Rustler VXL (Model 37076) Parts List

Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars.

Bearings & Bushings 5186A Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball
bearings (4)/ axles (2)/ rubber tires (2) ........................................ $19.95
4607 Ball bearings (5x11x4mm) (8) ....................................................... $24.00 5186 Wheels, aluminum (red-anodized) (2)/ 5x8mm ball
2728 Ball bearings (5x8x2.5mm) (2) ..................................................... $8.00 bearings (4)/ axles (2)/ rubber tires (2) ........................................ $19.95
5116 Ball bearings, blue rubber sealed (5x11x4mm) (2) ......................... $3.50
5114 Ball bearings, blue rubber sealed (5x8x2.5mm) (2) ................... $4.00 Differential Components
2545 Bellcrank bushings (plastic) (5x8x2.5mm) (4) ................................. $3.00 2381X Main diff with steel ring gear/ side cover plate/ screws (Bandit,
3934 Body clips, heavy duty (12) ............................................................ $3.00 Stampede, Rustler) ........................................................................ $6.00
1675 Bushings, self-lubricating (5x11x4mm) (14)............................... $5.00 2382 Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear
1985 PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings) ... $2.00 alignment shaft (1) all hardened steel ............................................. $6.00
2388X Planetary gear differential with steel ring gear (complete) (fits
Body & Accessories Bandit, Stampede, Rustler) ............................................................ $15.00
1926 Antenna caps, vinyl (2)/ antenna spool ...................................... $2.00 5169 Screws, 2.6x8mm countersunk machine (6) ................................... $2.00
1726 Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)......... $1.00 1647 Silicone grease ............................................................................... $2.00
1834
1914R
Body clips (12) (standard size) .......................................................
Body mount, front & rear (black)/ body posts, 52mm (2),
$2.00
Driveline Components
38mm (2), 25mm (2), 6.5mm (2)/ body post extensions (2)/ 4628R Differential output yokes, black (2)/ 3x5mm countersunk
hardware ........................................................................................ $6.00 screws (2)/ screw pin (2) ................................................................ $4.00
3614 Body mounts (front & rear).......................................................... $5.00 4628X Differential output yokes, hardened steel (w/ U-joints) (2) ........ $19.50
1815 Body washers (8) ........................................................................... $2.00 6828X Differential output yokes, heavy duty (2)/ screw pin (2) ............ $4.00
3714 Body, Rustler (clear, requires painting)/window, lights decal 1951R Driveshafts, rear, steel-spline constant-velocity (complete
sheet/ wing and aluminum hardware .......................................... $25.00 assembly) (2) (fits 2WD Rustler/Stampede) ................................ $80.00
3715 Body, Rustler VXL, ProGraphix (replacement for the painted 1953 Half shaft pro-pack (internal-splined (6)/ external-
body. Graphics are printed, requires paint & final color splined (6) (plastic shafts only) ................................................... $10.00
application)/window, lights decal sheet/ wing and aluminum 6752 Half shaft, external splined (steel-spline constant-
hardware ....................................................................................... $34.99 velocity) (1) (fits 2WD Rustler/Stampede) ................................... $8.00
3615 Body, Stampede VXL, ProGraphix (replacement for the 6751 Half shaft, internal splined (steel-spline constant-velocity) (1). $6.00
painted body. Graphics are printed, requires paint & final 6850X Half shafts, heavy duty (external splined (2)/ internal
color application)/ window, grill, lights decal sheet .................. $34.99 splined (2))/ metal u-joints (4) ...................................................... $8.00
3617R Body, Stampede VXL, ProGraphix (replacement for the 1951 Half shafts, long truck (external-splined (2) & internal-splined (2)/
painted body. Graphics are printed, requires paint & final metal U-joints (4) ............................................................................ $6.00
color application)/ window, grill, lights decal sheet .................. $34.99 6757 Rebuild kit, steel-splined constant-velocity
2514 Decal sheet, racing sponsors...................................................... $3.00 driveshafts (includes pins, dustboots, lube, and hardware) ..... $18.00
3713R Decal sheets, Rustler VXL ............................................................. $11.00 3752 Stub axle carriers (2) (requires 5x11x4mm bearings) ..................... $3.00
5185 Tires, rubber (2) (fits Traxxas wheelie bar wheels) .................... $7.00 3652A Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
4974 Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4) ...... $10.00 aluminum (blue-anodized)/ 5x11mm ball bearings (4) ............... $35.00
3677A Wheelie bar mount (1) / hardware (green) .................................. $4.00 3652G Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
3677 Wheelie bar mount (1)/ hardware (black) ....................................... $4.00 aluminum (green-anodized)/ 5x11mm ball bearings (4)............. $35.00
3677X Wheelie bar mount (1)/ hardware (blue) ..................................... $4.00 3652X Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
3678 Wheelie bar, assembled (black) (fits Slash, Stampede, aluminum (red-anodized)/ 5x11mm ball bearings (4)................. $35.00
Rustler, Bandit series) ................................................................. $15.00 2754 Stub axle pins (4) ........................................................................... $1.00
3678X Wheelie bar, assembled (blue) (fits Slash, Stampede, Rustler, 6753 Stub axle, rear, steel-splined constant-velocity (1).................... $7.50
Bandit series) ............................................................................... $15.00 2753X Stub axles, rear (2) ......................................................................... $5.00
3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, 6853X Stub axles, rear, heavy duty (2)/pins (2) ..................................... $6.00

4976
Bandit series) ...............................................................................
