Scribd
Upload
7K views2 pages

Ss 1 Technical Drawing Exam

The document contains a technical drawing exam with multiple choice questions, short answer theory questions, and geometric construction questions. The multiple choice section covers topics like drawing tools, shapes, properties, and technical drawing basics. The theory questions ask about the importance of technical drawing and uses of reference lines. The construction section requires drawing specific angles, shapes formed from lines and points, bisecting lines, constructing shapes within other shapes, and dividing lines into parts. Accuracy and established title blocks are important for the constructions.

Uploaded by

Triplejayart
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
7K views2 pages

Ss 1 Technical Drawing Exam

The document contains a technical drawing exam with multiple choice questions, short answer theory questions, and geometric construction questions. The multiple choice section covers topics like drawing tools, shapes, properties, and technical drawing basics. The theory questions ask about the importance of technical drawing and uses of reference lines. The construction section requires drawing specific angles, shapes formed from lines and points, bisecting lines, constructing shapes within other shapes, and dividing lines into parts. Accuracy and established title blocks are important for the constructions.

Uploaded by

Triplejayart
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SS 1 Technical Drawing

SECTION A(Objective Test: Choose the option from a – d)


1. Freehand sketching involves the use of eraser ... and......... (a) Pencil, paper (b)Pencil,Scale
(c)Protractor ,divider (d)Sharpener, compass
2. All these are sizes of a drawing board EXPECT...........(a) A4 = 210mm * 297mm (b) A2= 470mm
* 650mm (c) A2 = 450mm * 650mm (d) A0 = 840mm * 1189mm
3. ……….. is drawn at the bottom right hand corner of the drawing paper (a)Information (b) Title
block (c) Lettering (d) dimensions
4. …………. are used to draw vertical lines by placing one side of the triangle containing the right
angle against the upper edge of the T-square (a) Drawing board (b)Setsquare (c) Tee square (d)
Drawing paper
5. ........... is used to draw arcs and circles (a) Pair of compass (b)Set square (c) Teesquare (d)
Drawing paper
6. Which of the following is not required in freehand drawing? (a) measurement (b) symmetry (c)
proportion (d) neatness
7. An acute angle is one which is less than…………(a) 60° (b)90° (c) 45° (d)35°
8. The drawing instrument used for measuring angles is ... ... ... . (a) Compass (b) ruler (c)
Protractor (d) Set square
9. …………. are plane figures bounded by four straight lines (a) Eccentric circle (b) Circle(c)
Quadrilaterals (d) Tangent
10. All these are the properties of a quadrilaterals EXPECT (a) They have equal vertex (b)It has all
four sides equal (c) all its angles are right angles (d) the diagonals are equal and they bisect each
other at the centre forming angle 90°
11. ……… is the process of putting down information on a drawing by means of letters,words and
numbers (a) Information (b) Title block (c) Lettering (d) dimensions
12. ………….. are used for angular measurements. (a) Pair of compass (b) Set square (c)Tee square
(d) Protractors
13. Which of the following instrument is used to transfer measurement from one point to
another(a) A pair of compasses (b) A pair of divider (c) Protractor (d) Set square
14. A straight line is the shortest distance between …….. points (a) 3(b) 6 (c) 4 (d) 2
15. Center lines are used to locate or represent the centers of ________.
(a) arcs (b) circles (c) hidden round features (d) all of the above
16. We use ……… for setting paper on the drawing board (a) Pencil (b) Tee square (c) Setsquare (d)
Compass
17. The drawing instrument used for measuring angles is ………. (a) Compass (b) ruler(c)
Protractor (d) Set square
18. These are importance of technical drawing EXCEPT (a) It develop our skill (b) It helpto
interpret drawing (c)Means of communication (d) It gives us information aboutevents
19. Pencil for lettering should be sharpen to……… point(a) double (b)Curve (c) Conical(d)fine
20. Drawing materials and instrument should be ……….. (a) Handle with care (b)Handleroughly (c)
Kept in the roof (d) Played with always

SECTION B: Theory (10 marks)


Answer all in this section

I．'Technical drawing is the language of engineers and architects' Explain.


II．Expatiate the uses of a reference line in most technical drawing.
III．A horizontal line AB with a length of 60mm is drawn, with a perpendicular line drawn
from point B, ending at point C such that CB is 40mm. A parallel line is drawn from point C,
extending 40mm to point D. When all points (A, B, C, D) are connected, they form a specific
shape. What is the name of this shape?

SECTION C : Geometric Construction (30 marks)


Answer any one in this section

Note: Use full scale for all your construction works and dimensions should be in millimeters.
A well established border line and title block make up 20% mark in this section.
All construction lines must be shown clearly. Accuracy and good draughtsmanship are essential.

QUESTION 1
a. Construction the following angles
i. 165° ii. 112.5°
b. A line AB, with a length of 50mm, is parallel to line CD, positioned 40mm away, and also has a
length of 50mm. Assuming that point D is perpendicular to the midpoint of AB, when connecting
points C and A, as well as points D and B, what is the name of the shape formed?
(NB: AB=50mm ,CD=50mm)

QUESTION 2
a. A circle is inscribed in a triangle with sides
60mm , 80mm and 100mm.
i. Construct .
ii. What size is the radius of the circle.
b. Bisect a line AB of length 75mm.

QUESTION 3
a. Construct an octagon with a circle of radius 50mm.
b. Divide a line AB of length 50mm into 7 parts.

You might also like