WORKHOLDING

Spindle
Spindle Tooling
Tooling
for
for Manual and
Manual and
CNC Lathes
CNC Lathes

Turning Milling Grinding Workholding ROTARY

www.hardinge.com
Pioneers of Spindle Tooling
Quality and Process Control

Value in Workholding
Team up with the Hardinge Workholding
Group to add value to your material-
cutting processes and assembly
operations. Work with dedicated sales,
design and application engineers to solve
difficult process problems, or choose
your standard collet or step chuck
knowing that quality and reliability comes
with the Hardinge name. Experience
value in longer lasting products, value
in machine uptime, value in workpiece
accuracy and value in your customer’s
satisfaction. Hardness, Spring and Spread
Hardinge has explored and defined A very important factor in manufacturing collets, feed fingers and pads that are long
the materials and processes to perfect lasting and provide the performance you expect is the raw material used and the heat
methods for gripping metals, wood, treat process control system to guarantee proper hardness and tempering. Collets and
feed fingers are prone to breakage where the hardened area meets the tempered
plastic and glass; holding pins, electronic
area. Hardinge heat treat processes are planned to eliminate breakage on critical
components, pill capsules and pipes;
design areas to provide a product that is not subject to breakage and wear. Hardinge
fastening tops on perfume bottles;
collets are 5 to 7 points of Rockwell "C" harder than competitor’s products to provide
crimping; and expanding plastic tubing.
a longer lasting product. The harder the collet, the longer the life, reducing collet
changeover and downtime associated with collet changing. However, if a collet is too
From bar stock to finished hard, it could be brittle and break. It is the combination of hardness, spring and spread
product – 100% Made in that Hardinge has perfected over the years at their Elmira, New York facility.
USA
Collet Concentricity Inspection
Individual care goes into every
collet, feed finger and pad, at each Concentricity is measured in terms of Total Indicator Runout (TIR) using a Hardinge
manufacturing process, from handling Super-Precision® spindle. A gage pin is inserted in the collet and the TIR is measured at
the initial bar stock to polishing and a set distance from the spindle face, depending on the order hole size, using a .00005"
laser etching. Generations of skilled- dial indicator. You can be assured of a qualified inspection – standard 5C collets
machine operators have taken part in will run .001" or better, while special accuracy collets will run .0002" or better. This
the many critical processes of producing assures that the collet will hold your part consistently during your specified machining
a hardened and ground collet. Hardinge
operations.
has been manufacturing workholding
and industrial products for all brands of
lathes, mills and grinding machines for
over a century. Their process expertise,
precision and accuracy provides a
workholding product that is world-
renowned. 2
 WORKHOLDING

Table of Contents

Collets – Precision Machined……………………………………………… 4, 5, 7

5C, 16C, 20C, 25C & 3J Collets and Collet Sets
Collet Sets
Step Collets
Extended-Nose Collets
Headstock Centers (Male Center)
Lensmaker Collets
Long Bearing Drill Collets
Emergency Collets… …………………………………………………………… 6
5C, 16C, 20C, 25C & 3J
Extended-Nose
Kellenberger 5C Collet Adaptation Chuck……………………………………… 7
Step Chucks & Closers… …………………………………………………… 8-12
5C, 16C, 20C, 25C & 3J – Precision Machined and Emergency
3C & 4C – Hardened & Ground
Collet Stops… …………………………………………………………… 13-14
Threaded Positive Solid Stops, Long Stops, Ejector Stops
5C Universal Collet Stop
16C Universal Draw Tube Stop
Dead-Length® Collets – 5C & 16C……………………………………………… 15
Dead-Length Emergency Step Chucks – 5C, 16C & 20C… …………………… 16
Dead-Length Thru-Hole Collets - 5C, 16C… ………………………………… 17
Dead-Length Collet Ejector Stops – 5C & 16C………………………………… 18
Dead-Length Spider-Stop Step Chuck – 16C…………………………………… 19
Master Collets & Pads – Style "S" Draw-In… ………………………………… 20
S10, S12, S16, S20, S22 & S26
Expanding Collets
5C & 16C Master Expanding Collets… …………………………………… 21
Model "S" Precision Expanding Collets – 5C & 16C………………………… 22
Model "S" Emergency Expanding Collets… ………………………………… 23
Sure-Grip® Expanding Collet Systems… ……………………………………… 23
Spindle Collet & Step Chuck Adapters… ……………………………………… 24
Collet Face Spanner Wrenches… ……………………………………………… 24
5C & 16C Fixture & Backing Plates… ………………………………………… 25
5C Face Plates, Angle Plates, Stub/Mill Arbors & Driver………………………… 26
5C Collet Racks… ……………………………………………………………… 27
Custom Application Manufacturing of Special Collets & Step Chucks… … 27-30
Stationary Collet Systems
B65… ………………………………………………………………… 31-33
B42… ………………………………………………………………… 34-35
#11 & #22 B&S… …………………………………………………… 36-39
2-, 3- & 4-Jaw Manual Chucks…………………………………………………… 40
Safety Information for 5C Spindle Tooling… …………………………………… 40
Collet Directory - by machine manufacturer…………………………………… 41
Collet Directory - by Style (Dimensions and Capacities)… ……………… 42-45
Frequently Asked Questions… …………………………………………… 46-47

3
Collets – Precision Machined

The Hardinge Collet is manufactured to exacting standards from special alloy steel.
Threads are heat treated and the body is spring tempered to assure accuracy and
durability at low cost. A wide range of standard sizes and shapes (and some not so
standard) are available for off-the-shelf delivery. 5C decimal collets are available in .001"
increments from .015" up to and including 1.0625". All collets are available in fractional
sizes of round, hexagon and square to capacity. In addition, many round collets are
stocked in metric, decimal, letter and number sizes. Most of the popular sizes of round
serrated, taper hole and rectangular collets are available from stock. Many collets
include precision internal threads for the Hardinge threaded positive stops.

Dimensions and Capacities

Dimensions Capacity
A B C D
Back Bearing Overall Head
Diameter Length Thread Diameter Round Hex Square
5C 1.250" (31.75) 3.281" (83.34) 1.238" x 20 RH1 1.468" 11⁄16" (26.99) 29
⁄32" (23.02) 3
⁄4" (19.05)
16C 1.889" (47.98) 4.312" (109.52) 1.870" x 1.75mm RH1 2.265" 15⁄8" (41.28) 113⁄32" (35.72) 19⁄64" (28.97)
20C 2.378" (60.40) 6.250" (158.75) 2.359" (M60x1.5mm RH)1 2.880" (73.15) 2" (50.80) 13⁄4" (44.45) 127⁄64" (36.07)
25C 2.930" (74.42) 6.480" (161.59) 2.871" (M73x1.5mm RH)1 3.470" (88.14) 2.559" (65.00) 2.216" (56.29) 1.808" (43.95)
3J 2.000" (50.80) 3.750" (95.25) 1.988" x 20 RH 2.205" 13⁄4" (44.45) 117⁄32" (38.89) 11⁄4" (31.75)
1 - Internal Stop Thread: (5C: 1.041" x 24 RH), (16C: 1.687" x 20 TPI RH), (20C: M53 x 1mm RH), (25C : 25⁄8" x 24 TPI RH), (3J : 1.79" x 24 TPI RH).

Special-Accuracy 5C Precision
1 2 Machined Collets are available.
5C Precision Machined Collets When held in a Hardinge Super-
Description Part Number Figure Size Range Precision® spindle, they are
guaranteed to have a maximum
Special Accuracy 1003-00-00-000000 1 ⁄ " to 11⁄16" , Decimal, Metric & Fractional Sizes
1 64
TIR of .0002" for 5C round
Round Fractional 1001-00-19-000000 1 1⁄64" to 11⁄16" inclusive by 1⁄64" increments
collets, and .0005" for 16C, 20C
Hexagon Fractional 1001-00-29-000000 1 1⁄16" to 7⁄8" inclusive by 1⁄64" increments
and 25C round collets over 3⁄16"
Square Fractional 1001-00-39-000000 1 3
⁄64" to 3⁄4" inclusive by 1⁄64" increments (4.76mm) to the collet’s capacity
Round Metric 1001-00-17-000000 1 .5mm to 27mm inclusive by .5mm increments 1 measured 1" from the face of
Round Decimal 1001-00-18-000000 1 .016" to 1.030" inclusive by .001" increments 1 the collet.
Round Serrated Fractional 1001-00-59-000000 1 1⁄4" to 11⁄64" inclusive by 1⁄64" increments 1

Morse Taper Hole 1005-08-80-000000 2 #1, #2, #3, #4

B & S Taper Hole 1005-09-80-000000 2 #4, #5, #6, #7, #9
Rectangular 1001-00-49-000000 1 1
⁄8" x 5⁄32" to 5⁄8" x 3⁄4" inclusive
NOTE: Round 5C collets above 63⁄64", hex collets 55⁄64" and above, square 5C collets 23⁄32" and over, 5C number collets
and letter collets do not have internal threads. For internal threads, see 5C-SC step collets.

16C, 20C, 25C, 3J Precision Machined Collets

Type 16C Part No. Size Range 20C Part No. Size Range 25C Part No. Size Range 3J Part No. Size Range
Round Fractional 1717-00-19 1
⁄16" – 15⁄8" [1⁄64"] 1701-00-19 1
⁄16" – 2" [1⁄32"] 1801-00-19 1
⁄4" – 235⁄64" [1⁄64"] 1593-00-19 ⁄64" – 13⁄4" [1⁄64"]
1

Hexagon Fractional 1717-00-29 1

⁄8" – 1 ⁄8" [ ⁄16"]
3 1
1701-00-29 1
⁄4"– 13⁄4" [1⁄16"] 1801-00-29 1
⁄2" – 23⁄16" [1⁄16"] 1593-00-29 3
⁄16" – 11⁄2" [1⁄16"]
Square Fractional 1717-00-39 1
⁄8" – 13⁄16" [1⁄16"] 1701-00-39 1
⁄4"– 13⁄8" [1⁄16"] 1801-00-39 1" – 13⁄4" [1⁄16"] 1593-00-39 1
⁄4" – 11⁄4" [1⁄16"]
Round Metric 1717-00-17 1mm–42mm [1mm] 1701-00-17 7mm–51mm [1mm] 1801-00-17 15mm–65mm [1mm] 1593-00-17 5–40mm [1mm]
Hex Metric 1717-00-27 3mm–36mm [1mm] 1701-00-27 6mm–40mm [1mm] — — — —
Square Metric 1717-00-37 3mm–29mm [1mm] — — — — — —
Rd. Serrated Fractional 1717-00-59 5
⁄16" – 15⁄8" [1⁄32"] 1701-00-59 1
⁄2"– 2" [1⁄16"] 1801-00-59 1
⁄2" – 21⁄2" [1⁄16"] 1593-00-59 3
⁄8" – 15⁄8" [1⁄32"]
Round Serrated Metric 1717-00-57 12mm–42mm [.5mm] 1701-00-57 10mm–50mm [1mm] 1801-00-57 15mm–65mm [1mm] — —
NOTE: Increments in brackets. 3J Collets 1⁄64" and under are 3 split. 3J Collets over 123⁄32" do not have internal stop threads.
16C Collets 1.615" and over do not have internal stop threads. 16C Collets are four split.

4
 WORKHOLDING

Collets – Precision Machined

Sets, Stepped & Extended-Nose
Hardinge Special-Accuracy 5C Collet Sets are enclosed in a handsome walnut case with a certificate of
accuracy signed by the President of Hardinge. Each collet in the set is tested in a Hardinge spindle and
guarantees a maximum TIR of .0002" (.005mm). Sets are available in 1⁄64", 1⁄32" and .5mm increments.

Standard-Accuracy Sets are available for 5C, 16C, 20C and 25C collets. These sets include our
standard collets attractively priced and packaged in quantities that will outfit your machine nicely.
Walnut box not included with Standard Accuracy Sets - see collet racks on page 27.
Collet Sets
Part Number: Part Number:
All Sizes With Above 63⁄64" Have Stocked
Type Internal Stop Threads No Internal Threads Increment Quantity Size & Range
5C – Round Fractional 0901-07-00-000000 0901-00-00-000000 ⁄ "
1 64 65 collets ⁄ " to 11⁄16"
1 16 Standard Accuracy
5C – Round Fractional 0903-07-00-000000 0903-00-00-000000 ⁄ "
1 64 65 collets ⁄ " to 11⁄16"
1 16 Special Accuracy (.0002" TIR)
5C – Round Fractional 0902-07-00-000000 0902-00-00-000000 1⁄32" 33 collets 1⁄16" to 11⁄16" Standard Accuracy
5C – Round Fractional 0904-07-00-000000 0904-00-00-000000 1
⁄32" 33 collets 1
⁄16" to 11⁄16" Special Accuracy (.0002" TIR)
5C – Round Metric 0908-07-00-000000 0908-00-00-000000 .5mm 51 collets 2mm to 27mm Standard Accuracy
5C – Round Metric 0909-07-00-000000 0909-00-00-000000 .5mm 51 collets 2mm to 27mm Special Accuracy (.005mm TIR)
16C – Round Fractional 0913-00-00-000000 — 1
⁄8" 8 collets 1
⁄8" – 11⁄2" Standard Accuracy
16C – Round Fractional 0915-00-19-000000 — 1
⁄8" 12 collets 1
⁄4"– 15⁄8" Standard Accuracy
16C – Round Fractional 0917-00-19-000000 — 1
⁄16" 23 collets 1
⁄4" – 15⁄8" Standard Accuracy
20C – Round Fractional 0919-00-19-000000 — 1
⁄8" 16 Collets 1
⁄8" – 2" Standard Accuracy
20C – Round Fractional 0921-00-19-000000 — 1
⁄16" 31 collets 1
⁄8" – 2" Standard Accuracy
25C – Round Fractional 0925-00-19-000000 — 1
⁄16" 33 collets 1
⁄2" – 21⁄2" Standard Accuracy
25C – Round Fractional 0923-00-19-000000 — 1
⁄8" 17 collets 1
⁄2" – 21⁄2" Standard Accuracy

Step Collets – 5C-SC and 16C-SC

Type Part Number Size Range "A" Max Depth "B" Length
5C Round 1001-07-19- 1" to 11⁄16" 23⁄8" (60.33) 3
⁄4" (19.05)
5C Round 1001-07-19- 15⁄64" to 11⁄8" 11⁄2" (38.10) 1" (25.40)
5C Hexagon 1001-07-29- 55⁄64" to 29⁄32" 23⁄8" (60.33) 3⁄4" (19.05)
5C Hexagon 1001-07-29- 15⁄16" to 31⁄32" 11⁄2" (38.10) 1" (25.40)
5C Hexagon 1001-07-29- 1" 1
⁄2" (12.70) 1
⁄2" (12.70)
The SC Step Collet 5C Square 1001-07-39- 23
⁄32" to 3⁄4" 23⁄8" (60.33) 3
⁄4" (19.05
permits the use of the 16C Round 91717-07-19- Over 15⁄8" to 111⁄16" inclusive 27⁄8" (73.03 13⁄8" (34.93)
Hardinge threaded 16C Round 91717-07-19- Over 111⁄16" to 13⁄4" Inclusive 13⁄4" (44.45) 13⁄4" (44.45)
positive stops. The step 16C Hexagon 91717-07-29- Over 113⁄32" to 125⁄64" inclusive 27⁄8" (73.03) 13⁄8" (34.93)
depth varies depending 16C Hexagon 91717-07-29- Over 129⁄64" to 133⁄64" inclusive 13⁄4" (44.45) 13⁄4" (44.45)
on the collet capacity. 16C Square 91717-07-39- Over 19⁄64" to 13⁄16" inclusive 27⁄8" (73.03) 13⁄8" (34.93)
16C Square 91717-07-39- Over 13⁄16" to 115⁄64" inclusive 13⁄4" (44.45) 13⁄4" (44.45)
NOTE: Millimeters in parentheses. 5C-SC step collets have internal stop threads.
Part numbers preceeded by 9 are special order.

5C Extended-Nose Collets (TIR: .001", 1⁄2" from Face)

Type Part Number Figure Size Range “A" Maximum Depth
Round Fractional 8015-00-19- ⁄16" to 11⁄4" [1⁄64"]
1

1 1⁄16" to 23⁄32" 1 Thru Hole; No Step

1 3⁄4" to 11⁄16" 1 2" (50.80)
5C Precision Machined 2 11⁄8" to 11⁄4" 11⁄2" (38.10)
Extended Nose Collets Round Metric 8015-00-17- 2mm to 32mm [.5mm]
are for the same applications as regular 1 3mm to 18mm1 Thru Hole; No Step
collets. The extended-nose permits 1 20mm to 28mm1 2" (50.80)
deeper counter-bores and tool clearance 2 28mm to 32mm 11⁄2" (38.10)
for extended work. Extended-nose NOTE: Increments in brackets. Special Accuracy Collet now available in 8015 style.
collets have internal threads for Hardinge 1 - Diameter of face is order hole plus 1⁄4" (6.35mm).
positive stops.
1 2
5
Emergency Collets

Even with the best of planning, emergencies arise when your tool room
Pin and production departments require a stepped, odd size or special-shape
collet. On such occasions, use the Hardinge® Emergency Collet. The soft
face and pilot hole permit rapid drilling, boring or stepping out to the
exact size required. Pins are supplied for precision machining. Emergency
collets have internal threads for positive stops.