Wheels (4)/ Axles (2), for Maxx wheelie bar................................
$15.00
$4.00
Front Suspension & Steering
3637 Axles (front) (2)............................................................................... $3.00
5186A Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball
2728 Ball bearings (5x8x2.5mm) (2) ..................................................... $8.00
bearings (4)/ axles (2)/ rubber tires (2) ........................................ $19.95
2545 Bellcrank bushings (plastic) (5x8x2.5mm) (4) ................................. $3.00
5186 Wheels, aluminum (red-anodized) (2)/ 5x8mm ball
bearings (4)/ axles (2)/ rubber tires (2) ........................................ $19.95 2530 Bulkhead (front) (black) ............................................................... $6.00
2530A Bulkhead (front) (grey).................................................................... $6.00
Chassis & Attachments 3632 Caster blocks (l&r) (30-degree) ...................................................... $4.00
3725X Battery expansion kit (allows for installation of taller multi- 3632A Caster blocks, 30-degree, blue-anodized 6061-T6
cell battery packs) ........................................................................ $6.00 aluminum (left & right)/ suspension screw pin (2) ..................... $24.00
3727 Battery hold-down plate (black)/ metal posts (2)/body 3632G Caster blocks, 30-degree, green-anodized 6061-T6
clips (2) ......................................................................................... $3.00 aluminum (left & right)/ suspension screw pin (2) ..................... $24.00
3727A Battery hold-down plate (grey) / metal posts (2) / body clips (2) ..... $3.00 3632X Caster blocks, 30-degree, red-anodized 6061-T6
3628 Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm aluminum (left & right)/ suspension screw pin (2) ..................... $24.00
CS (2) ............................................................................................ $12.00 5525R Rod ends, heavy duty (Jato/Slayer) (8) ....................................... $4.00
2735 Bumper (front) ................................................................................ $3.00 5347 Rod ends, Revo (large) with hollow balls (12)................................. $9.00
3722 Lower chassis (black) .................................................................. $15.00 3646 Screws, 3x15mm flat-head machine (hex drive) (6) ........................ $2.50
3722A Lower chassis (grey) ...................................................................... $15.00 3744 Servo saver w/ adapters ................................................................. $4.00
3725 Mounting plate, speed control (VXL-3s) (Bandit, Rustler, 3639 Shock tower (front) ......................................................................... $4.00
Stampede) ..................................................................................... $3.00 3736 Steering blocks, left & right (2) (requires 5x11x4mm bearings) ...... $3.00
3629 Seal kit, receiver box (includes o-ring, seals, and silicone grease) . $4.00 3636A Steering blocks, Rustler/Stampede/Bandit (2), 6061-T6
5185 Tires, rubber (2) (fits Traxxas wheelie bar wheels) .................... $7.00 aluminum (blue-anodized)/ 5x11mm ball bearings (4) ............... $35.00
3723 Upper chassis (black) .................................................................. $5.00 3636G Steering blocks, Rustler/Stampede/Bandit (2), 6061-T6
3723A Upper chassis (grey) ...................................................................... $5.00 aluminum (green-anodized)/ 5x11mm ball bearings (4)............. $35.00
4974 Wheelie bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4) ...... $10.00 3636X Steering blocks, Rustler/Stampede/Bandit (2), 6061-T6
3677A Wheelie bar mount (1) / hardware (green) .................................. $4.00 aluminum (red-anodized)/ 5x11mm ball bearings (4)................. $35.00
3677 Wheelie bar mount (1)/ hardware (black) ....................................... $4.00 3631 Suspension arms (front) (2) ............................................................ $8.00
3677X Wheelie bar mount (1)/ hardware (blue) ..................................... $4.00 2640 Suspension pins, 44mm (2) w/ E-clips ............................................ $2.50
3678 Wheelie bar, assembled (black) (fits Slash, Stampede, 3640 Suspension screw pin set, steel (hex drive) (requires part # 2640
Rustler, Bandit series) ................................................................. $15.00 for a complete suspension pin set) (Rustler, Stampede, Bandit) .... $4.50
3678X Wheelie bar, assembled (blue) (fits Slash, Stampede, Rustler, 2537 Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw ............... $2.50
Bandit series) ............................................................................... $15.00 2532 Tie bar, fiberglass ........................................................................... $4.00
3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, 3741A Turnbuckles, aluminum (blue-anodized), camber links, front,
Bandit series) ............................................................................... $15.00 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow
4976 Wheels (4)/ Axles (2), for Maxx wheelie bar................................ $4.00 balls)/ wrench ............................................................................... $22.00

For assistance, call 1-888-TRAXXAS, or e-mail Traxxas anytime at [email protected] REV. 140417 1630
Page 2 Rustler VXL: TQi Traxxas Link Enabled 2.4GHz Radio (Model 37076) Parts List

3139A Turnbuckles, aluminum (blue-anodized), toe links, 3355R VXL-3s Electronic Speed Control, waterproof (brushless)
59mm (2) (assembled w/ rod ends & hollow balls) (fits (fwd/rev/brake) .............................................................................. $220.00
Rustler) (requires 5mm aluminum wrench #5477) ..................... $12.00 3343 Wire, 12-gauge, silicone (Maxx Cable) (650mm or 26 inches)........ $6.00
