
k
329,5

360

AC axial
K series
u

AC axial
A series
v

 "V"
"A" 

EC axial fans
EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

39
AC axial fans
S series, Ø 315

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet steel, coated in black
Rotor: Coated in black
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 44
– Insulation class: "B"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range


Sound pressure level

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Current draw

attachments
Power input
Speed/rpm
Frequency

Capacitor
Air flow
Curve

Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.

3~ 230/400 50 2450 1400 85 0.45/0.26 — 60 120 -25 to +55


*4D 315 (1) M4D 068-DF A
3~ 230/400 60 2810 1620 110 0.42/0.24 — 64 120 -25 to +55 2.4 C1)/C2)
1~ 230 50 2440 1410 102 0.52 4.0 /400 59 120 -25 to +55
*4E 315 M4E 068-DF B
1~ 230 60 2840 1650 120 0.53 4.0 /400 64 120 -25 to +55 2.4 A1)
1~ 230 50 1650 950 65 0.33 2.0 /400 51 70 -25 to +50
*6E 315 M6E 068-DF C
1~ 230 60 1950 1120 68 0.30 2.0 /450 55 80 -25 to +60 2.4 A1)
subject to alterations (1) 230 VAC ∆ / 400 VAC Y

n P1 I
Curves [rpm] [W] [A]

A 1 1400 90 0.45/0.26
[Pa]

[in H O]
2

A 2 1380 103 0.47/0.27

120
0,4

100

80
0,3

60 2
0,2

40
0,1

1
20

0 250 500 750 1000 1250 1500 [CFM]

600 1200 1800 2400 [m3/h]

50 Hz 60 Hz

40
Drawings
p. 42 f.
information
General
AC axial fans
– Motor protection: A Without TOP, B C TOP wired internally
– Cable exit: Axial
– Protection class: I
– Product conforming to standards: EN 60335-1, B C also CE
– Approvals: CCC; A also GOST

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"
Without With full With guard grille With guard grille In-line duct fan
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 315-AP10 -01 W4D 315-CP10 -30 S4D 315-BP10 -30 S4D 315-AP10 -30 W4D 315-IP10 -01
"A" A4D 315-AP10 -02 W4D 315-CP10 -31 S4D 315-BP10 -31 S4D 315-AP10 -31 —
"V" A4E 315-AP18 -01 W4E 315-CP18 -30 S4E 315-BP18 -30 S4E 315-AP18 -30 W4E 315-IP18 -01
"A" A4E 315-AP18 -02 W4E 315-CP18 -31 S4E 315-BP18 -31 S4E 315-AP18 -31 —
"V" A6E 315-AP02 -01 W6E 315-CP02 -30 S6E 315-BP02 -30 S6E 315-AP02 -30 —
"A" A6E 315-AP02 -02 W6E 315-CP02 -31 S6E 315-BP02 -31 S6E 315-AP02 -31 —

EC axial
S series
Q-motor
n P1 I
Curves [rpm] [W] [A]

B 1 1400 108 0.54


[Pa]

[in H O]
2

ESM
B 2 1380 120 0.57

120 C 1 945 63 0.33


C 2 930 66 0.33
0,4

100
EC-SYSTEMS

80
0,3

60 2
Accessories
0,2

40

2
0,1

C 1
20
Technology

0 250 500 750 1000 1250 1500 [CFM]

600 1200 1800 2400 [m3/h]

50 Hz 60 Hz
Contacts

41
Guard grille Streamer Wall ring Terminal box Capacitor Electr. connections
p. 362 f. p. 371 p. 372 f. p. 381 p. 382 f. p. 416 f.
AC axial fans
S series, Ø 315, drawings of directions of air flow "V" and "A"

Type
Without attachments c
A4D 315-AP10 -01 "V" 5.0
- 0 + Depth of screw
A4D 315-AP10 -02 "A" -7.0
max. 5 mm
c ±3 85 A4E 315-AP18 -01 "V" 5.0
A4E 315-AP18 -02 "A" -7.0
M4
Brass lead tips A6E 315-AP02 -01 "V" 5.0
M4
2 A6E 315-AP02 -02 "A" -7.0

4x90˚
Ø312 ±2
Ø27

Ø92

27

6
85
450 ±20

83 ±2 58 ±0,2

 "V"
"A" 

Type
With full round nozzle
W4D 315-CP10 -30 "V"
74 W4D 315-CP10 -31 "A"
11 W4E 315-CP18 -30 "V"
W4E 315-CP18 -31 "A"
W6E 315-CP02 -30 "V"
380 W6E 315-CP02 -31 "A"
Ø347
Ø397

15˚
9
˚
60
6x

33
 "V"
"A" 

Type
With guard grille for full nozzle
S4D 315-BP10 -30 "V"
30 S4D 315-BP10 -31 "A"
4,5 6,5 S4E 315-BP18 -30 "V"
S4E 315-BP18 -31 "A"
S6E 315-BP02 -30 "V"
S6E 315-BP02 -31 "A"
375

 "V"
"A" 

42
information
General
AC axial fans
Type
With guard grille for short nozzle u
S4D 315-AP10 -30 "V" 40.0
80 S4D 315-AP10 -31 "A" 28.0
4,5 6,5
S4E 315-AP18 -30 "V" 40.0

AC axial
S series
S4E 315-AP18 -31 "A" 28.0

30 S6E 315-AP02 -30 "V" 40.0


S6E 315-AP02 -31 "A" 28.0
336,5

375

AC axial
K series
u

AC axial
A series
33

 "V"
"A" 

Type
In-line duct fan

EC axial fans
W4D 315-IP10 -01 "V"
W4E 315-IP18 -01 "V"

EC axial
S series
Q-motor
 "V"

ESM
EC-SYSTEMS
Accessories
Technology
Contacts

43
AC axial fans
S series, Ø 330

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet steel, coated in black
Rotor: Coated in black
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 44
– Insulation class: "B"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range


Sound pressure level

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Current draw

attachments
Power input
Speed/rpm
Frequency

Capacitor
Air flow
Curve

Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.

3~ 230/400 50 2800 1390 100 0.45/0.26 — 59 120 -25 to +55


*4D 330 (1) M4D 068-DF A
3~ 230/400 60 3180 1570 130 0.42/0.24 — 63 120 -25 to +45 2.6 C1)/C2)
1~ 230 50 2830 1390 120 0.57 4.0 /400 63 90 -25 to +50
*4E 330 M4E 068-DF B
1~ 230 60 3230 1600 140 0.60 4.0 /400 67 75 -25 to +40 2.5 A1)
1~ 230 50 1940 940 65 0.33 2.0 /400 49 60 -25 to +50
*6E 330 M6E 068-DF C
1~ 230 60 2280 1100 72 0.32 2.0 /450 53 70 -25 to +65 2.5 A1)
subject to alterations (1) 230 VAC ∆ / 400 VAC Y

n P1 I
Curves [rpm] [W] [A]

A 1 1370 102 0.45/0.26


[Pa]

[in H O]
2

A 2 1325 126 0.48/0.28


0,5

120
0,4

100

80
0,3

2
60
0,2

40
0,1

1
20

0 500 1000 1500 [CFM]

500 1000 1500 2000 2500 3000 [m3/h]

50 Hz 60 Hz

44
information
General
AC axial fans
– Motor protection: A Without TOP, B C TOP wired internally
– Cable exit: Axial
– Protection class: I
– Product conforming to standards: EN 60335-1, B C also CE
– Approvals: B C CCC

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A" 
Without With full With guard grille With guard grille
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 330-AP10 -01 W4D 330-CP10 -30 S4D 330-BP10 -30 S4D 330-AP10 -30
"A" A4D 330-AP10 -02 W4D 330-CP10 -31 S4D 330-BP10 -31 S4D 330-AP10 -31
"V" A4E 330-AP18 -01 W4E 330-CP18 -30 S4E 330-BP18 -30 S4E 330-AP18 -30
"A" A4E 330-AP18 -02 W4E 330-CP18 -31 S4E 330-BP18 -31 S4E 330-AP18 -31
"V" A6E 330-AP02 -01 W6E 330-CP02 -30 S6E 330-BP02 -30 S6E 330-AP02 -30
"A" A6E 330-AP02 -02 W6E 330-CP02 -31 S6E 330-BP02 -31 S6E 330-AP02 -31

EC axial
S series
Q-motor
n P1 I
Curves [rpm] [W] [A]

B 1 1375 122 0.58


[Pa]

[in H O]
2

ESM
B 2 1325 140 0.64
C 1 925 68 0.34
0,5

120
C 2 910 70 0.35
EC-SYSTEMS
0,4

100

80
0,3

2
Accessories

60
B
0,2

40

2
C
0,1

1
20
Technology

0 500 1000 1500 [CFM]

500 1000 1500 2000 2500 3000 [m3/h]

50 Hz 60 Hz
Contacts

45
Drawings Guard grille Wall ring Terminal box Capacitor Electr. connections
p. 46 f. p. 362 f. p. 372 f. p. 381 p. 382 f. p. 416 f.
AC axial fans
S series, Ø 330, drawings of directions of air flow "V" and "A"

Type
Without attachments c
A4D 330-AP10 -01 "V" 6.0
- 0 + Depth of screw
A4D 330-AP10 -02 "A" -8.0
max. 5 mm
c ±3 87 A4E 330-AP18 -01 "V" 6.0
A4E 330-AP18 -02 "A" -8.0
M4
Brass lead tips A6E 330-AP02 -01 "V" 6.0
M4
2 A6E 330-AP02 -02 "A" -8.0

4x90˚
Ø27

Ø330 ±2
Ø92

27

6
85
450 ±20

83 ±2 58 ±0,2

 "V"
"A" 

Type
With full round nozzle
W4D 330-CP10 -30 "V"
80 W4D 330-CP10 -31 "A"
11 W4E 330-CP18 -30 "V"
W4E 330-CP18 -31 "A"
W6E 330-CP02 -30 "V"
404 W6E 330-CP02 -31 "A"
Ø369
Ø440

15˚
9
˚
60
6x

30
 "V"
"A" 

Type
With guard grille for full nozzle
S4D 330-BP10 -30 "V"
30 S4D 330-BP10 -31 "A"
4,5 6,5 S4E 330-BP18 -30 "V"
S4E 330-BP18 -31 "A"
S6E 330-BP02 -30 "V"
S6E 330-BP02 -31 "A"
410

 "V"
"A" 

46
information
General
AC axial fans
Type
With guard grille for short nozzle u
S4D 330-AP10 -30 "V" 43.0
80 S4D 330-AP10 -31 "A" 29.0
4,5 6,5
S4E 330-AP18 -30 "V" 43.0

AC axial
S series
S4E 330-AP18 -31 "A" 29.0

30 S6E 330-AP02 -30 "V" 43.0


S6E 330-AP02 -31 "A" 29.0
354,5

410

AC axial
K series
u

AC axial
A series
33

 "V"
"A" 

EC axial fans
EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

47
AC axial fans
S series, Ø 350

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet steel, coated in black
Rotor: Coated in black
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 44
– Insulation class: A C "B", B "F"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range


Sound pressure level

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Current draw

attachments
Power input
Speed/rpm
Frequency

Capacitor
Air flow
Curve

Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.

3~ 230/400 50 3340 1420 135 0.73/0.42 — 64 120 -25 to +60


*4D 350 (1) M4D 068-EC A
3~ 230/400 60 3815 1620 185 0.64/0.37 — 68 145 -25 to +45 3.6 C1)/C2)
1~ 230 50 3250 1365 132 0.58 5.0 /400 64 90 -25 to +60
*4E 350 M4E 068-EC B
1~ 230 60 3640 1530 180 0.80 5.0 /400 67 65 -25 to +50 3.6 A1)
1~ 230 50 2110 905 60 0.27 2.5 /400 55 40 -25 to +60
*6E 350 M6E 068-DF C
1~ 230 60 2420 1040 85 0.38 2.5 /400 58 45 -25 to +55 3.6 A1)
subject to alterations (1) 230 VAC ∆ / 400 VAC Y

n P1 I
Curves [rpm] [W] [A]

A 1 1400 150 0.75/0.43


[Pa]

[in H O]
2

A 2 1380 173 0.75/0.43

160
0,6

120
0,4

80 2

A
0,2

40
1

0 500 1000 1500 2000 [CFM]

1000 2000 3000 [m3/h]

50 Hz 60 Hz

48
Drawings
p. 50 f.
information
General
AC axial fans
– Motor protection: A Without TOP, B C TOP wired internally
– Cable exit: A Lateral, B C axial
– Protection class: I
– Product conforming to standards: EN 60335-1, B C also CE

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"
Without With full With guard grille With guard grille In-line duct fan
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 350-AR06 -01 W4D 350-CR06 -30 S4D 350-BR06 -30 S4D 350-AR06 -30 W4D 350-IR06 -01
"A" A4D 350-AR06 -02 W4D 350-CR06 -31 S4D 350-BR06 -31 S4D 350-AR06 -31 —
"V" A4E 350-AR06 -01 W4E 350-CR06 -30 S4E 350-BR06 -30 S4E 350-AR06 -30 W4E 350-IR06 -01
"A" A4E 350-AR06 -02 W4E 350-CR06 -31 S4E 350-BR06 -31 S4E 350-AR06 -31 —
"V" A6E 350-AR08 -01 W6E 350-CR08 -30 S6E 350-BR08 -30 S6E 350-AR08 -30 —
"A" A6E 350-AR08 -02 W6E 350-CR08 -31 S6E 350-BR08 -31 S6E 350-AR08 -31 —

EC axial
S series
Q-motor
n P1 I
Curves [rpm] [W] [A]

B 1 1335 142 0.63


[Pa]

[in H O]
2

ESM
B 2 1260 166 0.74
C 1 880 63 0.28
0,4

100
C 2 825 68 0.30
EC-SYSTEMS

80 2
0,3

60
0,2

B
Accessories

40 2
C

1
0,1

20 1
Technology

0 500 1000 1500 2000 [CFM]

1000 2000 3000 [m3/h]

50 Hz 60 Hz
Contacts

49
Guard grille Streamer Wall ring Terminal box Capacitor Electr. connections
p. 362 f. p. 371 p. 372 f. p. 381 p. 382 f. p. 416 f.
AC axial fans
S series, Ø 350, drawings of directions of air flow "V" and "A"

Type
Without attachments a c
A4D 350-AR06 -01 "V" 102.0 10.0
- 0 + Depth of screw
A4D 350-AR06 -02 "A" 102.0 -10.0
max. 5 mm
c ±3 92 ±3 A4E 350-AR06 -01 "V" 102.0 10.0
A4E 350-AR06 -02 "A" 102.0 -10.0
M4
Brass lead tips A6E 350-AR08 -01 "V" 83.0 5.0
M4
2 A6E 350-AR08 -02 "A" 83.0 -12.0
Ø352 ±2

4x90˚
Ø27

Ø92

27

6
85
600 ±20

a ±2 58 ±0,2

 "V"
"A" 

Type
With full round nozzle
W4D 350-CR06 -30 "V"
80 W4D 350-CR06 -31 "A"
12 W4E 350-CR06 -30 "V"
W4E 350-CR06 -31 "A"
W6E 350-CR08 -30 "V"
442 W6E 350-CR08 -31 "A"
Ø390
Ø460

15˚
9
˚
60
6x

30
 "V"
"A" 

Type
With guard grille for full nozzle
S4D 350-BR06 -30 "V"
30 S4D 350-BR06 -31 "A"
4,5 6,5 S4E 350-BR06 -30 "V"
S4E 350-BR06 -31 "A"
S6E 350-BR08 -30 "V"
S6E 350-BR08 -31 "A"
422

 "V"
"A" 

50
information
General
AC axial fans
Type
With guard grille for short nozzle u v
S4D 350-AR06 -30 "V" 52.0 52.0
80 S4D 350-AR06 -31 "A" 32.0 52.0
4,5 6,5
S4E 350-AR06 -30 "V" 52.0 52.0

AC axial
S series
S4E 350-AR06 -31 "A" 32.0 52.0

30 S6E 350-AR08 -30 "V" 47.0 33.0


S6E 350-AR08 -31 "A" 30.0 33.0

422
374

AC axial
K series
u

AC axial
A series
v

 "V"
"A" 

Type
In-line duct fan

EC axial fans
W4D 350-IR06 -01 "V"
W4E 350-IR06 -01 "V"

EC axial
S series
Q-motor
 "V"

ESM
EC-SYSTEMS
Accessories
Technology
Contacts

51
AC axial fans
S series, Ø 400

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet steel, coated in black
Rotor: Coated in black
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 44
– Insulation class: A B "B", C "F"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range


Sound pressure level

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Current draw

attachments
Power input
Speed/rpm
Frequency

Capacitor
Air flow
Curve

Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.

