PRODUCT SPECIFICATION video management solutions

SM5200 System Manager

DISTRIBUTED SYSTEM MANAGEMENT AND SECURITY PLATFORM

Product Features
• Manages Endura® IP Video Management System
• Administers Rights and Privileges for All Endura Users
• Stores and Administers Secure Keys for System Level Security
• Logs Errors and Alarms
• Provides DHCP Address Management for Endura Components
• Functions as a Time Server (NTP) for All Devices on the
• Browser Interface Supports Live View, Search, Playback, and
Endura Network
Video Export
• Supports Failover Services for System Redundancy
• Includes up to 16 TB of Storage in a RAID 5 Configuration to Host
• Acts as a Gateway, Providing Access to Endura over a Public Network Exported Video
• Includes Web Interface for Easy Configuration • Supports IPv6 Over Public-Facing Network Interface
• Online Video Transcoder Supports Browser-Based Access to Cameras • Browser Interface Supports H.264 Video Using the Pelco Media
and Low Bandwidth Networks Plugin (PMP)

ENDURA SYSTEM MANAGEMENT

The SM5200 is a network appliance that serves as the system The SM5200 hosts the Endura Script Manager, allowing scripted
management component of the Pelco Endura® system. The SM5200 responses to be executed on a given alarm condition, a programmed
manages the discovery and registration of all Endura components schedule, or by manual initiation. The unit also hosts an NTP server,
and cameras on the network. enabling the SM5200 to act as an NTP proxy between an atomic or
GPS-based NTP server and the components on the Endura network.
When registering Pelco cameras and encoders, the SM5200 acts as
In the absence of an external NTP server, the SM5200 can act as the
a secure key server. Acting as a secure public/private key exchange
time source for Endura cameras and servers; however, the system
allows Pelco video encoders and cameras to securely sign
will be subject to time drift inherent with COTS servers. The SM5200
compressed video. This can be used to authenticate video from the
also provides a DHCP server that can issue and manage DHCP
source as needed for law enforcement agencies or other evidentiary
addresses and leases for Endura components and cameras on the
requirements.
network.
The SM5200 monitors the health and functionality of all components
The SM5200 is designed for the demands of a mission critical
on the network. Device diagnostics are logged in the SM5200’s
surveillance system. To ensure continuous uptime, the SM5200 is
database. In addition, the SM5200 logs user activities such as logon,
equipped with two solid state drives (SSD) containing the operating
logoff, alarm response, and initiation of video export.
system in a RAID 1 configuration. In addition, redundant fans and the
As a management server, the SM5200 hosts user rights and option of RAID 5 storage for exported video content provide
permissions. Credentials are authenticated with the SM5200’s insurance against hardware failures that could compromise data
database before allowing a user to log onto any Endura client. integrity. Users can also configure a series of up to 24 SM5200s to
Endura clients work in conjunction with user configurations stored in act in a failover capacity; the members of the failover cluster can be
the SM5200 to expose functions and language preferences prioritized to take over system management responsibilities should
configured for each role and user account. This improves operator the primary unit fall offline.
efficiency and minimizes training requirements. The SM5200 can
Dual Gigabit Ethernet network ports allow the SM5200 to act as a
also interact with an LDAP server supported by Microsoft®
proxy between two networks, enabling network administrators to
Active Directory® for user authentication.
manage the impact of surveillance video on shared network links.
Network port 1 is available for Endura network traffic. Network
port 2 supports IPv6 and is used for remote access only.