3741X Turnbuckles, aluminum (red-anodized), camber links, front,
39mm (2), rear, 49mm (2) (assembled w/ rod ends & hollow Radio System, Batteries & Chargers
balls)/wrench ................................................................................ $22.00 2854 10000mAh 7.4v 2-Cell 25C LiPO Battery ..................................... $180.00
3139X Turnbuckles, aluminum (red-anodized), toe links, 2846 3300mah 11.1v 3-Cell 25C LiPO Battery ..................................... $80.00
59mm (2) (assembled with rod ends & hollow balls) (requires 2840 3300mah 7.4v 2-Cell 25C LiPO Battery ....................................... $66.99
5mm aluminum wrench #5477) ................................................... $12.00 2849 4000mah 11.1v 3-Cell 25C LiPO Battery ..................................... $100.00
3644 Turnbuckles, camber link, 39mm (69mm center to 2841 4000mah 7.4v 2-Cell 25C LiPO Battery ....................................... $82.99
center) (assembled with rod ends and hollow balls) (1 left, 1 right) $7.00 2843 5800mAh 7.4v 2-Cell 25C LiPO Battery ....................................... $100.00
3745 Turnbuckles, toe link, 59mm (78mm center to 2857 6400mAh 11.1v 3-Cell 25C LiPO Battery ..................................... $160.00
center) (2) (assembled with rod ends and hollow balls) .................. $8.75 2947 Balance board- XH ....................................................................... $10.00
Hardware 6548 Battery door, TQ 2.4 transmitter (replacement for #6516, 6517,
6528, 6529, 6530 transmitter) ........................................................ $4.00
1926 Antenna caps, vinyl (2)/ antenna spool ...................................... $2.00
2914 Battery, Power Cell AA Alkaline (4) ............................................. $3.99
1726 Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) .............. $1.00
2922 Battery, Power Cell, 3000mAh (NiMH, 6-C flat, 7.2V) ................. $34.99
1834 Body clips (12) (standard size) ....................................................... $2.00
2926 Battery, Power Cell, 3000mAh (NiMH, 7-C hump, 8.4V)................. $39.99
3934 Body clips, heavy duty (12) ............................................................ $3.00
2942 Battery, Series 3 Power Cell, 3300mAh (NiMH, 6-C flat, 7.2V) ... $39.99
1589 Double-sided adhesive tape (25mm x 25mm) (2) ........................... $1.00
2941 Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C hump,
1633 E-clips/ C-rings ............................................................................... $2.00 8.4V) .............................................................................................. $45.99
2745 Nuts, 3mm nylon locking (12) ......................................................... $2.00 2952 Battery, Series 4 Power Cell, 4200mAh (NiMH, 6-C flat, 7.2V) ... $59.99
3647 Nuts, 4mm flanged nylon locking (steel, serrated) (8) .................... $3.25
2951 Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C hump,
1747 Nuts, 4mm nylon locking (10) ......................................................... $2.00 8.4V) .............................................................................................. $69.99
1985 PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings) ... $2.00 2961 Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C hump,
5525 Rod ends (12)/ hollow balls (12) .................................................... $9.00 8.4V) ............................................................................................. $74.99
5347 Rod ends, Revo (large) with hollow balls (12) ................................ $9.00 2963 Battery, Series 5 Power Cell, 5000mAh (NiMH, 8-C hump,
2742X Rod ends, short (6)/ hollow balls (6) ............................................... $4.00 9.6V) ............................................................................................. $84.99
3347 Screws, 2.5x5mm button-head machine (hex drive) (6) ................. $2.50 2946 Charge lead................................................................................... $6.50
3215 Screws, 2.5x6mm cap-head machine (hex drive) (6)...................... $2.00 2935 Charger, 2-3 cell LiPO Balance.................................................... $29.99
2577 Screws, 3x10mm button-head machine (hex drive) (6) .................. $2.50 2927 Charger, A/C, 350 mA (7 cell, NiMH) .............................................. $14.00
4859 Screws, 3x10mm flat-head machine (hex drive) (4)........................ $1.75 2931 Charger, EZ-Peak AC/DC, 4 amp ................................................. $55.00
2578 Screws, 3x12mm button-head machine (hex drive) (6) .................. $2.50 2937X Charger, EZ-Peak AC/DC, 5amp, NiMH ....................................... $90.00
2552 Screws, 3x12mm countersunk machine (6) (hex drive) .................. $2.50 2933 Charger, EZ-Peak Plus, 6amp, LiPo, NiMH fast charger ............ $129.99
2579 Screws, 3x15mm button-head machine (hex drive) (6) .................. $2.50 2932 Charger, EZ-Peak, 2-amp, 6V-9.6V,5-8 cell NiMH fast charger .. $32.99
2586 Screws, 3x15mm cap-head machine (hex drive) (6)....................... $2.50 2929 Charging Bag, 30 watt hours rated ............................................. $29.99
3646 Screws, 3x15mm flat-head machine (hex drive) (6)........................ $2.50 6541 Connector, power tap (with cable) (long)/ wire tie ..................... $6.00
2583 Screws, 3x18mm button-head machine (hex drive) (6) .................. $2.50 2072 Gear set (for 2070, 2075 servos) .................................................... $4.00
2580 Screws, 3x20mm button-head machine (hex drive) (6) .................. $2.50 6535 Mount, temperature sensor (electric motors)/ wire tie/
2591 Screws, 3x23mm button-head machine (hex drive) (6) .................. $2.50 thermal pad ................................................................................... $3.00
2582 Screws, 3x30mm button-head machine (hex drive) (6) .................. $2.50 6518 Receiver, micro, TQi 2.4GHz with telemetry (5-channel) ................ $50.00
