Scribd
Upload
35 views1 page

Tech Spect

This document provides technical specifications and mechanical properties for different types of fibreboard, including high density fibreboard (HDF) and medium density fibreboard (MDF). It lists physical properties such as thickness, density, bending strength, swelling, internal bond, screw holding, and surface absorption. The fibreboards are tested based on various British standards and specifications are provided for a range of thickness from 2mm to 30mm. Tolerances for dimensions, squareness, and edge straightness are also outlined.

Uploaded by

Liezl Fanoe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views1 page

Tech Spect

This document provides technical specifications and mechanical properties for different types of fibreboard, including high density fibreboard (HDF) and medium density fibreboard (MDF). It lists physical properties such as thickness, density, bending strength, swelling, internal bond, screw holding, and surface absorption. The fibreboards are tested based on various British standards and specifications are provided for a range of thickness from 2mm to 30mm. Tolerances for dimensions, squareness, and edge straightness are also outlined.

Uploaded by

Liezl Fanoe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Dongwha Specification Revison No 12

Technical Specifications & Mechanical Properties Revison Date 15-02-2020

Physical & Mechanical Properties of Fibreboard


Range of thickness (mm)
Product Type Mechanical Properties Test Method Unit
≥ 2.0 - 2.7 > 2.7 - 3.6 > 3.6 - 4.5 > 4.5 - 6.0 > 6.0 - 9.0 > 9.0 - 12.0 >12.0 - 15.0 >15.0 - 19.0 > 19.0 - 30.0
Standard Thickness BS EN 324-1 mm ±0.2
HDF Tolerances in
Nominal Dimensions mm a) within 5mm (length) & within 2mm (width) for free trim panel
Length and Width BS EN 324-1
b) +2 mm (width) and + 5mm (length) for nett size panel
Squareness Tolerances (Diagonal) BS EN 324-2 mm/m ≤ 5.0
Edge Straightness Tolerances BS EN 324-2 mm/m ≤1.5
Moisture Content BS EN 322 % 5-8
Density BS EN 323 kg/m3 Average 880 ±20 880 ±20 870 ±20 860 ±20 840 ±20 820 ±20 800 ±20 760 ±20 740 ±20
Bending Strength BS EN 310 N/mm² Min Ave ≥ 35 ≥ 35 ≥ 35 ≥ 30 ≥ 30 ≥ 30 ≥ 28 ≥ 28 ≥ 25
Swelling in Thickness (24 hour) BS EN 317 % Max Ave ≤ 30 ≤ 25 ≤ 25 ≤ 20 ≤ 15 ≤ 15 ≤ 10 ≤ 10 ≤8
Internal Bond BS EN 319 N/mm² Min Ave ≥ 1.20 ≥ 1.20 ≥ 1.20 ≥ 1.20 ≥ 1.20 ≥ 1.00 ≥ 1.00 ≥ 0.90 ≥ 0.90
Internal Bond BS EN 319 N/mm² Min Specimen ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80
Face BS EN 320 N NA NA NA NA NA NA 1050 1050 1050
Screw Holding Ave
Edge BS EN 320 N NA NA NA NA NA NA 850 850 850
Surface Absorption (Toluene) BS EN 382-1 in-house mm Min Premium ≥ 150 Premium ≥ 200
High Thickness BS EN 324-1 mm ±0.2
Tolerances in
Moisture Nominal Dimensions mm a) within 5mm (length) & within 2mm (width) for free trim panel
Length and Width BS EN 324-1
Resistance b) +2 mm (width) and + 5mm (length) for nett size panel
Squareness Tolerances (Diagonal) BS EN 324-2 mm/m ≤ 5.0
[HMR]