Extended-Nose Emergency Collets permit deeper counterbores

when required, and tool clearance for extended work. Extended-nose
emergency collets also have internal threads for positive stops. The
collet shank section of a 5C Emergency Plug Chuck is finished for direct
application to your machine spindle. The nose section can be machined
in place for the greatest degree of accuracy to suit your particular
requirements for special arbors.
Emergency Collets – 3C & 5C
3C Model Part Number 5C Model Part Number Material Pilot Hole Slots
3C Blank 1583-10-00 5C Blank 1001-10-00-000000 Steel — —
3C-E1 1585-12-10  5C-E1 1007-12-10-000000 Steel 1
⁄16" (1.59) Specify 3 or 4
— — 5C-E1 1013-12-10-000000 Brass ⁄ " (1.59)
1 16 3
3CE 1585-14-10  — — Steel 1⁄4" (6.35) 4
3C-E2 1585-13-00  5C-E2 1007-13-10-000000 Steel 1⁄8" (3.18) 3
— — 5C-E2 1007-13-10-000004 Steel 1
⁄8" (3.18) 4
— — 5C-E2 1013-13-10-000000 Brass 1
⁄8" (3.18) 3
3C-E0 1585-11-00 5C-E0 1007-11-00-000000 Steel — 3

Emergency Collets – Extended-Nose Emergency Collets

16C, 20C, 25C & 3J Model Part Number Pilot Hole “A" Length

Model Part Number Pilot Hole 3C Emergency Collets - 3 Slots

3C-EN1 1795-14-10- 1
⁄4" (6.35) 1" (25.40)
16C Emergency Collets - 3 Slots 3C-EN1-2 1795-13-10- 1
⁄8" (3.18) 1" (25.40)
16C-E 1717-14-00-000000 1
⁄4" (6.35) 3C-EN2 1797-14-10- 1⁄4" (6.35) 1⁄2" (12.70)

16C-E1 1717-12-00-000000 1
⁄16" (1.59)
5C Emergency Collets - 3 Slots
16C-E2 1717-13-00-000000 1⁄8" (3.18
5C-EN1 1009-14-10-000000 14 ⁄ " (6.35) 1" (25.40)
16C-E0 1717-11-00-000000 —
5C-EN1-1 1009-12-10-000000 ⁄ " (1.59)
1 16 1" (25.40)
20C Emergency Collets - 4 Slots 5C-EN1-2 1009-13-10-000000 1⁄8" (3.18) 1" (25.40)
20C-E 1701-14-10-000000 14 ⁄ " (6.35) 5C-EN2 1011-14-10-000000 1
⁄4" (6.35) 1
⁄2" (12.70)
20C-E0 1701-11-00-000000 — 5C-EN2-1 1011-12-10-000000 1
⁄16" (1.59) 1
⁄2" (12.70)
25C Emergency Collets - 4 Slots 5C-EN2-2 1011-13-10-000000 1⁄8" (3.18) 1⁄2" (12.70)

25C-E 1801-14-10-000000 ⁄2" (12.70)

1
3C & 5C Emergency Plug Chuck - Solid
25C-E0 1801-11-00-000000 — 3C Plug 1587-00-00- — 1" (25.40)
3J Emergency Collets - 4 Slots 5C Plug 1015-00-00-000000 — 13⁄4" (44.45)
3J-E 1595-14-10-000000 14 ⁄ " (6.35) 16C Emergency Collets - 3 Slots
3J-E1 1595-12-10-000000 1 16⁄ " (1.59) 16C-EN1 1717-12-13-000000 1
⁄4" (6.35) 1" (25.40)
Replacement Pins 16C-EN1-1 1717-13-13-000000 1
⁄16" (1.59) 1" (25.40)
3C 7721-00-00 — 16C-EN1-2 1717-14-13- 1⁄8" (3.18) 1" (25.40)
5C, 16C, 20C &3J 7723-00-00 — 16C-EN2 1717-12-14- 1⁄4" (6.35) 1⁄2" (12.70)

25C 7725-00-00 — 16C-EN2-1 1717-13-14- 1⁄16" (1.59) 1⁄2" (12.70)

16C-EN2-2 1717-14-14- 1⁄8" (3.18) 1⁄2" (12.70)

NOTE: Millimeters in parentheses.
3J Collets 1⁄16" and under are 3 split. 20C Emergency Collets - 4 Slots
3J Collets over 123⁄32" have no internal thread. 20C-EN .75 1809-14-10- 14 ⁄ " (6.35) 3⁄4" (19.05)

Emergency collets not intended to be heat treated. 20C-EN 1.5 1811-14-10- 14 ⁄ " (6.35) 11⁄2" (38.10)
A
3J Emergency Collets - 4 Slots
3J-EN1 1593-12-13- 1
⁄4" (6.35) 1" (25.40)
3J-EN2 1593-12-14- 14 ⁄ " (6.35) ⁄ " (12.70)
12

Replacement Pins
All Sizes 7731-00-00 — —

6
 WORKHOLDING

Collets - Precision Machined

Kellenberger Adapter & Collets for Grinding Applications

Kellenberger 5C Collet Adaptation Chuck

An adapter with draw tube permits the use of 5C spindle
tooling on Kellenberger grinding machines. Use with collets,
step chucks and Sure-Grip expanding collet systems. This
system features the standard Hardinge threaded-nose
design.
Part Number 0957-00-00-000000
Standard 5C
Spindle Tooling

Spindle Nose

Draw Tube & Bushing

Adapter

Headstock Centers – Male Center

Style Model Part Number B E F G
5C G9-5C 57-0000296 39⁄32" (81.35) 19⁄32" (30.93) .570" (14.47) 1.470" (37.33)
16C AK-7 AK-0000296-16C 4.344" (110.33) 1.250" (31.75) .570" (14.47) 2.250" (57.15)
20C AK-13 AK-0000296-20C 4.940" (125.47) 1.250" (31.75) .570" (14.47) 2.880" (73.15)
25C AK-19 AK-0000296-25C 5.000" (127.00) 1.250" (31.75) .570" (14.47) 3.464" (87.98)
NOTE: Millimeters in parentheses.

5C LensMaker Collets
Collet Part Number Diameter Depth
5C LM (3 Split) 8277-01-18-005010 .501" ⁄ "
1 16

5C LM (3 Split) 8277-02-18-005010 .501" ⁄"

18 8

5C LM (6 Split) 8279-01-18-005010 .501" ⁄ "

1 16

5C LM (6 Split) 8279-02-18-005010 .501" 1

⁄8"8

5C-ST Long Bearing Drill Collets – Precision Machined

Type Part Number Size Range
Letter 1017-00-16- A to Z inclusive
Number 1017-00-15- 1 to 78 inclusive
Fractional 1017-00-19- 1
⁄64" to 11⁄16" inclusive by 1⁄64" increments
Metric 1017-00-17- 3mm to 25mm by .5mm increments
NOTE: 5C-ST collets have longer bearing surface than standard 5C collets and do not have internal stop threads.

7
Step Chucks & Closers

Step Chucks are used for accurately holding work up to 6" in diameter.
Castings, moldings, stampings and machined parts are held rigidly and accurately.
Tubing can be held without crushing or distorting. Accurate gripping, the same
as with collets, is yours when you use regular- and extra-depth capacity step
chucks for holding larger diameters.

Regular-Depth Step Chucks are 3⁄8" larger in diameter than the rated size so
the full capacity may be readily applied to a depth of 1⁄2". A regular-depth step
chuck closer is required for each rated size.

Extra-Depth Step Chucks are made so the full rated capacity may be applied
to a depth of 11⁄4". An extra-depth step chuck closer is required for each rated
size. Small closing angles are available on step chucks for non-rotating use.

Step Chuck Closers are required when using step chucks on rotating spindles. Step chuck closers fit directly to the
machine spindle. An inside taper corresponding to that on the step chuck places the closing pressure over the stepped
area of the chuck, resulting in greater gripping power and accuracy. When ordering step chuck closers, specify for taper
or threaded nose for 5C models or A2-4, A2-5, A2-6, A2-8 spindle noses. A step chuck closer is required for each
rated size step chuck. The closer mounts directly on the spindle nose.

5C Regular-Depth Step Chucks and Closers – 1⁄2" / 12.70mm Maximum Depth of Stop
Step Chuck Closer2
Rated Size Small
Dia. x Depth Part Number Figure Material Slots Closing Angle Taper Threaded
2" x 1⁄2" 1389-00-19-0000001 1 Steel 3 Yes 1421-26-00-000000 1421-00-00-000000
3" x 1⁄2" 9-1483-00-00-00000 2 Steel 3 No 1423-26-00-000000 1423-00-00-000000
4" x 1⁄2" 9-1485-00-00-00000 2 Steel 3 No 1425-26-00-000000 1425-00-00-000000
5" x 1⁄2" 9-1487-00-00-00000 2 Steel 3 No 1427-26-00-000000 1427-00-00-000000
6" x 1⁄2" 9-1489-00-00-00000 2 Steel 3 No 1429-26-00-000000 1429-00-00-000000
1 - Available in round sizes 11⁄16" to 2" inclusive by 1⁄16" increments. Spanner Wrench for Step Chuck Closers Part #460-0009189
2 - For Emergency and Hardened and Ground Step Chucks.
NOTE: Part numbers preceded by a 9 are special order.

1 2

5C Extra-Depth Step Chucks and Closers – 11⁄4" / 31.75mm Maximum Depth of Stop
Step Chuck Closer2
Rated Size Small
Dia. x Depth Part Number Material Slots Closing Angle Taper Threaded
2" x 11⁄4" 1391-00-19-0000001 Steel 3 No 1433-26-00-000000 1433-00-00-000000
3" x 11⁄4" 9-1491-00-00-00000 Steel 3 No 1435-26-00-000000 1435-00-00-000000
4" x 11⁄4" 9-1493-00-00-00000 Steel 3 No 1437-26-00-000000 1437-00-00-000000
5" x 11⁄4" 9-1495-00-00-00000 Steel 3 No 1439-26-00-000000 1439-00-00-000000
6" x 11⁄4" 9-1497-00-00-00000 Steel 3 No 1441-26-00-000000 1441-00-00-000000
1 - Available in round sizes 11⁄8" to 2" inclusive by 1⁄16" increments. Spanner Wrench for Step Chuck Closers Part #460-0009189
2 - For hardened & ground and emergency step chucks.
NOTE: Part numbers preceeded by a 9 are special order.

CAUTION: Closers are required for all rotating step chuck

applications. See page 40 for spindle rpm safety information.

8
 WORKHOLDING

Step Chucks & Closers

5C Emergency

Emergency Step Chucks are made for those situations where time does not allow for the ordering of a precision machined step
chuck. Emergency step chucks are supplied with pin holes and pins in place for precision machining. Pins are located beyond the
maximum rated capacity of the step chuck—this permits stepping the chuck to its full capacity without cutting into the pins. Pins can
be used, removed and saved for additional stepping operations.

Regular-Depth Step Chucks are 3⁄8" larger, while Extra-Depth Step Chucks are 3⁄4" larger in diameter than the rated size so the full
capacity bore may be easily machined. A regular-depth step chuck can be bored to a maximum depth of 1⁄2", the extra-depth step
chuck to a maximum depth of 11⁄4" with 13⁄4" step for the 25C step chuck. A regular- or extra-depth step chuck closer is required for
each rated size.
Hardinge Emergency Step Chucks are not designed to be heat treated by the customer. Step chucks with small closing angles are available for use with stationary (non-rotating) workholding
devices only. All 5C taper and threaded-nose closers are made from cast iron. All other closers are made of steel.

5C Emergency Regular-Depth Step Chucks and Closers – 1⁄2" / 12.70mm Maximum Depth
Step Chuck Closer
Rated Size Small
Dia. x Depth Part Number Figure Material Slots Closing Angle Taper Threaded
2" x ⁄ "
12 1351-00-10-000000 1 Steel 3 Yes 1421-26-00-000000 1421-00-00-000000
2" x 1⁄2" 1351-25-00-000000 2 Steel — Yes 1421-26-00-000000 1421-00-00-000000
2" x 1⁄2" 1377-00-10-000000 1 Steel 4 Yes 1421-26-00-000000 1421-00-00-000000
3" x 1⁄2" 1353-00-10-000000 1 Steel 3 Yes 1423-26-00-000000 1423-00-00-000000
4" x 1⁄2" 1355-00-10-000000 1 Steel 3 Yes 1425-26-00-000000 1425-00-00-000000
4" x 1⁄2" 1369-00-10-000000 3 Steel 3 No 1425-26-00-000000 1425-00-00-000000
5" x 1⁄2" 1357-00-10-000000 1 Steel 3 Yes 1427-26-00-000000 1427-00-00-000000
5" x 1⁄2" 1371-00-10-000000 3 Steel 3 No 1427-26-00-000000 1427-00-00-000000
6" x 1⁄2" 1359-00-10-000000 1 Steel 3 Yes 1429-26-00-000000 1429-00-00-000000
6" x 1⁄2" 1373-00-10-000000 3 Steel 3 No 1429-26-00-000000 1429-00-00-000000
7" x 1⁄2" 1375-00-10-000000 3 Steel 3 No 1431-26-00-000000 1431-00-00-000000
Replacement Pins Part #7723-00-00-000000. Spanner Wrench for Step Chuck Closers Part #460-0009189.

1 2 3

5C Emergency Extra-Depth Step Chucks and Closers – 11⁄4" / 31.75mm Maximum Depth
Step Chuck Closer
Rated Size Small
Dia. x Depth Part Number Figure Material Slots Closing Angle Taper Threaded
2" x 1 ⁄4"
1
1379-00-10-000000 1 Steel 3 Yes 1433-26-00-000000 1433-00-00-000000
2" x 11⁄4" 1379-25-00-000000 2 Steel — Yes 1433-26-00-000000 1433-00-00-000000
3" x 11⁄4" 1381-00-10-000000 3 Steel 3 No 1435-26-00-000000 1435-00-00-000000
4" x 11⁄4" 1383-00-10-000000 3 Steel 3 No 1437-26-00-000000 1437-00-00-000000
5" x 11⁄4" 1385-00-10-000000 3 Steel 3 No 1439-26-00-000000 1439-00-00-000000
6" x 11⁄4" 1387-00-10-000000 3 Steel 3 No 1441-26-00-000000 1441-00-00-000000
Replacement Pins Part #7723-00-00-000000. Spanner Wrench for Step Chuck Closers Part #460-0009189.

1 2 3

CAUTION: Closers are required for all rotating step chuck applications. See page 40 for spindle rpm safety information.

9
Step Chucks & Closers
Emergency 5C - A2-5, A2-4

Hardinge® Emergency Step Chucks used on A2-5 and A2-4 5C spindles have the
same criteria as regular step chucks except the shank is longer. The closers are
made of steel.

• The A2-4 Closer is used on the Hardinge CONQUEST® GT Lathe

• The A2-5 Closer is used on the Hardinge CHNC®-5C and HXL
A2-5 5C spindle – the same closer used on all A2-5, 16C Spindles
Because these 5C Step Chucks have a longer shank than standard 5C Step Chucks, they can only be used on Hardinge
CONQUEST GT, CHNC-5C and HXL A2-5 5C lathes. A2-4 and A2-5 hardened and ground step chucks are available
as special orders.

A2-5 and A2-4 — 5C Emergency Regular-Depth Step Chucks & Closers

⁄ " / 12.70mm Maximum Depth
12

Step Chuck Closer

Rated Size Small
Dia. x Depth Part Number Figure Material Slots Closing Angle A2-5 CHNC-5C & HXL-5C A2-4 CONQUEST GT

2" x ⁄ "
12 1263-00-00-000000 1 Steel 3 No 16-0002682 5-0002682
3" x 1⁄2" 1251-00-00-000000 1 Steel 3 No 16-0002683 5-0002683
4" x 1⁄2" 1265-00-00-000000 1 Steel 3 No 16-0002684 5-0002684
5" x 1⁄2" 1253-00-00-000000 1 Steel 3 No 16-0002685 —
6" x 1⁄2" 1255-00-00-000000 1 Steel 3 No 16-0002686 —
NOTE: The shank of these step chucks are longer than standard 5C step
chucks. Replacement Pins Part #7723-00-00-000000.

A2-5 and A2-4 – 5C Emergency Extra-Depth Step Chucks & Closers

11⁄4" / 31.75mm Maximum Depth
Step Chuck Closer
Rated Size Small
Dia. x Depth Part Number Figure Material Slots Closing Angle A2-5 A2-4 CONQUEST GT
2" x 11⁄4" 1267-00-00-000000 2 Steel 3 No 16-0002682-OC 5-0002682-OC
3" x 11⁄4" 1257-00-00-000000 2 Steel 3 No 16-0002683-OC 5-0002683-OC
4" x 11⁄4" 1269-00-00-000000 2 Steel 3 No 16-0002684-OC 5-0002684-OC
5" x 11⁄4" 1259-00-00-000000 2 Steel 3 No 16-0002685-OC —
6" x 11⁄4" 1261-00-00-000000 2 Steel 3 No 16-0002686-OC —
NOTE: The shank of these step chucks are longer than standard 5C step Bolts for Closers:
chucks. Replacement Pins Part #7723-00-00-000000. A2-4 & A2-5 Part # – MS-0104019
(M10 x 1.5 x 25)
CAUTION: Closer required for all rotating step chuck applications.

10
 WORKHOLDING

Step Chucks & Closers

16C A2-5 Precision Machined – 16C A2-5, 3J Emergency

16C Precision Machined Regular-Depth Step Chucks

& A2-5 Closers – 1⁄2" / 12.70mm Maximum Depth
Step Chuck Closer
Size Part Number Figure Part Number Figure
2" 9-1273-00-00-00000 1 16-0002682 2
3" 1215-00-19-0000001 1 16-0002683 2 1 2
4" 9-1217-00-00-00000 1 16-0002684 2
5" 9-1219-00-00-00000 1 16-0002685 2
6" 9-1221-00-00-00000 1 16-0002686 2
1 - Available from stock in round sizes 19⁄16" to 3" inclusive by 1⁄16" increments.
NOTE: All closers made of steel. Part numbers preceded by a 9 are special order.

16C Precision Machined Extra-Depth Step Chucks

& A2-5 Closers – 11⁄4" / 31.75mm Maximum Depth
Step Chuck Closer
Size Part Number Figure Part Number Figure
2" 9-1277-00-00-00000 3 16-0002682-OC 4 3 4
3" 9-1223-00-00-00000 3 16-0002683-OC 4
4" 9-1225-00-00-00000 3 16-0002684-OC 4
5" 9-1227-00-00-00000 3 16-0002685-OC 4
6" 9-1229-00-00-00000 3 16-0002686-OC 4
NOTE: All closers made of steel. Part numbers preceded by a 9 are special order.
CAUTION: Closer required for all rotating step chuck applications.

16C & 3J Emergency Regular-Depth Step Chucks &

16C A2-5 Closers – 1⁄2" / 12.70mm Maximum Depth
16C Step Chuck Figure A2-5 Closer Figure 3J Step Chuck Figure
Size Part Number Part Number Part Number 5 6
2" 1275-39-00-000000 5 16-0002682 6 1597-00-10-000000 7
3" 1231-39-00-000000 5 16-0002683 6 1599-00-10-000000 7
4" 1233-39-00-000000 5 16-0002684 6 1649-00-00-000000 7
5" 1235-39-00-000000 5 16-0002685 6 1725-00-00-000000 7
7
6" 1237-39-00-000000 5 16-0002686 6 1659-00-00-000000 7
NOTE: All closers made of steel. 3J Step Chucks do not require a closer. Replacement Pins Part #7723-00-00-000000.
WARNING: 3J step chucks have no large closing angle, therefore, centrifugal force will severely reduce gripping force
as the rpm increases

16C, 20C and 25C Emergency Extra-Depth Step Chucks & Closers (A2-5, A2-6, A2-8)
Dim. 16C 1-1/4" 20C 1-1/4" 25C 1-3/4" 16C - A2-5 20C - A2-6 25C A2-6/A2-8
& Step Chuck Step Chuck Step Chuck Closer Closer Closer
Size Part Number Part Number Part Number Fig. Part Number Part Number Part Number Fig.
— — Quest® Others —
2" 1281-39-00- — — 3 16-0002682-OC — A2-6 A2-8 4
3" 1241-39-00- 1283-00-00- — 3 16-0002683-OC 20-0002683-OC — — 4
4" 1243-39-00- 1285-00-00- 1287-00-00- 3 16-0002684-OC 20-0002684-OC 2995-00- 1443-00- 4
5" 1245-39-00- — — 3 16-0002685-OC — — — 4
6" 1247-39-00- 1289-00-00- 1293-00-00- 3 16-0002686-OC 20-0002686-OC 2997-00- 1445-00- 4
8" OA OA 1447-00-10- 3 OA OA 2999-00- 1449-00- 4
NOTE: Millimeters in parentheses. OA = On Application. Replacement Pins Part #7723-00-00-000000.
Emergency step chucks not intended to be heat treated.