2592 Screws, 3x40mm button-head machine (hex drive) (6) .................. $3.00 6520 Sensor, RPM (long)/ 3x4mm BCS (2)/ 3x4 GS (1) ....................... $12.00
2575 Screws, 3x6mm button-head machine (hex drive) (6) .................... $2.50 6521 Sensor, temperature and voltage (long) ..................................... $12.00
3932 Screws, 3x6mm flat-head machine (hex drive) (6) ......................... $2.50 2074 Servo case/gaskets (for 2056 and 2075 waterproof servos) ........... $6.00
2576 Screws, 3x8mm button-head machine (hex drive) (6) .................... $2.50 2075 Servo, digital high-torque (ball bearing), waterproof ....................... $46.00
3931 Screws, 3x8mm flat-head machine (hex drive) (6) ......................... $2.50 6538 Telemetry trigger magnet holders, spur gear/ magnet,
3937 Screws, 4x12mm button-head machine (hex drive) (6) .................. $2.50 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS (3)............................ $3.00
2542 Screws, 4x12mm countersunk machine (hex drive) (6) .................. $2.50 6540 Telemetry trigger magnet, 5X2mm (1)......................................... $2.00
2546 Screws, 4x15mm countersunk machine (hex drive) (6) .................. $2.50 2928 Temperature sensor, EZ-Peak Plus............................................. $10.99
2743 Set (grub) screws, 3mm hardened (12) .......................................... $3.00 6509X TQi 2.4 GHz High Output radio system, 2-channel Traxxas Link
5529 Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow enabled (2-ch transmitter, 5-ch micro receiver) .............................. $135.00
balls, captured (4) .......................................................................... $3.50 6507X TQi 2.4 GHz High Output radio system, 4-channel with
3642X Shoulder screws, Ultra Shocks (3x12 hex drive) (6) ....................... $3.00 Traxxas Link Wireless Module (4-ch transmitter, 5-ch micro
2754 Stub axle pins (4) ........................................................................... $1.00 receiver) ........................................................................................ $200.00
2746 Washers, 3x6mm metal (12) .......................................................... $1.50 6528 Transmitter, TQi Traxxas Link enabled, 2.4GHz high output,
3685 White plastic washers (5x8x1.0mm) (6).......................................... $2.50 2-channel (transmitter only) ............................................................ $100.00
6529 Transmitter, TQi Traxxas Link enabled, 2.4GHz high output,
Motors & Electronics 3-channel (transmitter only) ........................................................ $105.00
3062 Adapter, Traxxas connector female to Molex male (1) (Note: 6530 Transmitter, TQi Traxxas Link enabled, 2.4GHz high output,
Molex connector not suitable for high current use) .................. $5.50 4-channel (transmitter only) ........................................................ $115.00
3061 Adapter, Traxxas connector male to Molex female (1) (Note: 6511 Traxxas Link Wireless Module .................................................... $45.00
Molex connector not suitable for high current use) .................. $5.00 3355R VXL-3s Electronic Speed Control, waterproof (brushless)
1726 Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) .............. $1.00 (fwd/rev/brake) .............................................................................. $220.00
3342 Bullet connectors, male, 3.5mm (3) / heat shrink ............................ $5.50 6537 Wire retainers, gear cover/ 3x4mm BCS (2)................................ $3.00
3340 Cooling fan, Velineon VXL-3s ESC ............................................. $25.00
2072 Gear set (for 2070, 2075 servos).................................................... $4.00
Ready-To-Race Model
3354R Motor cover, endbell (Velineon 3500) ............................................. $3.00 37076 Rustler VXL: 1/10 Scale Stadium Truck with TQi Traxxas Link
3351R Motor, Velineon 3500, brushless (assembled with 12-gauge wire Enabled 2.4GHz Radio System ...................................................... Call
and gold-plated bullet connectors) ................................................. $120.00 Rear Suspension
3725 Mounting plate, speed control (VXL-3s) (Bandit, Rustler, 3638 Shock tower (rear) .......................................................................... $4.50
Stampede) ..................................................................................... $3.00
3752 Stub axle carriers (2) (requires 5x11x4mm bearings) ..................... $3.00
3352 Rebuild kit, Velineon 3500 (includes 5x11x4mm ball bearings (2),
3652A Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
2.5x5mm BCS (with threadlock) (4), front and rear bushings) ........ $13.00
aluminum (blue-anodized)/ 5x11mm ball bearings (4) ............... $35.00
3347 Screws, 2.5x5mm button-head machine (hex drive) (6) ................. $2.50
3652G Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
3931 Screws, 3x8mm flat-head machine (hex drive) (6) ......................... $2.50 aluminum (green-anodized)/ 5x11mm ball bearings (4)............. $35.00
2074 Servo case/gaskets (for 2056 and 2075 waterproof servos) ........... $6.00 3652X Stub axle carriers, Rustler/Stampede/Bandit (2), 6061-T6
2075 Servo, digital high-torque (ball bearing), waterproof ....................... $46.00 aluminum (red-anodized)/ 5x11mm ball bearings (4)................. $35.00
3080 Traxxas Connector (female) (2) ................................................... $4.75 2753X Stub axles, rear (2) ......................................................................... $5.00
3070 Traxxas Connector (male) (2)......................................................... $3.75 3655X Suspension arms, left & right .......................................................... $10.00
3060 Traxxas Connector (male/female) (1) ......................................... $4.25 3640 Suspension screw pin set, steel (hex drive) (requires part # 2640
3350R Velineon VXL-3s Brushless Power System, waterproof (includes for a complete suspension pin set) (Rustler, Stampede, Bandit) .... $4.50
