Scribd
Upload
64 views2 pages

Beton-Caracteristici Eurocod 2

The document provides a table summarizing the design properties of concrete according to EN1992-1-1. It includes the characteristic compressive strength, mean compressive strength, tensile strength, elastic modulus, and design strengths for different concrete grades from C12/15 to C90/105. It also lists requirements for minimum longitudinal reinforcement, minimum shear reinforcement, and minimum reinforcement ratios.

Uploaded by

Gheorghiu Dragos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
64 views2 pages

Beton-Caracteristici Eurocod 2

The document provides a table summarizing the design properties of concrete according to EN1992-1-1. It includes the characteristic compressive strength, mean compressive strength, tensile strength, elastic modulus, and design strengths for different concrete grades from C12/15 to C90/105. It also lists requirements for minimum longitudinal reinforcement, minimum shear reinforcement, and minimum reinforcement ratios.

Uploaded by

Gheorghiu Dragos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Concrete Design Properties according to EN1992-1-1 (γc = 1.

50, fyk =
(for αcc=1.
Symbol fck (MPa) fck,cube (MPa) fcm (MPa) fctm (MPa) Ecm (MPa) fcd (MPa)
00)

Characteri
Characteri Mean
stic Design
stic cube cylinder Mean
Descriptio cylinder Elastic compressi (for αcc=1.
compressi compressi tensile
n compressi modulus ve 00)
ve ve strength
ve strength
strength strength
strength

C12/15 12 15 20 1.57 27085 8


C16/20 16 20 24 1.9 28608 10.67
C20/25 20 25 28 2.21 29962 13.33
C25/30 25 30 33 2.56 31476 16.67
C30/37 30 37 38 2.9 32837 20
C35/45 35 45 43 3.21 34077 23.33
C40/50 40 50 48 3.51 35220 26.67
C45/55 45 55 53 3.8 36283 30
C50/60 50 60 58 4.07 37278 33.33
C55/67 55 67 63 4.21 38214 36.67
C60/75 60 75 68 4.35 39100 40
C70/85 70 85 78 4.61 40743 46.67
C80/95 80 95 88 4.84 42244 53.33
C90/105 90 105 98 5.04 43631 60
to EN1992-1-1 (γc = 1.50, fyk = 500 MPa)
(for αcc=0. (for αct=1.
fcd (MPa) fctd (MPa) ρmin (%) ρw,min (%)
85) 00)

Minimum
Minimum
Design longitudin
Design shear
compressi (for αcc=0. (for αct=1. al tension
tensile reinforce
ve 85) 00) reinforce
strength ment
strength ment
ratio
ratio

6.8 0.73 0.13 0.055


9.07 0.89 0.13 0.064
11.33 1.03 0.13 0.072
14.17 1.2 0.133 0.08
17 1.35 0.151 0.088
19.83 1.5 0.167 0.095
22.67 1.64 0.182 0.101
25.5 1.77 0.197 0.107
28.33 1.9 0.212 0.113
31.17 1.97 0.219 0.119
34 2.03 0.226 0.124
39.67 2.15 0.24 0.134
45.33 2.26 0.252 0.143
51 2.35 0.262 0.152

You might also like