Scribd
Upload
423 views2 pages

12.hxtd8xy16065t0a - 2600m 8t8r Fiberhome

This document provides specifications for a base station antenna with the model number HXTD8XY16065T0A. The key details are: 1. It operates within the 2500-2690MHz frequency range and uses a TDD 8T8R configuration. 2. The electrical specifications include a polarization of ±45 degrees, an electrical downtilt range of 2-12 degrees, and gain between 16.5-18.0 dBi depending on the beam pattern. 3. Mechanical specifications list the antenna dimensions as 1500x370x124mm, a weight of 20-25.9kg, and an operating temperature range of -40 to +70 degrees Celsius.

Uploaded by

jaager1985
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
423 views2 pages

12.hxtd8xy16065t0a - 2600m 8t8r Fiberhome

This document provides specifications for a base station antenna with the model number HXTD8XY16065T0A. The key details are: 1. It operates within the 2500-2690MHz frequency range and uses a TDD 8T8R configuration. 2. The electrical specifications include a polarization of ±45 degrees, an electrical downtilt range of 2-12 degrees, and gain between 16.5-18.0 dBi depending on the beam pattern. 3. Mechanical specifications list the antenna dimensions as 1500x370x124mm, a weight of 20-25.9kg, and an operating temperature range of -40 to +70 degrees Celsius.

Uploaded by

jaager1985
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Base Station Antenna

HXTD8XY16065T0A
2500-2690MHz , TDD 8T8R Smart Antenna

Electrical Specifications
Frequency Range(MHz) 2500-2690
General Polarization (o) ±45
Parameters Electrical downtilt(o) 2-12
Electrical downtilt tolerance(o) ±1.5
Coupling Factor between calibration port and each antenna port(dB) -26±2
Max. amplitude tolerance from calibration port to input ports (dB) 1.0
Calibration
Max. phase tolerance between calibration port and each antenna 9
and electrical
port(o)VSWR
Ports ≤1.5
parameter
Co-polarization Isolation between ports (dB) ≥25
Cross-polarization Isolation between ports(dB) ≥25
Horizontal 3dB beam width(°) 65±15
Gain (dBi) 16.5±0.8
±60°Gain roll-off at sector edge(dB) 12±5
Vertical 3dB beam width(°) ≥5.6
Single column
pattern Cross polar ratio(0°)(dB) >15
Cross polar ratio(60°)(dB) >8
Front to back ratio(dB) >24
Vertical Sidelobe suppression from first side lobe
≤-15
above main beam(dB)
Radiation Horizontal 3dB beam width(°) 65±10
parameters Gain (dBi) tilt 0 ° 18.0±0.8
±60°Gain roll-off at sector edge(dB) 12±5
Vertical 3dB beam width(°) ≥5.6
65°Broadcasting
Cross polar ratio(0°)(dB) >15
beam
Cross polar ratio(60°)(dB) >8
Front to back ratio(dB) >25
Vertical Sidelobe suppression fro first side lobe
≤-15
above main beam(dB)
0°direct beam gain(dBi) @ tilt 0° 21.5±0.8
Service beam
0°direct beam horizontal 3dB beam width (°) <23
0°direct beam horizontal sidelobe ≤-12
0° direct beam cross polar ratio(axial)(dB) ≥18
0° direct beam front to back ratio(dB) ≥25
Mechanical specifications
Connector 8+1(Cal) 4.3-10 female (Bottom)
Remote Electrical Tilt (RET) Integrated, AISG 2.0
Antenna dimensions (H x W x D) (mm) 1500×370×124
Weight(kg) 20 / 25.9 (clamps incl.)
Max. wind velocity (m/s) 60
Wind load (N, at 150km/h)
Frontal/ Lateral/ Rearside 659/215/781
Operational Temperature (℃) -40 to +70
Operational Humidity < 95%
Packing Dimensions(H x W x D) (mm) 1810x 455 x 220
Radome Material Fiberglass
Radome Color Light Grey
Lightning Protection DC Ground
Interface structure

You might also like