Closer Mounting Bolt Part No.

3 4
16C 0101216
20C MS-0104219
25C MS-0104620
CAUTION: Closer required for all rotating step chuck applications. 11
Step Chucks & Closers

Emergency step chucks are made of soft, machineable steel; closers are made of
cast iron. Step chucks with small closing angles are available for use in stationary
(non-rotating) workholding devices. Contact us for more information.

1300-series part numbers listed below are Hardinge® standard 3C and 4C Step
Chucks made to order – other models will be quoted upon application.

3C & 4C Regular-Depth Step Chucks & Closers

Step Chuck Closer (Fig. 5)
Rated Size Standard Small
& Type Item Part Number Figure Slots Closing Angle Taper Threaded
2" 3C x 1301-00-10-000000 1 3 Yes 1401-26-00-000000 1401-00-00-000000
2" 3C HS-4300 2 — Yes 1401-26-00-000000 1401-00-00-000000
3" 3C HS-4301 3 — No 1403-26-00-000000 1403-00-00-000000
3" 3C x 1307-00-10-000000 4 3 No 1403-26-00-000000 1403-00-00-000000
4" 3C HS-4302 3 — No 1405-26-00-000000 1405-00-00-000000
4" 3C x 1309-00-10-000000 4 3 No 1405-26-00-000000 1405-00-00-000000
5" 3C HS-4303 3 — No 1407-26-00-000000 1407-00-00-000000
5" 3C 37 -2625-A 4 3 No 1407-26-00-000000 1407-00-00-000000
6" 3C HS-4304 3 — No
6" 3C 37-0002626-A 4 3 No
2" 4C x 1320-00-00-000000 2 — Yes 1411-26-00-000000 1411-00-00-000000
2" 4C x 1321-00-10-000000 1 3 Yes 1411-26-00-000000 1411-00-00-000000
3" 4C HS-4306 3 — No 1413-26-00-000000 1413-00-00-000000
3" 4C x 1323-00-10-000000 2 3 No 1413-26-00-000000 1413-00-00-000000
4" 4C 8946D 3 — No 1415-26-00-000000 1415-00-00-000000
4" 4C 47-2624-A 4 3 No 1415-26-00-000000 1415-00-00-000000
5" 4C HS-4308 3 — No 1417-26-00-000000 1417-00-00-000000
5" 4C 47-2625-A 4 3 No 1417-26-00-000000 1417-00-00-000000
6" 4C HS-4309 3 — No

CAUTION: Closers are required for all rotating step chuck applications. See page 40 for spindle rpm safety information.

1 2 3 4 5

Threaded Closer

12
 WORKHOLDING

Collet Stops
5C, 16C, 20C, 25C and 3J

Threaded Positive Solid Stops

Style Description Part Number Model “A" Depth The standard Hardinge® collet comes with a
deep precision-threaded section at the rear of
5C Solid Stop Assembly 1049-00-00-000000 SS-5C 31⁄8" (73.38)
— Body 1051-00-00-000000 the capacity bore to permit the use of Hardinge
— Nut 5A-0001466-C positive solid and ejector stops. Purchase a
— Threaded Stop1 1053-00-00-000000 standard collet and it is always ready for stop
16C Solid Stop Assembly 1805-00-00-000000 SS-16C 33⁄4" (95.25) work since the threaded capacity bore is found in
— Body 1807-00-00-000000 all fractional, decimal, hexagon, square, rectangular
— Nut 1185-00-00-000000 and emergency Hardinge collets within the
— Threaded Stop1 1183-02-00-000000 ranges listed. The Hardinge solid, ejector and long
16C Adapter-Style Assembly 1199-00-00-000000 33⁄4" (95.25) threaded stops are threaded into and positively
— Body 1051-00-00-000000 locked against the end of the collet. Once locked
— Adapter Bushing 1155-01-00-000000
— Nut 5A-0001466-C
in place, the stop cannot move even under heavy
— Threaded Stop (1⁄2" diameter)1 1071-00-00-000000 drilling or other end-working pressures. The three
16C Adapter Bushing 1155-01-00-000000 types of stops permit a wide variety of chucking
Used with the 5C Solid Stop Assembly work since all are adjustable and machinable
20C Solid Stop Assembly 1279-00-00-000000 20C-SS 57⁄8" (149.23) for the desired part length to the maximum
— Body 1278-00-00-000000 workpiece depths indicated.
— Nut 1185-00-00-000000
— Threaded Stop1 1271-00-00-000000
25C Solid Stop Assembly 1073-00-00-000000 25C-SS 61⁄8" (155.58)
— Body 1075-00-00-000000
— Nut 1185-00-00-000000
— Threaded Stop1 1271-00-00-000000
3J Solid Stop Assembly 1999-00-00-000000 — 3" (76.2)
— Body 1051-00-00-000000
— Adapter Bushing 1995-00-00-000000
— Threaded Stop1 ( 1⁄2" Dia.) 1071-00-00-000000
— Nuts [2] 5A-0001466-C

Long Stops
5C 16C 20C & 25C 3J
Style Part Number Part Number Part No. Part Number
Long Stop Asm. 1067-00-00-000000 1213-00-00-000000 N/A 2003-00-00-000000 16C Adapter-style Solid Stop Assembly
Model LS-5C LS-16C — —
"A" Depth 71⁄2" (190.50) 71⁄4" (184.15) — 77⁄8" (200)
— Body 1069-00-00-000000 1181-02-00-000000 — 1997-00-00-000000
— Thrd. Stop1 1071-00-00-000000 1183-02-00-000000 — 1183-02-00-000000
— Nut 5A-0001466-C 1185-00-00-000000 — 1185-00-00-000000
1- Threaded stops can be altered to different lengths. NOTE: Millimeters in parentheses.

Long Stop Assembly

Ejector Stops
5C 16C 20C & 25C 3J
Style Part Number Part Number Part No. Part Number
Ejector Stop Asm. 1057-00-00-000000 1155-00-00-000000 N/A 2001-00-00-000000
Model ES-5C ES-16C — ES-3J
"A" Dimension 23⁄4" (69.85) 33⁄8" (85.73) — 33⁄8" (85.73)
— Body 1059-00-00 1059-00-00 — 1059-00-00
— Plunger 1061-00-00 1061-00-00 — 1061-00-00
— Insert 1063-00-00 1063-00-00 — 1063-00-00
— Spring 1065-00-00 1065-00-00 — 1065-00-00
— Adpt bushing — 1155-01-001 — 1995-00-001
— Nuts [2] U-0004141-C U-0004141-C — U-0004141-C
1- Use AF7 wrench (7559) NOTE: Millimeters in parentheses. Collets are not included in assemblies.

13
Universal Collet Stops
5C Universal Collet Stop Set
The Hardinge® Universal Collet Stop Set will convert Hardinge 5C collets
without internal threads into Solid Stop or Spring Ejector Stop Collets.
The two solid inserts and the two inserts for the spring ejector housing
can be machined to suit varying requirements. The front end of the collet
stop body has a standard 1⁄2-20 thread for convenient application of other
sizes and special-shaped stops. The solid inserts of the spring ejector are
adjustable in or out in the stop body to arrive at the desired chucking
depth. The locking screw and brass plug hold the insert or spring ejector
in the predetermined position. Once that is done, merely place the collet
stop in the back of the collet and tighten the lock screw—see illustration.
This causes the locking plugs to securely anchor the collet stop inside the
collet. Application does not require machining of the collet—the stop is
merely placed in the collet.

5C Universal Collet Stop Set

Description Part Number Fig. Model
Universal Stop Set - including: 1019-00-00-000000 G10
— Collet Stop Body 1029-00-00-000000 RX-107-F
— Locking Screw 1031-00-00-000000 RX-107-G
— Nut U-0004141-C
— Lock Pins [6] 1021-00-00-000000 RX-107-A
— Retaining Spring 1025-00-00-000000 RX-107-C
— Plug N37-0000483
— Screw 0550303
— Solid Insert, 9⁄16" Diameter1 1023-00-00-000000 A RX-107-B
— Solid Insert, 1⁄4" Diameter1 1027-00-00-000000 B RX-107-E
— Plunger, 9⁄16" Diameter1 1035-00-00-000000 C RX-107-L
— Plunger, 1⁄4" Diameter1 1037-00-00-000000 D RX-107-N
— Spring for Plunger 1039-00-00-000000 RX-107-R
— Spring Ejector Body 1033-00-00-000000 RX-107-H
— Screw 0100306
1 - Can be altered to different lengths. NOTE: Millimeters in parentheses.

16C Universal Stop – Draw-Tube Style

Description Part Number
Stop Wrench for Collet Body
Universal Stop Assembly - including: 1717-66-00-000000
— Plug 1717-66-01-000000 Description Part Number Part Number
— Body 1717-66-02-000000 5C 16C
— Nut 1717-66-03-000000 Collet Stop Wrench ST-0011759 CC-0011759
— 10 - 32" x 3⁄16" Set Screws [3] 0570303 — Body ST-0004025-02 CC-0004025
— 5⁄32" x 1⁄16" Nylon Plugs [3] N370000483 — Handle ST-0006239 CC-0006239
— Pusher 1717-66-04-000000 — Key ST-0011006 ST-0011006
— Ringspan Disks 1717-66-08-000000 Model Number G-15 16C-15
— 1⁄2" - 13 Jam Nut MD 0003182 20C 25C
— Short Stop Rod 1717-66-05-000000 Collet Stop Wrench CL-0011759-A 7605-00-00
— Long Stop Rod 1717-66-06-000000 — Body CL-0004025-01 7609-00-00
— End Stop 1717-66-07-000000 — Handle CC-0006239 CC-0006239
— O-Ring OR 0002427 — Key CL-0011006 CL-0011006
NOTE: Unit is mounted in the draw tube of the collet closer. Model Number 20C-15 25C-15

Ringspan Disk Jam Nuts

3J
Set Screw & Collet Stop Wrench ST-0011759-01
Nylon Plug
Body — Body ST-0004025
End 1.660"
Stop 42.16mm — Handle CC-0006239
Plug — Key ST-0011006-01
Nut Pusher Stop Rod O-Ring Model Number 3J-15

14
 WORKHOLDING

Dead-Length® Collet Assemblies

5C and 16C
Hardinge® Dead-Length Collet Assembly
Shoulders and faces can be machined to exact length, regardless of OD variations with the
Hardinge Dead-Length Collet Assembly. Parts are loaded against an adjustable solid stop which
is threaded into the inner collet. The inner collet, in turn, is spring-loaded against the spindle face.
There is no end movement.
The low-cost inner collet has a soft face and pilot hole to permit boring to size in the machine spindle for exacting
concentricity. The inner collet is pinned to the outer collet to maintain location and original bored accuracy.
Dead-Length Collets can be used on all machines and attachments with a 5C/16C spindle and draw bar.
The outer collet, solid stop, spring and nut are interchangeable between the Dead-Length Collet and the Dead-Length 2" Step
Chuck on the following page. The complete
assembly is a one time purchase; after that,
buy the inner collet only.

5C Dead-Length Collet Assembly

A B C
Maximum Pilot Hole
Description Part Number Model Chucking Diameter Depth of Stop or Bore Size
Emergency Collet Assembly: 1157-00-00-000000 5DS-71
— Collet Assembly1 only, including: 1157-02-00-000000 5DS-71 Pin
(Use Part # if ordered separately)
— Spring 1165-00-00-000000
— Spring Retainer 1163-00-00-000000
— Nuts [2] U-0004141-C
— Outer Collet 1161-00-10-000000 5DS-71-3
— Threaded Stop 3263-00-00-000000
— Stop Body 3261-00-00-000000
— Emergency Dead-Length Collet 1159-00-10-000000 5DS-71-1 Under 7⁄8" (22.23) 21⁄8" (53.98) 1
⁄8" (3.18)
Other Available Collets
— Emergency Dead-Length Collet 1159-11-00-000000 Under 7⁄8" (22.23) 21⁄8" (53.98) ⁄ " (.79)
1 32

— Hardened and Ground Collet 1159-00-19-000000 5DS-71-1HG Under 7⁄8" (22.23) 21⁄8" (53.98) Order Size
Solid Stop Assembly 3259-00-00-000000 11-9150
1 - Dead-Length collet sold separately.
NOTE: Millimeters in parentheses. Replacement Pins Part #7721.

16C Dead-Length Collet Assembly

A B C
Maximum Pilot Hole
Description Part Number Model Chucking Diameter Depth of Stop or Bore Size
16C Emergency Collet Assembly: 1171-00-00-000000 16DS-80 113⁄32" (35.72) and under 2" (50.80) 18 ⁄ " (3.18)
— Collet Assembly1 only, including: 1171-02-00-000000
(Use Part # if ordered separately)
— Spring 1187-00-00-000000
— Spring Retainer 1189-00-00-000000 Pin
— Nuts [2] 1185-00-00-000000
— Outer Collet 1177-00-00-000000 16DS-80-03
— Threaded Stop 1183-02-00-000000
— Stop Body 1181-01-00-000000
— Emergency Dead-Length Collet 1173-13-00-000000 16DS-80-01

16C Dead-Length Assembly (less inner collet) 1171-02-00-000000

NOTE: Millimeters in parentheses. Replacement Pins Part Number: 7721.

15
Dead-Length® Step Chucks
Hardinge® Dead-Length Step Chucks will accommodate larger chucking diameters.
Shoulders and faces can be machined to exact length, regardless of OD variations with
the Hardinge Dead-Length Step Chucks. The low-cost step chuck has a soft face and
pilot hole to permit boring to size in the machine spindle for exacting concentricity.
The step chuck is pinned to the outer collet to maintain location and original bored
accuracy.
Dead-Length Step Chucks can be used on all machines and attachments with a
5C/16C spindle and draw bar. The outer collet, solid stop, spring and nut are inter-
changeable between the Dead-Length Collet and the Dead-Length 2" Step Chuck.
The complete assembly is a one time purchase; after that, buy the step chuck only.

Dead-Length Emergency Step Chucks

5C 16C 20C A AA B C
Part Part Part Chucking Chucking Maximum Maximum
Description Number Number Number Diameter Diameter Depth of Stop Pilot Hole
Emergency Step Chuck Assembly - including: 1167-00-00-000000 1179-00-00-000000 2041-00-00-000000
Model Number 5DS71SC 16DS80SC 20DS 5C Assembly
— Spring 1165-00-00-000000 1187-00-00-000000 1187-00-00-000000
— Spring (Belleville) [2] 20C Only — — AM901170
— Spring Retainer 1163-00-00-000000 1189-00-00-000000 1815-00-00-000000
— Nuts [2] U-0004141-C 1185-00-00-000000 1885-00-00-000000
— Outer Collet 1161-00-10-000000 1177-00-00-000000 2039-00-0-0000000
— Threaded Stop(Stop Rod) 3263-00-00-000000 1183-02-00-000000 1271-00-00-000000
— Stop Body 3261-00-00-000000 1181-01-00-000000 1813-00-00-000000
— 5C Emergency Dead-Length Step Chuck 1169-00-10-000000 — — 2" (50.80) 7
⁄8" (22.23) 25⁄8" (66.67) 1
⁄4" (6.35)
— 16C Emergency Dead-Length Step Chuck — 1175-00-00-000000 — 23⁄4" (69.85) 113⁄32" (35.72) 25⁄8" (66.67) 1
⁄4" (6.35)
— 20C Emergency Dead-Length Step Chuck — — 2037-00-00-000000 31⁄2" (88.90) 13⁄4" (44.45) 31⁄2" (88.9) 1⁄4" (6.35)

Emergency Step Chuck Assembly 1157-02-00-000000 1171-02-00-000000 2041-02-00-000000

Inner Collet sold separately
NOTE: Millimeters in parentheses. Emergency Collets not intended to be heat treated. Hardened and Ground collets are available upon application.
To set spring tension, compress coil spring completely by hand, then back off nut one turn.

16C Assembly 20C Assembly

Wrenches, Spanners & Pins for Dead-Length Collet Assemblies Collet Stop Wrench
for Outer Collet
Part Name 5C Part Number 16C Part Number 20C Part Number
Collet Stop Wrench ST-0011759 CC-0011759 CL-0011759-A
rench
Inner Collet Spanner Wrench 7893-00-00-0000001 7895-00-00-0000002 7897-00-00-0000003 e ® Spa
nner W
Harding
Adjustable Face Spanner — 7891-00-00-0000001 — Inner Collet Spanner
Pins (3) for DL Collet – 5C, 16C 7721-00-00-000000 7721-00-00-000000 7721-00-00-000000
Pins (3) for Step Chuck – 5C, 16C, 20C 7723-00-00-000000 7723-00-00-000000 7723-00-00-000000
1 – 3/16" pin. Adjustable Face
2 – 7/32" pin. Spanner for
3 – 1/4" pin Spring Retainer
16
 WORKHOLDING

Dead-Length® Thru-Hole Collets

5C and 16C

Dead-Length Thru-Hole Collets

Thru-hole collets are ideal for bar work and long workpieces.
Bar stock up to 3⁄4" in diameter can pass "through" the 5C collet,
while maintaining part length control. The 16C Collet allows for
bar stock up to 13⁄16". With the Dead-Length Collet feature, the
bar stock will not draw back from the stock stop.

In use, the outer collet threads directly into the collet closer draw bar. The bar stock is
then fed through the collet and located against the turret-mounted stock stop. As the
closer is actuated, the draw bar pulls the outer collet into the machine spindle, allowing
the inner collet to contract and accurately grip the stock. Because the inner collet is
spring-loaded against the spindle face, no end movement is possible.

Precision machined or emergency collets can be used as the inner collet. The 5C
precision machined collets are available in sizes 1⁄32" to 3⁄4", inclusive by 1⁄32" increments.
Over-capacity sizes, available for chucking work are: 25⁄32", 13⁄16", 27⁄32", and 7⁄8" (cannot
be used for bar work). The low-cost emergency inner collet has a soft face with pins
for machining and a 1⁄8" pilot hole to permit boring to size in the machine spindle for
exacting concentricity. The inner collet is keyed to the outer collet to maintain location
and original bored accuracy. The pins used for machining can be saved for stepping out
the collet on future jobs.

Buy the complete assembly one time, and then just buy the inner collets when needed.
Use in any machine or fixture with a 5C/16C spindle and collet draw bar.

