Republic of the Philippines

Department of Education
REGION III – CENTRAL LUZON

THIRD QUARTER
Technology and Livelihood Education
Computer System Servicing 10

Name: ___________________________________________ Date: ___________________

Grade/ Section: _________________________________ Score: __________________
Directions: Choose the letter of the correct answer that best describe the given statements. Write your
answer on your answer sheet.

1. Which of the following is the first step in Computer Assembly Procedures?

A. Open the case C. Gather tools and supplies
B. Procuring parts D. Prepare the case for assembly
2. Which procedure of computer dis-assembly constitutes the removal of the side panels?
A. Open the case C. Gather tools and supplies
B. Procuring parts D. Prepare the case for assembly
3. Which computer assembly procedure involves the collecting of screwdriver, needle-nosed pliers, small
flashlight, and grounding strap?
A. Open the case C. Gather tools and supplies
B. Procuring parts D. Prepare the case for assembly
4. Which procedure performs the removal of any parts or packaging materials that may have been
shipped inside the case” during computer assembly?
A. Open the case C. Gather tools and supplies
B. Procuring parts D. Prepare the case for assembly
5. In computer networking, which port is used to connect an RJ45 with network cable?
A. Audio port C. USB port
B. LAN port D. VGA port
6. Which of the following port is appropriate to connect the monitor data cable to computer system?
A. Audio port C. USB port
B. LAN port D. VGA port
7. Lyka wants to connect a flash drive on Aldrey’s computer, she ask for your assistance to locate the exact
port to connect her flash drive, which port do you suggest?
A. Audio port C. USB port
B. LAN port D. VGA port
8. Which of the following is the right port to connect your computer’s microphone and speakers to?
A. Audio port C. USB port
B. LAN port D. VGA port
9. Which is the correct BIOS option that you need to configure the precedence order for loading of operating
system?
A. Boot Sequence C. Power Management
B. Date and Time D. Security
10. Which of the following BIOS options should be configured to choose whether to use power administration
and set standby and suspend times?
A. Boot Sequence C. Power Management
B. Date and Time D. Security
11. What is the correct BIOS option that must be configure to set the system hour and minute, year, month,
and day?
A. Boot Sequence C. Power Management
B. Date and Time D. Security
12. Which key is used to navigate different tabs of BIOS settings before the exit?
A. ESC B.  C. F10 D. 
13. It manages the computer’s memory, processes, and all of its software and hardware.
A. Application Software C. Operating Systems
B. Device Drivers D. Utility Software
14. It is a family of open-source operating systems, which means that they can be modified and distributed
by anyone around the world.
A. Chrome OS B. Linux Ubuntu C. Microsoft Windows D. Mac OS
15. To update your driver, open the device manager, select the device and right click the ______.
A. Install driver B. Uninstall driver C. Scan driver D. Update driver
16. What is the recommended Processor requirement to run Window server 2008 to a PC?
A. 1 gigabyte B. 1 gigahertz C. 2 gigabyte D. 2 gigahertz
17. It needs ____ RAM (32-bit) or 2 GB RAM (64-bit) to run Window 7 to a PC.
A. 1 gigabyte B. 1 gigahertz C. 2 gigabyte D. 2 gigahertz
18. One of the software used to install updated drivers.
A. Avast B. Driver Pack solution C. Rufus D. System Care
19. Select the Windows 7 edition that does not include both 32-bit and 64-bit versions.
A. Home Premium B. Professional C. Starter D. Ultimate
20. On which of the following file systems, Windows 7 can be installed?
A. FAT16 B. FAT32 C. NTFS D. NTFS16
21. Name the system tool that is used to migrate file.
A. Control Panel C. Task Manager
B. Diagnostic tool D. Windows easy Transfer
22. Why would Ruby’s computer give her an “OS not found” error message when she boots up the computer?
A. The Hard Drive has failed C. The user has a USB key attached
B. Not enough memory is available D. There are conflicting operating systems
23. A computer firmware interface that acts as a "middleman" to connect a firmware of a device to the
operating system.
A. Post C. BIOS