3~ 230/400 50 4000 1450 135 0.76/0.44 — 68 150 -25 to +40


*4D 400 (1)(2) M4D 074-EI A
3~ 230/400 60 4610 1690 185 0.68/0.39 — 72 120 -25 to +40 4.2 C1)/C2)
1~ 230 50 4235 1430 160 0.73 6.0 /400 69 150 -25 to +40
*4E 400 M4E 074-EI B
1~ 230 60 4950 1700 240 1.06 6.0 /400 73 75 -25 to +40 4.2 A1)
1~ 230 50 3290 940 120 0.55 3.0 /450 59 50 -25 to +40
*6E 400 M6E 074-DF C
1~ 230 60 3780 1080 170 0.75 3.0 /400 62 40 -25 to +60 4.0 A1)
subject to alterations (1) 400 VAC ∆/Y for two speed steps available on request (2) 230 VAC ∆ / 400 VAC Y

n P1 I
Curves [rpm] [W] [A]

A 1 1440 152 0.82/0.47


[Pa]

[in H O]
2

A 2 1415 195 0.86/0.50


160
0,6

120
0,4

80

A
0,2

40

0 500 1000 1500 2000 2500 [CFM]

1000 2000 3000 4000 [m3/h]

50 Hz 60 Hz

52
Drawings
p. 54 f.
information
General
AC axial fans
– Motor protection: A Without TOP, B C TOP wired internally
– Cable exit: Variable
– Protection class: I
– Product conforming to standards: EN 60335-1, B C also CE
– Approvals: CCC

AC axial
S series
– Options: Terminal box

AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"
Without With full With guard grille With guard grille In-line duct fan
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 400-AP12 -01 W4D 400-CP12 -30 S4D 400-BP12 -30 S4D 400-AP12 -03 W4D 400-IP12 -01
"A" A4D 400-AP12 -02 W4D 400-CP12 -31 S4D 400-BP12 -31 S4D 400-AP12 -04 —
"V" A4E 400-AP02 -01 W4E 400-CP02 -30 S4E 400-BP02 -30 S4E 400-AP02 -03 W4E 400-IP02 -01
"A" A4E 400-AP02 -02 W4E 400-CP02 -31 S4E 400-BP02 -31 S4E 400-AP02 -04 —
"V" A6E 400-AP10 -01 W6E 400-CP10 -30 S6E 400-BP10 -30 S6E 400-AP10 -30 —
"A" A6E 400-AP10 -02 W6E 400-CP10 -31 S6E 400-BP10 -31 S6E 400-AP10 -31 —

EC axial
S series
Q-motor
n P1 I
Curves [rpm] [W] [A]

B 1 1430 172 0.78


[Pa]

[in H O]
2

ESM
B 2 1395 210 0.93
160
C 1 935 126 0.57
0,6

C 2 895 140 0.62


EC-SYSTEMS

120
0,4

80
Accessories
0,2

2
B
40
C
Technology

1
1

0 500 1000 1500 2000 2500 [CFM]

1000 2000 3000 4000 [m3/h]

50 Hz 60 Hz
Contacts

53
Guard grille Streamer Wall ring Terminal box Capacitor Electr. connections
p. 362 ff. p. 371 p. 372 f. p. 381 p. 382 f. p. 416 f.
AC axial fans
S series, Ø 400, drawings of directions of air flow "V" and "A"

Type
Without attachments a c p
A4D 400-AP12 -01 "V" 117.0 26.0 68.0
- 0 + Depth of screw
A4D 400-AP12 -02 "A" 117.0 22.0 68.0
max. 10 mm
c ±3 p ±3 A4E 400-AP02 -01 "V" 117.0 26.0 68.0
A4E 400-AP02 -02 "A" 117.0 22.0 68.0
M4
Brass lead tips A6E 400-AP10 -01 "V" 104.0 -5.0 90.0
M6
5 A6E 400-AP10 -02 "A" 104.0 14.0 88.0

4x90˚
Ø392 ±2
Ø75

Ø102

37

6
85
600 ±20

a ±2 90 ±0,2

 "V"
"A" 

Type
With full round nozzle
W4D 400-CP12 -30 "V"
96 W4D 400-CP12 -31 "A"
12 W4E 400-CP02 -30 "V"
W4E 400-CP02 -31 "A"
W6E 400-CP10 -30 "V"
504 W6E 400-CP10 -31 "A"
Ø419
Ø528

15˚
9
˚
60
6x

30
 "V"
"A" 

Type
With guard grille for full nozzle
S4D 400-BP12 -30 "V"
30 S4D 400-BP12 -31 "A"
5 9 S4E 400-BP02 -30 "V"
S4E 400-BP02 -31 "A"
S6E 400-BP10 -30 "V"
S6E 400-BP10 -31 "A"
502

 "V"
"A" 

54
information
General
AC axial fans
Type
With guard grille for short nozzle f k u v
S4D 400-AP12 -03 "V" 420.0 10.0 24.0 47.0
80 S4D 400-AP12 -04 "A" 420.0 10.0 20.0 47.0
5 9
S4E 400-AP02 -03 "V" 420.0 10.0 24.0 47.0

AC axial
S series
S4E 400-AP02 -04 "A" 420.0 10.0 20.0 47.0

k S6E 400-AP10 -30 "V" 414.0 30.0 35.0 54.0


S6E 400-AP10 -31 "A" 414.0 30.0 52.0 54.0

470
f

AC axial
K series
u

AC axial
A series
v

 "V"
"A" 

Type
In-line duct fan

EC axial fans
W4D 400-IP12 -01 "V"
W4E 400-IP02 -01 "V"

EC axial
S series
Q-motor
 "V"

ESM
EC-SYSTEMS
Accessories
Technology
Contacts

55
AC axial fans
S series, Ø 420

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Plastic, coated in black
Rotor: Coated in black
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Speed/rpm (1)

Max. current

attachments
Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C kg p. 416 f.

A 3~ 400 ∆ 50 1360 260 0.52 — 95 -40 to +60


B 3~ 400 Y 50 1060 185 0.31 — 60 -40 to +60 5.8 F1b)/F2b)
*4D 420 M4D 094-EA
C 3~ 400 ∆ 60 1490 385 0.65 — 110 -40 to +60
D 3~ 400 Y 60 970 220 0.37 — 47 -40 to +60 5.8 F1b)/F2b)
1~ 230 50 1360 280 1.25 7.0 /400 95 -40 to +60
*4E 420 M4E 094-EA E
1~ 230 60 1520 385 1.68 7.0 /400 100 -40 to +60 5.8 A2b)
subject to alterations (1) Nominal data in operating point with maximum load

n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]

A 1 1380 225 0.47 67


[Pa]

[in H O]
2

A 2 1360 260 0.52 65

120 B 1 1120 170 0.29 61


B 2 1060 185 0.31 58
0,4

100
2
C

80
0,3

60 2

B
0,2

40 1
D
1
0,1

20

0 1000 2000 3000 [CFM]

1000 2000 3000 4000 5000 [m3/h]

50 Hz 60 Hz

56
information
General
AC axial fans
– Motor protection: A - D Design with thermal overload protector, E TOP wired internally
– Cable exit: Lateral via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A" 
Without With full With guard grille With guard grille
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 420-AU02 -01 W4D 420-CU02 -30 S4D 420-BU02 -30 S4D 420-AU02 -03
"A" A4D 420-AU02 -02 W4D 420-CU02 -31 S4D 420-BU02 -31 S4D 420-AU02 -04

"V" A4E 420-AU03 -01 W4E 420-CU03 -30 S4E 420-BU03 -30 S4E 420-AU03 -03
"A" A4E 420-AU03 -02 W4E 420-CU03 -31 S4E 420-BU03 -31 S4E 420-AU03 -04

EC axial
S series
Q-motor
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]

E 1 1390 247 1.13 67


[Pa]

[in H O]
2

ESM
E 2 1360 280 1.25 65

120
0,4

100
EC-SYSTEMS

80
0,3

60
Accessories
0,2

40 1
0,1

20
Technology

0 1000 2000 3000 [CFM]

1000 2000 3000 4000 5000 [m3/h]

50 Hz 60 Hz
Contacts

57
Drawings Guard grille Wall ring Capacitor Electr. connections
p. 58 f. p. 362 f. p. 372 f. p. 382 f. p. 416 f.
AC axial fans
S series, Ø 420, drawings of directions of air flow "V" and "A"

Type
Without attachments b c1 h
A4D 420-AU02 -01 "V" Ø 89 2.0 33.5
Depth of screw
A4D 420-AU02 -02 "A" Ø 89 16.0 33.5
max. 10 mm
A4E 420-AU03 -01 "V" 99x99 2.0 59.5
A4E 420-AU03 -02 "A" 99x99 16.0 59.5

Cable gland

 "V"
"A" 

Type
With full round nozzle
W4D 420-CU02 -30 "V"
W4D 420-CU02 -31 "A"
W4E 420-CU03 -30 "V"
W4E 420-CU03 -31 "A"

 "V"
"A" 

Type
With guard grille for full nozzle c2
S4D 420-BU02 -30 "V" 77.5
S4D 420-BU02 -31 "A" 91.5
S4E 420-BU03 -30 "V" 77.5
S4E 420-BU03 -31 "A" 91.5

 "V"
"A" 

58
 "V"
"A" 
With guard grille for short nozzle

S4E
S4E
S4D
S4D
Type

420-AU03
420-AU03
420-AU02
420-AU02

-04
-03
-04
-03

"V"
"V"

"A"
"A"
c3

61.5
47.5
61.5
47.5

59
Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial EC axial fans AC axial AC axial AC axial AC axial fans General
S series A series K series S series information
AC axial fans 6-pole
S series, Ø 420 / 450

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet steel, coated in black
Rotor: Coated in black
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 44
– Insulation class: "F"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range


Sound pressure level

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Current draw

attachments
Power input
Speed/rpm
Frequency

Capacitor
Air flow
Curve

Nominal data
Type Motor VAC Hz m3/h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.

1~ 230 50 3940 940 145 0.67 4.0 /450 60 90 -25 to +50


*6E 420 M6E 074-EI A
1~ 230 60 4570 1090 205 0.90 4.0 /450 63 80 -25 to +45 4.4 A1)
1~ 230 50 4725 940 165 0.80 4.0 /450 63 70 -25 to +40
*6E 450 M6E 074-GA B
1~ 230 60 5450 1070 225 0.98 4.0 /450 67 45 -25 to +40 5.0 A1)
subject to alterations

n P1 I
Curves [rpm] [W] [A]

A 1 930 155 0.71


[Pa]

[in H O]
2

A
A 2 890 176 0.80
160
0,6

120
0,4

80

2
0,2

40
1

0 1000 2000 3000 [CFM]

1000 2000 3000 4000 5000 [m3/h]

50 Hz 60 Hz

60
information
General
AC axial fans
– Motor protection: TOP wired internally
– Cable exit: Variable
– Protection class: I
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC

AC axial
S series
– Options: Terminal box

AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A" 
Without With full With guard grille With guard grille
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" A6E 420-AP02 -01 W6E 420-CP02 -30 S6E 420-BP02 -30 S6E 420-AP02 -30
"A" A6E 420-AP02 -02 W6E 420-CP02 -31 S6E 420-BP02 -31 S6E 420-AP02 -31
"V" A6E 450-AP02 -01 W6E 450-CP02 -01 S6E 450-BP02 -01 S6E 450-AP02 -01
"A" A6E 450-AP02 -02 W6E 450-CP02 -02 S6E 450-BP02 -02 S6E 450-AP02 -02

EC axial
S series
Q-motor
n P1 I
Curves [rpm] [W] [A]

B 1 930 171 0.82


[Pa]

[in H O]

B
2

ESM
B 2 870 200 0.94

120
0,4

100
EC-SYSTEMS

80
0,3

2
60
Accessories
0,2

40
0,1

20
Technology

0 1000 2000 3000 [CFM]

1000 2000 3000 4000 5000 6000 [m3/h]

50 Hz 60 Hz
Contacts

61
Drawings Guard grille Wall ring Terminal box Capacitor Electr. connections
p. 62 f. p. 362 ff. p. 372 f. p. 381 p. 382 f. p. 416 f.
AC axial fans
S series, Ø 420 / 450, drawings of directions of air flow "V" and "A"

Type
Without attachments a b c p
A6E 420-AP02 -01 "V" 117.0 418.0 2.0 89.0
- 0 + Depth of screw
A6E 420-AP02 -02 "A" 117.0 418.0 21.0 89.0
max. 10 mm
c ±3 p ±3 A6E 450-AP02 -01 "V" 129.0 446.0 10.0 92.0
A6E 450-AP02 -02 "A" 129.0 446.0 25.0 92.0
M4
Brass lead tips M6
5

4x90˚
Ø75

Ø102
Øb ±2

37

6
85
600 ±20

a ±2 90 ±0,2

 "V"
"A" 

Type
With full round nozzle s t u v w x
W6E 420-CP02 -30 "V" 9.0 520.0 96.0 12.0 447.0 544.0
u W6E 420-CP02 -31 "A" 9.0 520.0 96.0 12.0 447.0 544.0
v W6E 450-CP02 -01 "V" 11.0 578.0 100.0 14.0 465.0 607.0
W6E 450-CP02 -02 "A" 11.0 578.0 100.0 14.0 465.0 607.0

t
Øw
Øx

15˚
s
˚
60
6x

30
 "V"
"A" 

Type
With guard grille for full nozzle r
S6E 420-BP02 -30 "V" 502.0
30 S6E 420-BP02 -31 "A" 502.0
5 9 S6E 450-BP02 -01 "V" 522.0
S6E 450-BP02 -02 "A" 522.0
r

 "V"
"A" 

62
information
General
AC axial fans
Type
With guard grille for short nozzle f r u v
S6E 420-AP02 -30 "V" 452.0 502.0 41.0 67.0
80 S6E 420-AP02 -31 "A" 452.0 502.0 60.0 67.0
5 9
S6E 450-AP02 -01 "V" 476.0 522.0 52.0 79.0

AC axial
S series
S6E 450-AP02 -02 "A" 476.0 522.0 67.0 79.0

30

r
f

AC axial
K series
u

AC axial
A series
v

 "V"
"A" 

EC axial fans
EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

63
AC axial fans
S series, Ø 450

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Plastic, coated in black
Rotor: Coated in black
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Speed/rpm (1)

Max. current

attachments
Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C kg p. 416 f.