Dead-Length Thru-Hole Collet (Not Available for 20C or 25C)

5C 16C Dimension Collet Capacity
Part Part A
Description Number Number Pilot Hole Round Hexagon Square
Emergency Collet Assembly - including: 1157-01-00-000000 1171-01-00-000000
Model Number 5DS-71-TR 16C-80-DTCL
— Collet Assembly1 including 1157-01-01-000000 —
— Spring 1133-00-00-000000 16A-00081015C
— Spring Retainer 1131-00-00-000000 1171-01-02-000000
— Nuts [2] 1157-06-00-000000 1171-01-03-000000
— Outer Collet 1161-00-00-000000 1177-00-00-000000
— Guide Body 1129-00-00-000000 1171-01-01-000000
5C Emergency Dead-Length Collet 1159-00-10-000000 — 1
⁄8" (3.18) 3
⁄4" (19.05) 41
⁄64" (16.27) 17
⁄32" (13.50)
5C Hardened & Ground DL Collet2 1159-00-19-000000 — — ⁄ " (19.05)
34 ⁄ " (16.27)
41 64 ⁄ " (13.50)
17 32

16C Emergency Dead-Length Collet — 1173-13-00-000000 1⁄8" (3.18) 13⁄16" (30.16) 11⁄64" (25.80) 53⁄64" (21.03)

16C Hardened & Ground DL Collet — 1173-00-19-000000 — 13⁄16" (30.16) 11⁄64" (25.80) 53⁄64" (21.03)

1 – Dead-Length collet sold separately. NOTE: Millimeters in parentheses.

2 – Available in 1⁄32" increments. Part numbers preceded by 9 are special order.

17
Dead-Length® Collet Ejector Stops

• Ideal for second operation work

• Kicks part out into part chute when collet is opened
5C Ejector
• Ejects part into step collet and holds it against
shoulder while collet is closing
• Ejects part into a feed finger style parts
transfer device
• One time purchase of complete assembly; after that,
buy only the "Stop for Plunger" 16C Ejector

5C and 16C Dead-Length Collet Ejector Stop Assembly

Description 5C D.L. Ejector Stop 16C D.L. Ejector Stop
Part Number Part Number
Ejector Assembly Only - No Collets ** 2165-00-00-000000 2175-00-00-000000
Ejector Stop Assembly - Complete 2161-00-00-000000 2171-00-00-000000
Ejector Assembly & Outer Collet * 2163-00-00-000000 2173-00-00-000000
Ejector Assembly Step Chuck - Complete 2157-00-00-000000 2159-00-00-000000

Parts List - Components Key

Nut/nuts1 1 2169-00-00-000000 2179-00-00-000000
Belville Springs [2] 2 N/A CE-1750057
Large Spring 3 CE-0975105-1250 CE-1100105-0875
Spring Retainer 4 1131-00-00-000000 2181-00-00-000000
Outer Collet 5 1161-00-10-000000 1177-00-00-000000
Small Nut 6 U-0004141-C U-0004141-C
Small Spring 7 1065-00-00-000000 1065-00-00-000000
Heavy Small Spring 7 — CE-0000054
Plunger 8 1061-00-00-000000 1061-00-00-000000
Ejector Body 9 2167-00-00-000000 2177-00-00-000000
Emergency Dead-Length Collet 10 1159-00-10-000000 1173-00-00-000000
Hardened & Ground Dead-Length Collet 10 1159-00-19-00Size OA
Dead-Length Step Chuck 10 1169-00-10-000000 1175-00-00-000000
Stop for Plunger 11 1063-00-00-000000 2183-00-00-000000
N/A - Not Applicable; OA - On Application ** Includes Parts: 1, 2, 3, 4, 6, 7, 8, 9 and 11
* Includes Parts: 1, 2, 3, 4, 5, 6, 7, 8, 9 and 11

5C Assembly

1 2 3 4 5 6 7 8 9 10 11

16C Assembly

18
 WORKHOLDING

Dead-Length® Spider-Stop 16C Step Chuck

The Dead-Length Spider-Stop Step Chuck is designed to handle workpieces larger than the capacity of the Dead-Length
16C Collet or Step Chuck. There is a spider stop which slides through oversize slots in the step chuck and locates against the
collet seat in the machine’s 16C spindle. A stop button screws into the spider stop and can be machined to locate against the
reference location on the workpiece. This system requires a standard extra-depth step chuck closer.
The Spider-Stop Step Chuck has only one moving part — the step chuck. This allows for
much better concentricity than the standard Dead-Length Collet System, even for smaller
diameter workpieces. The Step Chuck is first machined to the chucking diameter of the
workpiece and to a depth to accommodate the stop button. The stop button is machined
to the locating surface of the workpiece. The stop button is assembled. The unit is
mounted into the spindle of the machine that already has the appropriate step chuck closer
mounted. With the collet closer in the open position and the workpiece held against the
stop button, the draw tube is turned until the step chuck just grips the workpiece and then
backed off 1⁄2 a turn. The part should easily load into the step chuck. The collet closer is
locked in this position. With the part firmly located against the stop button, the step chuck
is closed. It is important that the stop button be lightly faced after the unit is mounted in
the spindle to ensure extremely precise perpendicularity with the locating surface.

16C Dead-Length Spider-Stop Step Chuck

Dimension A Dimension B Dimension C
Maximum Maximum Maximum
Description Part Number Figure Bore Depth Chucking Dia. Chucking Depth
3" ED Emergency D.L. Step Chuck Assembly 1331-00-00-000000 1 1.250" (31.75) 3.00" (76.20) 1.000" (25.40)
– 3" ED Emergency D.L. Step Chuck 1327-00-00-000000 1
– 3" Stop Button 1137-00-00-000000 1
– Spider-Stop Assembly, Including 1239-00-00-000000 1
- Spider Stop Fins* 1325-00-00-000000 1
- Draw Rod 1349-00-00-000000 1
- Adapter Bushing 1155-01-00-000000 1
- Spring Retainer 1163-00-00-000000 1
- Spring 1165-00-00-000000 1
- Nut [2] U 0004141 1
3" 16C ED H&G Step Chuck Closer 16-0002683-OC 2
4" ED Emergency D.L. Step Chuck Assembly 1367-00-00-000000 1 1.250" (31.75) 4.00" (101.60) 1.000" (25.40)
– 4" ED Emergency D.L. Step Chuck 1329-00-00-000000 1
– 4" Stop Button 1319-00-00-000000 1
— Spider-Stop Assembly (Parts Shown Above) 1239-00-00-000000 1
4" 16C ED H&G Step Chuck Closer 16-0002684-OC 2
Initial Order Requires:
* 1⁄2"-20 TPI (Internal Thread) x 5⁄8" (15.9mm) deep can be used for customer made extensions. One 3" or 4" Emergency Dead-Length Step
NOTE: Millimeters in parentheses. Chuck Assembly, and one 3" or 4" Extra Depth
Hardened & Ground Step Chuck Closer

A
C
Spring Spider Stop Fins Machine Spindle
Retainer
Draw Rod

1 B 2

Nut
Spring
Adapter Stop
3" or 4" 16C Extra-Depth Closer
Extra-Depth Emergency Step Chuck

CROSS SECTION
OF ITEMS MOUNTED

19
Master Collets & Pads

The Style "S" Master Collet, although originally designed for first
operation machining on multi-spindle automatic screw machines, has
many benefits to the CNC lathe operator. The collet pads can be
changed much quicker than a standard solid collet, the cost is less
and it requires much less storage space. Depending on size, the TIR
for the master collet and pads is .004" to .008".
S12 Collet & Pads
The Style "S" Master Collet System with hardened and ground
collet pads should not be used for secondary work because of the
system’s large TIR. Some customers are successful using emergency
pads which they bore to size on the machine tool. Choose from soft
S16, S20, S26 emergency or semi-hard emergency pads for longer wear. When
Collet & Closer the pads are removed from the master collet and then replaced,
they may again runout excessively. Emergency collets are used again
when rebored to sizes larger than the original bore.
Style "S" Master Collets and Pads
Dimensions
Master Extra-Depth Pad A B C D Rated Capacity
Part Closer Part Part Back Bearing Overall Collet Face
Style Number Fig. Number Number Diameter Length Diameter Thread Round Hexagon Square
S10 (B42) 5205-00- 2 — 5601 1.887" (47.93) 3.688" (93.68) 2.355" (59.82) M43 x 1 1" (25.40) ⁄ " (21.83)
55 64 ⁄ " (17.86)
45 64

S12 (16C) 1717-01- 1 — 5603 1.889" (47.98) 4.625" (117.48) 2.265" (57.53) 1.870" x 1.75 mm RH 11⁄4" (31.75) 15⁄64" (27.38) ⁄ " (22.23)
78

S16 (16C) 1717-02- 3 16-0002683-OC 5607 1.889" (47.98) 6.453" (163.91) 3.875" (98.43) 1.870" x 1.75 mm RH 1 ⁄ " (41.28) 1 ⁄ " (35.72) 1 ⁄ " (28.97)
58 13 32 9 64

S20 (20C) 1249-00- 3 20-0002683-OC 5609 2.378" (60.33) 8.388" (213.06) 3.750" (95.25) 2.359" / M60 x 1.5mm RH 2" (50.80) 123⁄32" (43.66) 113⁄32" (35.72)
S26 (20C) 3605N as a special 5613 2.378" (60.33) 8.813" (223.85) 4.750" (120.65) 2.359" / M60 x 1.5mm RH 25⁄8" (66.68) 217⁄64" (57.55) 127⁄32" (46.83)
S22 (B65)1 5311-00- 2 — 5611 2.832" (71.93) 4.328" (109.93) 3.603" (91.51) M66 x 1 21⁄4" (57.15) 115⁄16" (49.21) 137⁄64" (40.08)
S26 (25C) 1291-00- 4 1443-00-00-000000 5613 2.930" (74.42) 9.020" (229.11) 4.926" (125.38) 2.871" / M73 x 1.5mm RH 25⁄8" (66.68) 217⁄64" (57.55) 127⁄32" (46.83)
NOTE: Millimeters in parentheses. 1 Uses Clamp Assembly 7627 (3 ea).

1 2 3 4

Internal stop thread is 1.687" x 20 RH. Internal stop thread is 1.687" x 20 RH. S26 Collet & Pads
An extra depth closer is required

Style "S" Pads – Standard, Soft Emergency, Semi-hard Emergency

Round Smooth Round Serrated Round Metric Hexagon Square Emergency Semi-Hard Emerg.
Description Part Number Part Number Part Number Part Number Part Number Part Number Part Number
S10 Pads 5601-00-19- 5601-00-59- 5601-00-57- 5601-00-29- 5601-00-39- 5601-14-10- —
S12 Pads 5603-00-19- 5603-00-59- 5603-00-57- 5603-00-29- 5603-00-39- 5603-14-10- 5603-13-10
S16 Pads 5607-00-19- 5607-00-59- 5607-00-57- 5607-00-29- 5607-00-39- 5607-14-10- 5607-13-10
S20 Pads 5609-00-19- 5609-00-59- 5609-00-57- 5609-00-29- 5609-00-39- 5609-14-10- 5609-13-10
S22 Pads 5611-00-19- 5611-00-59- 5611-00-57- 5611-00-29- 5611-00-39- 5611-14-10- 5611-13-10
S26 Pads 5613-00-19- 5613-00-59- 5613-00-57- 5613-00-29- 5613-00-39- 5613-14-10- 5613-13-10
NOTE: Other configuration pads also available.
Wrenches, Seals & Clamps

Description Part Number

Bristol Wrench Handle 7909-00-00-000010
— Wrench .111" 7909-00-00-000001
— Wrench .145" 7909-00-00-000002
Seal
Bristol "L" Wrench 7637-00-00-000000
Clamp Bristol Wrench Handle 7909-00-00-000013
Seal (Sold by the dozen) 7643-00-00-010000
S10, S12, S16, S20 & S26 Collet & Pads
Clamp Asm. 3 ea. (S26 4 ea.) 7619-00-00-000000
Clamp Assm for S22 (3 ea.) 7627-00-00-000000
20
 WORKHOLDING

Master Expanding Collets

5C and 16C

The Hardinge® Super-Precision® Master Expanding Collet is a valuable aid for close The master collet is hardened and
tolerance machining. There is no end movement of the master expanding collet or ground. The pads are soft for turning
pads. The collet threads are separate from the collet body and pull back to operate in the machine spindle for exacting
the expander. The shoulder on the machineable pads locates the work for Dead- concentricity. Depending on job
Length® control for facing repetitive parts to the same length. No spindle nose cap application, pads may be machined for
is required. internal gripping from 1⁄4" to 3" ID. The
limit ring is used to stabilize the pads
while turning to the desired diameter.
Master Expanding Collet Assembly – 5C and 16C Pad segments and master collet are
5C 16C stamped "A", "B" and "C" for replace-
Description Part Number Part Number ment positioning. The pads may be
Master Expanding Collet Assembly1 – including: 1139-00-00-000000 1191-00-00-000000 re-machined for smaller diameters. Can
— Expanding Collet Body 1141-00-00-000000 1193-00-00-000000 be used on all machines or attachments
— Draw Thread 1143-00-00-000000 1195-00-00-000000 with a 5C or 16C spindle and operates
— Draw Plug 1145-00-00-000000 1197-00-00-000000 with the standard draw spindle (bar).
— Spring 1151-00-00-000000 1151-00-00-000000 The collet body assembly and the limit
— Screw 0100306 0100306
rings are a one-time purchase.
— Nut U-0004141-C U-0004141-C
After that, you only have to order the
Model Number 5EC-70 16EC-80
low-cost pads.
1 - Requires master pad set and appropriate limit ring; each sold separately.

Master Expanding Collet Pad Sets – 1⁄4" to 3" (6.35 to 76.20mm) Capacity
Part A B
Description Number Model Pad Capacity Gripping Diameter Maximum Turned Length
2" Steel Master Pad Set2 1147-00-00-000000 5EC-70-4 2" (50.80) Over 11⁄2" to 2" (38.10 to 50.80) [A1] 11⁄16" (26.99) [B1]
2" (50.80) Over 3⁄8" to 11⁄2" (9.53 to 38.10) [A2] 3⁄4" (19.05) [B2]

2" (50.80) 1⁄4" to 3⁄8" (6.35 to 9.53) [A3] Equal to Dia. Turned [B3]
Limit Ring for 2" Pads 1149-00-00-000000
3" Aluminum 1153-00-00-000000 5EC-70-7 3" (76.20) Over 2" to 3" (50.80 to 76.20) [A1] 15⁄8" (41.27) [B1]
Master Pad Set2 3" (76.20) Over 11⁄2" to 2" (38.10 to 50.80) [A2] 11⁄16" (26.99) [B2]
3" (76.20) 3⁄4" to 11⁄2" (19.05 to 38.10) [A3] 3⁄4" (19.05) [B3]

Limit Ring for 3" Pads 1111-22-00-000000

2 - Requires limit ring.
NOTE: Millimeters in parentheses.

21
Precision Expanding Collets

Model "S" Precision Expanding Collets

Precision internal chucking simplifies your tooling and machining operations. Precision
results are assured when many operations are done in one chucking. The Model "S"
expanding collet assembly is precision engineered for small inside diameter chucking.

Concentricity requirements, like all machining specifications, are very rigid. With the
Hardinge expanding collet unit, it is easy to obtain concentric and square shoulders,
The Model "S" Expanding collet draw faces and diameters with a previously machined bore. The Hardinge expanding collet
plug expands at the front of the collet, adjusts to meet your most exacting requirements by means of four concentricity
resulting in maximum gripping force in adjusting screws. Exact lengths are easily obtained since both the stationary expanding
the bore of a small diameter workpiece. collet and work locating stop have no end movement. The work locating stop is
Hardinge recommends using the Sure- machined in place during machine set up, assuring an absolutely square locating surface.
Grip® Expanding Collet System When the collet is in the released position, it is smaller in diameter than the bore of
for larger diameter workpieces. the part. The result is fast and easy loading and unloading.

5C and 16C Model "S" Expanding Collet Assembly – 3⁄8" to 3⁄4" (9.52 to 19.05mm) by 1⁄64" Increments ­
A B D
Part Back Bearing
Description Number Fig. Model Outside Dia. Overall Length Thread
5C Model "S" Assembly1
Taper 1077-26-00-000000 1a
Threaded 1077-00-00-000000 1a
including:
— Draw Collet 1079-00-00-000000 2 E-206 1.249" (31.72) 3.250" (82.55) 1.238" x 20 RH
— Draw Plug 1081-00-00-000000 3 ES-207 .254" (6.45) 2.750" (69.85) .245" x 28 RH
— Spindle Collar 1a
Taper-Nose 1083-00-00-000000 E-211
Spanner for Spindle
Threaded-Nose 1085-00-00-000000 E-211-D
Collars
A2-4 and A2-5 Special Order ch
ren
— Adjusting Screw 0570510 panne
rW
e® S
— Cap Screw 0100308 Har
din
g

16C Model "S" Assembly1 1205-02-00-000000 1b Part No. 460-0009189

including: 5/16" pin

— Draw Collet 1209-02-00-000000 2 1.889" (47.98) 4.312" (109.53) 1.870" x 1.75 mm RH

— Draw Plug 1081-16-00-000000 3 .220" (5.59) 2.969" (75.41) 7 mm x .75 RH
— Spindle Collar 16-0000211-A201 1b
— Adjusting Screws [4] 0550710 1b
— Cap Screws [3] 0100308 1b
— Mounting Bolts [4] 0101216 1b
Model "S" Expanding Collet2 1089-00-00-000000 4 MP3461 2.255" (57.28) 1.750" (44.45)
Work-Locating Stop 3 1087-00-00-000000 5 ES-209 2.312" (58.72) 1.218" (30.94)
1 - Requires Model "S" Expanding collet sold separately. NOTE: Millimeters in parentheses.
2 - Required with assembly. Available in Round sizes 3⁄8" to 3⁄4" by 1⁄64" increments.
3 - Optional. Recommended for Positive Part Location.
2

1a 1b 3
5C 16C

4 5

22
 WORKHOLDING

Emergency Expanding Collets

Model "S"

Model "S" Emergency Expanding Collets

A B C D E
Part Neck Gripping Gripping Face to Collet
Description Number Model Turned Range Diameter Length Length Shoulder Depth Length
.562" to .750" .547" .766" .906" 1.281" 1.656"
Model "S" Expanding Collet1 1093-00-00 S-E (14.27 to 19.05) (13.89) (19.46) (23.01) (32.54) (42.06)
Limit Ring for “S" Collet 1093-22-00 MP3461C
1 - Requires limit ring.
Note: Millimeters in parentheses.

Sure-Grip® Expanding Collets

The Hardinge Sure-Grip® Expanding Collet System
is ideal for internal gripping of larger diameter bores.
The Sure-Grip system has a larger gripping range
and considerably more gripping force due to its true
parallel closing. Refer to models 200, 250, 300, 400,
500 and 600 in brochure #2270.