Edge Straightness Tolerances BS EN 324-2 mm/m ≤1.5
Moisture Content BS EN 322 % 5-8
Density BS EN 323 kg/m3 Average 880 ±20 880 ±20 870 ±20 860 ±20 840 ±20 820 ±20 760 ±20 750 ±20 740 ±20
Bending Strength BS EN 310 N/mm² Ave ≥ 35 ≥ 35 ≥ 35 ≥ 30 ≥ 30 ≥ 30 ≥ 28 ≥ 28 ≥ 25
Swelling in Thickness (24 hour) BS EN 317 % Max Ave ≤ 30 ≤ 20 ≤ 18 ≤ 15 ≤ 12 ≤ 10 ≤8 ≤8 ≤7
Internal Bond BS EN 319 N/mm² Ave ≥ 1.20 ≥ 1.20 ≥ 1.20 ≥ 1.20 ≥ 1.20 ≥ 1.00 ≥ 1.00 ≥ 0.90 ≥ 0.90
Internal Bond BS EN 319 N/mm² Min Specimen ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80
Face BS EN 320 N NA NA NA NA NA NA 1050 1050 1050
Screw Holding Ave
Edge BS EN 320 N NA NA NA NA NA NA 850 850 850
Surface Absorption (Toluene) BS EN 382-1 in-house mm Min Premium ≥ 150 Premium ≥ 200
Standard Thickness BS EN 324-1 mm ±0.2
MDF Tolerances in
Nominal Dimensions a) within 5mm (length) & within 2mm (width) for free trim panel
Length and Width BS EN 324-1 mm
b) +2 mm (width) and + 5mm (length) for nett size panel
Squareness Tolerances (Diagonal) BS EN 324-2 mm ≤ 5.0
Edge Straightness Tolerances BS EN 324-2 mm/m ≤1.5
Moisture Content BS EN 322 % 5-8
Density BS EN 323 kg/m3 Average 810±20 810±20 790±20 780±20 750±20 740±20 720±20 700±20 670±20
Bending Strength BS EN 310 N/mm² Min Ave ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 25 ≥ 25 ≥ 25
Swelling in Thickness (24 hour) BS EN 317 % Max Ave ≤ 35 ≤ 35 ≤ 35 ≤ 30 ≤ 17 ≤ 17 ≤ 15 ≤ 12 ≤ 10
Internal Bond BS EN 319 N/mm² Min Ave ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.80 ≥ 0.65 ≥ 0.65 ≥ 0.60 ≥ 0.60 ≥ 0.50
Internal Bond BS EN 319 N/mm² Min Specimen ≥ 0.70 ≥ 0.70 ≥ 0.70 ≥ 0.70 ≥ 0.55 ≥ 0.55 ≥ 0.50 ≥ 0.50 ≥ 0.45
Face BS EN 320 N NA NA NA NA NA NA 1050 1050 1000
Screw Holding Ave
Edge BS EN 320 N NA NA NA NA NA NA 850 850 700
Surface Absorption (Toluene) BS EN 382-1 in-house mm Min Premium ≥ 100 Premium ≥ 150
Moisture Thickness BS EN 324-1 mm ±0.2
Tolerances in
Resistance Nominal Dimensions mm a) within 5mm (length) & within 2mm (width) for free trim panel
Length and Width BS EN 324-1
[MMR] b) +2 mm (width) and + 5mm (length) for nett size panel
Squareness Tolerances (Diagonal) BS EN 324-2 mm ≤5
Edge Straightness Tolerances BS EN 324-2 mm/m ≤1.5
Moisture Content BS EN 322 % 5-8
Density BS EN 323 kg/m3 Average 830±30 810±20 790±20 780±20 760±20 740±20 720±20 700±20 670±20
Bending Strength BS EN 310 N/mm² Min Ave ≥ 35 ≥ 35 ≥ 35 ≥ 30 ≥ 30 ≥ 30 ≥ 28 ≥ 28 ≥ 25
Swelling in Thickness (24 hour) BS EN 317 % Max Ave ≤ 30 ≤ 20 ≤ 18 ≤ 15 ≤ 12 ≤ 10 ≤8 ≤8 ≤7
Internal Bond BS EN 319 N/mm² Ave ≥ 1.00 ≥ 1.00 ≥ 1.00 ≥ 0.70 ≥ 0.70 ≥ 0.70 ≥ 0.70 ≥ 0.70 ≥ 0.70
Internal Bond BS EN 319 N/mm² Min Specimen ≥ 0.70 ≥ 0.70 ≥ 0.70 ≥ 0.60 ≥ 0.60 ≥ 0.60 ≥ 0.60 ≥ 0.60 ≥ 0.60
Face BS EN 320 N NA NA NA NA NA NA 1050 1050 1000
Screw Holding Ave
Edge BS EN 320 N NA NA NA NA NA NA 850 850 700
Surface Absorption (Toluene) BS EN 382-1 in-house mm Min Premium ≥ 100 Premium ≥ 150
Fire Thickness BS EN 324-1 mm ±0.2
Tolerances in
Retardant Nominal Dimensions mm a) within 5mm (length) & within 2mm (width) for free trim panel