VXL-3s waterproof ESC , Velineon 3500 motor, and speed
control mounting plate (part #3725)) .............................................. $330.00

REV. 140417 1630

Page 3 Rustler VXL: TQi Traxxas Link Enabled 2.4GHz Radio (Model 37076) Parts List

3741A Turnbuckles, aluminum (blue-anodized), camber links, front, 1666 Silicone shock oil (30 wt) ................................................................ $2.00
39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow 3769 Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2) ..... $4.00
balls)/ wrench ............................................................................... $22.00 3768 Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-
3741X Turnbuckles, aluminum (red-anodized), camber links, front, hole (2)) .......................................................................................... $3.00
39mm (2), rear, 49mm (2) (assembled w/ rod ends & hollow 2458 Springs, front (black) (2) .............................................................. $2.00
balls)/wrench ................................................................................ $22.00 2458A Springs, front (white) (2) ................................................................. $4.00
3643 Turnbuckles, camber link, 49mm (82mm center to 3757 Springs, rear (black) (2) .............................................................. $2.00
center) (assembled with rod ends and hollow balls) (1 left, 1 right) $7.50 3757T Springs, rear (blue) (2) ................................................................. $4.00
Shocks (Aluminum) 3757A Springs, rear (green) (2) ............................................................... $5.00
1965 Piston head set, (2 sets of 3 types)/ shock collars (2)/ spring 3757R Springs, rear (red) (2.9 rate) (2) ................................................... $4.00
retainers (2) .................................................................................. $2.50 3757X Springs, rear (white) (2) .................................................................. $4.00
1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball 4957 Springs, red (for Ultra Shocks only) (2.5 rate) (f/r) (2) ............... $2.50
screws (2) ...................................................................................... $7.00 3760 Ultra Shocks (black) (long) (complete w/ spring pre-load
2742X Rod ends, short (6)/ hollow balls (6) ............................................... $4.00 spacers & springs) (front) (2) ...................................................... $18.00
2760 Shock caps, aluminum (2) ........................................................... $7.00 3762 Ultra Shocks (black) (xx-long) (complete w/ spring pre-load
1664T Shock shafts, hardened steel, titanium nitride spacers & springs) (rear) (2) ........................................................ $18.00
coated (long) (2) ........................................................................... $10.00 3760A Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers &
2765T Shock shafts, hardened steel, titanium nitride coated (X- springs) (2) ..................................................................................... $18.00
long) (2) ......................................................................................... $10.00 3762A Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load
1664 Shock shafts, steel, chrome finish (long) (2) ................................... $3.00 spacers & springs) (rear) (2) ........................................................... $18.00
2765 Shock shafts, steel, chrome finish (X-long) (2) .......................... $3.00 Slipper Clutch Components
4760 Shocks, long (hard-anodized & PTFE-coated T6 aluminum) 3793 Input shaft (slipper shaft) / spring pin .............................................. $3.00
w/o springs (front) (2) .................................................................. $25.00 5552X Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/
4761 Shocks, X-long (hard-anodized & PTFE-coated T6 aluminum) pin/ 4.0mm NL (1)/ 5.0mm NL (1)) .................................................. $10.00
w/o springs (rear) (2) .................................................................... $25.00 2554 Screws, 3x6mm cap-head machine (hex drive) (6) ......................... $2.50
1666 Silicone shock oil (30 wt) ................................................................ $2.00 5556 Slipper pressure plate & hub (aluminum alloy) ............................... $8.00
Shocks (Pro-level Aluminum) Spur Gears & Pinion Gears
2664 Big Bore shock cylinder (long) (1) .............................................. $8.00 2416 Gear, 16-T pinion (48-pitch) / set screw ...................................... $3.50
2666 Big Bore shock cylinder (XX-long) (1) ........................................ $8.00 1918 Gear, 18-T pinion (48-pitch) / set screw ...................................... $3.00
5862 Big Bore shocks (hard-anodized & PTFE-coated T6 2419 Gear, 19-T pinion (48-pitch) / set screw ...................................... $3.00
aluminum) (assembled with TiN shafts and springs) (front &
2423 Gear, 23-T pinion (48-pitch) / set screw ...................................... $3.00
rear) (4).......................................................................................... $70.00
2426 Gear, 26-T pinion (48-pitch)/set screw ........................................ $3.00
2660 Big Bore shocks (long) (hard-anodized & PTFE-coated T6
aluminum) (assembled with TiN shafts) w/o 2431 Gear, 31-T pinion (48-pitch) / set screw ...................................... $3.00
springs (front) (2) ......................................................................... $30.00 4725 Gear, pinion (25-tooth) (48-pitch) / set screw.................................. $3.00
2662 Big Bore shocks (XX-long) (hard-anodized & PTFE-coated T6 4728 Gear, pinion (28-tooth) (48-pitch)/ set screw .............................. $3.00
aluminum) (assembled with TiN shafts) w/o springs (rear) (2) $30.00 4676 Spur gear, 76-tooth (48-pitch) (for models with Torque-