Advantages of the Sure-Grip Expanding

Collet System…
• Instant centering of the arbor—no adjustment needed after mounting
• Quick changeover
• Wide gripping range for each collet
• True parallel gripping even when gripping on half the collet body
• High gripping force
• Light gripping on small parts with bores down to 1⁄8" (3.175mm)
• Built-in safety stop to prevent the collet from overexpanding
• Exact part length control
• Consistency in collet capacity for different spindle styles (interchangeable collets)
• Delivery in 3 to 5 days

23
Collet & Step Chuck Adapters
Collet adapters let you use smaller collets in machines with larger collet seats. Units
are available to adapt 5C collets to 16C spindles, 16C collets to 20C and 25C spindles
and 16C step chucks to 20C spindles. These units are valuable when you do not
have the proper size standard collet for the machine but do have the proper size in
a smaller style collet. Do not consider this unit when doing precision work. Because
of the number of parts in the assembly, the TIR of the machined diameters to the
chucked diameters may be unacceptable. This system should not be considered when
doing many collet changes a day. It may take from 15 to 30 minutes to change a collet.
It is more cost effective to purchase the proper style collet for the machine tool.
Quad Ring & Perma-
bond Adapter
Draw Tube Cap
Adapter Reducer
Bushing

16C 20C & 25C

16C Key

Mounting Bolts
Spindle Collet Adapters
A2-5 Spindle A2-6 Spindle A2-6 QUEST® A2-8 Spindle
16C to 5C 20C to 16C 25C to 16C 25C to 16C
Description Part Number Part Number Part Number Part Number
Adapter Assembly - including: 16B-0000185-5C 7535-00-00 2993-00-00 7457-00-00
— Draw Tube Adapter 16A-0000301-5C 7541-00-00 7463-00-00 7463-00-00
— Reducer Bushing 16A-0000186-5C 7537-00-00 7461-00-00 7461-00-00
— Bolts [3] (20C & 25C 4ea.) CC-0007373 MS-0104219 MS-0104219 MS-0104620
— Adapter Cap 16B-0010768 7543-00-00 7543-00-00 7459-00-00
— Quad Ring 40-0011151-32 41-0011151-45 41-0011151-45 41-0011151-45
— Key — 7539-00-00 7465-00-00 7465-00-00
— Key Screw 16-0000338-5C — — —
— Set Screw N-0590304-L — — —­
— Permabond 910 QC-0010884 QC-0010884 QC-0010884 QC-0010884
NOTE: For use with collets, positive stops, master expanding collet and pads, collet fixture plates, stub/mill arbors, and spindle centers and drivers.

Spindle Step Chuck Adapters

Style Description Part Number Adapter

16C N/A
20C 20C to 16C Step Chuck Adapter - including: 7911-00-00-000000
— Draw Tube Adapter 7913-00-00-000000
— Key 7915-00-00-000000 Key
25C N/A
NOTE: Uses the lathe’s standard closer with the adapted step chuck.

Collet Face Spanner Wrenches

Wrench Replacement
Collet Part Number Finger Set Part Number
3J & 16C 7901-00-00-00003J 7901-00-00-00FNGR
5C 7899-00-00-000000 7899-00-00-00FNGR
20C 7901-00-00-00020C 7901-00-00-00FNGR
25C 7901-00-00-00025C 7901-00-00-00FNGR
S15 7901-00-00-000S15 7901-00-00-0015FN
S20 7901-00-00-000S20 7901-00-00-00SFNG
S26 7901-00-00-000S26 7901-00-00-00SFNG
S30 7901-00-00-000S30 7001-00-00-00SFNG
24
 WORKHOLDING

Fixture & Backing Plates

5C and 16C

Fixture plates are used to mount parts which cannot be held in a collet, step
chuck, expanding collet or jaw chuck. The clamping method is custom designed
and manufactured by the customer to meet the machining requirements. Fixture
plates normally have to be balanced to be safely run because the parts are not
uniform or clamped in an off-center position. Collet and spindle-mount styles are 3 Sizes of
5C Fixture Plates
available for both 5C and 16C spindles.

Spindle-Mounted and Collet-Style Fixture Plates

Part Number Model A B
Description Taper Threaded Taper Threaded Diameter Flange
5C Fixture Plate 53A-0008750 53A-0008750-D C-23 C-23D 3" (76.20) —
5C Fixture Plate 55A-0008750 55A-0008750-D C-24 C-24D 5" (127.00) 34⁄ " (19.05)
A2-5 Fixture Plate
5C Fixture Plate 59A-0008750 59A-0008750-D C-25 C-25D 87⁄8" (225.43) 3
⁄4" (19.05)
16C Fixture Plate A2-0008750-05 C-24A 51⁄2" (139.70) —
A2-5 Fixture Plate A2-0008750-08 C-25A 87⁄8" (225.43) .750" (19.05)
5C Collet-Style 1397-00-00-000000 5C-3F 33⁄8" (85.73) 1" (25.40)
5C Collet-Style 1399-00-00-000000 5C-4F 43⁄8" (111.13) 1" (25.40)
16C Collet-Style 1785-00-00-000000 — 6.370" (161.79) 1"( 25.40)
NOTE: Millimeters in parentheses.

Collet Style
Fixture Plates

Dead-Length Work Stops (Backing Plates) are used to hold extremely close
lengths on parts that have a stem and a locating shoulder. The stem is gripped by
the collet and the shoulder located against the stop plate. As the collet closes, it
pulls the workpiece back against the backing plate. The workpiece length can be
accurately controlled even when the gripping diameter of the part varies.
The part is much more stable than one held in a collet against its face or a
counterbore. This allows longer parts to be machined with better tool life.
When running small quantities, the spindle mount does not have to be
used. This system is the least costly of all precision length control systems.
5C Spindle Mount & Stop Plates
5C Dead-Length Work Stops
Part Number Model
Description Taper Threaded Taper Threaded
Spindle Mount ST-0011203 ST-0011203-D WS WSD
Stop Plates [Set of 3] ST-0011223 WSS

Machine Spindle

16C Dead-Length Work Stop Assembly Spindle Mount

Set Screw
16C Collet
Description Part Number Workpiece
Spindle Mount Assembly - including: 1311-00-00-000000
Work Stop Spindle Mount 1313-00-00-000000
— Flat Face Set Screw [4] 0570306 Work Stop
— Mounting Bolt [4] 0101216 Plate

Work Stop Plates (Set of 3) 1315-00-00-000000

Mounting Bolt

25
5C Face & Angle Plates
Stub/Mill Arbors and Drivers

Spanner for Face, Fixture

& Driver Plates and Work
Stops
ch
ren
rW
nne
Spa
nge
®

di
Har

1 Part No. 460-0009189

5/16" Pin

5C Face Plates
Part Number Model A
Description Taper Threaded Figure Taper Threaded Diameter
Face Plate1-5C 57A-0000692 57A-0000692-D 1 C-26 C-26D 7.000" (177.80)
Face Plate1-5C 59A-0000692 59A-0000692-D 1 C-27 C-27D 8.875" (225.42)
1 – Drilled and tapped for 5⁄16" x 18 TPI bolts. NOTE: Millimeters in parentheses.

5C Stub/Mill Arbors A

5C Stub Arbors are available in / " and / " shaft

5 8 1 2

diameter. The stub arbors can be used on any mill Part “A" Shaft
with a 5C spindle. They are made for simple milling Description Number Model Diameter
operations on Hardinge-style mills. Stub/Mill Arbor 54-0002602 M-4 ⁄ " (15.88)
58

Stub/Mill Arbor 53-0002602 M-5 ⁄ " (12.70)

12

NOTE: Millimeters in parentheses.

5C Center with Driver

The hardened and ground
center with the driver is required Description Part Number Model
for between-center work on Center With Driver U-0009186 M-1
any machine or attachment with
a 5C Spindle.

5C Driving Dog and Driver

The drive plate mounts on the Hardinge 5C spindle
nose and is used in conjunction with the driving dog
to drive work between centers. When ordering,
specify for taper- or
threaded-nose Description Part Number Model
spindle. Drive Plate:
Taper 57-0000298 G-12
Threaded 57-0000298-D G-12D
Driving Dog 37-0002617 G-1

26
 WORKHOLDING

5C Collet Racks

Protect your 5C collet investment with Hardinge® Collet Racks.

Store your collets in a manner that will protect the head angle, threads
and keyway. The collet racks give quick access and easy collet selection
and are designed to bolt to your work table for maximum stability.
Available in a 35 capacity rack and a two step 28 capacity rack. The
two step model holds fully assembled Dead-Length® collets, collets with
stops, master expansion collets, standard and extra-depth step chucks.

5C Collet Racks
Description Capacity Part Number
5C Collet Rack 35 0944-00-00-000032
5C Collet Rack - Stepped 28 0944-00-00-000028

Custom manufacturing
of Special Collets and
Step Chucks
Hardinge will manufacture special 5C,
16C, 20C and 25C collets and step
chucks to hold your extruded stock,
non-round parts, eccentric, off-center and
stepped parts. Special accuracy collets and
step chucks, extremely deep and/or large
diameter step chucks and closers are
some of the frequently made items in our
special collet department. If you have a To request a quote or to order a
special workholding application, Hardinge special workholding device, please call
can manufacture a workholding device to 800-843-8801, or fax your drawing to
accurately grip it. 607-737-0090. Specifications for the
most common special collets are shown
Specials are manufactured to rigid on the following two pages. These
specifications, including material, proper pages can be photocopied, filled out
heat treat and machined accuracy. The and faxed or mailed to the Hardinge
experts in our engineering department Sales Department. When sample parts
can offer you technical assistance in are being sent to Hardinge, please call
designing your collet, step chuck or for a Returned Material Authorization
related workholding device for your number to help speed up the process.
special machining needs. Hardinge can The drawings and sample parts should
manufacture many of your unusual be addressed to: Hardinge Inc., Collet
or unique workholding items to your Sales Department, One Hardinge
specifications. For generations, Hardinge Drive, Elmira, NY, 14902-1507.
specials have been the choice of
experienced machinists, manufacturing
engineers and productivity-oriented
manufacturers.

27
Custom Quote Request – 1 of 3

To place your order or request a quote, simply fill out this form and send the requested information below. We want
to make it easy as possible for you to get your quotation back, so checking the box in front of each item will help to
ensure everything is complete before sending the information to us. The following two pages will assist you
in choosing your collet configuration.

❑ Your Name_ _______________________________________________________

❑ Company__________________________________________________________
❑ Address___________________________________________________________
❑ City, State & Zip____________________________________________________
❑ Phone_____________________________________________________________
❑ Fax_______________________________________________________________
❑ Machine Make and Model Number on which workholding will be used:
(Example: Hardinge Quest 8/51)
❑ Collet Required:
(Example: 20C)
❑ Spindle Nose:
(Example: A2-6)
❑ Sample Stock (6" long - extruded stock), casting, first operation part,
finished part
❑ Legible Prints of the stock, finished part. These must be marked to show the diameters
or surfaces to be gripped. Mark the locating surface used for length control. Please mark
the surfaces to be machined.
❑ AutoCad Files or dxf files of the above, if available.
❑ Written Explanation of any special requirements:
For example special concentricity or perpendicularity requirements, concerns with chip
flushing, requirements for thru-spindle coolant, customer concerns with part being
deformed by gripping, large variation of gripping surface or locating dimensions, etc.

Explanation:

— This page may be duplicated —

28
 WORKHOLDING
Type of Collet or Special:

Custom Quote Request – 2 of 3 (example: 5C, 16C, #3J, etc.)

Numbers below correspond to dimensions in boxes

• Fill in the Type of Collet or Special (example 5C, 20C, 3J)
• Find the illustration of the feature needed in one of the boxes 1 Order Hole Size:____________________
• Put a Bold “X" in the box to indicate that feature
2 Order Hole, 2nd:____________________
• Write the required dimensions next to their numbers in the chart to the right
Note: Only fill in the dimensions for the numbers on one illustration 3 Number of Slots:____________________
4 Radius:_ __________________________
Today’s Date_________________________________ 5 Bearing Length:____________________
Date Order Required___________________________
6 Bearing Length Front:________________
Customer Number_____________________________
7 Back Drill Dia.:_____________________
Purchase Order Number________________________
Method of Shipping____________________________ 8 Relief Dia.:________________________
9 Relief Length:______________________

Bill To: 10 Depth of Step, 1st:_ _________________

Name _ _____________________________________ 11 Depth of Step, 2nd.:_________________
Title/Dept. ___________________________________ 12 Auxiliary Hole Size:_ ________________
Company _ __________________________________ 13 Length of Extension:_________________
Address _ ___________________________________
14 Dia. at Face:_______________________
City, State, Zip _ ______________________________
15 Degrees Taper/Chamfer:______________
Phone ________________ Fax __________________
16 Front Dimension of Taper:_ ___________
Ship To: (If different from Bill To)
17 Rear Dimension of Taper:_____________
Name _ _____________________________________
Title/Dept. ___________________________________ 18 Taper-Industrial Std:_________________
Company _ __________________________________ 19 Off Center Distance:_________________
Address _ ___________________________________ 20 Order Hole - Width:__________________
City, State, Zip _ ______________________________ 21 Order Hole - Length:_________________
Phone ________________ Fax __________________
22 Thread Length:_____________________
23 Threads Per Inch:___________________
Hexagon Hexagon Square Square 24 Right/Left Hand Thrd.:_ ______________
Eccentric to Corner Eccentric to Flats Eccentric to Flats Eccentric to Corner
25 Class Thread (1), (2), (3):_ ___________
26 Chamfer Depth:_____________________
27 Inscribed Circle:____________________
28 Circumscribed Circle:________________
29 Clearance Bore: ____________________
30 Actuator Stroke:_ ___________________
Rectangular Rectangular Octagon Octagon
Eccentric - Short Side Eccentric - Long Side Eccentric to Flat Eccentric to Corner
Send Drawings, Sample Parts
and this form to:

Hardinge Inc.
Collet Sales Dept.
One Hardinge Drive
Round
Elmira, New York 14902-1507
Eccentric Triangular Special Extruded Shape
Phone: 800-843-8801
Drawing & Sample Stock Required
• An extrusion drawing must indicate the Fax: 607-737-0090
centerline of the shape in relationship to
the centerline of the collet.
Email: [email protected]
• Sample stock required.* If not available, Canada: 800-468-5946
manufacturing authorization is required
prior to entry of order. If approved, Return Material Authorization (RMA#) required
item(s) will be manufactured with for Hardinge to receive your Sample Part
customer assuming full responsibility.
• The confirming order.

*One 6" length of stock required when ordering 1 to 3 collets; two 6"
lengths for 4 to 7 collets; three 6" lengths for 8 to 11 collets; four 6"
lengths for 12 to 15 collets ordered.
— This page may be duplicated —
29
Custom Quote Request – 3 of 3
Checkmark the box with the feature you require and record the dimensions on the corresponding lines 1-30 on the previous page.

Over-the Shoulder Flat Face Bearing Relief

Chamfer - Depth Chamfer - Diameter Radius

Special Bearing Length Eccentric Step - Aux. Off Center Eccentric Step - Aux. On Center

Single-Stepped Double-Stepped Threaded Order Hole

Extended Nose - Straight Extended Nose - Tapered Angular Slotted

Taper - Regular Taper - Reverse Zig-Zag Slots

— This page may be duplicated — 30

 WORKHOLDING

Stationary Collet Systems

B65 Assembly

B65 Collet Chuck

The B65 collet chuck is a Dead-Length® system designed to provide very precise
length control of the workpiece. This exact part-length feature makes it possible
to accurately transfer parts from one spindle to the other within .0005" (.0127
mm). The system uses either B65 Solid or B65 Style S22 Master Collets and pads.

The B65 Stationary Collet is used on the Hardinge QUEST® TwinTurn® 65 CNC
Turning Center and other machines that use B65 Stationary Collet Systems.

Stationary collet systems are noted for their length control

feature. The collet does not move when it is closed. It
is inserted into the collet chuck or spindle adapter and
held in place with a cap. The collet is closed by a sleeve B65 Collet Chuck Assembly and Parts List
which moves forward on the collet closing angle. The B65
Item Part Number Qty Description
standard collet has RTV sealant in slots up to the Teflon
chip sleeve and seal. — 3757-00-00-000000 1 B65 Collet Chuck Assembly
1 3757-00-00-000009 1 Tool
2 CE 0375711 3 Spring Plunger Reid # ST-4N
3 CE 0375712 1 Spring Plunger Reid # K2-N
4 37570000000008 1 Key Screw
3
5 37570000000007 1 Key Pin
NG
E
6 37570000000006 1 Retaining Screw
7 37570000000005 1 Cam
I
RD
HA

8 CE 0360047100M 1 Spring-Spec. # C-0360-047-1000-M

1

9 37570000000004 1 Lock Pin for Cam

10 37570000000002 1 Cap
2

11 MS 0104220 3 M12 x 30 Socket Head Cap Screw

12 37570000000001 1 B65 Mount
13 CE 0375710 1 Collet Spring
14 37570000000003 1 Collet Sleeve
These units can be used for Dead-Length applications on
lathes with A2-6 spindle noses. Separate link-ups will be 15 0004628 1 1⁄8" Dia. x 5⁄16" Dowel Pin

needed for other lathes. Collet sold separately.

B65 Standard Collet B65 Style "S" Collet

Collet Dimensions
Dimensions Collet Capacity
A B C D
Collet Back Bearing Overall Head ID Stop
Style Diameter Length Diameter Thread Round Hex Square
Std. 2.832" (71.93) 4.328" (109.93) 3.603" (91.51) M66 x 1 ⁄ "(1.58) – 2.559" (65.00)
1 16 ⁄ "(1.58) – 2.216" (56.20)
1 16 ⁄ "(1.58) – 1.809" (45.90)
1 16

S22 2.832" (71.93) 4.328" (109.93) 3.603" (91.51) M66 x 1 1⁄8"(3.17) – 21⁄4" (57.15) 1⁄4"(6.35) – 115⁄16" (49.21) 1⁄4"(6.35) – 137⁄64" (40.08)

* No internal threads over 2.530" Rd., 2.191" Hex, 1.789" Sq. NOTE: Millimeters in parentheses.

B65 Collets – Standard and Style "S"

Round Smooth Round Serrated Hexagon Square Emergency
Description Part Number Part Number Part Number Part Number Part Number
B65 Solid Collet 3743-00-19- 3743-00-59- 3743-00-29- 3743-00-39- 3743-14-10-
B65 S22 Master Collet 5311-00-00- — — — —
S22 Pads 5611-00-19- 5611-00-59- 5611-00-29- 5611-00-39- 5611-14-10-
NOTE: Other configuration collets & pads available.
31
Stationary Collet Systems
B65 Collets

B65 Collets – Emergency Extended-Nose

Description Part Number Nose Length Pin Part No. ( 3⁄16" x 1")
B65 Emergency – Extended-Nose 3743-14-13-001875 1.5" from face TL-0006648

B65 Special Extended-Nose Collets

— Hardened and Ground
Hardened & Ground Collets were designed for the
times you require extended-nose collets due to tooling
interference. The hardened & ground collets are most
economical for long run jobs.