A 3~ 400 ∆ 50 1250 340 0.61 — 120 -40 to +60


B 3~ 400 Y 50 875 200 0.33 — 60 -40 to +60 6.0 F1b)/F2b)
*4D 450 M4D 094-EA
C 3~ 400 ∆ 60 1360 415 0.70 — 85 -40 to +50
D 3~ 400 Y 60 860 205 0.35 — 35 -40 to +50 6.0 F1b)/F2b)
1~ 230 50 1300 350 1.55 8.0 /400 120 -40 to +55
*4E 450 M4E 094-EA E
1~ 230 60 1490 425 1.87 8.0 /400 50 -40 to +45 6.0 A2b)
subject to alterations (1) Nominal data in operating point with maximum load

n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]

A 1 1300 285 0.54 67


[Pa]

[in H O]
2

A 2 1250 340 0.61 64

120 2 B 1 985 180 0.30 59


B 2 875 200 0.33 54
A
0,4

100

80
C
0,3

60 2 1
B
0,2

40

1
D
0,1

20

0 1000 2000 2000 [CFM]

1000 2000 3000 4000 5000 6000 [m3/h]

50 Hz 60 Hz

64
information
General
AC axial fans
– Motor protection: A - D Design with thermal overload protector, E TOP wired internally
– Cable exit: Lateral via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A" 
Without With full With guard grille With guard grille
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 450-AU01 -01 W4D 450-CU01 -01 S4D 450-BU01 -01 S4D 450-AU01 -01
"A" A4D 450-AU01 -02 W4D 450-CU01 -02 S4D 450-BU01 -02 S4D 450-AU01 -02

"V" A4E 450-AU03 -01 W4E 450-CU03 -01 S4E 450-BU03 -01 S4E 450-AU03 -01
"A" A4E 450-AU03 -02 W4E 450-CU03 -02 S4E 450-BU03 -02 S4E 450-AU03 -02

EC axial
S series
Q-motor
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]

E 1 1350 310 1.35 68


[Pa]

[in H O]
2

ESM
E 2 1300 350 1.55 65

120 2
0,4

100
EC-SYSTEMS

80
0,3

60 1
Accessories
0,2

40 E
0,1

20
Technology

0 1000 2000 3000 [CFM]

1000 2000 3000 4000 5000 6000 [m3/h]

50 Hz 60 Hz
Contacts

65
Drawings Guard grille Wall ring Capacitor Electr. connections
p. 66 f. p. 362 f. p. 372 f. p. 382 f. p. 416 f.
AC axial fans
S series, Ø 450, drawings of directions of air flow "V" and "A"

Type
Without attachments b c1 h
A4D 450-AU01 -01 "V" Ø 89 6.0 33.5
Depth of screw
A4D 450-AU01 -02 "A" Ø 89 20.0 33.5
max. 10 mm
A4E 450-AU03 -01 "V" 99x99 6.0 59.5
A4E 450-AU03 -02 "A" 99x99 20.0 59.5

Cable gland

 "V"
"A" 

Type
With full round nozzle
W4D 450-CU01 -01 "V"
W4D 450-CU01 -02 "A"
W4E 450-CU03 -01 "V"
W4E 450-CU03 -02 "A"

 "V"
"A" 

Type
With guard grille for full nozzle c2
S4D 450-BU01 -01 "V" 60.5
S4D 450-BU01 -02 "A" 74.5
S4E 450-BU03 -01 "V" 60.5
S4E 450-BU03 -02 "A" 74.5

 "V"
"A" 

66
 "V"
"A" 
With guard grille for short nozzle

S4E
S4E
S4D
S4D
Type

450-AU03
450-AU03
450-AU01
450-AU01

-02
-01
-02
-01

"V"
"V"

"A"
"A"
c3

33.5
19.5
33.5
19.5

67
Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial EC axial fans AC axial AC axial AC axial AC axial fans General
S series A series K series S series information
AC axial fans
S series, Ø 450

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet steel, coated in black
Rotor: Coated in black
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request
– Condensate discharges: Rotor-side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Mass without
Speed/rpm (1)

Max. current

attachments
Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C kg p. 416 f.

A 3~ 400 ∆ 50 1330 585 1.10 — 200 -40 to +70


B 3~ 400 Y 50 1000 390 0.67 — 110 -40 to +70 7.9 F1b)/F2b)
*4D 450 M4D 094-HA
C 3~ 400 ∆ 60 1540 660 1.16 — 110 -40 to +50
D 3~ 400 Y 60 1060 400 0.70 — 55 -40 to +50 7.9 F1b)/F2b)
1~ 230 50 1350 480 2.10 10.0 /400 125 -40 to +65
*4E 450 M4E 094-HA E
1~ 230 60 1490 665 2.90 10.0 /400 115 -40 to +50 7.9 A2b)
subject to alterations (1) Nominal data in operating point with maximum load

n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]

A 1 1400 392 0.89 72


[Pa]

[in H O]
2

A 2 1370 476 0.98 70


B 1 1170 303 0.53 68
0,8

200
B 2 1030 375 0.63 66

160
0,6

120 A
0,4

2
B
C
80
0,2

40 D
1 1

0 1000 2000 3000 4000 [CFM]

2000 4000 6000 [m3/h]

50 Hz 60 Hz

68
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Lateral via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"
Without With full With guard grille With guard grille In-line duct fan
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 450-BA14 -01 W4D 450-GA14 -01 S4D 450-HA14 -01 S4D 450-GA14 -01 —
"A" A4D 450-BA14 -02 W4D 450-GA14 -02 S4D 450-HA14 -02 S4D 450-GA14 -02 —

"V" A4E 450-BA09 -01 W4E 450-GA09 -01 S4E 450-HA09 -01 S4E 450-GA09 -01 —
"A" A4E 450-BA09 -02 W4E 450-GA09 -02 S4E 450-HA09 -02 S4E 450-GA09 -02 —

EC axial
S series
Q-motor
n P1 I LpA
Curves [rpm] [W] [A] [dB(A)]

E 1 1380 413 2.01 72


[Pa]

[in H O]
2

ESM
E 2 1360 460 2.20 70
0,8

200

EC-SYSTEMS

160
0,6

120
0,4

2
Accessories

80 E
0,2

40 1
Technology

0 1000 2000 3000 4000 [CFM]

2000 4000 6000 [m3/h]

50 Hz 60 Hz
Contacts

69
Drawings Guard grille Streamer Wall ring Capacitor Electr. connections
p. 72 f. p. 362 ff. p. 371 p. 372 f. p. 382 f. p. 416 f.
AC axial fans
S series, Ø 450

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

in-line duct fan


Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor

Mass of
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm W A µF/VDB Pa °C kg p. 416 f.

A 3~ 400 ∆ 50 1350 490 1.00 — 115 -40 to +95


*4D 450 M4D 110-EF 0° B 3~ 400 Y 50 1075 340 0.58 — 75 -40 to +95 14.5 F1b)/F2b)
1~ 230 50 1330 500 2.20 10.0 /400 100 -40 to +80
*4E 450 M4E 110-EF 0° C 14.5 A2b)
subject to alterations (1) Nominal data in operating point with maximum load

n P1 I LwA
Curves [rpm] [W] [A] [dB(A)]

A 1 1370 450 0.97 76


[Pa]

[in H O]
2

A 2 1360 470 0.99 77


A 3 1350 490 1.00 79
120
3 B 1 1120 320 0.56 71
A B 2 1090 330 0.57 73
0,4

100 B 3 1075 340 0.58 75

2
80
0,3

3
B

60
2
0,2

40
1
0,1

20

0 1000 2000 3000 4000 [CFM]

1000 2000 3000 4000 5000 6000 7000 [m3/h]

-10° -5° 0°

70
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"/ "A"   "V"
Without With full With guard grille With guard grille In-line duct fan
attachments round nozzle for full nozzle for short nozzle

EC axial fans
"V" — — — — W4D 450-IG01 -01
"A" — — — — —
"V" — — — — W4E 450-IG01 -01
"A" — — — — —

EC axial
S series
Q-motor
n P1 I LwA
Curves [rpm] [W] [A] [dB(A)]

C 1 1360 460 2.00 76


[Pa]

[in H O]
2

ESM
C 2 1340 480 2.10 77
C 3 1330 500 2.20 78
100
0,4

C
EC-SYSTEMS

2
80
0,3

60
0,2

Accessories

40
0,1

20
Technology

0 1000 2000 3000 4000 [CFM]

1000 2000 3000 4000 5000 6000 7000 [m3/h]


-10° -5° 0°
Contacts

71
Drawings Capacitor Electr. connections
p. 73 p. 382 f. p. 416 f.
AC axial fans
S series, Ø 450, drawings of directions of air flow "V" and "A"

Type
Without attachments b c h
A4D 450-BA14 -01 "V" Ø 89 35.0 33.5
A4D 450-BA14 -02 "A" Ø 89 36.7 33.5
A4E 450-BA09 -01 "V" 99x99 35.0 59.5
A4E 450-BA09 -02 "A" 99x99 36.7 59.5

Depth of screw
Cable gland max. 12 mm
 "V"
"A" 

Type
With full round nozzle
W4D 450-GA14 -01 "V"
W4D 450-GA14 -02 "A"
W4E 450-GA09 -01 "V"
W4E 450-GA09 -02 "A"

 "V"
"A" 

Type
With guard grille for full nozzle
S4D 450-HA14 -01 "V"
S4D 450-HA14 -02 "A"
S4E 450-HA09 -01 "V"
S4E 450-HA09 -02 "A"

 "V"
"A" 

72
information
General
AC axial fans
Type
With guard grille for short nozzle u
S4D 450-GA14 -01 "V" 64.0
S4D 450-GA14 -02 "A" 65.7
S4E 450-GA09 -01 "V" 64.0

AC axial
S series
S4E 450-GA09 -02 "A" 65.7

AC axial
K series
AC axial
A series
 "V"
"A" 

Type
In-line duct fan

EC axial fans
W4D 450-IG01 -01 "V"
W4E 450-IG01 -01 "V"

EC axial
S series
Q-motor
 "V"

ESM
EC-SYSTEMS
Accessories
Technology
Contacts

73
AC axial fans
S series, Ø 500

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

A 3~ 400 ∆ 50 1310 0.58 1.10 — 155 -40 to +85


*4D 500 M4D 110-EF -10° B 3~ 400 Y 50 1010 0.38 0.65 — 95 -40 to +85 F1b)/F2b)
C 3~ 400 ∆ 50 1325 0.82 1.59 — 160 -40 to +80
*4D 500 M4D 110-GF 0° D 3~ 400 Y 50 1035 0.55 0.95 — 100 -40 to +80 F1b)/F2b)
E 3~ 400 ∆ 50 1360 0.69 1.43 — 160 -40 to +90
*4D 500 M4D 110-GF -5° F 3~ 400 Y 50 1110 0.49 0.86 — 105 -40 to +90 F1b)/F2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

1355 0.46 0.97 76


[Pa]

[in H O]

A 1
2

A 2 1340 0.50 1.01 78


160 3 3 A 3 1310 0.58 1.10 80
3
0,6

B 1 1110 0.33 0.56 72


140 B 2 1070 0.34 0.60 73
B 3 1010 0.38 0.65 74
2
120
C 1 1355 0.70 1.39 77
A 2
3 C 2 1345 0.75 1.44 78
0,4

100 3 C 3 1325 0.82 1.59 80


2
3
D 1 1100 0.50 0.84 73
80 2 D 2 1070 0.52 0.87 72
B 2 1
E

1 C D 3 1035 0.55 0.95 74


2
60
F 1 E 1 1390 0.57 1.23 76
0,2

1
1 E 2 1380 0.62 1.29 77
40 1 E 3 1360 0.69 1.43 80
F 1 1180 0.43 0.72 73
D
20 F 2 1150 0.46 0.77 73
F 3 1110 0.49 0.86 76
0 1250 2500 3750 5000 [CFM]

2000 4000 6000 8000 [m3/h]

-10˚ -5˚ 0˚

74
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 500-AI01 -01 W4D 500-GI01 -01 S4D 500-CI01 -01 S4D 500-AI01 -01 — — —
"A" A4D 500-AI01 -02 W4D 500-DI01 -02 — — S4D 500-BI01 -02 S4D 500-AI01 -02 —
"V" A4D 500-AD03 -01 W4D 500-GD03 -01 S4D 500-CD03 -01 S4D 500-AD03 -01 — — W4D 500-ID03 -01
"A" A4D 500-AD03 -02 W4D 500-DD03 -02 — — S4D 500-BD03 -02 S4D 500-AD03 -02 —
"V" A4D 500-AE03 -01 W4D 500-GE03 -01 S4D 500-CE03 -01 S4D 500-AE03 -01 — — —
"A" A4D 500-AE03 -02 W4D 500-DE03 -02 — — S4D 500-BE03 -02 S4D 500-AE03 -02 —

EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

75
Drawings Speed setting Motor protection Electr. connections
p. 82 ff. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 500

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

A 3~ 400 ∆ 50 920 0.32 0.75 — 75 -40 to +75


*6D 500 M6D 110-EF 0° B 3~ 400 Y 50 765 0.23 0.40 — 50 -40 to +75 F1b)/F2b)
C 3~ 400 ∆ 50 945 0.29 0.74 — 80 -40 to +80
*6D 500 M6D 110-EF -5° D 3~ 400 Y 50 790 0.20 0.36 — 60 -40 to +80 F1b)/F2b)
E 3~ 400 ∆ 50 950 0.23 0.69 — 65 -40 to +80
*6D 500 M6D 110-EF -10° F1b)/F2b)
G 3~ 400 ∆ 50 700 0.21 0.61 — 45 -40 to +70
*8D 500 M8D 110-EF 0° H 3~ 400 Y 50 615 0.12 0.25 — 34 -40 to +70 F1b)/F2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

A 1 935 0.29 0.75 70


[Pa]

[in H O]
2

A 2 930 0.30 0.76 70


A 3 920 0.32 0.75 71
3
80
B 1 800 0.20 0.36 67
3
B 2 785 0.21 0.37 66
0,3

3
B 3 765 0.23 0.40 67

3
C 1 950 0.24 0.71 69
2
60
E
C 2 940 0.25 0.72 69
2
3 C 3 945 0.29 0.74 72
2
0,2

A
D 1 845 0.17 0.31 66
22 D 2 830 0.18 0.33 66
C
40
1 D 3 790 0.20 0.36 68
1
E 1 960 0.20 0.68 68
11
1 E 2 955 0.21 0.68 70
0,1

20
B E 3 950 0.23 0.69 71

0 1000 2000 3000 [CFM]

1000 2000 3000 4000 5000 6000 [m3/h]