2669 Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting Control slipper clutch) ................................................................. $3.00
bushings & washers (2) (Big Bore Shocks) ............................... $2.50 4683 Spur gear, 83-tooth (48-pitch) (for models with Torque-Control
2362 Rebuild kit, Ultra shocks (for 2 shocks ...................................... $2.50 slipper clutch) ................................................................................. $3.00
1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball 4686 Spur gear, 86-tooth (48-pitch) (for models with Torque-
screws (2) ...................................................................................... $7.00 Control slipper clutch) ................................................................. $3.00
2742X Rod ends, short (6)/ hollow balls (6) ............................................... $4.00 4690 Spur gear, 90-tooth (48-pitch) (for models with Torque-
2667 Shock caps, aluminum (2)/ (Big Bore Shocks) .......................... $7.00 Control slipper clutch) ................................................................. $3.00
1664T Shock shafts, hardened steel, titanium nitride Steering Components
coated (long) (2) ........................................................................... $10.00 2728 Ball bearings (5x8x2.5mm) (2) ..................................................... $8.00
2656T Shock shafts, hardened steel, titanium nitride coated (xx- 2545 Bellcrank bushings (plastic) (5x8x2.5mm) (4) ................................. $3.00
long) (2) ......................................................................................... $10.00
5347 Rod ends, Revo (large) with hollow balls (12)................................. $9.00
1664 Shock shafts, steel, chrome finish (long) (2) ................................... $3.00
3744 Servo saver w/ adapters ................................................................. $4.00
2656 Shock shafts, steel, chrome finish (xx-long) (2) .............................. $3.00
3743 Steering bellcranks (l&r)/ draglink ................................................... $4.00
1765 Silicone diaphragms (4).................................................................. $2.00
3743A Steering bellcranks, drag link (blue-anodized T6 aluminum)/
1666 Silicone shock oil (30 wt) ................................................................ $2.00 5x8mm ball bearings (4) hardware (assembled) ........................ $34.00
2668 Spring retainers, upper & lower (2)/ spring pre-load spacers: 3743X Steering bellcranks, drag link (red-anodized T6 aluminum)/
1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore 5x8mm ball bearings (4) hardware (assembled) ........................ $34.00
Shocks) ......................................................................................... $5.50
6845X Steering bellcranks/ servo saver/ servo saver spring/ servo
5860 Springs, front (white) (progressive rate) (2) (fits #5862 spring retainer/servo horn, steering ........................................... $12.00
aluminum Big Bore shocks) ........................................................ $8.00
2537 Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw ............... $2.50
5859 Springs, rear (white) (progressive rate) (2) (fits #5862
3139A Turnbuckles, aluminum (blue-anodized), toe links,
aluminum Big Bore shocks) ........................................................ $8.00
59mm (2) (assembled w/ rod ends & hollow balls) (requires
Shocks (Ultra Shocks) 5mm aluminum wrench #5477).................................................... $12.00
3642 Attachment screws, shock (3x12mm shoulder screws) (6) ............. $3.00 3139X Turnbuckles, aluminum (red-anodized), toe links,
3765A Body, Ultra Shock(s) (long) (grey) (2) ............................................. $3.00 59mm (2) (assembled with rod ends & hollow balls) (requires
5mm aluminum wrench #5477).................................................... $12.00
3766A Body, Ultra Shock(s) (XXL) (grey) (2) ............................................. $3.00
3745 Turnbuckles, toe link, 59mm (78mm center to
2362 Rebuild kit, Ultra shocks (for 2 shocks ...................................... $2.50
center) (2) (assembled with rod ends and hollow balls) .................. $8.75
1942 Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball
screws (2) ...................................................................................... $7.00 Suspension Linkage
2742X Rod ends, short (6)/ hollow balls (6) ............................................... $4.00 5525 Rod ends (12)/ hollow balls (12) .................................................... $9.00
3767 Shock caps (2)/ shock bottoms (2) ................................................. $3.00 5525R Rod ends, heavy duty (Jato/Slayer) (8) ....................................... $4.00
3767A Shock caps, aluminum (blue-anodized) (4) (fits all Ultra 5347 Rod ends, Revo (large) with hollow balls (12)................................. $9.00
Shocks) ......................................................................................... $14.00 3739 Screw pin set (Rustler/ Bandit/ Stampede) ..................................... $4.50
3767G Shock caps, aluminum (green-anodized) (4) (fits all Ultra 3744 Servo saver w/ adapters ................................................................. $4.00
Shocks) ......................................................................................... $14.00 2640 Suspension pins, 44mm (2) w/ E-clips ............................................ $2.50
3767X Shock caps, aluminum (red-anodized) (4) (fits all Ultra 3640 Suspension screw pin set, steel (hex drive) (requires part # 2640
Shocks) ......................................................................................... $14.00 for a complete suspension pin set) (Rustler, Stampede, Bandit) .... $4.50
1664T Shock shafts, hardened steel, titanium nitride 2537 Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw ............... $2.50