Length and Width BS EN 324-1
[MFR] b) +2 mm (width) and + 5mm (length) for nett size panel
Squareness Tolerances (Diagonal) BS EN 324-2 mm ≤5
Edge Straightness Tolerances BS EN 324-2 mm/m ≤1.5
Moisture Content BS EN 322 % 5-8
Density BS EN 323 kg/m3 Average ≥ 700 ≥ 700 ≥ 700
Bending Strength BS EN 310 N/mm² Min Ave ≥ 30 ≥ 28 ≥ 25
Swelling in Thickness (24 hour) BS EN 317 % Max Ave ≤ 17 ≤ 15 ≤ 12
Internal Bond BS EN 319 N/mm² Ave ≥ 0.70 ≥ 0.70 ≥ 0.65
Internal Bond BS EN 319 N/mm² Min Specimen ≥ 0.60 ≥ 0.60 ≥ 0.60
Face BS EN 320 N NA 1050 1050
Screw Holding Ave
Edge BS EN 320 N NA 850 850
Surface Absorption (Toluene) BS EN 382-1 in-house mm Min Premium ≥150
Fire Retardancy BS 476: Part 7 - - Class 1
Standard Thickness BS EN 324-1 mm ±0.2
LDF Tolerances in
Nominal Dimensions a) within 5mm (length) & within 2mm (width) for free trim panel
Length and Width BS EN 324-1 mm
b) +2 mm (width) and + 5mm (length) for nett size panel
Squareness Tolerances (Diagonal) BS EN 324-2 mm ≤ 5.0
Edge Straightness Tolerances BS EN 324-2 mm/m ≤1.5
Moisture Content BS EN 322 % 5-8
3
Density BS EN 323 kg/m 680±20 680±20 670±20 670±20 650±20
Bending Strength BS EN 310 N/mm² Min Ave ≥ 22 ≥ 22 ≥ 20 ≥ 20 ≥ 18
Swelling in Thickness (24 hour) BS EN 317 % Max Ave ≤ 20 ≤ 18 ≤ 14 ≤ 14 ≤ 12
Internal Bond BS EN 319 N/mm² Min Ave ≥ 0.60 ≥ 0.55 ≥ 0.50 ≥ 0.50 ≥ 0.45
Internal Bond BS EN 319 N/mm² Min Specimen ≥ 0.55 ≥ 0.50 ≥ 0.45 ≥ 0.45 ≥ 0.40
Surface Absorption (Toluene) BS EN 382-1 in-house mm Min Premium ≥ 100 Premium ≥150
Standard Thickness BS EN 324-1 mm ±0.2
IDF Tolerances in
Nominal Dimensions mm a) within 5mm (length) & within 2mm (width) for free trim panel
Length and Width BS EN 324-1
b) +2 mm (width) and + 5mm (length) for nett size panel
Squareness Tolerances (Diagonal) BS EN 324-2 mm ≤ 5.0
Edge Straightness Tolerances BS EN 324-2 mm/m ≤1.5
Moisture Content BS EN 322 % 5-8
Density BS EN 323 kg/m3 650±20 640±20 630±20 630±20 620±20
Bending Strength BS EN 310 N/mm² Min Ave ≥ 20 ≥ 18 ≥ 18 ≥ 18 ≥ 16
Swelling in Thickness (24 hour) BS EN 317 % Max Ave ≤ 25 ≤ 20 ≤ 20 ≤ 18 ≤ 16
Internal Bond BS EN 319 N/mm² Min Ave ≥ 0.50 ≥ 0.45 ≥ 0.45 ≥ 0.45 ≥ 0.40
Internal Bond BS EN 319 N/mm² Min Specimen ≥ 0.45 ≥ 0.40 ≥ 0.40 ≥ 0.40 ≥ 0.35
Surface Absorption (Toluene) BS EN 382-1 in-house mm Min Premium ≥ 100 Premium ≥150

Formaldehyde Emission of Fibreboard MDF


MFB
Properties Test method Unit Classification Standard Latex Free Lamination Grade Moisture Resistance
E1 ≤9.0 E1 ≤8.0 √ √ √ √
Perforator Method BS EN 120 mg/100g E2 > 9.0 ≤30 E2 > 8.0 ≤30 √ √ √ √
E3 >30 E3 >30 √ √ √ √
F****(SE0) :Ave ≤ 0.3 Max ≤0.4 - - - - -
F***(E0) :Ave ≤ 0.5 Max ≤0.7 √ √ √ √ √
Desiccators Method JIS A 1460 mg/L
F**(E1): Ave ≤1.5. Max ≤2.1 √ √ √ √ √
F*(E2) < 5 √ √ √ √ √
CARB Phase 2 MDF Thin Board ≤ 8mm ≤ 0.13 √ √ √ √ √
ASTM D6007-14 ppm
(Small Chamber method) Phase 2 MDF Thick Board ≥ 8.1mm ≤ 0.11 √ √ √ √ √
Note: The perforator values in this table apply to panels with moisture contents of 6.5%

You might also like