-10˚ -5˚ 0˚

76
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A6D 500-AG03 -01 W6D 500-GG03 -01 S6D 500-CG03 -01 S6D 500-AG03 -01 — — —
"A" A6D 500-AG03 -02 W6D 500-DG03 -02 — — S6D 500-BG03 -02 S6D 500-AG03 -02 —
"V" A6D 500-AH03 -01 W6D 500-GH03 -01 S6D 500-CH03 -01 S6D 500-AH03 -01 — — —
"A" A6D 500-AH03 -02 W6D 500-DH03 -02 — — S6D 500-BH03 -02 S6D 500-AH03 -02 —
"V" A6D 500-AI03 -01 W6D 500-GI03 -01 S6D 500-CI03 -01 S6D 500-AI03 -01 — — —
"A" A6D 500-AI03 -02 W6D 500-DI03 -02 — — S6D 500-BI03 -02 S6D 500-AI03 -02 —
"V" A8D 500-AG01 -01 W8D 500-GG01 -01 S8D 500-CG01 -01 S8D 500-AG01 -01 — — —

EC axial
S series
"A" A8D 500-AG01 -02 W8D 500-DG01 -02 — — S8D 500-BG01 -02 S8D 500-AG01 -02 —

Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

G 1 710 0.19 0.64 64


[Pa]

[in H O]
2

ESM
G 2 710 0.20 0.63 62
G 3 700 0.21 0.61 65
0,20

50
H 1 635 0.11 0.23 61
3
H 2 630 0.12 0.24 60
615 0.12 0.25 61
EC-SYSTEMS
G H 3

40
0,15

3
2

30
2
0,10

Accessories

H
1
20
1
0,05

10
Technology

0 500 1000 1500 2000 2500 [CFM]

1000 2000 3000 4000 [m3/h]

-10˚ -5˚ 0˚
Contacts

77
Drawings Speed setting Motor protection Electr. connections
p. 82 ff. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 500

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

*4E 500 M4E 110-EF -10° A 1~ 230 50 1300 0.53 2.31 10.0 /450 115 -40 to +75 A2b)

*4E 500 M4E 110-GF 0° B 1~ 230 50 1270 0.76 3.33 14.0 /400 130 -40 to +60 A2b)

*4E 500 M4E 110-GF -5° C 1~ 230 50 1330 0.71 3.10 14.0 /450 160 -40 to +70 A2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

1345 0.47 2.06 76


[Pa]

[in H O]

A 1
2

3
A 2 1320 0.51 2.21 77
160 A 3 1300 0.53 2.31 78
0,6

B 1 1305 0.71 3.13 77


140
3 B 2 1285 0.75 3.28 77
B 3 1270 0.76 3.33 78
120 2
3 2 C 1 1375 0.59 2.59 76
C 2 1355 0.64 2.80 77
0,4

100 C 3 1330 0.71 3.10 80


B
2

80 1
1

60 A

1
0,2

40

20

0 1250 2500 3750 5000 [CFM]

2000 4000 6000 8000 [m3/h]

-10˚ -5˚ 0˚

78
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A4E 500-AI01 -01 W4E 500-GI01 -01 S4E 500-CI01 -01 S4E 500-AI01 -01 — — —
"A" A4E 500-AI01 -02 W4E 500-DI01 -02 — — S4E 500-BI01 -02 S4E 500-AI01 -02 —
"V" A4E 500-AD03 -01 W4E 500-GD03 -01 S4E 500-CD03 -01 S4E 500-AD03 -01 — — W4E 500-ID03 -01
"A" A4E 500-AD03 -02 W4E 500-DD03 -02 — — S4E 500-BD03 -02 S4E 500-AD03 -02 —
"V" A4E 500-AE03 -01 W4E 500-GE03 -01 S4E 500-CE03 -01 S4E 500-AE03 -01 — — —
"A" A4E 500-AE03 -02 W4E 500-DE03 -02 — — S4E 500-BE03 -02 S4E 500-AE03 -02 —

EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

79
Drawings Capacitor Speed setting Motor protection Electr. connections
p. 82 ff. p. 382 f. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 500

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

*6E 500 M6E 110-EF 0° A 1~ 230 50 890 0.30 1.32 8.0 /400 70 -40 to +80 A2b)

*6E 500 M6E 110-EF -5° B 1~ 230 50 910 0.27 1.19 8.0 /450 80 -40 to +85 A2b)

*6E 500 M6E 110-EF -10° C 1~ 230 50 930 0.25 1.10 8.0 /450 85 -40 to +85 A2b)

*8E 500 M8E 110-EF 0° D 1~ 230 50 690 0.19 1.11 4.0 /450 40 -40 to +80 A2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

A 1 910 0.28 1.20 71


[Pa]

[in H O]
2

A 2 900 0.29 1.25 69


3 A 3 890 0.30 1.32 70
3 B

80
B 1 935 0.24 1.04 69
B 2 925 0.25 1.09 69
0,3

C 3 B 3 910 0.27 1.19 72


2
C 1 945 0.23 0.99 69
60 C 2 940 0.24 1.04 71
2 2
C 3 930 0.25 1.10 74
0,2

A
1

40
1
1
0,1

20

0 1000 2000 3000 [CFM]

1000 2000 3000 4000 5000 6000 [m3/h]

-10˚ -5˚ 0˚

80
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A6E 500-AG03 -01 W6E 500-GG03 -01 S6E 500-CG03 -01 S6E 500-AG03 -01 — — W6E 500-IG03 -01
"A" A6E 500-AG03 -02 W6E 500-DG03 -02 — — S6E 500-BG03 -02 S6E 500-AG03 -02 —
"V" A6E 500-AH03 -01 W6E 500-GH03 -01 S6E 500-CH03 -01 S6E 500-AH03 -01 — — —
"A" A6E 500-AH03 -02 W6E 500-DH03 -02 — — S6E 500-BH03 -02 S6E 500-AH03 -02 —
"V" A6E 500-AI03 -01 W6E 500-GI03 -01 S6E 500-CI03 -01 S6E 500-AI03 -01 — — —
"A" A6E 500-AI03 -02 W6E 500-DI03 -02 — — S6E 500-BI03 -02 S6E 500-AI03 -02 —
"V" A8E 500-AG01 -01 W8E 500-GG01 -01 S8E 500-CG01 -01 S8E 500-AG01 -01 — — —

EC axial
S series
"A" A8E 500-AG01 -02 W8E 500-DG01 -02 — — S8E 500-BG01 -02 S8E 500-AG01 -02 —

Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

D 1 695 0.18 1.09 64


[Pa]

[in H O]
2

ESM
D 2 695 0.19 1.10 63
D 3 690 0.19 1.11 63
0,20

50

EC-SYSTEMS
3
40
0,15

2
30
0,10

Accessories

1
20
0,05

10
Technology

0 500 1000 1500 2000 2500 [CFM]

1000 2000 3000 4000 [m3/h]

-10˚ -5˚ 0˚
Contacts

81
Drawings Capacitor Speed setting Motor protection Electr. connections
p. 82 ff. p. 382 f. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 500, drawings for direction of air flow "V"

Type Mass
Without attachments [kg] c d g
A4D 500-AI01 -01 8.8 92.0 78.0 188.5
A4D 500-AD03 -01 11.0 104.0 101.0 208.5
A4D 500-AE03 -01 11.0 98.0 89.0 208.5
A6D 500-AG03 -01 8.8 104.0 101.0 188.5
A6D 500-AH03 -01 8.8 98.0 89.0 188.5
A6D 500-AI03 -01 8.8 92.0 78.0 188.5
A8D 500-AG01 -01 8.8 104.0 101.0 188.5
A4E 500-AI01 -01 8.8 92.0 78.0 188.5
A4E 500-AD03 -01 11.0 104.0 101.0 208.5
A4E 500-AE03 -01 11.0 98.0 89.0 208.5
A6E 500-AG03 -01 8.8 104.0 101.0 188.5
A6E 500-AH03 -01 8.8 98.0 89.0 188.5
A6E 500-AI03 -01 8.8 92.0 78.0 188.5
Depth of screw A8E 500-AG01 -01 8.8 104.0 101.0 188.5
max. 12 mm
Cable gland

 "V"

Type Mass
With full square nozzle [kg]
W4D 500-GI01 -01 18.6
W4D 500-GD03 -01 21.0
W4D 500-GE03 -01 21.0
W6D 500-GG03 -01 18.6
W6D 500-GH03 -01 18.6
W6D 500-GI03 -01 18.6
W8D 500-GG01 -01 18.6
W4E 500-GI01 -01 18.6
W4E 500-GD03 -01 21.0
W4E 500-GE03 -01 21.0
W6E 500-GG03 -01 18.6
W6E 500-GH03 -01 18.6
W6E 500-GI03 -01 18.6
W8E 500-GG01 -01 18.6

 "V"

Type Mass
With guard grille for full nozzle [kg] r s t
S4D 500-CI01 -01 12.6 63.5 91.0 123.0
6,5 S4D 500-CD03 -01 14.8 65.5 103.0 143.0
View X S4D 500-CE03 -01 14.8 65.5 97.0 143.0
S6D 500-CG03 -01 12.6 65.5 103.0 123.0
S6D 500-CH03 -01 12.6 65.5 97.0 123.0
S6D 500-CI03 -01 12.6 63.5 97.0 123.0
S8D 500-CG01 -01 12.6 63.5 103.0 123.0
S4E 500-CI01 -01 12.6 63.5 91.0 123.0
S4E 500-CD03 -01 14.8 65.5 103.0 143.0
S4E 500-CE03 -01 14.8 65.5 97.0 143.0
S6E 500-CG03 -01 12.6 63.5 103.0 123.0
S6E 500-CH03 -01 12.6 63.5 97.0 123.0
S6E 500-CI03 -01 12.6 63.5 97.0 123.0
S8E 500-CG01 -01 12.6 63.5 103.0 123.0

 "V"

82
information
General
AC axial fans
Type Mass
With guard grille for short nozzle [kg] u v
S4D 500-AI01 -01 13.3 32.0 64.0
S4D 500-AD03 -01 15.5 44.0 84.0
S4D 500-AE03 -01 15.5 38.0 84.0

AC axial
S series
S6D 500-AG03 -01 13.3 44.0 64.0
S6D 500-AH03 -01 13.3 38.0 64.0
S6D 500-AI03 -01 13.3 32.0 64.0
S8D 500-AG01 -01 13.3 44.0 64.0
S4E 500-AI01 -01 13.3 32.0 64.0
S4E 500-AD03 -01 15.5 44.0 84.0

AC axial
K series
S4E 500-AE03 -01 15.5 38.0 84.0
S6E 500-AG03 -01 13.3 44.0 64.0
S6E 500-AH03 -01 13.3 38.0 64.0
S6E 500-AI03 -01 13.3 32.0 64.0
S8E 500-AG01 -01 13.3 44.0 64.0

AC axial
A series
 "V"

Type Mass
In-line duct fan

EC axial fans
[kg]
W4D 500-ID03 -01 16.8
W4E 500-ID03 -01 16.8
W6E 500-IG03 -01 14.8

EC axial
S series
Q-motor
 "V"

ESM
EC-SYSTEMS
Accessories
Technology
Contacts

83
AC axial fans
S series, Ø 500, drawings for direction of air flow "A"

Type Mass
Without attachments [kg] c d g
A4D 500-AI01 -02 8.8 95.0 78.0 188.5
A4D 500-AD03 -02 11.0 131.0 101.0 208.5
A4D 500-AE03 -02 11.0 126.0 89.0 208.5
A6D 500-AG03 -02 8.8 131.0 101.0 188.5
A6D 500-AH03 -02 8.8 126.0 89.0 188.5
A6D 500-AI03 -02 8.8 120.0 78.0 188.5
A8D 500-AG01 -02 8.8 131.0 101.0 188.5
A4E 500-AI01 -02 8.8 120.0 78.0 188.5
A4E 500-AD03 -02 11.0 131.0 101.0 208.5
A4E 500-AE03 -02 11.0 126.0 89.0 208.5
A6E 500-AG03 -02 8.8 131.0 101.0 188.5
A6E 500-AH03 -02 8.8 126.0 89.0 188.5
A6E 500-AI03 -02 8.8 120.0 78.0 188.5
Depth of screw A8E 500-AG01 -02 8.8 131.0 101.0 188.5
max. 12 mm
Cable gland

"A" 

Type Mass
With full square nozzle [kg]
W4D 500-DI01 -02 18.8
W4D 500-DD03 -02 21.0
W4D 500-DE03 -02 21.0
W6D 500-DG03 -02 18.8
W6D 500-DH03 -02 18.8
W6D 500-DI03 -02 18.8
W8D 500-DG01 -02 18.8
W4E 500-DI01 -02 18.8
W4E 500-DD03 -02 21.0
W4E 500-DE03 -02 21.0
W6E 500-DG03 -02 18.8
W6E 500-DH03 -02 18.8
W6E 500-DI03 -02 18.8
W8E 500-DG01 -02 18.8

"A" 

Type Mass
With guard grille for full nozzle [kg] s t
S4D 500-BI01 -02 12.6 95.0 99.0
S4D 500-BD03 -02 14.8 119.0 106.0
S4D 500-BE03 -02 14.8 119.0 101.0
S6D 500-BG03 -02 12.6 99.0 106.0
S6D 500-BH03 -02 12.6 99.0 101.0
S6D 500-BI03 -02 12.6 95.0 99.0
S8D 500-BG01 -02 12.6 106.0 99.0
S4E 500-BI01 -02 12.6 95.0 99.0
S4E 500-BD03 -02 14.8 119.0 106.0
S4E 500-BE03 -02 14.8 119.0 101.0
S6E 500-BG03 -02 12.6 106.0 99.0
S6E 500-BH03 -02 12.6 101.0 99.0
S6E 500-BI03 -02 12.6 95.0 99.0
S8E 500-BG01 -02 12.6 106.0 99.0

"A" 

84
information
General
AC axial fans
Type Mass
With guard grille for short nozzle [kg] u v
S4D 500-AI01 -02 12.3 45.0 49.0
S4D 500-AD03 -02 14.5 56.0 69.0
S4D 500-AE03 -02 14.5 51.0 69.0

AC axial
S series
S6D 500-AG03 -02 12.3 56.0 49.0
S6D 500-AH03 -02 12.3 51.0 49.0
S6D 500-AI03 -02 12.3 45.0 49.0
S8D 500-AG01 -02 12.3 56.0 49.0
S4E 500-AI01 -02 12.3 45.0 49.0
S4E 500-AD03 -02 14.5 56.0 69.0

AC axial
K series
S4E 500-AE03 -02 14.5 51.0 69.0
S6E 500-AG03 -02 12.3 56.0 49.0
S6E 500-AH03 -02 12.3 51.0 49.0
S6E 500-AI03 -02 12.3 45.0 49.0
S8E 500-AG01 -02 12.3 56.0 49.0

AC axial
A series
"A" 

EC axial fans
EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

85
AC axial fans
S series, Ø 560

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

A 3~ 400 ∆ 50 1305 0.93 1.78 — 195 -40 to +65


*4D 560 M4D 110-GF -10° B 3~ 400 Y 50 995 0.60 1.05 — 110 -40 to +65 F1b)/F2b)
C 3~ 400 ∆ 50 1355 1.17 2.53 — 170 -40 to +60
*4D 560 M4D 110-IA -5° D 3~ 400 Y 50 1080 0.80 1.45 — 113 -40 to +60 F1b)/F2b)
E 3~ 400 ∆ 50 860 0.50 0.95 — 80 -40 to +55
*6D 560 M6D 110-EF 0° F 3~ 400 Y 50 615 0.30 0.52 — 40 -40 to +55 F1b)/F2b)
G 3~ 400 ∆ 50 890 0.43 0.90 — 90 -40 to +70
*6D 560 M6D 110-EF -5° H 3~ 400 Y 50 660 0.28 0.48 — 50 -40 to +70 F1b)/F2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

