Kali Linux can be used for many things, but it probably is best known for its ability to

penetration test, or “hack,” WPA and WPA2 networks. There are hundreds of
Windows applications that claim they can hack WPA; don’t get them! They’re just
scams, used by professional hackers, to lure newbie or want-to-be hackers into
getting hacked themselves. There is only one way that hackers get into your
network, and that is with a Linux-based OS, a wireless card capable of monitor
mode, and aircrack-ng or similar. Also note that, even with these tools, Wi-Fi
cracking is not

for beginners. Playing with it requires basic knowledge of how WPA authentication
works, and moderate familiarity with Kali Linux and its tools, so any hacker who
gains access to your network probably is no beginner!

These are things that you’ll need:

 A successful install of Kali Linux (which you probably already have done). If
not, follow my tutorial here: http://lewiscomputerhowto.blogspot.com/complete-guide-
on-how-to-install-kali.html
 A wireless adapter capable of injection/monitor mode, here is a list of the
best:http://blackmoreops.com/recommended-usb-wireless-cards-kali-linux
 A wordlist to try and “crack” the handshake password once it has been
captured
 Time and patients

If you have these then roll up your sleeves and let’s see how secure your network is!

Important notice: Hacking into anyone’s Wi-Fi without permission is

considered an illegal act or crime in most countries. We are performing this tutorial
for the sake of penetration testing, hacking to become more secure, and are using
our own test network and router.

By reading and/or using the information below, you are agreeing to

our Disclaimer, which can be found
here:http://lewiscomputerhowto.blogspot.com/disclaimor.html
Step One:

Start Kali Linux and login, preferably as root.

Step Two:

Plugin your injection-capable wireless adapter, (Unless your computer card supports
it). If you’re using Kali in VMware, then you might have to connect the card via

the icon in the device menu.

Step Three:

Disconnect from all wireless networks, open a Terminal, and type airmon-ng

This will list all of the wireless cards that support monitor (not injection) mode. If no
cards are listed, try disconnecting and reconnecting the card and check that it
supports monitor mode. You can check if the card supports monitor mode by
typing ifconfig in another terminal, if the card is listed in ifconfig, but doesn’t show
up in airmon-ng, then the card doesn’t support it.
You can see here that my card supports monitor mode and that it’s listed as wlan0.
Step Four:

Type airmon-ng start followed by the interface of your wireless card. mine is wlan0,
so my command would be: airmon-ng start wlan0

The “(monitor mode enabled)” message means that the card has successfully been
put into monitor mode. Note the name of the new monitor interface, mine is mon0.

Step Five:

Type airodump-ng followed by the name of the new monitor interface, which is
probablymon0.
Step Six:

Airodump will now list all of the wireless networks in your area, and lots of useful
information about them. Locate your network or the network that you have
permission to penetration test. Once you’ve spotted your network on the ever-
populating list, hit Ctrl + Con your keyboard to stop the process. Note the channel of
your target network.

Step Seven:

Copy the BSSID of the target network

Now type this command:

airodump-ng –c [channel] –bssid [bssid] –w /root/Desktop/ [monitor interface]
Replace [channel] with the channel of your target network. Paste the network BSSID
where [bssid] is, and replace [monitor interface] with the name of your monitor-
enabled interface, (mon0).

A complete command should look like this:

airodump-ng -c 10 --bssid 00:14:BF:E0:E8:D5 -w /root/Desktop/ mon0

Now press enter.

Step Eight:

Airodump with now monitor only the target network, allowing us to capture more
specific information about it. What we’re really doing now is waiting for a device to
connect or reconnect to the network, forcing the router to send out the four-way
handshake that we need to capture in order to crack the password.
Also, four files should show up on your desktop, this is where the handshake will be
saved when captured, so don’t delete them!

But we’re not really going to wait for a device to connect, no, that’s not what
impatient hackers do. We’re actually going to use another cool-tool that belongs to
the aircrack suite called aireplay-ng, to speed up the process. Instead of waiting for a
device to connect, hackers use this tool to force a device to reconnect by sending
deauthentication (deauth) packets to the device, making it think that it has to
reconnect with the router.

Of course, in order for this tool to work, there has to be someone else connected to
the network first, so watch the airodump-ng and wait for a client to show up. It might
take a long time, or it might only take a second before the first one shows. If none
show up after a lengthy wait, then the network might be empty right now, or you’re to
far away from the network.

You can see in this picture, that a client has appeared on our network, allowing us to
start the next step.
Step Nine:

leave airodump-ng running and open a second terminal. In this terminal, type this
command:
aireplay-ng –0 2 –a [router bssid] –c [client bssid] mon0
The –0 is a short cut for the deauth mode and the 2 is the number of deauth packets
to send.
-a indicates the access point (router)’s bssid, replace [router bssid] with the BSSID of
the target network, which in my case, is 00:14:BF:E0:E8:D5.
-c indicates the clients BSSID, noted in the previous picture. Replace the [client
bssid] with the BSSID of the connected client, this will be listed under “STATION.”
And of course, mon0 merely means the monitor interface, change it if yours is
different.

My complete command looks like this:

aireplay-ng –0 2 –a 00:14:BF:E0:E8:D5 –c 4C:EB:42:59:DE:31 mon0

Step Ten:

Upon hitting Enter, you’ll see aireplay-ng send the packets, and within moments, you
should see this message appear on the airodump-ng screen!

This means that the handshake has been captured, the password is in the hacker’s
hands, in some form or another. You can close the aireplay-ng terminal and hit Ctrl +
C on the airodump-ng terminal to stop monitoring the network, but don’t close it
yet just incase you need some of the information later.

Step 11:

This concludes the external part of this tutorial. From now on, the process is entirely
between your computer, and those four files on your Desktop. Actually, the .cap one,
that is important. Open a new Terminal, and type in this command:
aircrack-ng -a2 -b [router bssid] -w [path to wordlist] /root/Desktop/*.cap

-a is the method aircrack will use to crack the handshake, 2=WPA method.
-b stands for bssid, replace [router bssid] with the BSSID of the target router, mine is
00:14:BF:E0:E8:D5.
-w stands for wordlist, replace [path to wordlist] with the path to a wordlist that you
have downloaded. I have a wordlist called “wpa.txt” in the root folder.
/root/Desktop/*.cap is the path to the .cap file containing the password, the * means
wild card in Linux, and since I’m assuming that there are no other .cap files on your
Desktop, this should work fine the way it is.

My complete command looks like this:

aircrack-ng –a2 –b 00:14:BF:E0:E8:D5 –w /root/wpa.txt /root/Desktop/*.cap

Now press Enter.

Step 12:

Aircrack-ng will now launch into the process of cracking the password. However, it
will only crack it if the password happens to be in the wordlist that you’ve selected.
Sometimes, it’s not. If this is the case, then you can congratulate the owner on being
“Impenetrable,” of course, only after you’ve tried every wordlist that a hacker might
use or make!

Cracking the password might take a long time depending on the size of the wordlist.
Mine went very quickly.
If the phrase is in the wordlist, then aircrack-ng will show it too you like this:

The passphrase to our test-network was “notsecure,” and you can see here that
aircrack found it.

If you find the password without a decent struggle, then change your password, if it’s
your network. If you’re penetration testing for someone, then tell them to change
their password as soon as possible.