Scribd
Upload
9 views2 pages

Mid Term

This document contains 5 questions related to circuit analysis: 1. Determine the voltage across a 1-mH inductor at specified times. 2. Find expressions for the current and voltage in a circuit after an instantaneous switch change. 3. Derive an expression for current in a given circuit and determine its neper and resonant frequency. 4. Provide steps to find the complete response formula for the voltage in a given circuit, including initial conditions, steady state, and transient responses. 5. Obtain the current in a circuit given the voltage across a resistor in the time domain.

Uploaded by

Saleh Rashid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
9 views2 pages

Mid Term

This document contains 5 questions related to circuit analysis: 1. Determine the voltage across a 1-mH inductor at specified times. 2. Find expressions for the current and voltage in a circuit after an instantaneous switch change. 3. Derive an expression for current in a given circuit and determine its neper and resonant frequency. 4. Provide steps to find the complete response formula for the voltage in a given circuit, including initial conditions, steady state, and transient responses. 5. Obtain the current in a circuit given the voltage across a resistor in the time domain.

Uploaded by

Saleh Rashid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

https://slideplayer.

com/slide/12145806/

Q1) The current through a 1-mH inductor is shown in figure below. Determine the voltage across the inductor at 1ms,
3ms and 5 ms. (5 - Marks)

Q2) The switch in the circuit shown in Figure below has been in position a for a long time. At the switch moves
instantaneously to position b. Find the numerical expression for i0 (t) when t ≥ 0. Find the numerical expression for v0 (t)
when t ≥ 0. (10 marks)

Q3: Drive the expression for i(t) for circuit given below. Determine neper and resonant
frequency. How this circuit behaves if R  ∞. (5 marks)

Q4: Find the formula for complete response of v(t) for the circuit given below.
(10 marks)
https://slideplayer.com/slide/12145806/

Hint:
 Step 1: Find initial conditions: v ¿ ¿ and d v ¿ ¿ ¿
(1.5 marks)
 Step 2: Find v ( ∞ ) or steady state response v ss ( t ) by calculatingi ( ∞ ).
(1.5 marks)
 Step 3: Turn off the independent sources and find the form of the transient response v t ( t )
by applying KCL or KVL. Once a second-order differential equation is obtained, determine
its characteristic roots. Depending on whether the response is over damped, critically
damped, or underdamped, obtain v t ( t ) with two unknown constants.
(5 marks)
 Step 4: The total response is now found as the sum of the transient response and steady-
state response
v ( t )=v ss ( t ) +v t ( t )
(1 marks)
 Step 5: Calculate the unknown constants of v ( t ) by using initial conditions in first step.
(1 mark)

Q5: If the voltage vo across the 2-Ω resistor in the circuit of below is: 90 cos (2 t ) V obtain is in
time domain. (10 marks)

You might also like