A B C
Part Number Smooth or Serrated Bore Nose Diameter Extension
93743-67-18- ⁄ " to 233⁄64" (3.17 to 63.89)
18
These dimensions are determined by
the customer, or Hardinge, to meet the
specific workpiece requirements.

NOTE: Millimeters in parentheses.

B65 Style "S22" Extended-Nose Master Collet

The Style "S" Extended-Nose Master Collets are ideal when
frequently changing bar stock diameters. Only the pads need to be
changed from one bar size to another, much quicker than changing
standard collets. The pads take up less storage space and are less
expensive than standard collets.

Description Part Number Nose Diameter

B65 S22 Master Collet 5311-54-00-000000 3.188" (80.97)
NOTE: Millimeters in parentheses.

B65 Style "S22" Extended-Nose Emergency Pads

The Special Style "S" Extended-Nose Emergency Pads are specifically
designed for the Extended-Nose "S22" Master Collet. The back of the pad
extends the full length of the master collet bore. This design ensures that the
closing forces are directly over the collet pads. This is a special order product.

Description Part Number Nose Diameter

B65 S22 Pads 95611-67-00-0769Q ⁄ " to 21⁄4" (3.17 to 57.15)
18

NOTE: Millimeters in parentheses.

32
 WORKHOLDING

Stationary Collet Systems

B65 Accessories
B65 Threaded Positive Solid Stops
The stop assembly is threaded into the back of the collet and can
be machined to locate the part for accurate length control.
Description Part Number
B65 Solid Stop Assembly 3759-00-00-000000
— Body 3759-00-00-000001
— Nut 1185-00-00-000000
— Threaded Stop (1" diameter screw) 1363-00-00-000000
NOTE: The stop can be installed in all solid and master collets internally
threaded with bores up to: 2.530" (64.2mm) Round; 2.191" (55.6mm)
Hex; 1.789" (45.4mm) Square.

B65 Guide Bushing

The Guide Bushing is used to guide and support the bar stock
into the bore of the collet when changing bars. The hole in
the bushing should be 1⁄32" (.79mm) larger than the bar stock.
The hole is bored to size by the customer. (Part Number
3761-00-00-000000)
Long Nozzle
B65 (Internal) Chip Shield Kits
The shield reduces the possibility of chips going through
the slots of the collet when through drilling or boring
second operation work. The threaded stop or guide
bushing cannot be used with the shield.
Thru-Coolant
Assembly
Description Part Number
Short Chip Shield
Short Sleeve Kit 3757-00-00-000010
— Shield 3757-00-00-000011
— Wrench 3757-00-00-000012
Short Nozzle
Long Coolant Nozzle 3757-00-00-000015 Thru-Coolant
Long Sleeve Kit 3757-00-00-000013 Assembly
— Shield 3757-00-00-000014
—Wrench 3757-00-00-000012
Short Coolant Nozzle 3757-00-00-000016
NOTE: The chip shield can be installed in all solid and master
collets below 2.43" (61.7mm) round.
Long Chip Shield
B65 Coolant Nozzles
The Coolant Nozzles are threaded onto the end of the
thru-spindle coolant assembly before the unit is inserted
into the draw tube. The short nozzle is for the long chip
shield and the long nozzle is for the short chip shield.

B65 Accessories Teflon Sleeve

Description Part Number An external Heat-Shrinkable Teflon Sleeve is

Bristol Wrench Handle 7909-00-00-000013 standard on all B65 collets with the straight slots
— Wrench .145" 7909-00-00-000002 which have a relief hole at the end. Older collets
Seal - Standard Collet (12) 7649-00-00-010000 with the tear-drop slot may not have the sleeve. Its
Seal - Style “S" (by dozen) 7643-00-00-010000 purpose is to help keep chips from getting into the
Clamp Asm. 1 ea. (3 Req.) 7627-00-00-000000 collet chuck assembly. The Teflon sleeve can easily be
Bristol “L" Wrench 7639-00-00-000000 replaced if it becomes damaged. It can also be added
RTV Sealant (for slots) CE-0010884-0832 to older B65 collets. The slots are sealed up to the
Teflon Sleeve 3757-00-00-0000A19 sleeve with RTV Sealant (Dow Corning #832).
33
Stationary Collet Systems
B42 Assemblies The B42 Stationary Collet Adapter Assembly is a Dead-
Length® system designed to provide precise length control of the
workpiece. This feature makes it possible to accurately transfer
parts from one spindle to the other within .0005" (.0127 mm).
5 6
The system uses either B42 Solid or B42 Style S10 Master Collets
1 7 8 and pads. The B42 Stationary Collet can be used on the Hardinge
machines indicated below as well as other machines with an A2-6
spindle nose. Separate linkups will be required.

9 Adapter Assembly and Parts List for the

Hardinge® Quest® TwinTurn® 65
Item Part Number Qty Description
10
— 3719-00-00-000001 1 B42 Collet Adapter Assembly
11 1 3719-00-00-000015 1 — Spring Assembly
B42 Assembly for the Hardinge 13 12
Quest TwinTurn 65 CNC Lathe (Items 1-4 in previous catalog—do not disassemble)
5 3111-00-00-000007 1 — Removable Keyscrew
6 3719-00-00-000002 1 — Mount
16 7 3719-00-00-000003 1 — Cap
14
8 3719-00-00-000005 1 — Cover
Coolant Nozzle 15 9 MS 0103617 4 — M6 x 16 SHCS
10 MS 0103515 4 — M5 x 10 SHCS
11 3719-00-00-000006 6 — Seal
12 MS 0104019 4 — M12 x 30 SHCS
The B42 Coolant Nozzle is threaded onto 13 3111-00-00-000008 1 — Keyscrew
the end of the through-spindle coolant
assembly before the unit is inserted into 14 3075-00-00-000004 6 — Plug
the draw tube. Coolant nozzle included. 15 3111-00-00-000011 1 — Coolant Nozzle
Part Number 3111-00-00-000011. 16 3719-00-00-000012 3 — Teflon Sleeve

Optional thru-spindle
B42 Adapter Assembly and Parts List for the
Coolant QUEST® LMC42 Lean Manufacturing Cell
Item Part Number Qty Description
— 3719-00-00-000024 1 B42 Collet Adapter Assembly
1 3719-00-00-000025 1 — Collet Sleeve
2 CE-1250156-1750 1 — Collet Sleeve Spring
3 3719-00-00-000026 1 — Spring Retainer
4 3719-00-00-000003 1 — Cap
B42 Assembly for the Hardinge QUEST 5 3075-00-00-000004 6 — Plug
LMC Lean Manufacturing Center 6 3719-00-00-000006 1 — Seal
7 3719-00-00-000005 1 — Cover
8 MS 0103617 4 — M6 x 16 SHCS
B42 extended-nose collets, expanding 9 MS 0103515 4 — M5 x 10 SHCS
collets, ejector stops, chip control and thru- 10 3719-00-00-000012 3 — Teflon Sleeve
spindle coolant are available per application. 11 B -0009500-0121 1 — Instructions

Machine Spindle & Key Screw

not part of Assembly
5
9 4 3
2 1
B42 Collet
not included with Assembly

6
10
7

34
 WORKHOLDING

Stationary Collet Systems

B42 Collets

Dimensions Collet Capacity

A B C D
Collet Back Bearing Overall Head ID Stop
Style Diameter Length Diameter Thread Round Hex Square
Std. 1.887" (47.93) 3.688" (93.68) 2.355" (59.82) M43 x 1 ⁄ "(1.58) – 1 ⁄ " (41.28)
1 16 58 ⁄ "(1.58) – 1 ⁄ " (35.72)
1 16 13 32 ⁄ "(1.58) – 19⁄64" (28.97)
1 16

S10 1.887" (47.93) 3.688" (93.68) 2.355" (59.82) M43 x 1 1⁄8"(3.17) – 1" (25.40) 1⁄4"(6.35) – 55⁄64" (21.83) 1⁄4"(6.35) – 45⁄64" (17.86)

NOTE: Millimeters in parentheses.

B42 Collets – Standard and "S10" Master Collets and Pads

Round Smooth Round Serrated Hexagon Square Emergency
Description Part Number Part Number Part Number Part Number Part Number
B42 Solid Collet 3719-00-19- 3719-00-59- 3719-00-29- 3719-00-39- 3719-14-10-
B42 S10 Master Collet 5205-00-00- — — — —
S10 Pads 5601-00-19- 5601-00-59- 5601-00-29- 5601-00-39- 5601-14-10-
NOTE: Other configuration collets & pads available.

B42 Emergency Collets—Standard and Extended-Nose

Even with the best planning, emergencies arise when your tool room and
production departments require a stepped, odd size or special-shaped collet.
On such occasions, use the Hardinge emergency collet. The soft face and pilot
hole allow rapid drilling, boring or stepping out to the exact required size. The
extended-nose allows deeper counterbores, when required, and tool clearance
for extended work. Emergency collets have internal threads for positive stops.

A B
Description Part Number Pilot Hole Nose Diameter Nose Length
B42 Emergency Collet 3719-14-11-000000 .250" (6.35) 1.970" (50.00) .375" (9.53)
B42 Extended-Nose 3719-14-11-000007 .250" (6.35) 1.970" (50.00) 1.250" (31.75)
Emergency Collet (Standard) (.875" over standard)
NOTE: Millimeters in parentheses.

35
Stationary Collet Systems
#22 B&S Assembly

The #22 B&S Dead-Length Collet Chuck System will provide minimal
tool interference while achieving shorter cycle times when your work is
under 11⁄4" diameter.

The nose diameter is just 3.5" by 2.3" (88.9 x 58.4mm) long with an
overall chuck length of 3.783" (96mm) from the spindle locating surface.
This stationary collet design provides precise length control of the
workpiece. The Dead-Length feature makes it possible to accurately
transfer parts from one spindle to the other within .0005" (.0127mm).
The system uses either #22, #22Y or #22SC B&S collets.

The #22 B&S Stationary Collet is used on the Hardinge QUEST®

TwinTurn® 65 CNC Turning Center and other machines that use #22
B&S Stationary Collet Systems.
6
5
8
7
1 9

16

10
11
13
12

14
This unit can be used for Dead-
Length applications on lathes with
A2-6 spindle noses. Separate
link-ups will be needed for other
15
lathes. Collet not included.

TT65 to #22 B&S Collet Assembly and Parts List

Item Part Number Qty Description
— 3111-00-00-000001 1 TT65 to #22 B&S Collet Assembly
1 3111-00-00-000015 1 — Spring and Sleeve Assembly
(Items 1-4 in previous catalog—do not disassemble)
5 3111-00-00-000007 1 — Removable Keyscrew
6 3111-00-00-000002 1 — Mount
7 3111-00-00-000003 1 — Cap
8 3111-00-00-000005 1 — Cover
9 MS 0103617 4 — M6 x 16 SHCS
10 MS 0103515 4 — M5 x 10 SHCS
11 3111-00-00-000006 6 — Seal
The #22 B&S Coolant Nozzle 12 MS 0104019 4 — M12 x 30 SHCS
is threaded onto the end of the
13 3111-00-00-000008 1 — Keyscrew
through-spindle coolant assembly
14 3075-00-00-000004 6 — Plug
before the unit is inserted into
the draw tube. A coolant nozzle is 15 3111-00-00-000011 1 — Coolant Nozzle
included with each assembly. Part 16 3111-00-00-000012 3 — Teflon Sleeve
Number 3111-00-00-000011. NOTE: Keyed collets are not standard.

36
 WORKHOLDING

Stationary Collet Systems

#22 B&S Collets

The #22 B&S Stationary Collet is used on the Hardinge

QUEST® TwinTurn® 65 CNC Turning Center and other machines
that use #22 B&S Stationary Collet Systems.

Dimensions
Dimensions Collet Capacity
A B C D
Part Back Bearing Overall Collet Head
Description Number Figure Style Diameter Length Diameter Thread Round Hexagon Square

Collet, Solid 3111 1 22 1.498" 4.250" 1.925" 11⁄4" 15⁄64" 7

⁄8"
(38.05) (107.95) (48.90) — (31.75) (27.38) (22.22)
Collet, Solid 3109 2 22Y 1.498" 4.312" 1.925" .092" 5
⁄64" 1
⁄16"
(38.05) (109.53) (48.90) — (2.33) (1.98) (1.58)
Collet, Solid 3227 1 22SC 1.498" 4.250" 1.925" 11⁄4" 15⁄64" 7
⁄8"
Stop Collet (38.05) (107.95) (48.90) 1.291" x 24 RH (31.75) (27.38) (22.22)
NOTE: Millimeters in parentheses.

1 2

#22 B&S Collets – Standard and Stop Collets

Round Smooth Rd. Serrated Hexagon Square
Description Part Number Part Number Part Number Part Number
#22 B&S Standard 3111-00-19- 3111-00-59- 3111-00-29- 3111-00-39-
#22Y B&S Standard 3109-00-19- 3109-00-59- 3109-00-29- 3109-00-39-
#22SC B&S Stop 3227-00-19- 3227-00-59- 3227-00-29- 3227-00-39-
NOTE: Other configuration collets also available.

#22 B&S Emergency Collets

Emergency Part Number Pilot Hole
#22 Collet Blank 3111-10-00 —
#22SC-E 3233-14-10- 14⁄"
#22SC-E1 3233-12-10- 1⁄16"

#22SC-E2 3233-13-10- 1⁄8"

SS22 Solid Collet SE Ejector Stop

Stop for #22SC for #22SC
B&S Collet B&S Collets
The solid stop assembly The threaded
is threaded into the ejector stop
back of the #22 B&S assembly is threaded Description Part Number
collet and the stop into the back of the Assembly 3273-00-00-000000
rod can be machined Description Part Number collet. The insert – Body 3275-00-00-000000
to length to locate Assembly 3269-00-00-000000 can be machined to – Plunger 3277-00-00-000000
the part. Collet sold – Body 3271-00-00-000000 locate the part. – Insert 3279-00-00-000000
separately. – Nut 5-0001466-B Collet sold – Nut (2 ea.) 5-0001466-B
– Stop Rod 1071-00-00-000000 separately. – Spring 3281-00-00-000000

37
Stationary Collet Systems
#22 B&S

These units can be used for Dead-Length applications

on lathes with A2-5 spindle noses. Separate link-ups
will be needed for other lathes.

#22 B&S Collets sold separately on previous page.

A2-5 16C Spindle to #22 B&S Collet Adaptation Chuck

Assembly Length Length Flange Nose Thru-
Description Part Number Spindle L L2 OD OD Capacity
A2-5 16C to #22 B&S 1717-09-00-000000 A2-5 2.285" (58.04) .915" (23.24) 5.500" (139.7) 3.400" (86.36) 1.25" (31.75)
NOTE: Millimeters in parentheses.

Parts List
Description Qty Part Number
Sleeve 1 1717-09-00-000003
Mount 1 1717-09-00-000001
Cap 1 1717-09-00-000002
Bolts for Cap – M6 x 16 4 MS 0103617
Mounting Bolts – M10 x 25 3 MS 0104019
Slinger Hole Plug 6 1717-09-00-000004
Orientation Pin 1⁄8" Dia. (Option) 1 3757-00-00-000007

38
 WORKHOLDING

Stationary Collet Systems

#11 B&S Dead-Length Adapter

Assembly Parts List

Description Qty Part Number
Sleeve 1 3075-00-00-000003
Mount 1 3075-00-00-000001
Cap 1 3075-00-00-000002
Bolts for Cap – M5 x 16 4 MS 0103517
Mounting Bolts – M10 x 25 3 MS 0104019
Slinger Hole Plug 6 3075-00-00-000004
Orientation Pin (Option) 1 – 3⁄32" Diameter Pin

GT 5C to #11 B&S Collet Adaptation Chuck

Assembly Length Length Flange Step Nose Collet Thru-
Model Part Number Spin. L L2 OD OD OD Capacity
GT 5C 3075-00-00-000000 GT 2.820"(71.62) .76"(19.30) 5.000"(127.00) 3.400"(86.36) 2.830"(71.88) ⁄ "(21.82)
55 64

NOTE: Millimeters in parentheses.

1 2

#11 B&S Collet Dimensions

Dimensions Collet Capacity
A B C D
Part Back Bearing Overall Collet Head
Description Number Figure Style Diameter Length Diameter Thread Round Hexagon Square
Collet, Solid 3057 1 11 1.061" 2.875" 1.490" 78⁄" 34⁄" 5⁄8"

(26.95) (73.03) (37.85) — (22.22) (19.05) (15.87)

Collet, Solid 3055 2 11Y 1.061" 2.937" 1.490" 55
⁄64" 3
⁄4" 39
⁄64"
(26.95) (74.60) (37.85) — (21.83) (19.05) (11.11)
Collet, Solid 3217 1 11SC 1.061" 2.875" 1.490" 55
⁄64" 47
⁄64" 19
⁄32"
Stop Collet (26.95) (73.03) (37.85) .916" x 24 RH (21.83) (18.65) (15.08)
Collet, Solid MP3591 2 11SCY 1.061" 2.937" 1.490" 55⁄64" 47⁄64" 19⁄32"

Stop Collet (Special Collet) (26.95) (74.60) (37.85) .916" x 24 RH (21.83) (18.65) (15.08)
NOTE: Millimeters in parentheses.
#11 B&S Collets – Standard and Stop Collets Special Collets are not stock items.

Round Smooth Round Serrated Hexagon Square

Description Part Number Part Number Part Number Part Number
#11 Solid Collet 3057-00-19- 3057-00-59- 3057-00-29- 3057-00-39-
#11Y Solid Collet 3055-00-19- 3055-00-59- 3055-00-29- 3055-00-39-
#11SC Stop Collet 3217-00-19- 3217-00-59- 3217-00-29- 3217-00-39-

SS11 Solid Collet Stop for SE11 Ejector

#11SC B&S Collets Stop for #11SC
The solid stop assembly
is threaded into the back
B&S Collets
The threaded ejector
of the #11 B&S collet
stop assembly is Description Part Number
and the stop rod can
threaded into the Assembly 3265-00-00-000000
be machined to
Description Part Number back of the collet. – Body 3267-00-00-000000
length to locate
Assembly 3259-00-00-000000 The insert can be – Plunger 1061-00-00-000000
the part. Collets
– Body 3261-00-00-000000 machined to locate – Insert 1063-00-00-000000
sold separately.
– Nut U-0004141-C the part. Collets sold – Spring 1065-00-00-000000
– Stop Rod 3263-00-00-000000 separately. – Nuts {2} U-0004141-C
39
Manual Jaw Chucks
2, 3, and 4-jaw Chucks are available for manual
machines with Hardinge® 5C Spindles. Bold part
numbers are included with the chuck below.

Hardinge and other CNC lathes use Sure-Grip®

3-Jaw Power Chucks. Information for Sure-Grip
2 3 chucks, along with full line of jaws for all chucks,
can be found in Hardinge brochure number 2357
(chucks) and 2358 (jaws).