1350 0.76 1.50 79


[Pa]

0,8 [in H O]

A 1
2

A 2 1330 0.84 1.60 79


200 3
A 3 1305 0.93 1.78 80
3 B 1 1085 0.53 0.89 76
A

B 2 1040 0.56 0.95 75


160
B 3 995 0.60 1.05 75
0,6

2 C 1 1385 0.99 2.33 80


C
C 2 1370 1.07 2.45 80
120
3 3 2
C 3 1355 1.17 2.53 81
D 1 1155 0.72 1.28 77
0,4

B D 2 1125 0.76 1.35 76


2 D
80 2
1 D 3 1080 0.80 1.45 77

1
0,2

1
40

0 1500 3000 4500 6000 [CFM]

2000 4000 6000 8000 10000 [m3/h]

-10˚ -5˚ 0˚

86
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 560-AF03 -01 W4D 560-GF03 -01 S4D 560-CF03 -01 S4D 560-AF03 -01 — — —
"A" A4D 560-AF03 -02 W4D 560-DF03 -02 — — S4D 560-BF03 -02 S4D 560-AF03 -02 —
"V" A4D 560-AB01 -01 W4D 560-GB01 -01 S4D 560-CB01 -01 S4D 560-AB01 -01 — — W4D 560-IB01 -01
"A" A4D 560-AB01 -02 W4D 560-DB01 -02 — — S4D 560-BB01 -02 S4D 560-AB01 -02 —
"V" A6D 560-AG03 -01 W6D 560-GG03 -01 S6D 560-CG03 -01 S6D 560-AG03 -01 — — W6D 560-IG03 -01
"A" A6D 560-AG03 -02 W6D 560-DG03 -02 — — S6D 560-BG03 -02 S6D 560-AG03 -02 —
"V" A6D 560-AH03 -01 W6D 560-GH03 -01 S6D 560-CH03 -01 S6D 560-AH03 -01 — — —

EC axial
S series
"A" A6D 560-AH03 -02 W6D 560-DH03 -02 — — S6D 560-BH03 -02 S6D 560-AH03 -02 —

Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

E 1 885 0.43 0.87 73


[Pa]

[in H O]
2

ESM
E 2 875 0.46 0.89 73
E 3 860 0.50 0.95 74
0,4

100
F 1 670 0.28 0.49 66
3
G F 2 645 0.29 0.50 66
615 0.30 0.52 66
EC-SYSTEMS
F 3

80 3
G 1 915 0.36 0.78 71
0,3

G 2 900 0.39 0.81 71


2
G 3 890 0.43 0.90 71
60 2
H 1 720 0.25 0.40 66
H
3
E H 2 695 0.26 0.42 65
0,2

Accessories

H 3 660 0.28 0.48 64


3
40 2
1
1
F 2
0,1

1
20 1
Technology

0 1250 2500 3750 5000 [CFM]

2000 4000 6000 8000 [m3/h]

-10˚ -5˚ 0˚
Contacts

87
Drawings Speed setting Motor protection Electr. connections
p. 90 ff. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 560

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

*4E 560 M4E 110-IA -5° A 1~ 230 50 1300 1.05 4.60 20.0 /400 110 -40 to +60 A2b)

*6E 560 M6E 110-GF -5° B 1~ 230 50 910 0.43 1.95 10.0 /450 90 -40 to +70 A2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

1330 0.97 4.21 79


[Pa]

[in H O]

A 1
2

A 2 1310 1.01 4.39 79


0,5

A 3 1300 1.05 4.60 79


120
3

100
0,4

2
80
0,3

60

1
0,2

40
0,1

20

0 1500 3000 4500 6000 [CFM]

2000 4000 6000 8000 10000 [m3/h]

-10˚ -5˚ 0˚

88
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A4E 560-AB01 -01 W4E 560-GB01 -01 S4E 560-CB01 -01 S4E 560-AB01 -01 — — W4E 560-IB01 -01
"A" A4E 560-AB01 -02 W4E 560-DB01 -02 — — S4E 560-BB01 -02 S4E 560-AB01 -02 —
"V" A6E 560-AE01 -01 W6E 560-GE01 -01 S6E 560-CE01 -01 S6E 560-AE01 -01 — — —
"A" A6E 560-AE01 -02 W6E 560-DE01 -02 — — S6E 560-BE01 -02 S6E 560-AE01 -02 —

EC axial
S series
Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

B 1 935 0.37 1.65 73


[Pa]

[in H O]
2

ESM
B 2 925 0.39 1.80 72
B 3 910 0.43 1.95 72
0,4

100 3

EC-SYSTEMS

80 B
0,3

2
60
0,2

Accessories

40

1
0,1

20
Technology

0 1250 2500 3750 5000 [CFM]

2000 4000 6000 8000 [m3/h]

-10˚ -5˚ 0˚
Contacts

89
Drawings Capacitor Speed setting Motor protection Electr. connections
p. 90 ff. p. 382 f. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 560, drawings for direction of air flow "V"

Type Mass
Without attachments [kg] c d g
A4D 560-AF03 -01 11.5 95.0 96.0 208.5
A4D 560-AB01 -01 13.5 105.0 113.0 223.5
A6D 560-AG03 -01 9.0 114.0 129.0 188.5
A6D 560-AH03 -01 9.0 105.0 113.0 188.5
A4E 560-AB01 -01 13.5 105.0 113.0 223.5
A6E 560-AE01 -01 11.5 105.0 113.0 208.5

Depth of screw
max. 12 mm
Cable gland

 "V"

Type Mass
With full square nozzle [kg]
W4D 560-GF03 -01 20.0
W4D 560-GB01 -01 21.5
W6D 560-GG03 -01 18.0
W6D 560-GH03 -01 18.0
W4E 560-GB01 -01 21.5
W6E 560-GE01 -01 20.0

 "V"

Type Mass
With guard grille for full nozzle [kg] s t
S4D 560-CF03 -01 14.0 95.0 144.0
6,5 S4D 560-CB01 -01 15.5 105.0 159.0
View X S6D 560-CG03 -01 12.0 114.0 124.0
S6D 560-CH03 -01 12.0 105.0 124.0
S4E 560-CB01 -01 15.5 105.0 159.0
S6E 560-CE01 -01 14.0 105.0 144.0

 "V"

90
information
General
AC axial fans
Type Mass
With guard grille for short nozzle [kg] u v
S4D 560-AF03 -01 15.5 35.0 84.0
S4D 560-AB01 -01 17.0 45.0 99.0
S6D 560-AG03 -01 13.5 54.0 64.0

AC axial
S series
S6D 560-AH03 -01 13.5 45.0 64.0
S4E 560-AB01 -01 17.0 45.0 99.0
S6E 560-AE01 -01 15.5 45.0 84.0

AC axial
K series
AC axial
A series
 "V"

Type Mass
In-line duct fan

EC axial fans
[kg]
W4D 560-IB01 -01 20.9
W6D 560-IG03 -01 16.4
W4E 560-IB01 -01 20.9

EC axial
S series
Q-motor
 "V"

ESM
EC-SYSTEMS
Accessories
Technology
Contacts

91
AC axial fans
S series, Ø 560, drawings for direction of air flow "A"

Type Mass
Without attachments [kg] c d g
A4D 560-AF03 -02 11.5 134.0 96.0 208.5
A4D 560-AB01 -02 13.5 142.0 113.0 223.5
A6D 560-AG03 -02 9.0 149.0 129.0 188.5
A6D 560-AH03 -02 9.0 142.0 113.0 188.5
A4E 560-AB01 -02 13.5 142.0 113.0 223.5
A6E 560-AE01 -02 11.5 142.0 113.0 208.5

Depth of screw
max. 12 mm
Cable gland

"A" 

Type Mass
With full square nozzle [kg]
W4D 560-DF03 -02 20.3
W4D 560-DB01 -02 21.8
W6D 560-DG03 -02 18.3
W6D 560-DH03 -02 18.3
W4E 560-DB01 -02 21.8
W6E 560-DE01 -02 20.3

"A" 

Type Mass
With guard grille for full nozzle [kg] s t
S4D 560-BF03 -02 14.0 134.0 124.0
S4D 560-BB01 -02 15.5 149.0 132.0
S6D 560-BG03 -02 12.0 114.0 139.0
S6D 560-BH03 -02 12.0 114.0 132.0
S4E 560-BB01 -02 15.5 149.0 132.0
S6E 560-BE01 -02 14.0 134.0 132.0

"A" 

92
information
General
AC axial fans
Type Mass
With guard grille for short nozzle [kg] u v
S4D 560-AF03 -02 14.5 59.0 69.0
S4D 560-AB01 -02 16.0 67.0 84.0
S6D 560-AG03 -02 12.5 74.0 49.0

AC axial
S series
S6D 560-AH03 -02 12.5 67.0 49.0
S4E 560-AB01 -02 16.0 67.0 84.0
S6E 560-AE01 -02 14.5 67.0 69.0

AC axial
K series
AC axial
A series
"A" 

EC axial fans
EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

93
AC axial fans
S series, Ø 630

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Die-cast aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

A 3~ 400 ∆ 50 1330 1.94 3.40 — 200 -40 to +65


*4D 630 M4D 138-HF -5° B 3~ 400 Y 50 1040 1.29 2.20 — 120 -40 to +65 F1b)/F2b)
C 3~ 400 ∆ 50 1360 1.62 3.02 — 200 -40 to +65
*4D 630 M4D 138-HF -10° D 3~ 400 Y 50 1120 1.12 1.87 — 130 -40 to +65 F1b)/F2b)
E 3~ 400 ∆ 50 1340 2.53 4.95 — 240 -40 to +60
*4D 630 M4D 138-LA 0° F 3~ 400 Y 50 1045 1.64 2.88 — 145 -40 to +60 F1b)/F2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

1350 1.66 3.03 79


[Pa]

[in H O]

A 1
2

220
A 2 1335 1.78 3.17 79
3
3
A 3 1330 1.94 3.40 81
0,8

200 B 1 1095 1.16 1.95 73


A
180
B 2 1065 1.22 2.04 73
B 3 1040 1.29 2.20 75
160
C 2 C 1 1390 1.29 2.58 80
0,6

140
C 2 1380 1.41 2.70 80
3
3
2 C 3 1360 1.62 3.02 83
120 B
D 1 1190 0.98 1.65 76
D D 2 1160 1.04 1.75 75
0,4

100 2 1
2 D 3 1120 1.12 1.87 78
80 1

1
60 1
0,2

40

20

0 2500 5000 7500 10000 [CFM]

4000 8000 12000 16000 [m3/h]

-10˚ -5˚ 0˚

94
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 630-AN01 -01 W4D 630-GN01 -01 S4D 630-CN01 -01 S4D 630-AN01 -01 — — W4D 630-IN01 -01
"A" A4D 630-AN01 -02 W4D 630-DN01 -02 — — S4D 630-BN01 -02 — —
"V" A4D 630-AO01 -01 W4D 630-GO01 -01 S4D 630-CO01 -01 S4D 630-AO01 -01 — — —
"A" A4D 630-AO01 -02 W4D 630-DO01 -02 — — S4D 630-BO01 -02 — —
"V" A4D 630-AJ01 -01 W4D 630-GJ01 -01 S4D 630-CJ01 -01 S4D 630-AJ01 -01 — — —
"A" A4D 630-AJ01 -02 W4D 630-DJ01 -02 — — S4D 630-BJ01 -02 — —

EC axial
S series
Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

1355 2.28 4.43 78


[Pa]

1,0 [in H O]

E 1
2

ESM
E 2 1345 2.40 4.63 79
3
E 3 1340 2.53 4.95 81
240
E F 1 1085 1.56 2.73 72
F 2 1065 1.61 2.82 73
0,8

200 1045 1.64 2.88 75


EC-SYSTEMS
F 3
2

160 3
0,6

1
120 2
Accessories
0,4

80 1
0,2

40
Technology

0 4000 8000 12000 [CFM]

4000 8000 12000 16000 20000 [m3/h]

-10˚ -5˚ 0˚
Contacts

95
Drawings Speed setting Motor protection Electr. connections
p. 96 ff. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 630, drawings for direction of air flow "V"

Type Mass
Without attachments [kg] c d g
A4D 630-AN01 -01 20.0 147.0 133.0 251.0
A4D 630-AO01 -01 20.0 142.0 118.0 251.0
A4D 630-AJ01 -01 24.0 152.0 147.0 276.0

Depth of screw
max. 18 mm
Cable gland

 "V"

Type Mass
With full square nozzle [kg]
W4D 630-GN01 -01 37.0
W4D 630-GO01 -01 37.0
W4D 630-GJ01 -01 41.0

 "V"

Type Mass
With guard grille for full nozzle [kg] s t
S4D 630-CN01 -01 28.0 146.0 175.0
68
S4D 630-CO01 -01 28.0 141.0 175.0
7,5

15,5
26
10

View X S4D 630-CJ01 -01 32.0 76.0 151.0

92

 "V"

96
information
General
AC axial fans
Type Mass
With guard grille for short nozzle [kg] u v
S4D 630-AN01 -01 29.5 80.0 109.0
S4D 630-AO01 -01 29.5 75.0 109.0
S4D 630-AJ01 -01 33.5 85.0 134.0

AC axial
S series
AC axial
K series
AC axial
A series
 "V"

Type Mass
In-line duct fan

EC axial fans
[kg]
W4D 630-IN01 -01 27.9

EC axial
S series
Q-motor
 "V"

ESM
EC-SYSTEMS
Accessories
Technology
Contacts

97
AC axial fans
S series, Ø 630, drawings for direction of air flow "A"

Type Mass
Without attachments [kg] c d g
A4D 630-AN01 -02 20.0 175.0 133.0 251.0
A4D 630-AO01 -02 20.0 165.0 118.0 251.0
A4D 630-AJ01 -02 24.0 185.0 147.0 276.0

Depth of screw
Cable gland max. 18 mm

"A" 

Type Mass
With full square nozzle [kg]
W4D 630-DN01 -02 38.0
W4D 630-DO01 -02 38.0
W4D 630-DJ01 -02 42.0

"A" 

Type Mass
With guard grille for full nozzle [kg] s t
S4D 630-BN01 -02 29.0 126.0 127.0
S4D 630-BO01 -02 29.0 116.0 127.0
S4D 630-BJ01 -02 33.0 136.0 152.0

"A" 

98
99
Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial EC axial fans AC axial AC axial AC axial AC axial fans General
S series A series K series S series information
AC axial fans
S series, Ø 630

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

A 3~ 400 ∆ 50 890 0.61 1.26 — 105 -40 to +60


*6D 630 M6D 110-GF -5° B 3~ 400 Y 50 680 0.40 0.72 — 60 -40 to +60 F1b)/F2b)
C 3~ 400 ∆ 50 910 0.53 1.15 — 110 -40 to +70
*6D 630 M6D 110-GF -10° D 3~ 400 Y 50 725 0.38 0.67 — 70 -40 to +70 F1b)/F2b)
E 3~ 400 ∆ 50 885 0.83 1.68 — 120 -40 to +55
*6D 630 M6D 110-IA 0° F 3~ 400 Y 50 655 0.53 0.95 — 68 -40 to +55 F1b)/F2b)
G 3~ 400 ∆ 50 640 0.38 0.91 — 62 -40 to +65
*8D 630 M8D 110-GF 0° H 3~ 400 Y 50 440 0.21 0.42 — 30 -40 to +65 F1b)/F2b)
I 3~ 400 ∆ 50 660 0.33 0.85 — 65 -40 to +75
*8D 630 M8D 110-GF -5° J 3~ 400 Y 50 500 0.20 0.40 — 35 -40 to +75 F1b)/F2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