coated (long) (2) ........................................................................... $10.00
3737A Turnbuckle, aluminum (blue-anodized), camber link, front,
2656T Shock shafts, hardened steel, titanium nitride coated (xx- 39mm (1)(assembled w/rod ends)/hollow balls (2)(See part
long) (2) ......................................................................................... $10.00 3741A for complete camber link set) .......................................... $6.00
1664 Shock shafts, steel, chrome finish (long) (2) ............................. $3.00 3738A Turnbuckle, aluminum (blue-anodized), camber link, rear,
2656 Shock shafts, steel, chrome finish (xx-long) (2) .............................. $3.00 49mm (1) (assembled w/ rod ends & hollow balls) (See part
1765 Silicone diaphragms (4).................................................................. $2.00 3741A for complete camber link set) .......................................... $6.00

REV. 140417 1630

Page 4 Rustler VXL: TQi Traxxas Link Enabled 2.4GHz Radio (Model 37076) Parts List

3737 Turnbuckle, aluminum (red-anodized), camber link, front,

39mm (1) (assembled w/rod ends)/hollow balls (2)(See part Transmission Components
3741X for complete camber link set) .......................................... $6.00 4607 Ball bearings (5x11x4mm) (8)........................................................ $24.00
3738 Turnbuckle, aluminum (red-anodized), camber link, rear, 3792 Dust cover/rubber plug (w/ screws) (telemetry ready)..................... $3.50
49mm (1) (assembled with rod ends & hollow balls)(See part 5478 Flat wrench, 8mm (blue-anodized aluminum) ................................. $4.00
3741X for complete camber link set) .......................................... $6.00 3691 Gearbox halves (l&r) (black) w/ idler gear shaft ......................... $8.00
3741A Turnbuckles, aluminum (blue-anodized), camber links, front, 3691A Gearbox halves (l&r) (grey) w/ idler gear shaft .............................. $8.00
39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow 5148 Grease, white lithium ...................................................................... $3.00
balls)/ wrench ............................................................................... $22.00 3696 Idler gear, steel (30-tooth) .............................................................. $3.00
3139A Turnbuckles, aluminum (blue-anodized), toe links, 3793 Input shaft (slipper shaft) / spring pin .............................................. $3.00
59mm (2) (assembled w/ rod ends & hollow balls) (requires 2381X Main diff with steel ring gear/ side cover plate/ screws (Bandit,
5mm aluminum wrench #5477) ................................................... $12.00 Stampede, Rustler) ........................................................................ $6.00
3741X Turnbuckles, aluminum (red-anodized), camber links, front, 1552 Motor screws (3x8mm hex cap) (6)/washers (6)/ wrench .......... $3.00
39mm (2), rear, 49mm (2) (assembled w/ rod ends & hollow 2382 Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear
balls)/wrench ................................................................................ $22.00 alignment shaft (1) all hardened steel ............................................. $6.00
3139X Turnbuckles, aluminum (red-anodized), toe links, 2388X Planetary gear differential with steel ring gear (complete) (fits
59mm (2) (assembled with rod ends & hollow balls) (requires Bandit, Stampede, Rustler) ............................................................ $15.00
5mm aluminum wrench #5477) ................................................... $12.00 5552X Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/
3644 Turnbuckles, camber link, 39mm (69mm center to pin/ 4.0mm NL (1)/ 5.0mm NL (1)) .................................................. $10.00
center) (assembled with rod ends and hollow balls) (1 left, 1 right) $7.00 2554 Screws, 3x6mm cap-head machine (hex drive) (6) ......................... $2.50
3643 Turnbuckles, camber link, 49mm (82mm center to 3931 Screws, 3x8mm flat-head machine (hex drive) (6) .......................... $2.50
center) (assembled with rod ends and hollow balls) (1 left, 1 right) $7.50
3185X Screws, 3x8mm washerhead machine (large head for motor
3745 Turnbuckles, toe link, 59mm (78mm center to mount) (6) ...................................................................................... $1.50
center) (2) (assembled with rod ends and hollow balls) .................. $8.75
1647 Silicone grease ............................................................................... $2.00
Team Traxxas Items 5556 Slipper pressure plate & hub (aluminum alloy) ............................... $8.00
2514 Decal sheet, racing sponsors...................................................... $3.00 3195 Top drive gear, steel (22-tooth) ...................................................... $3.00
9950 Official Team Traxxas racing decal set (flag logo/ 6-color)....... $4.50 Turnbuckles & Threaded Rods
9909 Traxxas racing banner, red & black (3x7 feet) ........................... $15.00
5525 Rod ends (12)/ hollow balls (12) .................................................... $9.00
Tires & Wheels 5525R Rod ends, heavy duty (Jato/Slayer) (8) ....................................... $4.00
5116 Ball bearings, blue rubber sealed (5x11x4mm) (2) ......................... $3.50 5347 Rod ends, Revo (large) with hollow balls (12)................................. $9.00
5114 Ball bearings, blue rubber sealed (5x8x2.5mm) (2) ........................ $4.00 2537 Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw ............... $2.50
5854 Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, 3737A Turnbuckle, aluminum (blue-anodized), camber link, front,
#6856X, #6469).............................................................................. $8.00 39mm (1)(assembled w/rod ends)/hollow balls (2)(See part
3647 Nuts, 4mm flanged nylon locking (steel, serrated) (8) .................... $3.25 3741A for complete camber link set) .......................................... $6.00
