Epona Sa 220
Epona Sa 220
EPONA SA 220
SDS # : 33477
Section 1. Identification
GHS product identifier : EPONA SA 220
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
Industrial gear oil
TOTAL
Supplier's details : TotalEnergies Marketing USA, Inc.
1201 Louisiana St. Suite 1800
Houston, TX 77002
Phone: 713-483-5000
[email protected]
Emergency telephone :
number (with hours of
operation)
1-866-928-0789 (For Emergencies, call CARECHEM 24/7 Domestic)
1-215-207-0061 (For Emergencies, call CARECHEM 24/7 International)
Specific hazards arising : In a fire or if heated, a pressure increase will occur and the container may burst.
from the chemical
Hazardous thermal : carbon monoxide
decomposition products carbon dioxide
Silicon Dioxide
nitrogen oxides
phosphorus oxides
sulfur oxides
Hydrogen sulfide
Mercaptans
Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing
equipment for fire-fighters apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Conditions for safe storage, : Store in accordance with local regulations. Store in original container protected from
including any direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
incompatibilities (see Section 10) and food and drink. Keep container tightly closed and sealed until
ready for use. Containers that have been opened must be carefully resealed and kept
upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination. See Section 10 for incompatible
materials before handling or use.
Appropriate engineering : Good general ventilation should be sufficient to control worker exposure to airborne
controls contaminants.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Chemical stability : Stable under recommended storage and handling conditions (see Section 7).
Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions
Conditions to avoid : Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Reproductive toxicity Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Teratogenicity Not available.
Conclusion/Summary : Based on available data, the classification criteria are not met.
Specific target organ toxicity (single exposure)
Conclusion/Summary : Based on available data, the classification criteria are not met.
Specific target organ toxicity (repeated exposure)
Conclusion/Summary : Based on available data, the classification criteria are not met.
Date of revision : 2023/01/31 1 USA ENGLISH 6/12
EPONA SA 220
SDS # : 33477
Aspiration hazard
Conclusion/Summary : Based on available data, the classification criteria are not met.
Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Long term exposure
Potential immediate : Not available.
effects
Potential delayed effects : Not available.
Potential chronic health effects
Not available.
General : No known significant effects or critical hazards.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Reproductive toxicity : No known significant effects or critical hazards.
Other information :
Not available.
Bioaccumulative potential
Product/substance LogKow BCF Potential
Amines, C10-14-tert-alkyl 2.9 - low
Mobility in soil
Soil/water partition : Not available.
coefficient (KOC)
Mobility in soil : Given its physical and chemical characteristics, the product generally shows low soil
mobility The product is insoluble and floats on water Loss by evaporation is limited
UN proper - - -
shipping name
Transport - - -
hazard class(es)
Packing group - - -
Environmental No. No. No.
hazards
Additional information
Special precautions for user : Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.
Name % Classification
Amines, C10-14-tert-alkyl ≤0.3 FLAMMABLE LIQUIDS - Category 4
ACUTE TOXICITY (oral) - Category 4
ACUTE TOXICITY (dermal) - Category 3
ACUTE TOXICITY (inhalation) - Category 2
SKIN CORROSION - Category 1B
SERIOUS EYE DAMAGE - Category 1
SKIN SENSITIZATION - Category 1A
State regulations
Massachusetts : None of the components are listed.
New York : None of the components are listed.
New Jersey : None of the components are listed.
Pennsylvania : None of the components are listed.
California Prop. 65
To the best of our knowledge, this product does not contain any substances known to the State of California to
cause cancer, developmental and/or reproductive harm
International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Not listed.
Montreal Protocol
Not listed.
Stockholm Convention on Persistent Organic Pollutants
Not listed.
Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.
UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.
Inventory list
Australia inventory (AIIC) : All components are listed or exempted.
Canada inventory (DSL/NDSL) : All components are listed or exempted.
China inventory (IECSC) : All components are listed or exempted.
Europe inventory (EC) : All components are listed or exempted.
Japan inventory : Japan inventory (CSCL): All components are listed or
exempted.
Japan inventory (ISHL): All components are listed or
exempted.
New Zealand Inventory of Chemicals (NZIoC) : All components are listed or exempted.
Philippines inventory (PICCS) : All components are listed or exempted.
Korea inventory (KECI) : All components are listed or exempted.
Taiwan Chemical Substances Inventory (TCSI) : All components are listed or exempted.
Thailand inventory : Not determined.
Turkey inventory : Not determined.
United States inventory (TSCA 8b) : All components are listed or exempted.
Vietnam inventory : Not determined.
The information stated in this section relates solely to the conformity of the chemical product with the
countries Inventories. The information used to confirm the inventory status of this product may be based on
additional data to the chemical composition shown in Section 3. Other regulations may apply for importation
or marketing authorizations.
Flammability 1
Physical hazards 0
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks. Although HMIS® ratings and the associated label are not required on
SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS®
ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark and service
mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS®
Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.
National Fire Protection Association (U.S.A.)
1 Flammability
Health 1 0 Instability/Reactivity
Special
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is
not the complete and official position of the National Fire Protection Association, on the referenced subject
which is represented only by the standard in its entirety.
Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to
be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of
chemicals. The user is referred to certain limited number of chemicals with recommended classifications in
NFPA 49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA
or not, anyone using the 704 systems to classify chemicals does so at their own risk.
Procedure used to derive the classification
Classification Justification
Not classified.
History
Date of revision : 2023/01/31
Date of previous revision : No previous validation
Version : 1
Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973
as modified by the Protocol of 1978. ("Marpol" = marine pollution)
N/A = Not available