International Standards
Organization Registered Firm;
ISO 9001 Quality System

C4687 / REVISED 12-12-14

TECHNICAL SPECIFICATIONS

WEB INTERFACE FOR REMOTE ACCESS

The SM5200 provides a browser-based interface for remote video viewing with minimal overhead*. Administrators with appropriate permissions can
enable or disable remote access to the SM5200 through the WS5200, and limit the bandwidth available from the server to remote browsers through
the system manager’s Web interface. This allows administrators to effectively manage the impact on shared networks. For security purposes, all
remote access is initiated using HTTPS over a configurable, secure port. Administrators can also grant or limit user access to remote live view, search,
playback, and export functions.
A browser-based status dashboard provides vital diagnostic information on the health of the system. Administrators with the proper credentials can
remotely view the status of the hardware and configure the SM5200 through a Web browser. Integrated SNMP services can also provide network
administrators with hardware and software status information.
The SM5200 Web interface allows users to stream live or recorded video in either motion JPEG or H.264 formats. The SM5200’s online, real-time
transcoder can convert up to 16 high resolution, high bit rate IP streams from megapixel cameras into MJPEG frames, enabling users to stream video
from compatible browsers without installing additional software. Installing the Pelco Media Plugin allows users to stream full-quality H.264 video
directly from the system manager through their browser†. The system manager can serve up to 32 H.264 streams and 16 MJPEG streams
simultaneously.
A single user can view up to 16 streams of live video footage across network bandwidths as low as 256 kbps. On networks limited to 128 kbps, users
can view up to four feeds in a 2x2 window. Users with appropriate credentials can also search for recorded video on Pelco NSM5200 units by camera,
time, date, and recording triggers (manual, continuous, motion, or alarm). Search results can be viewed in a 1x1 interface with standard play, pause,
fast-forward, and rewind functions, as well as a scrub bar to quickly pinpoint the segment of video required for an investigation.
Recorded video segments can also be exported through the Web interface. Video clips exported from the Endura network are automatically stored
on the SM5200’s integrated storage array for safekeeping and future download. Videos are stored in the proprietary PEF format. This is the native
format of the cameras involved and ensures that videos retain their original resolution and authentication signatures, supporting their use for
evidentiary purposes.
This Endura distributed, network-based product is available only to certified dealers/integrators. Please contact your local sales representative for details on certification applications and
requirements. Additional information on Endura products and certifications may be found at http://www.pelco.com/endura.
*The system manager Web interface is designed for light to moderate Endura users. When accessing Endura in installations with 1,500 cameras or more, the
WS5200 client software should be used.
†
To view video using the Pelco Media Plugin (PMP), UDP port 57341 must be open and the client must be able to receive unobstructed UDP traffic directly from
the system manager.
TECHNICAL SPECIFICATIONS

SYSTEM ENDURA COMPONENT COMPATIBILITY NOTES

Processor Intel® Xeon® E3-1275 v3 The SM5200 is compatible with current and legacy Endura system
Internal Memory 16 GB DDR3 RAM ECC components. Please note minimum software version requirements where
applicable:
Internal Storage
SSD* 120 GB
HDD† 4 TB Current Endura Components
USB Ports 3 USB 2.0 ports (1 front, 2 rear) • WS5200/WS5070: Must be upgraded to version 2.5.3.10286 or later to
2 USB 3.0 ports (rear) configure operator access to the system manager Web interface.
*Drives 1 and 2 are SSD drives operating in a RAID 1 array, mirroring • WS5000/WS5050/WS5060: Compatible with the SM5200 when used as
a replacement for the SM5000. The user interface must be upgraded to
the operating system.
† leverage the web browser and transcoding capabilities of the SM5200.
Drives 3 to 6 are HDDs operating in a JBOD or RAID 5 configuration, • VCD5202: No compatibility restrictions. When using the VCD5202 with
depending on the number of drives present in the array. the KBD5000 keyboard, user passwords are restricted to alphanumeric
characters unless using a USB keyboard to log on.
NETWORK • WS5200-MAP: No compatibility restrictions. The Endura Mapping server
installer is not required to use WS5200-MAP with the SM5200.
Interface 2 Gigabit Ethernet RJ-45 ports (1000Base-T) • NET5402R-HD: No compatibility restrictions.

REMOTE CLIENT REQUIREMENTS Legacy Endura Components

Supported Web Browsers Microsoft® Internet Explorer® 9, Mozilla® • WS5000/WS5060/WS5070: There are no compatibility restrictions
Firefox® 8‡, Google Chrome™ 17 or later when using the SM5200 as a replacement for the SM5000. You must
upgrade to the WS5200/WS5070 to utilize the SM5200’s remote access
Note: The system manager Web interface is designed for light to moderate capabilities.
Endura users. When accessing Endura in installations with 1,500 cameras or • GW5000/NET5301TC: No compatibility restrictions. The GW5000 and
more, the WS5200 client software should be used. NET5301TC can continue to be used for their respective functions
‡
To access the system manager over IPv6 using Mozilla Firefox, the independently of the SM5200’s remote access capabilities.
IPv6 address must be resolved through a DNS server or through the • VCD500x: User passwords must be alphanumeric unless using a USB
host file on the local machine. keyboard to log on.
• NET5301R: No compatibility restrictions.
WEB INTERFACE COMPATIBILITY • NVR51xx/SEB51xx: No compatibility restrictions. Footage on NVR51xx
units cannot be queried for remote search, playback, or export from the
Live View and playback/export features of the system manager Web interface SM5200.
are not available from all Endura components. The table below lists the Web • DVR53xx: No compatibility restrictions. Footage on DVR53xx cannot be
interface features available from legacy cameras, current cameras, encoders, queried for search, playback, or export from the SM5200.
and recorders. • DVR51xx: No compatibility restrictions in EnduraEnabled environments.
Device Live View Playback/Export Footage on EnduraEnabled DVR51xx units cannot be queried for search,
ENC5308/ENC5316 playback, or export from the SM5200.
•
Through DVR53xx
NVR5000 N/A
NVR5100 N/A
NET53xxT •
NET54xxT •
NSM5200 N/A •
®
Sarix •
Third-Party Cameras
•
Through UDI5000-CAM
UDI5000-MTRX •
TECHNICAL SPECIFICATIONS