Part Numbers
Hard
Description Figure Chuck Soft Jaw OD Jaw ID Jaw Reversible Jaw Wrench
5" 3-Jaw Universal
Taper-Nose Spindle 2 53B-5405-HB 53B-5405-SJ — — 53B-5405-HJ 53B-5405-CK
Threaded-Nose Spindle 2 53B-5405-HB D 53B-5405-SJ — — 53B-5405-HJ 53B-5405-CK
5" 4-Jaw Independent
Taper-Nose Spindle 2 54B-5405-HB — — — 54B-5405-SJR 54B-5405-CK
Threaded-Nose Spindle 2 54B-5405-HB D — — — 54B-5405-SJR 54B-5405-CK
6" 2-Jaw Universal (Jaws not included)
Taper-Nose Spindle 3 62-5405-HB 62-5405-SJ — — — 62-5405-CK
Threaded-Nose Spindle 3 62-5405-HB D 62-5405-SJ — — — 62-5405-CK
6" 3-Jaw Universal
Taper-Nose Spindle 2 63B-5405-HB 63B-5405-SJ — — 63B-5405-HJ 63B-5405-CK
Threaded-Nose Spindle 2 63B-5405-HB D 63B-5405-SJ — — 63B-5405-HJ 63B-5405-CK
6" 4-Jaw Independent
Taper-Nose Spindle 2 64B-5405-HB 64B-5405-STJ — — 64B-5405-HTJ 64B-5405-CK
Threaded-Nose Spindle 2 64B-5405-HB D 64B-5405-STJ — — 64B-5405-HTJ 64B-5405-CK
8" 3-Jaw Independent
A2-5 Spindle Mount 2 83-5405 — — — 83-5405-HRJ 83-5405-KEY
10" 3-Jaw Independent
A2-5 Spindle Mount 2 13-5405 — — — 13-5405-HRJ 13-5405-KEY

Safety Information for 5C Spindle Tooling - Read Carefully

RECOMMENDATIONS FOR SAFE OPERATING CONDITIONS
FOR HARDINGE 5C CAST IRON SPINDLE TOOLING
NOTE: All tooling is assumed NOT to be weakened by usage and to be free of defects.

SPINDLE TOOLING SPEED DRAWBAR FORCE

2", 3" & 4" Step Chuck Closers Less than 5000 rpm Less than 5000 lb force
5" and 6" Step Chuck Closers Less than 4000 rpm Less than 5000 lb force

FACE PLATES AND FIXTURE PLATES

The maximum surface speed of 6000
fpm includes allowances made for load SPINDLE TOOLING SPEED
eccentricities, clamping forces and stress 3" Fixture Plates Less than 3500 rpm
concentrations. Operator discretion is 5" Fixture Plates Less than 3000 rpm
needed because precise guidelines can- 8.875" Fixture Plates Less than 2000 rpm
not be established due to the uncertain- 5" Jaw Chuck Less than 3000 rpm
ties in operating conditions. Following is a
6" Jaw Chuck Less than 2500 rpm
rough guideline.All rpm recommendations
listed below result in surface speeds of 7" Face Plate with angle plate Less than 2500 rpm
less than 6000 fpm. 9" Face Plate with angle plate Less than 2000 rpm

40
 WORKHOLDING

Collet Cross Reference by Machine Manufacturer

Manufacturer of Manufacturer of
Machine or Fixture Collet Page Machine or Fixture Collet Page
All Tool 4C, 5C 43 Kearney & Trecker Hldr 9026 1K 42
American 3H, 6H 42, 43 Kearney & Trecker Hldr 9027 1K 42
Ames 1AM, 3AM 42 Knight 1K 42
Armor 2M 42 L-W 4C, 4NS 43
Arrow 1A, 3AT, 3C, 5C 42, 43 LeBlond 3C, 4C, 4NS, 6L, 10L 42, 43, 44
Arter 5C 43 Lee 5C 43
Atlas 3AT 42 Lehmann-Brandes 5NS, 8WN 43, 44
Axelson Requires Sjogren Chuck — Linley LB 45
B&S Holders 156, 158, 160 1K 42 Lodge & Shipley 3H 42
B&S Holders 246, 256 1K 42 Logan 3AT, 3C, 5C 42, 43
Barker 1A, 3C 42 Majestic 4NS 43
Barrett Requires Sjogren Chuck — Master 5C 43
Becker 2AB, 2B, 3B 42 Mead 3C, 5C 42, 43
Benchmaster 2M 42 Millmaster 9B 44
Boye & Emmes 6H, 8H 43, 44 Monarch 2H, 3H, 5C, 5M, 6H 42, 43
Bradford 5NS 43 Mueller 6H 43
Bridgeport 2M, 7 B & S, B3, R8 42, 44, 45 Nebel 6H, 8H 43, 44
Brown & Sharpe 7B, 9B 44 Nichols 4NS 43
Burke 3C, 9B 42, 44 Oliver Ace 1AM, 5C, 8H 42, 43, 44
Carroll 4NS, 4C, 5C, 115 43, 45 Pacific R8 45
Carroll & Jamieson 3H, 5C 42, 43 Pearson R8 45
Carter & Hakes 4OS 43 Porter-Cable 2H, 5C 42, 43
Cataract See Hardinge. 42, 43, 44 Potter 4C 43
Chard Requires Sjogren Chuck — Pratt & Whitney 3PN, 4PN, 5PN, 5P, 7P, 10P 42, 43, 44
Cincinnati 1AM, 3H, 6H, 8H 42, 43, 44 Rahn-Larmon 6H, 8H 43, 44
Clausing 3C, 5C 42, 43 Reed-Prentice 2VB, 6L 42, 43
Colborne 5C 43 Rivett 2NS, 2OS, 3NS, 4NS, 4OS 42, 43
Crowningshield-Harris 2AB 42 Rivett 4S, 5C, 5NS, 5OS, 6NS, 6R 43
Crystal Lake 3C, 4C, 5C 42, 43 Rocheleau 5C 43
Cushman, 11⁄8" capacity 115 45 Rockford 2H, 3H 42
Cushman, 13⁄4" capacity 215 45 Rotex 9B 44
Cushman, 31⁄4" capacity 315 45 Rouse 4C, 4PN 43
Dalton 3C, 4C 42, 43 Royal Oak RO 45
Dandy 5C 43 Rusnok 9B 44
Davis 2H, 3H, 6H 42, 43 Schaublin 20W, 25W, 25W Stepped 44
Delta 5C, R8 43, 45 Schauer 3C, 5C 42, 43
Diamond 7B, 9B 44 Sebastian 2J, 2S, 3H, 5C, 6H 42, 43
Dykrex 3C, 5C 42, 43 Seneca 2S, 3S 42
Elgin 2AB, 3C, 4C, 5C 42, 43 Seneca Falls RO, 5C 43, 45
Ellis 3C 42 Sheldon 4C, 5C 43
Fay & Scott 5NS 43 Sidney 6H, 8H 43, 44
Flather 3C, 4NS, 4OS, 5NS 42, 43 Sjogren, 11⁄16" capacity 1J, 5C 42, 43
Fray 2M, 7B 42, 43 Sjogren, 13⁄8" capacity 2J 42
Glenbard 5C 43 Sjogren, 13⁄4" capacity 3J 43
Gorton 4NS, 9B, GTM, R8 43, 44, 45 Sjogren, 21⁄4" capacity 22J 44
Graham Requires Sjogren Chuck — Sjogren, 31⁄2" capacity 49J 44
Greaves-Klusman 3H 42 Sloan & Chace 5SC, 52SC 43, 45
Hamilton 2B, 4C, 5C 42, 43 South Bend 1A, 2A, 2S, 3C, 4C 42, 45
Hancock 5C 43 South Bend 4NS, 5C, 5NS, 6H, 6K 43
Hardinge® 1C, 2VB, 3C, 4C, 42, 43 Springfield 3H, 6H, 8H 42, 43, 44
Hardinge® 5C, 16C, 20C, 25C 43, 44 Stark 4S, 32S, 42S 43, 44
Hartford Requires Sjogren Chuck — Taft-Pierce 2H 42
Heald 9B 44 Unimatic 5C 43
Hendey 2H, 3H, 6H, 8H 42, 43, 44 Van Norman 5V, 50V 43, 45
Holland 7B 44 Vernon 9B, LB 44, 45
Hydromat 25W, 25W OS & Step, B32 & Step 44, 45 Viking 9B 44
Hydromat B32/45 & Step, B45 & Step, Pro-20 & Step 45 Wade 5C, 8WN 43, 44
Index 3C, 9B 42, 44 Walcott 2H, 6H 42, 43
Jacobs JC 45 Western Requires Sjogren Chuck —
Jefferson 7B 44 Whitcomb-Blaisdell 4C 43
Johansson 2M, 7B 42, 44 Willard 3H 42
Jones & Lamson J & L Center Mill 45 Worcester 2H, 3H 42

41
Collets by Style
Dimensions Rated Capacity
A B C
Part Back Overall
Collet Number Figure Bearing Length Thread Round Hexagon Square
.650" 2.563" 1
⁄2" 7
⁄16" 11
⁄32"
1A 9-1501 1 (16.51) (65.10) .640" x 26 RH (12.70) (11.11) (8.73)
1.125" 3.906" 1" 7⁄8" 23⁄32"

1AM 1505 1 (28.58) (99.21) 1.118" x 24 RH (25.40) (22.23) (18.26)

.437" 1.750" 5
⁄16" 7
⁄32" 3
⁄16"
1B 9-1509 2 (11.10) (44.45) .312" x 30 RH (7.94) (5.56) (4.76)
.335" 1.438" 1
⁄4" 7
⁄32" 11
⁄64"
1C 1511 1 (8.51) (36.53) .322" x 40 RH (6.35) (5.56) (4.37)
1.250" 3.000" 11⁄16" 7
⁄8" 3
⁄4"
1J 1513 1 (31.75) (76.20) 1.238" x 20 RH (26.99) (22.23) (19.05)
1.250" 2.813" 1" 7
⁄8" 23
⁄32"
1K 1521 3 (31.75) (71.45) — (25.40) (22.23) (18.26)
.860" 3.313" 11⁄16" 19⁄32" 15⁄32"

2A 9-1527 1 (21.84) (84.15) .850" x 20 RH (17.46) (15.08) (11.91)

.750" 2.563" 5⁄8" 31⁄64" 25⁄64"

2AB 9-1529 2 (19.05) (65.10) .500" x 20 RH (15.88) (12.30) (9.92)

.629" 3.188" 1⁄2" 7⁄16" 11⁄32"

2AM 9-1531 1 (15.98) (80.98) .622" x 24 RH (12.70) (11.11) (8.73)

.590" 2.031" 1⁄2" 7⁄16" 11⁄32"

2B* 9-1533 2 (14.99) (51.59) .437" x 26 RH (12.70) (11.11) (8.73)

.450" 1.812" 11
⁄32" 19
⁄64" 15
⁄64"
2C 9-1535 1 (11.43) (46.02) .442" x 30 RH (8.73) (7.54) (5.95)
.826" 4.250" 5⁄8" 17⁄32" 7⁄16"

2H 1537 1 (20.98) (107.95) .799" x 20 RH (15.88) (13.50) (11.11)

1.625" 3.250" 13⁄8" 13⁄16" 1"
2J 1539 1 (41.28) (82.55) 1.611" x 18 RH (34.93) (30.16) (25.40)
.950" 3.000" 3⁄4" 21⁄32" 17⁄32"

2L 9-1553 1 (24.13) (76.20) .938" x 20 RH (19.05) (16.67) (13.50)

2 Morse 2.875" 1⁄2" 13⁄32" 11⁄32"

2M 1555 4 2 Morse (73.03) .375" x 16 RH (12.70) (10.31) (8.73)

.324" 1.562" 1
⁄4" 13
⁄64" 11
⁄64"
2NS 1693 1 (8.23) (39.67) .318" x 40 RH (6.35) (5.16) (4.37)
.299" 1.250" 3⁄16" 5⁄32" 1⁄8"

2OS 1691 1 (7.59) (31.75) .263" x 40 RH (4.76) (3.97) (3.18)

.750" 3.234" 9⁄16" 31⁄64" 25⁄64"

2S 1557 1 (19.05) (82.14) .745" x 18 RH (14.29) (12.30) (9.92)

.595" 2.438" 1⁄2" 7⁄16" 11⁄32"

2VB 9-1561 2 (15.11) (61.93) .437" x 26 RH (12.70) (11.11) (8.73)

.750" 3.188" 5⁄8" 17⁄32" 7⁄16"

3AM 9-1569 1 (19.05) (80.98) .742" x 24 RH (15.88) (13.50) (11.11)

.687" 2.313" 1⁄2" 7⁄16" 11⁄32"

3AT 1573 1 (17.45) (58.75) .637" x 26 RH (12.70) (11.11) (8.73)

.875" 3.438" 3⁄4" 41⁄64" 17⁄32"

3B 1581 2 (22.23) (87.33) .625" x 16 RH (19.05) (16.27) (13.50)

.650" 2.688" 1⁄2" 7⁄16" 11⁄32"

3C 1583 1 (16.51) (68.28) .640" x 26 RH (12.70) (11.11) (8.73)

1.125" 4.438" 7⁄8" 3⁄4" 5⁄8"

3H 1589 1 (28.58) (112.73) 1.050" x 20 RH (22.23) (19.05) (15.88)

2.000" 3.750" 13⁄4" 11⁄2" 11⁄4"
3JA 1593 1 (50.80) (95.25) 1.988" x 20 RH (44.45) (38.10) (31.75)
.687" 2.875" 1⁄2" 7⁄16" 11⁄32"

3NS 1601 1 (17.45) (73.03) .647" x 20 RH (12.70) (11.11) (8.73)

* Do not confuse with 2B Simmons - See Turret Lathe chapter in Automatics Catalog — #2287 NOTE: Millimeters in parentheses.
A Internal Stop Thread is 1.790 x 24 RH Part numbers preceded by 9 are special order.

1 2 3 4
42
 WORKHOLDING

Collets by Style
Dimensions Rated Capacity
A B C
Part Back Overall
Collet Number Figure Bearing Length Thread Round Hexagon Square
.589" 2.094" 3
⁄8" 5
⁄16" 17
⁄64"
3OS 9-1603 1 (14.96) (53.19) .518" x 26 RH (9.53) (7.94) (6.75)
.650" 2.063" 1⁄2" 7⁄16" 11⁄32"

3PN 9-1605 1 (16.51) (52.40) .645" x 24 RH (12.70) (11.11) (8.73)

.599" 2.063" 3
⁄8" 5
⁄16" 17
⁄64"
3PO 9-1607 1 (15.21) (52.40) .500" x 24 RH (9.53) (7.94) (6.75)
1.000" 4.594" 3⁄4" 21⁄32" 17⁄32"

3S 9-1609 1 (25.40) (116.69) .995" x 20 RH (19.05) (16.67) (13.50)

.350" 1.587" 3
⁄16" 5
⁄32" 1
⁄8"
3SC 9-1613 1 (8.89) (40.30) .293" x 36 RH (4.76) (3.97) (3.18)
.589" 2.125" 3
⁄8" 5
⁄16" 17
⁄64"
3SS 9-1611 1 (14.96) (53.98) .515" x 26 RH (9.53) (7.94) (6.75)
.950" 3.000" 3⁄4" 21⁄32" 17⁄32"

4C 1621 1 (24.13) (76.20) .938" x 20 RH (19.05) (16.67) (13.50)

.826" 3.500" 5
⁄8" 17
⁄32" 7
⁄16"
4NS 1625 1 (20.98) (88.90) .800" x 20 RH (15.88) (13.50) (11.11)
.750" 2.781" 1⁄2" 7⁄16" 11⁄32"

4OS 9-1629 1 (19.05) (70.64) .660" x 20 RH (12.70) (11.11) (8.73)

1.000" 2.906" 3⁄4" 21⁄32" 17⁄32"

4PN 9-1631 1 (25.40) (73.81) .995" x 16 RH (19.05) (16.67) (13.50)

.998" 3.250" 3⁄4" 21⁄32" 17⁄32"

4S 9-1635 1 (25.35) (82.55) .982" x 20 RH (19.05) (16.67) (13.50)

1.250" 3.281" 11⁄16" 29⁄32" 3⁄4"

5CA 1001 1 (31.75) (83.34) 1.238" x 20 RH1 (26.99) (23.02) (19.05)

1.438" 3.438" 7
⁄8" 3
⁄4" 5
⁄8"
5M 9-1643 2 (36.53) (87.33) 1.238" x 20 RH (22.23) (19.05) (15.88)
1.062" 4.219" 7⁄8" 3⁄4" 5⁄8"

5NS 9-1647 1 (26.97) (107.16) 1.050" x 20 RH (22.23) (19.05) (15.88)

1.062" 3.500" 3⁄4" 41⁄64" 33⁄64"

5OS H5026 1 (26.97) (88.90) .937" x 18 RH (19.05) (16.27) (13.10)

.812" 3.687" 5⁄8" 17⁄32" 7⁄16"

5P 9-1651 1 (20.62) (93.65) .807" x 24 RH (15.88) (13.50) (11.11)

1.312" 3.406" 1" 7⁄8" 23⁄32"

5PN 9-1653 1 (33.32) (86.51) 1.307" x 16 RH (25.40) (22.23) (18.26)

.600" 2.438" 3⁄8" 21⁄64" 17⁄64"

5SC 9-1655 1 (15.24) (61.93) .500" x 26 RH (9.53) (8.33) (6.75)

1.250" 3.281" 11⁄16" 29⁄32" 3⁄4"

5ST 1017 1 (31.75) (83.34) 1.238" x 20 RH (26.99) (23.02) (19.05)

.850" 3.875" 9⁄16" 31⁄64" 25⁄64"

5V 9-1657 1 (21.59) (98.43) .775" x 18 RH (14.29) (12.30) (9.92)

1.375" 4.750" 11⁄8" 31⁄32" 51⁄64"

6H 1667 1 (34.93) (120.65) 1.300" x 20 RH (28.58) (24.61) (20.24)

.842" 3.000" 5⁄8" 17⁄32" 7⁄16"

6K 1671 1 (21.39) (76.20) .762" x 26 RH (15.88) (13.50) (11.11)

1.250" 4.438" 1" 7⁄8" 23⁄32"

6L 1675 1 (31.75) (112.73) 1.178" x 20 RH (25.40) (22.23) (18.26)

1.312" 5.906" 1" 55⁄64" 45⁄64"

6NS 1663 1 (33.32) (150.01) 1.234" x 14 RH (25.40) (21.83) (17.86)

1.375" 4.938" 11⁄8" 31⁄32" 25⁄32"

6R 1679 1 (34.93) (125.43) 1.300" x 20 RH (28.58) (24.61) (19.85)

A – Internal stop thread is 1.041" x 24 RH. NOTE: Millimeters in parentheses.
Part numbers preceded by 9 or H are special order.