925 0.48 1.12 75


[Pa]

0,5 [in H O]

A 1
2

A 2 915 0.52 1.16 75


A 3 890 0.61 1.26 76
120
3 3
B 1 770 0.35 0.63 72
3 B 2 745 0.37 0.66 71
100 E
0,4

B 3 680 0.40 0.72 71


C 1 940 0.41 1.04 75
A
3
C 2 930 0.45 1.06 75
80 D C
2
C 3 910 0.53 1.15 78
0,3

3
3 F
2
D 1 825 0.29 0.52 73
60 D 2 805 0.31 0.55 72
2 D 3 725 0.38 0.67 74
0,2

2
2 1 E 1 915 0.67 1.48 75
40 2
1
E 2 905 0.72 1.54 76
B E 3 885 0.83 1.68 76
11
0,1

1
1 F 1 735 0.47 0.83 71
20
F 2 710 0.49 0.86 71
F 3 655 0.53 0.95 70

0 1500 3000 4500 6000 [CFM]

2000 4000 6000 8000 10000 [m3/h]

-10˚ -5˚ 0˚

100
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A6D 630-AE01 -01 W6D 630-GE01 -01 S6D 630-CE01 -01 S6D 630-AE01 -01 — — —
"A" A6D 630-AE01 -02 W6D 630-DE01 -02 — — S6D 630-BE01 -02 S6D 630-AE01 -02 —
"V" A6D 630-AF01 -01 W6D 630-GF01 -01 S6D 630-CF01 -01 S6D 630-AF01 -01 — — —
"A" A6D 630-AF01 -02 W6D 630-DF01 -02 — — S6D 630-BF01 -02 S6D 630-AF01 -02 —
"V" A6D 630-AA01 -01 W6D 630-GA01 -01 S6D 630-CA01 -01 S6D 630-AA01 -01 — — W6D 630-IA01 -01
"A" A6D 630-AA01 -02 W6D 630-DA01 -02 — — S6D 630-BA01 -02 S6D 630-AA01 -02 —
"V" A8D 630-AD01 -01 W8D 630-GD01 -01 S8D 630-CD01 -01 S8D 630-AD01 -01 — — —

EC axial
S series
"A" A8D 630-AD01 -02 W8D 630-DD01 -02 — — S8D 630-BD01 -02 S8D 630-AD01 -02 —
"V" A8D 630-AE01 -01 W8D 630-GE01 -01 S8D 630-CE01 -01 S8D 630-AE01 -01 — — —
"A" A8D 630-AE01 -02 W8D 630-DE01 -02 — — S8D 630-BE01 -02 S8D 630-AE01 -02 —

Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

G 1 660 0.33 0.84 69


[Pa]

[in H O]
2

ESM
G 2 655 0.35 0.85 69
70 G 3 640 0.38 0.91 69
3
3 H 1 495 0.19 0.40 63
60 G H 2 475 0.20 0.41 62
440 0.21 0.42 61
EC-SYSTEMS
H 3
I
I 1 680 0.28 0.81 69
0,2

50
2 I 2 675 0.30 0.82 70
2 I 3 660 0.33 0.85 71
40
3 J 1 555 0.17 0.36 71
J
J 2 535 0.18 0.38 71
Accessories

3
30 J 3 500 0.20 0.40 71
2
H 1
0,1

2
1
20

10
Technology

0 1250 2500 3750 5000 [CFM]

2000 4000 6000 8000 [m3/h]

-10˚ -5˚ 0˚
Contacts

101
Drawings Speed setting Motor protection Electr. connections
p. 104 ff. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 630

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Sheet aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"
clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

*6E 630 M6E 110-GF -5° A 1~ 230 50 880 0.61 2.65 14.0 /450 100 -40 to +60 A2b)

*6E 630 M6E 110-GF -10° B 1~ 230 50 905 0.49 2.15 12.0 /450 100 -40 to +70 A2b)

*6E 630 M6E 110-IA 0° C 1~ 230 50 860 0.76 3.35 16.0 /450 100 -40 to +50 A2b)

*8E 630 M8E 110-GF -5° D 1~ 230 50 655 0.35 1.79 7.0 /450 60 -40 to +60 A2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

905 0.55 2.41 75


[Pa]

[in H O]

A 1
2

A 2 895 0.58 2.51 75


3
3 3 A 3 880 0.61 2.65 76
100
0,4

B 1 925 0.43 1.89 75


2

C
B 2 920 0.45 1.99 76
2 B 3 905 0.49 2.15 78
B
80
C 1 890 0.71 3.11 76
0,3

2 C 2 875 0.73 3.23 76


1
C 3 860 0.76 3.35 76
60 A

1
0,2

1
40
0,1

20

0 1500 3000 4500 6000 [CFM]

2000 4000 6000 8000 10000 [m3/h]

-10˚ -5˚ 0˚

102
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A6E 630-AE01 -01 W6E 630-GE01 -01 S6E 630-CE01 -01 S6E 630-AE01 -01 — — —
"A" A6E 630-AE01 -02 W6E 630-DE01 -02 — — S6E 630-BE01 -02 S6E 630-AE01 -02 —
"V" A6E 630-AF01 -01 W6E 630-GF01 -01 S6E 630-CF01 -01 S6E 630-AF01 -01 — — —
"A" A6E 630-AF01 -02 W6E 630-DF01 -02 — — S6E 630-BF01 -02 S6E 630-AF01 -02 —
"V" A6E 630-AA03 -01 W6E 630-GA03 -01 S6E 630-CA03 -01 S6E 630-AA03 -01 — — W6E 630-IA03 -01
"A" A6E 630-AA03 -02 W6E 630-DA03 -02 — — S6E 630-BA03 -02 S6E 630-AA03 -02 —
"V" A8E 630-AE01 -01 W8E 630-GE01 -01 S8E 630-CE01 -01 S8E 630-AE01 -01 — — —

EC axial
S series
"A" A8E 630-AE01 -02 W8E 630-DE01 -02 — — S8E 630-BE01 -02 S8E 630-AE01 -02 —

Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

D 1 685 0.30 1.61 69


[Pa]

[in H O]
2

ESM
D 2 675 0.32 1.68 69
70 D 3 655 0.35 1.79 69

3
60
EC-SYSTEMS

D
0,2

50

2
40
Accessories

30
0,1

1
20

10
Technology

0 1250 2500 3750 5000 [CFM]

2000 4000 6000 8000 [m3/h]

-10˚ -5˚ 0˚
Contacts

103
Drawings Capacitor Speed setting Motor protection Electr. connections
p. 104 ff. p. 382 f. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 630, drawings for direction of air flow "V"

Type Mass
Without attachments [kg] c d g
A6D 630-AE01 -01 12.5 108.0 116.0 208.5
A6D 630-AF01 -01 12.5 96.0 96.0 208.5
A6D 630-AA01 -01 14.0 120.0 135.0 223.5
A8D 630-AD01 -01 12.5 120.0 135.0 208.5
A8D 630-AE01 -01 12.5 108.0 116.0 208.5
A6E 630-AE01 -01 12.5 108.0 116.0 208.5
A6E 630-AF01 -01 12.5 96.0 96.0 208.5
A6E 630-AA03 -01 14.0 120.0 135.0 223.5
A8E 630-AE01 -01 12.5 108.0 116.0 208.5

Depth of screw
max. 12 mm
Cable gland

 "V"

Type Mass
With full square nozzle [kg]
W6D 630-GE01 -01 20.5
W6D 630-GF01 -01 20.5
W6D 630-GA01 -01 23.0
W8D 630-GD01 -01 20.5
W8D 630-GE01 -01 20.5
W6E 630-GE01 -01 20.5
W6E 630-GF01 -01 20.5
W6E 630-GA03 -01 23.0
W8E 630-GE01 -01 20.5

 "V"

Type Mass
With guard grille for full nozzle [kg] s t
S6D 630-CE01 -01 14.5 97.5 111.5
6,5 S6D 630-CF01 -01 14.5 85.5 111.5
View X S6D 630-CA01 -01 17.0 109.5 126.5
S8D 630-CD01 -01 14.5 109.5 133.5
S8D 630-CE01 -01 14.5 97.5 111.5
S6E 630-CE01 -01 14.5 97.5 133.5
S6E 630-CF01 -01 14.5 85.5 111.5
S6E 630-CA03 -01 17.0 109.5 148.5
S8E 630-CE01 -01 14.5 97.5 133.5

 "V"

104
information
General
AC axial fans
Type Mass
With guard grille for short nozzle [kg] u v
S6D 630-AE01 -01 16.0 23.0 59.0
S6D 630-AF01 -01 16.0 11.0 59.0
S6D 630-AA01 -01 18.5 35.0 74.0

AC axial
S series
S8D 630-AD01 -01 16.0 35.0 59.0
S8D 630-AE01 -01 16.0 23.0 59.0
S6E 630-AE01 -01 16.0 23.0 59.0
S6E 630-AF01 -01 16.0 11.0 59.0
S6E 630-AA03 -01 18.5 35.0 74.0
S8E 630-AE01 -01 16.0 23.0 59.0

AC axial
K series
AC axial
A series
 "V"

Type Mass
In-line duct fan

EC axial fans
[kg]
W6D 630-IA01 -01 21.4
W6E 630-IA03 -01 21.4

EC axial
S series
Q-motor
 "V"

ESM
EC-SYSTEMS
Accessories
Technology
Contacts

105
AC axial fans
S series, Ø 630, drawings for direction of air flow "A"

Type Mass
Without attachments [kg] c d g
A6D 630-AE01 -02 12.5 142.0 116.0 208.5
A6D 630-AF01 -02 12.5 134.0 96.0 208.5
A6D 630-AA01 -02 14.0 149.0 135.0 223.5
A8D 630-AD01 -02 12.5 149.0 135.0 208.5
A8D 630-AE01 -02 12.5 142.0 116.0 208.5
A6E 630-AE01 -02 12.5 142.0 116.0 208.5
A6E 630-AF01 -02 12.5 134.0 96.0 208.5
A6E 630-AA03 -02 14.0 149.0 135.0 223.5
A8E 630-AE01 -02 12.5 142.0 116.0 208.5

Depth of screw
max. 12 mm
Cable gland

"A" 

Type Mass
With full square nozzle [kg]
W6D 630-DE01 -02 21.0
W6D 630-DF01 -02 21.0
W6D 630-DA01 -02 23.5
W8D 630-DD01 -02 21.0
W8D 630-DE01 -02 21.0
W6E 630-DE01 -02 21.0
W6E 630-DF01 -02 21.0
W6E 630-DA03 -02 23.5
W8E 630-DE01 -02 21.0

"A" 

Type Mass
With guard grille for full nozzle [kg] s t
S6D 630-BE01 -02 14.5 164.0 162.0
S6D 630-BF01 -02 14.5 164.0 154.0
S6D 630-BA01 -02 17.0 179.0 169.0
S8D 630-BD01 -02 14.5 164.0 169.0
S8D 630-BE01 -02 14.5 164.0 162.0
S6E 630-BE01 -02 14.5 164.0 162.0
S6E 630-BF01 -02 14.5 164.0 154.0
S6E 630-BA03 -02 17.0 179.0 169.0
S8E 630-BE01 -02 14.5 164.0 162.0

"A" 

106
information
General
AC axial fans
Type Mass
With guard grille for short nozzle [kg] u v
S6D 630-AE01 -02 15.0 92.0 94.0
S6D 630-AF01 -02 15.0 84.0 94.0
S6D 630-AA01 -02 17.5 99.0 109.0

AC axial
S series
S8D 630-AD01 -02 15.0 99.0 94.0
S8D 630-AE01 -02 15.0 92.0 94.0
S6E 630-AE01 -02 15.0 92.0 94.0
S6E 630-AF01 -02 15.0 84.0 94.0
S6E 630-AA03 -02 17.5 99.0 109.0
S8E 630-AE01 -02 15.0 92.0 94.0

AC axial
K series
AC axial
A series
"A" 

EC axial fans
EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

107
AC axial fans
S series, Ø 710

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Die-cast aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

A 3~ 400 ∆ 50 1350 2.32 4.65 — 280 -40 to +70


*4D 710 M4D 138-LA -10° B 3~ 400 Y 50 1090 1.59 2.78 — 180 -40 to +70 F1b)/F2b)
C 3~ 400 ∆ 50 910 1.01 2.40 — 130 -40 to +80
*6D 710 M6D 138-HF -5° D 3~ 400 Y 50 750 0.70 1.33 — 87 -40 to +80 F1b)/F2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

1380 1.96 4.13 82


[Pa]

[in H O]

A 1
2

3 A 2 1360 2.21 4.49 86


A 3 1350 2.32 4.65 87
1,0

250 2
B 1 1160 1.43 2.50 78
A B 2 1110 1.55 2.70 80
B 3 1090 1.59 2.78 81
0,8

200

2
0,6

150 1
B

1
0,4

100
0,2

50

0 2000 4000 6000 8000 10000 12000 [CFM]

4000 8000 12000 16000 20000 [m3/h]

-10˚ -5˚ 0˚

108
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A4D 710-AL01 -01 W4D 710-GL01 -01 S4D 710-CL01 -01 S4D 710-AL01 -01 — — W4D 710-IL01 -01
"A" A4D 710-AL01 -02 W4D 710-DL01 -02 — — S4D 710-BL01 -02 — —
"V" A6D 710-AN01 -01 W6D 710-GN01 -01 S6D 710-CN01 -01 S6D 710-AN01 -01 — — W6D 710-IN01 -01
"A" A6D 710-AN01 -02 W6D 710-DN01 -02 — — S6D 710-BN01 -02 — —

EC axial
S series
Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

925 0.91 2.32 72


[Pa]

[in H O]

C 1
2

ESM
C 2 920 0.97 2.38 75
140 C 3 910 1.01 2.40 77
3
D 1 780 0.65 1.22 69
0,5

120
D 2 765 0.68 1.27 71
2
750 0.70 1.33 72
EC-SYSTEMS
D 3

C
0,4

100
3
1
80 2
0,3

D
Accessories

60 1
0,2

40
0,1

20
Technology

0 2500 5000 7500 10000 [CFM]

4000 8000 12000 16000 [m3/h]

-10˚ -5˚ 0˚
Contacts

109
Drawings Speed setting Motor protection Electr. connections
p. 110 ff. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 710, drawings for direction of air flow "V"

Type Mass
Without attachments [kg] g
A4D 710-AL01 -01 25.0 276.0
A6D 710-AN01 -01 21.0 251.0

Depth of screw
max. 18 mm
Cable gland

 "V"

Type Mass
With full square nozzle [kg]
W4D 710-GL01 -01 43.0
W6D 710-GN01 -01 39.0

 "V"

Type Mass
With guard grille for full nozzle [kg] t
S4D 710-CL01 -01 34.0 193.5
68
S6D 710-CN01 -01 30.0 168.5
7,5