B. CMOS D. UEFI
24. It is a non-volatile firmware which ensures that even after the power off, the settings won't vanish or
change.
A. Post C. BIOS
B. CMOS D. UEFI
25. Commands used to communicate with the operating system and other command line-based applications.
A. POS C. BOS
B. DOS D. SOS
26. What is the 5S environmental policy pertaining to the removal of all clutter or mess that is within the
working area?
A. Seiri C. Seiso
B. Seiton D. Seiketsu
27. It is about maintaining the improvements and continuous improvement.
A. Seiri C. Seiso
B. Seiton D. Seiketsu
28. A computer network which connects two or more LAN networks in a city or town.
A. Personal Area Network C. Local Area Network
B. Wide Area Network D. Metropolitan Area Network
29. A device that allows other Wi-Fi devices to connect to a wired network.
A. Modem C. Router
B. WAP D. Switch
30. A computer network which distances over a small geographical area such as home, building, office,
school etc.
A. Metropolitan Area Network C. Wide Area Network
B. Local Area Network D. Personal Area Network
31. A device that filters and forwards packets between LAN segments.
A. Router C. Patch panel
B. Switch D. WAP
32. A peripheral device which makes a persistent representation of graphics or text, usually on paper.
A. PC C. Printer
B. ISP D. Router
33. A tool use to connect network wires to a patch panel and modular jack.
A. Crimping tool C. Punch down tool
B. LAN tester D. Wire stripper
34. A unique locking system that prevents accidental unplugging resulting from shock and vibration.
A. Modular jack C. Network cable
B. RJ45 D. Twisted pair cable
35. This electronic device used to verify the connections in a signal cable assembly.
A. Crimping tool C. LAN tester
B. Punch down tool D. Wire stripper
36. A connector attached to the end of a twisted-pair cable.
A. Modular jack C. Network cable
B. RJ45 D. Twisted pair cable
37. This is a special tool used to cut, hold, and attach and RJ45 jack to the end of the cable.
A. Crimping tool C. Punch down tool
B. LAN tester D. Wire stripper
 38. On which of these devices can we install an operating system?
A. Game console B. Laptop C. Smartphone D. All of the above
39. The _______ has permission to customize and configure all aspects of the system for all users.
A. Provider C. System Actioner
B. Student D. System Administrator
40. Suppose that you will install Windows XP on a system with more than one partition. What important
process should be done?
A. Change the file system. B. Examine the partition. C. All the above
41. It enables a computer to handle network roles such as print server, domain controller, web server,
and file server.
A. Drivers B. Window server C. Windows 7 D. Window Vista
42. What is the proper sequence of T568A wiring standard?
A. White green, green, blue, white blue, brown, white brown, orange, white orange
B. White green, green, white orange, blue, white blue, orange, white brown, brown
C. White orange, orange, white green, blue, white blue, green, white brown, brown
D. White orange, green, white blue, blue, white brown, brown, white green, orange
43. It is a wiring connection that uses one wiring standard on both ends of UTP cable.
A. Crossover cable connection
B. Modular Jack cable connection
C. Straight-through cable connection
D. Combination cable connection
44. What slot should Michael choose in computer RAM installation?
A. CPU Socket C. M.2 Slot
B. Expansion Card Slots D. Memory Slot
45. It is the proper slot for the computer’s network card installation
A. CPU Socket C. M.2 Slot
B. Expansion Card Slots D. Memory Slot
46. It is the correct slot required to install the computer’s processor
A. CPU Socket C. M.2 Slot
B. Expansion Card Slots D. Memory Slot
47. When you see this, it shows that there is no need to update your computer.
A. Install update C. Software up to date
B. Restart and update D. Update and shutdown
48. Which type of network topology uses switch or hub?
A. Star topology C. Mesh topology
B. Bus topology D. Hybrid topology
49. This key is used to save the configuration of BIOS settings before the exit.
A. F1 B. F2 C. - / + D. F10
50. Crizzy wants to install the Windows 7 edition that does not include both 32-bit and 64-bit versions, what
should you recommend?
A. Home Premium B. Professional C. Starter D. Ultimate