1 2

43
Collets by Style
Dimensions Rated Capacity
A B C
Part Back Overall
Collet Number Figure Bearing Length Thread Round Hexagon Square
7B&S 3.125" 1
⁄2" 13
⁄32" 11
⁄32"
7B 9-1685 2 7B&S (79.38) .375" x 16 RH (12.70) (10.32) (8.73)
7B&S 2.875" 1
⁄2" 13
⁄32" 11
⁄32"
7B&S 9-1687 2 7B&S (73.03) .375" x 16 RH (12.70) (10.32) (8.73)
1.125" 4.750" 7
⁄8" 3
⁄4" 5
⁄8"
7P 9-1689 1 (28.58) (120.65) 1.120" x 20 RH (22.23) (19.05) (15.88)
1.062" 3.500" 7
⁄8" 3
⁄4" 5
⁄8"
7R 2581 3 (26.97) (88.90) — (22.22) (19.05) (15.88)
1.500" 4.750" 11⁄4" 11⁄16" 7⁄8"

8H 9-1695 1 (38.10) (120.65) 1.425" x 20 RH (31.75) (26.99) (22.23)

2.375" 5.906" 21⁄8" 127⁄32" 11⁄2"
8ST 9-1697 1 (60.33) (150.01) 2.354" x 12 RH (53.98) (46.83) (38.10)
1.250" 3.875" 1" 7
⁄8" 23
⁄32"
8WN 1699 1 (31.75) (98.43) 1.245" x 16 RH (25.40) (22.23) (18.26)
9B&S 4.125" 3
⁄4" 41
⁄64" 17
⁄32"
9B 9-1707 2 9B&S (104.78) .500" x 13 RH (19.05) (16.27) (13.50)
1.562" 5.500" 11⁄4" 11⁄16" 7
⁄8"
10L 9-1713 1 (39.67) (139.70) 1.490" x 18 RH (31.75) (26.99) (22.23)
1.500" 4.750" 11⁄4" 11⁄16" 7⁄8"

10P 9-1715 1 (38.10) (120.65) 1.495" x 20 RH (31.75) (26.99) (22.23)

1.889" 4.516" 15⁄8" 113⁄32" 19⁄64"
16C A 1717 1 (47.98) (114.71) 1.870" x 1.75 mm RH1 (41.28) (35.72) (28.97)
2.378" 6.250" 2" 13⁄4" 127⁄64"
20C B 1701 (60.40) (158.75) M60-1.5mm RH (50.80) (44.85) (36.07)
.787" 2.719" Buttress 9
⁄16" 31
⁄64" 25
⁄64"
20W 1777 1 (19.99) (69.06) .775" X 6 thrds/cm RH (14.29) (12.30) (9.92)
2.562" 4.000" 21⁄4" 115⁄16" 19⁄16"
22J 1719 1 (65.07) (101.60) 2.550" x 18 RH (57.15) (49.21) (39.69)
2.930" 6.480" 2.559" 2.216" 1.808"
25C C 1801 1 (74.42) (161.49) M73 x 1.5mm RH (65.00) (56.29) (43.95)
25W 1901 5 .984" 3.719" 3
⁄4" 41
⁄64" 17
⁄32"
(24.99) (94.46) .970" x 15 RH Buttress (19.05) (16.27) (13.49)
25W OS Thru 1903 4 .984" 3.719" 3⁄4" 41⁄64" 17⁄32"

(Oversize) (24.99) (94.46) .970" x 15 RH Buttress (19.05) (16.27) (13.49)

25W OS 1903 4 .984" 3.719" .751" - 1" .642" - 7⁄8" .532" - 3⁄4"
Stepped (24.99) (94.46) .970" x 15 RH Buttress (19.07 - 25.40) (16.30 - 22.22) (13.51 - 19.05)
.703" 2.563" 1⁄2" 7⁄16" 11⁄32"

32S 1723 1 (17.86) (65.10) .690" x 24 RH (12.70) (11.11) (8.73)

3.875" 5.000" 31⁄2" 3" 27⁄16"
35J 9-1727 1 (98.43) (127.00) 3.861" x 18 RH (88.90) (76.20) (61.91)
1.250" 3.688" 1" 7⁄8" 23⁄32"

42S 9-1729 1 (31.75) (93.68) 1.236" x 20 RH (25.40) (22.23) (18.26)

A - Internal stop thread is 1.687" x 20 RH. NOTE: Millimeters in parentheses.
B - Internal stop thread is M53 x 1mm RH. Part numbers preceeded by 9 are special order.
C - Internal stop thread is 25⁄8 - 24 TPI RH.

1 3 4

2 5

44
 WORKHOLDING

Collets by Style
Dimensions Rated Capacity
A B C
Part Back Overall
Collet Number Figure Bearing Length Thread Round Hexagon Square
15⁄16" 13⁄16" 21⁄32"
1.250" 4.000"
50V 1731 6 (31.75) (101.60) 1.125" x 24 RH (23.81) (20.64) (16.67)
.800" 3.688" 5
⁄8" 17
⁄32" 7
⁄16"
52SC 9-1733 1 (20.32) (93.68) .795" x 20 RH (15.88) (13.50) (11.11)
1.344" 3.500" 11⁄8" 31
⁄32" 51
⁄64"
115 1735 1 (34.14) (88.90) 1.307" x 20 LH (28.58) (24.61) (20.24)
2.030" 4.750" 13⁄4" 11⁄2" 17⁄32"
215 9-1739 1 (51.56) (120.65) 1.990" x 18 LH (44.45) (38.10) (30.96)
3.687" 5.500" 31⁄4" 213⁄16" 21⁄4"
315 1743 1 (93.65) (139.70) 3.622" x 16 LH (82.55) (71.44) (57.15)
.650" 3.031" 1⁄2" 7⁄16" 11⁄32"

B3 1745 5 (16.51) (76.99) .437" x 20 RH (12.70) (11.11) (8.73)

B32 1.259" 4.008" Buttress .943" .817" .667"
Thru-Hole 2249 1 (31.97) (101.80) 1.169" x 15 RH (23.95) (20.75) (16.94)
B32 1.259" 4.008" Buttress .943" to 1.25" .817" to 1.091" .667" to .89"
Stepped 2249 1 (31.97) (101.80) 1.169" x 15 RH (23.95 to 3.17) (20.75 to 17.71) (16.94 to 22.6)
59⁄64" .817" .667"
B32/45 1.259" 4.623" Buttress
Thru-Hole 2239 4 (page 44) (31.97) (117.42) 1.169" x 15 RH (23.41) (20.75) (16.94)
B32/45 1.259" 4.623" Buttress .922" to 13⁄4" .817" to 11⁄2" .667" to 11⁄4"
Stepped 2241 4 (page 44) (31.97) (117.42) 1.169" x 15 RH (23.4 to 44.45) (20.75 to 38.10) (16.94 to 31.7)
B45 1.771" 4.290" 113⁄32" 1.240" 1.013"
Thru-Hole 2243 1 (44.98) (108.96) M42 x 1.5 RH (35.71) (31.49) (25.73)
B45 1.771" 4.290" 1.407" to 13⁄4" 1.240" to 11⁄2" 1.013" to 1.25"
Stepped 2245 1 (44.98) (108.96) M42 x 1.5 RH (35.73 to 44.45) (31.49 to 38.10) (25.73 to 31.7)
.780" 3.031" 5⁄8" 17⁄32" 7⁄16"

D5 9-1747 5 (19.81) (76.99) .500" x 20 RH (15.88) (13.50) (11.11)

.625" 2.437" 1⁄2" 7⁄16" 11⁄32"

GTM 1789 5 (15.88) (61.90) .437" x 20 RH (12.70) (11.11) (8.73)

J & L .999" 4.375" 3
⁄4" 41
⁄64" 33
⁄64"
Center Mill MP2932 7 (25.37) (111.13) — (19.05) (16.27) (13.10)
1.360" 4.000" 13⁄16" 1" 13⁄16"

JC 1751 6 (34.54) (101.60) — (30.16) (25.40) (20.64)

.687" 2.000" 1⁄2" 7⁄16" 11⁄32"

LB 1755 2 (17.45) (50.80) — (12.70) (11.11) (8.73)

Pro 20 .7874" 3.700" Buttress .5708" .4921" .3937"
Thru-Hole 2247 4 (page 44) (20) (93.98) .775" x 6 Thrds/cm (14.50) (12.5) (10.0)
Pro 20 .7874" 3.700" Buttress .5708" to .7874" .4921" to .6693" .3937" to .551"
Stepped 2247 4 (page 44) (20) (93.98) .775" x 6 Thrds/cm (14.50 to 20.0) (12.5 to 17.0) (10.0 to 14.0)
1.250" 2.938" 11⁄8" 31⁄32" 25⁄32"

RO 9-1769 3 (31.75) (74.63) .875" x 16 RH (28.58) (24.61) (19.85)

1.250" 4.437" .800" 11⁄16" 9⁄16"

RO 9-1771 4 (31.75) (112.70) .875" x 16 RH (20.32) (17.46) (14.29)

1.250" 4.437" 11⁄8" 31⁄32" 25⁄32"

RO 9-1773 4 (31.75) (112.70) .875" x 16 RH (28.58) (24.61) (19.85)

1.250" 2.938" .800" 11⁄16" 9⁄16"

RO 9-1767 3 (31.75) (74.63) .875" x 16 RH (20.32) (17.46) (14.29)

.950" 4.000" 3⁄4" 41⁄64" 17⁄32"

R8 1757 5 (24.13) (101.60) .437" x 20 RH (19.05) (16.27) (13.50)

NOTE: Millimeters in parentheses.
Part numbers preceeded by 9 or MP are special order.

1 2 3 4

5 6 7

45
 ?
Frequently Asked Questions

Why buy a Precision Machined Collet? Why do I need Dead-Length® Collets or

A precision machined collet has a head angle and bore that Step Chucks?
are case hardened to 60 to 63 Rockwell. This will give you All draw-in collets have a diameter-to-length ratio when doing
the maximum life possible. The bore is precision machined and secondary operations. When using 5C, 16C, 20C, 25C collets or
guaranteed to have a TIR of .001" or less. Special-accuracy collets are other collets with a 10° head angle, the ratio is 1:3. For every .001"
available that are guaranteed to have a TIR of .0002". Before investing change on the chucking diameter, the part will either pull back .003"
in a special-accuracy collet, check your standard collet – they usually or stick out .003" from the setup part. This can mean a total length
have a TIR of .0005" or better. variation of .009" when the chucking diameter varies .003". If the
print calls for a length tolerance less than .002", a standard collet
Why not buy a bargain collet? cannot be used. This is where the Dead-Length collet is ideal. If the
stock diameter varies .003", the finished part lengths will not vary
A bargain is possible because something has been compromised.
more than a few ten thousands of an inch (.0002" to .0005").
The head angle and bore are not in the 60+ Rockwell range.
The back bearing of the collet is not held to precision size and
concentricity tolerances. The bore, head angle, back bearing and I have noticed that the threads and back
thread are not all concentric with each other. Because the collet is bearing on our collets are being damaged
softer than a Hardinge collet, it will wear very quickly. A precision
hardened and ground collet can last for years.
and have to be replaced. How can I eliminate
this expense?
When should I use an emergency collet? Vises, vise-grips and pump pliers are probably the cause of your
problem. Purchase several collet wrenches for each style (5C, 16C,
It is used when:
20C, 25C, etc.) collet in your shop. These wrenches are keyed
• You need a collet bore to run as close as the spindle’s TIR; an and locate over the back bearing of the collet to hold it while the
emergency is bored in place in the machine’s spindle. threaded stop, Dead-Length assembly, etc., are tightened into the
• A hardened and ground collet is necessary for any long run or collet.
high wear situation. But, if one doesn’t exist in your inventory,
an emergency collet can be quickly bored to size. It allows
the job to get in the schedule while waiting for delivery of the What is the difference between the
hardened and ground collet. Dead-Length Collet and the Dead-Length
• A job consisting of a couple hundred parts and the proper size Spider-Stop Step Chucks?
hardened and ground collet is not available.
The Dead-Length Collet uses the face of the spindle as its
Points to consider: The head angle and the collet bore are not locating surface for the inner collet. Because the spindle doesn’t
heat treated on emergency collets and will wear quickly under heavy move when the draw bar pulls the collet back, the inner collet also
or long use. The rule of thumb for the life of the bore and leaf doesn’t move, resulting in length control. The Dead-Length Spider-
tension of an emergency collet is 300 to 500 pieces. The threads Stop Step Chuck uses a spider stop that fits inside the slots of the
are heat treated but the leaves of the collet are not spring tempered. step chuck and locates against the collet seat (angle) of the spindle.
This results in the collet leaves losing their elasticity. Eventually you Because the collet seat doesn’t move when the draw bar pulls back
will not be able to put the part in the collet because the leaves have the step chuck, neither does the spider stop or the workpiece.
lost their tension. There is an internal thread in the face of the spider which accepts
the male thread in the stop button. The customer has to bore out
Is there an adapter that allows me to use my the step chuck to accommodate the stop button. The stop button is
machined to conform to the location point of the workpiece.
5C collets in the 16C spindle?
Yes, there is a 16C-to-5C collet adapter which accepts 5C collets.
There are many limitations, however. The major one is concentricity. Is there ever a reason I would use a Dead-
Because of the number of parts in the assembly, the TIR will be .002" Length® Spider-Stop Step Chuck for small
or more. If you are a production shop, you should not consider the
adapter except for emergency situations. It takes about 15 minutes
diameter work?
to change a collet. When doing secondary work, it will not be Yes. Occasionally a customer finds that the standard 5C Dead-
possible to hold concentricity of less than .002". Adapters are also Length Collet does not allow them to hold their parts to the print’s
available for 20C-to-16C and 25C-to-16C. concentricity requirements. A Dead-Length collet does not run
as concentric as a hardened and ground collet even though it may
be bored in place. This is because of the allowances between the
moving parts. A Dead-Length Spider Step Chuck is identical to a
standard collet; there is only one moving part — the step chuck.
This attribute will allow closer concentricities between chucking and
machined diameters than with a standard Dead-Length collet.

46
 WORKHOLDING

Frequently Asked Questions

I have a 6" diameter part which I want to hold in a Dead-Length Spider-Stop

Step Chuck, but it has a maximum size of 4". What can I do?
Order a special Dead-Length step chuck. Request Hardinge Brochure #2285, “Precision Length Control", which describes
many ways to control length and various ideas relating to step chucks.

I have a part that requires internal gripping. After turning, I want to take it
to a mill for additional work but still want to grip on the ID. What are my
options?
There are two options – The "Master Expanding Collet" and the "Sure-Grip® Collet-Style Expanding Collet." Both of
these can be taken to an index fixture or dividing head that has a 5C or 16C collet seat. The Master Expanding Collet
uses interchangeable pads which can be removed and stored. This unit is opened with a draw plug that actuates the
collet in the front. It is mainly for light-duty machining. The Sure-Grip Collet-Style Expanding Collet system will also work.
The collets are parallel opening and have a range from .125" to 4". This system, in the larger sizes, can handle heavy-duty
machining operations.

I have Style "S" Master Collets on my multi-spindle automatics.

Can I use them on my CNC Lathe?
Possibly. If you’re doing bar work, they work very well. The Style "S" Master Collet system was developed for use on
multi-spindle automatic bar machines where collet runout is of very little concern. Secondary work on CNC machines
requires very good collet concentricity, usually better than .001" TIR. Style "S" Master Collet system’s TIR could be as high
as .004" to .008", making them unacceptable for secondary work. Emergency pads will work in an emergency. Once you
remove them, they cannot be used to run the same job again as their TIR will be unacceptable.

Will threaded collet stops help me hold lengths?

No. If the diameter of the part being gripped is held to a very close tolerance, the answer could be yes. Unfortunately the
stop is attached to the collet, which draws back with the draw bar. For every .001" variation in the chucking diameter, the
collet will draw back or stick out .003". The main purpose of a collet stop is to eliminate the push-back of the part while
it is being machined, or to automatically eject the part when the collet is opened.

Why do I have to use a stop plate with my Sure-Grip Expanding Collet?

The expanding collet is pulled back with a draw plug to open it. If the chucking ID of the parts vary, the collet will pull
back or stick out farther than the previous piece. The Stop Plate eliminates the movement of the part and also stabilizes
it for heavy stock removal.

What is the correct procedure for boring out an emergency collet or step
chuck?
Insert the collet in the spindle with the draw bar in the full open position. Make certain that all the pins are in the face of
the collet or step chuck. Adjust the collet closer until closed on the pins and then back off 1⁄8 to 1⁄4 of a turn. DO NOT
back off enough to where the collet angle is not fully seated in the spindle. Lock the draw bar in this position. Decrease
the chucking force as much as possible (do not use the same force you would to grip the part). Close the collet. If you
can pull the pins out, you should increase the chucking pressure until the pins cannot be removed. Rough and finish the
bore to the chucking diameter of the part. Remove the collet or step chuck and deburr it. Thoroughly clean the spindle,
step chuck, closer and then remount them. Adjust the collet closer for proper gripping and the correct draw bar pressure
to hold the workpiece.

I have a part with a 9" chucking diameter to be run on my QUEST® 8/51

Lathe. I want to hold it in a step chuck which will allow me to run at my
machine’s maximum rpm. Your catalog lists the largest step chuck as 8".
Can I get a larger step chuck and closer?
Yes. We have a full department set up to make special spindle tooling to help you with any situation you may encounter.
You are right about using a step chuck and closer. If your part has a good chucking diameter (+.001", -.003"), you will be
more productive than when holding the part in a 3-jaw power chuck. As with the jaw chuck, it is necessary to check for
turret tooling interferences.
47
 Spindle Tooling for Manual & CNC Lathes

Collets for Automatics, Turret Lathes & Rotary Transfer Machines

Swiss-Type Collets, Guide Bushings & Barloader Collets

FlexC™ Collet Systems

Sure-Grip® Expanding Collet Systems

HQC® Quick-Change Collet Systems

HCAC® Collet Adaptation Chucks

Sure-Grip® 3-Jaw Power Chucks

Chuck Jaws

Toolholder Collets, Bushings & Tool Holders

Precision CNC Tooling for Mills

Collet Blocks

Rotary Indexing Products

Custom Workholding

Machine Tools

Hardinge manufactures workholding for all brands of lathes, mills, grinding

machines, automatic screw machines, rotary transfer machines, turret lathes,
automation and assembly. Expect more from your workholding. Choose
Hardinge precision and reliability for increased productivity and value!

Call us today, we’ve got your answer.

Hardinge Inc. One Hardinge Drive | P.O. Box 1507 | Elmira, New York 14902-1507 USA
USA: 800-843-8801 | Canada: 800-468-5946 | Fax: 607-734-3886
To Order Online: www.shophardinge.com | Corporate Homepage: www.hardinge.com | E-mail: [email protected] | Live Support: www.shophardinge.com

All specifications subject to change without notice. All marks indicated by ™ and ® are trademarks of Hardinge Inc. Brochure #2348G • Litho in USA • ©Hardinge Inc. 2010 • 3M May 2010