15,5
26
10

View X

92

 "V"

110
information
General
AC axial fans
Type Mass
With guard grille for short nozzle [kg] u v
S4D 710-AL01 -01 35.5 31.0 90.0
S6D 710-AN01 -01 31.5 27.0 65.0

AC axial
S series
AC axial
K series
AC axial
A series
 "V"

Type Mass
In-line duct fan

EC axial fans
[kg]
W4D 710-IL01 -01 40.0
W6D 710-IN01 -01 36.0

EC axial
S series
Q-motor
 "V"

ESM
EC-SYSTEMS
Accessories
Technology
Contacts

111
AC axial fans
S series, Ø 710, drawings for direction of air flow "A"

Type Mass
Without attachments [kg] g
A4D 710-AL01 -02 25.0 276.0
A6D 710-AN01 -02 21.0 251.0

Depth of screw
Cable gland max. 18 mm

"A" 

Type Mass
With full square nozzle [kg]
W4D 710-DL01 -02 44.0
W6D 710-DN01 -02 40.0

"A" 

Type Mass
With guard grille for full nozzle [kg] s t
S4D 710-BL01 -02 35.0 144.0 160.0
S6D 710-BN01 -02 32.0 154.0 155.0

"A" 

112
113
Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial EC axial fans AC axial AC axial AC axial AC axial fans General
S series A series K series S series information
AC axial fans
S series, Ø 800

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Die-cast aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

A 3~ 400 ∆ 50 870 1.45 3.20 — 150 -40 to +60


*6D 800 M6D 138-HF -5° B 3~ 400 Y 50 610 0.81 1.64 — 75 -40 to +60 F1b)/F2b)
C 3~ 400 ∆ 50 895 1.14 2.45 — 160 -40 to +75
*6D 800 M6D 138-HF -10° D 3~ 400 Y 50 710 0.75 1.45 — 98 -40 to +75 F1b)/F2b)
E 3~ 400 ∆ 50 895 2.00 4.30 — 180 -40 to +60
*6D 800 M6D 138-LA 0° F 3~ 400 Y 50 685 1.27 2.50 — 100 -40 to +60 F1b)/F2b)
G 3~ 400 ∆ 50 910 2.18 5.17 — 120 -40 to +55
*6D 800 M6D 138-NA +5° H 3~ 400 Y 50 730 1.47 2.80 — 75 -40 to +55 F1b)/F2b)
I 3~ 400 ∆ 50 915 2.08 4.62 — 180 -40 to +60
*6D 800 M6D 138-NA 0° J 3~ 400 Y 50 740 1.43 2.66 — 118 -40 to +60 F1b)/F2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

910 1.07 2.50 72


[Pa]

[in H O]

A 1
2

A 2 890 1.23 2.69 72


3
180 A 3 870 1.45 3.20 74

3 E
B 1 745 0.72 1.35 68
160
B 2 690 0.79 1.49 66
0,6

140
C
A
B 3 610 0.81 1.64 67
2 2 C 1 920 0.94 2.29 74
120 C 2 910 1.04 2.40 75
C 3 895 1.14 2.45 78
3 2
0,4

100 3 D 1 770 0.66 1.24 70


2 F 1
D 2 735 0.71 1.34 70
80 3 2
D 3 710 0.75 1.45 71

2
E 1 915 1.55 3.48 71
60 1 B
1 E 2 900 1.75 3.72 72
0,2

40 1
E 3 895 2.00 4.30 78
1
D F 1 750 1.08 2.02 68
1
20 F 2 705 1.16 2.17 67
F 3 685 1.27 2.50 72

0 4000 8000 12000 16000 [CFM]

5000 10000 15000 20000 25000 [m3/h]

-10˚ -5˚ 0˚

114
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A6D 800-AN01 -01 W6D 800-GN01 -01 S6D 800-CN01 -01 S6D 800-AN01 -01 — — —
"A" A6D 800-AN01 -02 W6D 800-DN01 -02 — — S6D 800-BN01 -02 — —
"V" A6D 800-AO01 -01 W6D 800-GO01 -01 S6D 800-CO01 -01 S6D 800-AO01 -01 — — —
"A" A6D 800-AO01 -02 W6D 800-DO01 -02 — — S6D 800-BO01 -02 — —
"V" A6D 800-AJ01 -01 W6D 800-GJ01 -01 S6D 800-CJ01 -01 S6D 800-AJ01 -01 — — W6D 800-IJ01 -01
"A" A6D 800-AJ01 -02 W6D 800-DJ01 -02 — — S6D 800-BJ01 -02 — —
"V" A6D 800-AS01 -01 W6D 800-GS01 -01 S6D 800-CS01 -01 S6D 800-AS01 -01 — — —

EC axial
S series
"A" A6D 800-AS01 -02 W6D 800-DS01 -02 — — S6D 800-BS01 -02 — —
"V" A6D 800-AP01 -01 W6D 800-GP01 -01 S6D 800-CP01 -01 S6D 800-AP01 -01 — — —
"A" A6D 800-AP01 -02 W6D 800-DP01 -02 — — S6D 800-BP01 -02 — —

Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

920 2.01 4.99 74


[Pa]

[in H O]

G 1
2

ESM
G 2 915 2.11 5.15 74
180 G 3 910 2.18 5.17 75
I
H 1 755 1.40 2.68 69
160
H 2 740 1.44 2.75 69
0,6

730 1.47 2.80 71


EC-SYSTEMS
H 3
140 2
I 1 940 1.63 4.26 72
3
120 J 3 I 2 925 1.85 4.47 73
G
I 3 915 2.08 4.62 79
0,4

100 J 1 810 1.22 2.25 69


2
2
J 2 775 1.33 2.44 70
Accessories

80 3 J 3 740 1.43 2.66 73

60 2
1
1
0,2

40 1
1
H
Technology

20

0 4000 8000 12000 16000 [CFM]

5000 10000 15000 20000 25000 [m3/h]

-10˚ -5˚ 0˚ +5˚


Contacts

115
Drawings Speed setting Motor protection Electr. connections
p. 118 ff. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 800

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Die-cast aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

A 3~ 400 ∆ 50 680 0.79 2.15 — 100 -40 to +55


*8D 800 M8D 138-HF -5° B 3~ 400 Y 50 540 0.48 1.05 — 60 -40 to +55 F1b)/F2b)
C 3~ 400 ∆ 50 665 1.05 2.70 — 80 -40 to +70
*8D 800 M8D 138-LA +5° D 3~ 400 Y 50 500 0.63 1.31 — 45 -40 to +70 F1b)/F2b)
E 3~ 400 ∆ 50 660 0.98 2.41 — 105 -40 to +65
*8D 800 M8D 138-LA 0° F 3~ 400 Y 50 515 0.57 1.21 — 57 -40 to +65 F1b)/F2b)
G 3~ 400 ∆ 50 435 0.37 1.15 — 44 -40 to +80
*ZD 800 MZD 138-HF 0° H 3~ 400 Y 50 330 0.20 0.48 — 25 -40 to +80 F1b)/F2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

700 0.60 2.08 67


[Pa]

[in H O]

A 1
2

A 2 690 0.68 2.10 67


3
A 3 680 0.79 2.15 71
100
0,4

3 E B 1 605 0.40 0.87 64


B 2 575 0.44 0.94 63
A
B 3 540 0.48 1.05 65
80
2 3 C 1 680 0.96 2.57 68
0,3

C
C 2 670 1.01 2.61 69
C 3 665 1.05 2.70 71
60 33 2
F 2 D 1 525 0.60 1.26 63
D 2 510 0.62 1.29 63
0,2

2 D 3 500 0.63 1.31 64


3
40 2
E 1 690 0.76 2.21 67
2 1
1 E 2 680 0.85 2.28 67
B E 3 660 0.98 2.41 71
0,1

1
20 1 1
1 F 1 560 0.50 1.06 63
F 2 530 0.54 1.13 62
D F 3 515 0.57 1.21 64

0 4000 8000 12000 [CFM]

4000 8000 12000 16000 20000 [m3/h]

-10˚ -5˚ 0˚ +5˚

116
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A8D 800-AN01 -01 W8D 800-GN01 -01 S8D 800-CN01 -01 S8D 800-AN01 -01 — — —
"A" A8D 800-AN01 -02 W8D 800-DN01 -02 — — S8D 800-BN01 -02 — —
"V" A8D 800-AT03 -01 W8D 800-GT03 -01 S8D 800-CT03 -01 S8D 800-AT03 -01 — — —
"A" A8D 800-AT03 -02 W8D 800-DT03 -02 — — S8D 800-BT03 -02 — —
"V" A8D 800-AJ01 -01 W8D 800-GJ01 -01 S8D 800-CJ01 -01 S8D 800-AJ01 -01 — — —
"A" A8D 800-AJ01 -02 W8D 800-DJ01 -02 — — S8D 800-BJ01 -02 — —
"V" AZD 800-AM03 -01 WZD 800-GM03 -01 SZD 800-CM03 -01 SZD 800-AM03 -01 — — —

EC axial
S series
"A" AZD 800-AM03 -02 WZD 800-DM03 -02 — — SZD 800-BM03 -02 — —

Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

455 0.31 1.09 59


[Pa]

[in H O]

G 1
2

ESM
G 2 445 0.33 1.10 58
45
3 G 3 435 0.37 1.15 61
G
40
H 1 375 0.17 0.43 55
H 2 360 0.18 0.45 55
0,15

330 0.20 0.48 55


EC-SYSTEMS
35 H 3

2
30

3
25
0,1

H
Accessories

2
20

15
1
0,05

10
1
Technology

0 2000 4000 6000 [CFM]

2000 4000 6000 8000 10000 12000 [m3/h]

-10˚ -5˚ 0˚
Contacts

117
Drawings Speed setting Motor protection Electr. connections
p. 118 ff. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 800, drawings for direction of air flow "V"

Type Mass
Without attachments [kg] c d g
A6D 800-AN01 -01 22.0 147.0 133.0 251.0
A6D 800-AO01 -01 22.0 142.0 118.0 251.0
A6D 800-AJ01 -01 26.0 152.0 147.0 276.0
A6D 800-AS01 -01 29.0 157.0 162.0 296.0
A6D 800-AP01 -01 29.0 152.0 147.0 296.0
A8D 800-AN01 -01 22.0 147.0 133.0 251.0
A8D 800-AT03 -01 26.0 157.0 162.0 276.0
A8D 800-AJ01 -01 26.0 152.0 147.0 276.0
AZD 800-AM03 -01 22.0 152.0 147.0 251.0

Depth of screw
max. 18 mm
Cable gland

 "V"

Type Mass
With full square nozzle [kg]
W6D 800-GN01 -01 42.0
W6D 800-GO01 -01 42.0
W6D 800-GJ01 -01 46.0
W6D 800-GS01 -01 49.0
W6D 800-GP01 -01 49.0
W8D 800-GN01 -01 42.0
W8D 800-GT03 -01 46.0
W8D 800-GJ01 -01 46.0
WZD 800-GM03 -01 42.0

 "V"

Type Mass
With guard grille for full nozzle [kg] s t
S6D 800-CN01 -01 32.0 136.5 165.5
68
S6D 800-CO01 -01 32.0 131.5 165.5
7,5

15,5
26
15

View X S6D 800-CJ01 -01 36.0 141.5 190.5


S6D 800-CS01 -01 39.0 146.5 210.5
92
S6D 800-CP01 -01 39.0 141.5 210.5
S8D 800-CN01 -01 32.0 136.5 165.5
S8D 800-CT03 -01 36.0 146.5 190.5
S8D 800-CJ01 -01 36.0 141.5 190.5
SZD 800-CM03 -01 32.0 141.5 165.5

 "V"

118
information
General
AC axial fans
Type Mass
With guard grille for short nozzle [kg] u v
S6D 800-AN01 -01 34.0 17.0 51.0
S6D 800-AO01 -01 34.0 17.0 51.0
S6D 800-AJ01 -01 38.0 27.0 76.0

AC axial
S series
S6D 800-AS01 -01 41.0 32.0 96.0
S6D 800-AP01 -01 41.0 27.0 96.0
S8D 800-AN01 -01 34.0 22.0 51.0
S8D 800-AT03 -01 38.0 32.0 76.0
S8D 800-AJ01 -01 38.0 27.0 76.0
SZD 800-AM03 -01 34.0 17.0 51.0

AC axial
K series
AC axial
A series
 "V"

Type Mass
In-line duct fan

EC axial fans
[kg]
W6D 800-IJ01 -01 43.8

EC axial
S series
Q-motor
 "V"

ESM
EC-SYSTEMS
Accessories
Technology
Contacts

119
AC axial fans
S series, Ø 800, drawings for direction of air flow "A"

Type Mass
Without attachments [kg] c d g
A6D 800-AN01 -02 22.0 175.0 133.0 251.0
A6D 800-AO01 -02 22.0 165.0 188.0 251.0
A6D 800-AJ01 -02 26.0 185.0 147.0 276.0
A6D 800-AS01 -02 29.0 194.0 162.0 296.0
A6D 800-AP01 -02 29.0 185.0 147.0 296.0
A8D 800-AN01 -02 22.0 175.0 133.0 251.0
A8D 800-AT03 -02 26.0 194.0 162.0 276.0
A8D 800-AJ01 -02 26.0 185.0 147.0 276.0
AZD 800-AM03 -02 22.0 185.0 147.0 251.0

Depth of screw
Cable gland max. 18 mm

"A" 

Type Mass
With full square nozzle [kg]
W6D 800-DN01 -02 43.5
W6D 800-DO01 -02 43.5
W6D 800-DJ01 -02 47.5
W6D 800-DS01 -02 50.5
W6D 800-DP01 -02 50.5
W8D 800-DN01 -02 43.5
W8D 800-DT03 -02 47.5
W8D 800-DJ01 -02 47.5
WZD 800-DM03 -02 43.5

"A" 

Type Mass
With guard grille for full nozzle [kg] s t
S6D 800-BN01 -02 33.0 172.0 173.0
S6D 800-BO01 -02 33.0 162.0 173.0
S6D 800-BJ01 -02 37.0 182.0 198.0
S6D 800-BS01 -02 40.0 191.0 218.0
S6D 800-BP01 -02 40.0 182.0 218.0
S8D 800-BN01 -02 34.0 172.0 173.0
S8D 800-BT03 -02 37.0 191.0 198.0
S8D 800-BJ01 -02 37.0 182.0 198.0
SZD 800-BM03 -02 34.0 182.0 173.0

"A" 

120
121
Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial EC axial fans AC axial AC axial AC axial AC axial fans General
S series A series K series S series information
AC axial fans
S series, Ø 910

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Die-cast aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

