Scribd
Upload
16 views3 pages

PTEE7301 April-2018

Uploaded by

imman46920
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
16 views3 pages

PTEE7301 April-2018

Uploaded by

imman46920
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 3
2lo}r jafijs]afofr fe BE. B Tech. DEGREE END SEMESTER EXAMINATIONS, APR/MAY 2018 ELECTRICAL and ELECTRONICS ENGINEERING BRANCH PTEE7301 — Control Systems Il — SEMESTER (Regulations- 2017) Time : 3 Hours Max. Mark : 100 Part—A (10°2= 20 Marks) Define transfer function. Compare open loop and closed loop systems. ‘What are the different type of test signals? Draw the root locus of G(s)H(s) = K (s+2)((s+1)(s+5)) Gain margin of the system is infinite and phase margin is - 45 degrees. Explain the hens stability nature of this system. 6. Draw the approximate polar plot of G(s) = 1/s(1+sT). 7. Mention the advantages of state variable analysis in comparison with transfer function. 8. What are the properties of state transition matrix? 9. Whatare the improvements offered by lead compensator for a system? 10. What are the effects of proportional controller? itp ign a unity feedback system with the plant transfer function, G(s) = K/((s+2)(s+6)) ‘with the following specifications: Maximum overshoot < 18 % and static error constant > 4. (Compulsory) Part B (516 =80 Marks) fe) Obtain C/R using block diagram algebra. (See Figure.) _ G Figure.1 Block diagram 1/3 . Scanned by CamScanner (®)peain the transfer function using Mason's Gain formula. (See Figure .2) Figure.2 Signal Flow graph 13. (a) Draw the root loc for the following equation : s?+2s+2+K(s+2) = 0 OR (@potenine the stability of the characteristic equation s*+s°+2s?+2s+5= 0 by framing Routh array. 14. (a) Draw the Nyquist diagram for a unity feedback system whose open loop transfer function is given as: G(s) = K/((s+1)(s+2)(s+3)) and find the range of values of K for which the system remains stable. OR struct the Bode plots for a system having the open-loop transfer function as: G(S)H(s) = 5/6(1+0.5s)(1+0.18)) and determine the clos 15.(@) Obtain the state model forthe folowing, (Figure 3) et loop stability. Figure. 3 Scanned by CamScanner OR (b) The state equation of a linear — time invariant system is given as: dX/dt = 1 5 0 - 2 X+!q |r andy=[1 1)X Determine (ithe characteristic equation and Eigen values. (4+4 Marks) Gi) The state transition matrix (8 Marks) Scanned by CamScanner

You might also like