Scribd
Upload
640 views2 pages

Electronic Controller Logik 25-S

Uploaded by

Umair Gujjar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
640 views2 pages

Electronic Controller Logik 25-S

Uploaded by

Umair Gujjar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

LOGIK 25-S Electronic Controller Logik 25-S

Logik 25-S is an industrial electronic control device suitable for the operation of medium - big size
screw compressors. Easy to install and set Logik 25-S visualizes (selection of 9 languages) on the back
light alphanumerical LCD the status of the compressor in real time, detects and shows failures, shutting
the compressor off automatically. Thanks to the time-keeper Logik 25-S allows to set up three working
cycles per day in one week. Logik 25-S is equipped with serial port RS232 for the connection to a PC for
Tele-monitoring, to a GSM unit allowing to send messages on status or failures of the compressor or to
a second compressor equipped with Logik16-S, Logik 18, Logik25-S, Logik 31-S, Logik 33-S for
Master/Slave operation.

Visualizations: pressures, temperatures,


compressor status and alarms.

Emergency led

Visualizations and messages


in 9 languages

Setting parameters on
3 password levels

Easy to set

Via Garibaldi, 83A - 20834 Nova Milanese (MB) Italy


Tel. +39/0362/3700.1 - Fax +39/0362/370030
www.logikacontrol.it
LOGIK 25-S TECHNICAL FEATURES

• Conformity to EC and UL 508 regulation. • nr. 1 time-keeper with buffer battery, around
• Inputs and outputs via terminal-block board to wires. 10 years electrical life.
• Black auto-extinguishing box in ABS: • nr. 1 serial port RS232 to connect another compressor
a) according EC: (Master/Slave operation), PC or GSM unit
IP64 for the front panel and IP20 for the other parts; (Super Vision and Tele Assistance).
b) according UL: • Non volatile memory to store setting data, working hours,
Type 1 and Type 12 for front panel mounting, compressor status, alarm list.
installation in pollution degree 2 for the other parts • Check min. and max. power supply to the controller.
• Working temperature: 0°C (32°F) ÷ 50°C (122°F) • The controller switches OFF due to micro interruption longer
90% RH (non condensing). than ~ 300 m.s..
• Storage temperature: -20°C (-4°F) ÷ 70 °C (158°F).
• Power supply: 12Vac ± 10% 50 ÷ 60 Hz. ACCESSORIES:
• Visualization through: • nr. 1 temperature probe KTY with black cable TPE,
- back light alphanumerical LCD 20 digits x 2 rows length 2.5 m, working range –10 ÷ 130°C, resolution 1°C,
- nr. 1 led for alarm status. precision ± 1°C, to detect air-end temperature.
• Messages selectable in 9 languages: Italian - English - • nr. 1 Logika control phases unit:
French - German - Spanish - Portuguese - Turkish - - for power supply 380 ÷ 400V three phase
Russian - Polish. - for power supply 230V three phase
• nr. 5 key buttons: increase, decrease, enter, start, stop. - for power supply 440 ÷ 460V three phase
• nr. 1 input for temperature probe to detect air-end • nr. 1 pressure transducer 4-20 mA for working pressure
temperature. control: 2 wires, AISI 316L stainless steel membrane,
• nr. 1 input for pressure transducer. working range 0 ÷ 15 bar, resolution 0,1bar, precision
• nr. 3 digital inputs for connection to Logika Control ± 0,1bar.
phases unit. • Windows™ application for remote control (Super Vision
• nr. 1 input for PTC or Klicson for motor protection. and Tele Assistance).
• nr. 7 opto isolated digital inputs 12-24 Vac to detect:
IN 1 = emergency stop button
IN 2 = thermal motor
IN 3 = thermal fan
IN 4 = remote start/stop
IN 5 = air filter pressure switch
IN 6 = separator filter differential pressure switch
IN 7 = settable via software into: door of electrical
cabinet open – control phase relay – generic alarm
• nr. 7 outputs via relay with contact 1.5A max.
(general use):
RL1 = line contactor
RL2 = delta contactor
RL3 = star contactor
RL4 = load solenoid valve 106 mm
RL5 = fan contactor
RL6 = settable via software into: condensate drain
solenoid valve or compressor status
RL7 = settable via software into: alarm 25 - S
or compressor status

161 mm
60 mm

Via Garibaldi, 83A - 20834 Nova Milanese (MB) Italy


Tel. +39/0362/3700.1 - Fax +39/0362/370030
www.logikacontrol.it EDITION JULY 2012

You might also like