A 3~ 400 ∆ 50 880 1.30 2.75 — 150 -40 to +60


*6D 910 M6D 138-HF -10° B 3~ 400 Y 50 670 0.81 1.56 — 85 -40 to +60 F1b)/F2b)
C 3~ 400 ∆ 50 900 1.84 3.76 — 150 -40 to +60
*6D 910 M6D 138-LA -5° D 3~ 400 Y 50 700 1.20 2.24 — 88 -40 to +60 F1b)/F2b)
E 3~ 400 ∆ 50 930 1.41 3.20 — 165 -40 to +75
*6D 910 M6D 138-LA -10° F 3~ 400 Y 50 780 1.03 1.90 — 115 -40 to +75 F1b)/F2b)
G 3~ 400 ∆ 50 890 2.45 5.20 — 160 -40 to +50
*6D 910 M6D 138-NA 0° H 3~ 400 Y 50 685 1.56 2.90 — 95 -40 to +50 F1b)/F2b)
I 3~ 400 ∆ 50 920 1.96 4.50 — 170 -40 to +60
*6D 910 M6D 138-NA -5° J 3~ 400 Y 50 760 1.37 2.55 — 115 -40 to +60 F1b)/F2b)
K 3~ 400 ∆ 50 940 1.53 4.45 — 170 -40 to +70
*6D 910 M6D 138-NA -10° L 3~ 400 Y 50 830 1.14 2.15 — 130 -40 to +70 F1b)/F2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

910 1.06 2.56 77


[Pa]

[in H O]

A 1
2

E 3
A 2 890 1.21 2.72 78
160
3 A 3 880 1.30 2.75 82
0,6

3
C B 1 740 0.72 1.36 72
140
B 2 700 0.78 1.47 72
F
A 2
B 3 670 0.81 1.56 74
2
120 3
2 C 1 920 1.59 3.51 76
C 2 910 1.72 3.67 77
0,4

100 C 3 900 1.84 3.76 79


3 2
1
3
D 1 745 1.10 2.01 71
80
2 D 2 720 1.15 2.11 71
B
2 D 3 700 1.20 2.24 72
1 1
60
1 E 1 945 1.11 2.91 78
0,2

1 E 2 935 1.27 3.08 79


40 1
E 3 930 1.41 3.20 83
F 1 840 0.85 1.56 75
20 F 2 805 0.96 1.74 75
D
F 3 780 1.03 1.90 78

0 4000 8000 12000 16000 [CFM]

5000 10000 15000 20000 25000 [m3/h]

-10˚ -5˚ 0˚

122
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A6D 910-AO01 -01 W6D 910-GO01 -01 S6D 910-CO01 -01 S6D 910-AO01 -01 — — —
"A" A6D 910-AO01 -02 W6D 910-DO01 -02 — — S6D 910-BO01 -02 — —
"V" A6D 910-AK01 -01 W6D 910-GK01 -01 S6D 910-CK01 -01 S6D 910-AK01 -01 — — —
"A" A6D 910-AK01 -02 W6D 910-DK01 -02 — — S6D 910-BK01 -02 — —
"V" A6D 910-AL01 -01 W6D 910-GL01 -01 S6D 910-CL01 -01 S6D 910-AL01 -01 — — —
"A" A6D 910-AL01 -02 W6D 910-DL01 -02 — — S6D 910-BL01 -02 — —
"V" A6D 910-AP01 -01 W6D 910-GP01 -01 S6D 910-CP01 -01 S6D 910-AP01 -01 — — —

EC axial
S series
"A" A6D 910-AP01 -02 W6D 910-DP01 -02 — — S6D 910-BP01 -02 — —
"V" A6D 910-AQ01 -01 W6D 910-GQ01 -01 S6D 910-CQ01 -01 S6D 910-AQ01 -01 — — —
"A" A6D 910-AQ01 -02 W6D 910-DQ01 -02 — — S6D 910-BQ01 -02 — —
"V" A6D 910-AR01 -01 W6D 910-GR01 -01 S6D 910-CR01 -01 S6D 910-AR01 -01 — — —
"A" A6D 910-AR01 -02 W6D 910-DR01 -02 — — S6D 910-BR01 -02 — —

Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

920 1.99 4.65 76


[Pa]

[in H O]

G 1
2

ESM
G 2 905 2.24 4.95 76
180
3 3 G 3 890 2.45 5.20 79
3
160 H 1 760 1.39 2.57 72
G H 2 725 1.49 2.76 70
0,6

685 1.56 2.90 72


EC-SYSTEMS
140 K H 3
3 2
2 I 1 940 1.64 4.33 77
120 3 I 2 930 1.82 4.51 78
J
2 I 3 920 1.96 4.50 80
100 2 I
0,4

3
2 J 1 810 1.20 2.23 73
J 2 780 1.30 2.40 73
Accessories

80 1

1
J 3 760 1.37 2.55 75
L 2
60 1 H K 1 960 1.24 4.27 78
1
K 2 950 1.40 4.35 80
0,2

1
40 K 3 940 1.53 4.45 83
1
L 1 875 0.94 1.79 76
Technology

20 L 2 850 1.05 1.97 77


L 3 830 1.14 2.15 80

0 4000 8000 12000 16000 [CFM]

5000 10000 15000 20000 25000 30000 [m3/h]

-10˚ -5˚ 0˚
Contacts

123
Drawings Speed setting Motor protection Electr. connections
p. 126 ff. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 910

– Material: Guard grille: Steel, phosphated and coated in black plastic


Wall ring: Sheet steel, pre-galvanised and coated in black plastic
Blades: Die-cast aluminium
Rotor: Encased in aluminium
– Number of blades: 5
– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"
counter-clockwise, seen on rotor
– Type of protection: IP 54 (acc. to EN 60529)
– Insulation class: "F"
– Mounting position: Any
– Condensate discharge holes: On rotor and stator side
– Mode of operation: Continuous operation (S1)
– Bearings: Maintenance-free ball bearings

Max. operative range

Perm. amb. temp.

Electr. connection
Nominal voltage

Speed/rpm (1)

Max. current
Blade angle

Max. power
Frequency

Capacitor
draw (1)
input (1)
Curve

Nominal data
Type Motor VAC Hz rpm kW A µF/VDB Pa °C p. 416 f.

A 3~ 400 ∆ 50 645 0.85 2.09 — 90 -40 to +60


*8D 910 M8D 138-HF -5° B 3~ 400 Y 50 450 0.45 1.00 — 43 -40 to +60 F1b)/F2b)
C 3~ 400 ∆ 50 665 1.11 2.70 — 90 -40 to +65
*8D 910 M8D 138-LA 0° D 3~ 400 Y 50 495 0.68 1.36 — 50 -40 to +65 F1b)/F2b)
E 3~ 400 ∆ 50 425 0.42 1.15 — 40 -40 to +70
*ZD 910 MZD 138-HF 0° F 3~ 400 Y 50 315 0.22 0.50 — 21 -40 to +70 F1b)/F2b)
G 3~ 400 ∆ 50 430 0.32 0.86 — 42 -40 to +100
*ZD 910 MZD 138-HF -5° H 3~ 400 Y 50 320 0.17 0.40 — 22 -40 to +100 F1b)/F2b)
subject to alterations (1) Nominal data in operating point 3 with maximum load

n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

670 0.73 1.94 68


[Pa]

[in H O]

A 1
3 3
2

A 2 655 0.80 2.03 68


90
A 3 645 0.85 2.09 69

80
B 1 500 0.43 0.95 62
B 2 460 0.44 0.99 60
0,3

2
70 2
B 3 450 0.45 1.00 60
C C 1 685 0.94 2.49 69
60 C 2 675 1.03 2.57 69
A
3
C 3 665 1.11 2.70 71
50
0,2

D 1 540 0.62 1.23 64


3
2 1 1 D 2 515 0.65 1.30 63
40
B
D D 3 495 0.68 1.36 64
2

30
1
0,1

1
20

10

0 2000 4000 6000 8000 10000 12000 [CFM]

4000 8000 12000 16000 20000 [m3/h]

-10˚ -5˚ 0˚

124
information
General
AC axial fans
– Motor protection: Design with thermal overload protector
– Cable exit: Via terminal box
– Protection class: I (acc. to EN 61800-5-1)
– Product conforming to standard: CE
– Approvals: VDE (acc. to EN 60034)

AC axial
S series
AC axial
K series
Direction of air flow

AC axial
A series
 "V"/ "A"   "V"/ "A"   "V"  "V" "A"  "A"   "V"
Without With full With guard grille With guard grille With guard grille With guard grille In-line duct fan
attachments square nozzle for full nozzle for short nozzle for full nozzle for short nozzle

EC axial fans
"V" A8D 910-AN07 -01 W8D 910-GN07 -01 S8D 910-CN07 -01 S8D 910-AN07 -01 — — —
"A" A8D 910-AN07 -02 W8D 910-DN07 -02 — — S8D 910-BN07 -02 — —
"V" A8D 910-AJ03 -01 W8D 910-GJ03 -01 S8D 910-CJ03 -01 S8D 910-AJ03 -01 — — —
"A" A8D 910-AJ03 -02 W8D 910-DJ03 -02 — — S8D 910-BJ03 -02 — —
"V" AZD 910-AM03 -01 WZD 910-GM03 -01 SZD 910-CM03 -01 SZD 910-AM03 -01 — — —
"A" AZD 910-AM03 -02 WZD 910-DM03 -02 — — SZD 910-BM03 -02 — —
"V" AZD 910-AN05 -01 WZD 910-GN05 -01 SZD 910-CN05 -01 SZD 910-AN05 -01 — — —

EC axial
S series
"A" AZD 910-AN05 -02 WZD 910-DN05 -02 — — SZD 910-BN05 -02 — —

Q-motor
n P1 I LwA
Curves [rpm] [kW] [A] [dB(A)]

445 0.36 1.11 61


[Pa]

[in H O]

E 1
2

ESM
E 2 435 0.39 1.13 59
45
E 3 425 0.42 1.15 61
3

40
3 F 1 345 0.20 0.46 54
F 2 330 0.21 0.48 53
0,15

315 0.22 0.50 53


EC-SYSTEMS
35 F 3
G E
G 1 450 0.27 0.81 60
30 2 G 2 440 0.29 0.84 59
2

H
G 3 430 0.32 0.86 61
25
0,1

H 1 360 0.16 0.36 54


3
3 H 2 340 0.17 0.38 53
Accessories

F
20
1
H 3 320 0.17 0.40 53
2
2 1
15
0,05

1
10 1
Technology

0 2000 4000 6000 8000 [CFM]

2000 4000 6000 8000 10000 12000 14000 [m3/h]

-10˚ -5˚ 0˚
Contacts

125
Drawings Speed setting Motor protection Electr. connections
p. 126 ff. p. 384 f. p. 386 ff. p. 416 f.
AC axial fans
S series, Ø 910, drawings for direction of air flow "V"

Type Mass
Without attachments [kg] c d g
A6D 910-AO01 -01 22.0 147.0 104.0 251.0
A6D 910-AK01 -01 27.0 152.0 115.0 276.0
A6D 910-AL01 -01 27.0 147.0 104.0 276.0
A6D 910-AP01 -01 30.0 156.0 123.0 296.0
A6D 910-AQ01 -01 30.0 152.0 115.0 296.0
A6D 910-AR01 -01 30.0 147.0 104.0 296.0
A8D 910-AN07 -01 22.0 152.0 115.0 251.0
A8D 910-AJ03 -01 27.0 156.0 123.0 276.0
AZD 910-AM03 -01 22.0 157.0 123.0 251.0
AZD 910-AN05 -01 22.0 152.0 115.0 251.0

Depth of screw
max. 18 mm
Cable gland

 "V"

Type Mass
With full square nozzle [kg]
W6D 910-GO01 -01 42.0
W6D 910-GK01 -01 47.0
W6D 910-GL01 -01 47.0
W6D 910-GP01 -01 50.0
W6D 910-GQ01 -01 50.0
W6D 910-GR01 -01 50.0
W8D 910-GN07 -01 42.0
W8D 910-GJ03 -01 47.0
WZD 910-GM03 -01 42.0
WZD 910-GN05 -01 42.0

 "V"

Type Mass
With guard grille for full nozzle [kg] s t
S6D 910-CO01 -01 33.0 134.0 163.0
76
S6D 910-CK01 -01 38.0 139.0 188.0
10

20
29
15

View X S6D 910-CL01 -01 38.0 134.0 188.0


S6D 910-CP01 -01 41.0 143.0 208.0
116
S6D 910-CQ01 -01 41.0 139.0 208.0
S6D 910-CR01 -01 41.0 134.0 208.0
S8D 910-CN07 -01 33.0 139.0 163.0
S8D 910-CJ03 -01 38.0 143.0 188.0
SZD 910-CM03 -01 33.0 143.0 163.0
SZD 910-CN05 -01 33.0 139.0 163.0

 "V"

126
information
General
AC axial fans
Type Mass
With guard grille for short nozzle [kg] u v
S6D 910-AO01 -01 35.0 17.0 46.0
S6D 910-AK01 -01 40.0 22.0 71.0
S6D 910-AL01 -01 40.0 17.0 71.0

AC axial
S series
S6D 910-AP01 -01 43.0 26.0 91.0
S6D 910-AQ01 -01 43.0 22.0 91.0
S6D 910-AR01 -01 43.0 17.0 91.0
S8D 910-AN07 -01 35.0 22.0 46.0
S8D 910-AJ03 -01 40.0 26.0 71.0
SZD 910-CM03 -01 35.0 26.0 46.0

AC axial
K series
SZD 910-CN05 -01 35.0 22.0 46.0

AC axial
A series
 "V"

EC axial fans
EC axial
S series
Q-motor
ESM
EC-SYSTEMS
Accessories
Technology
Contacts

127
AC axial fans
S series, Ø 910, drawings for direction of air flow "A"

Type Mass
Without attachments [kg] c d g
A6D 910-AO01 -02 22.0 145.0 104.0 251.0
A6D 910-AK01 -02 27.0 154.0 115.0 276.0
A6D 910-AL01 -02 27.0 145.0 104.0 276.0
A6D 910-AP01 -02 30.0 157.0 123.0 296.0
A6D 910-AQ01 -02 30.0 154.0 115.0 296.0
A6D 910-AR01 -02 30.0 145.0 104.0 296.0
A8D 910-AN07 -02 22.0 154.0 115.0 251.0
A8D 910-AJ03 -02 27.0 157.0 123.0 276.0
AZD 910-AM03 -02 22.0 157.0 123.0 251.0
AZD 910-AN05 -02 22.0 154.0 115.0 251.0

Depth of screw
Cable gland max. 18 mm

"A" 

Type Mass
With full square nozzle [kg]
W6D 910-DO01 -02 43.5
W6D 910-DK01 -02 48.5
W6D 910-DL01 -02 48.5
W6D 910-DP01 -02 51.5
W6D 910-DQ01 -02 51.5
W6D 910-DR01 -02 51.5
W8D 910-DN07 -02 43.5
W8D 910-DJ03 -02 48.5
WZD 910-DM03 -02 43.5
WZD 910-DN05 -02 43.5

"A" 

Type Mass
With guard grille for full nozzle [kg] s t
S6D 910-BO01 -02 34.0 159.0 195.0
S6D 910-BK01 -02 39.0 168.0 215.0
S6D 910-BL01 -02 39.0 159.0 215.0
S6D 910-BP01 -02 42.0 171.0 235.0
S6D 910-BQ01 -02 42.0 168.0 235.0
S6D 910-BR01 -02 42.0 159.0 235.0
S8D 910-BN07 -02 34.0 168.0 195.0
S8D 910-BJ03 -02 39.0 171.0 215.0
SZD 910-BM03 -02 34.0 171.0 195.0
SZD 910-BN05 -02 34.0 168.0 195.0

"A" 

128
129
Contacts Technology Accessories EC-SYSTEMS ESM Q-motor EC axial EC axial fans AC axial AC axial AC axial AC axial fans General
S series A series K series S series information
130

You might also like