Scribd
Upload
51 views1 page

PA717C

This document provides information about the properties and testing results of ABS POLYLAC® PA-717C, a medium impact engineering thermoplastic. It lists various metrics like melt flow index, tensile strength, flexural modulus, impact strength, heat distortion temperature, and mold shrinkage and the test methods and conditions used to obtain these values.

Uploaded by

jdstore99
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views1 page

PA717C

This document provides information about the properties and testing results of ABS POLYLAC® PA-717C, a medium impact engineering thermoplastic. It lists various metrics like melt flow index, tensile strength, flexural modulus, impact strength, heat distortion temperature, and mold shrinkage and the test methods and conditions used to obtain these values.

Uploaded by

jdstore99
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

General ABS POLYLAC® PA-717C

Product Description: Medium impact

Properties ISO Test Method Test Condition Unit PA-717C

Melt Flow Index 1133 220℃×10KG ml/10 min 16

Mass Density 1183 23 ℃ g/cm3 1.04

50 mm/min, yield MPa 44


Tensile Strength 527
50 mm/min, break MPa 33

Tensile Elongation 527 50 mm/min % 30

Flexural Strength 2 mm/min MPa 69


178
Flexural Modulus 2 mm/min GPa 1.9

23 ℃ Notched KJ/m2 25
Izod Impact Strength 180/1A
-30 ℃ Notched KJ/m2 12

Charpy Impact 23 ℃ Notched KJ/m2 27


179
Strength -30 ℃ Notched KJ/m2 13

1 Kg,50 ℃/hr ℃ 103


Vicat Softening Temp. 306
5 Kg,50 ℃/hr ℃ 98

1.8 MPa Unannealed ℃ 82


Heat Distortion Temp. 75/A
1.8 MPa Annealed ℃ 97
Coefficient of Linear
Thermal Expansion
11359 - - 8.8 x 10-5

Flammability - UL-94 - 1.5mm HB

Mold Shrinkage 294-4 - % 0.4~0.7

Symbol 1043 - - >ABS<

January 16, 2017


Notes：These are typical properties only and are not to be construed as specifications. Users should confirm
results by their own test

The above statement is based on our current level of knowledge and covers the above products directly manufactured and supplied by CHI MEI
CORPORATION at the date of issue. CHI MEI CORPORATION makes no warranties, whether express or implied, and assumes no liability in connection
with any use of above information. Notwithstanding the foregoing, CHI MEI CORPORATION shall in no event be held obligated or liable for any claims
due to or arising from (i) any customer provided, consigned, materials and/or parts, which are incorporated or adopted in the products; (ii) any combination
of the products with material not provided or authorized by our company; (iii) any modifications to the products which are made or directed by customer; (iv)
our compliance with the specifications, instructions, and/or designs provided by customer; (v) any anti-trust, unfair competition and/or other unlawful
actions effected by customer; or (vi) any defects, infringement, breach and/or violation which are arising out of customer’s faults or otherwise not solely and
directly attributable to CHI MEI CORPORATION. In no event will CHI MEI CORPORATION be liable for any indirect, special, exemplary, punitive, or
consequential damages (including lost profits) of any nature whatsoever whether arising out of the purchase, shipment, unloading, handling, or use of any
product or otherwise.

You might also like