1985 PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings) ... $2.00 3738A Turnbuckle, aluminum (blue-anodized), camber link, rear,
1647 Silicone grease............................................................................... $2.00 49mm (1) (assembled w/ rod ends & hollow balls) (See part
3741A for complete camber link set) .......................................... $6.00
2754 Stub axle pins (4) ........................................................................... $1.00
3737 Turnbuckle, aluminum (red-anodized), camber link, front,
3770A Tires & wheels, assembled, glued (2.8") (All-Star black chrome
39mm (1) (assembled w/rod ends)/hollow balls (2)(See part
wheels, Alias tires, foam inserts) (rear) (2) ..................................... $31.00
3741X for complete camber link set)........................................... $6.00
3770 Tires & wheels, assembled, glued (2.8") (All-Star chrome
3738 Turnbuckle, aluminum (red-anodized), camber link, rear,
wheels, Alias tires, foam inserts) (electric rear) (2) ................... $30.00
49mm (1) (assembled with rod ends & hollow balls)(See part
3771A Tires & wheels, assembled, glued (2.8")(All-Star black chrome 3741X for complete camber link set)........................................... $6.00
wheels, Ribbed tires, foam inserts) (electric front) (2)..................... $31.00
3741A Turnbuckles, aluminum (blue-anodized), camber links, front,
3771 Tires & wheels, assembled, glued (2.8")(All-Star chrome 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow
wheels, Ribbed tires, foam inserts) (electric front) (2) .............. $30.00 balls)/ wrench ............................................................................... $22.00
3773A Tires & wheels, assembled, glued (All Star black chrome wheels, 3139A Turnbuckles, aluminum (blue-anodized), toe links,
Anaconda tires, foam inserts) (electric rear) (1 left, 1 right) ............ $33.00 59mm (2) (assembled w/ rod ends & hollow balls) (requires
3773 Tires & wheels, assembled, glued (All Star chrome wheels, 5mm aluminum wrench #5477).................................................... $12.00
Anaconda tires, foam inserts) (electric rear) (1 left, 1 right) ..... $32.00 3741X Turnbuckles, aluminum (red-anodized), camber links, front,
3776A Tires & wheels, assembled, glued (All-Star black chrome 39mm (2), rear, 49mm (2) (assembled w/ rod ends & hollow
wheels, Anaconda tires, foam inserts) (nitro rear/ electric balls)/wrench ................................................................................ $22.00
front) (1 left, 1 right) ..................................................................... $33.00
3139X Turnbuckles, aluminum (red-anodized), toe links,
5576R Tires & wheels, assembled, glued (All-Star chrome wheels, 59mm (2) (assembled with rod ends & hollow balls) (requires
Anaconda tires, foam inserts) (nitro rear/ electric front) (1 5mm aluminum wrench #5477).................................................... $12.00
left, 1 right) ................................................................................... $32.00
3644 Turnbuckles, camber link, 39mm (69mm center to
5569 Tires, Alias 2.8" (rear) (2)/ foam inserts (2)..................................... $20.00 center) (assembled with rod ends and hollow balls) (1 left, 1 right) $7.00
5578 Tires, Anaconda 2.8" (2)/ foam inserts (2) .................................. $20.00 3643 Turnbuckles, camber link, 49mm (82mm center to
3670 Tires, nitro and electric Stampede terra (2) ................................ $16.00 center) (assembled with rod ends and hollow balls) (1 left, 1 right) $7.50
4791 Tires, Pro-Trax mini-spiked 2.2" (rear) (2) .................................. $14.00 3745 Turnbuckles, toe link, 59mm (78mm center to
4780 Tires, Pro-Trax ribbed 2.2" (front) (2) .......................................... $14.00 center) (2) (assembled with rod ends and hollow balls) .................. $8.75
4790 Tires, Pro-Trax spiked 2.2" (rear) (2) ........................................... $14.00
4790R Tires, Pro-Trax spiked 2.2" (soft-compound)(rear) (2)/ foam
inserts (2) ...................................................................................... $17.50
5563 Tires, Ribbed 2.8" (front) (2)/ foam inserts (2) ................................ $20.00
3654 Wheel hubs, hex (front) (tall offset) (2)/ axle pins (2.5x12mm) (2) .. $3.00
1654 Wheel hubs, hex (rear) (2)/ stub axle pins (2)................................. $2.00 If you have questions or need technical assistance, call Traxxas at:
5853X Wheel hubs, splined, 17mm, short (2), long (2)/wheel nuts,
splined, 17mm (4) (blue-anodized)/ hub retainer 1-888-TRAXXAS
M4x0.7 (4)/axle pin (4)/wrench, 5mm .......................................... $40.00 (1-888-872-9927) (U.S. residents only)
5353 Wheel nuts, splined, 17mm (blue-anodized) (4) ......................... $10.00
For orders, calls outside the U.S., and other information, call 972-549-3000,
5480X Wheel wrench, splined, 17mm .................................................... $3.00 or fax to 972-549-3011 e-mail Traxxas at [email protected]
3772A Wheels, All-Star 2.8" (black chrome) (electric rear) ........................ $9.00 TRAXXAS.com
5576A Wheels, All-Star 2.8" (black chrome) (nitro rear/ electric front) (2) .. $9.00
3772 Wheels, All-Star 2.8" (chrome) (electric rear) ............................. $8.00
5576 Wheels, All-Star 2.8" (chrome) (nitro rear/ electric front) (2)..... $8.00
3673 Wheels, chrome (2.2'') (front) (2) ................................................. $6.00
3672 Wheels, chrome (2.2'') (rear) (2) .................................................. $6.00
3675 Wheels, dyeable nylon 2.2 (front) (2) .......................................... $4.00
3674 Wheels, dyeable nylon 2.2 (rear) (2)............................................ $4.00
3774 Wheels, Twin-Spoke 2.8" (chrome) (electric rear) (2) ................ $8.00
5572 Wheels, Twin-Spoke 2.8" (chrome) (nitro rear/ electric
front) (2) ........................................................................................ $8.00

REV. 140417 1630