MODELS ENVIRONMENTAL
Model numbers for the SM5200 consist of the base model, the amount of Operating Temperature 10° to 35°C (50° to 95°F)
video storage, and the country in which the unit will be used. For example, a Storage Temperature –40° to 65°C (–40° to 149°F)
unit with 16 TB of video storage with a power cord for use in the United Operating Humidity 20% to 80%, noncondensing
Kingdom is SM5200-16-UK.
Maximum Humidity Gradient 10% per hour
Model Video Storage Country Code Operating Altitude –15 to 3,048 m (–50 to 10,000 ft)
US = North America Operating Vibration 0.25 G at 3 Hz to 200 Hz at a rate of
EU = Europe 0.5 octave/minute
4 TB UK = United Kingdom Note: The temperature at the unit air intake can be significantly
SM5200
16 TB CN = China higher than room temperature. Temperature is affected by rack
AU = Australia configuration, floor layout, air conditioning strategy, and other issues.
AR = Argentina To prevent performance failure and unit damage, make sure the
temperature at the unit is continuously within the operating
temperature range.
OPTIONAL ACCESSORIES
DS-EN-SSD-120GB Replacement 120 GB SSD for operating PHYSICAL
system
Dimensions 50.8 x 43.4 x 8.9 cm
DS-EN-HDD-4TB Replacement 4 TB HDD for data storage (20.0" D x 17.1" W x 3.5" H)
Mounting Rack or desktop (feet)
SUPPLIED ACCESSORIES Weight Unit Shipping
Power Cord 1 based on country designation; all cables are SM5200-04 17.1 kg (37.8 lb) 20.5 kg (45.1 lb)
3-prong, molded connector. 1.8 m (6 ft)* SM5200-16 18.9 kg (41.8 lb) 22.3 kg (49.1 lb)
Bezel Keys 2
Rack Mount Kit Brackets, rails, and hardware for mounting in CERTIFICATIONS/RATINGS/PATENTS
2 RU rack • CE, Class A; meets EN50130-4 standard requirements
SM5200-LIT Documentation and resource disc • FCC, Class A
• UL/cUL Listed
USB Flash Drive 1 for system migration
• C-Tick
*Units shipped to China do not include a power cord; a CCC approved • S-Mark for Argentina
power cord must be used to power this equipment when used in • CCC
China. • KCC
• U.S. Patent D527,390
POWER
Power Input 100 to 240 VAC, 50/60 Hz, autoranging STANDARDS/ORGANIZATIONS
Power Supply Internal • Pelco is a member of the MPEG-4 Industry Forum
• Pelco is a member of the Universal Plug and Play (UPnP) Forum
Power Consumption Operating Maximum • Pelco is a member of the Universal Serial Bus (USB) Implementers Forum
110 VAC / 60 Hz 223.0 W, 2.03 A, 761.4 BTU/H • Pelco is a contributor to the International Standards for Organization/
115 VAC / 60 Hz 215.5 W, 1.87 A, 735.7 BTU/H Electrotechnical Commission (ISO/IEC) Joint Technical Committee 1
220 VAC / 60 Hz 204.1 W, 0.93 A, 696.8 BTU/H (JTC1), “Information Technology,” Subcommittee 29, Working Group 11
• Compliance, ISO/IEC 14496 standard (also known as MPEG-4)
FRONT PANEL INDICATORS/FUNCTIONS • Compliance, International Telecommunication Union (ITU)
Buttons Power Recommendation G.711, “Pulse Code Modulation (PCM) of Voice
Frequencies”
Indicators
Power Blue
Unit Status Green, amber, red
Network Port 1 Green, amber, red
Network Port 2 Green, amber, red
Software Status Green, amber, red
Drive Status (6X) Green, amber, red

NOTICE: Judgment as to the suitability of the products for users’ purposes is solely
the users’ responsibility. Users should refer to the Operation manuals for cautionary
statements regarding user selected options and how they might affect video quality.
Users shall determine the suitability of the products for their own intended application,
picture rate and picture quality. In the event users intend to use the video for evidentiary
purposes in a judicial proceeding or otherwise, users should consult with their attorney
regarding any particular requirements for such use.

Pelco by Schneider Electric Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
3500 Pelco Way, Clovis, California 93612-5699 United States
ONVIF logo are trademarks of ONVIF Inc. All other product names and
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 services are the property of their respective companies.
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 Product specifications and availability are subject to change without notice.
www.pelco.com www.pelco.com/community ©Copyright 2014, Pelco, Inc. All rights reserved.